Carbon Monoxide Research Articles

Effective Air Pollution Monitoring System for Eco Balance

Air pollution in urban areas is increasingly driven by vehicle emissions, which release harmful gases include such things as carbon monoxide (CO), nitrogen oxides (NOx), hydrocarbons (HC), and particulate matter (PM). These pollutants pose significant risks to both environmental quality and public health, highlighting the urgent need for effective monitoring and control systems. This project presents the development of an automated Effective Air Pollution Monitoring System for Eco Balance, designed to detect exhaust gas levels in real-time as vehicles pass designated points. The system employs advanced sensors to monitor pollutant concentrations and utilizes a camera- based recognition system to capture the number plates of vehicles that exceed permissible emission levels. The collected data, including pollution metrics and vehicle details, is transmitted to the Regional Transport Office (RTO) for necessary enforcement actions. By promoting compliance with emission standards, this automated system aims to significantly reduce vehicle-related air pollution, fostering a cleaner and healthier urban environment

Disilicon‐Mediated Carbon Monoxide Activation: From a 1,2,3‐Trisila‐ to 1,3‐Disilacyclopentadienes with Hypercoordinate λ4Si‐λ3C Double Bonds

AbstractThe facile reaction of the SiPh2‐bridged bis‐silylene (LSi:)2SiPh2 (L=PhC(NBut)2) with diphenylacetylene affords the unprecedented 1,2,3‐trisilacyclopentadiene (LSi)2(PhC)2SiPh2 1 with a hypercoordinate λ4Si−λ3Si double bond. Compound 1 is very oxophilic and consumes three molar equivalents of inert N2O to form the bicyclic oxygenation product 2 through O‐atom insertion in the Si=Si and Si−Si bonds. Strikingly, 1 can completely split the C≡O bonds of carbon monoxide under ambient conditions (1 atm, room temperature), yielding the 1,3‐disilacyclopentadiene 3, representing the first hypercoordinate example of a cyclosilene with a λ4Si‐λ3C double bond. Likewise, reaction of Xyl‐NC (Xyl=2,6‐dimethylphenyl), an isocyanide isoelectronic with CO, with 1 furnishes the related 1,3‐disilacyclopentadiene 4 but with an amidinato silylene pendent attached to the Si=C carbon ring atom.

Cost-utility analysis of provision of e-cigarette starter kits for smoking cessation in emergency departments: An economic evaluation of a randomized controlled trial.

To assess the cost-effectiveness of the Cessation of Smoking Trial in Emergency Department (COSTED) intervention compared with signposting to local stop smoking service (SSS) from the National Health Service (NHS) and personal social services (PSS) perspective. This was a two-group, multi-centre, pragmatic, individually randomized controlled trial set in six Emergency Departments (EDs) in urban and rural areas in the United Kingdom. Adult (≥ 18 years) daily smokers (at least one cigarette or equivalent per day) but not daily e-cigarette users, with carbon monoxide reading ≥8parts per million, attending the ED (n= 972) were included. The intervention consisted of provision of an e-cigarette starter kit plus brief smoking cessation advice and referral to a local SSS. Control was an information card on how to access local SSS. Intervention costs included costs of training and delivery. Control costs included costs of printing information cards. Costs of smoking cessation and health-care services were estimated based on quantities reported by participants and unit costs extracted from secondary sources. The effects were measured by quality-adjusted life years (QALYs) derived from EQ-5D-5L. Other outcomes were smoking cessation measures. The primary outcome was incremental cost-effectiveness ratio (ICER), which was calculated by dividing the difference in costs by the difference in QALYs between groups. The mean intervention costs were £48 [standard error (SE) = £0] per participant and the mean control costs were £0.2 (SE = £0) per participant. Using regression estimates, total costs were £31 [95% confidence interval (CI) = -£341 to £283] higher and 6-month QALYs were 0.004 (95% CI = -0.004 to 0.014) higher in the intervention group than in the control group. The ICER was calculated at £7750 (probability of cost-effective at range £20 000-30 000: 72.2-76.5%). The UK Cessation of Smoking Trial in Emergency Department (COSTED) intervention (provision of an e-cigarette starter kit plus brief smoking cessation advice) was cost-effective compared with signposting to local stop smoking services under the current recommendations of the maximum acceptable thresholds.

