Output Voltage Variation Research Articles

DEVELOPMENT PROCESS OF A FREQUENCY CONVERTER FOR INDUCTION HEATING OF OIL PIPELINE

The article provides a detailed overview of the history, development and applications of frequency converters, with particular emphasis on their use in the oil and gas industry. It traces the evolution of frequency converters from their inception in the late 19th and early 20th centuries to their modern applications, which use microprocessors and digital signal processing to precisely control the output frequency. In the oil and gas industry, frequency converters are critical to efficient and accurate induction heating of pipelines. They convert a fixed frequency and voltage power supply into a variable frequency and variable voltage output, controlling the speed of the induction motors used in the heating process. The article also covers the design and modeling of frequency converters, discussing the process of characterizing them, creating mathematical models, and using modeling software tools such as MatLab. It presents equations for inductive energy, capacitor energy, resonance conditions and power factor, which are necessary in the mathematical modeling of frequency converters. The article concludes by highlighting the impact of frequency converters on the efficiency and economics of induction heating systems. It emphasizes the need for careful design and modeling to ensure optimal performance and safety.

High-Frequency Modified Bridgeless AC-DC PFC Rectifier for Ceiling-Fan

High current percentage total harmonics distortion (%THD), low supply power factor (SPF), and high input-power are main concern in an existing brushless direct current motor ceiling-fan (BLDCMCF). This paper presents AC-DC coupled-inductor-based bridgeless switched-inductor Cuk-converter (CIB-BLSICC) for BLDCMCF to address these concerns. CIB-BLSICC improves supply power quality (SPQ) and reduces input-power. Switched-inductor branch using coupled-inductor provides high-step-down-gain (HSDG), which offers an appropriate operating duty for BLSICC. Front-end CIB-BLSICC is developed in discontinuous mode (DCM) with changeable output voltage and a low component count, which reduces converter's overall size. DCM design offers auto power-factor correction (PFC) at a supply-mains. Variable output-voltage makes voltage source inverter (VSI) control easy (offers inverter switching at fundamental-frequency) with low switching-losses and helps speed-control. In addition to improving CF's (ceiling-fan's) overall efficiency, bridgeless design of PFC-converter lowers losses caused by conduction. Using reference speed of fan, CIB-BLSICC calculates its operational duty in order to create fixed-frequency PWM-pulses (200 kHz) while supply-voltage remains constant. This simple-control brings CF's price down by removing need for a sophisticated sensing-circuit, a DC-link sensor, and a voltage-controller. Test results confirm concept and design, which demonstrate a %THD of 1.483%, a crest-factor of 1.48, SPF of 0.9991, and a power-input of 27.93 W.

A 0.01–50 GHz power detector with temperature compensation and wideband DC‐blocking capacitor

AbstractThis letter presents a 0.01–50‐GHz resistive matching power detector implemented in a commercial 0.15‐ GaAs pseudomorphic high electron mobility transistor technology. An analytical expression is derived for the voltage responsivity of the detector as a function of temperature. To compensate for the temperature dependence of the detector, bias diode topology and mesa resistor load are employed. For an input power of −20 dBm at 1 GHz, the maximum variation of the detector output voltage is less than 0.5 dB over the temperature from C to C. The detector's S11 is less than −8 dB, the dynamic range (DR) is 55 dB, and the maximum voltage responsivity is 700 V/W. An on‐chip wideband capacitor with a bent‐strip shape is designed for direct current blocking. The detector can be used for wideband power monitoring and power amplifier control loop for its high DR and temperature stability.

Wild horse optimization algorithm implementation in 7-level packed U-cell multilevel inverter to mitigate total harmonic distortion

Introduction. Multilevel inverters (MLIs) are a popular industrial and, more especially, renewable energy application solution. This is because of its appetite for filters, low distortion class, and capacity to provide a multilayer output voltage that resembles a pure sine waveform. The novelty is in applying the wild horse optimization algorithm (WHOA) to adjust the sinusoidal pulse width modulation (SPWM) technique by producing the optimal reference signal parameters in a new multilevel inverter architecture known as the packed U-cell multilevel inverter (PUC-MLI). Purpose. This study helps with the idea of new inverter architecture and a modified pulse width modulation (MPWM) method to make the multilevel inverter smaller, cheaper, and with less total harmonic distortion (THD). Methods. We use the proposed approach to control a 7-level, single-phase PUC-MLI. The WHOA is used to discover the optimal parameters of the additional reference sine signal after being compared with SPWM to evaluate its performance in harmonic reduction. The simulation’s outcome was validated by building a PUC-MLI prototype. Results. Experimental results and simulations validate the effectiveness of the suggested approach. The WHOA-improved MPWM approach achieves a significant reduction in THD on the PUC-MLI output voltage, as indicated by the results. Practical value. THD in MLI output voltage will be reduced without spending any cost. The suggested solution works with many MLI topologies with varying output voltage levels. References 20, tables 6, figures 12.

