Outermost Layer Research Articles

A curcumin-loaded biopolymeric nanocomposite alleviates dextran sulfate sodium induced ulcerative colitis via suppression of inflammation and oxidative stress

Functional drugs nano delivery systems manufactured from natural active products are promising for the field of biomedicines. In this study, an anti-ulcerative colitis (UC) curcumin loaded biopolymeric nanocomposite (CZNH) was fabricated and investigated. CZNH nanocomposite was obtained using the anti-solvent precipitation method, wherein curcumin-loaded zein colloidal particles served as the core, while sodium casein (NaCas) and hyaluronic acid (HA) formed the outermost layer of CZNH nanocomposite. Fourier transform infrared (FT-IR) spectrum and transmission electron microscopy (TEM) findings demonstrated that CZNH nanocomposite was a double-layer spherical micelle (250 nm) resulting from the hydrogen bond interactions and electrostatic adsorptions between zein, NaCas, and HA. Furthermore, CZNH nanocomposite exhibited prominent resuspension and storage stability in aqueous solution, which can be stored at 4 °C for approximately 30 days. In vivo anti-UC studies showed that CZNH nanocomposite could effectively alleviate UC symptoms via mediating inflammatory factors [tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), and IL-6], myeloperoxidase (MPO), and oxidative stress factor [malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px)]. This study suggested that the CZNH nanocomposite showed great promise as an efficient curcumin nanocarrier for UC therapy.

Cyclo(l-Pro-l-Tyr) Isolated from the Human Skin Commensal Corynebacterium tuberculostearicum Inhibits Tyrosinase.

Melanin is produced by melanocytes to protect human skin from harmful ultraviolet radiation. During skin cell renewal, melanin and dead skin cells are disposed of. However, prolonged exposure to ultraviolet rays or aging can disturb this cycle, leading to skin hyperpigmentation due to melanin accumulation. Tyrosinase is a crucial enzyme involved in melanin biosynthesis. Although various compounds, including tyrosine inhibitors, that counteract melanin accumulation have been reported, some, such as hydroquinone, are toxic and can cause vitiligo. Meanwhile, the skin is the largest organ and the outermost layer of the immune system, containing a diverse range of bacteria that produce low-toxicity compounds. In the current study, we aim to identify metabolites produced by skin microbiota that inhibit tyrosinase. Specifically, mushroom tyrosinase served as the study model. Following commensal skin bacteria screening, Corynebacterium tuberculostearicum was found to inhibit tyrosinase activity. The active compound was cyclo(l-Pro-l-Tyr); commercially available cyclo(l-Pro-l-Tyr) also exhibited inhibitory activity. Docking simulations suggested that cyclo(l-Pro-l-Tyr) binds to the substrate-binding site of mushroom tyrosinase, obstructing the substrate pocket and preventing its activity. Hence, cyclo(l-Pro-l-Tyr) might have potential applications as a cosmetic agent and food additive.

A diagnostic method of radial electron density distribution based on microwave transmission of cylindrical plasma along multipath

Based on the multipath propagation phase shift of electromagnetic wave in cylindrical plasma, a method to obtain the radial electron density distribution of non-uniform cylindrical plasma is proposed in this paper. Focused lens antennas are used in multipath transmission distribution diagnosis (MTDD), where the propagation area in the plasma is approximately the size of the focal spot. The equivalent propagation thickness at each layer can be calculated for each path based on the propagation region and layer thickness. Combining with Fermat's shortest wavelength principle, electromagnetic waves propagate in a straight line between different layers. The phase shift caused by the propagation of electromagnetic waves in each layer, starting from the outermost layer, can obtain layer by layer electron density. To validate the MTDD method, multipath transmission propagation phase shift was simulated in CST, and the electron density distribution was obtained, which has a good agreement with the preset electron density. In addition, the MTDD method was applied to inductively coupled plasma, and the diagnostic results showed high agreement with the Langmuir probe results. The proposed MTDD method has higher spatial resolution than the transmission diagnosis method and can provide more precise plasma parameter information.

