Osteogenic Peptide Research Articles

3D printing of bone scaffolds for treating infected mandible bone defects through adjustable dual-release of chlorhexidine and osteogenic peptide

Preventing implant-related bone infection during treating mandibular bone defect is still challenging as intractable bacterial infection in the irregular defects often leads to surgical failure and other fatal complications. Herein, we fabricate a multifunctional scaffold with controlled dual-stage drug release to achieve antibacterial and osteogenic therapy during infected bone reconstruction. Water-in-oil (w/o) β-tricalcium phosphate (TCP) nanoparticle/ poly(Lactic-co-glycolic acid) (PLGA)/dichloromethane composite emulsion inks containing the antibacterial chlorhexidine (CHX) loaded graphene oxide (GO) nanosheets and osteogenic peptide (p24) was produced through cryo-3D printing. A biphasic drug release profile is achieved via a rapid CHX release from CHX@GO on scaffold surface to kill the bacteria, and a sustained release of CHX and p24 from the scaffold matrix to prevent the recurrence of infection and induce bone regeneration. Interestingly, the GO nanosheet increased the antibacterial sensitivity through its direct physical contact which destroyed the bacteria membrane. Furthermore, the p24 and phosphate ions derived from dissociated TCP nanoparticles could induce the osteogenic differentiation of bone marrow derived stem cells. Eventually, the designed scaffolds effectively eliminated the bacteria, alleviated the accompanying inflammation, and improved bone regeneration in a rat model. The present study provides a facile strategy to treat bone defects with infection.

Novel Peptides Derived from Sea Cucumber Intestine Promotes Osteogenesis by Upregulating Integrin-Mediated Transdifferentiation of Growth Plate Chondrocytes to Osteoblasts.

The sea cucumber intestine is a major by-product of sea cucumber processing and contains high levels of protein. In this study, we isolated and identified 28 novel osteogenic peptides from sea cucumber intestinal hydrolysis by the activity-tracking method for the first time. In vitro experimental results showed that compared with high molecular weight, the peptides from sea cucumber intestine (SCIP) with molecular weight <3 kDa more significantly promoted the proliferation and mineralized nodules of MC3T3-E1 cell and exhibited potential integrin binding capacity. In vivo experimental results showed that the SCIP supplement significantly increased the longitudinal bone length and elevated the height of the growth plate (especially the hypertrophic zone, 37.2%, p < 0.01) in adolescent mice. Further, immunofluorescence labeling results indicated that the SCIP supplement increased chondrocyte transdifferentiate to osteoblast in the growth plate close to the diaphysis. Mechanistically, transcriptome analysis revealed that the SCIP supplement induced the dedifferentiation of chondrocyte to osteoprogenitor cell via integrin-mediated histone acetylation and then redifferentiated to osteoblast via integrin-mediated Wnt/β-catenin signaling. These results reported for the first time that sea cucumber intestine had the potential to develop into a dietary supplement for promoting osteogenic, and provide new evidence for the mechanism of dietary promotes chondrocyte to osteoblast transdifferentiation.

Identification and functional analysis of three novel osteogenic peptides isolated from tilapia scale collagen hydrolysate

On the basis of our previous study that 133 peptides were identified from the tilapia scale peptide-calcium chelate, the potential osteogenic peptide monomers through the calcium-binding properties of peptides and molecular docking were screened, and the osteogenic activity and active mechanism of the peptides were further researched in this study. Three highly osteogenic peptides GPAGPHGPVG (844.4191 Da), APDPFRMY (995.4534 Da), and TPERYY (827.3813 Da) were screened. Molecular docking showed that the three osteogenic peptides had the same interaction sites in the epidermal growth factor receptor (EGFR), namely ARG 285, GLN 8, GLY 317, THR 406, and HIS 409. Compared to the blank control group, within 50 μg/mL of GPAGPHGPVG, APDPFRMY, and TPERYY increased the proliferation of MC3T3-E1 cells by changing the cell proportion in the S and G2/M phases, and the alkaline phosphatase (ALP) activity of MC3T3-E1 cells treated with 50 μg/mL of the three active peptides increased by 25%, 37%, and 56%, respectively. The three active peptides at 10 μg/mL concentration significantly promoted the mineralization of osteoblasts, and the mineralized calcium nodules increased by 166%, 161%, and 111%, respectively. TPERYY significantly increased the expression of osteogenic genes (osteocalcin (OCN), type I collagen (Col I α) and transcription factor (OSX)). Moreover, TPERYY significantly increased the mRNA and protein expression of β-catenin to 1.39 and 2.6 times of the blank control group, respectively, while decreased the mRNA and protein expression of glycogen synthesis kinase (GSK3β) to 1.6 and 2.3 times of the blank control group, respectively. This study provides a theoretical basis for using GPAGPHGPVG, APDPFRMY, and TPERYY peptides as functional foods to prevent osteoporosis.

