Oxidative Addition-reductive Elimination Research Articles

Bidentate NHC‐Containing Ligands for Copper Catalysed Synthesis of Functionalised Diaryl Ethers

Diaryl and heteroaryl ethers are important and common motifs in drug discovery and agrochemicals. Here we present a catalytic system for the copper catalysed arylation of phenols with aryl halides. Bidentate N‐heterocyclic carbene ligands provide a well‐defined catalytic system that enable low loading of copper in effective coupling reactions (0.5 mol% Cu or lower). The reaction scope of aryl iodides and aryl bromides is developed, that is tolerant of functional groups and a library of biaryl ethers with lead‐like properties is prepared. The presence of excess ligand (in a 1:3 ratio) is shown to be optimal to prevent catalyst degradation, presumably by avoiding decomplexation of the ligand. This is also supported by the catalytic results obtained with pre‐formed copper complexes. The kinetics of the reaction are examined and shown to be first order in copper, supportive of a well‐defined catalyst species, first order in phenol and aryl iodide, and zero order in base under the developed conditions. Computational studies performed using Minnesota MN15‐L parametrisation method support an oxidative addition–reductive elimination pathway. Reductive elimination would be turnover limiting and occurr through an intimate ion pair intermediate.

Au Clusters Catalyze The Disulfide Metathesis Reaction By A Reductive Addition–Oxidative Elimination Mechanism

A plethora of industrial and academic organic chemical reactions are catalyzed by the well–known oxidative addition–reductive elimination (OARE) mechanism. However, the micro–reversed counterpart, i.e. the reductive addition–oxidative elimination (RAOE) mechanism, has to our knowledge not been reported yet in a catalytic manner. Here we show that a gold cluster can act as homogeneous catalyst capable of triggering a reductive addition step with disulfides, manage the incoming electrons and finally execute an oxidative elimination step, to perform the disulfide metathesis reaction. These findings suggest that not only new organic reactions but also other previously reported processes catalyzed by metal clusters may operate through the RAOE mechanism.

Palladium‐Catalyzed Regiodivergent Synthesis of 1,3‐Dienyl and Allyl Esters from Propargyl Esters

AbstractCatalyst‐controlled regiodivergent catalysis is a vital chemical tool that allows efficient access to large collections of structurally diverse molecules from a common precursor but remains a challenge. We report a catalyst‐controlled, tunable, and predictable regiodivergency in transforming the internal aliphatic propargyl esters into diverse libraries of highly substituted 1,3‐dienyl and allyl products by Pd‐catalysis. Depending on the ligand employed, the palladium catalyst can involve two typical approaches: electrophilic palladium catalysis and a sequential oxidative addition–reductive elimination pathway. This regiodivergent protocol endows facile access to four regioisomers with high regio‐ and stereoselectivity from the common propargyl esters. In terms of synthetic utility, a notable feature of this protocol is amenable to structural diversification of bioactive relevant molecules, enabling rapid assembly of many useful structural analogs of pharmaceutical candidates.

Palladium-Catalyzed Regiodivergent Synthesis of 1,3-Dienyl and Allyl Esters from Propargyl Esters.

Catalyst-controlled regiodivergent catalysis is a vital chemical tool that allows efficient access to large collections of structurally diverse molecules from a common precursor but remains a challenge. We report a catalyst-controlled, tunable, and predictable regiodivergency in transforming the internal aliphatic propargyl esters into diverse libraries of highly substituted 1,3-dienyl and allyl products by Pd-catalysis. Depending on the ligand employed, the palladium catalyst can involve two typical approaches: electrophilic palladium catalysis and a sequential oxidative addition-reductive elimination pathway. This regiodivergent protocol endows facile access to four regioisomers with high regio- and stereoselectivity from the common propargyl esters. In terms of synthetic utility, a notable feature of this protocol is amenable to structural diversification of bioactive relevant molecules, enabling rapid assembly of many useful structural analogs of pharmaceutical candidates.

