Orthogonal Frequency Division Multiplexing Systems Research Articles

W-band photonics-aided OFDM system integrating sensing and communication with phase noise suppression scheme

Photonic-aided technology offers many advantages in millimeter-wave (MMW) communication and sensing, such as low equipment cost and wide bandwidth. The combination of photonics-aided systems with orthogonal frequency division multiplexing (OFDM) waveforms enables high-performance integration of sensing and communication. In this paper, we propose and experimentally demonstrate a W-band photonic-aided OFDM system integrating sensing and communication (ISAC). To address the destruction of signal coherence by phase noise of the system, this paper proposes an OFDM sensing scheme combined with frequency-domain filtering to reduce the sidelobe interference caused by phase noise. Combined with offline digital signal processing algorithms, the system achieves high-precision ranging-Doppler imaging with a ranging resolution of 0.96 cm at a detection distance of 2 m. In terms of communication, after 10 m of wireless transmission, the net rate reaches 47.06 Gbit/s. The proposed system makes full use of the system's resources by using OFDM signals as both the sensing and communication signals. This may be beneficial for some potential applications of 6G in the future.

Parametric channel estimation for RIS-assisted mmWave MIMO-OFDM systems with low pilot overhead

We consider the channel estimation problem in a millimeter-wave (mmWave) multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system aided by a passive reconfigurable intelligent surface (RIS). Initially, leveraging the inherent sparsity of mmWave channels, we decouple the channel estimation into the recovery of multipath parameters, including spatial frequencies of angles, delays, and complex gains. Subsequently, we employ two training schemes: the first involves a full row rank constrained RIS phase shift pattern, and the second incorporates a Kronecker structure constrained RIS phase shift pattern. These schemes reform channel estimation into estimating parameters from two fifth-order tensor signals, which admit constrained Canonical Polyadic decomposition. Moreover, both tensor signals share Vandermonde-constrained factor matrices, enabling algebraic algorithms for tensor decomposition problems and recovering channel multipath parameters. Theoretical analyses show that the first training scheme has a lower signal processing complexity for channel estimation, while the second attains a higher estimation accuracy. Also, we prove that our proposed two schemes have the same minimum pilot overhead, which is as low as proportional to the product of the number of paths in the two MIMO channels (transmitter-RIS and RIS-receiver). Numerical results validate the effectiveness of our proposed methods.

Cooperative transmission of UAV swarm using orthogonal time frequency space modulation

Unmanned aerial vehicles (UAVs) emerge as versatile aerial nodes capable of dynamically filling coverage gaps and enabling mission-critical communication based on their mobile nature. UAV swarms, characterized by the coordinated operation of multiple drones, are employed for a wide range of applications such as surveillance, environmental monitoring, precision farming, and autonomous delivery. While individual UAVs suffer from limited power, group transmissions of UAV swarms can enhance the data rate, reliability, and energy efficiency. However, their mobility may cause severe Doppler spread. The existing orthogonal frequency division multiplexing (OFDM) system exhibits limitations such as susceptibility to the Doppler effect in high-speed mobile environments. To address this issue, orthogonal time frequency space (OTFS)-aided cooperative transmission (CT) for UAV swarms is considered, which can surmount the aforementioned limitations. The results show the BER improvement of the order of 103 at the SNR value of 10 dB when OTFS modulation is utilized and even better at the higher SNR values. Furthermore, the analytical framework of OTFS-based CT is presented by identifying the key design considerations on the subcarrier spacing, the number of symbols, and the number of subcarriers, which are subject to the maximum speed of the UAV and the cluster size of the UAV swarm. These results provide a significant platform for advancing research in the field of UAV-based CT, especially with the Doppler-resilient OTFS modulation.

Time-Varying Channel Estimation Based on Distributed Compressed Sensing for OFDM Systems.

