Outdoor Exposure Research Articles

Mobility-oriented measurements of people's exposure to outdoor artificial light at night (ALAN) and the uncertain geographic context problem (UGCoP).

Advanced nighttime light (NTL) remote sensing techniques enable the large-scope epidemiological investigations of people's exposure to outdoor artificial light at night (ALAN) and its health effects. However, multiple uncertainties remain in the measurements of people's exposure to outdoor ALAN, including the representations of outdoor ALAN, the contextual settings of exposure measurements, and measurement approaches. Non-exposed but included outdoor ALAN and causally irrelevant outdoor ALAN may manifest as contextual errors, and these uncertain contextual errors may lead to biased measurements and erroneous interpretations when modeling people's health outcomes. In this study, we systematically investigated outdoor ALAN exposure measurements in different geographic contexts using either residence-based or mobility-oriented measurements, different spatial scales, and multiple NTL data sources. Based on the GPS data collected from 208 participants in Hong Kong, outdoor ALAN exposures were measured from NTL imagery at 10 m, 130 m, and 500 m spatial resolutions using in-situ methods or 100 m, 300 m, and 500 m buffer zone averaging. Descriptive analysis, multiple t-tests, and logistic regression were employed to examine the differences between outdoor ALAN exposure measurements using various contextual settings and their effects on modeling people's overall health. Our results confirmed that different contextual settings may lead to significantly different outdoor ALAN exposure measurements. Our results also confirmed that contextual errors may lead to erroneous conclusions when using improper contextual settings to model people's overall health. Consequentially, we suggest measuring people's exposure to outdoor ALAN using the mobility-oriented approach, NTL representation with the high spatial resolution, and a very small buffer zone as a contextual unit to derive outdoor ALAN exposure. This study articulates essential methodological issues induced by uncertainties in outdoor ALAN exposure measurements and can provide essential implications and suggestions for a broad scope of studies that need accurate outdoor ALAN exposure measurements.

Ion-migration analysis of degradation caused by outdoor exposure and accelerated stress testing in perovskite solar cells

In this study, we conducted outdoor exposure testing and investigated the degradation mechanism of perovskite solar cells deployed in the field. We conducted a detailed failure analysis to identify specific degradation modes induced by outdoor exposure, using current–voltage curve measurements, maximum power evaluation, and mobile-ion analysis. This analysis revealed a significant change in the ion-migration current response of the devices after exposure. These changes suggest that the modification of mobile ions and formation of defects within the perovskite materials are likely the primary causes of degradation. Additionally, we compared the solar cell characteristics observed after the field test with the results of controlled indoor accelerated stress tests, which included exposure to visible light, ultraviolet (UV) irradiation, and thermal stress. Our findings highlight that the degradation patterns induced by UV irradiation at elevated temperatures closely resemble those caused by outdoor stress. We also discuss indoor test conditions that replicate the degradation phenomena experienced during outdoor exposure. This ability to replicate outdoor degradation phenomena under laboratory conditions is crucial for accelerating the development of robust and durable perovskite solar cells.

Assessment of Outdoor Background Radiation Level and its Radiological Hazards at Jimeta and Yola Towns of Adamawa State, Nigeria

