Oxide In Air Research Articles

The shear bond strength of orthodontic brackets after surface conditioning of Zirconia, Ceramic and E. max models

The current study aims to evaluate the shear bond strength (SBS) of metal orthodontic brackets after surface conditioning by hydrofluoric acid (HF) and aluminum oxide air abrasion (Al2O3) and using two prime types and to determines the adhesive remnant index (ARI). We compared the bond strength of different types of models (full glazed zirconia, ceramic faced zirconia and E. max faced zirconia) with different surface conditioning methods for attaching metal orthodontic brackets. The study used 60 models for each material, divided into subgroups based on the type of prime material and surface preparation method. The bond strength was measured using a universal testing machine and the results were analyzed using statistical software. Shear bond strength of the Aluminum oxide was statistically (p<0.05) higher than the hydrofluoric acid and control groups in all groups (full glazed zirconia, ceramic faced zirconia and E. max faced zirconia). The Assure® Plus primer with Aluminum oxide surface treatment give rise to the highest shear bond strength than 3M™ Transbond™ XT, while there was no significant difference between Assure® Plus and 3M™ Transbond™ XT primer for both control and hydrofluoric acid groups. The highest shear bond strength was obtained with Aluminum oxide conditioning method for all types of ceramic materials used in this study.

Application of an integrated device for ultra-low temperature desulfurization and denitration in large rotary kiln

To tackle the problem of excessive nitrogen oxide emissions during the denitration process of the lime rotary kiln at Beitai Iron Mine, it was proposed to integrate ultra-low temperature SCR denitration catalysts and a moving-burden bed reactor into a radial combined desulfurization and denitration device to achieve ultra-low temperature denitration in a low-sulfur state. The self-built integrated device features two desulphurization beds and one denitration bed, through which the flue gas passes successively in a radial flow manner. Industrial test results indicate that the denitration efficiency reached an average of 96.07% at temperatures ranging from 70 to 130°C during a 14-day test period, indicating a good denitration effect. The ultra-low temperature SCR denitration device has been put into use, effectively reducing nitrogen oxide emissions and air pollution, while also promoting the optimization and upgrading of the energy structure. The research results can provide a reference for the environmental management of mining and processing enterprises.

Revealing the Relationship between Critical Inlet Velocity and a Double-Layer Oxide Film Combined with Low-Pressure Casting Technology

In the context of low-pressure casting, an excessive inlet velocity may result in the introduction of an oxide film and air into a liquid metal, leading to the formation of a two-layer film structure within the casting. Such defects can significantly degrade the mechanical properties of the castings. In order to optimize the advantages of low-pressure casting, an empirically designed equation for the inlet velocity was formulated and the concept of critical inlet velocity was further refined. A comprehensive numerical simulation was conducted to meticulously analyze the liquid metal spreading phase within the cavity. Subsequently, low-pressure casting experiments were carried out with actual castings of an A357 alloy, using two different entrance velocities—one critical and the other exceeding the critical entrance velocity. Tensile test specimens were extracted from the castings for the comparative evaluation of mechanical properties. It was observed that the average tensile strength of specimens cast at the critical inlet velocity exhibited a notable 16% enhancement. In contrast, specimens cast at velocities exceeding the critical inlet velocity manifested the presence of double oxide film defects. This evidence suggests that casting at a velocity faster than the critical inlet velocity leads to the formation of double oxide film defects, which in turn reduces the mechanical properties of the castings.

Battle of the Gases: How Air and Nitrous Oxide Affect Endotracheal Tube Cuff Pressure During General Anesthesia.

Background Endotracheal tube (ETT) cuff pressure changes during general anesthesia. Endotracheal cuff pressure ideally should be maintained between 20 and 30 cm of H2O. Cuff pressure of less than 25 cm of H2O increases the chances of aspiration while pressure of more than 40 cm of H2O causes tracheal mucosa damage. The study aimed to monitor and compare variations of endotracheal cuff pressure during general anesthesia with oxygen-air or oxygen-nitrous oxide. Methods This prospective, randomized, double-blinded, observational study was conducted on 40 patients. After approval from the institutional ethics subcommittee, 40 patients of either gender, aged 18-60 years, belonging to ASA grades I and II, who were undergoing elective surgery under general anesthesia, were enrolled in this study. The patients were randomly divided into two groups, with 20 in each group. In Group A, oxygen-air and Group N, oxygen-nitrous oxide was used as a gaseous mixture in general anesthesia with ETT. The ETT cuff pressure was recorded with the help of a cuff manometer at intervals of five, 10, 20, 30, 40, 50, 60, 70, 80, and 90 minutes after intubation. If pressure was more than 40 cm of H2O, it was reduced to 25-30 cm of H2O. Data were collected and analyzed using methods described in Primer of Biostatistics by Stanton A. Glantz. Quantitative data were analyzed using the Student's t-test. Qualitative data were analyzed using the chi-square test. Results An increase in cuff pressure was noted more in Group N as compared to Group A. The pressure in the endotracheal cuff started to gradually increase after 30-40 minutes in Group N after intubation, while in Group A, there was no significant increase. The average number of times the cuff deflated was 0.2 ± 0.41 in Group A and 1.55 ± 0.51 in Group N, which was highly significant. Conclusion Changes in endotracheal cuff pressure were observed when using different gas mixtures for inflation. Specifically, cuff pressure increased with oxygen and nitrous oxide compared to oxygen with air. This suggests that anesthetic gas composition can impact cuff pressure, potentially affecting tracheal mucosal perfusion and patient safety. Therefore, regular monitoring and adjustment of cuff pressure is crucial, especially when using nitrous oxide, to prevent complications and ensure optimal patient care.

