Oxidation Tests Research Articles

Electrical resistance based residual strength prediction method for SiC/SiC mini-composites after stress-free oxidation

A stress-free oxidation model considering the microstructural characteristics of SiC/SiC mini-composites was proposed based on the electrical resistance change before and after oxidation. The relationship between the electrical resistance and the thickness of the internal fiber oxide layer was established. The stress-free oxidation tests were carried out at different temperatures for different oxidation times. The results of the oxide layer thickness calculated by the model agree well with those of the SEM observation. Based on the microstructure of tensile fracture after oxidation, the residual strength model of SiC/SiC mini-composites was proposed. The residual strength of the specimens after stress-free oxidation was calculated based on the oxide layer thickness obtained from the model. The error between the calculated and experimental results is within 14.48 %.

Comparison of oxidation resistance of high-entropy (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C/SiC composites prepared by different methods at 1300–1600 °C

Dense monolithic (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C/SiC (HEC/SiC) composites were prepared via single-source-precursor (SSP) and solid-state reaction (SSR) method, respectively. The SSP-method nanocomposite features HEC nanoparticles uniformly dispersed within β-SiC, while the SSR-method composite is a microcomposite containing micro-sized HEC and β-SiC particles. The oxidation tests at 1300–1600 ºC show that the HEC/SiC nanocomposites exhibit much better oxidation resistance than that of the HEC/SiC microcomposites. Firstly, the generated metal-containing complex oxides ((Zr,Hf)6Ta2O17, Ti(Ta,Nb)2O7, and Ta-doped rutile TiO2) become more facile for sintering due to the nano-scaled HEC phase. Secondly, the cracks resulting from the oxidation of HEC nanoparticles are fewer and smaller, decreasing the number of channels for oxygen to pass through and channels need to be healed by SiO2. Finally, the homogeneous distribution of the HEC nanoparticles within β-SiC ensures the homogeneity of the complex oxide layer, significantly reducing the cracks caused by volume expansion and preventing the oxide layer from peeling off.

Effect of Y on Oxidation Behavior of Directionally Solidified Ni-Based Single-Crystal Superalloy

The effect of yttrium (Y) addition on the oxidation behavior of a Ni-based directionally solidified single-crystal superalloy is investigated in this study. Isothermal oxidation tests for samples with different levels of Y addition are conducted at 1100 °C in air. The Y content of the samples is determined by the actual pickup amount obtained from an Inductively Coupled Plasma-Atomic Emission Spectrometry test. It is discovered that the addition of Y increases the oxide resistance by the scale of an adhesive double-layer oxide, which is composed of Al2O3 and spinel Ni(Cr,Al)2O4. With 70 ppm of Y addition, the oxidation mass gain decreases from 12.6 g/m2 for the alloy without Y addition to 5.3 g/m2, and the oxidation rate decreases significantly. In addition, the internal nitride disappears after Y doping because of an increase in oxidation scale adherence and a decrease in oxidation products. In this study, the alloy with 660 ppm Y addition demonstrates the best oxidation resistance.

The Influence of Oil and Thermal Aging on the Sealing Characteristics of NBR Seals.

Nitrile Butadiene Rubber (NBR) is widely used as a sealing material due to its excellent mechanical properties and good oil resistance. However, when using NBR material, the seal structure is unable to avoid the negative effects of rubber aging. Hence, the influence of oil and thermal aging on the characteristics of NBR seals was studied by coupling the mechanical behavioral changes with the tribological behavioral changes of NBR in oil and the thermal environment. For this paper, aging testing and compression testing of NBR were carried out. Additionally, friction testing between friction pairs under different aging times was carried out. The surface morphology of the NBR working surface under different aging conditions was also observed. Finally, coefficients of different test conditions were introduced into the finite element model of NBR seals. It can be seen from the results that the elastic modulus increased with the increase in aging time in the thermal oxidative aging testing. The elastic modulus after 7 days of thermal oxidative aging increased by 135.45% compared to the unaged case, and the elastic modulus after 7 days of oil aging increased by 15.03% compared to the unaged case. The compression set rate of NBR increased significantly with the increase in aging time and temperature. The coefficient of friction (COF) between friction pairs increased first and then decreased with the increase in aging time. The maximum contact pressure decreased by 2.43% between the shaft and sealing ring and decreased by 4.01% between the O-ring and groove. The proportion of the effective sealing area decreased by 3.05% between the shaft and sealing ring and decreased by 6.11% between the O-ring and groove. Furthermore, the sealing characteristics between the O-ring and groove were better than those between the shaft and sealing ring.

