Osteogenic Differentiation Of Dental Pulp Stem Cells Research Articles

Inhibition of ZDHHC16 promoted osteogenic differentiation and reduced ferroptosis of dental pulp stem cells by CREB

BackgroundThe repair of bone defects caused by periodontal diseases is a difficult challenge in clinical treatment. Dental pulp stem cells (DPSCs) are widely studied for alveolar bone repair. The current investigation aimed to examine the specific mechanisms underlying the role of Zinc finger DHHC-type palmitoyl transferases 16 (ZDHHC16) in the process of osteogenic differentiation (OD) of DPSCs.MethodsThe lentiviral vectors ZDHHC16 or si-ZDHHC16 were introduced in the DPSCs and then the cells were induced by an odontogenic medium for 21 days. Subsequently, Quantitate Polymerase Chain Reaction (PCR), immunofluorescent staining, proliferation assay, ethynyl deoxyuridine (EdU) staining, and western blot analysis were used to investigate the specific details of ZDHHC16 contribution in OD of DPSCs.ResultsOur findings indicate that ZDHHC16 exhibited a suppressive effect on cellular proliferation and oxidative phosphorylation, while concurrently inducing ferroptosis in DPSCs. Moreover, the inhibition of ZDHHC16 promoted cell development and OD and reduced ferroptosis of DPSCs. The expression of p-CREB was suppressed by ZDHHC16, and immunoprecipitation (IP) analysis revealed that ZDHHC16 protein exhibited interconnection with cAMP-response element binding protein (CREB) of DPSCs. The CREB suppression reduced the impacts of ZDHHC16 on OD and ferroptosis of DPSCs. The activation of CREB also reduced the influences of si-ZDHHC16 on OD and ferroptosis of DPSCs.ConclusionsThese findings provide evidences to support a negative association between ZDHHC16 and OD of DPSCs, which might be mediated by ferroptosis of DPSCs via CREB.

Inhibition of lipopolysaccharide-induced NF-κB maintains osteogenesis of dental pulp and periodontal ligament stem cells.

Dental pulp stem cells (DPSCs) and periodontal ligament stem cells (PDLSCs) can differentiate into osteoblasts, indicating that both are potential candidates for bone tissue engineering. Osteogenesis is influenced by many environmental factors, one of which is lipopolysaccharide (LPS). LPS-induced NF-κB activity affects the osteogenic potencies of different types of MSCs differently. This study evaluated the effect of LPS-induced NF-κB activity and its inhibition in DPSCs and PDLSCs. DPSCs and PDLSCs were cultured in an osteogenic medium, pretreated with/without NF-κB inhibitor Bay 11-7082, and treated with/without LPS. Alizarin red staining was performed to assess bone nodule formation, which was observed under an inverted light microscope. NF-κB and alkaline phosphatase (ALP) activities were measured to examine the effect of Bay 11-7082 pretreatment and LPS supplementation on osteogenic differentiation of DPSCs and PDLSCs. LPS significantly induced NF-κB activity (p = 0.000) and reduced ALP activity (p = 0.000), which inhibited bone nodule formation in DPSCs and PDLSCs. Bay 11-7082 inhibited LPS-induced NF-κB activity, and partially maintained ALP activity and osteogenic potency of LPS-supplemented DPSCs and PDLSCs. Thus, inhibition of LPS-induced NF-κB activity can maintain the osteogenic potency of DPSCs and PDLSCs.

Bioprinting EphrinB2-Modified Dental Pulp Stem Cells with Enhanced Osteogenic Capacity for Alveolar Bone Engineering.