Rechargeable Self-Powered pressure sensor based on Zn-ion battery with high sensitivity and Broad-Range response

Flexible pressure sensors find broad applications in electronic skin, human–computer interaction, and health monitoring. However, developing self-powered flexible sensors capable of detecting both dynamic and static pressures with high sensitivity and a wide detection range remains a significant challenge. Here, we report the design and fabrication of a new rechargeable Zn-ion battery-type flexible self-powered pressure sensor (RZIB-FPS). In the device, the anode of a flexible Zn-ion battery is designed into a sandwich configuration with a porous isolation layer in between a conductive layer decorated with polymethylmethacrylate microspheres and a flexible Zn electrode. The self-powered pressure sensing mechanism relies on the variation in output voltage resulting from the resistance change of the anode when subjected to external pressure. This RZIB-FPS exhibits an open-circuit voltage of 1.46 V, an energy density of 392 µWh cm−2, a high sensitivity (up to 42.6 mV kPa−1), a wide pressure detection range (up to 330 kPa), and excellent cycling stability (up to 12,000 cycles). Furthermore, the proposed all-in-one device design demonstrates excellent charge–discharge performance, manifesting its high integration level and potential for sensor miniaturization. This study introduces a new strategy for developing high-performance sensors for future self-powered smart wearable electronics.

Study of performance evaluation of various characteristics of a single phase full bridge inverter circuit using surrounded channel junctionless field effect transistor

This paper reports the characteristics study of a single phase full bridge power electronic inverter circuit with a new type of technology namely surrounded channel junctionless field effect transistor (SCJLFET) as a switch. The inverter circuit has been designed using mixed mode simulation platform of TCAD device simulator. The transient characteristics for various temperatures and work functions have been analysed. In the steady state analysis the output current and voltage variation with input voltage with various temperatures and work functions have been studied. The power factor variations with gate oxide thickness and dielectric constant of gate dielectric. The simulation and designing process along with pros and cons have been characterized. The SCJLFET would be one of the strongest participants for advanced power electronics technology as a switches, with various virtues of high-speed operation, low power consumption and low budget process integration. It has also been found that single phase full bridge inverter is giving best results when made using SCJLFET.

The effect of switching and cycle-to-cycle variations of RRAM on 4-bit encryption/decryption process

The resistive RAM (RRAM) based in-memory computation is a promising technology to overcome the Von-Neumann bottleneck to provide fast and efficient computation. The RRAM is the most appropriate choice for cryptographic applications like encryption/decryption in which the data is computed and stored in the memory itself which enhances the security. The variability issue of RRAM namely switching or device parameter variations and cycle-to-cycle variations deteriorates the functionality of RRAM based circuits. In this paper, the XOR gate with V/R-R logic and a 4-bit encryption/decryption process are implemented using the RRAM Stanford model integrated in the Cadence circuit simulator. The output voltage variations of XOR gate and the encryption/decryption by varying switching and cycle-to-cycle parameters are analyzed. The range of switching parameters of the model that provides the accurate outputs of XOR gate and encryption/decryption is determined.

EFFICIENT DSP-BASED REAL-TIME IMPLEMENTATION OF ANFIS REGULATOR FOR SINGLE-PHASE POWER FACTOR CORRECTOR

As a widely used technology, active power factor corrector (A-PFC) circuits face many control challenges, such as nonlinearity and uncertainties. With more and more power electrical appliances that are connected to the utility grid, the A-PFC is for the task of improving the power quality (PQ) to meet the requirement of the international standards, and this results in great challenges for keeping the total harmonic distortion (THD) as long as a power factor in the desired ranges. To this end, this paper focuses on the simulation and real-time implementation of a combined adaptive neural-fuzzy inference system (ANFIS) and predictive current controller for a single-phase PFC rectifier. The proposed control method has a simple, low-cost structure for better response and robustness. The performance of the proposed control approach was evaluated in real-time based on the dSPACE 1104 digital signal processor for different reference and load conditions. The results obtained from simulation and experimental tests validate the superiority of the proposed approach by evidencing a unity power factor, lower THD, fast dynamic response, and robustness against fast load and output voltage variations.

