Oxidation Bed Research Articles

A New Arrangement for the Air Cleanup System to Recover Tritium

At present, the standard arrangement of the air cleanup system responsible for emergency tritium recovery from room air is a catalytic oxidation bed with a heater followed by an adsorption bed with a cooler. One disadvantage of this arrangement is that trouble with the heater or the cooler could result in a loss of capacity to recover tritium. Another disadvantage of the catalyst-adsorption-bed arrangement is that tritiated water must be recovered with a high decontamination factor after dilution with a large amount of water vapor in the working atmosphere.The performance of a new arrangement for the air cleanup system, which consists of a precious metal catalyst bed preceded by an adsorption bed without heating equipment, is discussed. According to calculations, most of the tritium released to the room air is recovered in the catalyst bed through oxidation, adsorption, and isotope exchange reaction when the new arrangement is applied. The adsorption bed placed before the catalyst bed dehumidifies the process gas to such a degree that the oxidation reaction of tritium in the catalyst bed is not hindered by water vapor.

A Comparative Assessment of Flue Gas Treatment Processes Part II—Environmental and Cost Comparison

The developmental status, projected costs, and environmental effects of 14 flue gas treatment processes are compared on a common basis in two consecutive issues of JAPCA. Part I summarized the background and study basis and Part II compares environmental impact and relative costs. Each process is assumed to be associated with a grass roots installation that includes a modern 800 MW power plant burning Illinois No. 6 coal. Also considered is the effectiveness of these processes to control particulate matter, NOx, trace inorganics, and polyorganic matter. The processes are divided into those operating once-through (Limestone, Lime, Limestone and Lime, Dual-Alkali), and with regeneration (Magnesia, Wellman-Lord, Citrate, Aqueous Carbonate, IFP-Catalytic Inc., Copper-Dry Bed, and Carbon-Dry Bed). Also analyzed are NOx control processes that are compatible with scrubbers or dry processes, and include the Exxon Thermal DeNOx, Ozone NO Oxidation, and Copper and Carbon-Dry Bed.