To study the level of nitric oxide in exhaled air in pregnant women with bronchial asthma as a monitoring of disease control and prediction of asthma-associated obstetric complications: Observational comparative study

Aim. To determine the clinical significance of the level of nitric oxide in exhaled air (NOex) for optimizing the control of bronchial asthma (BA) in pregnant women in order to reduce asthma-associated obstetric complications. Materials and methods. A cohort comparative study was conducted with the participation of 80 pregnant women in the third trimester of pregnancy against the background of asthma with varying degrees of severity and level of control, with an assessment of the frequency of asthma-associated obstetric complications. The main group consisted of 40 patients with a prospective determination of the level of BA control and inflammatory activity against the background of inhaled glucocorticosteroid + long-acting b2-agonist using a study of nitric oxide levels in exhaled air. The comparison group included 40 patients undergoing therapy with inhaled glucocorticosteroids + long-acting b2-agonist or monotherapy with inhaled glucocorticosteroids with standard methods of outpatient monitoring of pregnancy against the background of asthma (without determining the level of NOex). The instrumental examination was presented by the determination of a surrogate noninvasive marker of inflammation – nitric oxide in exhaled air was determined using a portable NOex detection device (NIOX MONO; Aerocrine AB, Sweden). Results. The study of nitric oxide in exhaled air demonstrated the presence of poorly controlled inflammation of the mucous membrane of the respiratory tract in 22.5% of patients at the beginning of the third trimester, the average NOex values were – 18.75±2.86 ppb. A strong correlation was determined between the values of nitric oxide levels in exhaled air and systolic blood pressure in the third trimester in patients from the main group (Rs=0.84; Rs 0.05=0.31). Decrease in NOex averages (14.87±1.65 ppb) in pregnant women, it occurred as a result of changes in the volume of pharmacotherapy with inhaled glucocorticosteroids and measures to control the strict adherence of patients to anti-asthmatic therapy. Achieving complete control of asthma as a result of screening determination of nitric oxide in exhaled air and selection of optimal anti-asthmatic therapy was accompanied by a 2-fold decrease in the frequency of asthma-associated hypertensive disorders and surgical deliveries in pregnant women from the main group. Conclusion. Modern approaches to the monitoring and therapy of pregnant women with asthma should be based on the study of subclinical inflammation of the mucous membrane of the respiratory tract. The screening method for determining the level of a biomarker of inflammation of the bronchial tree epithelial mucosa – nitric oxide in exhaled air allows to determine the level of BA control, meets the requirements of maximum safety and minimally invasive for use in pregnant women.

A clinical case of atopic dermatitis with a rapid positive effect from the use of a genetically engineered biological drug in a teenager

Introduction. The instructions for the drug dupilumab indicate that the administration of a single loading dose on the first day leads to the rapid achievement of clinically effective concentrations within 2 weeks, which we saw in the example of our patient and her real clinical response to the first injection. Presentation of a clinical case. Under our medical supervision was a 17-year-old patient with severe atopic dermatitis, resistant to traditional therapy. Heredity for allergic pathology is burdened: the girl’s mother suffers from pollen allergy. Initially before the start of therapy: SCORAD — 88 points, EASI — 48.8 points, IGA — 4, blood eosinophils — 11 % (1188 cells/ml), total IgE — 1102.0 IU/ml; the content of nitric oxide in exhaled air (FeNO) is 30 ppb. On April 28, 2021, the patient was administered dupilumab at a dose of 600 mg. Assessment of atopic dermatitis control in points upon admission to the hospital 2 weeks after the first administration of dupilumab: on the SCORAD scale — 44.5 points; EASI — 13.8 points; IGA — 2 points, eosinophils — 9 % (1070 cells/ml); total IgE — 840 IU/ml; FeNO — 5 ppb. Conclusion. This clinical observation clearly illustrates the fact that patients with severe atopic dermatitis who don’t respond to first-line therapy can achieve positive clinical results after the first use of a recombinant human monoclonal antibody (IgG4).

