Expression Of Osteogenic Marker Genes Research Articles

Pretreatment of Mesenchymal Stem Cells with Electrical Stimulation as a Strategy to Improve Bone Tissue Engineering Outcomes.

Electrical stimulation (EStim), whether used alone or in combination with bone tissue engineering (BTE) approaches, has been shown to promote bone healing. In our previous in vitro studies, mesenchymal stem cells (MSCs) were exposed to EStim and a sustained, long-lasting increase in osteogenic activity was observed. Based on these findings, we hypothesized that pretreating MSC with EStim, in 2D or 3D cultures, before using them to treat large bone defects would improve BTE treatments. Critical size femur defects were created in 120 Sprague-Dawley rats and treated with scaffold granules seeded with MSCs that were pre-exposed or not (control group) to EStim 1 h/day for 7 days in 2D (MSCs alone) or 3D culture (MSCs + scaffolds). Bone healing was assessed at 1, 4, and 8 weeks post-surgery. In all groups, the percentage of new bone increased, while fibrous tissue and CD68+ cell count decreased over time. However, these and other healing features, like mineral density, bending stiffness, the amount of new bone and cartilage, and the gene expression of osteogenic markers, did not significantly differ between groups. Based on these findings, it appears that the bone healing environment could counteract the long-term, pro-osteogenic effects of EStim seen in our in vitro studies. Thus, EStim seems to be more effective when administered directly and continuously at the defect site during bone healing, as indicated by our previous studies.

Alginate hydrogels containing different concentrations of magnesium-containing poly(lactic-co-glycolic acid) microspheres for bone tissue engineering

The easy loss of crosslinking ions in alginate can result in structural collapse and loss of its characteristics as a bone scaffold. A novel injectable tissue engineering scaffold containing poly(lactic-co-glycolic acid) (PLGA) microspheres and alginate was fabricated to improve alginate’s physiochemical and biological properties. MgCO3 and MgO were loaded at a 1:1 ratio into PLGA microspheres to form biodegradable PLGA microspheres containing magnesium (PMg). Subsequently, different concentrations of PMg were mixed into a Ca2+ suspension and employed as crosslinking agents for an alginate hydrogel. A pure Ca2+ suspension was used as the alginate crosslinking agent in the control group. The influence of PMg on the physiochemical properties of the injectable scaffolds, including the surface morphology, degradation rate, Mg2+ precipitation concentration, and the swelling rate, was investigated. MC3T3-E1 cells were seeded onto the hydrogels to evaluate the effect of the resultant alginate on osteoblastic attachment, proliferation, and differentiation. The physicochemical properties of the hydrogels, including morphology, degradation rate, and swelling ratio, were effectively tuned by PMg. Inductively coupled plasma-optical emission spectroscopy results showed that, in contrast to those in pure PMg, the magnesium ions (Mg2+) in alginate hydrogel containing PMg microspheres (Alg-PMg) were released in a dose-dependent and slow-releasing manner. Additionally, Alg-PMg with an appropriate concentration of PMg not only improved cell attachment and proliferation but also upregulated alkaline phosphatase activity, gene expression of osteogenic markers, and related growth factors. These findings indicate that PMg incorporation can regulate the physicochemical properties of alginate hydrogels. The resultant hydrogel promoted cell attachment, matrix mineralization, and bone regeneration. The hydrogel described in this study can be considered a promising injectable scaffold for bone tissue engineering.

Mechanical and Functional Improvement of β-TCP Scaffolds for Use in Bone Tissue Engineering.