Disilicon-Mediated Carbon Monoxide Activation: From a 1,2,3-Trisila- to 1,3-Disilacyclopentadienes with Hypercoordinate λ4Si-λ3C Double Bonds.

The facile reaction of the SiPh2-bridged bis-silylene (LSi:)2SiPh2 (L=PhC(NBut)2) with diphenylacetylene affords the unprecedented 1,2,3-trisilacyclopentadiene (LSi)2(PhC)2SiPh2 1 with a hypercoordinate λ4Si-λ3Si double bond. Compound 1 is very oxophilic and consumes three molar equivalents of inert N2O to form the bicyclic oxygenation product 2 through O-atom insertion in the Si=Si and Si-Si bonds. Strikingly, 1 can completely split the C≡O bonds of carbon monoxide under ambient conditions (1 atm, room temperature), yielding the 1,3-disilacyclopentadiene 3, representing the first hypercoordinate example of a cyclosilene with a λ4Si-λ3C double bond. Likewise, reaction of Xyl-NC (Xyl=2,6-dimethylphenyl), an isocyanide isoelectronic with CO, with 1 furnishes the related 1,3-disilacyclopentadiene 4 but with an amidinato silylene pendent attached to the Si=C carbon ring atom.

Ultratrace CO/SF6 Detection System Based on Differential Fourier Transform Infrared Spectroscopy Combined with the Weighted Sine Spectral Reconstruction Convolutional Neural Network (WSSR-CNN) Model.

Carbon monoxide (CO), as an indicator gas for fault diagnosis of gas-insulated switchgear, has the strongest absorption coefficient in the mid-infrared region, making Fourier transform infrared (FTIR) spectroscopy an ideal method for its concentration detection. However, there is extremely abundant absorption of SF6 in this region, resulting in a great challenge for CO/SF6 detection. To address this challenge, we report a high sensitivity online detection system for ultratrace levels of CO, which combines differential Fourier transform infrared (DFTIR) spectroscopy with a weighted sine spectral reconstruction convolutional neural network (WSSR-CNN). The differential technique is first introduced into FTIR for baseline correction of CO absorption signals. The novel WSSR method achieves feature extraction and denoising of weak spectral signals in strong interference by discretizing interfering signals and enhancing target signals. On this basis, the detection of CO concentration is realized using the CNN model. Finally, WSSR-CNN is compared with four other methods. Results showed that WSSR-CNN outperforms all four models with evaluation index R2 reaching 0.99982 and 0.99999 in the range of low concentration (0.096-0.986 ppm) and high concentration (1.984-52.193 ppm) and mean absolute percentage error of 0.97% and 0.22%, respectively. The lowest detection limit of the system at 1σ is 13 ppb, which is the best result reported so far for detecting CO/SF6 concentration based on FTIR.

Selective Reduction of Iron in High-Phosphorus Oolitic Ore from the Lisakovsk Deposit

Reduction of iron in high-phosphorus oolitic ore from the Lisakovsk deposit using solid carbon, carbon monoxide, and hydrogen. An X-ray phase analysis was used to determine the phase composition of the samples after reduction roasting. When reduced with carbon monoxide or hydrogen, α-iron appears in the samples, while phosphorus remains in the form of iron, calcium, and aluminum phosphates. After roasting with solid carbon, phosphorus is reduced from iron and calcium phosphates and migrates into the metal but remains in aluminum phosphate. A micro X-ray spectral analysis showed that at a temperature of 1000 °C and a holding time of 5 h, during reduction with solid carbon, the phosphorus content in the metallic phase reaches up to 7.1 at. %. When reduced with carbon monoxide under the same conditions, the metallic phase contains only iron, and phosphorus is found only in the oxide phase. When reduced with hydrogen at 800 °C, phosphorus is almost absent in the metallic phase, but at 900 °C, phosphorus is reduced and its content in the metallic phase reaches 2.1 at. %.