Low temperature hybrid 3D printing of hierarchically porous bone tissue engineering scaffolds with in situ delivery of osteogenic peptide and mesenchymal stem cells

Compared to other conventional scaffold fabrication techniques, three-dimensional (3D) printing is advantageous in producing bone tissue engineering scaffolds with customized shape, tailored pore size/porosity, required mechanical properties and even desirable biomolecule delivery capability. However, for scaffolds with a large volume, it is highly difficult to get seeded cells to migrate to the central region of the scaffolds, resulting in an inhomogeneous cell distribution and therefore lowering the bone forming ability. To overcome this major obstacle, in this study, cell-laden bone tissue engineering scaffolds consisting of osteogenic peptide (OP) loaded β-tricalcium phosphate (TCP)/poly(lactic-co-glycolic acid) (PLGA) (OP/TCP/PLGA, designated as OTP) nanocomposite struts and rat bone marrow derived mesenchymal stem cell (rBMSC)-laden gelatin/GelMA hydrogel rods were produced through ‘dual-nozzle’ low temperature hybrid 3D printing. The cell-laden scaffolds exhibited a bi-phasic structure and had a mechanical modulus of about 19.6 MPa, which was similar to that of human cancellous bone. OP can be released from the hybrid scaffolds in a sustained manner and achieved a cumulative release level of about 78% after 24 d. rBMSCs encapsulated in the hydrogel rods exhibited a cell viability of about 87.4% right after low temperature hybrid 3D printing and could be released from the hydrogel rods to achieve cell anchorage on the surface of adjacent OTP struts. The OP released from OTP struts enhanced rBMSCs proliferation. Compared to rBMSC-laden hybrid scaffolds without OP incorporation, the rBMSC-laden hybrid scaffolds incorporated with OP significantly up-regulated osteogenic differentiation of rBMSCs by showing a higher level of alkaline phosphatase expression and calcium deposition. This ‘proof-of-concept’ study has provided a facile method to form cell-laden bone tissue engineering scaffolds with not only required mechanical strength, biomimetic structure and sustained biomolecule release profile but also excellent cell delivery capability with uniform cell distribution, which can improve the bone forming ability in the body.

Synergistic Effects and Mechanisms of Ultrasound-Assisted Pretreatments on the Release of Yak (Bos grunniens) Bone Collagen–Derived Osteogenic Peptides in Enzymatic Hydrolysis

Synergistic Effects and Mechanisms of Ultrasound-Assisted Pretreatments on the Release of Yak (Bos grunniens) Bone Collagen–Derived Osteogenic Peptides in Enzymatic Hydrolysis

Structural Mapping of BMP Conformational Epitopes and Bioengineering Design of Osteogenic Peptides to Specifically Target the Epitope-Binding Sites.