Autologous bone transplantation is still considered as the gold standard therapeutic option for bone defect repair. The alternative tissue engineering approaches have to combine good hardiness of biomaterials whilst allowing good stem cell functionality. To become more useful for load-bearing applications, mechanical properties of calcium phosphate materials have to be improved. In the present study, we aimed to reduce the brittleness of β-tricalcium phosphate (β-TCP). For this purpose, we used three polymers (PDL-02, -02a, -04) for coatings and compared resulting mechanical and degradation properties as well as their impact on seeded periosteal stem cells. Mechanical properties of coated and uncoated β-TCP scaffolds were analyzed. In addition, degradation kinetics analyses of the polymers employed and of the polymer-coated scaffolds were performed. For bioactivity assessment, the scaffolds were seeded with jaw periosteal cells (JPCs) and cultured under untreated and osteogenic conditions. JPC adhesion/proliferation, gene and protein expression by immunofluorescent staining of embedded scaffolds were analyzed. Raman spectroscopy measurements gave an insight into material properties and cell mineralization. PDL-coated β-TCP scaffolds showed a significantly higher flexural strength in comparison to that of uncoated scaffolds. Degradation kinetics showed considerable differences in pH and electrical conductivity of the three different polymer types, while the core material β-TCP was able to stabilize pH and conductivity. Material differences seemed to have an impact on JPC proliferation and differentiation potential, as reflected by the expression of osteogenic marker genes. A homogenous cell colonialization of coated and uncoated scaffolds was detected. Most interesting from a bone engineer's point of view, the PDL-04 coating enabled detection of cell matrix mineralization by Raman spectroscopy. This was not feasible with uncoated scaffolds, due to intercalating effects of the β-TCP material and the JPC-formed calcium phosphate. In conclusion, the use of PDL-04 coating improved the mechanical properties of the β-TCP scaffold and promoted cell adhesion and osteogenic differentiation, whilst allowing detection of cell mineralization within the ceramic core material.

Astragalus polysaccharide promotes osteogenic differentiation of human bone marrow derived mesenchymal stem cells by facilitating ANKFY1 expression through miR-760 inhibition.

Astragalus polysaccharide (APS) participates in various processes, such as the enhancement of immunity and inhibition of tumours. APS can affect osteoporosis (OP) by regulating the osteogenic differentiation of human bone mesenchymal stem cells (hBMSCs). This study was designed to elucidate the mechanism of APS in hBMSC proliferation and osteoblast differentiation. Reverse transcriptase polymerase chain reaction (RT-PCR) and Western blotting were performed to determine the expression of microRNA (miR)-760 and ankyrin repeat and FYVE domain containing 1 (ANKFY1) in OP tissues and hBMSCs. Cell viability was measured using the Cell Counting Kit-8 assay. The expression of cyclin D1 and osteogenic marker genes (osteocalcin (OCN), alkaline phosphatase (ALP), and runt-related transcription factor 2 (RUNX2)) was evaluated using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). Mineral deposits were detected through Alizarin Red S staining. In addition, Western blotting was performed to detect the ANKFY1 protein levels following the regulation of miR-760. The relationship between miR-760 and ANKFY1 was determined using a luciferase reporter assay. The expression of miR-760 was upregulated in OP tissues, whereas ANKFY1 expression was downregulated. APS stimulated the differentiation and proliferation of hBMSCs by: increasing their viability; upregulating the expression levels of cyclin D1, ALP, OCN, and RUNX2; and inducing osteoblast mineralization. Moreover, APS downregulated the expression of miR-760. Overexpression of miR-760 was found to inhibit the promotive effect of APS on hBMSC differentiation and proliferation, while knockdown of miR-760 had the opposite effect. ANKFY1 was found to be the direct target of miR-760. Additionally, ANKFY1 participated in the APS-mediated regulation of miR-760 function in hBMSCs. APS promotes the osteogenic differentiation and proliferation of hBMSCs. Moreover, APS alleviates the effects of OP by downregulating miR-760 and upregulating ANKFY1 expression.

Effect of rapamycin on human periodontal ligament stem cells that have been exposed to sodium hypochlorite

AimsThe present study investigated the effect of rapamycin on the viability and osteogenic differentiation potential of human periodontal ligament stem cells (hPDLSCs) in the presence of sodium hypochlorite (NaOCl). Main methodsAfter determining the minimum inhibitory concentration of NaOCl and optimum concentration of rapamycin, the viability of hPDLSCs was evaluated using the MTT assay subsequent to their exposure to NaOCl, rapamycin, or a combination of both. Osteogenic differentiation was evaluated by the cell mineralization assay performed by alizarin red S staining, alkaline phosphatase activity, and monitoring the expression of osteogenic genes markers Runt-related transcription factor 2, osteocalcin, and osteoprotegerin, using real-time quantitative polymerase chain reaction (RT-qPCR). The expression of autophagy-related genes PI3K, Akt, and mTOR, was also analyzed with RT-qPCR. Key findingsStem cells treated with rapamycin showed the highest percentage of viable cells in the presence of NaOCl. The same trend was observed for all osteogenic differentiation assays. The hPDLSCs treated with rapamycin demonstrated the highest calcium nodule deposition, alkaline phosphatase activity, and the expression of osteogenic gene markers. These effects were not adversely affected by the presence of NaOCl. Rapamycin significantly inhibited mTOR gene expression, while there were no differences in the gene expression of PI3K and Akt. SignificanceRapamycin counteracts the cytotoxic effect of NaOCl by enhancing the viability and osteogenic differentiation potential of hPDLSCs. Rapamycin appears to accomplish these processes via autophagy activation, by inhibiting mTOR gene expression. The incorporation of rapamycin in regenerative endodontic therapy may encourage a higher success rate.