For orthogonal frequency division multiplexing (OFDM) systems in high-mobility scenarios, the estimation of time-varying multipath channels not only has a large error, which affects system performance, but also requires plenty of pilots, resulting in low spectral efficiency. To address these issues, we propose a time-varying multipath channel estimation method based on distributed compressed sensing and a multi-symbol complex exponential basis expansion model (MS-CE-BEM) by exploiting the temporal correlation and the joint delay sparsity of wideband wireless channels within the duration of multiple OFDM symbols. Furthermore, in the proposed method, a sparse pilot pattern with the self-cancellation of pilot intercarrier interference (ICI) is adopted to reduce the input parameter error of the MS-CE-BEM, and a symmetrical extension technique is introduced to reduce the modeling error. Simulation results show that, compared with existing methods, this proposed method has superior performances in channel estimation and spectrum utilization for sparse time-varying channels.

Performance enhancement with geometrically shaped 4/8D-SP-50QAM for DDO-OFDM system

We design the 4-dimensional set-partitioning 50-ary quadrature amplitude modulation (4D-SP-50QAM) and 8D-SP-50QAM with 7 bit/symbol in direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems. Quadrant multiplexing (QM) and orthant symmetry (OS) are respectively used to reduce the number of constellation points and the complexity of constellation mapping, while improving system bandwidth utilization. The proposed 8D-SP-50QAM scheme outperforms 4D-SP-50QAM, 4D-OS-64QAM and 4D 128-ary polarization-ring-switching (4D-128PRS) in terms of generalized mutual information (GMI) and bit error rate (BER) performance at various fiber length. In addition, the GMI gain increases gradually with the increase of fiber length, proving that this scheme can effectively improve system capacity and nonlinear tolerance.

A comparative study of deep learning and iterative algorithms for joint channel estimation and signal detection in OFDM systems

Joint channel estimation and signal detection (JCESD) is crucial in orthogonal frequency division multiplexing (OFDM) systems, but traditional algorithms perform poorly in low signal-to-noise ratio (SNR) scenarios. Deep learning (DL) methods have been investigated, but concerns regarding computational expense and lack of validation in low-SNR settings remain. Hence, the development of a robust and low-complexity model that can deliver excellent performance across a wide range of SNRs is highly desirable. In this paper, we aim to establish a benchmark where traditional algorithms and DL methods are validated on different channel models, Doppler, and SNR settings, particularly focusing on the semi-blind setting. In particular, we propose a new DL model where the backbone network is formed by unrolling the iterative algorithm, and the hyperparameters are estimated by hypernetworks. Additionally, we adapt a lightweight DenseNet to the task of JCESD for comparison. We evaluate different methods in three aspects: generalization in terms of bit error rate (BER), robustness, and complexity. Our results indicate that DL approaches outperform traditional algorithms in the challenging low-SNR setting, while the iterative algorithm performs better in high-SNR settings. Furthermore, the iterative algorithm is more robust in the presence of carrier frequency offset, whereas DL methods excel when signals are corrupted by asymmetric Gaussian noise.

Sub-System Architecture for millimeter-wave massive MIMO systems

In this paper, we study the hybrid beamforming design for millimeter-wave (mmWave) massive multiple-input multiple-output (mMIMO) systems. The designing of hybrid beamforming for orthogonal frequency-division multiplexing (OFDM) systems is tasking since its analog beamforming is shared among all subcarriers. We adopt a two-step technique for designing the analog and digital beamforming separately in order to maximize the average achievable energy and spectral efficiency of frequency-selective mmWave mMIMO-OFDM systems. Firstly, the analog beamforming design is based on the viewpoint of sub-systems (SS) and the goal is to optimize the array gain and radio frequency chains. Secondly, the digital beamforming design is carried out by using the regularized channel diagonalization (RCD) and block diagonalization (BD) solutions. On the other hand, the BD solution is modified for single-user. Thus, we propose the use of SS-RCD for multi-user and SS-BD for single-user hybrid beamforming designs. The solutions provide interference suppression but differ in low-SNR performance when communicating to many mobile users via data streams. Simulation results present that our hybrid beamforming design outperforms several other designs.