The radiation from different types of radionuclides has both advantages and disadvantages. However, detailed research reveals that the drawbacks of several radionuclides far outweigh their advantages, particularly in regions with high concentrations, posing alarming impacts on human health. The study focuses on assessing outdoor background radiation levels in Jimeta and Yola towns, Adamawa State, Nigeria. Using a well-calibrated portable halogen-quenched Geiger Muller (GM) detector at 20 locations, measurements were taken at an elevation of 1.0m above ground level, with GPS tracking for accurate location. The research evaluates radiological health hazards and radiation effective doses to different body organs based on outdoor background exposure rates. Comparison with recommended permissible limits reveals that mean values for outdoor background exposure levels (0.016 mRh-1) and absorbed dose rates (147.46 nGyh-1) exceed safety limits (0.013 mRh-1, 84.0 nGyh-1) set by UNSCEAR and ICRP. The total excessive lifetime cancer risk (ELCR) ranged from 0.33× 10−3 to 2.61× 10−3 , with a mean value of 0.78 × 10−3 , close to the world average lifetime cancer limit (1.45× 10−3 ). Despite the mean annual effective dose equivalent (AEDE) (0.2219mSvy-1) being below the recommended limit of 1.00 mSvy-1 for general public exposure, and effective doses to various body organs remaining below 1.0 mSvy-1, the study indicates potential long-term health hazards such as cancer due to accumulated doses. Generally, the study shows that Jimeta and Yola Metroplis is relatively safe radiologically with little contamination which could be attributed to the geological formation and partly due to human activity such as market and car park for transport system in the area. However, the contamination will not pose any immediate radiological health effect on resident of the area but there is tendency for long –term health hazards in the future such as cancer due to doses accumulated. It is therefore recommended that regular radiation monitoring exercise should be conducted on the area from time to time in order to checkmate both the workers and the members of public from high radiation exposure.

Effects of imidacloprid on the survival and biomarker responses of Eristalis tenax larvae (Diptera: Syrphidae): a comparative study between indoor and outdoor exposures

Imidacloprid is a widely used pesticide in agriculture. It is being found in aquatic ecosystems in agricultural regions. This study aimed to evaluate its effects on the survival rates, acetylcholinesterase (AChE) and catalase (CAT) responses of larval Eristalis tenax hoverflies. The larvae were exposed for 3, 7 and 14 days to increasing concentrations of imidacloprid (0, 0.1, 0.5 and 2 mg L−1) both indoors at a constant temperature of 20 °C and outdoors under varying environmental conditions. The results revealed that indoors and outdoors, the mortality of E. tenax significantly increased with increasing imidacloprid concentration and duration of exposure. Median lethal concentrations (LC50) varied from 0.03 to 0.17 mg L−1 depending on the duration and conditions of exposure. Indoors, AChE activity decreased in all the treatments for all three exposure durations, whereas outdoors the decrease was observed after the short (3-day) and long (14-day) exposure durations. AChE inhibition ranged from 6% to 62% (indoors) and 12% to 62% (outdoors). Variations in CAT activity were observed for both experimental setups, with a decrease outdoors in larvae exposed to 0.5 mg L−1 for 7 days and a gradual dose-dependent increase indoors for exposure lasting 3 and 7 days. This study sheds light on the potential ecological implications of imidacloprid contamination which may cause the decline of aquatic insect populations and pollination rates, leading to disruptions of the food chain and the overall decline of aquatic and terrestrial ecosystem health.

Geopolymer-based radiative cooling coating: Tailoring surface hydrophobic properties while retaining optical characteristics

The longevity of geopolymer-based radiative cooling coatings is questionable due to their hydrophilic nature. This study used four hydrophobic agents - sodium methyl silicate (SMS), polydimethylsiloxane (PDMS), polytetrafluoroethylene (PTFE), and triethoxyoctylsilane (TEOS) - to modify the surface hydrophobicity of geopolymer while maintaining its optical properties. The optimal agent contents were determined by optical performance and water contact angle: 5 % for SMS, 10 % for 50 cP viscosity PDMS, and a single-layer thickness for PTFE and TEOS (60 °C). The agents' working mechanisms were analyzed using FTIR and XRD characterization: SMS forms a hydrophobic alkylsilanol layer by reacting with the geopolymer's silanol group; PDMS lowers the geopolymer's surface energy with its hydrophobic methyl groups; PTFE's low electric polarizability is due to its fluorine content; and TEOS replaces the geopolymer surface's hydroxyl groups with hydrophobic octyl groups. The long-term durability of these modified coatings was evaluated through outdoor exposure tests, resulting in total solar reflectance losses of 0.74 %, 1.9 %, 3.9 %, and 0.05 % respectively. A slight reduction in the water contact angle confirmed their enduring hydrophobic characteristics. These modification methods open up possibilities for the practical use of hydrophobic geopolymer radiative cooling coatings.

