Collagen Fiber Orientation Research Articles

Decellularized Bovine Pericardial Patch Loaded With Mesenchymal Stromal Cells Enhance the Mechanical Strength and Biological Healing of Large-to-Massive Rotator Cuff Tear in a Rat Model

The purpose of this study was to determine whether the addition of decellularized bovine pericardial patch loaded with mesenchymal stromal cells enhanced bone-to-tendon healing and improved the biomechanical strength of large-to-massive rotator cuff tears in a small animal model. Adipose-derived mesenchymal stromal cells (MSCs) from rat inguinal fat were isolated, cultured, and loaded onto decellularized bovine pericardium patches. To simulate large-to-massive tears, rats were managed with free cage activity for 6 weeks after tear creation. A total of 18 rats were randomly allocated to repair-only (control), repair with pericardial patch augmentation (patch), or repair with MSC loaded pericardial patch augmentation (patch-MSC). Each group had 6 rats (one shoulder of each rat was used for histological evaluation and another for biomechanical evaluation). MSCs seeded on the pericardial patches were traced on four shoulders from 2 other rats at 4 weeks after surgery. Histological evaluation for bone-to-tendon healing and biomechanical testing was carried out at 8 weeks after repair. MSCs tagged with a green fluorescent protein were observed in the repair site 4 weeks after the repair. One shoulder each in the control and patch groups showed complete discontinuity between the bone and tendon. One shoulder in the control group showed attenuation with only a tenuous connection. Fibrocartilage and tidemark formation at the bone-to-tendon interface (P= .002) and collagen fiber density (P= .040) and orientation (P= .003) were better in the patch-MSC group than in the control or patch group. Load-to-failure in the patch-MSC and patch groups was higher than that in the control group (P= .001 and .009, respectively). Decellularized bovine pericardial patches loaded with adipose-derived and cultured mesenchymal stromal cells enhanced healing in terms of both histology and mechanical strength at 8 weeks following rotator cuff repair in a rat model. Large-to-massive rotator tears need a strategy to prevent retear and enhance healing. The addition of decellularized bovine pericardial patch loaded with MSCs can enhance bone-to-tendon healing and improve biomechanical healing of large-to-massive rotator cuff tears following repair.

Long-Term Controlled Growth Factor Release Using Layer-by-Layer Assembly for the Development of In Vivo Tissue-Engineered Blood Vessels.

The development of a well-designed tissue-engineered blood vessel (TEBV) still remains a challenge. In recent years, approaches in which the host response to implanted biomaterials is used to generate vascular constructs within the patient’s body have gained increasing interest. The delivery of growth factors to these in situ-engineered vascular grafts might enhance myofibroblast recruitment and the secretion of essential extracellular matrix proteins, thereby optimizing their functional properties. Layer-by-layer (LbL) coating has emerged as an innovative technology for the controlled delivery of growth factors in tissue engineering applications. In this study, we combined the use of surface-etched polymeric rods with LbL coatings to control the delivery of TGF-β1, PDGF-BB, and IGF-1 and steer the foreign body response toward the formation of a functional vascular graft. Results showed that the regenerated tissue is composed of elastin, glycosaminoglycans, and circumferentially oriented collagen fibers, without calcification or systemic spill of the released growth factors. Functional controlled delivery was observed, whereas myofibroblast-rich tissue capsules were formed with enhanced collagen and elastin syntheses using TGF-β1 and TGF-β1/PDGF-BB releasing rods, when compared to control rods that were solely surface-engineered by chloroform etching. By combining our optimized LbL method and surface-engineered rods in an in vivo bioreactor approach, we could regulate the fate and ECM composition of in situ-engineered vascular grafts to create a successful in vivo vascular tissue-engineered replacement.