Bioprinting, a technology that allows depositing living cells and biomaterials together into a complex tissue architecture with desired pattern, becomes a revolutionary technology for fabrication of engineered constructs. Previously, we have demonstrated that EphrinB2-modified dental pulp stem cells (DPSCs) are expected to be promising seed cells with enhanced osteogenic differentiation capability for alveolar bone regeneration. In this study, we aimed to bioprint EphrinB2-overexpressing DPSCs with low-concentrated Gelatin methacrylate (GelMA) hydrogels into three-dimensional (3D) constructs. The printability of GelMA (5% w/v) and the structural fidelity of bioprinted constructs were examined. Then, viability, proliferation, morphology, and osteogenic differentiation of DPSCs in bioprinted constructs were measured. Finally, the effect of EphrinB2 overexpression on osteogenic differentiation of DPSCs in bioprinted constructs was evaluated. Our results demonstrated that GelMA (5% w/v) in a physical gel form was successfully bioprinted into constructs with various shapes and patterns using optimized printing parameters. Embedded DPSCs showed round-like morphology, and had a high viability (91.93% ± 8.38%) and obvious proliferation (∼1.9-fold increase) 1 day after printing. They also showed excellent osteogenic potential in bioprinted constructs. In bioprinted 3D constructs, EphrinB2-overexpressing DPSCs expressed upregulated osteogenic markers, including ALP, BMP2, RUNX2, and SP7, and generated more mineralized nodules, as compared with Vector-DPSCs. Taken together, this study indicated that fabrication of bioprinted EphrinB2-DPSCs-laden constructs with enhanced osteogenic potential was possible, and 3D bioprinting strategy combined with EphrinB2 gene modification was a promising way to create bioengineered constructs for alveolar bone regeneration.

Sphingosine-1-phosphate hinders the osteogenic differentiation of dental pulp stem cells in association with AKT signaling pathways

Sphingosine-1-phosphate (S1P) is an important lipid mediator that regulates a diverse range of intracellular cell signaling pathways that are relevant to tissue engineering and regenerative medicine. However, the precise function of S1P in dental pulp stem cells (DPSCs) and its osteogenic differentiation remains unclear. We here investigated the function of S1P/S1P receptor (S1PR)-mediated cellular signaling in the osteogenic differentiation of DPSCs and clarified the fundamental signaling pathway. Our results showed that S1P-treated DPSCs exhibited a low rate of differentiation toward the osteogenic phenotype in association with a marked reduction in osteogenesis-related gene expression and AKT activation. Of note, both S1PR1/S1PR3 and S1PR2 agonists significantly downregulated the expression of osteogenic genes and suppressed AKT activation, resulting in an attenuated osteogenic capacity of DPSCs. Most importantly, an AKT activator completely abrogated the S1P-mediated downregulation of osteoblastic markers and partially prevented S1P-mediated attenuation effects during osteogenesis. Intriguingly, the pro-inflammatory TNF-α cytokine promoted the infiltration of macrophages toward DPSCs and induced S1P production in both DPSCs and macrophages. Our findings indicate that the elevation of S1P under inflammatory conditions suppresses the osteogenic capacity of the DPSCs responsible for regenerative endodontics.

Effects of BMAL1 on dentinogenic differentiation of dental pulp stem cells via PI3K/Akt/mTOR pathway.

This study aimed to investigate the effect of the circadian clock gene Bmal1 on dentinogenic differentiation of dental pulp stem cells (DPSCs) under inflammatory conditions. Dental pulp stem cells were isolated from the pulp tissue of the healthy donor and were then stimulated with different concentrations of lipopolysaccharide (LPS) to mimic inflammatory conditions. Real-time polymerase chain reaction was used to detect the gene expression of circadian clock genes Bmal1, Clock, Per1, Per2, Cry1, and Cry2. Western blot (WB) was applied to analyse the protein expression of circadian clock proteins (BMAL1, CLOCK) and dentinogenic differentiation-related proteins (DSPP, DMP1). In addition, the apoptosis and osteogenic differentiation of DPSCs were also analysed in the presence of different concentrations of LPS. The expression of circadian clock genes of DPSCs significantly changed in an inflammatory environment. WB analysis shows that BMAL1 is relevant to the dentinogenic differentiation of DPSCs. In low concentrations of LPS-mimicked inflammatory conditions, the expression of BMAL1 increased and promoted the dentinogenic differentiation of DPSCs. However, under high concentrations of LPS-mimicked inflammatory conditions, the expression of BMAL1 decreased and inhibited the dentinogenic differentiation of DPSCs. Moreover, the effects of BMAL1 on dentinogenic differentiation of DPSCs may be through PI3K/Akt/mTOR pathway. This study showed that the circadian clock gene Bmal1 affected dentinogenic differentiation of DPSCs, providing a new insight for clinical stem cell-based restorative dentinogenesis therapies.