Vulnerability Assessment of a Highly Populated Megacity to Ambient Thermal Stress

The urban ambient environment is directly responsible for the health conditions of millions of people. Comfortable living space is a significant aspect that urban policymakers need to address for sustainable planning. There is still a notable lack of studies that link the spatial profile of urban climate with city-specific built-up settings while assessing the vulnerability of the city population. Geospatial approaches can be beneficial in evaluating patterns of thermal discomfort and strategizing its mitigation. This study attempts to provide a thorough remote sensing framework to analyze the summer magnitude of thermal discomfort for a city in a tropical hot and humid climate. Spatial profiles of dry bulb temperature, wet bulb temperature and relative humidity were prepared for this purpose. A simultaneous assessment of various discomfort indices indicated the presence of moderate to strong heat stress to a vast extent within the study area. The central business district (CBD) of the city indicated a ‘danger’ level of heat disorder for outdoor exposure cases. Nearly 0.69 million people were vulnerable to a moderate threat from humid heat stress, and around 0.21 million citizens faced strong heat stress. Combing city morphology in the study showed that mid-rise buildings had the maximum contribution in terms of thermal discomfort. City areas with built-up cover of more than 68%, along with building height between 5.8 m and 9.3 m, created the worst outdoor discomfort situations. Better land management prospects were also investigated through a multicriteria approach using morphological settlement zones, wind direction, pavement watering, building regulations and future landscaping plans. East–west-aligned road segments of a total 38.44 km length were delineated for water spray cooling and greener pavements. This study is likely to provide solutions for enhancing ambient urban health.

Insights into cork weathering regarding colour, chemical and cellular changes in view of outdoor applications.

A comprehensive analysis of outdoor weathering and soil burial of cork during 1-year experiments was carried out with measurements of CIELAB color parameters, cellular observations by scanning electron microscopy, and surface chemical features analysed by ATR-FTIR and wet chemical analysis. Cork applied in outdoor conditions above and below ground retained its physical structure and integrity without signs of deterioration or fracturing. The cellular structure was maintained with some small changes at the one-cell layer at the surface, featuring cellular expansion and minute cell wall fractures. Surface color and chemistry showed distinct results for outdoor exposure and soil burial. The weathered cork surfaces acquired a lighter color while the soil buried cork surfaces became darker. With outdoor weathering, the cork polar solubles increased (13.0% vs. 7.6% o.d. mass) while a substantial decrease of lignin occurred (about 28% of the original lignin was removed) leading to a suberin-enriched cork surface. The chemical impact on lignin is therefore responsible for the surface change towards lighter colors. Soil-burial induced hydrolysis of ester bonds of suberin and xylan, and the lignin-enriched cork surface displayed a dark brown color. FTIR and wet chemical results were consistent. Overall cork showed a considerable structural and physical stability that allows its application in outdoor conditions, namely for building façades or other surfacing applications. Architects and designers should take into account the color dynamics of the cork surfaces.

EAACI guidelines on environmental science for allergy and asthma: The impact of short-term exposure to outdoor air pollutants on asthma-related outcomes and recommendations for mitigation measures.

