Osteoblast Proliferation Research Articles

Self-assembling peptide hydrogel scaffold integrating stem cell-derived exosomes for infected bone defects

Infected bone defect (IBD) is a great challenge in orthopedics, which involves in bone loss and infection. Here, a self-assembling hydrogel scaffold (named AMP-RAD/EXO), integrating antimicrobial peptides(AMPs), RADA16 and BMSCs exosomes with an innovative strategy, is developed and applied in IBD treatment for sustained antimicrobial ability, accelerating osteoblasts proliferation and promoting bone regeneration. AMPs present an excellent ability to inhibit infection, RADA16 is a self-assembling peptide hydrogel for AMPs delivery, and BMSCs exosomes can promote the bone regeneration. The prepared AMP-RAD/EXO exhibited a polyporous 3D structure for imbibition of BMSCs exosomes and migration of osteoblasts. In vitro studies indicate AMP-RAD/EXO can inhibit the growth of Staphylococcus aureus, accelerate the proliferation and migration of BMSCs. More importantly, in vivo results also prove that AMP-RAD/EXO exhibit an excellent effect on IBD treatment. Thus, the prepared AMP-RAD/EXO provides a multifunctional scaffold concept for bone tissue engineering technology.

The water-soluble TF3 component from Eupolyphaga sinensis Walker promotes tibial fracture healing in rats by promoting osteoblast proliferation and angiogenesis

ObjectiveTo determine the active components of Eupolyphaga sinensis Walker (Tu Bie Chong) and explore the mechanisms underlying its fracture-healing ability. MethodsA modified Einhorn method was used to develop a rat tibial fracture model. Progression of bone healing was assessed using radiological methods. Safranin O/fast green and CD31 immunohistochemical staining were performed to evaluate the growth of bone cells and angiogenesis at the fracture site. Methylthiazoletetrazolium blue and wound healing assays were used to analyze cell viability and migration. The Transwell assay was used to explore the invasion capacity of the cells. Tubule formation assays were used to assess the angiogenesis capacity of human vascular endothelial cells (HUVECs). qRT-PCR was used to evaluate the changes in gene transcription levels. ResultsTu Bie Chong fraction 3 (TF3) significantly shortened the fracture healing time in model rats. X-ray results showed that on day 14, fracture healing in the TF3 treatment group was significantly better than that in the control group (P = .0086). Tissue staining showed that cartilage growth and the number of H-shaped blood vessels at the fracture site of the TF3 treatment group were better than those of the control group. In vitro, TF3 significantly promoted the proliferation and wound healing of MC3T3-E1s and HUVECs (all P < .01). Transwell assays showed that TF3 promoted the migration of HUVECs, but inhibited the migration of MC3T3-E1 cells. Tubule formation experiments confirmed that TF3 markedly promoted the ability of vascular endothelial cells to form microtubules. Gene expression analysis revealed that TF3 significantly promoted the expression of VEGFA, SPOCD1, NGF, and NGFR in HUVECs. In MC3T3-E1 cells, the transcript levels of RUNX2 and COL2A1 were significantly elevated following TF3 treatment. ConclusionTF3 promotes fracture healing by promoting bone regeneration associated with the RUNX2 pathway and angiogenesis associated with the VEGFA pathway.

Indirect co-culture of osteoblasts and endothelial cells in vitro based on a biomimetic 3D composite hydrogel scaffold to promote the proliferation and differentiation of osteoblasts.

The field of orthopedics has long struggled with the challenge of repairing and regenerating bone defects, which involves a complex process of osteogenesis requiring coordinated interactions among different types of cells. The crucial role of endothelial cells and osteoblasts in bone vascularization and osteogenesis underscores the importance of their intimate interaction. However, efforts to bioengineer bone tissue have been impeded by the difficulty in establishing proper angiogenesis and osteogenesis in tissue structures. This study presents a novel approach to bone tissue engineering, involving a three-dimensional composite hydrogel scaffold composed of sodium alginate microspheres encapsulated in type I collagen. Using this scaffold, a three-dimensional indirect co-culture system was established for osteoblasts and endothelial cells to evaluate the osteogenic differentiation potential of osteoblasts. Results demonstrate that the non-contact co-culture system of endothelial cells and osteoblasts constructed by the composite hydrogel scaffold loaded with microspheres holds promise for bone tissue engineering. The innovative concept of an indirect co-culture system presents exciting prospects for conducting intercellular communication studies and offers a valuable in vitro tissue platform to investigate tissue regeneration.