Attachment and Osteogenic Potential of Dental Pulp Stem Cells on Non-Thermal Plasma and UV Light Treated Titanium, Zirconia and Modified PEEK Surfaces.

Ultraviolet (UV) light and non-thermal plasma (NTP) treatment are chairside methods that can efficiently improve the biological aging of implant material surfaces caused by customary storage. However, the behaviors of stem cells on these treated surfaces of the implant are still unclear. This study aimed to investigate the effects of UV light and NTP treated surfaces of titanium, zirconia and modified polyetheretherketone (PEEK, BioHPP) on the attachment and osteogenic potential of human dental pulp stem cells (DPSCs) in vitro. Machined disks were treated using UV light and argon or oxygen NTP for 12 min each. Untreated disks were set as controls. DPSCs were cultured from the wisdom teeth of adults that gave informed consent. After 24 h of incubation, the attachment and viability of cells on surfaces were assessed. Cells were further osteogenically induced, alkaline phosphatase (ALP) activity was detected via a p-Nitrophenyl phosphate assay (day 14 and 21) and mineralization degree was measured using a Calcium Assay kit (day 21). UV light and NTP treated titanium, zirconia and BioHPP surfaces improved the early attachment and viability of DPSCs. ALP activity and mineralization degree of osteoinductive DPSCs were significantly increased on UV light and NTP treated surfaces of titanium, zirconia and also oxygen plasma treated Bio-HPP (p < 0.05). In conclusion, UV light and NTP treatments may improve the attachment of DPSCs on titanium, zirconia and BioHPP surfaces. Osteogenic differentiation of DPSCs can be enhanced on UV light and NTP treated surfaces of titanium and zirconia, as well as on oxygen plasma treated Bio-HPP.

Influence of Curcumin Nanocrystals on the Early Osteogenic Differentiation and Proliferation of Dental Pulp Stem Cells

Regenerative therapies are the developed method for regrowing, repairing, or exchanging damaged or diseased cells, tissues, or organs. Bone injury regeneration is a complicated procedure. For this reason, stimulation of the osteogenic differentiation impact on mesenchymal stem cells (MSCs) is a critical method. The goal of the current study was to test the biocompatibility and induction of early osteogenic differentiation by curcumin nanocrystals in human dental pulp stem cells (DPSCs) which are MSCs derived from dental pulp. In this study, curcumin nanocrystals were produced through the spray-drying technique and then were characterized using conventional methods. Then, cytotoxicity and proliferative properties of curcumin nanocrystals were evaluated in different concentrations at 48 hours, 72 hours, and 7 days which were measured by the MTT test, and a special kit was used to determine the activity of alkaline phosphatase (ALP). The results of this study displayed that the prepared nanocurcumin with the mean particle size of 128 nm, spherical morphology, and the negative surface charge did not show a toxic effect on dental pulp cells in most concentrations for 48 and 72 hours and was toxic only at a concentration of 25 μM. Also, comparing the toxicity of different doses at 7 days showed that at concentrations of 2.5, 5, 10, and 25 μM, cell growth was significantly inhibited. ALP activity was increased in two weeks compared to one week and also compared to that of the control group significantly ( p &lt; 0.05 ). Considering the positive possessions of nanocurcumin on the osteogenic differentiation of DPSCs and its low toxicity, this substance can be considered in the planning of regenerative protocols.

