Orthogonal Frequency Division Research Articles

Sub-System Architecture for millimeter-wave massive MIMO systems

In this paper, we study the hybrid beamforming design for millimeter-wave (mmWave) massive multiple-input multiple-output (mMIMO) systems. The designing of hybrid beamforming for orthogonal frequency-division multiplexing (OFDM) systems is tasking since its analog beamforming is shared among all subcarriers. We adopt a two-step technique for designing the analog and digital beamforming separately in order to maximize the average achievable energy and spectral efficiency of frequency-selective mmWave mMIMO-OFDM systems. Firstly, the analog beamforming design is based on the viewpoint of sub-systems (SS) and the goal is to optimize the array gain and radio frequency chains. Secondly, the digital beamforming design is carried out by using the regularized channel diagonalization (RCD) and block diagonalization (BD) solutions. On the other hand, the BD solution is modified for single-user. Thus, we propose the use of SS-RCD for multi-user and SS-BD for single-user hybrid beamforming designs. The solutions provide interference suppression but differ in low-SNR performance when communicating to many mobile users via data streams. Simulation results present that our hybrid beamforming design outperforms several other designs.

Novel Waveform Design with a Reduced Cyclic Prefix in MIMO Systems

For well-known orthogonal frequency division multiplexing (OFDM), the cyclic prefix (CP) is essential for coping with multipath channels. Nevertheless, CP is a pure redundant signal, which wastes valuable time–frequency resources. We propose a novel waveform based on symbol repetition, which is presented to cut down the CP overhead in OFDM. In the presented OFDM with symbol repetition (SR-OFDM), one CP is inserted in the front of several transmitted symbols, instead of only one symbol, as in the conventional way. As a result, it can save the overhead created by CP. Furthermore, due to the existence of the remaining CP, the multipath channel can still be converted into the frequency domain, and single-tap equalization can still be used to equalize information free from interference. In addition, we also extend the proposed SR-OFDM into multiple input–multiple output (MIMO) systems. Finally, the proposed schemes are validated by computer simulations under the various channels.

Exploring and Analyzing a Hybrid PAPR Reduction Method for OFDM Optimization

Orthogonal Frequency Division Multiplexing (OFDM) is a effective modulation technique widely used in modern communication systems, including 5G and wireless networks because of its high spectral efficiency and robustness towards multipath fading. However, OFDM signals are characterized by a high Peak-to-Average Power Ratio (PAPR), which can severely impact the power efficiency and operational cost of these systems. This research investigates and analyse effectiveness of two conventional PAPR reduction methods that is Selective Mapping (SLM), and Partial Transmit Sequence (PTS) with incorporating their approach of PAPR reduction to develop a hybrid variant: SLM-PTS. This study utilized MATLAB simulations to implement and test each PAPR reduction technique on a standard OFDM system model. Parameters such as the number of subcarriers, oversampling factor, and modulation types were systematically varied to analyze the impact on PAPR, BER, and computational complexity. The effectiveness of each technique was measured using the Complementary Cumulative Distribution Function (CCDF) of PAPR values and BER performance under different channel conditions. Key findings reveal that hybrid techniques, particularly SLM & PTS, offer significant improvements in PAPR reduction compared to traditional methods alone, without a corresponding increase in BER or computational overhead. The research underscores the potential of hybrid PAPR reduction techniques to significantly enhance the efficiency and reliability of OFDM systems. These findings have important implications for the design and optimization of next-generation wireless communication systems, suggesting that hybrid approaches can provide a balanced solution to the longstanding issue of PAPR in OFDM transmissions. This study contributes valuable insights into the practical application of combined PAPR reduction strategies, offering a pathway toward more power-efficient and robust OFDM technologies. Keywords : OFDM, PAPR, CCDF, SLM and PTS

Sparse Reconstruction-Based Joint Signal Processing for MIMO-OFDM-IM Integrated Radar and Communication Systems