The EAACI Guidelines on the impact of short-term exposure to outdoor pollutants on asthma-related outcomes provide recommendations for prevention, patient care and mitigation in a framework supporting rational decisions for healthcare professionals and patients to individualize and improve asthma management and for policymakers and regulators as an evidence-informed reference to help setting legally binding standards and goals for outdoor air quality at international, national and local levels. The Guideline was developed using the GRADE approach and evaluated outdoor pollutants referenced in the current Air Quality Guideline of the World Health Organization as single or mixed pollutants and outdoor pesticides. Short-term exposure to all pollutants evaluated increases the risk of asthma-related adverse outcomes, especially hospital admissions and emergency department visits (moderate certainty of evidence at specific lag days). There is limited evidence for the impact of traffic-related air pollution and outdoor pesticides exposure as well as for the interventions to reduce emissions. Due to the quality of evidence, conditional recommendations were formulated for all pollutants and for the interventions reducing outdoor air pollution. Asthma management counselled by the current EAACI guidelines can improve asthma-related outcomes but global measures for clean air are needed to achieve significant impact.

Short-term passive greenspace exposures have little effect on nasal microbiomes: A cross-over exposure study of a Māori cohort

Indigenous health interventions have emerged in New Zealand aimed at increasing people's interactions with and exposure to macro and microbial diversity. Urban greenspaces provide opportunities for people to gain such exposures. However, the dynamics and pathways of microbial transfer from natural environments onto a person remain poorly understood. Here, we analysed bacterial 16S rRNA amplicons in air samples (n = 7) and pre- and post-exposure nasal samples (n = 238) from 35 participants who had 30-min exposures in an outdoor park. The participants were organised into two groups: over eight days each group had two outdoor park exposures and two indoor office exposures, with a cross-over study design and washout days between exposure days. We investigated the effects of participant group, location (outdoor park vs. indoor office), and exposures (pre vs. post) on the nasal bacterial community composition and three key suspected health-associated bacterial indicators (alpha diversity, generic diversity of Gammaproteobacteria, and read abundances of butyrate-producing bacteria). The participants had distinct nasal bacterial communities, but these communities did not display notable shifts in composition following exposures. The community composition and key health bacterial indicators were stable throughout the trial period, with no clear or consistent effects of group, location, or exposure. We conclude that 30-min exposure periods to urban greenspaces are unlikely to create notable changes in the nasal microbiome of visitors, which contrasts with previous research. Our results suggest that longer exposures or activities that involves closer interaction with microbial rich ecological components (e.g., soil) are required for greenspace exposures to result in noteworthy changes in the nasal microbiome.

Research of antiaging behavior of a new sealing coating for color painting cultural relics

PurposeThe color painting of ancient buildings has high historical and artistic value but is prone to aging due to long-term outdoor exposure. The purpose of this study is to develop a new type of sealing coating to mitigate the impact of ultraviolet (UV) light on color painting.Design/methodology/approachThe new coating was subjected to a 500-h UV-aging test. Compared with the existing acrylic resin Primal AC33, the UV aging behavior of the new coating, such as color difference and gloss, was studied with aging time. The Fourier infrared spectra of the coatings were analyzed after the UV-aging test.FindingsCompared with AC33, the antiaging performance of SF8 was substantially improved. SF8 has a lower color difference value and better light retention and hydrophobicity. The Fourier transform infrared spectroscopy results showed that the C-F bond and Si-O bonds in the resin of the optimized sealing coating protected the main chain C-C structure from degradation during the aging process; thus, the resin maintained good stability. The hindered amine light stabilizer TN292 added to the coating inhibited the antiaging process by trapping active free radicals.Originality/valueTo address the problem of UV aging of oil-decorated colored paintings, a new type of sealing coating with excellent antiaging properties was developed, laying the foundation for its demonstration application on the surface of ancient buildings.