Rapid fabrication of tendon-like collagen gel via simultaneous fibre alignment and intermolecular cross-linking under mechanical loading

Artificial tissue replacement is a promising strategy for better healing outcomes for tendon and ligament injuries, due to the very limited self-regeneration capacity of these tissues in mammals, including humans. Because clinically available synthetic and biological scaffolds for tendon repair have performed more poorly than autografts, both biological and mechanical compatibility need to be improved. Here we propose a rapid fabrication method for tendon-like structure from collagen hydrogel, simultaneously achieving collagen fibre alignment and intermolecular cross-linking. Collagen gel, 24 h after polymerization, was subjected to mechanical loading in the presence of the chemical cross-linker, genipin, for 24 or 48 h. Mechanical loading during gel incubation oriented collagen fibres in the loading direction and made chemical cross-linking highly effective in a loading magnitude-dependent manner. Gel incubated with 4 g loading in the presence of genipin for 48 h possessed tensile strength of 4 MPa and tangent modulus of 60 MPa, respectively, which could fulfill the minimum biomechanical requirement for artificial tendon. Although mechanical properties of gels fabricated using the present method can be improved by using a larger amount of collagen in the starting material and through optimisation of mechanical loading and cross-linking, the method is a simple and effective for producing highly aligned collagen fibrils with excellent mechanical properties.

Label-free multimodal nonlinear optical imaging of needle biopsy cores for intraoperative cancer diagnosis.

.Significance: Needle biopsy (NB) procedures are important for the initial diagnosis of many types of cancer. However, the possibility of NB specimens being unable to provide diagnostic information, (i.e., non-diagnostic sampling) and the time-consuming histological evaluation process can cause delays in diagnoses that affect patient care.Aim: We aim to demonstrate the advantages of this label-free multimodal nonlinear optical imaging (NLOI) technique as a non-destructive point-of-procedure evaluation method for NB tissue cores, for the visualization and characterization of the tissue microenvironment.Approach: A portable, label-free, multimodal NLOI system combined second-harmonic generation (SHG) and third-harmonic generation and two- and three-photon autofluorescence (2PF, 3PF) microscopy. It was used for intraoperative imaging of fresh NB tissue cores acquired during canine cancer surgeries, which involved liver, lung, and mammary tumors as well as soft-tissue sarcoma; in total, eight canine patients were recruited. An added tissue culture chamber enabled the use of this NLOI system for longitudinal imaging of fresh NB tissue cores taken from an induced rat mammary tumor and healthy mouse livers.Results: The intraoperative NLOI system was used to assess fresh canine NB specimens during veterinary cancer surgeries. Histology-like morphological features were visualized by the combination of four NLOI modalities at the point-of-procedure. The NLOI results provided quantitative information on the tissue microenvironment such as the collagen fiber orientation using Fourier-domain SHG analysis and metabolic profiling by optical redox ratio (ORR) defined by 2PF/(2PF + 3PF). The analyses showed that the canine mammary tumor had more randomly oriented collagen fibers compared to the tumor margin, and hepatocarcinoma had a wider distribution of ORR with a lower mean value compared to the liver fibrosis and the normal-appearing liver. Moreover, the loss of metabolic information during tissue degradation of fresh murine NB specimens was shown by overall intensity decreases in all channels and an increase of mean ORR from 0.94 (standard deviation 0.099) to 0.97 (standard deviation 0.077) during 1-h longitudinal imaging of a rat mammary tumor NB specimen. The tissue response to staurosporine (STS), an apoptotic inducer, from fresh murine liver NB specimens was also observed. The mean ORR decreased from 0.86 to 0.74 in the first 40 min and then increased to 0.8 during the rest of the hour of imaging, compared to the imaging results without the addition of STS, which showed a continuous increase of ORR from 0.72 to 0.75.Conclusions: A label-free, multimodal NLOI platform reveals microstructural and metabolic information of the fresh NB cores during intraoperative cancer imaging. This system has been demonstrated on animal models to show its potential to provide a more comprehensive histological assessment and a better understanding of the unperturbed tumor microenvironment. Considering tissue degradation, or loss of viability upon fixation, this intraoperative NLOI system has the advantage of immediate assessment of freshly excised tissue specimens at the point of procedure.