Investigation into the impact of acetylene on performance and emission characteristics of a compression ignition engine using a blended biodiesel of ethanol and tamanu oil.

Due to the significant increase in transportation, traditional fossil fuels utilised in internal combustion engines will only be accessible for a limited duration. Additionally, the harmful pollutants produced by these fuels, including CO, NOx, unburned hydrocarbons, smoke, and a small amount of particulate matter, have a severe negative impact on the environment. Although biodiesel proves efficient without necessitating engine modifications, its performance is hindered by its higher viscosity. Consequently, this research aims to enhance performance by introducing acetylene alongside tamanu methyl ester (biodiesel); however, this approach results in elevated NOx levels. To mitigate NOx emissions, a combination of ethanol and biodiesel is employed. This study investigates the performance and emission attributes of Acetylene + TME90E10 as the fuel. The combustion pressure and heat release rate of TME90E10 with 6 lpm, improved by 5.41% and 9.1% than diesel. When compared to regular diesel fuel, the introduction of 6l per minute of acetylene with TME90E10 yields a substantial 24.4% decrease in hydrocarbon (HC) emissions. Furthermore, employing TME90E10 at the same acetylene flow rate demonstrates the lowest carbon monoxide (CO) emissions, registering at 0.07%, in contrast to the 0.13% emissions observed throughout the exhaust cycle when using pure diesel fuel.

Development of a top-lit-up-draft biomass gasifier as a sustainable heat source for effective drying of plantain slices in a cabinet dryer

This paper explored the development of a top-lit-up-draft biomass gasifier as a sustainable heat energy alternative to the traditional sun drying and the costly, unreliable heat energy sources such as grid-electricity and petrochemical fuels commonly used for cabinet dryers, especially in developing countries like Nigeria. The gasifier utilized the principle of top-lit-updraft biomass gasification system to thermochemically converts agricultural residues into clean heat energy. The designed gasifier has reactor diameter and height of 28cm and 90cm, fuel consumption rate of 55kg/hr, gasification airflow rate of 82.1m3/hr, DC fan motor of 15W, equipped with 30Ah battery power source, and capable of supplying heat energy of 260.16MJ/h. Performance testing using input variables of fuel loading (10kg-20kg), fan speed (4000rpm-6000rpm), and fuel type (palm-kernel shell, coconut shell, coconut husk, and wood shavings) assessed the gasifier responses such as fuel gasification time, flame temperature, thermal and combustion efficiencies, and carbon monoxide (CO) emission of the flame. Results revealed maximum thermal efficiency, peak flame temperature and longest gasification time of 86.02%, 8750C, and 130min respectively, when operated with palm-kernel shell at maximum fan speed and fuel loading, which emitted average CO of 1ppm lower than the least international air pollutant threshold of 9ppm. Highest combustion efficiency of 99.9% was attained using wood shavings at maximum fan speed and fuel loading. The results highlighted the potential of the gasifier as an effective heat source for drying applications, particularly for drying plantain slices in a cabinet dryer.

Association between temperature and air pollutants with atrial fibrillation presentations to emergency departments.