Living in Western Australia induces some physiological adaptations of seasonal acclimatisation in the surgical burns team

ABSTRACT Seasonal acclimatization is known to result in adaptations that can improve heat tolerance. Staff who operate on burn injuries are exposed to thermally stressful conditions and seasonal acclimatization may improve their thermoeffector responses during surgery. Therefore, the aim of this study was to assess the physiological and perceptual responses of staff who operate on burn injuries during summer and winter, to determine whether they become acclimatized to the heated operating theater. Eight staff members had physiological and perceptual responses compared during burn surgeries conducted in thermoneutral (CON: 24.1 ± 1.2°C, 45 ± 7% relative humidity [RH]) and heated (HOT: 31.3 ± 1.6°C, 44 ± 7% RH) operating theaters, in summer and winter. Physiological parameters that were assessed included core temperature, heart rate, total sweat loss, sweat rate, and urinary specific gravity. Perceptual responses included ratings of thermal sensation and comfort. In summer, CON compared to winter CON, baseline (85 ± 15 bpm VS 94 ± 18 bpm), mean (84 ± 16 bpm VS 93 ± 18 bpm), and peak HR (94 ± 17 bpm VS 105 ± 19 bpm) were lower (p < 0.05), whereas core temperature was not different between seasons in either condition (p > 0.05). In HOT, ratings of discomfort were higher in summer (15 ± 3) than winter (13 ± 3; p > 0.05), but ratings of thermal sensation and sweat rate were similar between seasons (p > 0.05). The surgical team in burns in Western Australia can obtain some of the physiological adaptations that result from seasonal acclimatization, but not all. That is most likely due to a lower than required amount of outdoor heat exposure in summer, to induce all physiological and perceptual adaptations.

Radiological hazards assessment of building materials used in Swakopmund, Namibia

A Canberra coaxial High Purity Germanium (HPGe) gamma-ray spectrometry detector was used to measure activity concentrations of radionuclides in commonly used building materials in Swakopmund, Namibia. The activity concentrations in, Bq.kg−1, for 226Ra, 232Th and 40K in all sample groups of building materials (cement, sand, cement bricks and roof tiles) were found to be in the range of 18.002–499.266, 14.069–132.508 and 162.794–1747.260, respectively. The average activity concentration of 40K was found to be two times higher than the critical level of 500 Bq.kg−1 in sand, cement bricks, clay bricks and roof tiles. The measured activity concentrations were used to estimate average dose rates and radiological hazard parameters. The absorbed dose rate (D) both due to indoor and outdoor exposure was higher than the international acceptable safe limits in all sample groups while the annual effective dose equivalent (AEDE) due to indoor exposure was higher in sand, cement bricks and clay brick samples. AEDE due to outdoor exposure was within acceptable safe limits for all sample groups. Radium equivalent (Raeq), external hazard (Hex) and gamma (Iγ) hazard indices were found to be higher than the acceptable safe limit only in clay bricks samples. The internal hazard (Hin) index was only higher than the acceptable safe limit in cement and clay bricks while the alpha (Iα) index was higher in sand, cement bricks and clay bricks. The Excess Lifetime Cancer Risk (ELCR) exceeded the acceptable safe limits in all sample groups. Our study showed that most of the computed radiological parameters were significantly higher than prescribed safe limits in most of the samples and therefore may pose a health risk to the inhabitants of Swakopmund.

Assessing school children's personal exposure to PM2.5 in Suva, Fiji

Globally, there is little information on children's personal exposure to particle pollution in developing countries, and hardly any in the Pacific Island Countries. This study was conducted with school children in Suva, Fiji, with the aim of assisting to fill this gap in knowledge. The participants included eighty-four children ranging from 10 to 15 years of age from five schools and two communities, defined as Group A and Group B, respectively. Each child was fitted with a KOALA air quality monitor which measured PM2.5 and carbon monoxide (CO) concentrations in real time over 24 h. Time activity diaries (TAD) and questionnaires were used by the students to record the start and end times of each activity in the different microenvironments occupied. For both groups, the PM2.5 concentration averaged over all children showed three distinct peaks in the morning, midday and in the evening. Several CO peaks were formed at different times of the day. The 24-h average CO concentrations for Group A and Group B students were 0.35 mg/m3 and 0.43 mg/m3, respectively. Time spent in the bedroom showed the highest average exposure (94.3 μg/m3, 301.1 μg/m3) and exposure intensity (5.8, 14.3), with the indoor exposure at home being significantly higher than the outdoor exposure for both groups. Based on the information obtained from the time activity diaries, questionnaires and follow-up interviews, the sources of these particles were most probably from cooking, smoking, burning of mosquito repellent coils, resuspension of dust in the classroom.Although this study could not apportion the specific contributions of emissions from cooking, cigarette smoke and mosquito coils, it may be concluded that these are significant sources for children's exposure and should be controlled.