An engineered biomaterial to harness the differentiation potential of endogenous human gingival mesenchymal stem cells (hGMSCs)

Here, we developed a stromal cell-derived factor-1a (SDF-1α) delivery biomaterial as an artificial polymeric-based niche with the ability to recruit local endogenous human gingival mesenchymal stem cells (hGMSCs) for craniofacial bone regeneration applications. Polydopamine-coated poly(ε-caprolactone) (PCL)-Gelatin electrospun membranes were loaded with stromal cell-derived factor-1α (SDF-1α) via physical adsorption. Subsequently, the release profile of the SDF-1α and chemotactic capacity on human bone marrow mesenchymal stem cells (hBMMSCs) and hGMSCs were evaluated. The osteogenic differentiation capacity of the recruited MSCs was also assessed in vitro. Our results confirmed the sustainable release of SDF-1α from the developed biomaterial promoting the migration and homing of human bone marrow mesenchymal stem cells (hBMMSCs) and hGMSCs. Moreover, the results of the osteogenic differentiation assay showed that SDF-1α delivery significantly enhanced osteogenic differentiation of hBMMSCs and hGMSCs and up-regulated the gene expression of osteogenic markers compared to the control group. In conclusion, the current study successfully developed a novel and effective treatment modality for craniofacial bone regeneration by recruiting the autogenous progenitor cells including hGMSCs. The developed niches can potentially lead to the development of a novel platform for targeted manipulation of in vivo microenvironment to achieve efficient and safe craniofacial cell reprogramming, which also will pave the road to determine the capacity of local hGMSCs' contribution to in situ bone regeneration.

Diamond-like carbon (DLC)-coated titanium surface inhibits bacterial growth and modulates human alveolar bone cell responses in vitro

Modifying the titanium alloy (Ti-6Al-4V) surface plays a key role in improving biological responses. The present work aimed to determine the response of human alveolar bone cells to the diamond-like carbon (DLC) film and to evaluate the antibacterial effect of DLC-coated titanium. The alloys were deposited with different compositions, including C2H2 (DLC), carbon tetrafluoride (CF4:C2H2; F-DLC), and tetramethylsilane (Si(CH3)4:C2H2; Si-DLC). The surface morphology and wettability were measured using an atomic force microscopy (AFM) and a contact angle measurement. Titanium coated with DLC, F-DLC, or Si-DLC increased surface roughness and hydrophobicity. The ratio of spreading cells to initial rounded attaching cells at 20 min of all modified surfaces was higher than that of the control surfaces. F-DLC showed better cell spreading at 20 min compared to other conditions, as observed by scanning electron microscopy (SEM). The DLC, F-DLC, and Si-DLC coating significantly promoted cell proliferation compared to the Ti-6Al-4V control surfaces. ALP mRNA expression was significantly reduced on DLC surfaces compared to the control on day 14. Additionally, ALP and BMP2 mRNA expression increased on F-DLC-coated surfaces, but there were no statistically significant differences. However, DLC surfaces promoted higher mineral deposition than the control. The lower Staphylococcus aureus colony was observed on the surface of the DLC and F-DLC. In conclusion, the DLC-modified Ti-4Al-6V surface modulates cell attachment, proliferation, osteogenic marker gene expression, and bacterial growth. Herein, DLC-coated titanium alloys are still needed for continued development as an alternative biomaterial in dental applications.