Understanding the impact of environmental exposures on disease incidence is important for environmental guidelines, health services management, and advising patients. We aimed to assess the relationship between daily mean temperature and common pollutants with atrial fibrillation (AF) presentations to emergency departments (EDs). The study included consecutive adult patients presenting with AF to EDs from 1/1/2014 to 31/12/2020 with linkage to hospital and emergency discharge diagnosis data. A time series quasi-Poisson regression with a distributed lag nonlinear model was fitted to assess the association between AF with mean air temperature and five common pollutants, overall and according to sex and region, with adjustment for season, day of the week, long-term trend, and co-pollutants. In 82 575 AF presentations to EDs during the study period, mean (standard deviations [SD]) (SD) age was 69.6 (SD 14.7) years and 50.7% were female. AF presentations were associated with elevated levels of Particulate Matter (PM) 2.5 (≥57.7 µg/m3) and nitrous dioxide (NO2) (≥16.5 parts per billion), but not mean air temperature or other pollutants (carbon monoxide, sulphur dioxide, or ozone). The attributable fraction of AF presentations relating to above optimal NO2 and PM 2.5 levels was 7.24% and 3.81% resulting in 854 and 450 annual excess AF presentations, respectively. High levels of NO2 and PM 2.5 are associated with increased risk of AF presentations to EDs. These findings have important implications for environmental policies and advice to patients susceptible to AF presentations to EDs, especially in regions with higher baseline levels of PM 2.5 or NO2.

Cleavage of Carbodicarbenes with N2O for Accessing Stable Diazoalkenes: Two-Fold Ligand Exchange at a C(0)-Atom.

The cleavage of carbophosphinocarbenes and carbodicarbenes with nitrous oxide (N2O) leads to the formation of room-temperature stable diazoalkenes. The utility of Ph3P/N2 and NHC/N2 ligand exchange reactions were demonstrated by accessing novel benzimidazole- and benzothiazole derived diazoalkenes, which are not accessible by the current state-of-the-art methods. The stable diazoalkenes subsequently allow further ligand exchange reactions at C(0) with carbon monoxide, isocyanide, or a diamidocarbene (DAC). Overall, the combination of hitherto unknown NHC/N2 and N2/L (L = DAC, CO, R-NC) ligand exchange reactions at a C(0) center allow the selective functionalization of the carbodicarbene ligand structure which represents a new methodology to rapidly assemble novel carbodicarbenes or cumulenic compounds.

Effect of the Reactor Material on the Reforming of Primary Syngas

Syngas, mostly hydrogen and carbon monoxide, has traditionally been produced from coal and natural gas, with biomass gasification later emerging as a renewable process. It is widely used in fuel synthesis through the Fischer–Tropsch (FT) process, where the H2/CO ratio is crucial in determining product efficiency and quality. In this sense, this study aimed to reform an emulated syngas resulting from the supercritical water gasification of biomass, tailoring it to meet the H2/CO ratio required for FT synthesis. Conditions resembling dry reforming were applied, using temperatures from 600 to 950 °C and steel wool as a catalyst. Additionally, the effects of Inconel and stainless steel as reactor materials on syngas reforming were investigated. When Inconel was used, H2/CO ratios ranged between 1.04 and 1.84 with steel wool and 1.28 and 1.67 without. When comparing reactions without steel wool performed either in the Inconel or the stainless steel reactors, those using Inconel consistently outperformed the stainless steel ones, achieving CH4 and CO2 conversions up to 95% and 76%, respectively, versus 0% and 39% with stainless steel. It was concluded that the Inconel reactor exhibited catalytic properties due to its high nickel content and specific oxides.

Dual-Mode Reactive Oxygen Species-Stimulated Carbon Monoxide Release for Synergistic Photodynamic and Gas Tumor Therapy.

Controllable carbon monoxide (CO) release simulated by light-generated reactive oxygen species (ROS) represents a promising approach for cancer therapy but is hampered by low CO release rate and low ROS generation of conventional photosensitizers in hypoxia tumor microenvironments. In this study, we developed a highly efficient nanoplatform (TPyNO2-FeCO NPs) through co-encapsulating organic AIE photosensitizers (PSs) and CO prodrug (Fe3(CO)12), which are capable of light-triggered robust ROS generation and CO release for synergistic photodynamic therapy (PDT) and CO gas therapy. The success of this nanoplatform leverages the design of a PS, TPyNO2, with exceptional type I and type II ROS generation capabilities, achieved through the introduction of the α-photoinduced electron transfer (α-PET) process. With the incorporation of a 4-nitrobenzyl unit as a typical PET donor, the intramolecular α-PET process not only suppresses the radiative decay to redirect the excited-state energy to intersystem crossing for more triplet-state formation but also promotes electron separation and transfer processes for radical-type ROS generation. The resultant TPyNO2 demonstrates superior singlet oxygen, superoxide anion, and hydroxyl radial generation capabilities in the aggregate state. Upon light irradiation, TPyNO2-FeCO NPs release CO via the type I and type II dual-mode ROS-mediated processes in a controlled and targeted manner, overcoming the limitations of conventional CO release systems. TPyNO2-FeCO NPs also demonstrate a self-accelerating ROS-CO-ROS loop as the released CO induces intracellular oxidative stress, depolarizes mitochondria membrane potentials, and inhibits ATP production, leading to further intracellular ROS generation. Both in vitro and in vivo experiments validated the excellent antitumor performance of the combined PDT and CO gas therapy. This study provides valuable insights into the development of advanced PSs and establishes TPyNO2-FeCO NPs as promising nanoplatforms for safe and effective antitumor applications.