Simulation and optimization of EMI filter of conducted emission for high voltage gain DC-DC converter

In the continuity of the work on design of high voltage gain DC-DC converter, used for feeding the CubeSat electrospray thrusters with a variable output voltage according to the maneuver size, this paper introduces a simulation of the converter model with MATLAB/Simulink to determine its conducted emission level. By referring to the MIL-STD-461 standard, a required passive electromagnetic interference (EMI) filter parameters are calculated to reduce, under thresholds, the converter noise. With consideration of the available volume and power constraints in this kind of satellite, the design of common-mode (CM) choke is optimized with proposed procedure optimization, so as to reduce its volume and electrical losses. Also, this optimization procedure can be generalized and applied for any passive EMI filter design.

PENERAPAN SENSOR FLOAT MAGNETIC LEVEL GAUGE PADA SISTEM MONITORING LEVEL CAIRAN LIMBAH

In the industrial world, especially in the metal processing sector, in this case in the steel roll production process, the problem faced is that controlling the pump motor in the hydraulic room is still done manually so that the waste water reservoir in the hydraulic room overflows which causes the floor to be slippery and dangerous. . By using the float magnetic level gauge method which consists of a reed switch as the main component to take height level readings. The neodymium magnet used in the buoy functions as a trigger to activate the reed switch when the buoy height reaches a certain level. The use of the voltage divider principle is to obtain variations in the sensor output voltage which is then converted into water level readings. The process of monitoring waste liquid levels uses LabVIEW software. Research has been tested in one of the departments in the metal processing industrial area which obtained the results that the sensor readings correctly provide an output signal to the microcontroller which functions as a relay controller which activates the drain pump motor when it reaches full level. With a monitoring system, users can control the system via computer without having to go directly to the field to activate the pump motor manually

Numerical and experimental investigation on NbTi superconducting liquid helium level sensor based on a resistance heating

A resistance-heated NbTi superconducting liquid helium level sensor based on the principle of thermal conduction is proposed. A heat transfer model for the sensor was established, and its mathematical model was characterized. The effects of temperature, current, heating resistance value, and superconducting wire diameter on the sensor performance were investigated. It indicates that the temperature of the sensor in the vapor phase is decreased linearly from high to low, and the voltage is decreased with the increase of the liquid level. And the 45 μm diameter superconducting wire has a minimum propagation current, a minimal heat input to the system, and a small measurement error. The variation of the sensor output voltage with a level height was studied experimentally. The linear correlation coefficients R2 of the 1 Ω, 5.1 Ω, and 10 Ω sensors are all greater than 0.999, which are almost identical to the simulation results. The sensor’s response time is all less than 1 s, the sensitivity is 8.7070 mV/mm, 8.0110 mV/mm, and 6.9660 mV/mm, respectively, and the accuracy is 0.8226%, 0.8611%, and 0.9030%.

Design, fabrication and experimental analysis of piezoresistive bidirectional acoustic sensor

