Stem Cell Osteogenic Differentiation Research Articles

Insights into the Structure and Function of TRIP-1, a Newly Identified Member in Calcified Tissues.

Eukaryotic initiation factor subunit I (EIF3i), also called as p36 or TRIP-1, is a component of the translation initiation complex and acts as a modulator of TGF-β signaling. We demonstrated earlier that this intracellular protein is not only exported to the extracellular matrix via exosomes but also binds calcium phosphate and promotes hydroxyapatite nucleation. To assess other functional roles of TRIP-1, we first examined their phylogeny and showed that it is highly conserved in eukaryotes. Comparing human EIF3i sequence with that of 63 other eukaryotic species showed that more than 50% of its sequence is conserved, suggesting the preservation of its important functional role (translation initiation) during evolution. TRIP-1 contains WD40 domains and predicting its function based on this structural motif is difficult as it is present in a vast array of proteins with a wide variety of functions. Therefore, bioinformatics analysis was performed to identify putative regulatory functions for TRIP-1 by examining the structural domains and post-translational modifications and establishing an interactive network using known interacting partners such as type I collagen. Insight into the function of TRIP-1 was also determined by examining structurally similar proteins such as Wdr5 and GPSß, which contain a ß-propeller structure which has been implicated in the calcification process. Further, proteomic analysis of matrix vesicles isolated from TRIP-1-overexpressing preosteoblastic MC3T3-E1 cells demonstrated the expression of several key biomineralization-related proteins, thereby confirming its role in the calcification process. Finally, we demonstrated that the proteomic signature in TRIP1-OE MVs facilitated osteogenic differentiation of stem cells. Overall, we demonstrated by bioinformatics that TRIP-1 has a unique structure and proteomic analysis suggested that the unique osteogenic cargo within the matrix vesicles facilitates matrix mineralization.

Enhancing osteoinduction and bone regeneration of biphasic calcium phosphate scaffold thought modulating the balance between pro-osteogenesis and anti-osteoclastogenesis by zinc doping

Biphasic calcium phosphate (BCP) is a promising bone regeneration material with an adjustable degradation rate, and ions doping is an effective method to improve its bone repair effect. However, few studies have focused on the role of ions doping-mediated osteogenesis and osteoclastogenesis balance in bone regeneration. In order to improve the bone repair effect of BCP and emphasize the role of osteogenesis and osteoclastogenesis balance regulated by ions doping to promote bone regeneration. Here, zinc (Zn), an essential trace element with pro-osteogenesis and anti-osteoclastogenesis, was dopped into BCP scaffolds, and its effects on the physicochemical properties, in vitro cytological responses, in vivo osteoinduction, and bone defect regeneration of BCP were systematically investigated. Results showed that Zn was successfully introduced into the crystal lattice of BCP. The differentiation of both osteoblasts and osteoclasts showed a doping content-dependent behavior. By increasing the doping content (0–5 mol.%), the anti-osteoclastogenesis effect of BCP gradually increased, while its pro-osteogenesis performance first increased and then decreased. ThoughBCP with a doping content of 5 mol.% could promote osteogenic differentiation of stem cells and reduced fibrous capsule encapsulation, it could not enhance ectopic bone formation or bone regeneration due to its excessive anti-osteoclastogenesis. BCP with a doping content of 2.5 mol.% remarkably enhanced the osteoinduction activity and accelerated new bone formation, which were associated with its highest pro-osteogenesis and appropriate anti-osteoclastogenesis activity. This study highlights on regulating the balance between pro-osteogenesis and anti-osteoclastogenesis by Zn doping and paves the way for the development of a more osteoinductive calcium phosphate-based material for bone regeneration.

Nanostructure Mediated Piezoelectric Effect of Tetragonal BaTiO3 Coatings on Bone Mesenchymal Stem Cell Shape and Osteogenic Differentiation.