Diagnosis of Respiratory Sarcopenia for Stratifying Postoperative Risk in Non–Small Cell Lung Cancer

Physical biomarkers for stratifying patients with lung cancer into subtypes suggestive of outcomes are underexplored. To investigate the clinical utility of respiratory sarcopenia for optimizing postoperative risk stratification in patients with non-small cell lung cancer (NSCLC). This retrospective cohort study reviewed consecutive patients undergoing lobectomy and mediastinal lymph node dissection for NSCLC at 2 institutions in Tokyo, Japan, between 2009 and 2018. Eligible patients underwent electronic computed tomography image analysis. Follow-up began at the date of surgery and continued until death, the last contact, or March 2022. Data analysis was performed from April 2022 to March 2023. Respiratory sarcopenia was identified by poor respiratory strength (peak expiratory flow rate) and was confirmed by a low pectoralis muscle index (PMI; pectoralis muscle area/body mass index). Patients with poor peak expiratory flow rate but normal PMI received a diagnosis of pre-respiratory sarcopenia. Short-term and long-term postoperative outcomes were compared among patients with a normal status, pre-respiratory sarcopenia, and respiratory sarcopenia. Group differences were analyzed using the Kruskal-Wallis test and Pearson χ2 test for continuous and categorical data, respectively. Survival differences were compared using the log-rank test. Univariable and multivariable analyses were conducted using the Cox proportional hazards model. Of a total of 1016 patients, 806 (497 men [61.7%]; median [IQR] age, 69 [64-76] years) were eligible for electronic computed tomography image analysis. The median (IQR) duration of follow-up for survival was 5.2 (3.6-6.4) years. Respiratory strength was more closely correlated with PMI than pectoralis muscle radiodensity (Pearson r2, 0.58 vs 0.29). Respiratory strength and PMI declined with aging simultaneously (both P for trend < .001). Pre-respiratory sarcopenia was present in 177 patients (22.0%), and respiratory sarcopenia was present in 130 patients (16.1%). The risk of postoperative complications escalated from 82 patients (16.4%) with normal status to 39 patients (22.0%) with pre-respiratory sarcopenia to 39 patients (30.0%) with respiratory sarcopenia (P for trend < .001), as did the risk of delayed recovery after surgery (P for trend < .001). Compared with patients with normal status or pre-respiratory sarcopenia, patients with respiratory sarcopenia exhibited worse 5-year overall survival (438 patients [87.2%] vs 133 patients [72.9%] vs 85 patients [62.5%]; P for trend < .001). Multivariable analysis identified respiratory sarcopenia as a factor independently associated with increased risk of mortality (hazard ratio, 1.83; 95% CI, 1.15-2.89; P = .01) after adjustment for sex, age, smoking status, performance status, chronic heart disease, forced expiratory volume in 1 second, diffusing capacity for carbon monoxide, C-reactive protein, albumin, carcinoembryonic antigen, histology, and pathologic stage. This study identified individuals at higher risk of poor outcomes by screening and staging respiratory sarcopenia. The early diagnosis of respiratory sarcopenia could optimize management strategies and facilitate longitudinal care in patients with NSCLC.

