Outdoor Environmental Conditions Research Articles

Performance of air source heat pump units with different wettability evaporators

The air source heat pumps (ASHPs) for winter heating have the advantages of high efficiency and environmental protection. However, the outside evaporator’s frosting negatively impacts the performance of heat pump systems in low-temperature and high-humidity environments. In this paper, we fabricated the superhydrophobic evaporator and mounted it on a commercial ASHP unit, expanding the use of superhydrophobic surface modification technology from heat exchangers in the laboratory to the ASHP units. Then we investigated the operating characteristics of two ASHP units equipped with hydrophilic and superhydrophobic evaporators respectively under six distinct outdoor and indoor environmental conditions experimentally. In the non-frosting conditions, film condensation formed on the surface of the hydrophilic evaporator and the evaporation temperature decreased with the formation of water film, resulting in a decrease in heat production and COP. In the frosting conditions, the time of forming the frost layers with the same thickness on the superhydrophobic surface was more than 4 times longer than that on the hydrophilic surface. The COP of the superhydrophobic evaporator unit was improved by 2.9% to 8.2% under the non-frosting conditions, by 11.5% under the continuous heating conditions and by 14.28% when the hydrophilic unit performed two defrosting cycles, respectively. During the period in which the hydrophilic evaporator unit completed two frosting/defrosting cycles, the energy loss coefficient caused by the defrosting process was 31.65% compared to the superhydrophobic evaporator unit. This work extended the experimental method of superhydrophobic heat exchanger, contributing to the application of superhydrophobic finned-tube evaporators in ASHP units.

A non-local based microcrack segmentation model optimized for effective high resolution and low-power devices

Concrete is notable for its strength, durability, and versatility, making it a fundamental material in construction. Nevertheless, microcracks occur in concrete structures due to various factors, and the size of these cracks gradually widens over time, which can lead to spalling. Furthermore, the advent of climate change accelerates concrete degradation, posing significant challenges to structural maintenance. Recently, deep learning-based computer vision techniques, especially convolutional neural networks, have shown promising results in detecting and segmenting cracks in concrete walls. In this study, we propose a two-step training strategy for a microcrack segmentation model optimized for high resolution and low-power devices. The first step is to develop a segmentation model that can detect microcracks through high-resolution images. This strategy includes generating a high-quality CrackHQ dataset using super-resolution and a Transformer-based model training process named CegFormer. The second step involves converting the trained model to a lightweight version, increasing inference speed and making it operable on low-power devices. While performing lightweight, the model performance inevitably is degraded. We restored the degraded crack recognition performance by applying knowledge distillation. The experimental results of comparing baseline and CegFormer showed a 12.82% improvement in microcrack recognition performance. The detector optimized for use in actual fields improved recognition performance by up to 5.16% and reduced inference speed by 51.52%. The utilization of the two-step training strategy enabled the optical sensors to accurately detect microcracks even from far fields. Future work will focus on developing crack detectors that take into account both indoor and outdoor environmental conditions, as well as different texture of surface materials, for application in building inspection.

Role of Urban Trees in Enhancing the Thermal Comfort of Rapidly Urbanizing Cities: An Analysis of Tropical Asian Tree Species Based on Physiological Equivalent Temperature (PET)

AbstractBackgroundThermal comfort significantly influences well-being, productivity, and living conditions in outdoor environments, particularly in rapidly urbanizing, warm, humid tropical climates. This study assessed the influence of 5 five common urban tree species (Cassia fistula,Tectona grandis,Plumeria obtusa,Mangifera indica, andTerminalia catappa) on outdoor thermal comfort, using the physiological equivalent temperature (PET) index in Colombo, Sri Lanka, as a case study for a tropical humid city.MethodsField data collection encompassed measuring air and surface temperature, relative humidity, wind velocity, solar radiation, cloud cover, and sky view factor under tree canopies and adjacent exposed areas. The RayMan model was employed to estimate PET in both areas.ResultsOur findings indicated that PET was consistently higher in exposed areas compared to under the tree canopy, with an average difference of 5.61 °C. Among tree parameters, sky view factor (SVF) demonstrated the most significant correlation with thermal comfort, followed by crown diameter and tree height. Furthermore, notable variations in thermal comfort were observed among tree species, withTerminalia catappaoutperformingPlumeria obtusa, particularly on sunny days.ConclusionRegression analysis highlighted the importance of integrating trees with large crowns and low SVF to create thermally comfortable outdoor spaces. Consequently,Terminalia catappaemerged as the most suitable tree species for enhancing thermal comfort in Colombo’s outdoor urban areas out of the 5 selected species. These insights will aid in selecting appropriate tree species and parameters, fostering improved outdoor thermal comfort in tropical humid cities, and facilitating sustainable urban planning and design strategies.