Regulation of Glycosylation in Bone Metabolism.

Glycosylation plays a crucial role in the maintenance of homeostasis in the body and at the onset of diseases such as inflammation, neurodegeneration, infection, diabetes, and cancer. It is also involved in bone metabolism. N- and O-glycans have been shown to regulate osteoblast and osteoclast differentiation. We recently demonstrated that ganglio-series and globo-series glycosphingolipids were essential for regulating the proliferation and differentiation of osteoblasts and osteoclasts in glycosyltransferase-knockout mice. Herein, we reviewed the importance of the regulation of bone metabolism by glycoconjugates, such as glycolipids and glycoproteins, including our recent results.

Synchronous Low-Grade Central Osteosarcoma and Ewing Sarcoma: A Rare Case Report.

A 23-year-old female patient presented with radicular back pain, perineal numbness, and urinary retention. The patient was diagnosed with cauda equina syndrome and magnetic resonance imaging (MRI) of the spine revealed an enhancing osseous lumbar lesion causing severe central stenosis. A core needle biopsy of the lumbar spine showed microscopic features compatible with a small round blue cell tumor. CD99 and FLI1 were positive in the tumor cells. Next-generation sequencing demonstrated a EWSR1::FLI1 fusion. Given these findings, the spine lesion was diagnosed as Ewing sarcoma. The patient underwent surgical decompression of L2. On further workup, an MRI revealed an ill-defined enhancing mass of the right distal femur. This area was biopsied, demonstrating a fibro-osseous lesion with osteoblast proliferation containing nuclear atypia, low mitotic activity, and SATB2 positivity, diagnosed as low-grade central osteosarcoma (LGCOS). The patient underwent resection, which showed a classic LGCOS by histomorphology. Although fluorescence in-situ hybridization study for MDM2 gene amplification was negative, the overall findings are most consistent with LGCOS. These neoplasms are considered to be synchronous due to the presentation of each entity within 6 months. Considering the aggregate yearly incidence of Ewing sarcoma (approximately 1 case per 750 000 per year) and LGCOS (approximately 1 case per 10 million per year), the aggregate yearly probability of developing both of these genetically unrelated tumors in a single individual is 1 per 7.5 trillion per year, and it is likely such an event has never happened in the past.

Retracted: The Anatase Phase of Nanotopography Titania with Higher Roughness Has Better Biocompatibility in Osteoblast Cell Morphology and Proliferation.

[This retracts the article DOI: 10.1155/2020/8032718.].

Elucidating the role of the GC/GR/GLUT1 axis in steroid-induced osteonecrosis of the femoral head: A proteomic approach