Synthetic and computational studies on CuI/ligand pair promoted activation of C(Aryl)-Cl bond in C–N coupling reactions

Cu/ligand-mediated coupling reactions have been widely investigated in the recent past. However, activation of cheaper aryl chlorides is still a great limitation of these reactions. During the course of present investigations efforts have been made to develop a normal and facile CuI/ligand pair protocol for arylation of phthalimide using aryl chlorides. The protocol has also been extended for arylation of amines. On the basis of experimental and theoretical results, a catalytic cycle has also been proposed and it has been established that these reactions follow oxidative addition-reductive elimination (OA-RE) pathway. These studies have indicated that tetracoordinated [Cu(L1)(L2)]+ complex is active catalytic species in these reactions.

Rhodium Complexes in P−H Bond Activation Reactions

The feasibility of oxidative addition of the P-H bond of PHPh2 to a series of rhodium complexes to give mononuclear hydrido-phosphanido complexes has been analyzed. Three main scenarios have been found depending on the nature of the L ligand added to [Rh(Tp)(C2 H4 )(PHPh2 )] (Tp= hydridotris(pyrazolyl)borate): i) clean and quantitative reactions to terminal hydrido-phosphanido complexes [RhTp(H)(PPh2 )(L)] (L=PMe3 , PMe2 Ph and PHPh2 ), ii) equilibria between RhI and RhIII species: [RhTp(H)(PPh2 )(L)]⇄[RhTp(PHPh2 )(L)] (L=PMePh2 , PPh3 ) and iii) a simple ethylene replacement to give the rhodium(I) complexes [Rh(κ2 -Tp)(L)(PHPh2 )] (L=NHCs-type ligands). The position of the P-H oxidative addition-reductive elimination equilibrium is mainly determined by sterics influencing the entropy contribution of the reaction. When ethylene was used as a ligand, the unique rhodaphosphacyclobutane complex [Rh(Tp)(η1 -Et)(κC,P -CH2 CH2 PPh2 )] was obtained. DFT calculations revealed that the reaction proceeds through the rate limiting oxidative addition of the P-H bond, followed by a low-barrier sequence of reaction steps involving ethylene insertion into the Rh-H and Rh-P bonds. In addition, oxidative addition of the P-H bond in OPHPh2 to [Rh(Tp)(C2 H4 )(PHPh2 )] gave the related hydride complex [RhTp(H)(PHPh2 )(POPh2 )], but ethyl complexes resulted from hydride insertion into the Rh-ethylene bond in the reaction with [Rh(Tp)(C2 H4 )2 ].

Photosensitized oxidative addition to gold(I) enables alkynylative cyclization of o-alkylnylphenols with iodoalkynes.

The well-established oxidative addition-reductive elimination pathway is the most followed one in transition metal-catalysed cross-coupling reactions. While readily occurring with a series of transition metals, gold(I) complexes have shown some reluctance to undergo oxidative addition unless special sets of ligands on gold(I), reagents or reaction conditions are used. Here we show that under visible-light irradiation, an iridium photocatalyst triggers-via triplet sensitization-the oxidative addition of an alkynyl iodide onto a vinylgold(I) intermediate to deliver C(sp)2-C(sp) coupling products after reductive elimination. Mechanistic and modelling studies support that an energy-transfer event takes place, rather than a redox pathway. This particular mode of activation in gold homogenous catalysis was applied in several dual catalytic processes. Alkynylbenzofuran derivatives were obtained from o-alkynylphenols and iodoalkynes in the presence of catalytic gold(I) and iridium(III) complexes under blue light-emitting diode irradiation.

Mechanistic insights into silver(I)-mediated trifluoromethylation of aryldiazonium salts

The mechanism of silver(I)-mediated trifluoromethylation of aryldiazonium salts has been studied comprehensively with density functional theory (DFT). Three stages constitute the trifluoromethylation pathway, namely (i) dissociation of the aryldiazonium salt, (ii) formation of the key disilver(I) intermediate and (iii) disilver(I)-mediated oxidative addition/reductive elimination (OA/RE) reaction. Thereinto, oxidative addition is the rate-determining step in the whole reaction. A radical pathway can be ruled out according to the present calculations. Moreover, the counterion in aryldiazonium salt has great influences on the trifluoromethylation as follows: (i) affecting the dissociation of aryldiazonium salt; (ii) participating in the formation of disilver(I) intermediates.