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) technology is widely used in integrated radar and communication systems (IRCSs). Moreover, index modulation (IM) is a reliable OFDM transmission scheme in the field of communication, which transmits information by arranging several distinguishable constellations. In this paper, we propose a sparse reconstruction-based joint signal processing scheme for integrated MIMO-OFDM-IM systems. Combining the advantages of MIMO and OFDM-IM technologies, the integrated MIMO-OFDM-IM signal design is realized through the reasonable allocation of bits and subcarriers, resulting in better intercarrier interference (ICI) resistance and a higher transmission efficiency. Taking advantage of the sparseness of OFDM-IM, an improved target parameter estimation method based on sparse signal reconstruction is explored to eliminate the influence of empty subcarriers on the matched filtering at the receiver side. In addition, an improved sequential Monte Carlo signal detection method is introduced to realize the efficient detection of communication signals. The simulation results show that the proposed integrated system is 5 dB lower in the peak sidelobe ratio (PSLR) and 1.5 ×105 lower in the number of complex multiplications than the latest MIMO-OFDM system and can achieve almost the same parameter estimation performance. With the same spectral efficiency, it has a lower bit error rate (BER) than existing methods.

High-security multidimensional data protection system based on the Hartley algorithm-driven chaotic scheme

This paper proposes a high-security multidimensional data protection system based on the Hartley algorithm-driven chaotic scheme. We utilize the fast Hartley algorithm instead of the fast fourier computation, and we employ chaotic sequences generated by the multi-winged chaotic system to achieve chaos-driven 3D constellation mapping, effectively integrating the chaotic system with the stochastic amplitude modulator. We reduce the signal’s peak-to-average power ratio (PAPR) by deploying a random amplitude modulator. Simultaneously, this approach enhances the security of the physical layer of the signal. The PAPR reduction can reach up to 2.6 dB, while the most robust and stable modulator scheme can gain 2 dB. Finally, in the Hartley frequency domain, the signal's frequency is disrupted, providing the entire system with a key space of 10131 to resist violent cracking and thus improving the system's overall security. To validate the feasibility of our scheme in comparison to conventional IFFT-based encrypted 3D orthogonal frequency division multiplexing, We achieved a transmission rate of 27.94 Gb/s over a 2 km multicore fiber. Experimental results show that since the random amplitude generator effectively reduces PAPR, our proposed encryption scheme increases the forward error correction threshold range by 1.1 dB, verifying that our proposed scheme has highly reliable security performance.

Recovery of missing samples in Orthogonal Frequency Division Multiplexing signals with optimisation using data carriers

AbstractA method is proposed for reconstructing an Orthogonal Frequency Division Multiplexing (OFDM) signal that contains data gaps, with the aim to improve demodulation. The main objective is to use the method in a passive radar application with missing data samples and to improve target detection. The OFDM signal is assumed to comply with the Digital Video Broadcasting Terrestrial standard. The proposed recovery method is based on optimisation of a novel objective function, which consists of two parts. The first part is a function of the energy in the out‐of‐band frequencies, whereas the second, and novel part, uses the location of data carriers in the constellation diagram. The method is evaluated using both simulations and real data. The authors show that the proposed method significantly improves the OFDM signal in just a few iteration steps. The proposed method improved the condition number more than a factor ten thousand millions compared to using the least square method on the out‐of‐band frequencies only. The authors also decode the symbols with the Viterbi decoding algorithm and show how the required number of iterations with the proposed algorithm depends on the amount of missing samples and on the Signal‐to‐Noise Ratio in order to achieve a Bit Error Rate of less than one in one hundred thousand millions.