The Self-assembling peptide P11-4 influences viability and osteogenic differentiation of stem cells of the apical papilla (SCAP)

ObjectiveTo analyze the effect of P11–4 self-assembly peptide on cell viability and osteogenic capacity of SCAPs through mineral deposition and gene expression of osteogenic markers. MethodsSCAPs were seeded in contact with P11–4 (10 µg/ml, 100 µg/ml and 1 mg/ml) solution. Cell viability was evaluated using a colorimetric assay MTT: 3-(4,5-dimethyl-thiazolyl-2)-2,5- diphenyltetrazolium bromide) in an experimental time of 24, 48 and 72 h (n = 7). Mineral deposition and quantification provided by the cells was tested using the Alizarin Red staining and Cetylpyridinium Chloride (CPC), respectively, after 30 days (n = 4). Gene expression of Runt-related transcription factor 2 (RUNX2), Alkaline phosphatase (ALP) and Osteocalcin (OCN) was quantified using quantitative polymerase chain reaction (RT-qPCR), at 3 and 7 days with Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) as the housekeeping gene, and relative gene expression was measured using the ΔΔCq method. Data were analyzed using Kruskall-Wallis followed by multiple comparisons, and T-test for gene expression with α=0.05. ResultsAll tested concentrations (10 µg/ml, 100 µg/ml and 1 mg/ml) were not cytotoxic at time 24 and 48 h. After 72 h, a slight decrease in cell viability was observed for the lowest concentration (10 µg/ml). The concentration of 100 µg/ml P11–4 showed the highest mineral deposition. However, qPCR analysis of P11–4 (10 µg/ml) showed upregulation of RUNX2 and OCN at 3 days, with downregulation of ALP at 3 and 7d ConclusionP11–4 did not affect cell viability, induced mineral deposition in SCAPs, and upregulated the expression of RUNX2 and OCN genes at 3 days, while downregulating ALP expression at 3 and 7 days. Clinical significanceBased on the results obtained in this study it can be stated that self-assembling peptide P11–4 is a potential candidate to induce mineralization on dental stem cells for regenerative purposes and also for a clinical use as a capping agent without compromising the cells health.

Osteogenic Potential and Bioactive Profiles of Piper sarmentosum Ethanolic Extract-Treated Stem Cells.

Piper sarmentosum is a well-known traditional herbal plant in various diseases treatments. Multiple scientific studies have also reported various biological activities exhibited by the plant's extract, such as antimicrobial, anticarcinogenic and antihyperglycemic activities, and, in addition, a bone protective effect in ovariectomized rats has been reported. However, no known Piper sarmentosum extract is involved in osteoblast differentiation using stem cells. Our study aims to identify the potential of P. sarmentosum ethanolic extract to induce osteoblast differentiation of human peripheral blood stem cells. Prior to the assay, the proliferation ability of the cells was observed for 14 days and the presence of hematopoietic stem cells in the culture was determined by the expression of SLAMF1 and CD34 genes. During the differentiation assay, the cells were treated with P. sarmentosum ethanolic extract for 14 days. Osteoblast differentiation was examined using an (alkaline phosphatase) ALP assay, by monitoring the expression of osteogenic gene markers and by von Kossa staining. The untreated cells served as the negative control, while cells treated with 50 µg/mL ascorbic acid and 10 mM β-glycerophosphate acted as the positive control. Finally, the determination of the compound profile was performed using a gas chromatography-mass spectrometry (GC-MS) analysis. The isolated cells were able to proliferate for 14 days during the proliferation assay. The expression of hematopoietic stem cell markers was also upregulated during the 14 days assay. Following the differentiation induction, the ALP activity exhibited a significant increase (p < 0.05) from day 3 of the differentiation assay. A molecular analysis also showed that the osteogenic markers ALP, RUNX2, OPN and OCN were upregulated compared to the positive control. The presence of mineralized cells with a brownish-stained morphology was observed, indicating the mineralization process increased in a time-dependent manner regardless of the concentration used. There were 54 compounds observed in the GC-MS analysis, including β-asarones, carvacrol and phytol, which have been shown to possess osteoinductive capacities. Our results demonstrate that the ethanolic extract of P. sarmentosum can induce osteoblast differentiation of peripheral blood stem cells. The extract contains potent compounds which can potentially induce the differentiation of bone cells, i.e., osteoblasts.

Family with sequence similarity 20 member B regulates osteogenic differentiation of bone marrow mesenchymal stem cells on titanium surfaces.