In recent years, porous titanium (Ti) scaffolds with BaTiO3 coatings have been designed to promote bone regeneration. However, the phase transitions of BaTiO3 have been understudied, and their coatings have yielded low effective piezoelectric coefficients (EPCs < 1 pm/V). In addition, piezoelectric nanomaterials bring many advantages in eliciting cell-specific responses. However, no study has attempted to design a nanostructured BaTiO3 coating with high EPCs. Herein, nanoparticulate tetragonal phase BaTiO3 coatings with cube-like nanoparticles but different effective piezoelectric coefficients were fabricated via anodization combining two hydrothermal processes. The effects of nanostructure-mediated piezoelectricity on the spreading, proliferation, and osteogenic differentiation of human jaw bone marrow mesenchymal stem cells (hJBMSCs) were explored. We found that the nanostructured tetragonal BaTiO3 coatings exhibited good biocompatibility and an EPC-dependent inhibitory effect on hJBMSC proliferation. The nanostructured tetragonal BaTiO3 coatings of relatively smaller EPCs (<10 pm/V) exhibited hJBMSC elongation and reorientation, broad lamellipodia extension, strong intercellular connection and osteogenic differentiation enhancement. Overall, the improved hJBMSC characteristics make the nanostructured tetragonal BaTiO3 coatings promising for application on implant surfaces to promote osseointegration.

Osteoinduction-immunomodulation dual-functional calcium nervonate nanoparticles for promoting bone regeneration

Stem cell-based bone repair in vivo relies on both the osteogenic differentiation of stem cells and the immune activities of immune cells. The lack of effective means to simultaneously tune the local osteoinductive and inflammatory microenvironments is one of the major obstacles to the treatment of bone defects. Herein, we report calcium nervonate nanoparticles as a dual-functional therapeutic platform combining osteoinduction and immunomodulation for bone regeneration. Calcium nervonate nanoparticles will be decomposed into calcium ion (Ca2+) and nervonic acid in acidic lysosomes after being taken up by cells. The released Ca2+ and nervonic acid can then contribute to the osteogenic and anti-inflammatory microenvironments, respectively. In vitro experiments demonstrate that calcium nervonate nanoparticles promote the osteogenic differentiation of mesenchymal stem cells and alleviate the inflammatory response caused by lipopolysaccharide-activated macrophages. In vivo bone defect repair experiments confirm that calcium nervonate nanoparticles have better performance for promoting bone regeneration than Ca2+ or nervonic acid alone. This work develops a new bone regeneration approach by exploring calcium nervonate nanoparticles as a dual-functional platform, which has great promise in repairing bone defects.

Combined computational analysis and cytology show limited depth osteogenic effect on bone defects in negative pressure wound therapy.

Background: The treatment of bone defects remains a clinical challenge. The effect of negative pressure wound therapy (NPWT) on osteogenesis in bone defects has been recognized; however, bone marrow fluid dynamics under negative pressure (NP) remain unknown. In this study, we aimed to examine the marrow fluid mechanics within trabeculae by computational fluid dynamics (CFD), and to verify osteogenic gene expression, osteogenic differentiation to investigate the osteogenic depth under NP. Methods: The human femoral head is scanned using micro-CT to segment the volume of interest (VOI) trabeculae. The VOI trabeculae CFD model simulating the bone marrow cavity is developed by combining the Hypermesh and ANSYS software. The effect of trabecular anisotropy is investigated, and bone regeneration effects are simulated under NP scales of -80, -120, -160, and -200mmHg. The working distance (WD) is proposed to describe the suction depth of the NP. Finally, gene sequence analysis, cytological experiments including bone mesenchymal stem cells (BMSCs) proliferation and osteogenic differentiation are conducted after the BMSCs are cultured under the same NP scale. Results: The pressure, shear stress on trabeculae, and marrow fluid velocity decrease exponentially with an increase in WD. The hydromechanics of fluid at any WD inside the marrow cavity can be theoretically quantified. The NP scale significantly affects the fluid properties, especially those fluid close to the NP source; however, the effect of the NP scale become marginal as WD deepens. Anisotropy of trabecular structure coupled with the anisotropic hydrodynamic behavior of bone marrow; An NP of -120mmHg demonstrates the majority of bone formation-related genes, as well as the most effective proliferation and osteogenic differentiation of BMSCs compared to the other NP scales. Conclusion: An NP of -120mmHg may have the optimal activated ability to promote osteogenesis, but the effective WD may be limited to a certain depth. These findings help improve the understanding of fluid mechanisms behind NPWT in treating bone defects.

Covalently Grafted Biomimetic Matrix Reconstructs the Regenerative Microenvironment of the Porous Gradient Polycaprolactone Scaffold to Accelerate Bone Remodeling.