BackgroundSteroid-induced osteonecrosis of the femoral head (SONFH) is a prevalent and incapacitating condition that affects the hip joint. Unfortunately, early diagnostic and treatment measures are limited. MethodsOur study employed Tandem Mass Tag (TMT) labeling mass spectrometry (MS)-based quantitative proteome to compare the proteins of femoral head tissues in patients with SONFH with those of patients who sustained femoral neck fracture (FNF). We investigated the level and effects of glucose transporter member 1 (GLUT1) in SONFH patients and MC3T3-E1 cells and examined the function and molecular mechanism of GLUT1 in the context of SONFH using in vivo and in vitro approaches. ResultsThe SONFH group exhibited significant changes in protein expression levels compared to the fracture group. Specifically, we observed the up-regulation of 86 proteins and the down-regulation of 138 proteins in the SONFH group. Among the differentially expressed proteins, GLUT1 was down-regulated and associated with glucose metabolic processes in the SONFH group. Further analysis using Parallel Reaction Monitoring (PRM), WB, and PCR confirmed that the protein was significantly down-regulated in both femoral head tissue samples from SONFH patients and dexamethasone-treated MC3T3-E1 cells. Moreover, overexpression of GLUT1 effectively reduced glucocorticoid (GC)-induced apoptosis and the suppression of osteoblast proliferation and osteogenic differentiation in MC3T3-E1 cells, as well as GC-induced femoral head destruction in GC-induced ONFH rat models. Additionally, our research demonstrated that GC down-regulated GLUT1 transcription via glucocorticoid receptors in MC3T3-E1 cells. ConclusionsGLUT1 was down-regulated in patients with SONFH; furthermore, down-regulated GLUT1 promoted apoptosis and inhibited osteoblast ossification in dexamethasone-induced MC3T3-E1 cells and contributed to GC-induced femoral head destruction in a SONFH rat model. Glucocorticoids inhibited the transcriptional activity of GLUT1, leading to a reduction in the amount and activity of GLUT1 in the cells and ultimately promoting apoptosis and inhibiting osteoblast ossification via the GC/GR/GLUT1 axis in SONFH.

Influence of Ultrasound on the Characteristics of CaP Coatings Generated Via the Micro-arc Oxidation Process in Relation to Biomedical Engineering.

Over the past decade, bone tissue engineering has been at the core of attention because of an increasing number of implant surgeries. The purpose of this study was to obtain coatings on titanium (Ti) implants with improved properties in terms of biomedical applications and to investigate the effect of ultrasound (US) on these properties during the micro-arc oxidation (MAO) process. The influence of various process parameters, such as time and current density, as well as US mode, on the properties of such coatings was evaluated. Novel porous calcium-phosphate-based coatings were obtained on commercially pure Ti. Their microstructure, chemical composition, topography, wettability, nanomechanical properties, thickness, adhesion to the substrate, and corrosion resistance were analyzed. In addition, cytocompatibility evaluation was checked with the human osteoblasts. The properties of the coatings varied significantly, depending on applied process parameters. The US application during the MAO process contributes to the increase of coating thickness, porosity, roughness, and skewness, as well as augmented calcium incorporation. The most advantageous coating was obtained at a current of 136 mA, time 450 s, and unipolar rectangular US, as it exhibits high porosity, adequate wettability, and beneficial skewness, which enabled increased adhesion and proliferation of osteoblasts during in vitro studies. Finally, the conducted research demonstrated the influence of various UMAO process parameters, which allowed for the selection of appropriate Ti implant modification for specific biomedical utilization.

Interaction between p21-activated kinase 4 and β-catenin as a novel pathway for PTH-dependent osteoblast activation.

Parathyroid hormone (PTH) serves dual roles in bone metabolism, exhibiting both anabolic and catabolic effects. The anabolic properties of PTH have been utilized in the treatment of osteoporosis with proven efficacy in preventing fractures. Despite these benefits, PTH can be administered therapeutically for up to 2 years, and its use in patients with underlying malignancies remains a subject of ongoing debate. These considerations underscore the need for a more comprehensive understanding of the underlying mechanisms. p21-activated kinase 4 (PAK4) is involved in bone resorption and cancer-associated osteolysis; however, its role in osteoblast function and PTH action remains unknown. Therefore, in this study, we aimed to clarify the role of PAK4 in osteoblast function and its effects on PTH-induced anabolic activity. PAK4 enhanced MC3T3-E1 osteoblast viability and proliferation and upregulated cyclin D1 expression. PAK4 also augmented osteoblast differentiation, as indicated by increased mineralization found by alkaline phosphatase and Alizarin Red staining. Treatment with PTH (1-34), an active PTH fragment, stimulated PAK4 expression and phosphorylation in a protein kinase A-dependent manner. In addition, bone morphogenetic protein-2 (which is known to promote bone formation) increased phosphorylated PAK4 (p-PAK4) and PAK4 levels. PAK4 regulated the expression of both phosphorylated and total β-catenin, which are critical for osteoblast proliferation and differentiation. Moreover, p-PAK4 directly interacted with β-catenin, and disruption of β-catenin's binding to T-cell factor impaired PAK4- and PTH-induced osteoblast differentiation. Our findings elucidate the effect of PAK4 on enhancing bone formation in osteoblasts and its pivotal role in the anabolic activity of PTH mediated through its interaction with β-catenin. These insights improve the understanding of the mechanisms underlying PTH activity and should inform the development of more effective and safer osteoporosis treatments.