Early-Life Exposure to Air Pollution and Childhood Asthma Cumulative Incidence in the ECHO CREW Consortium

Exposure to outdoor air pollution contributes to childhood asthma development, but many studies lack the geographic, racial and ethnic, and socioeconomic diversity to evaluate susceptibility by individual-level and community-level contextual factors. To examine early life exposure to fine particulate matter (PM2.5) and nitrogen oxide (NO2) air pollution and asthma risk by early and middle childhood, and whether individual and community-level characteristics modify associations between air pollution exposure and asthma. This cohort study included children enrolled in cohorts participating in the Children's Respiratory and Environmental Workgroup consortium. The birth cohorts were located throughout the US, recruited between 1987 and 2007, and followed up through age 11 years. The survival analysis was adjusted for mother's education, parental asthma, smoking during pregnancy, child's race and ethnicity, sex, neighborhood characteristics, and cohort. Statistical analysis was performed from February 2022 to December 2023. Early-life exposures to PM2.5 and NO2 according to participants' birth address. Caregiver report of physician-diagnosed asthma through early (age 4 years) and middle (age 11 years) childhood. Among 5279 children included, 1659 (31.4%) were Black, 835 (15.8%) were Hispanic, 2555 (48.4%) where White, and 229 (4.3%) were other race or ethnicity; 2721 (51.5%) were male and 2596 (49.2%) were female; 1305 children (24.7%) had asthma by 11 years of age and 954 (18.1%) had asthma by 4 years of age. Mean values of pollutants over the first 3 years of life were associated with asthma incidence. A 1 IQR increase in NO2 (6.1 μg/m3) was associated with increased asthma incidence among children younger than 5 years (HR, 1.25 [95% CI, 1.03-1.52]) and children younger than 11 years (HR, 1.22 [95% CI, 1.04-1.44]). A 1 IQR increase in PM2.5 (3.4 μg/m3) was associated with increased asthma incidence among children younger than 5 years (HR, 1.31 [95% CI, 1.04-1.66]) and children younger than 11 years (OR, 1.23 [95% CI, 1.01-1.50]). Associations of PM2.5 or NO2 with asthma were increased when mothers had less than a high school diploma, among Black children, in communities with fewer child opportunities, and in census tracts with higher percentage Black population and population density; for example, there was a significantly higher association between PM2.5 and asthma incidence by younger than 5 years of age in Black children (HR, 1.60 [95% CI, 1.15-2.22]) compared with White children (HR, 1.17 [95% CI, 0.90-1.52]). In this cohort study, early life air pollution was associated with increased asthma incidence by early and middle childhood, with higher risk among minoritized families living in urban communities characterized by fewer opportunities and resources and multiple environmental coexposures. Reducing asthma risk in the US requires air pollution regulation and reduction combined with greater environmental, educational, and health equity at the community level.

The Synthesis of carbon dots//zincoxide (CDs/ZnO-H400) by using hydrothermal methods for degradation of ofloxacin antibiotics and reactive red azo dye (RR141)

The development of photocatalytic powders to remove contaminants from air solutions is an important field of research in the field of environmental conservation. CD/ZnO-H400, a heterogeneous photocatalytic production, is utilized to degrade the reactive red dye and the antibiotic ofloxacin found in wastewater. This study explains the synthesis of carbon dots (CDs) derived from coconut air and zinc oxide (ZnO) using a hydrothermal method at a temperature of 180 °C with a duration of 4 h and subsequently calcinated at a 400 °C temperature for 4 h. This shows a significant improvement in photocatalytic performance due to improved delivery efficiency at the interface. The cost-efficient use of solar energy allows the comprehensive elimination of harmful pollutants through detoxification. The removal of the contaminant takes place through the first-order reaction, with RR141 showing the highest constant rate at 0.03 min−1, while ofloxacin has a constant speed at 0.01 min−1. The photocatalytic stability is measured after five cycles. The study also tested the impact of sunlight on degradation, showing a degrading rate of 98% for RR141 and 96% for ofloxacin. This study displays a new catalyst powder synthesized from carbon dots derived from the air, coconut and ZnO, showing remarkable photoactivity to completely remove harmful dyes and antibiotics from the surrounding environment.

Low Part-Per-Trillion, Humidity Resistant Detection of Nitric Oxide Using Microtoroid Optical Resonators.