Integrating a biomimetic extracellular matrix to improve the microenvironment of 3D printing scaffolds is an emerging strategy for bone substitute design. Here, a "soft-hard" bone implant (BM-g-DPCL) consisting of a bioactive matrix chemically integrated on a polydopamine (PDA)-coated porous gradient scaffold by polyphenol groups is constructed. The PDA-coated "hard" scaffolds promoted Ca2+ chelation and mineral deposition; the "soft" bioactive matrix is beneficial to the migration, proliferation, and osteogenic differentiation of stem cells in vitro, accelerated endogenous stem cell recruitment, and initiated rapid angiogenesis in vivo. The results of the rabbit cranial defect model (Φ= 10mm) confirmed that BM-g-DPCL promoted the integration between bone tissue and implant and induced the deposition of bone matrix. Proteomics confirmed that cytokine adhesion, biomineralization, rapid vascularization, and extracellular matrix formation are major factors that accelerate bone defect healing. This strategy of highly chemically bonded soft-hard components guided the construction of the bioactive regenerative scaffold.

Low concentrations of tumor necrosis factor-alpha promote human periodontal ligament stem cells osteogenic differentiation by activation of autophagy via inhibition of AKT/mTOR pathway.

Tumor necrosis factor-alpha (TNF-α) is one of the crucial inflammatory factors in alveolar bone metabolism during the process of periodontitis. Autophagy is indispensable for proper osteoblast function. However, the effects of autophagy on osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs) in inflammatory microenvironment and the underlying mechanisms remain to be clarified. The aim of the present study was to investigate whether autophagy participates in hPDLSCs differentiation after treated with TNF-α and explore the underlying mechanisms. Characterizations of hPDLSCs were evaluated by Alizarin-red S staining, Oil red staining and flow cytometry. hPDLSCs were treated with various concentrations of TNF-α. Rapamycin or 3MA was used to achieve or inhibit autophagy activation. AKT signaling was inhibited using ARQ092. Cell proliferation was evaluated using Cell Counting Kit-8 (CCK8) assay. Real-time reverse transcriptase-polymerase chain reaction assay (RT-PCR), western blot, alkaline phosphatase (ALP) staining and Alizarin Red S staining were applied to evaluate levels of osteogenic differentiation and autophagy. CCK8 showed that low concentrations of TNF-α had no influence on cell proliferation, while high concentrations of TNF-α inhibited proliferation. Low concentrations of TNF-α promoted osteogenic differentiation and autophagy, while high concentrations of TNF-α inhibited osteogenic differentiation and autophagy in hPDLSCs. The levels of osteogenic differentiation in hPDLSCs were partly effected after co-incubation with 0.1 ng/mL TNF-α with 3MA or Rapamycin. ARQ092 enhanced 0.1 ng/mL TNF-α-induced ALP expression and mineral nodule formation. Low concentrations of TNF-α promote hPDLSCs osteogenic differentiation by activation of autophagy via inhibition of AKT/mTOR signaling.

In vitro and in vivo toxicological evaluation of carbon quantum dots originating from Spinacia oleracea

Food-derived carbon quantum dots (CQDs) can relatively easily be synthesized and chemically manipulated for a broad spectrum of biomedical applications. However, their toxicity may hinder their actual use. Here, Spinacia oleracea-derived CQDs i.e., CQD-1 and CQD-2, were synthesized by means of different shredding methods and followed by a microwave-assisted hydrothermal approach. Subsequently, these CQDs were analyzed in vitro and in an in vivo mice model to test their biocompatibility and potential use as bioimaging agents and for activation of osteogenic differentiation.When comparing CQD-1 and CQD-2, it was found that CQD-1 exhibited 7.6 times higher photoluminescent (PL) emission intensity around 411 nm compared to CQD-2. Besides, it was found that the size distribution of CQD-1 was 2.05 ± 0.08 nm, compared with 2.14 ± 0.04 nm for CQD-2. Upon exposure to human bone marrow-derived mesenchymal stem cells (hBMSCs) in vitro, CQD-1 was endocytosed into the cytoplasm and significantly increased the differentiation of hBMSCs up to 10 μg mL−1 after 7 and 14 days. Apparently, the presence of relatively low doses of CQD-1 showed virtually no toxic or histological effects in the major organs in vivo. In contrast, high doses of CQD-1 (1 mg mL-1) caused cell death in vitro ranging from 35% on day 1 to 80% on day 3 post-exposure, and activated the apoptotic machinery and increased lymphocyte aggregates in the liver tissue. In conclusion, S. oleracea-derived CQDs have the potential for biomedical applications in bioimaging and activation of stem cells osteogenic differentiation. Therefore, it is postulated that CQD-1 from S. oleracea remains potential prospective material at appropriate doses and specifications.

