Outcomes Of Rotator Cuff Repair Research Articles

The Effect of Hand Dominance on Functional Outcome Following Single Row Rotator Cuff Repair

Introduction:Rotator cuff tears are a common cause of shoulder disability and pain. Excellent outcomes can be obtained with surgical treatment although this outcome is affected by several factors. We sought to investigate the effect of hand dominance on subjective functional outcome post rotator cuff repair.Methods:All patients who had rotator cuff repair over a calendar year were identified and followed up at 3 years post operatively. Patients were consented for inclusion in the study and demographic data, hand dominance and functional outcome data was collected. L’insalata shoulder questionnaire was used for outcome data collection. SPSS version 22 was used for statistical analysis where appropriate.Results:144 patients were included in this study. Mean age was 63 +/- 10.1 years in the dominant side group and 62 +/- 8.6 years in the non-dominant group. 92 patients had dominant side surgery and 52 had non-dominant side surgery. There was a statistically significant correlation between dominant hand and operated side (P=0.005). The mean overall outcome score was marginally higher in the dominant surgery group with a mean of 89.8 +/- 14.2 compared with a mean of 87.4 +/- 17.5 in the non-dominant group. Multi-variate linear regression analysis revealed this difference to be non-significant (p = 0.4).Conclusion:No difference was found in the functional outcome of rotator cuff repair between dominant and non-dominant side surgery. This information will help in counselling patients who are concerned about the potential impact of rotator cuff repair on the function of their dominant hand.

Murine Supraspinatus Tendon Detachment and Repair Model Augmented With Tendon-Derived, Activated Endothelial Cells: A New Concept in Biologic Enhancement of Tendon-to-Bone Healing

Objectives:Biologic interventions are being increasingly used to improve outcome of rotator cuff repair. Individual growth factors and stem cell-based augmentations are among the most popular approaches. In this study we investigated a novel approach in which tendon-derived, activated endothelial cells (tAECs) are used as a source of tissue-specific growth factors to stimulate tendon intrinsic stem cell niche in our established murine model of microsurgical supraspinatus tendon (SST) detachment and repair.Methods:Study protocol was approved by the IACUC. In stage 1, 20 C57BL/6 mice underwent tendon harvest from fore- and hind limbs and endothelial cells isolation and transfection with adenoviral E4 ORF1 and red fluorescent protein labelling using a proprietary protocol. In stage 2, 158 C57BL/6 mice underwent the procedure with implantation of a 10μm fibrin glue bead (FGB) at the repair site and were randomly allocated to study group (SG) and control group (CG). Study mice received 100,000 tAECs suspended in the FGB. Control mice received the FGB only. 3 mice were sacrificed on post-operative day (POD) #3 and #7 for cell viability study. 96 mice were sacrificed at 1, 2, and 4 weeks, with 10 and 6 mice in each group and time point for biomechanical and histologic evaluations, respectively. 56 mice were sacrificed on POD 5, 10, 14, and 28 for gene expression analysis using qPCR, with 7 mice in each group and time point. Biomechanical evaluation consisted of determination of failure force and site. Histologic parameters were cell count (H&E), number of vessels (factor VIII-specific antibody), number of chondrocytes and proteoglycan content (Alcian Blue), and collagen organization (picrosirius red and polarized light microscopy). 12 evaluated genes were aggrecan (ACAN), collagen1α1 (COL1), collagen3α1 (COL3), MKX, MMP-3, 13, and 14, Runx2, scleraxis (Scx), SOX9, tenomodulin (TNM) and VEGFa.Results:Fluorescent microscopy revealed viable tAECs at the repair site on POD #3 with No fluorescent activity on POD #7. Failure force in the SG was 50% higher at 2 weeks (2.50 ± 0.55 N vs 1.86 ± 0.82 N, p = 0.012) with 65% of all failures occurring at SST mid-substance, whereas 90% of failures in the CG occurred at the repair site. There was no significant difference in failure force at 4 weeks. Cell count, number of vessels, and proteoglycan content (Figure 1) were significantly higher in the SG at all time points. The number of chondrocytes was higher in the SG at 1 week (Figure 1). Quantitative analysis showed significantly superior collagen organization in the SG (Figure 2). SCX, MKX, TNM and COL3 expression were up-regulated on POD #10 and decreased on day #28 in both groups. Expression of TNM and COL3 in the SG showed significance difference at 4 weeks. ACAN, SOX9, COL1, MMP14 expression exhibited an increase starting from POD 5, followed by a significant decline towards baseline by POD 28. In the SG, SOX9 peaked at day 14. Expression of VEGFa showed an uptrend at earlier time points (Figure 3).Conclusion:tAECs increased repair strength of SST. Histologic findings were suggestive of a more vigorous cellular and vascular response, higher proteoglycan content, and ultimately, superior collagen organization. A commensurate pattern was observed in expression of relevant genes. This approach opens a new avenue for cell-based biologic augmentation of SST repair with the goal of stimulating the intrinsic stem cell niche in tendon, as opposed to incorporating exogenous cell sources.