Doppler spread analysis for suppressing channel time variation in high‐mobility massive MIMO V2V communications

AbstractHere, fast time‐varying channels of high‐mobility vehicle‐to‐vehicle communications for massive multiple‐input multiple‐output orthogonal frequency division multiplexing systems are considered. Large‐scale uniform linear arrays are configured at the transmitter and receiver to separate multiple angle domain Doppler frequency offsets based on transmit and receive beamforming with high spatial resolution. Then, each beamforming branch comprises only one dominant Doppler frequency offset. Next, the conventional channel estimation method is performed for each beamforming branch, and carry out maximum‐ratio‐combining for data detection. Power spectrum density and Doppler spread of the equivalent link between the transmitter and receiver are derived and regarded as the criterion for assessing the residual channel time variation caused by limited antennas in practice. Interestingly, a scaling law between the asymptotic Doppler spread and the number of transceiver antennas shows that asymptotic Doppler spread is proportional to the maximum Doppler frequency offset and decreases at the rate of , where and are the number of transmit and receive antennas, respectively. Simulation results confirm the validity of the proposed Doppler suppression framework in high‐mobility vehicle‐to‐vehicle communications.

Exploring and Analyzing a Hybrid PAPR Reduction Method for OFDM Optimization

Orthogonal Frequency Division Multiplexing (OFDM) is a effective modulation technique widely used in modern communication systems, including 5G and wireless networks because of its high spectral efficiency and robustness towards multipath fading. However, OFDM signals are characterized by a high Peak-to-Average Power Ratio (PAPR), which can severely impact the power efficiency and operational cost of these systems. This research investigates and analyse effectiveness of two conventional PAPR reduction methods that is Selective Mapping (SLM), and Partial Transmit Sequence (PTS) with incorporating their approach of PAPR reduction to develop a hybrid variant: SLM-PTS. This study utilized MATLAB simulations to implement and test each PAPR reduction technique on a standard OFDM system model. Parameters such as the number of subcarriers, oversampling factor, and modulation types were systematically varied to analyze the impact on PAPR, BER, and computational complexity. The effectiveness of each technique was measured using the Complementary Cumulative Distribution Function (CCDF) of PAPR values and BER performance under different channel conditions. Key findings reveal that hybrid techniques, particularly SLM & PTS, offer significant improvements in PAPR reduction compared to traditional methods alone, without a corresponding increase in BER or computational overhead. The research underscores the potential of hybrid PAPR reduction techniques to significantly enhance the efficiency and reliability of OFDM systems. These findings have important implications for the design and optimization of next-generation wireless communication systems, suggesting that hybrid approaches can provide a balanced solution to the longstanding issue of PAPR in OFDM transmissions. This study contributes valuable insights into the practical application of combined PAPR reduction strategies, offering a pathway toward more power-efficient and robust OFDM technologies. Keywords : OFDM, PAPR, CCDF, SLM and PTS

Dynamic thresholding logarithmic companding for PAPR reduction in MIMO-OFDM systems for 5G wireless communication

In order to advance 5G wireless communication technology, this paper presents a novel method for lowering the Peak-to-Average Power Ratio (PAPR) in Multiple-Input Multiple-Output Orthogonal Frequency-Division Multiplexing (MIMO-OFDM) systems. It is called the Dynamic Thresholding-based μ-law (DT-μ-law) logarithmic companding technique, and it greatly improves the performance of the system by effectively broadcasting data streams on a single frequency across multiple channels. This technique's ability lies in compressing the amplitude of the transmitting signal beyond a specific threshold value before the parallel-to-serial conversion block in the MIMO-OFDM system. It employs the direct insertion of an offset value into the guard bits, rather than using a step function for the amplitude reduction process, which can reduce additional system complexity and data loss during signal expansion at the receiver end. This technique is more adequately suited for dynamic data rate shifting and interference within a limited threshold value. The dynamic thresholding value (α) is determined by calculating the median and standard deviation of the μ-law companding. This ensures the effective compression of higher amplitude signals at the transmitter, using μ-law log companding. To streamline the decompanding process at the receiver, an offset is introduced, facilitating a smoother transition and reducing complexity. The results demonstrate that the proposed DT- μ-law companding technique significantly improves PAPR reduction while maintaining low Bit Error Rates (BER) and high average spectral power efficiency. This efficiency is optimal when the μ value is maintained within the range of 4–4.5. Furthermore, it was observed that an increase in the μ value corresponds to a decrease in both PAPR value and BER. Specifically, at a signal-to-noise ratio of 15.2 dB, the BER stabilizes at 10−1. Compared to existing methods like the Max-Min Decomp-SLM approach, this technique offers lower Signal-to-Noise Ratio (SNR) values, thereby enhancing spectral efficiency and maximizing data capacity.