Exploring the Therapeutic Potential of Mesenchymal Stem Cells-derived conditioned medium: An In-depth Analysis of Pain Alleviation, Spinal CCL2 Levels, and Oxidative Stress.

Neuropathic pain, a debilitating condition, remains a significant challenge due to the lack of effective therapeutic solutions. This study aimed to evaluate the potential of mesenchymal stromal cell (MSC)-derived conditioned medium in alleviating neuropathic pain induced by sciatic nerve compression injury in adult male rats. Forty Wistar rats were randomly assigned to four groups: control, nerve injury, nerve injury with intra-neural injection of conditioned medium, and nerve injury with intra-neural injection of culture medium. Following sciatic nerve compression, the respective groups received either 10 µl of conditioned medium from amniotic fluid-derived stem cells or an equal volume of control culture medium. Behavioral tests for cold allodynia, mechanical allodynia, and thermal hyperalgesia were conducted, and the spinal cord was analyzed using Western Blot and oxidative stress assays. The behavioral experiments showed a decrease in mechanical hyperalgesia and cold allodynia in the group receiving conditioned medium compared to the injury group and the control medium group. Western blot data revealed a decrease in the expression of the CCL2 protein and an increase in GAD65. Oxidative stress tests also showed increased levels of SOD and glutathione in conditioned media-treated animals compared to animals with nerve injury. The findings suggest that conditioned medium derived from amniotic fluid-derived stem cells can effectively reduce neuropathic pain, potentially through the provision of supportive factors that mitigate oxidative stress and inflammation in the spinal cord.

Developing advanced CrSi coatings for combatting surface degradation of N-type (Zr,Ti)Ni(Sn,Sb) and P-type (Zr,Ti)Co(Sn,Sb) half Heusler thermoelectric materials

In this study, advanced oxidation-protective CrSi coatings were developed and deposited on N-type (Zr,Ti)Ni(Sn,Sb) and P-type (Zr,Ti)Co(Sn,Sb) thermoelectric (TE) materials using an environmentally friendly closed field unbalanced magnetron sputtering PVD system. The oxidation behaviour of the CrSi-coated and uncoated samples was evaluated through static oxidation tests at 500 °C and 600 °C for 10h and 50 h, respectively. In addition, the samples were exposed to cyclic oxidation tests between 25 °C and 500 °C for 10, 30 and 50 cycles, with each cycle consisting of 1h of oxidation at 500 °C, to examine the coating ability to withstand thermal shock, which is involved in the service of TE devices. The surface morphology, cross-section layer structure, elemental distribution and phase constitution were analysed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray diffraction (XRD). The mass gain after the oxidation tests was measured and calculated for each sample to study the oxidation kinetics. The uncoated samples exhibited a considerable amount of oxidation, leading to change in the surface morphologies, and the formation of alternated layers including oxide products (Zr(Ti)O2, SnO2) and Ni3Sn4 compound for the N-type and (Zr(Ti)O2, SnO2, Sb2O4) and CoSb compound for the P-type material, after static and cyclic oxidation tests. The experimental work in this study has, for the first time, demonstrated that the CrSi coatings developed with very high thermal stability and oxidation resistance can effectively protect both the N-type and P-type materials from oxidation and sublimation even during cyclic oxidation tests. The strong affinity of Cr and Si to oxygen can trap oxygen, retard its inward diffusion and thus protect the TE material substrate from oxidation. This finding could pave the way towards the further development of long-life high-performance TE generators and devices, thus contributing to the net zero target.

Oxidation behavior of SiC‐AlN ceramics exposed to dry oxygen and water oxygen environments at 1100–1300°C

AbstractThe corrosion of SiCf/SiC composites in gas environment threatens their long‐term service in aeroengines as hot‐end structure components. Addition of corrosion‐resistant phases into SiC matrix is a potential strategy to improve the service performance of SiCf/SiC materials. Here, AlN added SiC ceramics were prepared by reactive melt infiltration, and the effect of AlN phase on the oxidation resistance of the ceramics was emphasized. The oxidation tests were performed in dry oxygen and water oxygen atmospheres at 1100°C–1300°C, respectively. The oxidation mechanism was discussed based on the microstructure evolution of the oxide layer. The results show that the oxide layer is composed of aluminum silicate glass and Al2O3 flakes dispersedly distributed in the glass phase. As the temperature rises, the oxide layer gradually grows and thickens. Finally, a smooth and dense protective layer could be formed on the surface of ceramics to resist oxidation. This study can provide a profound insight to construct SiCf/SiC composites with excellent oxidation resistance.