π-Bond Character in Metal-Alkyl Compounds for C-H Activation: How, When, and Why?

C-H bond activation via σ-bond metathesis is typically observed with transition-metal alkyl compounds in d0 or d0fn electron configurations, e.g., biscyclopentadienyl metal alkyls. Related C-H activation processes are also observed for transition-metal alkyls with higher d-electron counts, such as W(II), Fe(II), or Ir(III). A σ-bond metathesis mechanism has been proposed in all cases with a preference for an oxidative addition-reductive elimination pathway for Ir(III). Herein we show that, regardless of the exact mechanism, C-H activation with all of these compounds is associated with π-character of the M-C bond, according to a detailed analysis of the 13C NMR chemical shift tensor of the α-carbon. π-Character is also a requirement for olefin insertion, indicating its similarity to σ-bond metathesis. This observation explains the H2 response observed in d0 olefin polymerization catalysts and underlines that σ-bond metathesis, olefin insertion, and olefin metathesis are in fact isolobal reactions.

Uranium doubles up as a catalyst

Reversible, two-electron redox processes in which a substrate is added and subsequently eliminated from a transition metal are a defining feature of most catalytic cycles. This behavior is typically unheard of, though, when it comes to lanthanide and actinide metals. The f-block metals are used as catalysts, but they tend to exhibit irreversible one- or multielectron oxidation or reduction steps, and the complete redox sequence hasn’t been observed in one reaction system. Researchers led by Stephen T. Liddle of the University of Manchester and Laurent Maron of the University of Toulouse have now found evidence that a uranium complex can satisfy all the criteria of classical single-metal, two-electron oxidative addition-reductive elimination, and they make a case that uranium can mimic traditional transition-metal catalysis (Nat. Commun. 2017, DOI: 10.1038/s41467-017-01363-0). The researchers added azobenzene to a uranium(III) triamide complex they previously reported to form a dimeric uranium(V) imido complex, which readily expels

Mechanistic Insight into the Cu-Catalyzed C-S Cross-Coupling of Thioacetate with Aryl Halides: A Joint Experimental-Computational Study.

The mechanism of the Ullmann-type reaction between potassium thioacetate (KSAc) and iodobenzene (PhI) catalyzed by CuI associated with 1,10-phenanthroline (phen) as a ligand was explored experimentally and computationally. The study on C-S bond formation was investigated by UV-visible spectrophotometry, cyclic voltammetry, mass spectrometry, and products assessment from radical probes. The results indicate that under experimental conditions the catalytically active species is [Cu(phen)(SAc)] regardless of the copper source. An examination of the aryl halide activation mechanism using radical probes was undertaken. No evidence of the presence of radical species was found during the reaction process, which is consistent with an oxidative addition cross-coupling pathway. The different reaction pathways leading to the experimentally observed reaction products were studied by DFT calculation. The oxidative addition-reductive elimination mechanism via an unstable CuIII intermediate is energetically more feasible than other possible mechanisms such as single electron transfer, halogen atom transfer, and σ-bond methatesis.

Mechanistic Studies of Ullmann‐Type C–N Coupling Reactions: Carbonate‐Ligated Copper(III) Intermediates

AbstractIn Ullmann‐type C−N coupling reactions, the involvement of CuIII species has been proposed many times on the basis of the oxidative addition–reductive elimination (OA‐RE) path for these reactions, but actual species could not be traced in experimental studies. In the C−N coupling reactions, carbonate and phosphate were considered widely as bases. In the present study, Cu‐mediated C−N coupling reactions of aryl halides and NuNH (amide and imide) were investigated extensively, and we provide direct spectroscopic evidence of actual CuIII species. For the first time, we reveal that carbonate and phosphate ions act as bidentate ligands as well as a base in the catalytic cycle, and thus the actual intermediate species is a carbonate‐ or phosphate‐ligated, distorted octahedral CuIII complex. Our experimental and computational studies have strengthened the hypothesis that these reactions follow an OA‐RE path.

General Copper-Catalyzed Coupling of Alkyl-, Aryl-, and Alkynylaluminum Reagents with Organohalides.