Application of the Heat Flow Meter Method and Extended Average Method to Improve the Accuracy of In Situ U-Value Estimations of Highly Insulated Building Walls

In the context of remodeling old buildings, enhancing insulation performance in the exterior skin necessitates an accurate assessment of a wall’s thermal performance. The conventional method for determining the thermal transmittance (U-value) of a wall is the heat flow meter (HFM) as outlined in the ISO 9869-1. However, this measurement is susceptible to errors influenced by indoor and outdoor environmental conditions and the wall’s material composition. This study evaluates the U-value of an internally insulated wall, specifically constructed for this purpose, utilizing both the average and dynamic methodologies of an HFM. Furthermore, it introduces a novel estimation method: the extended average method (EXAM). The effectiveness of this proposed method is ascertained by comparing the accuracy and convergence of the U-value estimations with those derived from existing methodologies. Additionally, the study explores the limitations of the HFM by analyzing the heat flow traversing the interior of a wall. The findings revealed that the EXAM method enhanced the precision of U-value estimation in all scenarios. Particularly, in walls with superior insulation, the HFM tended to underestimate the heat flow observed indoors, leading to negative errors. The EXAM method, incorporating considerations of both insulation and structural materials, offers an accurate in situ measurement of the U-value relative to the HFM.

Shear performance and durability of adhesively bonded spruce wood-concrete composite joints: Effects of indoor and outdoor environmental conditions, mechanical load, and their coupled effect

A long-term study was conducted on double-lap spruce wood-concrete joints to investigate their shear strength and stiffness over a 12-month period. These joints were manufactured using both wet and dry processes, each incorporating two adhesive types for bonding the wood to the concrete: a brittle epoxy and a ductile polyurethane (PUR). The experimental design exposed the joints to three specific long-term environments: (1) outdoor exposure, (2) indoor conditions with applied load, and (3) outdoor conditions with applied load. The wood-concrete joints exposed to outdoor conditions were subjected to destructive shear testing at intervals of 0 (serving as the reference sample), 2, 4, 6, and 12 months, respectively. For joints subjected to both indoor and outdoor conditions with shear loading, the shear deformation of joints was monitored continuously over the 12 months before performing the destructive tests. A gradual reduction in the shear stiffness and strength of dry joints (produced using the dry bond method) exposed to outdoor conditions was observed over a 12-month period, primarily due to bond failure at the concrete-adhesive interface. The wet joints exhibited no degradation in shear stiffness and strength across long-term conditions over the same period. The bond failure observed in dry joints was predominantly associated with stresses arising from dimensional changes in the wood. No degradation was found in the cross-linking density of the adhesive or in the concrete's compressive stiffness and strength.

Contrasting gut bacteriomes unveiled between wild Antheraea assamensis Helfer (Lepidoptera: Saturniidae) and domesticated Bombyx mori L. (Lepidoptera: Bombycidae) silkworms.