Comparison of clinical outcomes of rotator cuff repair for rotator cuff tears with stiffness or without stiffness

Comparison of clinical outcomes of rotator cuff repair for rotator cuff tears with stiffness or without stiffness

Differences of RNA Expression in the Tendon According to Anatomic Outcomes in Rotator Cuff Repair

Background: Despite increased understanding of the pathophysiology of rotator cuff tears and the evolution of rotator cuff repair, healing failure remains a substantial problem. The critical roles played by biological factors have been emphasized, but little is known of the implications of gene expression profile differences at the time of repair. Purpose: To document the relationship between the perioperative gene expression of healed and unhealed rotator cuffs by RNA microarray analysis. Study Design: Case-control study; Level of evidence, 3. Methods: Superior (supraspinatus involvement) and posterosuperior (supraspinatus and infraspinatus involvement) tears were included in the study. Samples of rotator cuff tendons were prospectively collected during rotator cuff surgery. Three samples were harvested at the tendon ends of tears from the anterior, middle (apex), and posterior parts using an arthroscopic punch. Seven patients with an unhealed rotator cuff were matched one-to-one with patients with a healed rotator cuff by sex, age, tear size, and fatty degeneration of rotator cuff muscles. mRNA microarray analysis was used to identify genetic differences between healed and unhealed rotator cuff tendons. Gene ontology and gene association files were obtained from the Gene Ontology Consortium, and the Gene Ontology system in DAVID was used to identify enhanced biological processes. Results: Microarray analyses identified 262 genes that were differentially expressed by at least 1.5-fold between the healed and unhealed groups. Overall, in the healed group, 103 genes were significantly downregulated, and 159 were significantly upregulated. DAVID Functional Annotation Cluster analysis showed that in the healed group, the genes most upregulated were related to the G protein–coupled receptor protein signaling pathway and to the neurological system. On the other hand, the genes most downregulated were related to immune and inflammatory responses. BMP5 was the gene most upregulated in the healed group, and the majority of downregulated genes were involved in the immune/inflammatory response. Conclusion: The downregulation of inflammatory response genes and the upregulation of cell differentiation genes in torn rotator cuffs at the time of surgery are related to rotator cuff healing. These results provide useful baseline information for future biological studies on rotator cuff healing.

Intra- and inter-observer agreement in MRI assessment of rotator cuff healing using the Sugaya classification 10 years after surgery

BackgroundThe long-term outcomes of rotator cuff repair are unclear. Recurrent tears are common, although their reported frequency varies depending on the type and interpretation challenges of the imaging method used. The primary objective of this study was to assess the intra- and inter-observer reproducibility of the MRI assessment of rotator cuff repair using the Sugaya classification 10years after surgery. The secondary objective was to determine whether poor reproducibility, if found, could be improved by using a simplified yet clinically relevant classification. HypothesisOur hypothesis was that reproducibility was limited but could be improved by simplifying the classification. Material and methodIn a retrospective study, we assessed intra- and inter-observer agreement in interpreting 49 magnetic resonance imaging (MRI) scans performed 10years after rotator cuff repair. These 49 scans were taken at random among 609 cases that underwent re-evaluation, with imaging, for the 2015 SoFCOT symposium on 10-year and 20-year clinical and anatomical outcomes of rotator cuff repair for full-thickness tears. Each of three observers read each of the 49 scans on two separate occasions. At each reading, they assessed the supra-spinatus tendon according to the Sugaya classification in five types. ResultsIntra-observer agreement for the Sugaya type was substantial (κ=0.64) but inter-observer agreement was only fair (κ=0.39). Agreement improved when the five Sugaya types were collapsed into two categories (1–2–3 and 4–5) (intra-observer κ=0.74 and inter-observer κ=0.68). ConclusionUsing the Sugaya classification to assess post-operative rotator cuff healing was associated with substantial intra-observer and fair inter-observer agreement. A simpler classification into two categories improved agreement while remaining clinically relevant. Level of evidenceII, prospective randomised low-power study.