Successful bone regeneration on titanium (Ti) surfaces is a key process in dental implant treatment. Bone marrow mesenchymal stem cells (BMSCs) are fundamental cellular components of this process, and their early recruitment, proliferation, and differentiation into bone-forming osteoblasts are crucial. A proteoglycan (PG)-rich layer has been reported to exist between Ti surfaces and bones; however, the molecules that could potentially affect the formation of this layer remain unknown. Family with sequence similarity 20 member B (FAM20B) is a newly identified kinase that regulates the synthesis of glycosaminoglycans, an important component of the PG-rich layer. Because FAM20B is also closely associated with bone development, in this study, we examined the function of FAM20B in osteogenic differentiation of BMSCs on Ti surfaces. For this, BMSC cell lines with knocked down FAM20B (shBMSCs) were cultured on Ti surfaces. The results showed that the depletion of FAM20B reduced the formation of a PG-rich layer between the Ti surfaces and cells. The shBMSCs exhibited downregulated expression of osteogenic marker genes (ALP and OCN) and decreased mineral deposition. Moreover, shBMSCs reduced the molecular levels of p-ERK1/2, which plays an important role in MSC osteogenesis. The nuclear translocation of RUNX2, an important transcription factor for osteogenic differentiation, on the Ti surfaces is inhibited by the depletion of FAM20B in BMSCs. Moreover, the depletion of FAM20B reduced the transcriptional activity of RUNX2, which is important in regulating the expression of osteogenic genes. STATEMENT OF SIGNIFICANCE: : Bone healing and regeneration on implanted titanium surfaces is a cell-material interaction. Such an interaction is enabled by bone marrow mesenchymal stem cells (BMSCs), and their early recruitment, proliferation, and differentiation into bone-forming osteoblasts are essential for bone healing and osseointegration. In this study, we found that the family with sequence similarity 20-B influenced the formation of a proteoglycan rich layer between BMSCs and the titanium surface and regulated the differentiation of BMSCs into bone-forming osteoblasts. We believe that our study contributes significantly to the further exploration of bone healing and osseointegration mechanisms on implanted titanium surfaces.

The addition of zinc ions to polymer-ceramic composites accelerated osteogenic differentiation of human mesenchymal stromal cells

Critical-sized bone defects, caused by congenital disorders or trauma, are defects that will not heal spontaneously and require surgical intervention. Recent advances in biomaterial design for the treatment of such defects focus on improving their osteoinductive properties. Here, we propose a bioactive composite with high ceramic content composed of poly(ethyleneoxide terephthalate)/poly(butylene terephthalate) (1000PEOT70PBT30, PolyActive, PA) and 50 % beta-tricalcium phosphate (β-TCP) with the addition of zinc in a form of a coating on the TCP particles. Due to its essential role in bone homeostasis, we hypothesised that the addition of zinc to the polymer-ceramic composite will further enhance its osteogenic properties. β-TCP particles were immersed in a zinc solution with a concentration of 15 or 45 mM. The addition of zinc did not alter the β-TCP composition or the release of calcium or phosphate ions. 3D porous 1000PEOT70PBT30 - β-TCP scaffolds were additively manufactured by “3D fibre deposition” and their ability to support the osteogenic differentiation was assessed by culturing clinically relevant human mesenchymal stromal cells (hMSCs) on the scaffolds for 3, 7, 14 and 28 days. The expression of osteogenic gene markers was increased in the presence of both zinc concentrations. Remarkably, upregulation of osteocalcin (OCN), a late osteogenic marker, was observed after three days of culture. Furthermore, enhanced extracellular matrix (ECM) production and mineralization was observed. These findings support the existing evidence on the osteogenic properties of zinc and further demonstrate that the incorporation of zinc into a polymer-ceramic composite could be a promising strategy in the field of regeneration of critical-sized bone defects.

METTL14 alleviates the development of osteoporosis in ovariectomized mice by upregulating m6A level of SIRT1 mRNA.