PurposeIdentification of the direction of the sound source is very important for human–machine interfacing in the applications such as target detection on military applications and wildlife conservation. Considering its vast applications, this study aims to design, simulate, fabricate and test a bidirectional acoustic sensor having two cantilever structures coated with piezoresistive material for sensing has been designed, simulated, fabricated and tested.Design/methodology/approachThe structure is a piezoresistive acoustic pressure sensor, which consists of two Kapton diaphragms with four piezoresistors arranged in Wheatstone bridge arrangement. The applied acoustic pressure causes diaphragm deflection and stress in diaphragm hinge, which is sensed by the piezoresistors positioned on the diaphragm. The piezoresistive material such as carbon or graphene is deposited at maximum stress area. Furthermore, the Wheatstone bridge arrangement has been formed to sense the change in resistance resulting into imbalanced bridge and two cantilever structures add directional properties to the acoustic sensor. The structure is designed, fabricated and tested and the dimensions of the structure are chosen to enable ease of fabrication without clean room facilities. This structure is tested with static and dynamic calibration for variation in resistance leading to bridge output voltage variation and directional properties.FindingsThis paper provides the experimental results that indicate sensor output variation in terms of a Wheatstone bridge output voltage from 0.45 V to 1.618 V for a variation in pressure from 0.59 mbar to 100 mbar. The device is also tested for directionality using vibration source and was found to respond as per the design.Research limitations/implicationsThe fabricated devices could not be tested for practical acoustic sources due to lack of facilities. They have been tested for a vibration source in place of acoustic source.Practical implicationsThe piezoresistive bidirectional sensor can be used for detection of direction of the sound source.Social implicationsIn defense applications, it is important to detect the direction of the acoustic signal. This sensor is suited for such applications.Originality/valueThe present paper discusses a novel yet simple design of a cantilever beam-based bidirectional acoustic pressure sensor. This sensor fabrication does not require sophisticated cleanroom for fabrication and characterization facility for testing. The fabricated device has good repeatability and is able to detect the direction of the acoustic source in external environment.

Non-invasive glucometer monitoring system through optical based near-infrared sensor method

ABSTRACT Diabetes is a fast-developing medical issue that causes most renal and cardiac illnesses. Thus, diabetes management requires regular glucose monitoring. One potential technology is non-invasive glucometer monitoring. This work aims to develop a user-friendly near-infrared sensor-based non-invasive glucose monitoring system, correlating sensor output voltage variations with glucose levels, to provide accurate and convenient glucose monitoring for diabetes management. The objective is to validate the system’s accuracy against existing fingerpick methods and analyze its performance across different age groups and food intake conditions through experimental testing and Clarke grid analysis. In our research, we propose a near-infrared sensor-based non-invasive-type glucose monitoring technique which is a user-friendly system. The experimental setup and prototype system are designed and implemented for measuring the variation of glucose level with respect to a sensor output voltage. Using Beer Lambert’s law, the established results correlated the absorbance property of light with the sample concentration level. Demonstration of testing for different aged people was done under various food intake conditions. The obtained results are tabulated and validated with the existing fingerpick method and achieved an accuracy of 97.8%. Also, Clarke grid analysis has been done and depicted the pattern obtained.

Analysis and Optimization of a Regenerative Snubber for a GaN-Based USB-PD Flyback Converters

This paper presents a high-efficiency GaN-based 65 W Quasi-Resonant (QR) Flyback converter. The converter is characterized by a wide input voltage range and a variable output voltage, and it is designed as a Switch Mode Power Supply (SMPS) for high power density USP-Power Delivery (USB-PD) applications. To increase the efficiency and power density, a regenerative snubber clamp solution has been used to limit the excursion of the drain voltage during the power switch turn-off. The activity involved the modeling of the converter, the sizing of the regenerative snubber, and the design of the flyback transformer. Furthermore, a dedicated test application board was used to verify the effectiveness of the solution. The results were compared with those obtained using a flyback converter with an RCD snubber.

Effect of pin‐to‐plate atmospheric cold plasma on technological and nutritional functionality of horse gram (Macrotyloma uniflorum) flour