Shape-memory responses compared between random and aligned electrospun fibrous mats.

Significant progress has been made in the design of smart fibers toward achieving improved efficacy in tissue regeneration. While electrospun fibers can be engineered with shape memory capability, both the fiber structure and applied shape-programming parameters are the determinants of final performance in applications. Herein, we report a comparison study on the shape memory responses compared between electrospun random and aligned fibers by varying the programming temperature T prog and the deforming strain ε deform . A PLLA-PHBV (6:4 mass ratio) polymer blend was first electrospun into random and aligned fibrous mat forms; thereafter, the effects of applying specific T prog (37°C and 46°C) and ε deform (30%, 50%, and 100%) on the morphological change, shape recovery efficiency, and switching temperature T sw of the two types of fibrous structures were examined under stress-free condition, while the maximum recovery stress σ max was determined under constrained recovery condition. It was identified that the applied T prog had less impact on fiber morphology, but increasing ε deform gave rise to attenuation in fiber diameters and bettering in fiber orientation, especially for random fibers. The efficiency of shape recovery was found to correlate with both the applied T prog and ε deform , with the aligned fibers exhibiting relatively higher recovery ability than the random counterpart. Moreover, T sw was found to be close to T prog , thereby revealing a temperature memory effect in the PLLA-PHBV fibers, with the aligned fibers showing more proximity, while the σ max generated was ε deform -dependent and 2.1-3.4 folds stronger for the aligned one in comparison with the random counterpart. Overall, the aligned fibers generally demonstrated better shape memory properties, which can be attributed to the macroscopic structural orderliness and increased molecular orientation and crystallinity imparted during the shape-programming process. Finally, the feasibility of using the shape memory effect to enable a mechanoactive fibrous substrate for regulating osteogenic differentiation of stem cells was demonstrated with the use of aligned fibers.

Adjusting physicochemical and cytological properties of biphasic calcium phosphate by magnesium substitution: An in vitro study

Biphasic calcium phosphate (BCP) is a highly study bone defect repair material with adjustable degradation, perfect osteoconduction and good osteoinduction. As one of the essential trace elements, magnesium (Mg) possesses the abilities of pro-osteogenesis and pro-angiogenesis. Therefore, Mg doping may further expand the application of BCP in bone defect repair, but few studies focus on promoting the osteogenesis and angiogenesis of BCP simultaneously by Mg doping, and the optimal doping amount of Mg remains to be explored. In this study, the physicochemical and biological properties of BCP scaffold affected by Mg doping were systematically study. Results showed that Mg doping enhanced the sintering of BCP scaffold, resulting in the decrease of degradation rate at the initial soaking period. However, the introduction of Mg damaged the lattice stability of BCP, leading to the increase of BCP degradation rate at the later soaking period. BCP scaffolds with Mg doping content ≥3 mol.% could achieve a long-term sustained release of Mg. The ion microenvironment created by Mg-doped scaffolds was simultaneously conducive to the osteogenic differentiation of stem cells and the enhanced angiogenic activity of endothelial cells. The scaffold doped with 5 mol.% of Mg (Mg5–S) showed the highest efficiency in promoting osteogenic differentiation. Mg-doped BCP scaffolds with a doping content ≥3 mol.%, especially Mg5–S, significantly improved the proliferation and angiogenic differentiation of endothelial cells. Based on these, we believe that the optimal doping content of Mg in BCP is 5 mol.%, and Mg5–S has great application potential in bone defect repair.

ROS-scavenging hydrogel as protective carrier to regulate stem cells activity and promote osteointegration of 3D printed porous titanium prosthesis in osteoporosis.