Local Administration of Metformin Improves Bone Microarchitecture and Biomechanical Properties During Ruptured Canine Achilles Tendon–Calcaneus Interface Healing

Background: Tendon-bone interface (TBI) healing is a clinical dilemma that is closely relevant to new bone formation and remodeling at the repair site. Previous studies showed that metformin is an osteogenic inducer for stem cells in vitro and capable of stimulating bone regeneration in vivo. Hypothesis: Metformin would be effective for promoting TBI healing by enhancing new bone formation and remodeling. Study Design: Controlled laboratory study. Methods: Canine bone marrow stem cells (BMSCs) were cultured with various concentrations of metformin (0, 10, 50, 100, 200 μM). The effect of metformin on the osteogenic differentiation of canine BMSCs was evaluated via alizarin red staining and osteogenic gene expression. Eighteen mature beagles were included in a bilateral Achilles tendon–calcaneus (ATC) interface injury model. The right interface was reattached via surgical repair only, while the left was surgically reattached after implanting a fibrin glue containing metformin. At postoperative week 4 or 8, the healing quality of the wounded ATC interfaces was evaluated. Results: In vitro experiments determined that metformin was an osteogenic inducer for canine BMSCs. In vivo experiments showed that the metformin-treated ATC interfaces were repaired with significantly greater failure load and stiffness than was the no-metformin control site (P < .05 for all). Micro–computed tomography analysis showed that the metformin-treated specimens presented significantly higher bone volume/total volume and trabecular thickness than did the no-metformin control specimens (P < .05 for all), as confirmed via hematoxylin and eosin staining. Immunohistochemical staining showed that significantly more osteocalcin-positive cells were located at the newly formed bones treated with metformin than at the no-metformin control site at week 4 (P < .05). Masson trichrome staining showed that significantly more oriented collagen fibers anchored into the newly formed bone of the metformin-treated site than the no-metformin control site (P < .05). Conclusion: Metformin induced the osteogenesis of canine BMSCs in vitro, and local administration of metformin provided an improvement of bone microarchitecture at the calcaneus as well as an increase in the tensile properties of the repaired ATC interfaces in canines. Clinical Relevance: Findings of the study indicate that local administration of metformin may be an effective strategy for TBI healing in clinic.

Immunoresponsive microbiota-gut-on-chip reproduces barrier dysfunction, stromal reshaping and probiotics translocation under inflammation

Here, we propose an immune-responsive human Microbiota-Intestine axis on-chip as a platform able to reproduce the architecture and vertical topography of the microbiota with a complex extracellular microenvironment consisting of a responsive extra cellular matrix (ECM) and a plethora of immune-modulatory mediators released from different cell populations such as epithelial, stromal, blood and microbial species in homeostatic and inflamed conditions. Firstly, we developed a three-dimensional human intestine model (3D-hI), represented by an instructive and histologically competent ECM and a well-differentiated epithelium with mucus-covered microvilli. Then, we replicated the microenvironmental anaerobic condition of human intestinal lumen by fabricating a custom-made microbiota chamber (MC) on the apical side of the Microbiota-human Intestine on chip (MihI-oC), establishing the physiological oxygen gradient occurring along the thickness of human small intestine from the serosal to the luminal side. The complexity of the intestinal extracellular microenvironment was improved by integrating cells populations that are directly involved in the inflammatory response such as peripheral blood mononuclear cells (PBMCs) and two species of the intestinal commensal microbiota (Lactobacillus rhamnosus and Bifidobacterium longum). We found that lipopolysaccharide (LPS)-induced inflammation elicits microbiota's geographical change and induce Bifidobacterium longum iper-proliferation, highlighting a role of such probiotic in anti-inflammatory process. Moreover, we proved, for the first time, the indirect role of the microbiota on stromal reshaping in immune-responsive MihI-oC in terms of collagen fibers orientation and ECM remodeling, and demonstrated the role of microbiota in alleviating gastrointestinal, immunological and infectious diseases by analyzing the release of key immune-mediators after inflammatory stimulus (reactive oxygen species (ROS), pro- and anti-inflammatory cytokines).