AbstractAtmospheric cold plasma (CP), an acclaimed nonthermal technology, has gained popularity for its effective microbial inactivation in food materials, concurrently improving functional and nutritional aspects. Despite the nutraceutical benefits, horse gram (Macrotyloma uniflorum) is underutilized in baking and confectionery due to presence of major antinutrients. Our aim is to leverage CP to enhance horse gram's properties, promoting its viability in these sectors. The present study investigates the effect of CP treatment with varying output voltage (10–30 kV) and exposure time (5–25 min) on horse gram flour's nutritional, functional, and antinutritional properties. Moreover, the molecular interactions, crystallinity, thermal stability, and morphological characteristics were analyzed. CP treatment doubled the nutritional properties of horse gram flour and amplified the functional attributes by 1.5 times as compared to untreated flour, but excessively higher voltage (30 kV) and time (15 and 25 min) declined them. Whereas the antinutritional components—tannin, saponin, and phytic acid—were reduced to 1.43 ± 0.01 μg TAE/g, 0.72 ± 0.01 mg diosgenin/g, and 5.26 ± 0.03 mg phytate/g, respectively, after CP treatment, enhancing digestibility of the flour up to 75%. Principal component analysis illuminated the intricate relationship between CP treatment and flour attributes. Both low voltage (10 kV) with moderate exposure (15 and 25 min) and high voltage (30 kV) with shorter duration (5 min) exhibited favorable correlations with physiochemical, bioactive, and functional properties. Conversely, high voltage with prolonged exposure displayed a notable negative correlation with antinutritional properties, structural, and thermal characteristics, revealing the nuanced impact of treatment conditions on the quality of flour. Overall, CP can be recognized as a potential novel technique for the techno‐functional reformation of underutilized food materials.Practical applicationsThe horse gram is one of the underutilized crops rather than being a huge source of health and nutritional benefits. On the other hand, cold plasma is a novel technique in food processing which can be used for improvement of structural and functional properties of food products. That is why the purpose of the study not only was to enlighten the nutritional composition of the horse gram flour but also to improvise its techno functional qualities using cold plasma. However, the presence of the antinutrients in the horse gram flour acts as constraints for digestibility. The application of cold plasma on horse gram flour reduced the antinutrients present in it as well as improved the physiochemical and nutritional characteristics significantly. Moreover, the structural characteristics of the flour were affected by cold plasma which increased its stability for longer shelf life. Furthermore, the functionality of the flour was enhanced which showed an opportunity the better dough characteristic, emulsifying properties. These findings would help the usage of the horse gram flour as food ingredients in various bakery and confectionary food applications.

Differential pressure sensors based on transfer-free piezoresistive layered PdSe2 thin films

Piezoresistive layered two-dimensional (2D) crystals offer intriguing promise as pressure sensors for microelectromechanical systems (MEMS) due to their remarkable strain-induced conductivity modulation. However, integration of the conventional chemical vapor deposition grown 2D thin films onto a micromachined silicon platform requires a complex transfer process, which degrades their strain-sensing performance. In this study, we present a differential pressure sensor built on a transfer-free piezoresistive PdSe2 polycrystalline film deposited on a SiN x membrane by plasma-enhanced selenization of a metal film at a temperature as low as 200 °C. Based on the resistance change and finite element strain analysis of the film under membrane deflection, we show that a 7.9 nm thick PdSe2 film has a gauge factor (GF) of −43.3, which is ten times larger than that of polycrystalline silicon. The large GF enables the development of a diaphragm pressure sensor with a high sensitivity of 3.9 × 10−4 kPa−1 within the differential pressure range of 0–60 kPa. In addition, the sensor with a Wheatstone bridge circuit achieves a high voltage sensitivity of 1.04 mV·kPa−1, a rapid response time of less than 97 ms, and small output voltage variation of 8.1 mV in the temperature range of 25 °C to 55 °C. This transfer-free and low-temperature grown PdSe2 piezoresistive thin film is promising for MEMS transducer devices.

A High-Efficiency DC-DC Converter Based on Series/Parallel Switched Inductor Capacitors for Ultra-High Voltage Gains

A high-efficiency DC-DC converter employing a modified architecture called the hybrid switched inductor–capacitor series (MHSLCS) is proposed in this paper. The primary goal is to achieve a notably ultra-high voltage gain for renewable energy systems (RESs). Furthermore, the use of only one input capacitor in the MHSLCS eliminates pulsations in the input current at both low and high duty ratios. The proposed converter integrates the MHSLCS with a modified switched capacitor (MSC) that interleaves with the main MOSFET, effectively doubling the voltage transfer gain. Additionally, a modified hybrid switched inductor–capacitor parallel (MHSLCP) is incorporated in parallel with an interleaved auxiliary MOSFET. Both MOSFETs, combined with the MSC, contribute to achieving an ultra-high voltage gain. In addition, the inductors of the MHSLCP operate in a discontinuous conduction mode (DCM), which results in significant stress reductions in the power diodes and switches at high output voltages. The advantages of the proposed converter are multifaceted, demonstrating a high efficiency while minimizing the voltage in power device diodes and MOSFETs. The use of low inductance and capacitance values at high switching frequencies further enhances the performance. Wide-bandgap (WBG) power devices are employed to achieve the desired high voltage gain and efficiency. The proposed converter was designed with a PCB and underwent experimental testing to validate laboratory results. The proposed converter boosted the input voltage from 30 V to a variable output voltage between 325 V and 500 V, with a power output of 325 watts and an efficiency of 95.5%.