Overexpression of long noncoding RNA MCM3AP-AS1 promotes osteogenic differentiation of dental pulp stem cells via miR-143-3p/IGFBP5 axis.

MCM3AP-AS1 regulates the cartilage repair in osteoarthritis, but how it regulates osteogenic differentiation of dental pulp stem cells (DPSCs) remains to be determined. DPSCs were isolated and induced for osteogenic differentiation. MCM3AP-AS1 expression was increased along with the osteogenic differentiation of DPSCs, whose expression was positive correlated with those of OCN, alkaline phosphatase (ALP) and RUNX2. On contrary, miR-143-3p expression was decreased along with the osteogenic differentiation and was negatively correlated with those of OCN, ALP and RUNX2. Dual-luciferase reporter gene assay showed that miR-143-3p can be negatively regulated by MCM3AP-AS1 and can regulate IGFBP5. MCM3AP-AS1 overexpression increased the expression levels of osteogenesis-specific genes, ALP activity and mineralized nodules during DPSC osteogenic differentiation, while IGFBP5 knockdown or miR-143-3p overexpression counteracted the effect of MCM3AP-AS1 overexpression in DPSCs. Therefore, this study demonstrated the role of MCM3AP-AS1/miR-143-3p/IGFBP5 axis in regulating DPSC osteogenic differentiation.

Study of optimal conditions for growth and osteogenic differentiation of dental pulp stem cells based on glucose and serum content.

Dental pulp stem cells (DPSCs) have shown promising characteristics in terms of their proliferation and osteogenic differentiation potential, which could be of greater benefit in regenerative dentistry. However, obstacles remain in the in vitro cultivation of DPSCs, which significantly affect their growth and differentiating ability. Therefore in this study, we demonstrated the growth and osteogenic differentiation of DPSCs in the presence of media containing different combinations of serum and glucose to get an optimized combination of both. DPSCs were cultured in media containing combinations of low glucose (LG), low serum (LS), high glucose (HG), and high serum (HS). The proliferation and osteogenic differentiation were assessed in DPSCs cultured with these different combinations of culture conditions. High glucose high serum condition significantly inhibited the proliferation of DPSCs and also affected their clonogenic potential, as evidenced by colony-forming units. Irrespective of the serum content, high glucose in the media also decreased the osteogenic potential of DPSCs confirmed by functional staining, and downregulation of osteogenesis-related genes. High glucose content in the culture media affects the growth and differentiation potential of the DPSCs. Hence, the culture conditions for the DPSCs should be reconsidered to utilize their maximum potential.

CircRFWD2 Promotes Osteogenic Differentiation of human Dental Pulp Stem Cells by Targeting miR-6817-5p Through BMP-Smad and p38 MAPK Pathway

Dental pulp stem cells (DPSCs) are one promising cell source of mesenchymal stem cells in bone tissue engineering. However, it remains unknown that the molecules and signaling pathways involved in osteogenesis of DPSCs. Hence, this study investigated the functional roles and underlying mechanisms of circRFWD2 during osteogenesis of DPSCs. Knockdown of circRFWD2 suppressed osteogenesis of DPSCs significantly. Mechanistically, circRFWD2 could crosstalk with miR-6817-5p, which was an inhibitor of DPSCs osteogenesis. MiR-6817-5p functioned as a sponge of BMPR2, which regulated the phosphorylation of Smad5 and p38 to impact osteogenesis activity of DPSCs. Collectively, circRFWD2/miR-6817-5p/BMPR2 axis could regulate DPSCs osteogenesis via BMP-Smad and p38 MAPK pathway, which are novel mechanisms in the osteogenic differentiation of DPSCs and suggest potential therapeutic methods for bone defects regeneration.

LncRNA LEF1-AS1 promotes osteogenic differentiation of dental pulp stem cells via sponging miR-24-3p.