Scratch resistance and in-vitro biocompatibility of plasma-sprayed baghdadite coatings reinforced with carbon nanotubes

Hydroxyapatite (HA, Ca10(PO4)6(OH)2) coatings, commonly used for metallic implants, have limitations such as excessive brittleness, low fracture toughness, inadequate wear resistance, and slow osseointegration properties. In contrast, baghdadite (BAG, Ca3ZrSi2O9), a calcium zirconium silicate-based bioceramic, exhibits outstanding biological properties, to promote cell proliferation and differentiation of human osteoblasts along with adequate mechanical strength. In this study, plasma-sprayed HA, BAG, and carbon nanotubes (CNT, 1 wt%, and 2 wt%) reinforced BAG coatings are deposited on titanium (Ti) substrate to enhance its mechanical as well as biological properties. The microhardness values of CNT-reinforced BAG coatings increase due to a decrease in porosity and the retention of CNT inside the BAG matrix. Progressive loading scratch tests are performed, revealing a reduction in wear volume loss from 15.051 mm3 to 12.574 mm3 and scratch rate from 43.262 mm3N−1 m−1 to 36.172 mm3N−1 m−1 with the addition of 2 wt% CNT in BAG coatings. The scratch hardness test results demonstrated that introducing CNT into BAG coating significantly enhances its performance, showing a remarkable 38.7 % improvement. In-vitro cell culture studies indicate excellent cell adhesion, growth, and proliferation of MC3T3-E1 osteoblast cells on the surfaces of the CNT-reinforced BAG coatings.

Tailored thymoquinone intercalated Layered Double Hydroxide (LDH) nanocomposites to accelerate mineralization for enhanced osteogenesis

The tunable nature of two-dimensional nanostructured Layered Double Hydroxides [LDH] and their effective intercalation ability with biomolecules make them inevitable functional hybrid materials for versatile biomedical applications. In an attempt to meet the limitations in existing bone reconstruction practice, the present work reports the synthesis of zinc and iron-based LDH [Zn-Fe LDH] and its subsequent intercalation with thymoquinone [TQ-Zn-Fe LDH] to augment osteoblastic differentiation and proliferation for accelerated bone mineralization. Structural studies depicted the polycrystalline and amorphous nature of ZnFe LDH and TQ-Zn-Fe LDH respectively. The biocompatible nature of LDHs was proven by negative cytotoxicity, cell adhesion, and proliferation assays studied in MG-63 cell lines. Gene expression studies of the nanocomposites showed a fold change of 5–10 in osteoblastic differentiation and proliferation. However, TQ-Zn-Fe LDH treated cells showed significantly higher protein translation levels of osteogenesis markers and elevated alkaline phosphatase secretion and calcium deposition on day 21, confirming their osteogenic efficiency. Thus, acquired results speculate the osteogenic potential of thymoquinone intercalated TQ-Zn-Fe-LDH to meet the limitations in bone reconstruction practice.

Mechanical and Architectural Changes in Animal Bone Following Fast Neutron Irradiation.