The nitric oxide radical plays pivotal roles in physiological as well as atmospheric contexts. Although the detection of dissolved nitric oxide in vivo has been widely explored, highly sensitive (i.e., low part-per-trillion level), selective, and humidity-resistant detection of gaseous nitric oxide in air remains challenging. In the field, humidity can have dramatic effects on the accuracy and selectivity of gas sensors, confounding data, and leading to overestimation of gas concentration. Highly selective and humidity-resistant gaseous NO sensors based on laser-induced graphene were recently reported, displaying a limit of detection (LOD) of 8.3 ppb. Although highly sensitive (LOD = 590 ppq) single-wall carbon nanotube NO sensors have been reported, these sensors lack selectivity and humidity resistance. In this report, we disclose a highly sensitive (LOD = 2.34 ppt), selective, and humidity-resistant nitric oxide sensor based on a whispering-gallery mode microtoroid optical resonator. Excellent analyte selectivity was enabled via novel ferrocene-containing polymeric coatings synthesized via reversible addition-fragmentation chain-transfer polymerization. Utilizing a frequency locked optical whispering evanescent resonator system, the microtoroid's real-time resonance frequency shift response to nitric oxide was tracked with subfemtometer resolution. The lowest concentration experimentally detected was 6.4 ppt, which is the lowest reported to date. Additionally, the performance of the sensor remained consistent across different humidity environments. Lastly, the impact of the chemical composition and molecular weight of the novel ferrocene-containing polymeric coatings on sensing performance was evaluated. We anticipate that our results will have impact on a wide variety of fields where NO sensing is important such as medical diagnostics through exhaled breath, determination of planetary habitability, climate change, air quality monitoring, and treating cardiovascular and neurological disorders.

Акушерские осложнения в III триместре беременности у пациенток с бронхиальной астмой

Aim: to analyze the rate of asthma-associated obstetric complications in the third trimester of pregnancy, with attention to the severity and level of symptom control Patients and Methods: a retrospective phase involved the analysis of the course of the third trimester of pregnancy in 120 women with asthma. The women were divided into five groups: mild intermittent asthma (n=34), mild persistent controlled asthma (n=40), mild persistent poorly controlled asthma (n=10), moderate to severe persistent controlled asthma (n=26), and moderate to severe persistent poorly controlled asthma (n=10). The prospective phase included examination and treatment of pregnant women in the groups with uncontrolled asthma (n=20). The level of symptom control was assessed using the Asthma Control Test (ACT). Additionally, nitric oxide in exhaled air (NOex) was measured. The control group included 20 women without allergic disorders. Results: the study demonstrated an association between the level of symptom control and the development of associated hypertensive disorders. Severe preeclampsia was reported only in moderate to severe poorly controlled asthma. A significant correlation was revealed between ACT, NOex level, and de novo increase in systolic blood pressure (BP) in the third trimester (Rs=0.581; Rs=0.828). C-section was most often performed for fetal indications (acute hypoxia) in women with moderate to severe persistent poorly controlled asthma. These findings indicate that the choice of delivery method should be based on the level of symptom control at the end of the third trimester, rather than disease severity. Achieving complete control of asthma in pregnant women reduces the risk of acute fetal hypoxia and the rate of emergency C-sections. Conclusions: achieving and maintaining complete asthma control during pregnancy reduces the risk of associated obstetric complications and improves perinatal and maternal outcomes KEYWORDS: asthma, pregnancy, obstetric complications, hypertension, asthma-associated obstetric complications, C-section. FOR CITATION: Pashchenko A.A., Dobrokhotova Yu.E., Fomina D.S. Obstetric complications in the 3rd trimester of pregnancy in women with asthma. Russian Journal of Woman and Child Health. 2024;7(2):98–103 (in Russ.). DOI: 10.32364/2618-8430-2024-7-2-2.

Markers of eosinophilic airway inflammation in patients with asthma and allergic rhinitis.