The role of lncRNA LEF1-AS1 in the regulation of osteogenic differentiation of dental pulp stem cells (DPSCs) is still obscure. Here, we demonstrated that LncRNA LEF1-AS1 expression was associated with osteogenic differentiation of DPSCs and overexpression of LEF1-AS1 promoted osteogenic differentiation. Moreover, lncRNA LEF1-AS1 and miR-24-3p could directly regulate each other and LEF1-AS1 acted as sponge partner of miR-24-3p. Furthermore, LEF1-AS1 and miR-24-3p synergized to regulate osteogenic differentiation of DPSCs. Finally, we verified TGFBR1 was the direct target of miR-24-3p in osteogenic differentiation of DPSCs and miR-24-3p/LEF1-AS1 sponged to regulate TGFBR1 expression. Our study revealed a novel mechanism about how did lncRNA LEF1-AS1 execute function in osteogenesis of DPSCs and thus might serve as potential therapeutic target for the bone regeneration in the dental pulp.

Concanavalin A Enhanced Proliferation and Osteogenic Differentiation of Dental Pulp Stem Cells.

Objective Dental pulp stem cells (DPSCs) can be used as a component in the formation of regenerative dentine during direct pulp capping therapy. Concanavalin A (ConA) is a type of lectin with a molecular weight of 26 kDa derived from the Canavalia ensiformis plant. Lectins possess strong proliferation and differentiation abilities in various animal cells including lymphocytes, osteoblasts, and chondrocytes. The aim of study was to determine the effect of ConA on the proliferation and osteogenic differentiation of DPSCs in vitro . Materials and Methods In this in vitro study, DPSCs were isolated from third molars before ConA induction was performed at concentrations of 5 and 10 μg/mL. The proliferation assay was determined by 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. Osteogenic differentiation was determined by means of mineralization. Statistical Analysis Data were analyzed using analysis of variance and a Student’s t -test. The p -value was set at 0.05. Results The addition of 5 and 10 µg/mL of ConA to DPSCs can significantly increase the proliferation and osteogenic differentiation of DPSCs ( p ≤0.05). Conclusion ConA can increase the proliferation and osteogenic differentiation of DPSCs.

EphrinB2 overexpression enhances osteogenic differentiation of dental pulp stem cells partially through ephrinB2-mediated reverse signaling

BackgroundAlveolar bone loss is a frequent occurrence. Dental pulp stem cells (DPSCs) which have invasive accessibility and high osteogenic potential is a promising source for cell-based bone regeneration. EphrinB2 is involved in bone homeostasis and osteogenesis. The aim of this study was to investigate the effect and mechanism of ephrinB2 overexpression on osteogenic differentiation of DPSCs and bone defect repair.MethodsEphrinB2 expression was analyzed during osteogenic induction of human DPSCs (hDPSCs). Endogenous ephrinB2 expression in hDPSCs was then upregulated using EfnB2 lentiviral vectors. The effect of ephrinB2 overexpression on osteogenic differentiation capacity of hDPSCs was investigated in vitro, and activation of ephrinB2-EphB4 bidirectional signaling in ephrinB2-overexpressing hDPSCs was detected. In vivo, a canine alveolar bone defect model was established and canine DPSCs (cDPSCs) were cultured, characterized, EfnB2-tranfected, and combined with a PuraMatrix scaffold. Micro-CT analysis was performed to evaluate the therapeutic effect of ephrinB2-overexpressing cDPSCs on bone defect repair.ResultsEphrinB2 was upregulated after osteogenic induction of hDPSCs. EphrinB2 overexpression enhanced osteogenic differentiation capacity of hDPSCs in vitro. Moreover, p-ephrinB2 instead of p-EphB4 was upregulated by ephrinB2 overexpression, and activation of ephrinB2-mediated reverse signaling promoted osteogenic differentiation of hDPSCs. In a canine bone defect model, ephrinB2 overexpression in cDPSCs significantly improved trabecular bone volume per tissue volume (BV/TV) and trabecular thickness, as demonstrated by radiographic analysis.ConclusionsEphrinB2 overexpression enhanced osteogenic potential of DPSCs partially via upregulation of ephrinB2-mediated reverse signaling and effectively promoted alveolar bone defect repair.