Insect gut microbiomes play a fundamental role in various aspects of insect physiology, including digestion, nutrient metabolism, detoxification, immunity, growth and development. The wild Muga silkworm,Antheraea assamensisHelfer holds significant economic importance, as it produces golden silk. In the current investigation, we deciphered its intricate gut bacteriome through high-throughput 16S rRNA amplicon sequencing. Further, to understand bacterial community dynamics among silkworms raised under outdoor environmental conditions, we compared its gut bacteriomes with those of the domesticated mulberry silkworm,Bombyx moriL. Most abundant bacterial phyla identified in the gut ofA. assamensiswere Proteobacteria (78.1%), Bacteroidetes (8.0%) and Firmicutes (6.6%), whereas the most-abundant phyla inB. moriwere Firmicutes (49-86%) and Actinobacteria (10-36%). Further, Gammaproteobacteria (57.1%), Alphaproteobacteria (10.47%) and Betaproteobacteria (8.28%) were the dominant bacterial classes found in the gut ofA. assamensis. The predominant bacterial families inA. assamensisgut wereEnterobacteriaceae(27.7%),Comamonadaceae(9.13%),Pseudomonadaceae(9.08%)Flavobacteriaceae(7.59%)Moraxellaceae(7.38%)Alteromonadaceae(6.8%) andEnterococcaceae(4.46%). InB. mori, the most-abundant bacterial families were Peptostreptococcaceae, Enterococcaceae, Lactobacillaceae and Bifidobacteriaceae, though all showed great variability among the samples. The core gut bacteriome ofA. assamensisconsisted ofPseudomonas, Acinetobacter, Variovorax, Myroides, Alteromonas, Enterobacter, Enterococcus, Sphingomonas, Brevundimonas, Oleispira, Comamonas, Oleibacter Vagococcus, Aminobacter, Marinobacter, Cupriavidus, Aeromonas, andBacillus.Comparative gut bacteriome analysis revealed a more complex gut bacterial diversity in wildA. assamensissilkworms than in domesticatedB. morisilkworms, which contained a relatively simple gut bacteriome as estimated by OTU richness. Predictive functional profiling of the gut bacteriome suggested that gut bacteria inA. assamensiswere associated with a wide range of physiological, nutritional, and metabolic functions, including biodegradation of xenobiotics, lipid, amino acid, carbohydrate metabolism, and biosynthesis of secondary metabolites and amino acids. These results showed great differences in the composition and diversity of gut bacteria between the two silkworm species. Both insect species harbored core bacterial taxa commonly found in insects, but the relative abundance and composition of these taxa varied markedly.

Mechanical and Thermal Properties of Aged Helmet Outer Shells Made of Acrylonitrile-Butadiene-Styrene

Acrylonitrile-butadiene-styrene (ABS) material is widely used as a protective rigid shell and impact absorber in bike helmets, providing vital protection against head injuries under specific working conditions. However, ABS aging in helmets could affect the safety factor of helmets and shorten the service life. Exploring the transformation during aging process for real assembled helmets made of ABS out shells is crucial for the investigation and fabrication of high performance helmets. Herein, the effect of long-term aging on the physical properties of practical helmets made of ABS outer shells has been discussed systematically. Four different types of helmets were subjected to different aging conditions, i.e., outdoor environment, ultraviolet exposure, hot air, and humid-heat conditions. The impact property and stiffness tests were carried out as a function of aging time and aging conditions. The measured helmets were capable of meeting engineering tolerances when aged under outdoor, ultraviolet, and hot air conditions, and could deliver competitive mechanical performance to their pristine helmets. Yet, after aging under humid-heat for 800 h, the helmets showed an obvious decrease in impact strength, gloss, and stiffness. The influence of different aging conditions was further investigated by thermal and spectral characterizations. The study might provide some valuable advice for helmet performance evaluation.

Seasonal dynamics of the standard test species Lemna sp. in outdoor microcosms.

Lemna L. sp. is a free-floating aquatic macrophyte that plays a key role as a standard test species in aquatic risk assessment for herbicides and other contaminants. Population modeling can be used to extrapolate from laboratory to field conditions. However, there are insufficient data on longer-term seasonal dynamics of this species to evaluate such models. Therefore, several long-term growth experiments were conducted in outdoor microcosms (surface area 0.174 m2). Monitoring parameters included biomass, frond numbers, water parameters, and weather data. Three different datasets were generated: frond numbers and biomass from weekly to monthly destructively sampled microcosms; a year-round dataset of frond numbers from five continuously monitored microcosms; and seasonal growth rates without the effect of density dependence over 1-2 weeks in freshly inoculated microcosms. Lemna sp. reached a maximum of approximately 500 000 fronds m-2 and 190 g dry weight m-2. During the first winter, the microcosms were covered by ice for approximately four weeks, and Lemna sp. populations collapsed. The second winter was warmer, without any ice cover, and Lemna sp. populations maintained high abundance throughout the winter. Dry weight per frond was not constant throughout the year but was highest in autumn and winter. Growth rates without density dependence under outdoor environmental conditions reached 0.29 day-1 for frond number, 0.43 day-1 for fresh weight, and 0.39 day-1 for dry weight. In linear regressions, these growth rates were best explained by water temperature. For the populations continuously monitored throughout a year, the nitrogen-to-phosphorus ratio best explained the growth rate of frond numbers. This study yielded a relevant dataset for testing and refining Lemna population models used in chemical risk assessment as well as for managing ecosystems and combating the effects of eutrophication. Integr Environ Assess Manag 2024;20:1625-1638. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Accelerated Weathering Testing (AWT) and Bacterial Biodegradation Effects on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/Rapeseed Microfiber Biocomposites Properties.