Background: Measurement of airway inflammation is an important step to determine phenotype of asthma and allergic rhinitis (AR). Objective: To assess the level of nitric oxide in exhaled air (FeNO), nasal fraction of nitric oxide (nasal NO), their relationship with clinical control and blood eosinophils in patients with steroid-naive mild and moderate asthma and AR. Methods: One hundred forty-seven patients (65 men), ages 26-49.5 years (mean age, 32 years) with AR (n = 81) or AR and concomitant asthma (n = 46) and 20 healthy subjects were included in a single-center cohort study. All the patients underwent spirometry with reversibility test. Control of asthma and AR was assessed by using the Asthma Control Questionnaire and the visual analog scale, respectively. Levels of FeNO and nasal NO were measured by chemiluminescent analyzer, peripheral blood eosinophils were counted by automatic analyzer. Results: The FeNO level was significantly elevated in the patients with asthma and concomitant AR compared with the healthy subjects and was associated with control of both asthma and AR. There was no correlation between nasal NO and control of AR. Receiver operating characteristic analysis revealed that the level of eosinophils of 150 cells/μL may be a cutoff for lower airway eosinophilic inflammation. Blood eosinophils count was unable to distinguish eosinophilic and non-eosinophilic upper airway inflammation. Conclusion: We confirm that FeNO but not nasal NO is a marker of eosinophilic airway inflammation in patients with mild-moderate steroid-naive AR and concomitant asthma. A blood eosinophil level of ≥150 cells/µL may be a simple marker of eosinophilic airway inflammation in patients with asthma. However, its low specificity requires repeated measurements and use in combination with other biomarkers.

Effect of Surface Textures and Fabrication Methods on Shear Bond Strength Between Titanium Framework and Auto-Polymerizing Acrylic Repair Resin.

The aim of the study was to evaluate the effect of airborne particle abrasion (using different sizes of alumina particles) on the shear bond strength (SBS) between cast and milled titanium metal frameworks and auto-polymerizing acrylic repair resin. Forty flat cylindrical titanium disks were divided into two main divisions: cast and milled titanium. The two divisions were further subdivided into four groups based on metal surface treatment. Three particle sizes of aluminum oxide air abrasive powders (50µm, 110µm, and 250µm) were used for metal surface treatment by airborne particle abrasion. One group was the control group with no surface treatment. Auto-polymerizing acrylic repair resin was applied to all titanium disks. The specimens were subjected to SBS testing using a universal testing machine (Instron Corporation, Norwood, Massachusetts, United States). Surface evaluation was performed using a scanning electron microscope. One-way ANOVA was used for statistical analysis. The results showed a significant increase in SBS after airborne particle abrasion of both milled and cast titanium groups (p<0.001). The SBS was directly proportional to the size of the aluminum oxide particles. The milled titanium group showed higher SBS values than the cast group when the surface was not treated with alumina particles (p < 0.001) and when the surface was treated with the smaller particle sizes of 50 µm, whereas the cast group demonstrated higher SBS values than the milled group (p < 0.01) when the particle size was increased to 110 µm and 250 µm. It could be concluded that SBS between titanium metal frameworks and auto-polymerizing repair acrylic resin was directly related to the size of the alumina airborne particle abrasives. The fabrication method of the titanium frameworkalso influenced the SBS as the untreated milled frameworks demonstrated favorable SBS values compared to the untreated cast frameworks.

Differences in Performance and Conductivity Persistence of New Reduced Graphene Oxide Air Filter Materials before and after Eliminating Static Electricity.

Improving the filtration efficiency of air filter materials is an ongoing research goal. This study conducted in-depth research on a new reduced graphene oxide air filter material, and the differences in its performance and conductivity durability before and after eliminating static electricity were tested and analyzed. The results showed that the filtration efficiency of the reduced graphene oxide air filter material significantly decreased after eliminating static electricity. The maximum decrease in filtration efficiency was observed at a filtration velocity of 0.8 m/s, with PM10 > PM1.0 > PM2.5. In this case, the filtration efficiency decreased by 11.8%, 7.98%, and 7.17%, respectively. The maximum difference in filtration efficiency of 0.29 μm particulates was about 12.7%. Eliminating static electricity slightly increased the resistance (2.5~15.5 Pa). In addition, the new reduced graphene oxide air filter material exhibited good conductivity and stability after continuous testing. This study provides data support for the application of subsequent electrification sterilization, reference values for multi-angle applications, and the development of new composite air filter materials.

Reversible Solid Oxide Cells: Selection of Fuel Electrode Materials for Improved Performance and Durability