Stem cell-based therapy has drawn attention as an alternative option for promoting prosthetic osteointegration in osteoporosis by virtue of its unique characteristics. However, estrogen deficiency is the main mechanism of postmenopausal osteoporosis. Estrogen, as an effective antioxidant, deficienncy also results in the accumulation of reactive oxygen species (ROS) in the body, affecting the osteogenic differentiation of stem cells and the bone formation i osteoporosis. In this study, we prepared a ROS-scavenging hydrogel by crosslinking of epigallocatechin-3-gallate (EGCG), 3-acrylamido phenylboronic acid (APBA) and acrylamide. The engineered hydrogel can scavenge ROS efficiently, enabling it to be a cell carrier of bone marrow-derived mesenchymal stem cells (BMSCs) to protect delivered cells from ROS-mediated death and osteogenesis inhibition, favorably enhancing the tissue repair potential of stem cells. Further in vivo investigations seriously demonstrated that this ROS-scavenging hydrogel encapsulated with BMSCs can prominently promote osteointegration of 3D printed microporous titanium alloy prosthesis in osteoporosis, including scavenging accumulated ROS, inducing macrophages to polarize toward M2 phenotype, suppressing inflammatory cytokines expression, and improving osteogenesis related markers (e.g., ALP, Runx-2, COL-1, BSP, OCN, and OPN). This work provides a novel strategy for conquering the challenge of transplanted stem cells cannot fully function in the impaired microenvironment, and enhancing prosthetic osteointegration in osteoporosis.

Lactoferrin Mediates Enhanced Osteogenesis of Adipose-Derived Stem Cells: Innovative Molecular and Cellular Therapy for Bone Repair.

A prospective source of stem cells for bone tissue engineering is adipose-derived stem cells (ADSCs), and BMP-2 has been proven to be highly effective in promoting the osteogenic differentiation of stem cells. Rarely has research been conducted on the impact of lactoferrin (LF) on ADSCs' osteogenic differentiation. As such, in this study, we examined the effects of LF and BMP-2 to assess the ability of LF to stimulate ADSCs' osteogenic differentiation. The osteogenic medium was supplemented with the LF at the following concentrations to culture ADSCs: 0, 10, 20, 50, 100, and 500 μg/mL. The Cell Counting Kit-8 (CCK-8) assay was used to measure the proliferation of ADSCs. Calcium deposition, alkaline phosphatase (ALP) staining, real-time polymerase chain reaction (RT-PCR), and an ALP activity assay were used to establish osteogenic differentiation. RNA sequencing analysis was carried out to investigate the mechanism of LF boosting the osteogenic development of ADSCs. In the concentration range of 0-100 μg/mL, LF concentration-dependently increased the proliferative vitality and osteogenic differentiation of ADSCs. At a dose of 500 μg/mL, LF sped up and enhanced differentiation, but inhibited ADSCs from proliferating. LF (100 and 500 μg/mL) produced more substantial osteoinductive effects than BMP-2. The PI3 kinase/AKT (PI3K/AKT) and IGF-R1 signaling pathways were significantly activated in LF-treated ADSCs. The in vitro study results showed that LF could effectively promote osteogenic differentiation of ADSCs by activating the PI3K/AKT and IGF-R1 pathways. In our in vitro investigation, an LF concentration of 100 μg/mL was optimal for osteoinduction and proliferation. Our study suggests that LF is an attractive alternative to BMP-2 in bone tissue engineering. As a bioactive molecule capable of inducing adipose stem cells to form osteoblasts, LF is expected to be clinically used in combination with biomaterials as an innovative molecular and cellular therapy to promote bone repair.

Injectable platelet-rich fibrin positively regulates osteogenic differentiation of stem cells from implant hole via the ERK1/2 pathway

Bone regeneration in dentistry is a dynamic approach for treating critical size bone defects that are unlikely to self-heal. Human bone marrow stem cell (hBMSCs) therapies are being tested clinically for various disorders and have remarkable clinical advancements in bone regeneration. Injectable platelet-rich fibrin (i-PRF), which is obtained from autologous blood centrifuged at 700 rpm (60 G) for 3 min can promote osteogenic differentiation of this cell, but the mechanism remains unclear. The objectives of this study were to explore the contents of i-PRF further and investigate its effect on the cell behavior of hBMSCs and the underlying molecular mechanisms. The results showed that i-PRF contained 41 cytokines, including macrophage colony-stimulating factor (M-CSF) and β-nerve growth factor (β-NGF), which had not been reported before. The Cell Counting Kit-8 and wound healing assay showed that 10% and 20% i-PRF improved the proliferation rate and the migration capacity of hBMSCs without toxicity to cells. Besides, the expression of osteogenic markers and the capacity to form mineralized nodules of hBMSCs were promoted by 20% i-PRF. Furthermore, i-PRF activated the ERK pathway, and the ERK inhibitor attenuated its effects. In summary, i-PRF promotes hBMSCs proliferation and migration and facilitates cell osteogenesis through the ERK pathway, which has promising potential in bone regeneration.