Air pollution and serious bleeding events in high-risk older adults

ImportanceDespite biological plausibility, very few epidemiologic studies have investigated the risks of clinically significant bleeding events due to particulate air pollution. ObjectiveTo measure the independent and synergistic effects of PM2.5 exposure and anticoagulant use on serious bleeding events. DesignRetrospective cohort study (2008–2016). SettingNationwide Medicare population. ParticipantsA 50% random sample of Medicare Part D-eligible Fee-for-Service beneficiaries at high risk for cardiovascular and thromboembolic events. ExposuresFine particulate matter (PM2.5) and anticoagulant drugs (apixaban, dabigatran, edoxaban, rivaroxaban, or warfarin). Main outcomes and measuresThe outcomes were acute hospitalizations for gastrointestinal bleeding, intracranial bleeding, or epistaxis. Hazard ratios and 95% CIs for PM2.5 exposure were estimated by fitting inverse probability weighted marginal structural Cox proportional hazards models. The relative excess risk due to interaction was used to assess additive-scale interaction between PM2.5 exposure and anticoagulant use. ResultsThe study cohort included 1.86 million high-risk older adults (mean age 77, 60% male, 87% White, 8% Black, 30% anticoagulant users, mean PM2.5 exposure 8.81 μg/m3). A 10 μg/m3 increase in PM2.5 was associated with a 48% (95% CI: 45%–52%), 58% (95% CI: 49%–68%) and 55% (95% CI: 37%–76%) increased risk of gastrointestinal bleeding, intracranial bleeding, and epistaxis, respectively. Significant additive interaction between PM2.5 exposure and anticoagulant use was observed for gastrointestinal and intracranial bleeding. ConclusionsAmong older adults at high risk for cardiovascular and thromboembolic events, increasing PM2.5 exposure was significantly associated with increased risk of gastrointestinal bleeding, intracranial bleeding, and epistaxis. In addition, PM2.5 exposure and anticoagulant use may act together to increase risks of severe gastrointestinal and intracranial bleeding. Thus, clinicians may recommend that high-risk individuals limit their outdoor air pollution exposure during periods of increased PM2.5 concentrations. Our findings may inform environmental policies to protect the health of vulnerable populations.

Fabrication of high-performance lens arrays for micro-concentrator photovoltaics using ultraviolet imprinting

Micro-concentrator photovoltaics (micro-CPV) is a cutting-edge CPV approach aimed at increasing the efficiency and reducing the cost and carbon footprint of solar electricity by downscaling concentrator solar cells and optics. The reduced size of micro-CPV provides several advantages over conventional CPV, including shorter optical paths and lower temperature and resistive losses in the cell, resulting in higher electrical efficiencies. This may increase the energy yield per area compared to conventional CPV or silicon modules. Cost reduction is achieved through material savings and the use of continuous manufacturing methods enabled by the tiny size of cells and optics, such as roll-to-roll (R2R) and roll-to-plate (R2P) ultraviolet (UV) imprinting for optics production. However, adapting these processes to large-area arrays of Fresnel micro-lenses with no wasted areas and high efficiency remains a challenge. In this study, we present a comprehensive methodology for the development of micro-CPV optics with full area coverage—from design and mastering to up-scaling, tooling, and replication. The methodology involves designing a non-rotationally symmetric elementary insert tailored to ultraviolet imprinting. Crucially, multiple inserts are originated via precision machining and recombined to form a single array master mold without wasted areas. The master is then replicated into a flexible working stamp for UV imprinting of Fresnel lens arrays, utilizing different UV curable materials. The functional characterization of the lenses demonstrates an optical efficiency of 80% at 178X under collimated white light, representing the highest effective concentration achieved using UV-imprinted Fresnel lenses. Furthermore, initial reliability tests confirm the absence of degradation during thermal cycling or outdoor exposure. This methodology paves the way for continuous high-throughput manufacturing of micro-lens arrays using R2R or R2P methods, presenting a significant step forward in micro-CPV.