Novel insights into the modulation of the voltage-gated potassium channel KV1.3 activation gating by membrane ceramides

Membrane lipids extensively modulate the activation gating of voltage-gated potassium channels (KV), however, much less is known about the mechanisms of ceramide and glucosylceramide actions including which structural element is the main intramolecular target and whether there is any contribution of indirect, membrane biophysics-related mechanisms to their actions. We used two-electrode voltage-clamp fluorometry capable of recording currents and fluorescence signals to simultaneously monitor movements of the pore domain (PD) and the voltage sensor domain (VSD) of the KV1.3 ion channel after attaching an MTS-TAMRA fluorophore to a cysteine introduced into the extracellular S3-S4 loop of the VSD. We observed rightward shifts in the conductance-voltage (G-V) relationship, slower current activation kinetics, and reduced current amplitudes in response to loading the membrane with C16-ceramide (Cer) or C16-glucosylceramide (GlcCer). When analyzing VSD movements, only Cer induced a rightward shift in the fluorescence signal-voltage (F-V) relationship and slowed fluorescence activation kinetics, whereas GlcCer exerted no such effects. These results point at a distinctive mechanism of action with Cer primarily targeting the VSD, while GlcCer only the PD of KV1.3. Using environment-sensitive probes and fluorescence-based approaches, we show that Cer and GlcCer similarly increase molecular order in the inner, hydrophobic regions of bilayers, however, Cer induces a robust molecular reorganization at the membrane-water interface. We propose that this unique ordering effect in the outermost membrane layer in which the main VSD rearrangement involving an outward sliding of the top of S4 occurs can explain the VSD targeting mechanism of Cer, which is unavailable for GlcCer.

Simulation of ideal blackbody based on multi-space boundary condition in FDTD

Abstract Investigation shows that it is difficult to solve the electromagnetic field surrounding an ideal blackbody using the analytic method. To solve this problem, the simulation method should be adapted, and the Maxwell function should be expanded to multi space. In this paper, a multi space simulation scheme of finite difference time domain (FDTD) and a multi space boundary condition (MSBC) are proposed for the simulation of an ideal blackbody. Compared with the traditional absorbing boundary condition (ABC) or perfectly matched layer (PML), which can only be assigned in the outermost layers of the simulation space, the proposed MSBC is simpler and can be arranged inside the computing space. Numerical simulation shows that MSBC has good electromagnetic wave absorption performance and can simulate the ideal blackbody accurately. At the same time, the simulation results also show some interesting characteristics of electromagnetic waves around the ideal blackbody.

Ayurveda management of Savrana Shukla (superficial punctate keratitis): a case study

Abstract Savrana Shukla is one of the Krishnagata Rogas (corneal pathologies) mentioned in Ayurvedic texts. The Lakshanas of Savrana Shukla can be correlated with the clinical features of superficial punctate keratitis. Superficial punctate corneal keratitis is characterized by multiple, spotty lesions in the outermost layer of the cornea. A 30-year-old male approached the Shalakya Tantra outpatient department with complaints of foreign body sensation, mild pricking pain, redness, and watering of the left eye for 4 days. On history taking and slit lamp examination, it was revealed that the patient had superficial punctate keratitis due to trichiasis. Seka (pouring medicine on the closed eyes) and Vidalaka (application of medicated paste on the outer part of the eyes) were given as treatment for 5 days and epilation was done considering the cause (trichiasis). The subject had significant improvement for both subjective and objective parameters. The clinical features in this subject correspond to Prathama Patala Savrana Shukla Lakshanas (epithelium and Bowman’s membrane involvement) and are Sadhya (curable) according to Acharya Vagbhata. This case report highlights the efficacy of Kriyakalpa treatments in managing Savrana Shukla.