Impact of Sweet Orange Peel Essential Oil on the Nutrient and Oxidative Stability of Aquafeed During the Storage Condition

The main goal of this study was to assess the qualitative composition of essential oil (P), a natural extract produced from wasted orange peels in the citrus processing sector. Additionally, the study aimed to investigate the alterations in fish feeds when this essential oil is incorporated and stored. The essential oil was extracted from the orange peels provided for the study using the hydrodistillation method and the Clevenger apparatus. The study determined the volatile components of the oil with 100% accuracy. The primary constituent was identified as D-limonene, comprising 59.27% of the total composition. Subsequently, experimental feed groups were established by including the essential oil in the feed rations at ratios of ‰0 (P0), ‰0.5 (P5), ‰1 (P10), and ‰3 (P30). Under storage conditions, the feeds were stored in feed sacks for 60 days. Periodic samples were collected during storage and subjected to nutritional, microbiological, structural, and oxidation tests. The results of the study show that P had no protective effect in fish diets against the growth of yeasts, molds, and other mesophilic aerobic bacteria (p > 0.05). It was shown that the nutritional values varied over time during storage. However, this variation was not substantially correlated with the amount of P in the diets (p > 0.05). There was no discernible impact of the addition of P on the structural characteristics of the feed grains. Nevertheless, the inclusion of P substantially impeded the process of lipid oxidation in the diet (p<0.05). After the two-month storage period, it was shown that adding at least 1 ‰ of P to the fish meals prevented the peroxide generated from oxidation in the feed from exceeding acceptable levels.

Effect of cyclic oxidation temperature on compressive strength of Cu-based brake pad for high-speed train

The cyclic oxidation tests of Cu-based brake pads at temperatures of 25, 300, 400, 500, 550, 600, 650 and 700 °C were conducted to simulate the oxidation of the friction surface under different braking speeds. Furthermore, the effect of cyclic oxidation temperature on the compressive strength was investigated. The results show that the cyclic oxidation process of Cu-based brake pads can be divided into three stages: mild oxidation (≤400 °C), moderate oxidation (500–600 °C) and severe oxidation (≥650 °C). Mild oxidation results in the formation of spherical Cu2O particles. The surface is covered by Cu2O and Fe2O3 nanosheets for moderate oxidation. Severe oxidation is characterized by a continuous thick CuO film, Fe2O3 nanosheets, and eroded graphite particles. The compressive strength and toughness of Cu-based brake pads show a declining trend as the cyclic oxidation temperature rises. The compressive strength of the Cu-based brake pad after oxidized at 700 °C, recorded at 30.56 MPa, is considerably lower than that of the original samples, which was 132.2 MPa. This reduction in compressive strength is attributed to the embrittlement of the metallic matrix and the formation of pores from graphite oxidation.

Optimizing additive Y2O3 concentration for improving corrosion resistance of ceramic coatings formed by plasma electrolytic oxidation on Zr-4 alloy

Abstract The corrosion resistance of ceramic coatings developed by plasma electrolytic oxidation (PEO) can be improved by embedding particles. Optimizing the concentration of particles in the electrolyte is essential to obtain the best coating performance. This work aims to optimize the concentration of Y2O3 embedded in the PEO coatings on Zr-4 alloy to obtain the best corrosion resistance. Nanoparticles Y2O3 was suspended in the PEO electrolyte at a concentration of 2, 3 and 4 g l−1. The particles were successfully embedded in the PEO coating composed of ZrO2–SiO2. The electrochemical test in an aqueous solution and oxidation test at 600 °C revealed a consistent result that the best corrosion resistance was obtained in the coating formed in the 3 g l−1 Y2O3-containing electrolyte. At the corresponding optimum concentration, the coating contained high SiO2 and tetragonal (t) ZrO2 phase, which potentially formed a stable solid solution ZrO2–SiO2. The improved coating stability enhanced the corrosion resistance during both aqueous solution and high temperature exposure.