Hydroxyapatite-collagen augments osteogenic differentiation of dental pulp stem cells.

The objectives of this study were to isolate and culture dental pulp stem cells (DPSCs) and to investigate their proliferation and osteogenic differentiation on hydroxyapatite-collagen (HA-Col) scaffold. DPSCs were characterized by fluorescence-activated cell sorting (FACS). Cultured cells were CD73+, CD90+, CD105+ and CD31-, CD45-. A commercially available HA-Col scaffold was used for culture of DPSCs. Cell attachment and viability of DPSCs cultured on scaffold was studied by sulforhodamine assay. Osteoblast differentiation capacity was studied by alkaline phosphatase assay and the effects of growth factors such as PDGF, IGF1 and FGF2 were further studied. Scanning electron microscopy (SEM) of cell seeded scaffolds was also performed. We found that DPSCs cultured exhibited the characteristic mesenchymal stem cells (MSCs) morphology and differentiation properties. Scaffold was found to be non-cytotoxic and had good biocompatibility in vitro. Osteoblast differentiation ability was found to increase at higher concentration of scaffold and additive effects were observed with the use of growth factors. In SEM, cells appeared to cover the entire surface of the scaffold forming continuous cell layer and extending filopodial extensions. HA-Col scaffold is apt for MSCs attachment and proliferation in vitro. Their unique self-renewal and multilineage differential potential make them ideal for use in regenerative medicine. The limitations of currently available bone graft materials have led to the emergence of tissue engineering using mesenchymal stem cells (MSCs). Since, HA-Col scaffold potentiated the proliferation and osteogenic differentiation of DPSCs, this biomimetic material may be an ideal one for maxillofacial and alveolar bone regeneration.

Expression of microRNAs targeting heat shock protein B8 during in vitro expansion of dental pulp stem cells in regulating osteogenic differentiation

ObjectiveThe objectives of this study were (a) to determine the differentially expressed microRNAs that can target heat shock protein B8 (HspB8) during in vitro expansion of dental pulp stem cells (DPSCs); (b) to identify microRNAs involved in posttranscriptional regulation of HspB8 expression; and (c) to determine if HspB8-targeting microRNAs play roles on osteogenic differentiation of DPSCs. DesignDPSCs were established from rat first molars and expanded in vitro until the passage that cells lost osteogenic potential. TargetScan was used to predict the microRNAs that target HspB8 mRNA. Stem-loop quantitative RT-PCR was conducted to identify the HspB8-targeting microRNAs that were upregulated in late passages. The microRNAs mimics were transfected into DPSCs to assess their effects on HspB8 expression and on osteogenic differentiation. Resultslet-7b-5p, miR-98-5p, miR-215, miR-219a-1-3p and miR-295-5p were found to consistently increase expression in DPSCs after expansion. HspB8 mRNA and/or protein were significantly decreased in the DPSCs after transfection of miR-215 and miR-219a-1-3p mimics; whereas no significant reduction was seen after transfecting let-7b-5p, miR-98-5p and miR-295-5p mimics. When subjecting the transfected DPSCs to osteogenic induction, reduction of calcium deposition or osteogenic marker expression were observed with miR-215, miR-219a-1-3p and miR-295-5p transfection. ConclusionsIncreased expression of miR-215 and miR-219a-1-3p downregulates HspB8 expression, which contributes to the reduction of osteogenic capability of DPSCs. Increased expression of miR295-5p also causes a reduction of osteogenic differentiation, but not involved in HspB8.