Introduction Reversible solid oxide cells (r-SOCs) are attractive electrochemical energy devices that can operate as both solid oxide fuel cells (SOFCs) for power generation, and solid oxide electrolysis cells (SOECs) for steam electrolysis (1). Renewable power generation, such as wind and solar, depends on daily weather conditions and so that it is desirable to adjust the supply of fluctuating electricity to match demand using reversible energy devices such as r-SOCs. The operational concept of r-SOCs is schematically described in Figure 1. The aim of this study is to examine the electrochemical properties and durability of r-SOCs using alternative fuel electrode materials. Experimental Various r-SOCs were prepared using conventional and alternative fuel electrode materials. As the conventional materials, Ni-cermet with Sc2O3-doped ZrO2 (ScSZ) was used for the fuel electrode; dense 200 mm thick ScSZ membrane for the electrolyte; and La0.6Sr0.4Co0.2Fe0.8O0.3 oxide (LSCF) air electrode with Gd-doped CeO2 (Gd0.1Ce0.9O2) acting as a buffer layer between the ScSZ electrolyte and the LSCF air electrode. As alternative fuel electrode materials, GDC and/or La0.1Sr0.9TiO3 (LST) were used as the fuel electrode backbone. By applying the co-impregnation procedure of Ni and GDC, fuel electrodes with highly dispersed nanoparticles of Ni catalysts and GDC, denoted as Ni-GDC/LST-GDC, were prepared (2,3). A Pt-based reference electrode was deposited beside the air electrode, such that the fuel electrode potential was measured as the voltage between the fuel and reference electrodes.Current-voltage characteristics were characterized, including voltage cycle tests performed by switching the direction of current simulating r-SOC operation. Long-term durability tests in SOEC and SOFC modes were conducted at 800°C. Air was supplied to the air electrode, while 50%-humidified hydrogen gas was supplied to the fuel electrode. The current density in the SOFC and SOEC modes is denoted as positive and negative values, respectively. Results and discussion Figure 2 shows fuel electrode potential as a function of current density in both SOFC and SOEC modes. The cells with the Ni-zirconia cermet, GDC, LST, LST-GDC, and Ni-GDC/LST-GDC could be operated in both modes. In the SOFC mode, the conventional Ni-zirconia cermet exhibited the highest fuel electrode voltage among these materials studied. In contrast, in the SOEC mode, the GDC-containing materials exhibited lower (i.e. better) fuel electrode voltage compared to Ni-zirconia cermet even without Ni catalysts, indicating enhanced electrocatalytic activity of mixed-conducting GDC for the electrode reactions with water vapor at the fuel electrodes. Voltage cycle durability up to 1,000 cycles and long-term durability up to 1,000 hours could be measured. Latest results on the durability with various electrode materials will be presented. Acknowledgements A part of this study was supported by “Research and Development Program for Promoting Innovative Clean Energy Technologies Through International Collaboration” of the New Energy and Industrial Technology Development Organization (NEDO) (Project No. JPNP20005). References Q. Minh and M. B. Mogensen, Electrochem. Soc. Interface, 22, 55 (2013).Futamura, Y. Tachikawa, J. Matsuda, S. M. Lyth, Y, Shiratori, S. Taniguchi, and K. Sasaki, J. Electrochem. Soc., 164 (10), F3055 (2017).Futamura, A. Muramoto, Y. Tachikawa, J. Matsuda, S. M. Lyth, Y, Shiratori, S. Taniguchi, and K. Sasaki, International J. Hydrogen Energy, 44 (16), 8502 (2019). Figure 1

Discovery of New Fast Oxygen Conductors: Bi2MO4x (M= rare earth, X= halogen) Via Unsupervised Machine Learning

Discovering new fast oxygen conductors is critical for developing many technologies, e.g., solid oxide fuel cells (SOFCs), solid oxide electrolysis cells (SOECs), proton ceramic fuel cells (PCFCs), and solid oxide air batteries, particularly for operation at lower temperatures (below 700 ˚C). By leveraging unsupervised machine learning techniques and large databases of computed materials data (e.g., Materials Project), we are able to rapidly explore and screen for new materials with high oxygen mobility. In this work, we used unsupervised machine learning analysis applied to features extracted from the structure of materials and discovered a new structural class of vacancy-mediated oxygen conductor. To do this, we applied the K-nearest neighbor (k-NN) algorithm on all the approximately 62,000 oxygen-containing compounds in the Materials Project database, using X-ray diffraction (XRD) and pair distribution function (PDF) data to represent the structural features. The neighbors of reference known for good oxygen conductors were screened with criteria relating to material stability, synthesizability, and electronic property dissimilarity (to ensure a novel material) compared to the reference material. Starting with the best-known oxygen conductor, the fluorite-type material, we examined the materials list of its nearest neighbors and identified the Bi2MO4X (M=Rare-earth element, X= halogen element) structural family as a novel group of fast oxygen conductors. In particular, Bi2LaO4Cl is a layered bismuth oxyhalide crystallized in the space group P4/mmm, adopting a “triple fluorite” layer [Bi2LaO4]+, balanced by the anion Cl- layer. The stability and mobility of oxygen vacancy in Bi2LaO4Cl were studied using Density Functional Theory (DFT) methods. 2+ oxygen vacancy is the most thermodynamically favorable defect type. Ab initio and machine learning-trained interatomic potential molecular dynamic simulations were performed to study the high temperature oxygen mobility in Bi2LaO4Cl. The simulation results show that Bi2LaO4Cl presents an extremely low migration barrier of 0.14 +/- 0.03 eV below 700 ˚C, suggesting 10 to 20 times higher ionic conductivity compared to yttria-stabilized zirconia (YSZ). Bi2LaO4Cl is an insulator with a wide band gap of 2.65 eV, indicating that Bi2LaO4Cl may be a promising electrolyte material with high oxygen ion conductivity and low electronic conductivity. This work demonstrates the power of combining unsupervised machine learning approaches with large materials databases for finding new fast oxygen conductors.