Heat exposure as a cause of injury and illness in mine industry workers.

The objective of this study was to explore the association between ambient temperature and injuries and illnesses experienced by mine industry workers. Eleven years of de-identified data from a mine industry company in Australia was explored in regards to injuries and illnesses occurring due to outdoor exposure. Each case was filtered for reported symptoms, and meteorological data to match the location of the mine site and date reported were sourced. Of the 18 931 injuries and illnesses observed over the 11-year period, 151 cases of heat-related illness due to outdoor exposure were reported. Twenty-five conditions/symptoms of heat-illness were found, with the most prevalent being dehydration (n = 81), followed by heat rash (n = 40), dizziness (n = 24), and headache (n = 23). The mean number of symptoms reported by each worker was 2 ± 1. There was a positive correlation between ambient temperature and injuries/illnesses (r2 = 0.89, P < 0.001), where, as temperature increased so did the number of reported heat-related illnesses. Underreporting of heat-related illness and injury in the mining industry is likely, which is a risk to the health and wellbeing of employees. Workers require industry specific training about the severity of heat stress and the associated prevention strategies.

Hygrothermal behaviour of external thermal insulation composite systems (ETICS) to withstand biological colonisation

ETICS are multilayer building solutions applied to the building external walls to provide an improved thermal performance to the building envelope. However, several questions have been raised concerning the durability of ETICS, namely related to biological colonisation phenomena. Considering the high susceptibility of ETICS to bio-colonisation, the following research questions arise: (i) what is the impact of surface temperature (ST) and surface relative humidity (SRH) fluctuation on mould growth in ETICS facades? (ii) is it possible to predict mould growth on ETICS under fluctuating conditions considering favourable and unfavourable growth conditions? This study aims to investigate the influence of the hygrothermal behaviour of five different ETICS (with thermal mortars and insulation boards) on mould growth. ETICS were exposed for one year at an urban site in Lisbon, Portugal, facing North, during which the ST and the SRH were monitored. Concurrently, numerical simulations were performed to evaluate the hygrothermal behaviour of the ETICS. Three theoretical indices were applied, using numerically and experimentally obtained values of ST and SRH as input to provide an indication of the risk of mould growth. The results were complemented and validated by assessing the bio-colonisation, water performance and aesthetic properties of the ETICS. Index 1 (percentage of time with SRH ≥80%) indicated similar potential of mould growth for all systems. Both index 2 (percentage of time with SRH = 100%) and index 3 (percentage of time with SRH ≥80% and 15 °C ≤ ST ≤ 30 °C) indicated a higher potential of mould growth for the lime-based ETICS and a lower potential for the acrylic-based ETICS with an EPS-based mortar. Moreover, the lime-based system obtained the highest rate of mould growth after one year of outdoor exposure. Therefore, results suggested that indices 2 and 3 are in agreement with field observations and thus can provide an indication on mould growth for the analysed ETICS. Results also showed that an increase of capillary water absorption after ageing to levels higher than 1 kg/m2 after 24 h in direct contact with water can favour mould growth. Thus, the combination of unfavourable microclimatic conditions (SRH <80%; ST < 15 °C or ST > 30 °C) and surface hydrophobicity are fundamental to avoid mould growth on ETICS, regardless of the incorporation of biocide in the finishing coat composition.