Comparative analysis of coding schemes for effective wireless communication

Communication systems have recently focused on sending information efficiently and effectively from one sending point to another across a communication channel in the shortest amount of time. The main objective of this work is to compare the high-range coding scheme types, such as low density parity check (LDPC), turbo, and convolution, to see which works better and is more efficient. to establish a coding system with quadrature amplitude modulation (QAM) modulation and an additive white gaussian noise (AWGN) noisy channel to find which is more reliable and resilient for encoding and decoding. Because of this, digital media has to be sent over wireless channels and through satellites, requiring a connected network all the time, which has become a major concern over time. Furthermore, the high amount of data and efficiency are the focus points. After running the simulation, it was found that 64 QAM with a rate of 0.455 and an efficiency of 2.731 has a bit error rate (BER) of 0.001 and a 7.08 dB energy per bit Eb/No, and the 256 QAM simulation revealed that it has a BER of 0.001 and 11.88 dB Eb/No with a rate of 0.736 and an efficiency of 5.891. Over the AWGN channel noise, the simulation built a standard orthogonal frequency division multiplexing (OFDM) system, which used MATLAB.

Low-Complexity User Scheduling Framework for mmWave Hybrid Beam-forming OFDM System under Non-Ideal CSI

Introduction: User scheduling in millimeter-wave (mmWave) multi-user hybrid beam-forming Orthogonal Frequency Division Multiplexing (OFDM) systems involves the joint optimization of resource block group (RBG) allocation, beam pairing, and user selection. However, choosing the optimal scheduled User Equipment (UE), allocated RBGs, and communicating beams in practical mmWave hybrid beam-forming systems with non-ideal Channel State Information (CSI) remains challenging. Method: In this paper, we propose a low-complexity user scheduling framework. On one hand, two user classification methods are proposed under non-ideal CSI, assisted by beam search and RBG allocation respectively. On the other hand, in order to ensure both the throughput and fairness performance, a novel user selection scheme, called weighted user selection based on feedback threshold (WUSFT) scheme is proposed, and approximate closed-form expression of fairness index for both full feedback and feedback based on threshold are derived. Our proposed methods consist of three steps. First, RBGs are allocated based on the maximum received signal power (MRSP) of each user on each RBG, utilizing quasi-omnidirectional beams. In the second step, the communicating beams are further searched to achieve the MRSP with the allocated RBG. Result: Finally, the allocated RBG, or the determined beam information obtained through the beam search, is used to represent the correlation of user channels and classify the UEs into groups. Only UEs whose reported factor is not less than the feedback threshold will report received information. This simplifies the operation of user scheduling. Moreover, simulation results demonstrate that our proposed schemes can achieve more than 92.3% of the sum rate performance of exhaustive search methods while maintaining relatively low complexity. Conclusion: In addition, the user feedback overhead (FO) reduces obviously, especially with large UE number.

Channel Estimation for Underwater Acoustic Communications in Impulsive Noise Environments: A Sparse, Robust, and Efficient Alternating Direction Method of Multipliers-Based Approach

Channel estimation in Underwater Acoustic Communication (UAC) faces significant challenges due to the non-Gaussian, impulsive noise in ocean environments and the inherent high dimensionality of the estimation task. This paper introduces a robust channel estimation algorithm by solving an l1−l1 optimization problem via the Alternating Direction Method of Multipliers (ADMM), effectively exploiting channel sparsity and addressing impulsive noise outliers. A non-monotone backtracking line search strategy is also developed to improve the convergence behavior. The proposed algorithm is low in complexity and has robust performance. Simulation results show that it exhibits a small performance deterioration of less than 1 dB for Channel Impulse Response (CIR) estimation in impulsive noise environments, nearly matching its performance under Additive White Gaussian Noise (AWGN) conditions. For Delay-Doppler (DD) doubly spread channel estimation, it maintains Bit Error Rate (BER) performance comparable to using ground truth channel information in both AWGN and impulsive noise environments. At-sea experimental validations for channel estimation in Orthogonal Frequency Division Multiplexing (OFDM) systems further underscore the fast convergence speed and high estimation accuracy of the proposed method.