Canine inherited retinal degeneration as model to study disease mechanisms and therapy for ciliopathies

Humans have a highly developed retina and obtain approximately 80% of their external information from vision. Photoreceptor cells, which are located in the outermost layer of the neuroretina and recognize light signals, are highly specialized sensory cilia that share structural and functional features with primary cilia. Genetic disorders of the retina or photoreceptor cells are termed inherited retinal diseases (IRDs) and are caused by variants in one of more than 280 genes identified to date. Among the genes responsible for IRDs, many are shared with those responsible for ciliopathies. In studies of inherited diseases, mouse models are commonly used due to their advantages in breeding, handling, and relative feasibility in creating pathological models. On the other hand, structural, functional, and genetic differences in the retina between mice and humans can be a barrier in IRD research. To overcome the limitations of mouse models, larger vertebrate models of IRDs can be a useful research subject. In particular, canines have retinas that are structurally and functionally similar and eyes that are anatomically comparable to those of humans. In addition, due to their unique veterinary clinical surveillance and genetic background, naturally occurring canine IRDs are more likely to be identified than in other large animals. To date, pathogenic mutations related to canine IRDs have been identified in more than 30 genes, contributing to the understanding of pathogeneses and to the development of new therapies. This review provides an overview of the roles of the canine IRD models in ciliopathy research.

Panel Dinding Pracetak dari Limbah Pukat dan Serabut Kelapa Berlapis Resin Polyester dengan Motif Desain Glow in the Dark

Using concrete blocks, light bricks, red bricks, thick plastering, and action affects the cost budget. This encouraged the author to create wall panels that are ready to install and do not require mortar mix in finishing. Along with this, trawl and coconut fiber waste were the main materials used in making wall panels, and an additional M6 wire mesh iron was used as reinforcement for the construction. The outermost layer was coated with SHCP 2668 clear polyester resin and catalyst combined with phosphorus strontium aluminate powder and metallic pigment coloring. The method used in this research is the experimental method by making four compositional comparisons for each test with three test objects each. The results of this study are the most optimum composition in a mixture of 1.5: 2.75: 1.5, which has a compressive strength of 13.5 N/mm2 and flexural strength of 2.49 N/mm2 by SNI 03-3122-1992, is ductile, reflective, has a sound absorption of 0.290 dB by ISO10534-2 testing: 1998, water absorption (DSA) of 0.91% by SNI 03-0349-1989, fire resistance at a rate of 0.22 mm/second by modified SNI 1741-2008 testing, able to emit light for 2-3 hours from a 20-minute lighting source by JIS Z 9107 and JIS Z 9095 testing, and has a lower price than other wall panels.

Mechanical Characterization, Water Absorption, and Thickness Swelling of Lightweight Pineapple Leaf/Ramie Fabric-Reinforced Polypropylene Hybrid Composites.

Fiber-reinforced composites are among the recognized competing materials in various engineering applications. Ramie and pineapple leaf fibers are fascinating natural fibers due to their remarkable material properties. This research study aims to unveil the viability of hybridizing two kinds of lignocellulosic plant fiber fabrics in polymer composites. In this work, the hybrid composites were prepared with the aid of the hot compression technique. The mechanical, water-absorbing, and thickness swelling properties of ramie and pineapple leaf fiber fabric-reinforced polypropylene hybrid composites were identified. A comparison was made between non-hybrid and hybrid composites to demonstrate the hybridization effect. According to the findings, hybrid composites, particularly those containing ramie fiber as a skin layer, showed a prominent increase in mechanical strength. In comparison with non-hybrid pineapple leaf fabric-reinforced composites, the tensile, flexural, and Charpy impact strengths were enhanced by 52.10%, 18.78%, and 166.60%, respectively, when the outermost pineapple leaf fiber layers were superseded with ramie fabric. However, increasing the pineapple leaf fiber content reduced the water absorption and thickness swelling of the hybrid composites. Undeniably, these findings highlight the potential of hybrid composites to reach a balance in mechanical properties and water absorption while possessing eco-friendly characteristics.