In the context of sustainable materials, this study explores the effects of accelerated weathering testing and bacterial biodegradation on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/rapeseed microfiber biocomposites. Accelerated weathering, simulating outdoor environmental conditions, and bacterial biodegradation, representing natural degradation processes in soil, were employed to investigate the changes in the mechanical, thermal and morphological properties of these materials during its post-production life cycle. Attention was paid to the assessment of the change of structural, mechanical and calorimetric properties of alkali and N-methylmorpholine N-oxide (NMMO)-treated rapeseed microfiber (RS)-reinforced plasticized PHBV composites before and after accelerated weathering. Results revealed that accelerated weathering led to an increase in stiffness, but a reduction in tensile strength and elongation at break, of the investigated PHBV biocomposites. Additionally, during accelerated weathering, the crystallinity of PHBV biocomposites increased, especially in the presence of RS, due to both the hydrolytic degradation of the polymer matrix and the nucleating effect of the filler. It has been observed that an increase in PHBV crystallinity, determined by DSC measurements, correlates with the intensity ratio I1225/1180 obtained from FTIR-ATR data. The treatment of RS microfibers increased the biodegradation capability of the developed PHBV composites, especially in the case of chemically untreated RS. All the developed PHBV composites demonstrated faster biodegradation in comparison to neat PHBV matrix.

The Development of Various Methods for Object Tracking and Classification in Thermal Videos

Nowadays, thermal cameras play a major role because of its temperature-based photography in many applications such as video surveillance, monitoring electronics/electrical machines, forest monitoring, monitoring babies/adult patients, and suspicious object detection. Tracking pedestrians in thermal video is a major task for such applications. Thermal cameras usually create images based on temperature emitted by the object only and not on the lighting conditions and outdoor environment conditions. But still thermal images have constraints like no texture or colour information, more number of dead pixels, low resolution, and noticeable visual colour patterns in case of any temperature variations. So the challenge in tracking pedestrians in thermal videos is tracking objects/pedestrians throughout the video without an identity switch by overcoming these constraints which may mislead the tracking process. To overcome these constraints, the proposed system uses tri feature matrix (TFM) as an object descriptor which is used to uniquely identify and represent objects in thermal images. TFM is represented in more compact way as a triple matrix. It is a simple and accurate descriptor suitable for tracking objects in thermal video sequences without an identity switch. The proposed Pedestrian tracking system uses most of the advantages of thermal cameras by overcoming challenges in thermal videos effectively based on a novel descriptor TFM. The proposed system is evaluated with various data sets, and the results are analysed using true positive, true negative, false negative, false positive, accuracy, precision, recall, F-score, global identity mismatch (GMME) and track matching error (TME). The performance metrics such as accuracy, precision, recall, F-score, GMME and TME are computed as 99%, 100%, 99%, 99%, 2.3%, and 2.1%, respectively. From the observation, it is found that the performance of proposed TFM-based system is significantly improved. The experimental result shows that the proposed system achieved more accurate tracking compared to the conventional methods

A comprehensive review on reliability and degradation of PV modules based on failure modes and effect analysis

Abstract This review paper aims to evaluate the impact of defects on the reliability and degradation of photovoltaic (PV) modules during outdoor exposure. A comprehensive analysis of existing literature was conducted to identify the primary causes of degradation and failure modes in PV modules, with a particular focus on the effect of defects. Based on a risk priority number (RPN) analysis of previous studies, dust accumulation on the PV surface (severity = 9), module shading (severity = 8) and humidity (severity = 7) were found to be the most significant causes of degradation. Furthermore, the degree of performance and degradation of PV modules were analyzed based on the identified failure mechanisms and modes. The analysis revealed that the decrease in efficiency ranged from 0.2 to 3%. The dust accumulation reduced the module efficiency by 3%, while corrosion in the module decreased efficiency by 1.9%. These findings highlight the importance of addressing specific defects to maintain optimal PV module performance in outdoor conditions. This review paper provides valuable insights into the effect of defects on the performance of PV modules, and critical defects occur during outdoor exposure to PV modules which depend on the type of PV technology and outdoor environment conditions and are able to mitigate the further performance of PV modules. The present study will help manufacturers improve the design and maintenance strategies of PV systems.