Filtered Ofdm System Model for Papr Reduction in the Growth Of 5g

A proposed waveform for fifth generation (5G) communications is the filtered orthogonal frequency division multiplexing (F-OFDM) system. Filtering-based waveform frameworks distinguish themselves by suppressing out-of-band emission and asynchronous transmission. Meanwhile, the high Peak-To-Average Power Ratio (PAPR) remains a barrier to new waveform possibilities. Partials transmit sequence (PTS) is a successful strategy for reducing high PAPR in multicarrier networks. This work presents a multicarrier in OFDM and UFMC based on the Filter Bank Multicarrier (FBMC) waveform for communication systems. Furthermore, FBMC waveforms have limited orthogonality between subcarriers, which can mitigate Doppler and multipath effects. This FBMC approach uses the cosine law to filter the traffic signal, and the Welch algorithm is offered for segmentation, which lowers noise in estimated power spectra. As a result, a hybrid Selective Mapping (SLM) with Cuckoo Search and Ant Lion Optimization (CS-ALO) algorithms is suggested using the FBMC framework to reduce PAPR in the OFDM system. The proposed work is implemented, and detailed experimental research is carried out to show the increased performance in 5G networks. Based on a fair comparison, the F-OFDM scheme outperforms previous approaches in terms of BER and multicarrier system capacity. Simulation results show that the proposed waveform design and processing method outperform standard OFDM and F-OFDM methods in PAPR reduction and communication integrated systems.

Attractor Merging and Amplitude Control of Hyperchaos in a Self-Reproducing Memristive Map

Memristor-type feedback provides a unique passage for chaos produced with easy control. In this work, a novel memristive map with amplitude control and coexisting hyperchaotic attractors is designed, in which two nonbifurcation parameters are extracted for partial amplitude control crossing the origin and total amplitude control. Attractor splitting and attractor merging are captured, which lead to five regimes of attractor self-reproducing. In this case, double-cavity attractors extend in the direction of 0[Formula: see text], 45[Formula: see text], 90[Formula: see text] in negative [Formula: see text]-axis, 90[Formula: see text] in positive [Formula: see text]-axis, 135[Formula: see text] in [Formula: see text]-axis forming a specific wall of self-reproduction. Furthermore, the FPGA-based hardware implementation is carried out showing consistent results with numerical simulation. Finally, a high-security chaotic encryption scheme is proposed for the orthogonal frequency division multiplexing transmission system, where the power division multiplexing technique and two-dimensional region joint encryption are effectively utilized. The security of the transmitted information is improved by the various coexisting attractors and nonbifurcation amplitude controllers.

Low complexity hybrid beamforming for downlink multi-user MIMO OFDM systems

Hybrid beamforming is critical for massive multiple input multiple output (MIMO) to achieve high spectral efficiency at reduced hardware cost. Existing hybrid beamforming schemes either design the analog beamforming and digital beamforming separately, or jointly optimize them through alternating optimization. Such strategies incur non-negligible performance degradation or huge computational complexity in optimization, which is especially evident with the partially connected architecture. In this work, we consider a general downlink multi-user MIMO orthogonal frequency division multiplexing (OFDM) system with the hybrid beamforming architecture, where finite-resolution phase shifters are adopted. We propose an efficient beamforming strategy on the sum rate maximization criterion. Rather than eliminating the interference entirely by digital beamforming, we optimize the analog beamforming by considering the interference at the same time. We consider a fixed digital beamforming structure to reduce the overall complexity. Given the fact of finite-resolution phase shifters, the analog beamforming is optimized over discrete phase values. Compared to existing hybrid beamforming designs, the proposed algorithm achieves much improved performance. By applying the average channel covariance to the analog beamforming design, the computational complexity of the proposed algorithm is further reduced. Meanwhile, the proposed algorithm is applicable to both fully and partially connected architectures.