Porous-anodic-alumina-templated Ta-Nb-alloy/oxide coatings via the magnetron-sputtering/anodizing as novel 3D nanostructured electrodes for energy-storage applications

The Ta-52 at.%Nb thin alloy films were magnetron sputter-deposited over a low-aspect-ratio nanoporous anodic-alumina template formed in 0.05 M tartaric acid solution at 250 V and modified by the pore-widening technique to enlarge the pores up to ∼500 nm. The alloy coated the pores evenly, thus forming a 3D continuous conducting nanofilm on the template. Partially anodizing the templated alloy in a borate buffer solution of pH 7.5 generated a compact amorphous mixed-oxide anodic film thickening proportionally to the applied voltage. It was revealed that the oxide on the Ta-52 at.%Nb alloy grows with a slower migration of Ta5+ ions relative to Nb5+ ions, resulting in mixing Ta2O5 and Nb2O5 in the film depth and forming a few-nm-thick Nb2O5 outmost layer. The unique migration of Ta4+, Ta3+, Nb4+, and Nb3+ ions is assumed accountable for forming corresponding suboxides in the 3D anodic film in contrast to a flat Ta-52 at.%Nb alloy film used as a reference. The 3D anodic films behave as an n-type semiconductor with a low donor density Nd = ∼2 × 1018 cm−3, appropriate for dielectric applications. An unusual two-layered structure with a sharp electrical interface revealed in the 3D oxide films anodized to 30–130 V, comprising a low-resistivity layer superimposed on the high-resistivity layer, is explained by an immobile negative space charge in the outer film part. The air-annealing at moderate temperatures releases the space charge and transforms the two layers into a high-resistivity single layer having substantially improved dielectric properties and thermostable (up to 250 °C) capacitance of 1.2 μF cm−2 achieved for the film anodized to practical 50 V. The 3D films having up to 4.5 times enlarged effective surface area can be utilized as novel metal/oxide nanostructured electrodes for electrolytic microcapacitors suitable for classical electronic circuits and energy-storage applications.

The Sphingosine and Phytosphingosine Ceramide Ratio in Lipid Models Forming the Short Periodicity Phase: An Experimental and Molecular Simulation Study.

The lipids located in the outermost layer of the skin, the stratum corneum (SC), play a crucial role in maintaining the skin barrier function. The primary components of the SC lipid matrix are ceramides (CERs), cholesterol (CHOL), and free fatty acids (FFAs). They form two crystalline lamellar phases: the long periodicity phase (LPP) and the short periodicity phase (SPP). In inflammatory skin conditions like atopic dermatitis and psoriasis, there are changes in the SC CER composition, such as an increased concentration of a sphingosine-based CER (CER NS) and a reduced concentration of a phytosphingosine-based CER (CER NP). In the present study, a lipid model was created exclusively forming the SPP, to examine whether alterations in the CER NS:CER NP molar ratio would affect the lipid organization. Experimental data were combined with molecular dynamics simulations of lipid models containing CER NS:CER NP at ratios of 1:2 (mimicking a healthy SC ratio) and 2:1 (observed in inflammatory skin diseases), mixed with CHOL and lignoceric acid as the FFA. The experimental findings show that the acyl chains of CER NS and CER NP and the FFA are in close proximity within the SPP unit cell, indicating that CER NS and CER NP adopt a linear conformation, similarly as observed for the LPP. Both the experiments and simulations indicate that the lamellar organization is the same for the two CER NS:CER NP ratios while the SPP NS:NP 1:2 model had a slightly denser hydrogen bonding network than the SPP NS:NP 2:1 model. The simulations show that this might be attributed to intermolecular hydrogen bonding with the additional hydroxide group on the headgroup of CER NP compared with CER NS.