Human bone morphogenetic proteins (BMPs) constitute a large family of cytokines related to members of the transforming growth factor-β superfamily, which fulfill biological functions by specificity binding to their cognate type I (BRI) and type II (BRII) receptors through conformational wrist and linear knuckle epitopes, respectively. We systematically examined the intermolecular recognition and interaction between the BMP proteins and BRI receptor at structural, energetic and dynamic levels. The BRI-binding site consists of three hotspot regions on BMP surface, which totally contribute ~70% potency to the BMP-BRI binding events and represent the core sections of BMP conformational wrist epitope; the contribution increases in the order: hotspot 2 (~8%) < hotspot 3 (~20%) < hotspot 1 (~40%). Multiple sequence alignment and structural superposition revealed a consensus sequence pattern and a similar binding mode of the three hotspots shared by most BMP members, indicating a high conservation of wrist epitope in BMP family. The three hotspots are natively folded into wellstructured U-shaped,, loop and double-stranded conformations in BMP proteins, which, however, would become largely disordered when splitting from the protein context to derive osteogenic peptides in free state, thus largely impairing their rebinding capability to BRI receptor. In this respect, cyclization strategy was employed to constrain hotspot 1/3-derived peptides into a native-like conformation, which was conducted by adding a disulfide bond across the ending arms of linear peptides based on their native conformations. Fluorescence-based assays substantiated that the cyclization can effectively improve the binding affinities of osteogenic peptides to BRI receptor by 3-6-fold. The cyclic peptides also exhibit a good selectivity for BRI over BRII (>5-fold), confirming that they can specifically target the wrist epitope-binding site of BRI receptor. The rationally designed cyclic peptides can be regarded as the promising lead entities that should be further chemically modified to enhance their in vivo biological stability for further bioengineering therapeutic osteogenic peptides againstchondrocyte senescence and bone disorder.

Characterization of Chelation and Absorption of Calcium by a Mytilus edulis Derived Osteogenic Peptide.

In a previous study, the peptide LGKDQVRT, which was identified by enzymatic hydrolysis, released during the proteolysis of Mytilus edulis, had potential osteogenic activity. In this study, the octapeptide LGKDQVRT was able to spontaneously bind calcium in a 1:1 stoichiometric ratio, and the calcium-binding site likely involves calcium and amino acid VAL6 in the LGKDQVRT peptide to form a metal-donor to metal acceptor complex. The peptide LGKDQVRT has the activity of promoting the proliferation and differentiation of osteoblasts. The results of this study suggest that hydrolyzed peptides from Mytilus edulis protein can be used as a dietary supplement to improve calcium absorption and prevent osteoporosis.

Synergistic osteogenic and angiogenic effects of KP and QK peptides incorporated with an injectable and self-healing hydrogel for efficient bone regeneration.

Irregular defects generated by trauma or surgery in orthopaedics practice were usually difficult to be fitted by the preformed traditional bone graft substitute. Therefore, the injectable hydrogels have attracted an increasing interest for bone repair because of their fittability and mini-invasivity. However, the uncontrollable spreading or mechanical failures during its manipulation remain a problem to be solved. Moreover, in order to achieve vascularized bone regeneration, alternatives of osteogenic and angiogenic growth factors should be adopted to avoid the problem of immunogenicity and high cost.In this study, a novel injectable self-healing hydrogel system (GMO hydrogel) loaded with KP and QK peptides had been developed for enhancing vascularized regeneration of small irregular bone defect. The dynamic imine bonds between gelatin methacryloyl and oxidized dextran provided the GMO hydrogel with self-healing and shear-thinning abilities, which led to an excellent injectability and fittability. By photopolymerization of the enclosed GelMA, GMO hydrogel was further strengthened and thus more suitable for bone regeneration. Besides, the osteogenic peptide KP and angiogenic peptide QK were tethered to GMO hydrogel by Schiff base reaction, leading to desired releasing profiles. In vitro, this composite hydrogel could significantly improve the osteogenic differentiation of BMSCs and angiogenesis ability of HUVECs. In vivo, KP and QK in the GMO hydrogel demonstrated a significant synergistic effect in promoting new bone formation in rat calvaria. Overall, the KP and QK loaded GMO hydrogel was injectable and self-healing, which can be served as an efficient approach for vascularized bone regeneration via a minimally invasive approach.

Bioactive Cellulose Acetate Electrospun Mats as Scaffolds for Bone Tissue Regeneration.

In the last decades, cell-based approaches for bone tissue engineering (BTE) have relied on using models that cannot replicate the complexity of the bone microenvironment. There is an ongoing amount of research on scaffold development responding to the need for feasible materials that can mimic the bone extracellular matrix (ECM) and aid bone tissue regeneration (BTR). In this work, a porous cellulose acetate (CA) fiber mat was developed using the electrospinning technique and the mats were chemically modified to bioactivate their surface and promote osteoconduction and osteoinduction. The mats were characterized using FTIR and SEM/EDS to validate the chemical modifications and assess their structural integrity. By coupling adhesive peptides KRSR, RGD, and growth factor BMP-2, the fiber mats were bioactivated, and their induced biological responses were evaluated by employing immunocytochemical (ICC) techniques to study the adhesion, proliferation, and differentiation of premature osteoblast cells (hFOB 1.19). The biological assessment revealed that at short culturing periods of 48 hours and 7 days, the presence of the peptides was significant for proliferation and adhesion, whereas at longer culture times of 14 days, it had no significant effect on differentiation and maturation of the osteogenic progenitor cells. Based on the obtained results, it is thus concluded that the CA porous fiber mats provide a promising surface morphology that is both biocompatible and can be rendered bioactive upon the addition of osteogenic peptides to favor osteoconduction leading to new tissue formation.