Design of OFDM‐based two‐wire bus communication system for fire safety

SummaryIntelligent fire safety systems place higher demands on the speed and reliability of data communication between sensors, controllers, and other devices. The two‐wire bus has become a significant trend in developing fire safety communication systems because of its low cost and simple maintenance. This paper proposes a two‐wire bus communication system for fire safety based on orthogonal frequency division multiplexing (OFDM) technology. First, we introduce the low‐voltage power line channel model and conduct relevant simulations, providing the conditions for subsequent simulation work. Then, we design the system's transmission and reception schemes, provide the parameters, and introduce each technology used. Finally, we conducted system simulations based on three different channel models, and the system performance is compared among different encoding, modulation, and channel estimation methods. The simulation results show that the system designed in this paper has superior performance compared with other systems and can meet the requirements of intelligent fire safety systems for communication speed and reliability.

P-LDPC coded image transmission with OFDM over underwater acoustic channel

Underwater environment is still an attractive area to explore and exploit by human beings. However, underwater characteristics limit communications due to harsh channel conditions, and efficient channel codes are essential to deploy. This study presents an underwater system based on protograph low-density parity check (P-LDPC) codes and orthogonal frequency division multiplexing (OFDM) for image transmission. The system proves a successful reconstruction of P-LDPC coded images with different levels of comparison. The performance of the proposed system is evaluated using nine objective measures such as bit error rate (BER) and peak signal to noise ratio (PSNR). Firstly, the proposed system performance is evaluated with different block lengths of P-LDPC code. Then, the implemented system shows a coding gain of approximately 1.75 dB for applying P-LDPC when compared to polar with cyclic redundancy check at 0.0001 BER. Additionally, image subjective assessment is obtained to demonstrate how the P-LDPC outweighs polar and turbo product codes in terms of estimated image quality. Lastly, further investigation is performed to study the effect of varying fast Fourier transform (FFT) size and cyclic prefix (CP) length on image reserved quality. The results show that the received image is better reconstructed for larger FFT sizes since that produce longer CP and symbol duration, and that in turn helps the system to combat the multipath fading introduced by the underwater channel.

Cross-Water–Air Optical Wireless Communication Using Orthogonal Time–Frequency Space Modulation

This paper examines the communication difficulties encountered in cross-media wireless optical transmission through simulated research on the utilization of orthogonal time and frequency space (OTFS) modulation technology. Our analysis and comparison demonstrate that OTFS significantly improves the reliability and throughput of data transmission in intricate multipath channel settings. In contrast to conventional orthogonal frequency division multiplexing (OFDM) technology, OTFS displays better resilience and transmission effectiveness. We foresee additional enhancements and progress in OTFS technology to present a sturdier and more efficient resolution for wireless communication, thereby providing valuable perspectives and encouragement for associated research initiatives. Our results underscore the capability of OTFS technology to transform wireless communication systems in demanding multipath channel conditions.

Optical-OFDM VLC System: Peak-to-Average Power Ratio Enhancement and Performance Evaluation

Visible Light Communication (VLC) systems are favoured for numerous applications due to their extensive bandwidth and resilience to electromagnetic interference. This study delineates various constructions of Optical Orthogonal Frequency Division Multiplexing (O-OFDM) approaches employed in VLC systems. Various factors are elaborated within this context to ascertain a more effective O-OFDM approach, including constellation size, data arrangement and spectral efficiency, power efficiency, computational complexity, bit error rate (BER), and peak-to-average power ratio (PAPR). This paper seeks to assess these approaches’ BER and PAPR performance across varying modulation orders. Regrettably, in VLC systems based on OFDM methodology, the superposition of multiple subcarriers results in a high PAPR. Therefore, this study aims to diminish the PAPR in VLC systems, enhancing system performance. We propose a non-distorting PAPR reduction technique, namely the Vandermonde-Like Matrix (VLM) precoding technique. The suggested technique is implemented across various O-OFDM approaches, including DCO-OFDM, ADO-OFDM, ACO-OFDM, FLIP-OFDM, ASCO-OFDM, and LACO-OFDM. Notably, this method does not affect the system’s data rate because it does not require the mandatory transmission of side information. Furthermore, this technique can decrease the PAPR without impacting the system’s BER performance. This study compares the proposed PAPR reduction technique against established methods documented in the literature to evaluate their efficacy and validity rigorously.