We report the first example of a very general Cu-catalyzed cross-coupling of organoaluminum reagents with organohalides. The reactions proceed for the couplings of alkyl-, aryl-, and alkynylaluminum reagents with aryl and heteroaryl halides and vinyl bromides, affording the cross-coupled products in good to excellent yields. Both primary and secondary alkylaluminum reagents can be utilized as organometallic coupling partners. These reactions are not complicated by β-hydride elimination, and as a result rearranged products are not observed with secondary alkylaluminum reagents even for couplings with heteroaryl halides under "ligand-free" conditions. Radical clock experiment with a radical probe and relative reactivity study of Ph3Al with two haloarenes, 1-bromonaphthalene and 4-chlorobenzonitrile, having two different redox potentials indicates that the reaction does not involve free aryl radicals and radical anions as intermediates. These results combined with the result of the Hammett plot obtained by reacting Ph3Al with iodoarenes containing p-H, p-Me, p-F, and p-CF3 substituents, which shows a linear curve (R(2) = 0.99) with a ρ value of +1.06, suggest that the current transformation follows an oxidative addition-reductive elimination pathway.

Silane–Allyl Coupling Reactions of Cp*(iPr2MeP)Fe(η3-C3H5) and Synthetic Access to the Hydrido–Dinitrogen Complex Cp*(iPr2MeP)FeH(N2)

Herein we report reactions of the iron allyl complex Cp*(iPr2MeP)Fe(η3-C3H5) with sterically demanding silanes. These reactions lead to stoichiometric hydrosilation of the allyl ligand and dehydrocoupling reactions between the silane and the allyl group. Furthermore, this system has allowed access to a novel Si–H oxidative addition–reductive elimination equilibrium involving Cp*(iPr2MeP)FeH2(SiH2DMP) and Cp*(iPr2MeP)FeH(N2), which was independently synthesized.

Mechanism of trifluoromethylation reactions with well-defined NHC copper trifluoromethyl complexes and iodobenzene: A computational exploration

Abstract Computational calculation was performed to investigate the mechanism of trifluoromethylation reactions of iodobenzene with well-defined N -heterocyclic carbene (NHC)-supported Cu I trifluoromethyl complexes. Four proposed reaction pathways, namely σ-bond metathesis (BM), concerted oxidative addition–reductive elimination (OARE), iodine atom transfer (IAT) and single-electron transfer (SET), have been computed by density functional theory (DFT). The result indicated that the concerted OARE mechanism is favored among the four reaction pathways, suggesting the trifluoromethylation may occur via concerted OARE mechanism involving Ar–X oxidative addition to the Cu(I) center as the rate determining step.

ChemInform Abstract: Removal of Amino Groups from Anilines Through Diazonium Salt‐Based Reactions

AbstractReview: [21 refs.

Removal of amino groups from anilines through diazonium salt-based reactions.

This minireview describes the applications of in situ generated diazonium salts from anilines in organic synthesis. In situ generation of diazonium salts from anilines represents an efficient and practical pathway, leading to a series of useful structures. In these transformations, the amino group of aniline formally acts as a leaving group. Two distinctive kinds of mechanisms, including transition metal (especially palladium)-catalyzed oxidative addition-reductive elimination and a radical process, are involved in the removal of amino groups from anilines, and both catalytic processes are described in this minireview.

Unraveling Organocuprate Complexity: Fundamental Insights into Intrinsic Group Transfer Selectivity in Alkylation Reactions