Disoriented collagen fibers and disorganized, fibrotic orbicularis oris muscle fiber with mitochondrial myopathy in non-syndromic cleft lip

ObjectiveThis study aims to explore and compare the histopathology of upper cleft lip tissue in order to identify the abnormalities and orientation of muscle and collagen fibers in patients affected with non-syndromic cleft lip with or without cleft palate (NSCL±P) and normal controls. Materials and methodsEight fresh lip tissues of consented patients with NSCL±P and two controls were fixed and stained with hematoxylin and eosin (H&E), Masson’s trichrome (MT), and modified Gomori trichrome techniques. The images were captured and examined using imaging cellSens software (Olympus, Tokyo, Japan) and Mirax Scan (Carl Zeiss, Germany). The H&E stained tissues were analysed for muscle fiber size using image processing program (imageJ, USA). Histopathological appearance of epidermal and dermal layers including collagen orientation, as well as muscle fibers abnormalities were observed. ResultsTissues stained with H&E exhibit pseudoepitheliomatous hyperplasia, epidermal and sebaceous glands hyperplasia. Morphometric analysis of muscle fibers showed the diameter was between 6.912 and 10.246 µm. Collagen fibers were densely packed in cleft tissue, but muscle fibers were sparse in MT stain. Modified Gomori trichrome stain revealed hypoplastic muscle with fibrosis, including ragged red fibers. ConclusionDisoriented collagen fibers, significant sparse and disorganized orbicularis oris muscle fibers with classical myopathic appearances proved that cleft tissue had abnormal histology findings. These findings further support the mechanism of collagen and muscle fibers during embryonic development that causing cleft formation.

Specialized Pro-Resolving Mediators Reduce Scarring After Cleft Lip Repair.

ObjectiveResidual scarring after cleft lip repair surgery remains a challenge for both surgeons and patients and novel therapeutics are critically needed. The objective of this preclinical experimental study was to evaluate the impact of the methyl-ester of pro-resolving lipid mediator lipoxin A4 (LXA4-ME) on scarring in a novel rabbit model of cleft lip repair.MethodsA defect of the lip was surgically created and repaired in eight six-week old New Zealand white rabbits to simulate human cleft lip scars. Rabbits were randomly assigned to topical application of PBS (control) or 1 ug of LXA4-ME (treatment). 42 days post surgery all animals were euthanized. Photographs of the cleft lip area defect and histologic specimens were evaluated. Multiple scar assessment scales were used to compare scarring.ResultsAnimals treated with LXA4-ME exhibited lower Visual Scar Assessment scores compared to animals treated with PBS. Treatment with LXA4-ME resulted in a significant reduction of inflammatory cell infiltrate and density of collagen fibers. Control animals showed reduced 2D directional variance (orientation) of collagen fibers compared to animals treated with LXA4-ME demonstrating thicker and more parallel collagen fibers, consistent with scar tissue.ConclusionsThese data suggest that LXA4-ME limits scarring after cleft lip repair and improves wound healing outcomes in rabbits favoring the resolution of inflammation. Further studies are needed to explore the mechanisms that underlie the positive therapeutic impact of LXA4-ME on scarring to set the stage for future human clinical trials of LXA4-ME for scar prevention or treatment after cleft lip repair.

Rapid and efficient characterization of cervical collagen orientation using linearly polarized colposcopic images

Collagen provides tissue strength and structural integrity. Quantification of the orientated dispersion of collagen fibers is an important factor when studying the mechanical properties of the cervix. In this study, for the first time, a new method for rapid characterization of the collagen fiber orientations of the cervix using linearly polarized light colposcopy is presented. A total of 24 colposcopic images were captured using a cross-polarized imaging system with white LED light sources. In the preprocessing stage, the Red channel of the RGB image was chosen, which contains no information of the blood vessels because of the low-absorption of blood cells in the red region. OrientationJ, which is an ImageJ plug-in, was used to estimate the local orientation of the collagen fibers. The result shows that in the nonpregnant cervix, the middle zone (Zone 2) has circumferentially aligned collagen fibers while the inner zone (Zone 1) has randomly arranged. The collagen fiber dispersion in Zone 2 is much smaller than that in Zone 1 at all four quadrants region (anterior, posterior, left, and right quadrant). This new analysis technique could potentially combine with diagnostic tools to provide a quantitative platform of collagen fibers in the clinic.