Reversible Solid Oxide Cells: Cycling and Long-Term Durability of Air Electrodes

Introduction Reversible solid oxide cell (r-SOC) enables both power generation and electrolysis, when the cell can be operated as a solid oxide fuel cell (SOFC) and as a solid oxide electrolysis cell (SOEC). Many studies are being conducted to improve their performance and durability (1,2).Lanthanum strontium cobalt ferrite (LSCF) is an air electrode material with a perovskite-type crystal structure which exhibits high electronic and ionic conductivity, oxygen diffusivity, and electrocatalytic activity (3). However, performance and durability of the cells with Sr-containing oxide air electrodes have to be carefully analyzed, as Sr ions tend to easily diffuse during sintering and in long-term operation, reacting with Zr ions from the solid electrolyte to form a highly resistance reaction layer such as SrZrO3 (4-6). While the performance and durability of LSCF-based air electrodes and the Sr diffusion in SOFC operation have been studied, there are still limited number of studies on the SOEC operation, and especially on the r-SOC operation. The diffusion of constituent ions such as Co and Fe may not be negligible in SOCs.Here in this study, we fabricate YSZ electrolyte-supported r-SOCs and conduct durability studies in both SOFC and SOEC modes. STEM-EDS observation of the air electrode materials is also made to investigate the durability and diffusion of various elements in the LSCF-based air electrode of r-SOCs. Experimental R-SOCs with yttria stabilized zirconia electrolytes (YSZ, 200 µm thick) were prepared. Ni-GDC co-impregnated fuel electrode was prepared, where a mixture of La0.1Sr0.9TiO3 (LST) and Gd0.1Ce0.9O2 (GDC) at a volume ratio of 50:50 was used as the porous electrode backbone, onto which Ni-containing solution of 1 µL was impregnated for Ni loading of 0.167 mg cm-2 (7). Gd0.1Ce0.9O2 (GDC) buffer layer was prepared between the electrolyte and the air electrode to prevent elemental diffusion (8). La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) was used for the air electrode. In addition, a Pt reference electrode was deposited onto the electrolyte on the fuel electrode side. The voltage measurement terminals of the electrochemical measurement setup were connected between the reference electrode and the air electrode to evaluate the air electrode potential. 50%-humidified hydrogen (100 ml min-1) was supplied to the fuel electrode, and air (150 ml min-1) was supplied to the air electrode. Negative current density means the value in the SOEC mode, while positive current density in the SOFC mode. Results and discussion As shown in Fig. 2 describing one cycle, current density was varied at 800°C for the 1000-cycle durability tests in the r-SOC operation. The range of current density was between -0.2 A cm-2 and 0.2 A cm-2. The air electrode potential at different current densities and the electrode impedance in every 100 cycles were measured. For the 1000-hour electrolysis durability test in the SOEC mode, current density of -0.2 A cm-2 was applied for 1000 hours at 800°C. The air electrode potential and the impedance in every 100 hours were measured (9). It has been found that a gradual degradation of the r-SOCs associated with an increase in air electrode potential in the SOEC mode and a decrease in the potential in the SOFC mode could be distinguished. However, such degradation tended to be stabilized with the number of cycles.STEM-EDS observations were performed to analyze the elemental distribution around the air electrode and the electrolyte in the cell. It was found that such elemental diffusion could occur during sintering and durability experiments.AcknowledgmentsA part of this study was supported by “Research and Development Program for Promoting Innovative Clean Energy Technologies Through International Collaboration” of the New Energy and Industrial Technology Development Organization (NEDO) (Project No. JPNP20005). Collaborative support by Prof. H. L. Tuller, and Prof. B. Yildiz at Massachusetts Institute of Technology (MIT) for their continuous support is gratefully acknowledged. Figure 1