Clinical characteristics of chronic obstructive pulmonary disease according to smoking status.

COPD can be caused by various factors, including lung infections, asthma, air pollution, childhood growth disorders, and genetic factors, although smoking is a predominant risk factor. The main pathological mechanisms in COPD involve small airway disease, emphysema, mucus hypersecretion, and vascular disorders. COPD in non-smokers is characterized by normal FEV1 decline, equal distribution of sex, younger age of onset, fewer comorbidities, milder airflow obstruction, normal diffusing capacity of the lungs for carbon monoxide (DLCO) and radiological features such as more air-trapping and less severe emphysema, compared to COPD in smokers. COPD in non-smokers is still accompanied by a high prevalence of acute exacerbation almost equal to COPD in smokers. Moreover, COPD per se is an independent risk factor for the development of lung cancer, irrespective of smoking status. Considering that COPD coexists with numerous comorbidities, effective management of these comorbidities is essential, and multifaceted efforts are required for the comprehensive treatment of COPD.

Carbon Monoxide Intoxication Leading to Crush Syndrome and Acute Renal Failure: A Case Report

Carbon Monoxide Intoxication Leading to Crush Syndrome and Acute Renal Failure: A Case Report

Redox Gradient Shapes the Chemical Composition of Peatland Microbial Communities.

The response of soil carbon to climate change and anthropogenic forcing depends on the relationship between the physicochemical variables of the environment and microbial communities. In anoxic soils that store large amounts of organic carbon, it can be hypothesized that the low amount of catabolic energy available leads microbial organisms to minimize the energy costs of biosynthesis, which may shape the composition of microbial communities. To test this hypothesis, thermodynamic modeling was used to assess the link between redox gradients in the ombrotrophic peatland of the Marcell Experimental Forest (Minnesota, USA) and the chemical and taxonomic composition of microbial communities. The average amino acid composition of community-level proteins, called hereafter model proteins, was calculated from shotgun metagenomic sequencing. The carbon oxidation state of model proteins decreases linearly from -0.14 at 10 cm depth to -0.17 at 150 cm depth. Calculating equilibrium activities of model proteins for a wide range of chemical conditions allows identification of the redox potential of maximum chemical activity. Consistent with redox measurements across peat soils, this model Eh decreases logarithmically from an average value of 300 mV at 10 cm depth, close to the stability domain of goethite relative to Fe2+, to an average value of -200 mV at 150 cm, within the stability domain of CH4 relative to CO2. The correlation identified between the taxonomic abundance and the carbon oxidation state of model proteins enables predicting the evolution of taxonomic abundance as a function of model Eh. The model taxonomic abundance is consistent with the measured gene and taxonomic abundance, which evolves from aerobic bacteria at the surface including Acidobacteria, Proteobacteria, and Verrumicrobia, to anaerobes at depth dominated by Crenarchaeota. These results indicate that the thermodynamic forcing imposed by redox gradient across peat soils shapes both the chemical and taxonomic composition of microbial communities. By providing a mechanistic understanding of the relationship between microbial community and environmental conditions, this work sheds new light on the mechanisms that govern soil microbial life and opens up prospects for predicting geochemical and microbial evolution in changing environments.

COCCON Measurements of XCO2, XCH4 and XCO over Coal Mine Aggregation Areas in Shanxi, China, and Comparison to TROPOMI and CAMS Datasets

This study presents the first column-averaged dry-air mole fractions of carbon dioxide (XCO2), methane (XCH4) and carbon monoxide (XCO) in the coal mine aggregation area in Shanxi, China, using two portable Fourier transform infrared spectrometers (EM27/SUNs), in the framework of the Collaborative Carbon Column Observing Network (COCCON). The measurements, collected over two months, were analyzed. Significant daily variations were observed, particularly in XCH4, which highlight the impact of coal mining emissions as a major CH4 source in the region. This study also compares COCCON XCO with measurements from the TROPOspheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5P satellite, revealing good agreement, with a mean bias of 7.15 ± 9.49 ppb. Additionally, comparisons were made between COCCON XCO2 and XCH4 data and analytical data from the Copernicus Atmosphere Monitoring Service (CAMS). The mean biases between COCCON and CAMS were −6.43 ± 1.75 ppm for XCO2 and 15.40 ± 31.60 ppb for XCH4. The findings affirm the stability and accuracy of the COCCON instruments for validating satellite observations and detecting local greenhouse gas sources. Operating COCCON spectrometers in coal mining areas offers valuable insights into emissions from these high-impact sources.