Characterization of Seven Species of Camellia Oil: Oil Content, Volatile Compounds, and Oxidative Stability.

In this study, we conducted tests on the seeds from four Taiwanese native Camellia species (C. japonica, C. furfuracea, C. laufoshanensis, and C. formosensis) and three commercialized species (C. oleifera, C. brevistyla, and C. sinensis) for comparison. We examined various aspects of these species, such as seed oil content, suitability for mechanical pressing, volatile components (edible flavor), and oil stability (suitability for cooking), to assess the feasibility of using these four native Taiwanese Camellia seeds as sources of edible oil. The results from solvent extraction tests and mechanical pressing experiments confirm that the seeds from C. furfuracea, C. japonica, and C. laufoshanensis have high oil contents, and their oils are suitable for extraction via the popular mechanical pressing method, with oil yields comparable to or higher than those of the commercialized Camellia species. The volatile components of the oils were collected using MonoTrap adsorbents and analyzed with a thermal desorption system coupled with gas chromatography-mass spectrometry (ATD-GC/MS), primarily consisting of alcohols, ketones, and aldehydes. The results of oxidative stability tests reveal that the seed oils from C. japonica, C. furfuracea, and C. laufoshanensis are higher than or equally stable to those from the commercialized Camellia species. After six months of storage, the stability of these three Camellia seed oils remained relatively high, demonstrating that the seed oils from C. japonica, C. furfuracea, and C. laufoshanensis can withstand high temperatures and can be easily preserved for future applications.

Growth of α-Al2O3 layer involving abnormal oxides in FeCrAl alloy tube fabricated by WEDM process and electrical insulating performance in fusion reactor blanket

The tubular specimens of FeCrAl alloy APMT (Fe-22Cr-5Al-3Mo) were fabricated by a wire electrical discharge machining (WEDM) process. The oxidation characteristics of the machined surface were investigated by means of the oxidation tests performed in air atmosphere at the temperatures of 1273 K and 1373 K up to 100 h. The abnormal oxides such as CuAl2O4 and ZnAl2O4 were grew on the recast layer which was locally remained on the machined surface even after the mechanical polishing procedure. The α-Al2O3 layer involving the abnormal oxides was formed on the machined surface in the oxidation treatment at 1273 K for 10 h. The apparent electrical conductivity of the layer involving the abnormal oxides was larger than that without the abnormal oxides. Thick Al-rich oxide layer was formed under the abnormal oxides when the oxidation treatment was performed at 1373 K. The apparent electrical conductivity of the oxide layer became lower due to the presence of the thick Al-rich oxide. This oxide layer formed at 1373 K could function as an electrical insulating layer to reduce the magnetohydrodynamic pressure drop in liquid breeder blanket systems of magnetic confinement fusion reactors.

Assessing the influence of welding-induced mechanics on oxidation and stress corrosion cracking in an Alloy 600-Alloy 152 M weldment under simulated PWR primary water

The impact of welding-induced mechanics on the oxidation and stress corrosion cracking (SCC) behavior of Alloy 600 in a pressurized water reactor (PWR) primary water was investigated using an Alloy 600-Alloy 152 M weldment. The microstructural analysis found a 0.05 mm-wide composition transition zone from welding. The Alloy 600 heat-affected zone (HAZ) grain size matches the Alloy 600 base (600B). Deformation hardening initially decreases and stabilizes from the fusion boundary (FB) to the 600B Comparing the microstructural characteristics of the specimen from the HAZ at about 0.5 mm from the FB with specimen 600B shows identical composition, but the former exhibits higher Vickers hardness (HV), kernel average misorientation (KAM), dislocation density, and residual stresses. Results from both short- and long-term oxidation tests indicate that the specimen from the HAZ exhibits a greater thickness of the inner oxide film, a higher number of local oxidation sites, and an increased maximum depth of intergranular (IG) oxidation compared to the 600B specimen. Multiple sets of SCC test results demonstrate that the crack growth rate (CGR) in the specimens from the HAZ is higher than that in the base, with the former showing longer IG cracks and a greater proportion of IG cracking.