Polyphenolic-modified cellulose acetate membrane for bone regeneration through immunomodulation

To enhance the bioactivity of cellulosic derivatives has become an important strategy to promote their value for clinical applications. Herein, protocatechualdehyde (PCA), a polyphenolic molecule, was used to modify a cellulose acetate (CA) membrane by combining with metal ions to confer an immunomodulatory activity. The PCA-modified CA membrane has shown a significant radical scavenging activity, thereby suppressed the inflammatory response and created a favorable immune microenvironment for osteogenesis and mineralization. Moreover, addition of metal ions could further stimulate the osteogenic differentiation of stem cells and accelerate bone regeneration both in vitro and in vivo. This study may provide a strategy to promote the immunomodulatory activity of cellulose-based biomaterials for bone regeneration.

Fluidic Force Microscopy and Atomic Force Microscopy Unveil New Insights into the Interactions of Preosteoblasts with 3D‐Printed Submicron Patterns (Small 2/2023)

Interactions of Preosteoblasts Physical patterns are potential surface cues for promoting osteogenic differentiation of stem cells and improving osseointegration of orthopedic implants. Fluidic force microscopy and atomic force microscopy are used to quantitatively investigate the early interaction of preosteoblasts with 3D-printed patterns having different pillar heights and osteogenic properties. The study explains the differential cell adhesion behaviour induced by different pillar heights, enabling advancements in the rational design of osteogenic patterns. More details can be found in article number 2204662 by Livia Angeloni, Murali K. Ghatkesar, Lidy E. Fratila-Apachitei, and co-workers.

Hsa_circ_0007334 Promotes the Osteogenic Differentiation and Proliferation of Human Bone Marrow Mesenchymal Stem Cells by Sponging miR-144-3p

This study aimed to identify the possible function and the molecular mechanism of hsa_circ_0007334 in human bone marrow mesenchymal stem cells (hBMSCs) osteogenic differentiation. The level of hsa_circ_0007334 was detected by means of quantitative real-time polymerase chain reaction (RT-qPCR). Alkaline phosphatase (ALP), RUNX2, osterix (OSX), and osteocalcin (OCN) were monitored to analyze the degree of osteogenic differentiation under routine culture or under the control of hsa_circ_0007334. The proliferation of hBMSCs was tested with a cell counting kit-8 (CCK-8) assay. The migration of hBMSCs was tested using the Transwell assay. Bioinformatics analysis was used to predict the possible targets of hsa_circ_0007334 or miR-144-3p. Dual-luciferase reporter assay system was used to analyze the combination between hsa_circ_0007334 and miR-144-3p. Hsa_circ_0007334 was upregulated in osteogenic differentiation of hBMSCs. Osteogenic differentiation increased by hsa_circ_0007334 in vitro was confirmed with levels of ALP and bone markers (RUNX2, OCN, OSX). hsa_circ_0007334 overexpression promoted osteogenic differentiation, proliferation, and migration of hBMSCs, and knockdown of hsa_circ_0007334 has the opposite effects. miR-144-3p was identified as the target of hsa_circ_0007334. The targeting genes of miR-144-3p are involved in osteogenic-differentia-tion-related biological processes (such as bone development, epithelial cell proliferation, and mesenchymal cell apoptotic prosess) and pathways (including FoxO and VEGF signaling pathway). Hsa_circ_0007334, therefore, presents itself as a promising biological for osteogenic differentiation.

Laponite–Gelatin Nanofibrous Microsphere Promoting Human Dental Follicle Stem Cells Attachment and Osteogenic Differentiation for Noninvasive Stem Cell Transplantation

Back Cover: Nanofibrous architecture of 3-dimensional scaffold can be an exceptional candidate for cell delivery. In article number 2200347, Jyotsnendu Giri and co-workers fabricated the laponite loaded osteoinductive nanofibrous microspheres to mimic the native stem cell niche. Osteoinductive nanofibrous microspheres, facilitate the excellent stem cell attachment, proliferation, and osteogenic differentiation for noninvasive stem cell transplantation.

Integrating physicomechanical and biological strategies for BTE: biomaterials-induced osteogenic differentiation of MSCs.