Analysis of thermal discomfort associated with synoptic conditions in the city of Pelotas, southernmost region of Brazil.

Here, we evaluated the influence of outdoor environmental conditions (synoptic weather conditions) on human thermal discomfort in the five macro-regions of Pelotas city, located in the southernmost region of Brazil. To do this, meteorological sensors (HOBO MX2301A) were installed outside the residences to measure the air temperature, dew point temperature, and relative humidity between 18 January and 20 August 2019. Two well-established simplified biometeorological indices were examined seasonally: (i) humidex for the summer months and (ii) effective temperature as a function of wind for the autumn and winter months. Our findings showed seasonal differences related to human thermal discomfort and outdoor environmental conditions. The thermal discomfort was highest in the afternoons during the summer months and at night during the winter months. The seasonal variation in human thermal discomfort was highly associated with the meteorological conditions. In summer, the presence of the South Atlantic Subtropical Anticyclone (SASA) contributed to heat stress. The SASA combined with the continent's low humidity contributed to the perceived sensation of thermal discomfort. In the winter, thermal discomfort was associated with the decrease in air humidity caused by high atmospheric pressure systems, which led to a decrease in both air temperature and air moisture content. Our findings suggest that a better understanding of the complex interplay between outdoor environmental factors and human thermal comfort is needed in order to mitigate the negative effects of thermal discomfort.

Impact of hybrid nano PCM (paraffin wax with Al2O3 and ZnO nanoparticles) on photovoltaic thermal system: Energy, exergy, exergoeconomic and enviroeconomic analysis

Global renewable energy efforts place a significant preference on substantial solar photovoltaic (PV) systems. Photovoltaic thermal (PVT) systems are the upgraded version of PV modules that concurrently produce both electricity and heat. Hybrid nano-particles (2.0 wt % ZnO and 2.0 wt % Al2O3) into the phase change material (PCM) known as HNPCM system has been introduced in this current study for enhancing the electrical and thermal performance of the PVT system by improving the thermophysical properties of paraffin wax as used for passive cooling. Three PV systems were compared in terms of performance: a conventional PV system, a PVT system using paraffin wax as a PCM (PVT/PCM), and a PVT system with 2.0 wt % of Al2O3 and ZnO in PCM (PVT/HNPCM). Upon investigation, the PVT/HNPCM system under outdoor environmental condition shows that the inclusion of different nanoparticles in PCM led to improvements in thermal and overall efficiency of 17.32 % and 13.82 % compared to PVT/PCM, respectively. This results in increase of electrical efficiency of 34.84 % when compared to conventional PV panel and incremental peak exergy efficiency of 36.47 %. Besides, for PVT/HNPCM, cost of electricity production ($/kWh) is almost 16.67 % less than the conventional PV configuration and the payback time is about 2.1 years on the overall exergy basis. Additionally, PVT/HNPCM system exhibits the long-term life cycle conversion efficiency compared to conventional PV panel and maximum sustainability index of 1.21 has been also found. Finally, the conclusion can be drawn positively for PVT/HNPCM as the most effective system from the exergy efficiency, exergy cost, and CO2 avoidance rates point of view.

Highly Efficient and Reliable Organic Light–Emitting Diodes Enabled by a Multifunctional Hazy Substrate for Extreme Environments

AbstractAs transparent, flexible, and wearable organic electronics degrade under normal outdoor environmental conditions (e.g., water vapor, oxygen, and UV light) and extreme environments, including washing or rain, a customized encapsulation technology is required to improve device reliability. Herein, a simple process is presented for fabricating multifunctional hazy substrates (MFHSs) with excellent gas diffusion barrier (GDB), flexibility, UV reflectance, light scattering, and waterproof properties. First, a spiky polyethylene terephthalate (PET) surface is produced with 76.0% optical haze through ion‐beam treatment followed by the formation of a hydrophobic layer to achieve a waterproof effect (contact angle: 153.3°). Then, a multifunctional multibarrier film is fabricated based on a nano‐laminated distributed Bragg reflector and functional polymer on the functional PET substrate to serve as a GDB and UV filter. This multibarrier film has excellent mechanical and chemical stabilities, in addition to having a water vapor transmission rate of 10−6 g m−2 day−1 and UV transmittance of <3%. The so‐fabricated MFHS not only increases the device efficiency by 73% but also enables a highly flexible and environmentally stable organic light–emitting diode. The surface treatment and encapsulation technologies developed in this study are expected to increase the lifetime of organic devices and facilitate high outdoor usability.