Realization of 4 × 200 Gbps 4-QAM OFDM-OWC System Using Higher Order OAM Modes for HAP-to-Satellites Scenario

Recently, there has been an increase in interest in using optical wireless communication (OWC) links on high-altitude platforms (HAPs) for satellite applications. We implement an orbital angular momentum (OAM) multiplexed orthogonal frequency division multiplexing (OFDM) system using an OWC link. A space-to-air scenario is considered in which transmission pointing errors, geometric loss, turbulence, and additional link losses are taken into account to extend the transmission range, system capacity, and throughput. At 200 Gbps per channel data rate, four different OAM modes are implemented with higher order Laguerre–Gaussian (LG) modes of [0,0], [0,13], [0,40], and [0,80]. An aggregate 800 Gbps data rate can deliver a maximum OWC range of 3300–5000 km for all channels. The maximum received power over the 1000 km range is −19.34 to −32.59 dBm with an additional gain of 0–2.5 dB. It is also possible to obtain a better performance over large distances of 500–3500 km with an error vector magnitude of 2.98–17.5%. Furthermore, a high gain of −40.80 dB, a signal-to-noise ratio (SNR) of 55.21 dB, and an optical SNR of 67.25 dB can be achieved for varied transmitter pointing errors of 0.1 rad. As compared to other literature, this system exhibits a superior performance.

Analysis of phase noise for DFT-spread OFDM systems in coherent optical communication

Previous studies have revealed the similarity between phase noise in the symbol domain of discrete Fourier transform spread (DFT-Spread) coherent orthogonal frequency division multiplexing (CO-OFDM) systems and that in the time domain. This paper further details this characteristic through both formulas and simulation results, while also analyzing and summarizing its formation conditions and influencing factors. Based on this, a phase noise compensation (PNC) scheme based on DFT-Spread OFDM is proposed for high-order quadrature amplitude modulation (QAM) transmission with large fast Fourier transform (FFT) sizes. The proposed scheme effectively suppresses inter-carrier interference (ICI) introduced by phase noise in OFDM systems, as verified through simulations of dual-polarization (DP) 64-QAM CO-OFDM transmission over 80 km single-mode fiber (SMF). This work suggests that proposed PNC scheme enhance the tolerance for laser linewidth in OFDM systems, and may offer a possible solution for short distance high-baud-rate high-order QAM coherent transmission.

A Survey of PAPR Techniques Based on Machine Learning.

Orthogonal Frequency Division Multiplexing (OFDM) is the modulation technology used in Fourth Generation (4G) and Fifth Generation (5G) wireless communication systems, and it will likely be essential to Sixth Generation (6G) wireless communication systems. However, OFDM introduces a high Peak to Average Power Ratio (PAPR) in the time domain due to constructive interference among multiple subcarriers, increasing the complexity and cost of the amplifiers and, consequently, the cost and complexity of 6G networks. Therefore, the development of new solutions to reduce the PAPR in OFDM systems is crucial to 6G networks. The application of Machine Learning (ML) has emerged as a promising avenue for tackling PAPR issues. Along this line, this paper presents a comprehensive review of PAPR optimization techniques with a focus on ML approaches. From this survey, it becomes clear that ML solutions offer customized optimization, effective search space navigation, and real-time adaptability. In light of the demands of evolving 6G networks, integration of ML is a necessity to propel advancements and meet increasing prerequisites. This integration not only presents possibilities for PAPR reduction but also calls for continued exploration to harness its potential and ensure efficient and reliable communication within 6G networks.

MIMO–OFDM System Analysis and Achievement

Multi-Input–Multi-Output (MIMO) technology has already become crucial in modern communication study, but the needs of anti-interference capability and spectral efficiency are always growing, which poses a significant challenge in future development. In the paper, by analyzing and summarizing the respective characteristics and problems of MIMO system and Orthogonal Frequency Division Multiplexing (OFDM), we investigate the knowledge of MIMO–OFDM system. The theoretical analysis proves that this system can effectively solve the shortcomings of MIMO system and improve the performance of communication system. In addition, in the experimental simulation part, we also evaluate the system performance mainly by analyzing the Bit Error Rate (BER) metrics, while other methods such as channel estimation algorithms and synchronization techniques are also considered.