Dynamic thresholding logarithmic companding for PAPR reduction in MIMO-OFDM systems for 5G wireless communication

In order to advance 5G wireless communication technology, this paper presents a novel method for lowering the Peak-to-Average Power Ratio (PAPR) in Multiple-Input Multiple-Output Orthogonal Frequency-Division Multiplexing (MIMO-OFDM) systems. It is called the Dynamic Thresholding-based μ-law (DT-μ-law) logarithmic companding technique, and it greatly improves the performance of the system by effectively broadcasting data streams on a single frequency across multiple channels. This technique's ability lies in compressing the amplitude of the transmitting signal beyond a specific threshold value before the parallel-to-serial conversion block in the MIMO-OFDM system. It employs the direct insertion of an offset value into the guard bits, rather than using a step function for the amplitude reduction process, which can reduce additional system complexity and data loss during signal expansion at the receiver end. This technique is more adequately suited for dynamic data rate shifting and interference within a limited threshold value. The dynamic thresholding value (α) is determined by calculating the median and standard deviation of the μ-law companding. This ensures the effective compression of higher amplitude signals at the transmitter, using μ-law log companding. To streamline the decompanding process at the receiver, an offset is introduced, facilitating a smoother transition and reducing complexity. The results demonstrate that the proposed DT- μ-law companding technique significantly improves PAPR reduction while maintaining low Bit Error Rates (BER) and high average spectral power efficiency. This efficiency is optimal when the μ value is maintained within the range of 4–4.5. Furthermore, it was observed that an increase in the μ value corresponds to a decrease in both PAPR value and BER. Specifically, at a signal-to-noise ratio of 15.2 dB, the BER stabilizes at 10−1. Compared to existing methods like the Max-Min Decomp-SLM approach, this technique offers lower Signal-to-Noise Ratio (SNR) values, thereby enhancing spectral efficiency and maximizing data capacity.

Optimizing the Timeliness of Hybrid OFDMA-NOMA Sensor Networks with Stability Constraints

In this paper, we analyze the timeliness of a multi-user system in terms of the age of information (AoI) and the corresponding stability region in which the packet rates of users lead to finite queue lengths. Specifically, we consider a hybrid OFDMA-NOMA system where the users are partitioned into several groups. While users in each group share the same resource block using non-orthogonal multiple access (NOMA), different groups access the fading channel using orthogonal frequency division multiple access (OFDMA). For this system, we consider three decoding schemes at the service terminals: interfering decoding, which treats signals from other users as interference; serial interference cancellation, which removes signals from other users once they have been decoded; and the enhanced SIC strategy, where the receiver attempts to decode for another user if decoding for a previous user fails. We present the average AoI for each of the three decoding schemes in closed form. Under the constraint of the stable region, we find the minimum AoI of each decoding scheme efficiently. The numerical results show that by optionally choosing the decoding scheme and transmission rate, the hybrid OFDMA-NOMA outperforms conventional OFDMA in terms of both system timeliness and stability.

Hybrid Multiple Access Techniques Performance Analysis Of Dynamic Resource Allocation

The Non-Orthogonal Multiple Access (NOMA) and the Orthogonal Frequency Division Multiple Access (OFDMA) are promising techniques for next-generation wireless systems. Although much attention in the literature considered these techniques, an effective combination between such systems as hybrid multiple access (HMA) needs more attention. For this reason, this paper devotes to proposing two different scenarios of HMA using multi-user OFDM (MU-OFDM) and power domain (PD) NOMA for downlink transmission to overcome the limitations of both Orthogonal Multiple Access (OMA) and NOMA. Due to the randomness of a wireless channel, different user grouping strategies and dynamic power allocation (DPA) strategies are employed to satisfy users’ requirements. The proposed systems give high flexibility utilizing bitrate allocation and user fairness. System results show superior performance to traditional OMA and NOMA systems. The achieved variety of fairness is helpful for the diversity of applications which is a principal requirement for beyond-fifth-generation (B5G) networks. The next step in this analysis is to enhance the proposed systems’ spectral efficiency (SE) by introducing beamforming for massive Multiple-Input Multiple-Output (MIMO) systems. The bit error rate (BER) result of the proposed system achieves almost the same error floor with a benefit of approximately 10 dB signalto-noise ratio (SNR) when 90 resource blocks (RBs) are used.