Micro/nanostructural properties of peri-implant jaw bones: a human cadaver study

PurposeMany points concerning the structure of osseointegration and the surrounding jaw bone remain unclear, and its optimal histological form has yet to be identified. The aim of this study was to clarify the structural characteristics of peri-implant jaw bone on the micro- and nano-scales by quantitatively evaluating bone quality.MethodsFive samples of human mandibular bone containing dental implants and one dentate sample that had been in place for some years while the donors were still alive were collected. Bulk staining was performed, and 100-μm-thick polished specimens were prepared. The osteon distributions in peri-implant bone and mandibular cortical bone were measured, after which alignment analysis of biological apatite (BAp) crystallites and anisotropy analysis of collagen fiber orientation using second-harmonic generation imaging were carried out.ResultsOsteons in the vicinity of the implant body ran parallel to it. In the cortical bone at the base of the mandible, however, most osteons were oriented mesiodistally. The preferential alignment of BAp crystallites was generally consistent with osteon orientation. The orientation of collagen fibers in peri-implant jaw bone resembled the concentric rings seen in normal cortical bone, but there were also fibers that ran orthogonally across these concentric fibers.ConclusionsThese results suggest that the mechanical strain imposed by implants causes the growth of cortical bone-like bone in areas that would normally consist of cancellous bone around the implants, and that its structural characteristics are optimized for the load environment of the peri-implant jaw bone.

Polarization Sensitive Photothermal Mid-Infrared Spectroscopic Imaging of Human Bone Marrow Tissue.

Collagen quantity and integrity play an important role in understanding diseases such as myelofibrosis (MF). Label-free mid-infrared spectroscopic imaging (MIRSI) has the potential to quantify collagen while minimizing the subjective variance observed with conventional histopathology. Infrared (IR) spectroscopy with polarization sensitivity provides chemical information while also estimating tissue dichroism. This can potentially aid MF grading by revealing the structure and orientation of collagen fibers. Simultaneous measurement of collagen structure and biochemical properties can translate clinically into improved diagnosis and enhance our understanding of disease progression. In this paper, we present the first report of polarization-dependent spectroscopic variations in collagen from human bone marrow samples. We build on prior work with animal models and extend it to human clinical biopsies with a practical method for high-resolution chemical and structural imaging of bone marrow on clinical glass slides. This is done using a new polarization-sensitive photothermal mid-infrared spectroscopic imaging scheme that enables sample and source independent polarization control. This technology provides 0.5µm spatial resolution, enabling the identification of thin (≈1µm) collagen fibers that were not separable using Fourier Transform Infrared (FT-IR) imaging in the fingerprint region at diffraction-limited resolution ( ≈ 5µm). Finally, we propose quantitative metrics to identify fiber orientation from discrete band images (amide I and amide II) measured under three polarizations. Previous studies have used a pair of orthogonal polarization measurements, which is insufficient for clinical samples since human bone biopsies contain collagen fibers with multiple orientations. Here, we address this challenge and demonstrate that three polarization measurements are necessary to resolve orientation ambiguity in clinical bone marrow samples. This is also the first study to demonstrate the ability to spectroscopically identify thin collagen fibers (≈1µm diameter) and their orientations, which is critical for accurate grading of human bone marrow fibrosis.

Effect of collagen fibre orientation on the Poisson's ratio and stress relaxation of skin: an ex vivo and in vivo study.

During surgical treatment skin undergoes extensive deformation, hence it must be able to withstand large mechanical stresses without damage. Therefore, understanding the mechanical properties of skin becomes important. A detailed investigation on the relationship between the three-dimensional deformation response of skin and its microstructure is conducted in the current study. This study also discloses the underlying science of skin viscoelasticity. Deformation response of skin is captured using digital image correlation, whereas micro-CT, scanning electron microscopy and atomic force microscopy are used for microstructure analysis. Skin shows a large lateral contraction and expansion (auxeticity) when stretched parallel and perpendicular to the skin tension lines, respectively. Large lateral contraction is a result of fluid exudation from the tissue, while large rotation of the stiff collagen fibres in the loading direction explains the skin auxeticity. During stress relaxation, lateral contraction and fluid effluxion from skin reveal that tissue volume loss is the intrinsic science of skin viscoelasticity. Furthermore, the results obtained from in vivo study on human skin show the relevance of the ex vivo study to physiological conditions and stretching of the skin during its treatments.