Large bone defects are a major global health concern. Bone tissue engineering (BTE) is the most promising alternative to avoid the drawbacks of autograft and allograft bone. Nevertheless, how to precisely control stem cell osteogenic differentiation has been a long-standing puzzle. Compared with biochemical cues, physicomechanical stimuli have been widely studied for their biosafety and stability. The mechanical properties of various biomaterials (polymers, bioceramics, metal and alloys) become the main source of physicomechanical stimuli. By altering the stiffness, viscoelasticity, and topography of materials, mechanical stimuli with different strengths transmit into precise signals that mediate osteogenic differentiation. In addition, externally mechanical forces also play a critical role in promoting osteogenesis, such as compression stress, tensile stress, fluid shear stress and vibration, etc. When exposed to mechanical forces, mesenchymal stem cells (MSCs) differentiate into osteogenic lineages by sensing mechanical stimuli through mechanical sensors, including integrin and focal adhesions (FAs), cytoskeleton, primary cilium, ions channels, gap junction, and activating osteogenic-related mechanotransduction pathways, such as yes associated proteins (YAP)/TAZ, MAPK, Rho-GTPases, Wnt/β-catenin, TGFβ superfamily, Notch signaling. This review summarizes various biomaterials that transmit mechanical signals, physicomechanical stimuli that directly regulate MSCs differentiation, and the mechanical transduction mechanisms of MSCs. This review provides a deep and broad understanding of mechanical transduction mechanisms and discusses the challenges that remained in clinical translocation as well as the outlook for the future improvements.

Layer-by-layer assembly of procyanidin and collagen promotes mesenchymal stem cell proliferation and osteogenic differentiation in vitro and in vivo.

Collagen, commonly used in tissue engineering, is widespread in various tissues. During bone tissue regeneration, collagen can stimulate the cellular response and determine the fate of cells. In this work, we integrated collagen type II with procyanidin (PC) onto an implant coating by applying a layer-by-layer technique to demonstrate that collagen and PC can participate in the construction of new biomaterials and serve as multifunctional components. The effects of PC/collagen multilayers on the viability of cocultured bone marrow mesenchymal stem cells (BMSCs) were analyzed by cell counting kit-8 analysis and phalloidin staining. The reactive oxygen species level of BMSCs was revealed through immunofluorescent staining and flow cytometry. Osteogenesis-related genes were detected, and in vivo experiment was performed to reveal the effect of newly designed material on the osteogenic differentiation of BMSCs. Our data demonstrated that in BMSCs PC/collagen multilayers accelerated the proliferation and osteogenic differentiation through Wnt/β-catenin signaling pathway and enhanced bone generation around the implant in the bone defect model of rabbit femurs. In summary, combination of collagen and PC provided a new sight for the research and development of implant materials or coatings in the future.

PI3K-Akt signaling regulates BMP2-induced osteogenic differentiation of mesenchymal stem cells (MSCs): A transcriptomic landscape analysis

Bone morphogenetic protein 2 (BMP2) effectively induced mesenchymal stem cells (MSCs) osteogenic differentiation hold great potential for bone tissue engineering. However, a global mechanistic view of BMP2-induced osteogenic differentiation of MSCs remains to be fully elucidated. Here, human umbilical cord-derived MSCs (UC-MSCs) were induced with BMP2, three days and five days later, total RNA were extracted and subjected to RNA-sequencing (RNA-Seq) followed with bioinformatic analysis. Osteogenic differentiation abilities were evaluated with Alkaline phosphatase (ALP) staining and osteogenic differentiation marker expression at both mRNA and protein levels. We identified that adenoviral vectors effectively transduced in UC-MSCs and expressed BMP2 in high efficiency. Both on day 3 and day 5, differentially expressed genes (DEGs) were highly enriched in PI3K-Akt signaling pathway. As for the common DEGs among total BMP2 group vs control group, BMP2 (day 3) versus control (day 3) and BMP2 (day 5) versus control (day 5), there were 105 DGEs and highly enriched in PI3K-Akt signaling pathway. Finally, we found that PI3K-Akt signaling inhibitor dramatically inhibited BMP2-iduced osteogenic differentiation of UC-MSCs. We firstly identified that PI3K-Akt signaling pathway plays a pivotal role in BMP2-induced osteogenic differentiation of MSCs, which may apply a new perspective for BMP2 based bone tissue engineering.