European residential ventilation: Investigating the impact on health and energy demand

The fundamental goal of building ventilation is to provide indoor conditions conducive to occupant health with low energy use. However, given the dynamic interplay of indoor and outdoor environmental conditions, there is limited knowledge on benchmarking human health and energy performance in relation to different ventilation systems. We coupled outdoor air pollution and meteorological data from 9 European cities with building energy simulations to investigate the effect of residential ventilation on indoor air quality, Disability-Adjusted Life Years (DALYs), and energy demand. Examining five representative ventilation systems, each operating under three distinct ventilative cooling (VC) scenarios, our findings reveal that PM2.5 accounted for the majority of DALYs (∼94 %). Filtering outdoor air in accordance with the standards reduced DALYs on average by ∼37 %. In the presence of filtration, VC based on indoor-outdoor temperatures increased DALYs by ∼10 %. However, a more comprehensive VC control based on both indoor-outdoor temperatures and outdoor air pollution did not increase DALYs. Overall, demand-controlled mechanical ventilation with energy recovery, outdoor air filtration, and VC resulted in the lowest energy demand and DALYs. Our results suggest that considering both indoor and outdoor environmental parameters can improve the performance of residential ventilation in terms of health and energy.

Exploration of Microalgae-Activated Sludge Growth Performance in Lab-Scale Photobioreactors under Outdoor Environmental Conditions for Wastewater Biotreatment

Increasing the volume of untreated and inadequately treated municipal wastewater undermines the circular economy potential of wastewater resources, particularly in low-income regions. This present study focused on and evaluated the performance of native microalgae-activated sludge (MAS) growth for tertiary treatment of anaerobically digested wastewater from an up-flow anaerobic sludge blanket (UASB) in an outdoor lab-scale photobioreactor (2.2 L). Three conditions with distinct MAS inoculum concentrations alongside three controls were operated in batch mode for 5 days hydraulic retention time (HRT) at 11.5:12.5 photo-hours. The MAS inoculum concentration influenced the treatment outcome. The best performance was observed when the MAS concentration was 0.10/0.20 g L−1, and the cell density was 1.60 × 107 cells mL−1, total biomass productivity of 0.10 g TSS L−1 d−1, total phosphorus uptake of 85.1%, and total nitrogen uptake of 66.1%. Logarithmic removal (Log-Re) of bacterial pathogens (water quality indicators) showed Log-Re 3.4 for total coliforms (1.37 × 102 CFU 100 mL−1) and 4.7 for Escherichia coli (0.00 × 100 CFU 100 mL−1). The results revealed optimum remediation performance and nutrient recovery potential with appropriate inoculum concentration, in admiration to advancing the science of circular economy.

Geopolymer mortars for use in construction 3D printing: Effect of LSS, graphene oxide and nanoclay at different environmental conditions

The environmental impact of concrete 3D printing (C3DP) has become a concern due to its large cement consumption and over-exploitation of natural resources. This study investigates the viability of using geopolymer mixtures in C3DP prepared with fly ash (FA)/ground granulated blast furnace slag (GGBS) and underutilised aggregate as substitutes for ordinary Portland cement (OPC) and natural aggregate, respectively. This paper focuses on the rheological, mechanical, and shrinkage properties of FA/GGBS-based geopolymer mortar with lead smelter slag (LSS) as natural sand (NS) substitute and the impact of adding nanoclay (NC) and graphene oxide (GO), as thixotropy agents, on the yield stress development and viscosity recovery properties of the mixtures. The effect of various outdoor environmental conditions of 24 °C -50 %RH, 35 °C -90 %RH and 35 °C -50 %RH on pore water evaporation and 28-day drying shrinkage of 3D printable geopolymer mortar was studied, considering the effect of NS, LSS, NC and GO in free-formed and control conditions. LSS GO-modified mortars exhibited superior viscosity recovery capacity and yield stress evolution compared to their NC-modified counterparts. Moreover, using LSS instead of NS resulted in increased 28-day compressive strength under various environmental conditions, and LSS mortars exhibited lower drying shrinkage in both conventional casting and free-formed conditions. The findings of this paper will serve as a benchmark for further studies on the effect of different curing techniques (internal or external) on the hardened state dimensional stability of 3D printed products using alkali-activated binder systems to improve the structural integrity by controlling the water evaporation and drying shrinkage development.