Circumferential Rim Augmentation Suture Around the Perimeniscal Capsule Decreases Meniscal Extrusion and Progression of Osteoarthritis in Rabbit Meniscus Root Tear Model

Background: We recently analyzed the joint capsule adjacent to the medial meniscus and found that the perimeniscal joint capsule has collagen fiber orientation similar to that of circumferential meniscal fibers, potentially playing a role in preventing extrusion. Purpose: To analyze the meniscal extrusion prevention potential of the circumferential rim augmentation suture around the perimeniscal capsule in a rabbit root tear model and analyze the biomechanical function in a porcine cadaveric knee. Study Design: Controlled laboratory study. Methods: Rabbit medial meniscus root tear models were divided into 3 experimental groups: root tear, root tear and suture repair, and root tear and circumferential rim augmentation suture. As for the circumferential rim augmentation suture procedure, a suture was placed to circumscribe the outer rim of the medial meniscus and passed through bone tunnels located at the tibial insertion of each root. After 4 and 8 weeks, meniscal extrusion was analyzed by micro–computed tomography, gross morphology, and histologic analysis of the medial femoral cartilage. For biomechanical analysis, porcine knees were divided into groups similar to rabbit experiments. Tibiofemoral contact parameters were assessed using a pressure mapping sensor system after applying a load of 200 N on the knee joint. Results: The root tear and circumferential rim augmentation suture group showed less meniscal extrusion, less gap within the tear site, and less cartilage degeneration compared with other groups after 4 and 8 weeks of surgery in the rabbit root tear model. Biomechanical analysis showed the root tear and circumferential rim augmentation suture group had larger contact area and lower peak contact pressure compared with root tear and root tear and suture repair groups. Conclusion: The circumferential rim augmentation suture reduced the degree of meniscal extrusion while restoring meniscal function, potentially preventing progression of arthritis in a rabbit root tear model and porcine knee biomechanical analysis. Clinical Relevance: The circumferential rim augmentation suture may be a novel augmentation option during root tear treatment.

Directed invasion of cancer cell spheroids inside 3D collagen matrices oriented by microfluidic flow in experiment and simulation

Invasion is strongly influenced by the mechanical properties of the extracellular matrix. Here, we use microfluidics to align fibers of a collagen matrix and study the influence of fiber orientation on invasion from a cancer cell spheroid. The microfluidic setup allows for highly oriented collagen fibers of tangential and radial orientation with respect to the spheroid, which can be described by finite element simulations. In invasion experiments, we observe a strong bias of invasion towards radial as compared to tangential fiber orientation. Simulations of the invasive behavior with a Brownian diffusion model suggest complete blockage of migration perpendicularly to fibers allowing for migration exclusively along fibers. This slows invasion toward areas with tangentially oriented fibers down, but does not prevent it.

Restorative and pain-relieving effects of fibroin in preclinical models of tendinopathy