Composition optimization of (Hf, Ta, Zr, Cr)C high‐entropy carbides for good oxidation resistance

AbstractOxidation resistance is crucial to the potential applications of high‐entropy carbides (HECs) at elevated temperatures. Here, we realize the exploration of (Hf, Ta, Zr, Cr)C high‐entropy carbides (HEC‐TM, TM = Hf, Zr, Ta, and Cr) with good oxidation resistance by optimizing their compositions. To be specific, 21 kinds of HEC‐xTM (x = 0–25 mol%) samples are fabricated by a high‐throughput ultrafast high‐temperature sintering technique, followed by oxidation testing at 1673 K for 30 min. Among all the HEC samples, the as‐fabricated HEC‐0Zr samples are proved to possess the best oxidation resistance with an oxidation depth of only 53 µm. Further study on isothermal oxidation kinetics demonstrates that the as‐fabricated HEC‐0Zr samples follow a linear oxidation law. The good oxidation resistance of the as‐fabricated HEC‐0Zr samples is believed to result from the (Ta, Me)2O5 phase with a low melting point, which can promote the densification of the oxide layer. This research opens up a new way for efficiently discovering new HECs for extreme applications.

Sustainable aviation fuel: Impact of alkene concentration on jet fuel thermal oxidative test (JFTOT)

AbstractOf the processes that are approved to produce synthetic kerosene for use in jet fuel, about half produce olefinic kerosene that is hydrotreated. The alkene concentration in synthetic kerosene is indirectly regulated through the thermal oxidative stability specification. Perceptions about the deleterious influence of alkenes on thermal oxidative stability suggest that olefinic kerosene must be deeply hydrogenated. The extent of olefin saturation required has economic implications. To evaluate what an acceptable alkene concentration in synthetic kerosene is, the impact of alkene concentration on the outcome of the jet fuel thermal oxidative stability test (JFTOT) performed at 325°C in accordance with the ASTM D3241 standard test method was experimentally evaluated. Model synthetic kerosene mixtures to which different concentrations of alkenes (1‐decene, α‐methylstyrene, indene) were added, as well as control samples were studied. In the concentration range investigated, up to 10 wt% 1‐decene, 5 wt% α‐methylstyrene, and 2 wt% indene did not lead to increased fouling in the JFTOT. Fouling passed through a minimum value with increasing alkene concentration and alkene concentration on its own was a poor predictor of thermal oxidative stability. Analysis of the kerosene collected after passing through the JFTOT found measurable changes in density and refractive index. Dissolved oxygen reacting during thermal oxidative stability testing was accounted for mostly in oxygen‐containing products in the kerosene boiling range, which indicated that the heavier products were mainly hydrocarbon in nature. In addition to initiation by autoxidation, the investigation also pointed to the existence of a second thermally initiated fouling pathway that does not require the presence of oxygen.

Evaluation of the Protective Effects of Vitamins E and D on Oxidative Stress and Inflammation Caused by Tamoxifen in the Renal Tissue of Female Wistar Rats

Background: Tamoxifen is an effective drug for breast cancer treatment and its side effects are the production of reactive oxygen species and kidney damage. As antioxidants, vitamins E and D may help decrease kidney dysfunction. Objectives: In the present study, the protective effects of vitamins E and D on renal toxicity caused by tamoxifen in female Wistar rats were investigated. Materials and Methods: Twenty-five adult female rats weighing 180-200 were randomly divided into five groups with 5 rats. Group C, T, TE, TD, and TED were treated with olive oil, tamoxifen, tamoxifen + vitamin E, tamoxifen +vitamin D, and tamoxifen + both vitamins for four weeks. ELISA Kits measured the oxidant and antioxidant tests and TNF-α in kidney tissue. The spectrophotometric method measured urea, uric acid, and creatinine in serum and urine. Results: Tamoxifen significantly decreased the weight of rats, GPx, CAT, SOD levels and increased TNF-α, urinary creatinine level and, serum uric acid, urea levels (P < 0.05). But, treatment with vitamin D and simultaneous administration of vitamins led to a significant decrease in the level of (TNF-α) compared to the tamoxifen group (p < 0.01). Also, the histopathology results showed that the simultaneous administration of vitamins has significantly resolved the damage caused by the use of tamoxifen. Conclusion: The present study's findings showed that using vitamins E and D prevents kidney damage through antioxidant and anti-inflammatory effects. In addition, using vitamins E and D probably showed stronger synergistic effects against kidney damage.