A detailed analysis on the heat generated inside c-Si solar cell

The heat generated inside solar cells is one of the important factors influencing the operational stability of a photovoltaic system composed of solar cells. In this work, based on the influencing factors of four main heat-generated mechanisms inside c-Si solar cells, i.e., the energy relaxation process of the hot carrier, Joule heat, recombination heat, and Peltier and Thomson effects, the distribution features of the heat generated by each mechanism are first discussed, and then, considering two common working conditions of c-Si solar cells in module form, i.e., the variations of environmental temperature and output voltage, the changing rules of the distributions of heat generated by different mechanisms are analyzed. The general features of the heat distributions of c-Si solar cells are that the obviously absorbed and released heat only exists in the regions near the front and back surfaces; the four mechanisms all release heat in the narrow n region close to the front surface; and Peltier and Thomson effects are the only mechanism of absorbed heat in the wide p region. The offset effects between released and absorbed heat make the total heat generated by the four mechanisms very small in the wide p region. With the environmental temperature increasing, the heat distribution features of each heat mechanism will remain unchanged, and except for the heat generated by the energy relaxation of the hot carrier, the released and absorbed heat generated by other mechanisms will increase in the whole c-Si active layer. With the output voltage increasing from 0 to 0.68 V, aside from the heat distribution of the energy relaxation of the hot carrier, the distributions of heat generated by other mechanisms show obvious threshold voltage effects, and only when the output voltage is larger than the threshold voltage will the heat distributions of different mechanisms be significantly changed by the variations of the output voltage.

Displacement Measurement Method Based on Double-Arrowhead Auxetic Tubular Structure

This research paper introduces an innovative technique for measuring displacement using auxetic tubular structure (ATS). The proposed displacement measurement method is based on tubular structures with a negative Poisson’s ratio. It capitalizes on the underlying principle that the elastic deformation-induced change in transmittance of the ATS can be translated into a corresponding modification in the output current of the solar cell. This method allows for the conversion of the variation in light transmission into a corresponding variation in output voltage. The construction of the ATS can be achieved through 3D-printing technology, enhancing the accessibility of displacement measurement and design flexibility. The experimental results demonstrate that the proposed measurement method exhibits a linear error of less than 8% without any subsequent signal processing and achieves a sensitivity of 0.011 V/mm without signal amplification. Furthermore, experimental results also show that the proposed method has good repeatability and can maintain a high level of reliability and sensitivity when using different measurement devices. This confirms the effectiveness and feasibility of the proposed method, showing a favorable linear relationship between the input and output of the measurement system with an acceptable sensitivity, repeatability, and reliability.

Ultra‐high voltage gain DC–DC converter based on new interleaved switched capacitor inductor for renewable energy systems

SummaryIn this paper, introduces a DC–DC converter design based on a modified hybrid switched inductor‐switched capacitor architecture, aimed at achieving ultra‐high voltage gain in renewable energy systems (RES). The proposed converter involves adding a modified boosting conversion mode (MBM) that interleaves with the main switch to double the voltage transfer gain. Additionally, a modified switched capacitor (MSC) technique, utilizing two diodes as interleaved components, is integrated into the main and auxiliary switches to verify low voltage stress across them. In addition, modified hybrid switched inductors with capacitors (MSIC) and diodes are employed to validate ultra‐high voltage gain. The main advantages of the proposed converter are its high efficiency, low voltage stress across diodes and MOSFETs, and the utilization of low values of inductors and capacitors at high switching frequencies. In addition, the voltage stress across the inductors of the (MSIC) is reduced as the duty cycle increases. Furthermore, the current stress on the main switch is reduced when the charge of capacitor C1 becomes zero. Mathematical models for both continuous conduction mode (CCM) and discontinuous conduction mode (DCM) of the proposed converter are explored. Furthermore, a dual PI controller is designed for the proposed converter to maintain a high fixed output voltage. In addition, the PCB design and experimental testing of the proposed converter to verify the simulation and laboratory results. Specifically, the proposed converter is designed to boost up voltage (30–40 V) to a variable output voltage between 200 and 300 V at 300 W at efficiency 96.7%.