The purpose of this study was to investigate whether METTL14 participated in ovariectomized (OVX)-induced osteoporosis (OP) in mice by regulating the m6A level of SIRT1 mRNA. OVX was performed on mice to induce OP, and mouse bone marrow stromal cells (BMSCs) and bone marrow mononuclear macrophages (BMMs) were isolated to induce osteoblast differentiation and osteoclast differentiation, respectively. The morphology of bone trabeculae was evaluated under a micro-CT scanner. The changes in pathology of bone tissues were observed through staining using hematoxylin-eosin. The number of osteoclasts was measured by tartrate-resistant acid phosphatase staining, and the content of serum calcium, PINP, and CTX-I was tested by enzyme-linked immunosorbent assay, accompanied by the measurement of the expression of SIRT1, METTL14, osteogenic marker genes, and osteoclast marker genes. The m6A modification level of SIRT1 and the binding between METTL14 and SIRT1 were verified. In OVX mice, SIRT1 and METTL14 were downregulated. Overexpression of SIRT1 or METTL14 increased the expression of osteogenic marker genes but decreased the expression of osteoclast marker genes. Additionally, METTL14 overexpression increased m6A level of SIRT1 mRNA. Furthermore, overexpression of METTL14 promoted osteoblast differentiation and suppressed osteoclast differentiation, which were reversed by knockdown of SIRT1. METTL14 promoted osteoblast differentiation and repressed osteoclast differentiation by m6A-dependent upregulation of SIRT1 mRNA, thereby alleviating OP development.

Modulation of Osteogenic Gene Expression by Human Osteoblasts Cultured in the Presence of Bisphenols BPF, BPS, or BPAF

Bone effects attributed to bisphenols (BPs) include the inhibition of growth and differentiation. This study analyzes the effect of BPA analogs (BPS, BPF, and BPAF) on the gene expression of the osteogenic markers RUNX2, osterix (OSX), bone morphogenetic protein-2 (BMP-2), BMP-7, alkaline phosphatase (ALP), collagen-1 (COL-1), and osteocalcin (OSC). Human osteoblasts were obtained by primary culture from bone chips harvested during routine dental work in healthy volunteers and were treated with BPF, BPS, or BPAF for 24 h at doses of 10-5, 10-6, and 10-7 M. Untreated cells were used as controls. Real-time PCR was used to determine the expression of the osteogenic marker genes RUNX2, OSX, BMP-2, BMP-7, ALP, COL-1, and OSC. The expression of all studied markers was inhibited in the presence of each analog; some markers (COL-1; OSC, BMP2) were inhibited at all three doses and others only at the highest doses (10-5 and 10-6 M). Results obtained for the gene expression of osteogenic markers reveal an adverse effect of BPA analogs (BPF, BPS, and BPAF) on the physiology of human osteoblasts. The impact on ALP, COL-1, and OSC synthesis and therefore on bone matrix formation and mineralization is similar to that observed after exposure to BPA. Further research is warranted to determine the possible contribution of BP exposure to the development of bone diseases such as osteoporosis.

Transcriptomic Changes toward Osteogenic Differentiation of Mesenchymal Stem Cells on 3D-Printed GelMA/CNC Hydrogel under Pulsatile Pressure Environment.

Biomimetic soft hydrogels used in bone tissue engineering frequently produce unsatisfactory outcomes. Here, it is investigated how human bone-marrow-derived mesenchymal stem cells (hBMSCs) differentiated into early osteoblasts on remarkably soft 3D hydrogel (70 ± 0.00049Pa). Specifically, hBMSCs seeded onto cellulose nanocrystals incorporated methacrylate gelatin hydrogels are subjected to pulsatile pressure stimulation (PPS) of 5-20kPa for 7 days. The PPS stimulates cellular processes such as mechanotransduction, cytoskeletal distribution, prohibition of oxidative stress, calcium homeostasis, osteogenic marker gene expression, and osteo-specific cytokine secretions in hBMSCs on soft substrates. The involvement of Piezo 1 is the main ion channel involved in mechanotransduction. Additionally, RNA-sequencing results reveal differential gene expression concerning osteogenic differentiation, bone mineralization, ion channel activity, and focal adhesion. These findings suggest a practical and highly scalable method for promoting stem cell commitment to osteogenesis on soft matrices for clinical reconstruction.

Synthesis of amide derivatives of 3-aryl-3H-benzopyrans as osteogenic agent concomitant with anticancer activity

The present study reports a series of 3-aryl-3H-benzopyran-based amide derivatives as osteogenic agents concomitant with anticancer activity. Six target compounds viz 22e, 22f, 23i, and 24b-d showed good osteogenic activity at 1 pM and 100 pM concentrations. One of the potential molecules, 24b, effectively induced ALP activity and mRNA expression of osteogenic marker genes at 1 pM and bone mineralization at 100 pM concentrations. These molecules also presented significant growth inhibition of osteosarcoma (MG63) and estrogen-dependent and -independent (MCF-7 and MDA-MB-231) breast cancer cells. The most active compound, 24b, inhibited the growth of all the cancer cells within the IC50 10.45–12.66 µM. The mechanistic studies about 24b showed that 24b induced apoptosis via activation of the Caspase-3 enzyme and inhibited cancer cell migration. In silico molecular docking performed for 24b revealed its interaction with estrogen receptor-β (ER-β) preferentially.