Damage to healthy bone following exposure to ionizing radiation has been well documented for at least seven decades. Among the reported effects are a transient increase in stiffness and a reduction in breaking strength. These changes have been linked to a decrease in osteoblast proliferation and differentiation, inducing cell cycle arrest, reducing collagen production, and increasing sensitivity to apoptotic agents. In this work, we analyzed some mechanical and structural changes in compact costal bovine bone (Hereford breed, n = 9) subjected to escalating doses of fast neutrons from a 7 Li(p,n) 7 Be reaction. The mean neutron energy was 233 keV with calculated absorbed doses ranging from 0 to 4.05 ± 10% Gy. Samples were subjected to Young's Modulus (YM) and breaking strength testing with a Universal Testing Machine (UTM). We found an increase in Young's Modulus and a decrease in breaking strength as functions of increasing dose equivalent. Optical coherence tomography (OCT) revealed trabecular displacement into compact bone in an irradiated sample (D = 4.05 ± 10% Gy), with breaching of the endosteal wall. OCT further revealed a "crack-like" structure across the irradiated sample, potentially consistent with damage from a proton track resulting from an elastic (n,p) reaction. No previous report has been found on mechanical changes in large mammalian bones following fast neutron doses, nor of the OCT imaging of such samples.

Deficiency of protein C or protein S as a possible cause of osteoporosis.

Proteins C and S are vitamin K-dependent anticoagulative factors that also exert a significant influence on bone quality. Clinical studies have linked the deficiency of proteins C and S to lower bone mineral density and the onset of femoral head osteonecrosis in children. Rare foundational studies analyzing this topic have demonstrated that activated protein C, upon binding to the endothelial protein C receptor expressed on the surface of osteoblasts, promotes osteoblast proliferation. It is also established that proteins C and S play crucial roles in proper collagen synthesis and in maintaining the number of osteoclasts and blood vessels. However, the association between protein C and/or S deficiency and the gradual onset of osteoporosis remains largely uninvestigated. Calculations based on data from peer-reviewed journals suggest that approximately one in every 10 individuals may develop osteoporosis due to congenital protein C or S deficiency. Moreover, when secondary causes of protein C and S deficiency are also considered, the proportion likely further increases. In this paper, we discuss the pathophysiological background of the potential relationship between protein C and S deficiency and the genesis of osteoporosis.

Multilayer Electrospun Scaffolds of Opposite-Charged Chitosans.

Chitosan (CS) is a polysaccharide obtainable by the deacetylation of chitin, which is highly available in nature and is consequently low-cost. Chitosan is already used in the biomedical field (e.g., guides for nerve reconstruction) and has been proposed as a biomaterial for tissue regeneration in different body districts, including bone tissue. The interest in chitosan as a biomaterial stems from its ease of functionalization due to the presence of reactive groups, its antibacterial properties, its ease of processing to obtain porous matrices, and its inherent similarity to polysaccharides that constitute the human extracellular matrix, such as hyaluronic acid (HA). Here, chitosan was made to react with succinic anhydride to develop a negatively charged chitosan (SCS) that better mimics HA. FT-IR and NMR analyses confirmed the presence of the carboxylic groups in the modified polymer. Four different electrospun matrices were prepared: CS, SCS, a layer-by-layer matrix (LBL), and a matrix with both CS and SCS simultaneously electrospun (HYB). All the matrices containing SCS showed increased human osteoblast proliferation, mineralization, and gene expression, with the best results obtained with HYB compared to the control (CS). Moreover, the antibacterial potential of CS was preserved in all the SCS-containing matrices, and the pure SCS matrix demonstrated a significant reduction in bacterial proliferation of both S. aureus and E. coli.

Chlorogenic acid prevents ovariectomized-induced bone loss by facilitating osteoblast functions and suppressing osteoclast formation.