Traffic-Aware Energy-Efficient Resource Allocation for RSMA Based UAV Communications

Traffic measurement will play an essential role in future networks to reveal the traffic requirements of the users, which will support network operations like resource allocation. In this paper, we study the traffic-aware resource allocation problem for downlink rate-splitting multiple access (RSMA) based unmanned aerial vehicle (UAV) communications. Specifically, with the help of traffic measurement, user requirements on achievable rate are known as prior knowledge to the UAV. Considering user requirements, we maximize the energy efficiency of the UAV by jointly optimizing the UAV deployment, beamforming, rate allocation, and subcarrier allocation. To overcome the non-convexity of the above problem, a joint optimization is developed to solve it iteratively. First, a heuristic approach is proposed to find the three-dimensional location of the UAV. Then, successive convex approximation approach is utilized to optimize RSMA parameters. Moreover, we formulate the subcarrier allocation problem as a many-to-one two-sided matching game, which is tackled by the swap matching algorithm. Numerical results suggest that the proposed subcarrier allocation scheme outperforms benchmark schemes, and RSMA based schemes perform close to that based on non-orthogonal multiple access, which all outperform orthogonal frequency division multiple access based scheme.

Enhancing PAPR reduction efficiency in MIMO-OFDM systems via selective mapping and metaheuristic algorithms

The relentless evolution of communication systems, driven by the demands of 5G and the impending 6G networks, necessitates heightened data rates and spectral efficiency. orthogonal frequency division multiplexing (OFDM), a form of multicarrier modulation employed in multi-input multi-output (MIMO) systems, stands as a pivotal technology. Yet, OFDM grapples with challenges, notably the peak-to-average power ratio (PAPR) issue. Selective mapping (SLM) has been a favored technique for mitigating PAPR in OFDM, albeit challenged by computational complexities in its pursuit of discovering optimal phase factors. This paper pioneers a transformative approach by integrating metaheuristic algorithms genetic algorithm (GA), particle swarm optimization (PSO), and the innovative fireworks algorithm (FWA) into SLM for PAPR reduction while minimizing computational complexity. Simulation results not only affirm the efficacy of SLM-based techniques but also spotlight the potential of metaheuristic algorithms in addressing PAPR challenges in modern communication systems. The study transcends single-antenna systems, extending to MIMO-OFDM systems based on WiMAX standards, validating the efficacy of these techniques in multi-antenna configurations. Crucially, the FWA, proposed for the first time in this paper, emerges as a robust candidate, striking an enviable balance between computational efficiency and performance, achieving a notable PAPR reduction with a favorable search number.

FPGA implementation of joint synchronization algorithm based on short training sequence

Synchronization processing is a vital component of the Orthogonal Frequency Division Multiplexing (OFDM) receiver, playing a decisive role in determining the performance of the OFDM receiver. Based on the repetitive structure of the Short Training Sequence (STS) in the IEEE 802.11 physical layer protocol data unit, this paper proposes and implements a joint synchronization algorithm to address issues related to data packet detection and coarse frequency offset correction during the synchronization process. Through software simulation and Field-Programmable Gate Array (FPGA) board-level validation, it is concluded that the algorithm ensures performance while, to some extent, conserving FPGA resources.