Covalent Decoration of Cortical Membranes with Graphene Oxide as a Substrate for Dental Pulp Stem Cells.

(1) Background: The aim of this study was to optimize, through a cheap and facile protocol, the covalent functionalization of graphene oxide (GO)-decorated cortical membrane (Lamina®) in order to promote the adhesion, the growth and the osteogenic differentiation of DPSCs (Dental Pulp Stem Cells); (2) Methods: GO-coated Laminas were fully characterized by Scannsion Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) analyses. In vitro analyses of viability, membrane integrity and calcium phosphate deposition were performed; (3) Results: The GO-decorated Laminas demonstrated an increase in the roughness of Laminas, a reduction in toxicity and did not affect membrane integrity of DPSCs; and (4) Conclusions: The GO covalent functionalization of Laminas was effective and relatively easy to obtain. The homogeneous GO coating obtained favored the proliferation rate of DPSCs and the deposition of calcium phosphate.

* Efficacy of a Self-Assembling Peptide Hydrogel, SPG-178-Gel, for Bone Regeneration and Three-Dimensional Osteogenic Induction of Dental Pulp Stem Cells.

The aim of this study was to assess the efficacy of a self-assembling peptide hydrogel as a scaffold for bone regeneration. We used a neutral and injectable self-assembling peptide hydrogel, SPG-178-Gel. Bone defects (5 mm in diameter) in rat calvarial bones were filled with a mixture of alpha-modified Eagle's medium and peptide hydrogel. Three weeks after surgery, soft X-ray and microcomputed tomography (micro-CT) images of the gel-treated bones showed new bone formations in the periphery and in central areas of the defects. Next, we evaluated the three-dimensional osteogenic induction of dental pulp stem cells (DPSCs), a type of mesenchymal stem cell, in SPG-178-Gel. We first confirmed that the osteogenic differentiation of DPSCs was significantly promoted by osteogenic induction medium containing recombinant human bone morphogenetic protein-4 (rhBMP-4) in a two-dimensional cell culture. Then, we verified DPSC proliferation and osteogenic differentiation in a three-dimensional cell culture using SPG-178-Gel. The gene expression levels of osteopontin, osteocalcin, and collagen type I were significantly increased when DPSCs were cultured in SPG-178-Gel with the osteogenic induction medium. Micro-CT observations showed the formation of widespread calcium deposition. In conclusion, SPG-178-Gel was adequately effective as a scaffold and can be a suitable tool for bone formation in vivo and in vitro. These findings suggest that the self-assembling peptide hydrogel, SPG-178-Gel, could be a promising tool for bone tissue engineering.

Influence of calcium and phosphorus release from bioactive glasses on viability and differentiation of dental pulp stem cells

The release of ions that can significantly contribute toward cellular response is an important characteristic of bioactive glasses (BG). Here, ionic extracts of three different compositions of BG powders in 60 mol% SiO2, x mol% CaO (x = 28, 32 and 36), x mol% P2O5 (x = 12, 8 and 4) compositional system were utilized to study their effect on the viability, differentiation and mineralization of dental pulp stem cells (DPSCs) in vitro. ICP was applied to detect the exact ionic concentrations released from different composition of BG. DPSCs treated with conditioned media from the glass with 4 mol% P2O5 (BGCM1, media containing 44.01 ± 0.6 mg/L Si, 61.72 ± 0.1 mg/L Ca and 7.57 ± 0.01 mg/L P) were more metabolically active compared to conditioned media from the glass with 8 mol% P2O5 (BGCM2, media with 47.36 ± 0.7 mg/L Si, 57.4 ± 0.1 mg/L Ca and 14.54 ± 0.2 mg/L P), at all times tested, but in all cases the process was slower than the control. Cells exposed to media conditioned by the glass with 12 mol% P2O5 (BGCM3, 40.46 ± 0.5 mg/L Si, 61. 85 ± 0.3 mg/L Ca and 28.43 ± 0.3 mg/L P) responded differently, such that cells showed to be more metabolically active than control at day 3, but then similar to or lower than control at higher time points. Differentiation of DPSCs toward osteogenic lineage in the presence of BGCM was assessed by Alizarin red staining. Cells treated with high phosphate BGCM3 displayed a higher density of red mineralized nodules than cells treated with BGCM1 and BGCM2 after 21 days of culture in non-osteogenic medium. BGCM3 was therefore chosen for gene expression studies. Osteogenic differentiation of DPSCs in the presence and/or absence of BGCM3 or osteogenic supplements were studied by RT-PCR. Overall, the results demonstrated that, in the absence of osteogenic supplements, BGCM3 group showed a significantly higher mRNA expression levels for alkaline phosphatase at day 7, osteopontin and osteonectin at days 7 and 14, and a high level of collagen I at day 14, compared to negative control group (BM−). Overall, the results obtained from BGCM3 group are beneficial for the design and manufacture of scaffolds or particulates with tailored ion release for a range of bone repair applications.