Does an Injection of Adipose-Derived Mesenchymal Stem Cells Loaded in Fibrin Glue Influence Rotator Cuff Repair Outcomes? A Clinical and Magnetic Resonance Imaging Study

Background: The mesenchymal stem cell (MSC)–based tissue engineering approach has been developed to improve the treatment of rotator cuff tears. Hypothesis/Purpose: The purpose was to determine the effect of an injection of adipose-derived MSCs loaded in fibrin glue during arthroscopic rotator cuff repair on clinical outcomes and to evaluate its effect on structural integrity using magnetic resonance imaging (MRI). The hypothesis was that the application of adipose-derived MSCs would improve outcomes after the surgical repair of a rotator cuff tear. Study Design: Cohort study; Level of evidence, 3. Methods: Among 182 patients treated with arthroscopic surgery for a rotator cuff tear, 35 patients treated with arthroscopic rotator cuff repair alone (conventional group) were matched with 35 patients who underwent arthroscopic rotator cuff repair with an injection of adipose-derived MSCs loaded in fibrin glue (injection group) based on sex, age, and lesion size. Outcomes were assessed with respect to the visual analog scale (VAS) for pain, range of motion (ROM) (including forward flexion, external rotation at the side, and internal rotation at the back), and functional measures of the Constant score and University of California, Los Angeles (UCLA) shoulder rating scale. Repaired tendon structural integrity was assessed by using MRI at a minimum of 12 months after surgery, and the mean clinical follow-up was 28.8 ± 4.2 months in the conventional group and 28.3 ± 3.8 months in the injection group. Results: The mean VAS score at rest and during motion improved significantly in both groups after surgery. However, there were no significant differences between the groups at the final follow-up (P = .256 and .776, respectively). Compared with preoperative measurements, forward flexion and external rotation at the side significantly improved at the final follow-up in both groups (all P < .05). However, no significant improvements in internal rotation at the back were observed in either group (P = .625 and .834 for the conventional and injection groups, respectively). There were also no significant differences between the groups at the final follow-up for any of the 3 ROM positions (all P > .05). The mean Constant score and UCLA score improved significantly in both groups after surgery, but there were no significant differences between the groups at the final follow-up (P = .634 and .302, respectively). MRI indicated a retear rate of 28.5% in the conventional group and 14.3% in the injection group (P < .001). Conclusion: This study revealed that an injection of adipose-derived MSCs loaded in fibrin glue during rotator cuff repair could significantly improve structural outcomes in terms of the retear rate. There were, however, no clinical differences in the 28-month period of follow-up. Although still in the early stages of application, MSC augmentation of surgical rotator cuff repair appears useful for providing an adequate biological environment around the repair site.

Outcomes of Rotator Cuff Repair in Patients with Comorbid Disability in the Extremities.

BackgroundRehabilitation and overuse of the shoulder after rotator cuff repair are a concern in patients with comorbid disability in other extremities. Improvement of outcomes can be hampered in this situation. This study was to describe the clinical outcomes of rotator cuff repair in patients with comorbid disability in other extremities.MethodsIn two tertiary institutions, 16 patients with comorbid disability (9 men and 7 women; mean age of 57.1 years [range, 45 to 71 years]; 14 dominant arms; mean follow-up of 18 months [range, 12 to 38 months]) underwent rotator cuff repair. There were 5 massive tears, 1 large tear, 9 medium tears, and 1 small tear. Open repair was performed in 3 patients and arthroscopic repair in 13. The most common comorbid condition was paralysis (n = 7). Eight patients walked with crutches preoperatively. Anatomical outcome was investigated in 12 patients using either magnetic resonance imaging or ultrasonography at least 6 months postoperatively.ResultsRange of motion, visual analogue scale for pain and satisfaction, and all functional scores improved significantly. Healing failure occurred in 4 patients (2 large-to-massive and 2 medium size tears), but none required revision surgery. All 4 retears involved the dominant side, and 3 patients were crutch users.ConclusionsThe current data suggested favorable outcome of rotator cuff repair in patients with comorbid disability. Careful surgical planning and rehabilitation is particularly important for crutch users and in the case of dominant arm involvement in disabled patients.