Low PAPR Filtered OFDM using Modified Selective Mapping

Wireless Communication has been witnessing generational change in the span of eight to ten years since it came in existence. From generation 1G to 3G and from 4G to 5G the telecommunication world has seen significant improvements along with enhanced performance with every passing year. The objective of research is to comprehensive study of Filtered Orthogonal Frequency Division Multiplexing (F-OFDM) as a promising waveform option for fifth-generation (5G) communications, distinguished by its capacity to suppress out-of-band emission (OOBE) and accommodate asynchronous transmission. Though there are many advantages but the challenge of a high peak-to-average power ratio (PAPR) among new waveform candidates can’t be ignored. To address this problem, the selective mapping technique is used as a key method to alleviate the elevated PAPR trend within multicarrier systems. This research put emphasis on applying selective mapping technique to overcome the high PAPR values in an F-OFDM system with different windowed filters such as kaiser, Nuttles blackman harris and Root raised cousine followed by a proposed Modified Selective mapping technique for further improved performance in terms of PAPR for the Filtered OFDM for different window functions in comparison with the conventional OFDM system, SLM F-OFDM system. Furthermore, PAPR performance is evaluated for all the three-system using the different window techniques analyzed for both systems, both with and without the SLM technique and Modified SLM technique to mitigate the PAPR disadvantage of the Filtered OFDM system. Simulation results underscore that F-OFDM enhanced by SLM and MSLM outperforms OFDM across PAPR.

Comparative analysis of coding schemes for effective wireless communication

Communication systems have recently focused on sending information efficiently and effectively from one sending point to another across a communication channel in the shortest amount of time. The main objective of this work is to compare the high-range coding scheme types, such as low density parity check (LDPC), turbo, and convolution, to see which works better and is more efficient. to establish a coding system with quadrature amplitude modulation (QAM) modulation and an additive white gaussian noise (AWGN) noisy channel to find which is more reliable and resilient for encoding and decoding. Because of this, digital media has to be sent over wireless channels and through satellites, requiring a connected network all the time, which has become a major concern over time. Furthermore, the high amount of data and efficiency are the focus points. After running the simulation, it was found that 64 QAM with a rate of 0.455 and an efficiency of 2.731 has a bit error rate (BER) of 0.001 and a 7.08 dB energy per bit Eb/No, and the 256 QAM simulation revealed that it has a BER of 0.001 and 11.88 dB Eb/No with a rate of 0.736 and an efficiency of 5.891. Over the AWGN channel noise, the simulation built a standard orthogonal frequency division multiplexing (OFDM) system, which used MATLAB.

Non pilot data-aided carrier and sampling frequency offsets estimation in fast time-varying channel

This paper considers the non pilot data-aided estimation of the carrier frequency offset (CFO) and sample frequency offset (SFO) of orthogonal frequency division multiplexing (OFDM) signals in fast time-varying channel. The main obstacle is the time-variant channel response, which deteriorates the estimation validity. A practical approach to mitigate this impact is to reduce the time consumption of one-shot estimation. In this way, we propose a method to reduce the time consumption to within one OFDM symbol duration. The maximum likelihood (ML) estimator is derived based on the observations of frequency domain constellations output of two FFTs on one symbol; its closed-form approximation is then derived to reduce the calculation burden. Remarkably, our method does not require any training symbol or pilot tone embedded in the signal spectrum, therefore achieves the highest spectral efficiency. Theoretical analysis and simulation results are employed to assess the performance of proposed method in comparison with existing alternatives.

A Novel 4 × 1 MISO-VLC System with FBMC-OQAM Downlink Signals

A novel visible-light communication (VLC) system with 4 × 1 multi-input–single-output (MISO) channels is designed. In the system, the filter bank multicarrier (FBMC) and offset quadrature amplitude modulation (OQAM) techniques are used to generate downlink signals. The principles and implementation methods are proposed and analyzed, and the light intensity and received light power distribution of four LED emitters are discussed. The results demonstrate that it not only satisfies the requirements of indoor information access but also provides daily lighting. The used FBMC-OQAM signals exhibit better reception performance than orthogonal frequency division multiplexing (OFDM) signals. The system used has a lower bit error rate (BER) and larger access bandwidth compared to a 1 × 1 single-input–single-output (SISO) system. It has the potential for application advantages in future indoor VLC system applications.