Oral and nasal provocation test in chicken egg allergy—case report

IntroductionAllergy to chicken egg protein is a common form of food allergy. The most common clinical presentation includes gastrointestinal, skin, and respiratory symptoms. Differential diagnosis, including provocative tests, is critical in diagnosis.Case descriptionWe present a case of a 21-year-old patient with egg allergy, who underwent a double-blind food provocation test with placebo (evaluating subjective complaints from the gastrointestinal tract) and a titrated nasal provocation test using dry chicken egg content. We assessed the response of the nasal mucosa in the provocation test using the visual analogue scale (VAS), acoustic and optical rhinometry, as well as measurements of nitric oxide concentration in the exhaled air. During the provocation test, we measured the changes in the transverse section of the nasal passages, which were accompanied by subjective complaints measured with the VAS scale, using objective techniques. In the nasal provocation test with a dose of 20 µg of chicken egg protein, we observed an increase in the reactivity of the nasal mucosa and a decrease in the level of nitric oxide in the exhaled air from the upper airways (920 ppb before the provocation test and up to 867 ppb during the early stage of the allergic reaction). During the provocation tests, we recorded typical symptoms associated with the early stage of the allergic reaction; including nasal obstruction (1.2 cm), leakage of watery discharge (0.8 cm) in the food test, and itchy nose (1.1 cm) in the food test vs. the nasal test: 4.6, 2.8, and 3.5 cm, respectively.ConclusionsThe nasal mucosa provides convenient conditions for evaluation of the severity of allergy to common food allergens, including chicken egg allergens.

Estimation of the Forest Stand Biomass and Greenhouse Gas Emissions Using Lidar Surveys

At the research points, the relationship between the Normalized Difference Vegetation and Normalized Green Red Difference indices is characterized by a determination coefficient equal to 0.52. The estimation of the emission of carbon dioxide and nitrogen oxide in the forest air at an altitude of 40 m above the level of the soil cover during the growing season showed differences in their values during the daytime and at night. The results helped determine promising methods of inventory of the carbon landfill forest area for aboveground woody biomass assessment based on data obtained from several sources and land forest estimation research. The research involved: 1) integration of an unmanned aerial vehicle -based digital camera and lidar sensors in order to optimize the efficiency and cost of data collection; 2) taking advantage of high-resolution aerial photographs and sparse lidar point clouds using an information fusion approach and the ability to compensate for their shortcomings.

Experimental Study of the Factors Influencing the Regeneration Performance of Reduced Graphite Oxide Filter Materials under Water Cleaning.

With the normalization of epidemic prevention and control, air filters are being used and replaced more frequently. How to efficiently utilize air filter materials and determining whether they have regenerative properties have become current research hotspots. This paper discusses the regeneration performance of reduced graphite oxide filter materials, which were studied in depth using water cleaning and the relevant parameters, including the cleaning times. The results showed that water cleaning was most effective using a 20 L/(s·m2) water flow velocity with a 17 s cleaning time. The filtration efficiency decreased as the number of cleanings increased. Compared to the blank group, the filter material's PM10 filtration efficiency decreased by 0.8%, 19.4%, 26.5%, and 32.4% after the first to fourth cleanings, respectively. The filter material's PM2.5 filtration efficiency increased by 12.5% after the first cleaning, and decreased by 12.9%, 17.6%, and 30.2% after the second to fourth cleanings, respectively. The filter material's PM1.0 filtration efficiency increased by 22.7% after the first cleaning, and decreased by 8.1%, 13.8%, and 24.5% after the second to fourth cleanings, respectively. Water cleaning mainly affected the filtration efficiency of particulates sized 0.3-2.5 μm. Reduced graphite oxide air filter materials could be water washed twice and maintain cleanliness equal to 90% of the original filter material. Water washing more than twice could not achieve the standard cleanliness equal to 85% of the original filter material. These data provide useful reference values for the evaluation of the filter materials' regeneration performance.

Development of a novel C-dots conductometric sensor for NO sensing

Carbon dots (CDs, C-dots) obtained from waste produced during the production of olive oil in Calabria (Italy) have been investigated as a gas sensing material for the sensitive and selective detection of nitric oxide (NO) in air. The obtained CDs were characterized by XPS, FT-IR and ATR-FTIR. CDs were deposited to yield a sensitive layer on a conductometric platform and tested for gas sensing, showing promising characteristics for the selective monitoring of NO in air. The response of CDs composite to NO was 1.5 @ 1250 ppm and the response and recovery times amounted to 90 and 200 s, respectively. The sensing behavior of C-dots prepared using olive waste from a different geographic location (Puglia, Italy) was also reported and compared. It has been found that the sensing behavior of the two different materials based sensors investigated towards nitrogen oxides (NO and NO2) was completely different. On the one hand, the former exhibited selectivity towards NO. On the other, the latter showed prominent selectivity towards NO2. This behavior can be ascribed to the different functional groups exposed on the C-dots surface undergoing non-covalent interactions with a marked specificity of the hydroxyl and ethers moieties for NO and NO2, respectively.