Standard in vitro evaluations of engineered bone substitutes are not sufficient to predict in vivo preclinical model outcomes.

Understanding the optimal conditions required for bone healing can have a substantial impact to target the problem of non-unions and large bone defects. The combination of bioactive factors, regenerative progenitor cells and biomaterials to form a tissue engineered (TE) complex is a promising solution but translation to the clinic has been slow. We hypothesized the typical material testing algorithm used is insufficient and leads to materials being mischaracterized as promising. In the first part of this study, human bone marrow - derived mesenchymal stromal cells (hBM-MSCs) were embedded in three commonly used biomaterials (hyaluronic acid methacrylate, gelatin methacrylate and fibrin) and combined with relevant bioactive osteogenesis factors (dexamethasone microparticles and polyphosphate nanoparticles) to form a TE construct that underwent in vitro osteogenic differentiation for 28 days. Gene expression of relevant transcription factors and osteogenic markers, and von Kossa staining were performed. In the second and third part of this study, the same combination of TE constructs were implanted subcutaneously (cell containing) in T cell-deficient athymic Crl:NIH-Foxn1rnu rats for 8 weeks or cell free in an immunocompetent New Zealand white rabbit calvarial model for 6 weeks, respectively. Osteogenic performance was investigated via MicroCT imaging and histology staining. The in vitro study showed enhanced upregulation of relevant genes and significant mineral deposition within the three biomaterials, generally considered as a positive result. Subcutaneous implantation indicates none to minor ectopic bone formation. No enhanced calvarial bone healing was detected in implanted biomaterials compared to the empty defect. The reasons for the poor correlation of in vitro and in vivo outcomes are unclear and needs further investigation. This study highlights the discrepancy between in vitro and in vivo outcomes, demonstrating that in vitro data should be interpreted with extreme caution. In vitro models with higher complexity are necessary to increase value for translational studies. STATEMENT OF SIGNIFICANCE: Preclinical testing of newly developed biomaterials is a crucial element of the development cycle. Despite this, there is still significant discrepancy between in vitro and in vivo test results. Within this study we investigate multiple combinations of materials and osteogenic stimulants and demonstrate a poor correlation between the in vitro and in vivo data. We propose rationale for why this may be the case and suggest a modified testing algorithm.

Electrically Polarized Withaferin A and Alginate-Incorporated Biphasic Calcium Phosphate Microspheres Exhibit Osteogenicity and Antibacterial Activity In Vitro.

Biphasic calcium phosphate microspheres were synthesized by the water on oil emulsion method and, subsequently, withaferin A was incorporated in the microspheres to evaluate their efficacy in biomedical applications. These withaferin A and alginate-incorporated biphasic calcium phosphate (BCP-WFA-ALG) microspheres were then negatively polarized, and the formation of biphasic calcium phosphates was validated by X-ray diffraction study. Although the TSDC measurement of the BCP-WFA-ALG microspheres showed the highest current density of 5.37 nA/cm2, the contact angle of the specimen was found to be lower than the control BCP microspheres in all the media. The water uptake into BCP-WFA-ALG microspheres was significantly higher than in the pure BCP microspheres. MTT assay results showed that there was a significant enhancement in cell proliferation rate with the BCP-WFA-ALG composite microspheres. The osteogenic differentiation of MG 63 cells on BCP-WFA-ALG microspheres exhibited an increased expression of osteogenic marker genes in the case of the BCP-WFA-ALG composite microspheres.