Differential mineralization of human dental pulp stem cells on diverse polymers.

In tissue engineering, biomaterials are used as scaffolds for spatial distribution of specific cell types. Biomaterials can potentially influence cell proliferation and extracellular matrix formation, both in positive and negative ways. The aim of the present study was to investigate and compare mineralized matrix production of human dental pulp stem cells (DPSC), cultured on 17 different well-characterized polymers. Osteogenic differentiation of DPSC was induced for 21 days on biomaterials using dexamethasone, L-ascorbic-acid-2-phosphate, and sodium β-glycerophosphate. Success of differentiation was analyzed by quantitative RealTime PCR, alkaline phosphatase (ALP) activity, and visualization of calcium accumulations by alizarin red staining with subsequent quantification by colorimetric method. All of the tested biomaterials of an established biomaterial bank enabled a mineralized matrix formation of the DPSC after osteoinductive stimulation. Mineralization on poly(tetrafluoro ethylene) (PTFE), poly(dimethyl siloxane) (PDMS), Texin, LT706, poly(epsilon-caprolactone) (PCL), polyesteramide type-C (PEA-C), hyaluronic acid, and fibrin was significantly enhanced (p<0.05) compared to standard tissue culture polystyrene (TCPS) as control. In particular, PEA-C, hyaluronic acid, and fibrin promoted superior mineralization values. These results were confirmed by ALP activity on the same materials. Different biomaterials differentially influence the differentiation and mineralized matrix formation of human DPSC. Based on the present results, promising biomaterial candidates for bone-related tissue engineering applications in combination with DPSC can be selected.

Effect of SOX2 on osteogenic differentiation of dental pulp stem cells.

To explore the effect of SOX2 on osteogenic differentiation of dental pulp stem cells (DPSCs) and to develop a new method for facilitating osteogenic differentiation of DPSCs. SOX2-overexpressing human DPSCs (DPSCs-SOX2) were established through retrovirus infection. Differentiation was induced with osteogenic differentiation medium and further evaluated by alkaline phosphatase (ALP) staining and qPCR. Following the differentiation procedure, the mechanism of SOX2 on osteogenic differentiation of DPSCs was analyzed using genome RNA microarray and flow cytometry. The normal DPSCs, DPSCs-vector, and DPSCs-SOX2 were capable of osteogenic differentiation after 3-4 weeks of introduction and positive for ALP staining. Compared to DPSCs and DPSCs-vector, DPSCs-SOX2 exhibited higher levels of osteogenic gene expression (ALP, collagen I, Runx2, and osterix), indicating the superiority of DPSCs-SOX2 in osteogenic differentiation. Moreover, SOX2 overexpression resulted in the activation of the Hippo signal pathway and increased expressions of the BMPs family. SOX2 promotes the osteogenic differentiation of DPSCs by regulating the osteogenic genes and BMPs family, suggesting the therapeutic potential in bone repair.