Osteoporosis is a usual bone disease in aging populations, principally in postmenopausal women. Anti-resorptive and anabolic drugs have been applied to prevent and cure osteoporosis and are associated to a different of adverse effects. Du-Zhong is usually applied in Traditional Chinese Medicine to strengthen bone, regulate bone metabolism, and treat osteoporosis. Chlorogenic acid is a major polyphenol in Du-Zhong. In the current study, chlorogenic acid was found to enhance osteoblast proliferation and differentiation. Chlorogenic acid also inhibits the RANKL-induced osteoclastogenesis. Notably, ovariectomy significantly decreased bone volume and mechanical properties in the ovariectomized (OVX) rats. Administration of chlorogenic acid antagonized OVX-induced bone loss. Taken together, chlorogenic acid seems to be a hopeful molecule for the development of novel anti-osteoporosis treatment.

Silk-Fabric Reinforced Silk for Artificial Bones.

Bone implants for different body parts require varying mechanical properties, dimensions, and biodegradability rates. Currently, it is still challenging to produce artificial bones with perfect compatibility with human bones. In this study, a silk-fabric reinforced silk material (SFS) composed of pure silk with exceptional biocompatibility, osteogenesis, and biodegradability is reported, and demonstrates its outstanding performance as a bone implant material. The SFS is fabricated using a simple hot-pressing technique, with degummed silk fabric as the reinforcement and silk fibroin as the matrix. The SFS as a self-reinforced composite, has exceptional mechanical properties due to the almost perfect interface between the matrix and reinforcement. More importantly, its mechanical properties, biodegradability rates, and density can be tailored by adjusting the reinforcement structure and the ratio of the reinforcement to the matrix to align with the requirements for bone implantation in different parts of the human body. Besides, the SFS can improve osteoblastic proliferation and increase osteogenic activity, which is not the case with clinically used titanium alloy artificial bone. Therefore, the SFS holds significant potential to replace conventional metal or ceramic implants in the field of medical fracture repair.

Simvastatin-loaded 3D aerogel scaffolds promote bone regeneration.

It is imperative to design a suitable material for bone regeneration that emulates the microstructure and compositional framework of natural bone while mitigating the shortcomings of current repair materials. The aim of the study is to synthesize a 3D aerogel scaffold composed of PLCL/gelatin electro-spun nanofiber loaded with Simvastatin and investigate its biocompatibility as well as its performance in cell proliferation and ossification differentiation. PLCL/gelatin nanofibers were fabricated in coaxial electrospinning with simvastatin added. Fibers were fragmented, pipetted into molds, frozen, and dried. The morphology of fibers and contact angles in 4 groups of PLCL, PLCL@S, 3D-PLCL, and 3D-PLCL@S was observed and compared. MC3T3-E1 cells were planted at the four materials to observe cell growth status, and ALP and ARS tests were conducted to compare the ossification of cells. TEM scanning showed the coaxial fiber of the inner PLCL and outer gelatin. The mean diameter of the PLCL/gelatin fibers is 561 ± 95nm and 631 ± 103nm after the drug loading. SEM showed the fibers in the 3D-PLCL@S group were more curled and loose with more space interlaced. The contact angle in this group was 27.1°, the smallest one. Drug release test demonstrated that simvastatin concentration in the 3D-PLCL@S could remain at a relatively high level compared to the control group. The cell proliferation test showed that MC3T3-EI cells could embed into the scaffold deeply and exhibit higher viability in the 3D-PLCL@S group than other groups. The ossification tests of ALP and ARS also inferred that the 3D-PLCL@S scaffold could offer a better osteogenic differentiation matrix. The PLCL/gelatin aerogel scaffold, when loaded with Simvastatin, demonstrates a more pronounced potential in enhancing osteoblast proliferation and osteogenic differentiation. We hypothesize that this scaffold could serve as a promising material for addressing bone defects.