The Relationship Between Shoulder Stiffness and Rotator Cuff Healing

Retear and stiffness are not uncommon outcomes of rotator cuff repair. The purpose of this study was to evaluate the relationship between rotator cuff repair healing and shoulder stiffness. A total of 1,533 consecutive shoulders had an arthroscopic rotator cuff repair by a single surgeon. Patients assessed their shoulder stiffness using a Likert scale preoperatively and at 1, 6, 12, and 24 weeks (6 months) postoperatively, and examiners evaluated passive range of motion preoperatively and at 6, 12, and 24 weeks postoperatively. Repair integrity was determined by ultrasound evaluation at 6 months. After rotator cuff repair, there was an overall significant loss of patient-ranked and examiner-assessed shoulder motion at 6 weeks compared with preoperative measurements (p < 0.0001), a partial recovery at 12 weeks, and a full recovery at 24 weeks. Shoulders that were stiff before surgery were more likely to be stiff at 6, 12, and, to a lesser extent, 24 weeks after surgery (r = 0.10 to 0.31; p < 0.0001). A stiffer shoulder at 6 and 12 weeks (but not 24 weeks) postoperatively correlated with better rotator cuff integrity at 6 months postoperatively (r = 0.11 to 0.18; p < 0.001). The retear rate of patients with ≤20° of external rotation at 6 weeks postoperatively was 7%, while the retear rate of patients with >20° of external rotation at 6 weeks was 15% (p < 0.001). In patients who developed stiffness after surgery, a rotator cuff repair was more likely to heal. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Does anchor type, anchor material or suture configuration affect the outcome of rotator cuff repair – Analysis from the New Zealand Rotator Cuff Registry

Does anchor type, anchor material or suture configuration affect the outcome of rotator cuff repair – Analysis from the New Zealand Rotator Cuff Registry

Triple-Row Modification of the Suture-Bridge Technique for Arthroscopic Rotator Cuff Repair

Recent advances to improve outcomes in rotator cuff repair include using arthroscopic double-row suture-bridge techniques in an effort to reconstruct the rotator cuff footprint and improve fixation. However, when using this technique for larger tears, it can be difficult to get the lateral portion of the rotator cuff into an anatomic position. This report describes a triple-row modification of the suture-bridge technique that results in significantly more footprint contact area and contact pressure compared with the double-row and standard suture-bridge techniques. Maximizing the rotator cuff footprint contact area exposes more of the tendon to bone and may improve the healing potential.

Evaluation of Repair Tension in Arthroscopic Rotator Cuff Repair

Background: Repair tension of a torn rotator cuff can affect healing after repair. However, a measurement of the actual tension during arthroscopic rotator cuff repair is not feasible. The relationship between repair tension and healing of a rotator cuff repair remains unclear. Purpose/Hypothesis: The purpose of this study was to evaluate the effect of repair tension on healing at the repair site. The hypothesis was that repair tension would be a major factor in determining the anatomic outcome of rotator cuff repair. Study Design: Cohort study; Level of evidence, 2. Methods: Arthroscopic rotator cuff repairs (132 patients) for full-thickness rotator cuff tears were analyzed. An intraoperative model was designed for the estimation of repair tension using a tensiometer. Magnetic resonance imaging (MRI) was performed approximately 1 year (mean [±SD], 12.7 ± 3.2 months) postoperatively for the evaluation of healing at the repair site. Multivariable analysis was performed for tear size, amount of retraction, and fatty degeneration (FD) of rotator cuff muscles. Results: The mean repair tension measured during the arthroscopic procedure was 28.5 ± 23.1 N. There was a statistically significant correlation between tension and tear size (Pearson correlation coefficient [PCC], 0.529; P < .001), amount of retraction (PCC, 0.619; P < .001), and FD of the supraspinatus (Spearman correlation coefficient [SCC], 0.308; P < .001) and infraspinatus (SCC, 0.332; P < .001). At the final follow-up (12.7 ± 3.2 months), healing failure was observed in 18.2% (24/132), and repair tension also showed a significant inverse correlation with healing at the repair site (SCC, 0.195; P = .025). However, when sex, age, tear size, amount of retraction, tendon quality, and FD of rotator cuff muscles were included for multivariable logistic regression analysis, only FD of the infraspinatus showed an association with the anatomic outcome of repair (Exp(B) = 0.596; P = .010). Conclusion: Our intraoperative model for the estimation of rotator cuff repair tension showed an inverse correlation of repair tension with healing at the repair site, suggesting that complete healing is less likely with high-tension repairs. A significant association was observed on MRI between a high level of FD of the infraspinatus and repaired tendon integrity.