Corrosive behavior of copper canisters under air and aerobic groundwater at early stages of deep geological disposal

Copper oxidation at low temperatures below 140 °C and its effects on corrosive behavior in aerobic groundwater are investigated to estimate the intactness of canisters at early stages of disposal. The Cu coupon surface is covered by fine particles that form thin oxide layers after 30 d of oxidation; a thin Cu2O layer of thickness <100 nm is formed after oxidation at 40 °C; after oxidation at 140 °C, the Cu2O surface changes to a CuO layer of thickness <500 nm. The thickness of the Cu surface oxidized at 90 °C is between those of the surfaces oxidized at 40 and 140 °C. All Cu coupons exhibit similar current densities ranging from 0.77 to 1.87 μA cm−2, although the corrosion potential of the Cu coupon layered with Cu2O is higher than that of the others. Long-term oxidation tests for 406 d reveal no significant changes in the Cu surface at temperatures below 90 °C, indicating no significant change in the electrochemical behavior. The results of this study suggest that the storage of canisters at temperatures below 90 °C has no significant effect on the degradation of canister performance in long-term disposal.

Effect of reactive elements in MCrAlX bond coat for durability improvement of thermal barrier coatings

The effects of reactive elements (RE) in MCrAlX alloy (M: Metals, X: RE) as the bond coat for thermal barrier coatings durability were investigated by both experimental evaluation and density functional theory (DFT) calculations. Cyclic oxidation tests showed that the lifetime of the sample with Y, Hf, and Si as RE displayed approximately twice of the sample with Y only. Furthermore, the interface energies between oxide (α-Al2O3) and bond coat with various RE (Si, Sc, Ti, Y, Zr, Hf, La, and Ce) were calculated by DFT. DFT results indicate that Hf and Si doping effectively reduce the interface energy.

Macroscopic and microscopic element distribution in transition zones of GTAW Alloy 52M weld joint and its PWSCC growth behaviour

The microstructure and element distribution in the transition zone (TZ) of Alloy 52M buttering (52Mb) layer near the fusion boundary to the SA508III low alloy steel in a dissimilar metal weld joint with post-weld heat treatment (PWHT) is characterized. Two macroscopic TZs in the heat-affected zone have lower Cr and Ni contents than the bulk Alloy 52Mb. The first TZ near the fusion boundary has the lowest Cr and Ni compositions, accompanying the highest Fe content. Cr depletion and Ni enrichment along with slight Fe enrichment at the dendrite boundaries in the TZs, are more significant than those in the bulk Alloy 52Mb. The number and the maximum depth of local oxidation penetrations at the alloy-inner oxide interface based on the oxidation tests, the number and the maximum length of locally interdendritic cracks, as well as the average crack growth rate (CGR) in terms of the stress corrosion cracking (SCC) band based on the SCC tests in the first TZ are higher than those in the second TZ. The average SCC CGR is enhanced by macroscopic element dilution, while local oxidation penetration, as well as locally interdendritic SCC, are thought to be enhanced by both the macroscopic dilution of Cr in the TZs and the microscopic Cr depletion at dendrite boundaries.

Investigation into the Reduction of Palm Oil in Foods by Blended Vegetable Oils through Response Surface Methodology and Oxidative Stability Tests.

Recently, there has been a significant transition in the dietary preferences of consumers toward foods containing health-promoting compounds. In addition, as people's environmental awareness increases, they are increasingly looking for sustainable solutions. Palm oil, an oil used extensively by the food industry, does not fit these criteria. This study investigated the development of a complex oil blend consisting of commonly used vegetable oils such as corn, rapeseed, sunflower, and palm oil. The aim was to find the optimal blended oil and compare this combination with palm oil in terms of its oxidative stability, antioxidant capacity, and the composition of bioactive compounds (i.e., fatty acids, tocopherols, and carotenoids). Palm oil was found to have greater oxidative stability as a result of its increased concentration of saturated fatty acids. The optimal blended oil, which consisted of corn and rapeseed oil at a ratio of 4:3 w/w, inhibited the superior antioxidant activity, showing a ~33% increase in DPPH• inhibition activity. ATR-FTIR spectra further verified the existence of a significant quantity of saturated fatty acids in palm oil and unsaturated fatty acids in the blended oil. Finally, several correlation analyses revealed interesting connections between oil samples and investigated parameters. This work has the potential to establish a basis for the mass production of oil blends that possess high concentrations of antioxidant compounds and reduce the use of palm oil.