Osteogenic peptides in periodontal ligament stem cell-containing three-dimensional bioscaffolds promote bone healing.

Bone tissue engineering shows great potential in bone regeneration; however, the lack of bone growth factors with high biocompatibility and efficiency is a major concern. Oligopeptides have drawn great attention due to their high biological efficacy, low toxicity, and low molecular weight. The oligopeptide SDSSD promotes the osteogenesis of human periodontal ligament stem cells (hPDLSCs) in vitro. The SDSSD-modified three-dimensional (3D) bioscaffolds promote osteogenesis and bone formation in the subcutaneous pockets of BALB/c nude mice and facilitate bone healing in vivo. Mechanistically, SDSSD promoted bone formation by binding to G protein-coupled receptors and regulating the AKT signaling pathway. 3D-printing bioscaffolds with SDSSD may be potential bone tissue engineering materials for treating bone defects.

Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide.

Background: Currently used synthetic bone graft substitutes (BGS) are either too weak to bear the principal load or if metallic, they can support loading, but can lead to stress shielding and are unable to integrate fully. In this study, we developed biocompatible, 3D printed scaffolds derived from µCT images of the bone that can overcome these issues and support the growth of osteoblasts. Methods: Cylindrical scaffolds were fabricated with acrylonitrile butadiene styrene (ABS) and Stratasys® MED 610 (MED610) materials. The 3D-printed scaffolds were seeded with Mus musculus calvaria cells (MC3T3). After the cells attained confluence, osteogenesis was induced with and without the addition of calcitonin receptor fragment peptide (CRFP) and the bone matrix production was analyzed. Mechanical compression testing was carried out to measure compressive strength, stiffness, and elastic modulus. Results: For the ABS scaffolds, there was a 9.8% increase in compressive strength (p < 0.05) in the scaffolds with no pre-coating and the treatment with CRFP, compared to non-treated scaffolds. Similarly, MED610 scaffolds treated with CRFP showed an 11.9% (polylysine pre-coating) and a 20% (no pre-coating) increase (p < 0.01) in compressive strength compared to non-treated scaffolds. Conclusions: MED610 scaffolds are excellent BGS as they support osteoblast growth and show enhanced bone growth with enhanced compressive strength when augmented with CRFP.

Structural definition of the discrete hotspot sites of BMP-2 conformational wrist epitope and rational design of the hotspot-derived osteogenic peptides against chondrocyte senescence

The bone morphogenetic protein-2 (BMP-2) is an essential regulator of bone formation and remodeling, which has also been implicated in the pathogenesis of osteoarthritis and its closely related chondrocyte senescence. The BMP-2 uses a conformational wrist epitope and a linear knuckle epitope to interact with type-I (BMPR-I) and type-II (BMPR-II) receptors, respectively. Previously, the knuckle epitope has been intensely studied, but the wrist epitope still remains largely unexplored due to its discontinuous nature. In the present work, the intermolecular interaction of BMP-2 with BMPR-I was investigated systematically at structural, energetic and dynamic levels. Three discrete hotspots that represent the key BMPR-I recognition sites of BMP-2 were identified; they are spatially dispersed over the two monomers of BMP-2 dimer and totally account for 83.5 % binding potency of BMP-2 to BMPR-I (hotspot 1: residues 49–70 in monomer 1; hotspot 2: residues 24–31 in monomer 2; hotspot 3: residues 88–107 in monomer 2). Therefore, we defined the three discrete hotspot sites as the core region of wrist epitope; their contribution to the binding increases in the order: hotspot 2 < hotspot 3 < hotspot 1. We demonstrated that the primary hotspot 1 site has a native U-shaped conformation in the full-length BMP-2 protein context, but it cannot maintain in the native conformation when split from the context to obtain a free hotspot-1 peptide, thus largely impairing its binding potency to BMPR-I. We further employed disulfide-bonded cyclization and head-to-tail cyclization to constrain the peptide conformation, and found that only the former can effectively constrain the peptide into native conformation, thus considerably improving its binding affinity to BMPR-I, whereas the latter totally disorders the native conformation, thus rendering the peptide as a full nonbinder of BMPR-I.