Functional expression of oxytocin receptors in pulp-dentin complex

Dental pulp-derived stromal cells (DPSCs) are a crucial cell population for maintaining the tissue integrity of the pulp-dentin complex. The oxytocin receptor (OXTR), a member of the G protein-coupled receptor (GPCR) superfamily, plays versatile roles in diverse biological contexts. However, the role of OXTR in dental pulp has not yet been fully understood. Here, we demonstrate the biological functions and significance of OXTR in DPSCs through a multidisciplinary approach. Microarray data of 494 GPCR genes revealed high OXTR expression in human DPSCs (hDPSCs). Blocking OXTR activity increased the expression of osteogenic and odontogenic marker genes, promoting hDPSC differentiation. Additionally, we found that OXTR is involved in extracellular matrix (ECM) remodeling through the regulation of the gene expression related to ECM homeostasis. We further demonstrated that these genetic changes are mediated by trascriptional activity of Yes-associated protein (YAP). Based on the results, a preclinical experiment was performed using an animal model, demonstrating that the application of an OXTR inhibitor to damaged pulp induced significant hard tissue formation. These results provide new insight into the oxytocin-OXTR system in the regenerative process of pulp-dentin complex.

Tideglusib enhances odontogenic differentiation in human dental pulp stem cells in vitro.

Tideglusib is a small molecule agonist of the canonical Wnt pathway. The present study investigated the influence of Tideglusib on human dental pulp stem cell (hDPSC) proliferation, apoptosis, migration and odonto/osteogenic differentiation. hDPSCs were treated with 50, 100 nM or 200 nM Tideglusib. β-catenin accumulation was detected by immunofluorescence staining. Colony-forming unit ability was assessed by staining with Coomassie blue. Cell cycle progression and cell apoptosis were investigated using flow cytometry. Cell migration was examined using an in vitro wound-healing assay. Osteogenic differentiation was examined using alkaline phosphatase (ALP) staining, alizarin red S staining and osteogenic-related gene expression. The gene expression profile was examined using a high-throughput RNA sequencing technique. All experiments were repeated using cells derived from at least four different donors (n=4). The Mann-Whitney U-test was used to identify significant differences between two independent group comparisons. For three or more group comparisons, statistical differences were assessed using the Kruskal-Wallis test followed by pairwise comparison. The significance level was set at 5% (p < .05). Tideglusib activated the Wnt signalling pathway in hDPSCs as demonstrated by an increase in cytoplasmic β-catenin accumulation and nuclear translocation. Tideglusib did not affect hDPSC proliferation, cell cycle progression, cell apoptosis or cell migration. In contrast, 50 and 100 nM Tideglusib significantly enhanced mineralization and osteogenic marker gene expression (RUNX2, ALP, BMP2 and DSPP; p < .05). Tideglusib enhanced the odonto/osteogenic differentiation of hDPSCs. Therefore, incorporating this bioactive molecule in a pulp-capping material could be a promising strategy to promote dentine repair.

Stimulation of MSCs Osteogenic Differentiation on a Micro/ Nanofibrous Scaffold Using Mechanical Stimulation in the Perfusion Bioreactor

In tissue engineering, the 3D constructs seeded with cells tested in vitro in static conditions suffer from poor cellular penetration and non-homogenous matrix deposition, due to the insufficient flow of nutrients, gases and signal molecules through the scaffold volume. However, a dynamic culture of cells can improve these drawbacks and simulate physiological conditions, such as flow in the canalicular system of bones. The purpose of this comparative study was to evaluate the different flow rates of 1 and 3 mL/min of perfusion bioreactor on human mesenchymal stromal cells (hMSCs), seeded in an osteogenic media on 3D porous constructs. After three weeks of dynamic cultivation, the metabolic activity and proliferation of the cells was evaluated, as well as the alkaline phosphatase (ALP) activity and the expression of bone related genes, RunX2, collagen type I and osteocalcin. The dynamic culture conditions did not influence the metabolic activity of hMSCs. The highest cell proliferation was detected on the scaffold cultured at a flow rate of 3 mL/min. The dynamic culture did not prove the penetration of cells into the scaffold's volume. The ALP activity, and PCR analysis of osteogenic markers RunX2 and collagen type I were highest on the scaffolds cultured at 1 mL/min, compared to the static culture and even to the dynamic culture at 3 mL/min. The study shows that hMSCs behave differently in different flow rates. While the higher flow rate (3 mL/min, shear stress 479 mPa) improved cell proliferation, the slower flow rate of 1 mL/min (shear stress 160 mPa) supported the ALP activity and expression of osteogenic marker genes. Interestingly, our expectation that dynamic culture improves cell penetration into the scaffold was not proved.&#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D; &#x0D;