The Effect of Silk Fibroin/Poly(Lactic-Co-Glycolic Acid) Nanofiber Coating on Porous Calcium Phosphate-Based Composites for Osteoporosis Application

This study observed whether the silk fibroin/poly lactic-co-glycolic acid (SF/PLGA) nanofiber membrane three-dimensionally coated with porous calcium phosphate-based composite can promote the proliferation of osteoblasts, thereby improving osteoporosis. The SF/PLGA nanofiber membrane was used to three-dimensionally coated with the porous calcium phosphate-based composite to analyze proliferation of osteoblasts, hFOB1.19 expressions by Western blot, activity change of hFOB1.19 by CCK-8 assay. The morphology was observed with an electron microscope. Alizarin Red staining showed that the SF/PLGA nanofiber membrane three-dimensionally coated with porous calcium phosphatebased composite promoted osteogenic differentiation and upregulated the expression of osteogenic related genes. It inhibited adipogenic differentiation and the expression of adipogenic genes. SF/PLGA composite material promoted the viability of osteoblasts hFOB1.19, upregulatedGLUT3, downregulated the expression of various apoptosis-related proteins in hFOB1.19. SF/PLGA composite material can reduce the apoptosis efficiency of osteoblasts, promote the proliferation of osteoblasts, and inhibit apoptosis, thereby improving osteoporosis.

Leaf‐Mimicking Superstructured Porous Membrane with Multiple Bioactive Pro‐Healing Functions for Effective Guided Bone Regeneration

AbstractBarrier membrane, a key material for guided bone regeneration surgery, is applied between soft and hard tissue interfaces in complex oral environment. The abilities to integrate contradictory requirements and self‐regulate the local microenvironment are highly desirable for barrier membrane but remain challenging to achieve. Herein, inspired by the leaf's hierarchical multifunctional synergy, a kind of superstructured porous membrane (SPM), integrating asymmetric surface pores, interconnected macropores and functional micropores, is developed based on the combination of breath figure and phase separation. For the SPM, the densely porous layer can inhibit penetration of soft tissue cells and maintain osteogenic space, and the loosely porous layer with interconnected microporous channels can effectively promote the adhesion and proliferation of osteoblasts, help to transport nutrients, and expose functional components. Meanwhile, porous carbon nanospheres introduced into SPM as multifunctional core components can ameliorate the undesirable microenvironment by scavenging reactive oxygen species, repairing bioelectrical environment, and killing bacteria, thus achieving multiple bioactive pro‐healing functions for efficient bone regeneration in vivo. These findings can open an appealing avenue for developing high‐performance barrier membranes as well as many other implant materials.

Comparing the osteogenesis outcomes of different lumbar interbody fusions (A/O/X/T/PLIF) by evaluating their mechano-driven fusion processes

BackgroundIn lumbar interbody fusion (LIF), achieving proper fusion status requires osteogenesis to occur in the disc space. Current LIF techniques, including anterior, oblique, lateral, transforaminal, and posterior LIF (A/O/X/T/PLIF), may result in varying osteogenesis outcomes due to differences in biomechanical characteristics. MethodsA mechano-regulation algorithm was developed to predict the fusion processes of A/O/X/T/PLIF based on finite element modeling and iterative evaluations of the mechanobiological activities of mesenchymal stem cells (MSCs) and their differentiated cells (osteoblasts, chondrocytes, and fibroblasts). Fusion occurred in the grafting region, and each differentiated cell type generated the corresponding tissue proportional to its concentration. The corresponding osteogenesis volume was calculated by multiplying the osteoblast concentration by the grafting volume. ResultsTLIF and ALIF achieved markedly greater osteogenesis volumes than did PLIF and O/XLIF (5.46, 5.12, 4.26, and 3.15 cm3, respectively). Grafting volume and cage size were the main factors influencing the osteogenesis outcome in patients treated with LIF. A large grafting volume allowed more osteoblasts (bone tissues) to be accommodated in the disc space. A small cage size reduced the cage/endplate ratio and therefore decreased the stiffness of the LIF. This led to a larger osteogenesis region to promote osteoblastic differentiation of MSCs and osteoblast proliferation (bone regeneration), which subsequently increased the bone fraction in the grafting space. ConclusionTLIF and ALIF produced more favorable biomechanical environments for osteogenesis than did PLIF and O/XLIF. A small cage and a large grafting volume improve osteogenesis by facilitating osteogenesis-related cell activities driven by mechanical forces.