Comparison of fixation properties between coil-type and screw-type anchors for rotator cuff repair: A virtual pullout testing using 3-dimensional finite element method.

Pullout of inserted anchor constitutes one of the pathomechanisms of re-tearing after rotator cuff repair. The purpose of the present study was to investigate the fixation properties of suture anchors using 3-dimensional finite element method. The computer models of three types of anchors (TwinFix Ti, HEALICOIL PK and HEALICOIL RG) were inserted into the isotropic cube model that simulated cancellous bone. In the virtual pullout testing, a tensile load (500N) along the long axis of the inserted anchor was applied to the site of suture thread attachment to simulate a traction force. The distribution of von Mises equivalent stress, the failure patterns of elements inside the cube and the anchor displacement were compared among the three anchors. In TwinFix Ti, the highest stress concentration was seen around the anchor threads close to the surface of the cube, which caused element failure at this site. On the other hand, both HEALICOIL PK and HEALICOIL RG demonstrated a high stress concentration as well as element failure around the anchor tip. Comparing the anchor displacement, HEALICOIL RG showed the smallest displacement among the three anchors. The tensile loads that required a 0.1-mm displacement for TwinFix Ti, HEALICOIL PK and HEALICOIL RG were 400N, 370N, and greater than 500N, respectively. The bony structures close to the footprint surface may be damaged during surgery due to preparation for the bony bed as well as the insertion of anchors. Thus, we assumed that HEALICOIL RG represented the best initial fixation properties among the three anchors tested. Virtual pullout testing using 3-dimensional finite element method could reveal the detailed biomechanical characteristics of each suture anchor, which would be important for shoulder surgeons to improve the clinical outcomes of rotator cuff repair.

A prospective, multicenter study to evaluate clinical and radiographic outcomes in primary rotator cuff repair reinforced with a xenograft dermal matrix

Minimal information is currently available on the outcome of rotator cuff repair reinforced with an extracellular matrix (ECM) graft. Therefore, the purpose of this study was to determine the clinical and radiographic outcome of repair of large rotator cuff tears with ECM graft reinforcement. This was a prospective study of 61 shoulders with large repairable rotator cuff tears (3 to 5 cm). The rotator cuff tears were surgically repaired and reinforced with a xenograft ECM graft. The average patient age was 56 years (range, 40-69 years). The average tear size was 3.8 cm. Follow-up was obtained at 6, 12, and 24 months in 58, 54, and 50 of the 61 patients, respectively. Functional outcome scores, isometric muscle strength, and active range of motion were significantly improved compared with baseline. Magnetic resonance imaging at 12 months showed retorn rotator cuff repairs in 33.9% of shoulders, using the criteria of a tear of at least 1 cm, and tears in 14.5% of the shoulders using the criteria of retear >80% of the original tear size. Three patients underwent surgical revision. Complications included 1 deep infection. Repair of large rotator cuff tears structurally reinforced with xenograft ECM resulted in improved functional outcomes scores and strength. Adverse events were uncommon, and the rate of revision surgery was low.

The effect of concomitant glenohumeral joint capsule release during rotator cuff repair—a comparative study

There is debate as to whether to operate or to defer surgery on patients with concomitant rotator cuff tear and shoulder stiffness. The purpose of this study was therefore to compare the outcomes in those patients who had both their rotator cuff tear and shoulder stiffness treated with the outcomes of patients who had a rotator cuff repair but no stiffness. Twenty-five patients formed the stiffness group (receiving a concomitant rotator cuff repair and manipulation under anesthesia ± arthroscopic capsular release for preoperative ipsilateral stiffness), and a chronologically matched group of 170 rotator cuff repair-only patients formed the nonstiffness group. Patients ranked their pain and function scores preoperatively and at 1 week, 6 weeks, 12 weeks, 6 months, and 2 years postoperatively; examiners recorded range of motion, strength, and presence of impingement signs. Repair integrity was determined using ultrasound. Patients from both groups had significantly improved clinical outcomes at the 2-year follow-up compared with preoperative values. Range of motion was similar between groups at 2 years for forward flexion, abduction, and external rotation, whereas the nonstiffness group had a superior range of internal rotation (P = .014). Stiffness patients had 0 of 25 (0%) retears at 2 years compared with 34 of 170 (20%) in the nonstiffness group (P = .009). The good outcomes of rotator cuff repair with glenohumeral capsular release disproved our hypothesis and suggest that there is no advantage in delaying repair of a rotator cuff tear to allow stiffness to resolve and that stiffness confers an advantage in terms of repair integrity. Level III; Retrospective Cohort Design; Treatment Study.