Development of Highly Flexible Piezoelectric PVDF-TRFE/Reduced Graphene Oxide Doped Electrospun Nano-Fibers for Self-Powered Pressure Sensor.

The demand for self-powered, flexible, and wearable electronic devices has been increasing in recent years for physiological and biomedical applications in real-time detection due to their higher flexibility and stretchability. This work fabricated a highly sensitive, self-powered wearable microdevice with Poly-Vinylidene Fluoride-Tetra Fluoroethylene (PVDF-TrFE) nano-fibers using an electrospinning technique. The dielectric response of the polymer was improved by incorporating the reduced-graphene-oxide (rGO) multi-walled carbon nano-tubes (MWCNTs) through doping. The dielectric behavior and piezoelectric effect were improved through the stretching and orientation of polymeric chains. The outermost layer was attained by chemical vapor deposition (CVD) of conductive polymer poly (3,4-ethylenedioxythiophene) to enhance the electrical conductivity and sensitivity. The hetero-structured nano-composite comprises PVDF-TrFE doped with rGO-MWCNTs over poly (3,4-ethylenedioxythiophene) (PEDOT), forming continuous self-assembly. The piezoelectric pressure sensor is capable of detecting human physiological vital signs. The pressure sensor exhibits a high-pressure sensitivity of 19.09 kPa-1, over a sensing range of 1.0 Pa to 25 kPa, and excellent cycling stability of 10,000 cycles. The study reveals that the piezoelectric pressure sensor has superior sensing performance and is capable of monitoring human vital signs, including heartbeat and wrist pulse, masticatory movement, voice recognition, and eye blinking signals. The research work demonstrates that the device could potentially eliminate metallic sensors and be used for early disease diagnosis in biomedical and personal healthcare applications.

Thermal stresses associated with a thermosensitive multilayered disc analysed due to point heating

In this paper, analytical solutions are presented for temperature and thermal behavior of a thermosensitive multilayered annular disc due to point heat source. Convective heating is applied to both the innermost and outermost layers. The nonlinearity of the thermal diffusivity equation is dealt using Kirchhoff’s transformation technique. A finite integral transform in the form of Bessel’s function is used to deal with the radial variable r. Fourier transform and angular eigen functions are also used to solve the thermal diffusivity equation. Deflection, resultant forces, shearing forces, resultant moments and thermal stresses are obtained. A mathematical representation is formulated for a 3-layered disc, with the inner, middle and outer layers composed of copper, zinc and aluminum respectively. The results are depicted graphically.

Lipid Biomimetic Models as Simple Yet Complex Tools to Predict Skin Permeation and Drug-Membrane Biophysical Interactions.

The barrier function of the skin is primarily determined by its outermost layer, the Stratum Corneum (SC). The SC consists of corneocytes embedded in a lipid matrix composed mainly of ceramides, cholesterol, and free fatty acids in equimolar proportions and is organised in a complex lamellar structure with different periodicities and lateral packings. This matrix provides a diffusion pathway across the SC for bioactive compounds that are administered to the skin. In this regard, and as the skin administration route has grown in popularity, there has been an increase in the use of lipid mixtures that closely resemble the SC lipid matrix, either for a deeper biophysical understanding or for pharmaceutical and cosmetic purposes. This review focuses on a systematic analysis of the main outcomes of using lipid mixtures as SC lipid matrix models for pharmaceutical and cosmetic purposes. Thus, a methodical evaluation of the main outcomes based on the SC structure is performed, as well as the main recent developments in finding suitable new in vitro tools for permeation testing based on lipid models.