Multifunctional Modification of SIS Membrane with Chimeric Peptides to Promote Its Antibacterial, Osteogenic, and Healing‐Promoting Abilities for Applying to GBR

AbstractGuided bone regeneration (GBR) technology is the most widely used and stable method for bone defect repair. However, infectious bone defect limits the application of this technique. Herein, a small intestinal submucosa (SIS) membrane modified by chimeric peptides as a new type of GBR membrane is developed for efficacious tissue regeneration. Based on the main components of SIS membrane are I and III collagen, collagen binding peptides TKKTLRT and KELNLVY sequences are used to construct chimeric peptides with healing‐promoting peptide Hst1 or antibacterial osteogenic peptide JH8194, so as to realize the specifically target of SIS. This method achieves the fast and efficient multifunctional modification of SIS membrane. The chimeric peptides modified SIS (pSIS) membrane has satisfactory biocompatibility and a certain degree of antibacterial activity. Moreover, pSIS promotes the osteogenic related factors expression of rat bone mesenchymal stem cells and demonstrates great bone regeneration in rat skull defect model. Furthermore, pSIS accelerates the migration of oral epithelial cells in vitro and activate integrin α3β1 signal pathway contribute to wound healing. This study presents a novel biomaterial design of GBR membrane, specifically for the treatment of infectious bone defects.

English

The use of dental implants for the replacement of missing teeth has increased in the last 30 years. The success rates for implant placement depend on a series of both biological and clinical steps which starts with primary stability that is being provided by the amount, quality and the distribution of bone within the proposed implant site. The most important factor in implant osseointegration is surface roughness, which shows increased osteoblast activity at 1 to 100 μm of the surface roughness when compared to a smooth surface. Rough surfaces have excellent osseointegration than smooth surfaces, but the results of research have been diverse, and it is evident that multiple treatments provide good results. The surfaces of a dental implant have been modified in several ways to improve its biocompatibility and speed up osseointegration. Literature says that any surface modification provides a good surface for osseointegration of the implant when the surface roughness is about 0.44 ~ 8.68 μm. It is also said that acid etching and coating are the most preferred methods for creating good roughness of the implant surface. From animal studies, it is known that implant surface modifications provided by biomolecular coating seemed to enhance the osseointegration by promoting peri-implant bone formation in the early stages of healing. It also seemed to improve histomorphometric analysis and biomechanical testing results. This article reviews the surface modifications of dental implants for the achievement of better success rates. Various methods are used to modify the topography or the chemistry of the implant surfaces which includes acid etching, anodic oxidation, blasting, treatment with fluoride, and calcium phosphate coating. These modifications provide a faster and a stronger osseointegration.1 Recently, hydrophilic properties added to the roughened surfaces or some osteogenic peptides coated on the surfaces shows higher biocompatibility and have induced faster osseointegration compared to the existing modified surfaces. With development in surface engineering techniques, new information on the properties, behaviour, and the reaction of various materials could be discovered which in turn allows the discovery of new materials, modification techniques and design of bio implants for the future. KEY WORDS Dental Implants, Surface Modifications, Biocompatibility, Surface Topography

Self-Assembling Nano-Globular Peptide from Human Lactoferrin Acts as a Systemic Enhancer of Bone Regeneration: A Novel Peptide for Orthopedic Application.