Post Mortem Molecular Biomarkers of Asphyxia: A Literature Review

Asphyxia is a critical condition characterized by inadequate oxygen supply to the body. Post mortem diagnostics of asphyxia present significant challenges in forensic pathology, particularly when there are equivocal signs during autopsy or uncertain circumstantial data. The identification of biochemical biomarkers that indicate asphyxia has emerged as a promising area of research, as these markers can provide vital insights into the physiological changes occurring at the cellular level during asphyxiation. We performed a review of the scientific literature on the search engines Pubmed and Scopus in order to assess the state of the art on this topic. The aim of this study is to analyze which are the most promising markers and methods in the post mortem diagnosis of asphyxia. The literature review highlighted the great potential that molecular investigations can have in the analysis of this type of death, especially considering that hypoxia determines strong biochemical alterations in response to cellular stress. These changes are marked by specific biochemical alterations, which can be detected through various advanced technologies and methodologies, including mass spectrometry, immunohistochemistry, and metabolomic profiling. The review evidenced a combination of markers that can be used for diagnostic purposes in various cases, including mechanical asphyxia, carbon monoxide (CO) poisoning, perinatal asphyxia, and drowning analysis. However, we highlight that, to date, there are still no standard protocols for forensic biochemistry in asphyxia. By scrutinizing the reliability of identified biomarkers and their potential to reshape forensic investigative practices, this research aims to elucidate the critical role that post mortem biochemical analysis can play in diagnosing asphyxia, ultimately contributing to a more nuanced understanding of death-related scenarios and the development of standardized protocols in forensic examinations.

The Research on Factors Influencing Air Pollution

The rapid development of urbanization contributes to that the people’ life is more and more beautiful and their quality of life is better and better. There are a lot of complex and diversity influencing of air pollutants. This paper finds a lot of articles and reports of government and focus on four air pollutants: carbon monoxide, ozone, nitrogen oxides, and particulate matter, including ultra-fine particles. Air pollution can cause three major environmental problems, including greenhouse effect, acid rain, and ozone hole, which can cause significant damage to the lungs and respiratory tract of the human body, such as chronic lung disease, neurological damage, and heart disease. The purpose of the article is to find some factors that affect air pollution. Using the method of multiple linear regression turns out that there is a significant linear regression relationship between human activities, exhaust emissions from vehicles, ships, airplanes, industrial pollutant, meteorological conditions, landform and PM2.5, while the speed and direction of wind fail the important test.

Разложение аммиака на Co-Al2O3 /SiO2 катализаторах: влияние способов восстановления кобальта

The focus on "green" energy requires the search for environmentally friendly energy storage systems. The reason for choosing ammonia as a potential storage for hydrogen is its high energy capacity and the absence of carbon and nitrogen oxide emissions during decomposition. Herein, we tested Co-Al2O3/SiO2 ammonia decomposition catalysts that had been pre-activated via cyclic hydrogenation-carburization-hydrogenation (RCR) and reduction-oxidation-reduction (ROR) procedures versus the conventional cobalt oxides reduction with hydrogen (R). The samples were characterized by H2-TPR, TEM and synchrotron X-ray diffraction techniques, which revealed that the structural properties of the catalysts were not modified by the reaction. Since the activities of the tested catalysts and the effective reaction barriers appeared to be close, the easiest-to-prepare catalyst R was chosen for the long-term catalytic trial (500 h), and it showed excellent performance stability.