The term tendinopathy indicates a wide spectrum of conditions characterized by alterations in tendon tissue homeostatic response and damage to the extracellular matrix. The current pharmacological approach involves the use of nonsteroidal anti-inflammatory drugs and corticosteroids often with unsatisfactory results, making essential the identification of new treatments. In this study, the pro-regenerative and protective effects of an aqueous fibroin solution (0.5–500 μg/mL) against glucose oxidase (GOx)-induced damage in rat tenocytes were investigated. Then, fibroin anti-hyperalgesic and protective actions were evaluated in two models of tendinopathy induced in rats by collagenase or carrageenan injection, respectively. In vitro, 5–10 μg/mL fibroin per se increased cell viability and reverted the morphological alterations caused by GOx (0.1 U/mL). Fibroin 10 μg/mL evoked proliferative signaling upregulating the expression of decorin, scleraxin, tenomodulin (p < 0.001), FGF-2, and tenascin-C (p < 0.01) genes. Fibroin enhanced the basal FGF-2 and MMP-9 protein concentrations and prevented their GOx-mediated decrease. Furthermore, fibroin positively modulated the production of collagen type I. In vivo, the peri-tendinous injection of fibroin (5 mg) reduced the development of spontaneous pain and hypersensitivity (p < 0.01) induced by the intra-tendinous injection of collagenase; the efficacy was comparable to that of triamcinolone. The pain-relieving action of fibroin (peri-tendinous) was confirmed in the model of tendinopathy induced by carrageenan (intra-tendinous) where this fibrous protein was also able to improve tendon matrix organization, normalizing the orientation of collagen fibers. In conclusion, the use of fibroin in tendinopathies is suggested taking advantage of its excellent mechanical properties, pain-relieving effects, and ability to promote tissue regeneration processes.

Real-time imaging of optic nerve head collagen microstructure and biomechanics using instant polarized light microscopy

Current tools lack the temporal or spatial resolution necessary to image many important aspects of the architecture and dynamics of the optic nerve head (ONH). We evaluated the potential of instant polarized light microscopy (IPOL) to overcome these limitations by leveraging the ability to capture collagen fiber orientation and density in a single image. Coronal sections through the ONH of fresh normal sheep eyes were imaged using IPOL while they were stretched using custom uniaxial or biaxial micro-stretch devices. IPOL allows identifying ONH collagen architectural details, such as fiber interweaving and crimp, and has high temporal resolution, limited only by the frame rate of the camera. Local collagen fiber orientations and deformations were quantified using color analysis and image tracking techniques. We quantified stretch-induced collagen uncrimping of lamina cribrosa (LC) and peripapillary sclera (PPS), and changes in LC pore size (area) and shape (convexity and aspect ratio). The simultaneous high spatial and temporal resolutions of IPOL revealed complex ONH biomechanics: i) stretch-induced local deformation of the PPS was nonlinear and nonaffine. ii) under load the crimped collagen fibers in the PPS and LC straightened, without torsion and with only small rotations. iii) stretch-induced LC pore deformation was anisotropic and heterogeneous among pores. Overall, with stretch the pores were became larger, more convex, and more circular. We have demonstrated that IPOL reveals details of collagen morphology and mechanics under dynamic loading previously out of reach. IPOL can detect stretch-induced collagen uncrimping and other elements of the tissue nonlinear mechanical behavior. IPOL showed changes in pore morphology and collagen architecture that will help improve understanding of how LC tissue responds to load.

Fluid mechanics approach to analyzing collagen fiber organization.

.Significance: The spatial organization of collagen fibers has been used as a biomarker for assessing injury and disease progression. However, quantifying this organization for complex structures is challenging.Aim: To quantify and classify complex collagen fiber organizations.Approach: Using quantitative second-harmonic generation (SHG) microscopy, we show that collagen-fiber orientation can be viewed as pseudovector fields. Subsequently, we analyze them using fluid mechanic metrics, such as energy , enstrophy , and tortuosity .Results: We show that metrics used in fluid mechanics for analyzing fluid flow can be adapted to analyze complex collagen fiber organization. As examples, we consider SHG images of collagenous tissue for straight, wavy, and circular fiber structures.Conclusions: The results of this study show the utility of the chosen metrics to distinguish diverse and complex collagen organizations. We find that the distribution of values for and increases with collagen fiber disorganization, where they divide between low and high values corresponding to uniformly aligned fibers and disorganized collagen fibers, respectively. We also confirm that the values of cluster around 1 when the fibers are straight, and the range increases up to 1.5 when wavier fibers are present.

Skin Grafting Using Collagen Fiber Orientation Matching.