A technology for systemic and repeated administration of osteogenic factors for orthopedic use is an unmet medical need. Lactoferrin (∼80 kDa), present in milk, is known to support bone growth. We discovered a lactoferrin-mimetic peptide, LP2 (an 18-residue fragment from the N-terminus of the N-lobe of human lactoferrin), which self-assembles into a nano-globular assembly with a β-sheet structure in an aqueous environment. LP2 is non-hemolytic and non-cytotoxic against human red blood cells and 3T3 fibroblasts, respectively, and appreciably stable in the human serum. LP2 through the bone morphogenetic protein-dependent mechanism stimulates osteoblast differentiation more potently than the full-length protein as well as the osteoblastic production of osteoprotegerin (an anti-osteoclastogenic factor). Consequently, daily subcutaneous administration of LP2 to rats and rabbits with osteotomy resulted in faster bone healing and stimulated bone formation in rats with a low bone mass more potently than that with teriparatide, the standard-of-care osteogenic peptide for osteoporosis. LP2 has skeletal bioavailability and is safe at the 15× osteogenic dose. Thus, LP2 is a novel peptide that can be administered systemically for the medical management of hard-to-heal fractures.

DNA Hybridization-Based Differential Peptide Display Identified Potential Osteogenic Peptides

A DNA hybridization-based differential peptide display (DPD) was developed for the screening of phage peptide library to find osteogenic peptides intended to bind to epigenetically induced osteogenic receptors on NIH/3T3 (3T3) cell surface. In the presence of DNA methylation inhibitor of 5-azacytidine (5AZC), an osteoblastic receptor of bone morphogenetic protein (BMP) receptor 1A (BMPR1A) was induced on the cell surface of NIH/3T3 fibroblasts. Cyclic heptamer-displaying phage library was screened against vehicle and 5AZC treated (Tx) 3T3 cells. Antisense oligo against library against library peptide coding DNA of control 3T3 cell bound phages were synthesized to subtract common binders from that of 5AZC-Tx 3T3 cell-bound phages that included 5AZC-induced receptor binders. The library peptide coding regions of conformational receptor binder-subtracted DPD were PCR-amplified and cloned into a plasmid vector specifically designed for short peptide expression. No unique binder was identified when 96 clones were randomly picked from the third round of panning against 5AZC-treated 3T3 cells, suggesting miscellaneous bindings to cell surface proteins. Unique binders showing homology to known function proteins were successfully identified when constitutive receptor binders were subtracted from 5AZC-induced protein binders. Some of identified peptides significantly increased alkaline phosphatase activity in 5AZC-Tx 3T3 cells. DPD can be a useful tool to screen functional peptide bindings to cell surface receptors.Graphic

Identification of osteogenic progenitor cell-targeted peptides that augment bone formation

Activation and migration of endogenous mesenchymal stromal cells (MSCs) are critical for bone regeneration. Here, we report a combinational peptide screening strategy for rapid discovery of ligands that not only bind strongly to osteogenic progenitor cells (OPCs) but also stimulate osteogenic cell Akt signaling in those OPCs. Two lead compounds are discovered, YLL3 and YLL8, both of which increase osteoprogenitor osteogenic differentiation in vitro. When given to normal or osteopenic mice, the compounds increase mineral apposition rate, bone formation, bone mass, and bone strength, as well as expedite fracture repair through stimulated endogenous osteogenesis. When covalently conjugated to alendronate, YLLs acquire an additional function resulting in a “tri-functional” compound that: (i) binds to OPCs, (ii) targets bone, and (iii) induces “pro-survival” signal. These bone-targeted, osteogenic peptides are well suited for current tissue-specific therapeutic paradigms to augment the endogenous osteogenic cells for bone regeneration and the treatment of bone loss.

Advanced reconfigurable scaffolds fabricated by 4D printing for treating critical-size bone defects of irregular shapes

While scaffold-based tissue engineering has been widely used to treat bone critical-size defects, challenges such as implantation of scaffolds in defects with irregular shapes and implantation of scaffolds through minimally invasive surgery remain in the tissue engineering field. Customized bioactive bone tissue engineering scaffolds with reconfigurable capability for both easy scaffold implantation and perfect shape fitting in irregularly shaped bone defects are therefore needed. Herein, applying 4D printing, photothermal-responsive shape memory bone tissue engineering scaffolds are constructed by incorporating black phosphorus nanosheets and osteogenic peptide into β-tricalcium phosphate/poly(lactic acid-co-trimethylene carbonate) (TCP/P(DLLA-TMC)) nanocomposite scaffolds. When near-infrared irradiation is applied to customized scaffolds on-demand, scaffold temperature rapidly increases to 45 °C, enabling scaffold shape reconfiguration for easy scaffold implantation and precise fitting in irregular bone defects. Once the implantation is finished, scaffold temperature rapidly decreases to 37 °C and scaffolds display mechanical properties comparable to those of human cancellous bone. The improved osteogenesis in bone defect sites is then initiated through pulsed peptide release from scaffolds. Compact integration of reconfigurable scaffolds in rat cranial bone defects and improved new bone formation are demonstrated through micro-computed tomography and histochemical analyses. This study shows a facile method to clinically treat bone defects of irregular shapes.

Cryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization

Three-dimensional (3D) printing has been increasingly employed to produce advanced bone tissue engineering scaffolds with biomimetic structures and matched mechanical strengths, in order to induce improved bone regeneration in defects with a critical size. Given that the successful bone regeneration requires both excellent osteogenesis and vascularization, endowing scaffolds with both strong bone forming ability and favorable angiogenic potential would be highly desirable to induce improved bone regeneration with required vascularization. In this investigation, customized bone tissue engineering scaffolds with balanced osteoconductivity/osteoinductivity were produced via cryogenic 3D printing of β-tricalcium phosphate and osteogenic peptide (OP) containing water/poly(lactic-co-glycolic acid)/dichloromethane emulsion inks. The fabricated scaffolds had a hierarchically porous structure and were mechanically comparable to human cancellous bone. Angiogenic peptide (AP) containing collagen I hydrogel was then coated on scaffold surface to further provide scaffolds with angiogenic capability. A sequential release with a quick AP release and a slow but sustained OP release was obtained for the scaffolds. Both rat endothelial cells (ECs) and rat bone marrow derived mesenchymal stem cells (MSCs) showed high viability on scaffolds. Improved in vitro migration and angiogenesis of ECs were obtained for scaffolds delivered with AP while enhanced osteogenic differentiation was observed in scaffolds containing OP. The in vivo results showed that, toward scaffolds containing both AP and OP, the quick release of AP induced obvious angiogenesis in vivo, while the sustained OP release significantly improved the new bone formation. This study provides a facile method to produce dual-delivery scaffolds to achieve multiple functions.

Machine learning-guided evolution of BMP-2 knuckle Epitope-Derived osteogenic peptides to target BMP receptor II

Bone morphogenetic protein-2 (BMP-2) is a key regulator of bone formation, growth and regeneration, which contains a conformational wrist epitope and a linear knuckle epitope that are functionally responsible for the protein by mediating its interaction with type-I and type-II receptors, respectively. Previously, a long (19-mer) knuckle peptide derived from the knuckle epitope region (residues 73–92) has been found to promote osteogenesis and bone repair. Here, we attempt to rationally redesign the knuckle peptide by using bioinformatics and machine learning-guided evolution to obtain structurally simplified, potent osteogenic peptides that are capable of targeting type-II receptor. Complex analysis reveals that only a fraction of the epitope region can directly interact with type-II receptor, which represents a small (12-mer) knuckle-derived peptide (KDP0 peptide). Glycine scanning further identifies three KDP0 anchor residues Ser88, Leu90 and Tyr91 that are fundamentally important in the peptide–receptor binding. Systematic mutation, amino acid combination and uniform design of other nine KDP0 non-anchor residues generate 32 new knuckle-derived peptides (KDP1–KDP32); their binding affinities to recombinant protein of human type-II receptor are determined using fluorescence spectroscopy assay. The resulting affinity values (Kd) are used to train six regression models developed by combination of two machine learning methods and three amino acids descriptors. The best SVM/VHSE predictor is then utilised to guide the genetic evolution of a knuckle-derived peptide population. Eight peptides (KDP33–KDP40) with high affinity scores are selected from the improved population, and their osteogenic activities on bone marrow stromal cells are measured using alkaline phosphatase assay. Consequently, six out of the 8 tested peptides exhibit increased activity relative to KDP0 peptide. The KDP34 (DFQTWSFLYVEN) is found as the most potent peptide with APL activities of 195% and 279% at 0.01 and 0.1 µg/ml, respectively, which shares a similar binding mode with the native knuckle epitope and can form diverse nonbonded interactions of hydrogen bond, hydrophobic contact, cation-π/π-π stacking and salt bridge with type-II receptor.