Effect of Teres Minor Fatty Infiltration on Rotator Cuff Repair Outcomes

To observe changes in fatty infiltration (FI) of the teres minor without tear of the teres minor in a postoperative magnetic resonance imaging and to evaluate the influence of FI of the teres minor in the clinical outcomes of rotator cuff repair. Of 816 patients who underwent rotator cuff repair, 51 (6.3%) had FI of the teres minor without tear involvement and 30 cases were available for postoperative magnetic resonance imaging. FI and functional outcome scores were assessed and compared with the control group that had no FI of the teres minor selected by a propensity score matching. FI of the teres minor was observed in various degrees (grade 1 in 9, grade 2 in 9, grade 3 in 6, and grade 4 in 6). The degree of FI was not related to the amount of tendon involvement of a rotator cuff tear (P = .240). All postoperative functional outcome scores (12.6 ± 1.2 months; range, 11-17), including pain visual analog scale, Simple Shoulder Test, and American Shoulder and Elbow Surgeons Score, significantly improved (all P < .001), and there were no significant differences compared with that of the control group. In most of the cases, FI of the teres minor was unchanged (P = .317). FI of the teres minor without tear involvement can be observed in a rotator cuff tear as a possibly incidental finding of unknown clinical significance. Its cause has not been determined, and it appears that FI of the teres minor does not appear to improve, at least at the 1-year follow-up. Nevertheless, the functional outcomes of the repair were successful in our study; therefore, rotator cuff repair can be performed without a great deal of concern in the presence of FI in the teres minor. Level III, retrospective comparative study.

Trauma versus no trauma: an analysis of the effect of tear mechanism on tendon healing in 1300 consecutive patients after arthroscopic rotator cuff repair

Patients with rotator cuff tears often recall a specific initiating event (traumatic), whereas many cannot (nontraumatic). It is unclear how important a history of trauma is to the outcomes of rotator cuff repair. This question was addressed in a study cohort of 1300 consecutive patients who completed a preoperative questionnaire regarding their shoulder injury and had a systematic evaluation of shoulder range of motion and strength, a primary arthroscopic rotator cuff repair performed by a single surgeon, an ultrasound scan, and the same subjective and objective measurements made of their shoulder 6 months after surgery. Post hoc, this cohort was separated into 2 groups: those who reported no history of trauma on presentation (n = 489) and those with a history of traumatic injury (n = 811). The retear rate in the group with no history of trauma was 12%, whereas that of the group with a history of trauma was 14% (P = .36). Those patients with a history of shoulder trauma who waited longer than 24 months had higher retear rates (20%) than those who had their surgery earlier (13%) (P = .040). Recollection of a traumatic initiating event had little effect on the outcome of arthroscopic rotator cuff repair. Duration of symptoms was important in predicting retears if patients recalled a specific initiating event but not in patients who did not recall any specific initiating event. Patients with a history of trauma should be encouraged to have their rotator cuff tear repaired within 2 years.

Prognostic factors influencing the outcome of rotator cuff repair: a systematic review.