Background:Skin contracture after skin grafting is undesirable. It is generally accepted that full-thickness skin grafts contract less than split-thickness skin grafts. However, unexpected secondary skin-graft contracture sometimes occurs after full-thickness skin grafting. We tried to elucidate the causes of skin contracture from the viewpoint of the orientation of collagen fibers to find a way to reduce skin-graft contracture.Method:First, we examined the collagen fiber orientation of the skin over the whole body in Sprague-Dawley rats. Next, two pieces of skin (width: 30 mm × 30 mm; thickness: ca. 2 mm) were stripped off a rat for grafting. The pieces were grafted to different sites so that the collagen fibers of the graft and surrounding skin ran parallel or perpendicular to each other. The collagen fiber orientation before and after the skin grafting was determined using Osaki’s microwave method, a mechanical method, and scanning electron microscopy.Results:The rat skin exhibited marked variations in collagen fiber orientation among different sites. The direction of the collagen fiber orientation corresponded to that of minimal mechanical strain. We found that the collagen fiber orientation in skin grafts remained almost unchanged after skin grafting.Conclusions:Mismatched collagen fiber orientation between grafts and the surrounding skin is considered to be a cause of secondary contracture after skin grafting. We propose that skin grafts that minimize the difference in collagen fiber orientation between the skin graft and the surrounding skin should be selected.

Potential-Driven Electrochemical Clearing of Ex Vivo Alkaline Corneal Injuries.

PurposeCorneal chemical injuries (CCI) obscure vision by opacifying the cornea; however, current treatments may not fully restore clarity. Here, we investigated potential-driven electrochemical treatment (P-ECT) to restore clarity after alkaline-based CCI in ex vivo rabbit corneas and examined collagen fiber orientation changes using second harmonic generation (SHG).MethodsNaOH was applied to the corneas of intact New Zealand white rabbit globes. P-ECT was performed on the opacified cornea while optical coherence tomography (OCT) imaging (∼35 frames per second) was simultaneously performed. SHG imaging evaluated collagen fiber structure before NaOH application and after P-ECT. Irrigation with water served as a control.ResultsP-ECT restored local optical clarity after NaOH exposure. OCT imaging shows both progression of NaOH injury and the restoration of clarity in real time. Analysis of SHG z-stack images show that collagen fibril orientation is similar between control, NaOH-damaged, and post-P-ECT corneas. NaOH-injured corneas flushed with water (15 minutes) show no restoration of clarity.ConclusionsP-ECT may be a means to correct alkaline CCI. Collagen fibril orientation does not change after NaOH exposure or P-ECT, suggesting that no irreversible matrix level fiber changes occur. Further studies are required to determine the mechanism for corneal clearing and to ascertain the optimal electrical dosimetry parameters and electrode designs.Translational RelevanceOur findings suggest that P-ECT is a potentially effective, low-cost treatment for alkaline CCI.

Incorporation of Superparamagnetic Iron Oxide Nanoparticles into Collagen Formulation for 3D Electrospun Scaffolds.

Nowadays, there is an ever-increasing interest in the development of systems able to guide and influence cell activities for bone regeneration. In this context, we have explored for the first time the combination of type-I collagen and superparamagnetic iron oxide nanoparticles (SPIONs) to design magnetic and biocompatible electrospun scaffolds. For this purpose, SPIONs with a size of 12 nm were obtained by thermal decomposition and transferred to an aqueous medium via ligand exchange with dimercaptosuccinic acid (DMSA). The SPIONs were subsequently incorporated into type-I collagen solutions to prove the processability of the resulting hybrid formulation by means of electrospinning. The optimized method led to the fabrication of nanostructured scaffolds composed of randomly oriented collagen fibers ranging between 100 and 200 nm, where SPIONs resulted distributed and embedded into the collagen fibers. The SPIONs-containing electrospun structures proved to preserve the magnetic properties of the nanoparticles alone, making these matrices excellent candidates to explore the magnetic stimuli for biomedical applications. Furthermore, the biological assessment of these collagen scaffolds confirmed high viability, adhesion, and proliferation of both pre-osteoblastic MC3T3-E1 cells and human bone marrow-derived mesenchymal stem cells (hBM-MSCs).