A novel wind comfort evaluation method for different airflows by considering dynamic characteristics of wind direction and velocity

The dynamic velocity characteristics of wind have been studied over the past several decades. However, there was a lack of consideration for the incoming flow directions. Besides, the comfort assessment studies mainly focused on thermal comfort from the mechanism of heat transfer instead of wind comfort from the mechanism of tactile stimuli. This study carried out a mixed indoor and outdoor experiment. The indoor experiment was conducted with a room temperature of 29 °C and a relative humidity of 50%, which closely resembled the outdoor environmental conditions. Totally 17 healthy subjects dressed at 0.36 clo and being sedentary were exposed to five kinds of airflow during the experiment. According to the results, outdoor true natural wind was more preferred than directly supplied wind. This paper also proposed a novel wind comfort (WC) model by considering various air parameters. The model relied on tactile stimuli, which were the reflections of wind pressure fluctuations and could be affected by changes in velocity and direction of airflows. Based on these two dynamic characteristics, four wind perceptions, including wind intensity vote (WIV), velocity variation sense (VVS), direction variation sense (DVS) and overall enveloping sense (OES) were introduced and linearly regressed. The findings revealed that not only velocity but also the direction could affect the wind comfort evaluation. This paper will hopefully provide a better understanding of impacts of incoming flow directions on comfort and further rethink a novel route of dynamic wind environment imitation for future indoor environments.

Indoor Environmental Quality, Pupils’ Health, and Academic Performance—A Literature Review

Classrooms have more students per square meter than other buildings such as offices, making them more crowded. In addition, children respire more than adults and are in contact with one another more often. For appropriate student comfort, wellbeing, and health, including reducing the risk of transferring communicable diseases (for example, COVID-19) in the school setting, adequate ventilation and thermal comfort is recommended, along with regular cleaning, especially of high-contact surfaces. However, this may lead to increased energy usage, especially in mechanically ventilated schools. While natural ventilation conserves energy, its usage may be limited in temperate regions, especially during the cold seasons, as more energy will be required for heating in order to achieve thermal comfort. In the tropics, natural ventilation alone may be insufficient for students’ thermal comfort due to the possibility of unconditioned warm or cold outdoor air entering the classroom environment. Additionally, natural ventilation is difficult to control, as there may be overventilation or underventilation due to the ventilation rate being dependent on the outdoor environmental condition such as windspeed. This current traditional literature review appraises previous indoor environmental quality (IEQ) literature on ventilation, thermal comfort, moisture and mold, and cleanliness in schools. Furthermore, a further review was performed on the effect of IEQ (indoor air quality and thermal comfort) on student health and academic outcomes in order to summarize existing knowledge that can help other researchers avoid research duplication and identify research gaps for future school IEQ studies.

New method of integrating experiment for maintaining low indoor temperature into numerical modelling: A feasibility demonstration in reduced-scale building model

Reduced-scale building models have been widely used in experiments because of their convenience and flexibility. However, it is difficult to reduce its indoor temperature and maintain the low temperature at low cost. There is also a lack of accurate numerical modelling and verification of the indoor temperature control process in this model. For this purpose, a reduced-scale test chamber was constructed that can be used to conduct experiments in real outdoor environmental conditions. Lower the indoor air temperature by placing ice in the test chamber and maintain it within the range of 10–15 °C, with a temperature difference of approximately 20 °C from the outdoor air temperature. In addition, the temperature control process in experiment was modelled in detail. The experimental values were compared with the simulated values, and the coefficient of variation of the root mean square error between the two is in the range of 3.64–7.71%. This work integrates experiments into numerical modelling, which not only cross-validates the reliability of each other, but also the verified model can be used for subsequent simulation analysis, including in-depth exploration of key factors affecting experimental results, and calculation of important results that are difficult to measure directly in experiments.