To identify prognostic factors significantly associated with rotator cuff repair outcome and define the strength of these associations. Search was performed using electronic databases. Studies reporting prognostic factors affecting rotator cuff repair outcome were included. Primary outcomes were: structural integrity, Disabilities of the Arm, Shoulder and Hand score, American Shoulder and Elbow Surgeons score, and Constant score. Each other outcome was considered as secondary outcome. Descriptive statistics was used. When possible, meta-analyses were performed. Methodological quality was assessed using the Quality In Prognosis Studies Tool. A best evidence synthesis was performed using the Grading of Recommendations Assessment, Development and Evaluation framework adapted to prognostic studies. Sixty-four studies were included. Methodological quality was high only for twelve studies. The overall quality of evidence was low to very low. Meta-analyses were possible only for seven studies. Older age and larger tears size were found to affect retear risk. Results were controversial for fatty infiltration, acromioclavicular joint or biceps procedures, acromiohumeral distance, delamination of tendon edges, musculotendinous junction position, number of tendons involved, and tendon length, quality and retraction. Baseline scores and workers compensation claim predicted functional outcomes. Subjective outcome was also affected by patient's expectations. Despite the large number of outcomes and prognostic factors evaluated by a relative small number of studies, almost not prognostic in design, it was not possible to reach any definitive conclusion regarding the most relevant predictors of outcome of rotator cuff repair. Moreover, the low methodological quality of the included studies and, subsequently, the low quality of evidence, seriously affected the strength of recommendation of the present review. Based on data available, retear risk is mainly affected by older age and larger tears size. Baseline scores and work compensation claim are the most significant predictors for functional outcomes. Systematic review of level I-IV prognostic studies, Level IV.

Traitement chirurgical des lésions de la coiffe des rotateurs du sujet de moins de 50 ans

BackgroundRotator cuff tears are classically considered to result from a degenerative process. Many studies have reported satisfactory outcome for surgical treatment in older patients. Information is scarce however on partial or total cuff repairs, using arthroscopic or open procedures, in younger populations. The purpose of this work was to analyze the literature on rotator cuff repair in patients aged less than 50 years. MethodsA bibliography search of Pubmed and Google scholar was conducted using the keywords “rotator cuff tears”, “rotator cuff repairs”, and “younger patients”. The last search was performed on April 15, 2014. Inclusion criteria were studies written in English or French, concerning chronic or acute cuff tears in patients aged less than 50 years, level of proof 1–4, and clinical results in at least 10 patients. Exclusion criteria were reviews of the literature, expert opinions, early studies published more than 15 years ago and non-clinical studies. The main endpoint was clinical outcome of rotator cuff repair in young subjects aged less than 50 years. ResultsTen studies published between 1999 and 2013 were retained. Together, these studies provided outcomes for 306 operated patients. Mean follow-up was 48 months (range 18–71). A good subjective outcome is reported in more than 85.3% of patients (range 55–97) who were satisfied or very satisfied. Patients were able to resume their occupational or sports activities in 91% of cases, within a mean delay of 4.8 months. ConclusionRotator cuff tears in young subjects are most often trauma or sports related. Male gender predominates. Functional outcome of surgical treatment of these lesions has been good.

Shoulder &amp; Elbow

The April 2015 Shoulder &amp; Elbow Roundup360 looks at: Distal clavicular resection not indicated in cuff repair?; Platelet-rich plasma in rotator cuff repair; Radial head geometry: time to change?; Heterotopic ossification in elbow trauma; Another look at heterotopic ossification in the humerus; Triceps on for total elbow arthroplasty?; Predicting outcomes in rotator cuff repair; Deltoid fatty infiltration and reverse shoulder arthroplasty

Advances in biology and mechanics of rotator cuff repair.

High initial fixation strength, mechanical stability and biological healing of the tendon-to-bone interface are the main goals after rotator cuff repair surgery. Advances in the understanding of rotator cuff biology and biomechanics as well as improvements in surgical techniques have led to the development of new strategies that may allow a tendon-to-bone interface healing process, rather than the formation of a fibrovascular scar tissue. Although single-row repair remains the most cost-effective technique to address a rotator cuff tear, some biological intervention has been recently introduced to improve tissue healing and clinical outcome of rotator cuff repair. Animal models are critical to ensure safety and efficacy of new treatment strategies; however, although rat shoulders as well as sheep and goats are considered the most appropriate models for studying rotator cuff pathology, no one of them can fully reproduce the human condition. Emerging therapies involve growth factors, stem cells and tissue engineering. Experimental application of growth factors and platelet-rich plasma demonstrated promising results, but has not yet been transferred into standardized clinical practice. Although preclinical animal studies showed promising results on the efficacy of enhanced biological approaches, application of these techniques in human rotator cuff repairs is still very limited. Randomized controlled clinical trials and post-marketing surveillance are needed to clearly prove the clinical efficacy and define proper indications for the use of combined biological approaches. The following review article outlines the state of the art of rotator cuff repair and the use of growth factors, scaffolds and stem cells therapy, providing future directions to improve tendon healing after rotator cuff repair. Expert opinion, Level V.