The near thermal conditions of an ion-trap mass spectrometer were used to examine the intrinsic gas-phase reactivity and selectivity of nucleophilic substitution reactions. The well-defined organocuprate anions [CH3CuR](-) (R = CH3CH2, CH3CH2CH2, (CH3)2CH, PhCH2CH2, PhCH2, Ph, C3H5, and H) were reacted with CH3I. The rates (reaction efficiencies, ϕ) and selectivities (the product ion branching ratios) were compared with those of [CH3CuCH3](-) reacting with CH3I. Alkyl R groups yielded similar efficiencies, with selectivity for C-C bond formation at the coordinated R group. Inclusion of unsaturated R groups curbed the overall reactivity (ϕ = 1 to 2 orders of magnitude lower). With the exception of R = PhCH2CH2, these switched their selectivity to C-C bond formation at the CH3 group. Replacing an organyl ligand with R = H significantly enhanced the reactivity (8-fold), resulting in the selective formation of methane. Unique decomposition and side-reactions observed include: (1) spontaneous β-hydride elimination from [RCuI](-) byproducts; and (2) homocoupling of the pre-existing organocuprate ligands in [CH3CuC3H5](-), as shown by deuterium labeling. DFT (B3LYP-D/Def2-QZVP//B3LYP/SDD:6-31+G(d)) predicts that the alkylation mechanism for all species is via oxidative addition/reductive elimination (OA/RE). OA is the rate-limiting step, while RE determines selectivity: the effects of R on each were examined.

Co+-Assisted Decomposition of h6-Acetone and d6-Acetone: Acquisition of Reaction Rate Constants and Dynamics of the Dissociative Mechanism

Reaction rate constants have been acquired for the gaseous unimolecular decomposition reaction of the Co(+)(OC(CH(3))(2)) cluster ion and its deuterium labeled analog. Each rate constant is measured at a well resolved cluster internal energy within the range 12,300-16,100 cm(-1). The weighted, averaged kinetic isotope effect (KIE), k(H)/k(D) = 1.54 ± 0.05, is about three times smaller than the KIE measured for the rate-determining rate constants in the similar Ni(+)(OC(CH(3))(2)) decomposition reaction. These reactions likely follow the same oxidative addition-reductive elimination mechanism. Thus, this unexpected change in the KIE magnitudes is not due to differences in the dissociative reaction coordinates. Rather, we propose that the unique dissociation dynamics of these two similar systems is due to differences in the low-lying electronic structure of each transition metal ion.

Gas-Phase Reactivity of Group 11 Dimethylmetallates with Allyl Iodide

Copper-mediated allylic substitution reactions are widely used in organic synthesis, whereas the analogous reactions for silver and gold are essentially unknown. To unravel why this is the case, the gas-phase reactions of allyl iodide with the coinage metal dimethylmetallates, [CH(3)MCH(3)](-) (M = Cu, Ag and Au), were examined under the near thermal conditions of an ion trap mass spectrometer and via electronic structure calculations. [CH(3)CuCH(3)](-) reacted with allyl iodide with a reaction efficiency of 6.6% of the collision rate to yield: I(-) (75%); the cross-coupling product, [CH(3)CuI](-) (24%); and the homo-coupling product, [C(3)H(5)CuI](-) (1%). [CH(3)AgCH(3)](-) and [CH(3)AuCH(3)](-) reacted substantially slower (reaction efficiencies of 0.028% and 0.072%). [CH(3)AgCH(3)](-) forms I(-) (19%) and [CH(3)AgI](-) (81%), while only I(-) is formed from [CH(3)AuCH(3)](-). Because the experiments do not detect the neutral product(s) formed, which might otherwise help identify the mechanisms of reaction, and to rationalize the observed ionic products and reactivity order, calculations at the B3LYP/def2-QZVP//B3LYP/SDD6-31+G(d) level were conducted on four different mechanisms: (i) S(N)2; (ii) S(N)2'; (iii) oxidative-addition/reductive elimination (OA/RE) via an M(III) η(3)-allyl intermediate; and (iv) OA/RE via an M(III) η(1)-allyl intermediate. For copper, mechanisms (iii) and (iv) are predicted to be competitive. Only the Cu(III) η(3)-allyl intermediate undergoes reductive elimination via two different transition states to yield either the cross-coupling or the homo-coupling products. Their relative barriers are consistent with homo-coupling being a minor pathway. For silver, the kinetically most probable pathway is the S(N)2 reaction, consistent with no homo-coupling product, [C(3)H(5)AgI](-), being observed. For gold, no C-C coupling reaction is kinetically viable. Instead, I(-) is predicted to be formed along with a stable Au(III) η(3)-allyl complex. These results clearly highlight the superiority of organocuprates in allylic substitution reactions.