Eco-friendly shrink-resist finishing of wool through synergistic effect of disulfide bond reducing agent and papain

The environmental benefits of utilizing protease as a biocatalyst for wool shrink-resist finishing have been widely recognized. However, the efficacy of individual protease treatment is unsatisfactory due to its incapability towards the outermost cuticle layer of wool fibers that contains hydrophobic fatty acids. In order to weaken the structural integrity of the highly cross-linked scales and promote the enzymatic anti-felting, sodium sulfite and tris (2-carboxyethyl) phosphine hydrochloride (TCEP) were employed in combination with papain, respectively, aiming at obtaining a low shrinkage without unacceptable fiber damages. Based on the synergistic effect of papain and TCEP, the edges of wool scales were slightly destroyed by the reduction of disulfide bonds, accompanied by enzymatic hydrolysis of the keratin component. Through the controlled reduction and hydrolysis of wool scales, satisfactory anti-felting result was achieved without causing severe damage to the fiber interiors. In the presence of 0.25 g/L TCEP and 25 U/mL papain, the area shrinkage of wool fabric decreased to approximately 6 %, with a low strength loss of less than 8 %. Meanwhile, the dyeing behavior of the wool fabric under low-temperature conditions was dramatically improved, leading to decreased energy consumption during production. The present work provides an alternative for eco-friendly finishing of wool fabrics, which can be applied commercially.

Exploring surface properties and premelting in crystals.

Crystal surfaces play a pivotal role in governing various significant processes, such as adsorption, nucleation, wetting, friction, and wear. A fundamental property that influences these processes is the surface free energy, γ. We have directly calculated γ(T) for low-index faces of Lennard-Jones (LJ), germanium, and silicon crystals along their sublimation lines using the computational cleavage technique. Our calculations agree well with experimental values for Si(111) and Ge(111), highlighting the accuracy of the method and models used. For LJ crystals, we identified a premelting onset at Tpm = 0.75Tm, marked by a sharp increase in atom mobility within the second outermost surface layer. Notably, Tpm closely aligned with the endpoint of the LJ melting line at negative pressures, Tend = 0.76Tm. We hypothesize that the emergence and coexistence of a liquid film atop the LJ crystal at Tpm < T < Tm correspond to the metastable melting line under negative pressures experienced by stretched crystal surfaces. Furthermore, our study of thin LJ crystal slabs reveals that premelting-induced failure leads to recrystallization below the homogeneous freezing limit, offering a promising avenue to explore crystal nucleation and growth at extremely deep supercoolings. Finally, no evidence of premelting was detected in the model crystals of Ge and Si, which is consistent with the experimental observations. Overall, our findings offer valuable insights into crystal surface phenomena at the atomic scale.

Impact of variable electrical conductivity, viscosity on convective heat and mass transfer flow of CuO- and Al2O3-water nanofluids in cylindrical annulus

In the food industry, electrical conductivity is essential for heating processes. The dependence on temperature conductivity of electricity on the outermost layers flow of the nanofluid is the main topic of this paper. Variable electrical conductivity, viscosity, thermo diffusion, thermal radiation and radiation absorption on convective heat and mass transfer flow Cuo and Al2O3-water nano-fluids confined in cylindrical annulus. The non-linear governing equations have been solved by finite element technique with quadratic approximation functions. For various parametric adjustments, the temperature, speed, and nanoconcentration have all been examined. Similar to the cylindrical wall, quantitative evaluations have been made of the surface resistance, temperature rate and mass transport. It is discovered that for both types of nanofluids, a higher thermo-diffusion effect leads to a lower concentration and Sherwood digits on the cylinders. An augment in Q1 enriches the rapidity in CuO-water nanofluidic system as well as decreases in Al2O3-water nanofluidic. Increased Q1 lowers the real temperature and nanoconcentration in both types of nanofluids.