Evaluation of Hydrothermally Treated Wood Fibre Performance in Cement Mortars

Biofibres’ wide application in mortar enhancement has thus far been restricted by factors related to their chemical composition and hygroscopic nature. Their hydrophilic behaviour increases the water demand of mortar mixtures and diminishes their affinity to the matrix, while further moisture-related fibre degradation issues may arise. Additionally, natural fibres seem to be susceptible to degradation caused by exposure to alkaline environmental conditions such as those experienced by cement mortars, restricting their utilisation in the construction industry. Therefore, the current study investigates the potential of fibre modification through treatments that would permanently alter their structure and chemical composition to improve their performance. In this study, wood fibres of black pine and beech species were exposed to mild thermal treatment (140 °C 2 h, under a steam atmosphere), characterised in terms of the physical and chemical properties and incorporated in cement mortars, applying the proportion of 1.5% v/v in the mortar, in order to assess their performance as reinforcement material. The mortars’ workability (at a fresh state) was examined, as well as other physical, hygroscopic, thermal, and mechanical characteristics of the mortars at the ages of 28, 90 and 365 days and weathering performance, by subjecting them to different artificial ageing environments (freeze–thaw cycles or outdoor exposure). The results revealed the beneficial role of the treated fibres in dimensional stability, flexural strength, thermal insulation properties and capillary absorption of the mortar specimens, especially during the ageing process, with the black pine fibres showing the greatest improvement. The hydrothermally treated wood fibres seem to help maintain the integrity of cement mortars under all ageing conditions, proving that they could provide low-cost and eco-friendly mortar enhancement pathways.

Understanding sensescapes and restorative effects of nature-based destinations: a mixed-methods approach

Nature is restorative for people suffering from stress and mental fatigues. While studies advocate to investigate restorative effects of nature from a multi-sensory perspective, this study also reveals mechanisms of how various aspects of sensescapes differentially influence visitors’ restorative experience in nature, especially with visitors’ different degrees of reduced outdoor exposure during the Covid-19 pandemic. Using a mixed-methods approach that combined survey questionnaire, in-depth interviews, real-time GPS loggers, portable sound level sensors, and eye-tracking technique, this study revealed that while visualscape, smellscape and haptiscape prominently influenced attention restoration, soundscape indirectly influenced attention restoration through positive emotions. Visitors with higher levels of reduction in exposure to outdoors due to the pandemic were more likely to restore themselves through multi-sensory engagement with nature. These findings advance the understanding of restorative benefits of nature by considering the spatio-temporal qualities of human-environment interactions through different senses and in the context of the pandemic.

Effect of extended outdoor exposure on surface quality and mechanical properties of Malaysian hardwood species

Tropical hardwoods, often used as outdoor wood products, are frequently exposed to the hot and humid conditions in Malaysia. This has led to many studies attempting to develop suitable coatings and establishing maintenance cycles so that product service life can be extended. The objective of this study was to evaluate the surface quality and mechanical properties of both uncoated and coated three Malaysian hardwood species, namely dark red meranti (Shorea spp.), keruing (Dipterocarpus spp.) and keranji (Dialium spp.) after exposure to outdoor condition at different time spans. Surface quality of uncoated and coated with exterior transparent alkyd finished of the samples was evaluated visually as well as employing a profilometer-type equipment. Bending characteristics of outdoor exposed samples were also tested. The results showed that the surface of all coated samples degraded after 48 months of exposure. In addition, after 48 months of outdoor exposure, the modulus of rupture (MOR) values for dark red meranti, keruing and keranji decreased by more than 15% while the modulus of elasticity (MOE) values decreased by approximately 20% for both uncoated and coated samples. Generally, refinishing and maintenance should be performed within 2 years, and the cost of the maintenance should be calculated to ensure that the condition of the wood remains suitable for use as a building material in Malaysia’s climate conditions.