Rape Pollen‐Based Composite Sorbent with Thermo‐Responsive and Photothermal Properties for Atmospheric Water Harvesting

AbstractSorption‐based atmospheric water harvesting (SAWH) has great potential for clean water acquisition and renewable energy use. Adsorption and desorption properties of sorbents play a crucial role in SAWH systems. However, most sorbents with high adsorption capacities are hindered by either slow sorption/desorption kinetics or poor regeneration performance. Here, a highly efficient block copolymer composite sorbent with dual functions of thermo‐responsive and photothermal properties is designed based on rape pollens. This sorbent has a hierarchical porous structure, in which the outermost layer of poly‐pyrrole enables it to convert light energy into heat and the second layer of poly(N‐isopropylacrylamide) imparts thermo‐responsive properties to improve the desorption ability. Meanwhile, confined LiCl improves its sorption capacity and cavities of the pollen can store captured moisture to avoid liquid leakage. This sorbent can sorb moisture to more than 144% of its own weight within 3 h under 20 °C&amp;80% relative humidity (RH) and 82% of captured water can be released within 0.5 h under 1 sun. The water harvester using this sorbent can realize an exceptional water productivity of up to 2.21gwater gsorbent−1 day−1 only by three continuous water adsorption‐desorption cycles in a day. The high‐performance sorbent smooths the path for efficiently extracting water from the atmosphere to tackle water scarcity.

Manufacturing of 3D-Printed Hybrid Scaffolds with Polyelectrolyte Multilayer Coating in Static and Dynamic Culture Conditions.

Three-dimensional printing (3DP) has emerged as a promising method for creating intricate scaffold designs. This study assessed three 3DP scaffold designs fabricated using biodegradable poly(lactic) acid (PLA) through fused deposition modelling (FDM): mesh, two channels (2C), and four channels (4C). To address the limitations of PLA, such as hydrophobic properties and poor cell attachment, a post-fabrication modification technique employing Polyelectrolyte Multilayers (PEMs) coating was implemented. The scaffolds underwent aminolysis followed by coating with SiCHA nanopowders dispersed in hyaluronic acid and collagen type I, and finally crosslinked the outermost coated layers with EDC/NHS solution to complete the hybrid scaffold production. The study employed rotating wall vessels (RWVs) to investigate how simulating microgravity affects cell proliferation and differentiation. Human mesenchymal stem cells (hMSCs) cultured on these scaffolds using proliferation medium (PM) and osteogenic media (OM), subjected to static (TCP) and dynamic (RWVs) conditions for 21 days, revealed superior performance of 4C hybrid scaffolds, particularly in OM. Compared to commercial hydroxyapatite scaffolds, these hybrid scaffolds demonstrated enhanced cell activity and survival. The pre-vascularisation concept on 4C hybrid scaffolds showed the proliferation of both HUVECs and hMSCs throughout the scaffolds, with a positive expression of osteogenic and angiogenic markers at the early stages.

Surface Reconstruction of La2CuO4 during the Electrochemical Reduction of Carbon Dioxide to Ethylene and Its Benefits for Enhanced Performance.

Electrochemical reduction (ECR) of CO2 to C2H4 has a potential key role in realizing the carbon neutral future, which ultimately relies on the availability of an efficient electrocatalyst that can exhibit a high Faradaic efficiency (FE) for C2H4 production and robust, long-term operational stability. Here, for the first time, we report that upon applying reductive potential and electrolyte to the benchmark La2CuO4 catalyst, surface reconstruction occurred, i.e., the appearance of a distinctive phase evolution process over time, which was successfully monitored using ex situ powder XRD and operando Mott-Schottky (M-S) measurements of La2CuO4 samples that were soaked into the electrolyte and subjected to CO2-ECR for different durations. At the end of such a reconstruction process, an outermost layer consisting of lanthanum carbonate, a thin outer layer made of an amorphous Cu+ material formed over the core bulk La2CuO4, as confirmed by various characterization techniques, which resulted in the redistribution of interfacial electrons and subsequent formation of electron-rich and electron-deficient interfaces. This contributed to the enhancement in FE for C2H4, reaching as much as 58.7%. Such surface reconstruction-induced electronic structure tuning gives new explanations for the superior catalytic performance of La2CuO4 perovskite and also provides a new pathway to advance CO2-ECR technology.