Oriented Immobilization Of Antibodies Research Articles

Poly(glycidyl methacrylate) nanoparticle-coated capillary with oriented antibody immobilization for immunoaffinity in-tube solid phase microextraction: Preparation and characterization

A combination between modification with nanoparticles (NP) and oriented antibody immobilization (OAI) on the inner face of capillary was for the first time developed for immunoaffinity in-tube solid-phase microextraction (SPME) to promise high antigen extraction capacity. β2-microglobin (β2MG) and cystatin C (Cys-C) were selected as model antigens. Poly(glycidyl methacrylate) (PGMA) NPs were chemically immobilized onto the capillary by a ring-opening reaction. Antibodies for β2MG and Cys-C were immobilized on the NPs through OAI. Scanning electron micrograph of the OAI capillary clearly showed that the PGMA NPs were coated onto the inner surface of capillary in a dense monolayer. In addition, random antibody immobilized (RAI) capillaries and OAI capillaries without NP were also prepared as controls. The extraction capacities of OAI capillaries were 2.02 and 2.18mgm−1 for β2MG and Cys-C, and were about 5 and 6 times as many as RAI capillaries and OAI capillaries without NP, respectively. The resultant capillaries were used as in-tube SPME materials to enrich β2MG and Cys-C for particle-enhanced turbidimetric immunoassay. When using 1.0mgL−1 standard solutions, the recoveries of OAI capillaries, RAI capillaries and OAI capillaries without NP were 103.6% and 96.8%, 48.5% and 31.5%, and 24.2% and 25.7% for β2MG and Cys-C, respectively. Furthermore, the method quantitation limit by OAI capillaries was 5 and 10 times lower than that by RAI capillaries and OAI capillaries without NP, respectively. This result indicated that the NP-coated capillaries with OAI are more suitable for using as immunoaffinity in-tube SPME materials than that with RAI.

Orientation and characterization of immobilized antibodies for improved immunoassays (Review).

Orientation of surface immobilized capture proteins, such as antibodies, plays a critical role in the performance of immunoassays. The sensitivity of immunodiagnostic procedures is dependent on presentation of the antibody, with optimum performance requiring the antigen binding sites be directed toward the solution phase. This review describes the most recent methods for oriented antibody immobilization and the characterization techniques employed for investigation of the antibody state. The introduction describes the importance of oriented antibodies for maximizing biosensor capabilities. Methods for improving antibody binding are discussed, including surface modification and design (with sections on surface treatments, three-dimensional substrates, self-assembled monolayers, and molecular imprinting), covalent attachment (including targeting amine, carboxyl, thiol and carbohydrates, as well as "click" chemistries), and (bio)affinity techniques (with sections on material binding peptides, biotin-streptavidin interaction, DNA directed immobilization, Protein A and G, Fc binding peptides, aptamers, and metal affinity). Characterization techniques for investigating antibody orientation are discussed, including x-ray photoelectron spectroscopy, spectroscopic ellipsometry, dual polarization interferometry, neutron reflectometry, atomic force microscopy, and time-of-flight secondary-ion mass spectrometry. Future perspectives and recommendations are offered in conclusion.

An ultrasensitive amperometric immunosensor for zearalenones based on oriented antibody immobilization on a glassy carbon electrode modified with MWCNTs and AuPt nanoparticles

The family of zearalenones (ZENs) represents a major group of mycotoxins with estrogenic activity. They are produced by Fusarium fungi and cause adverse effects on human health and animal production. The authors describe here a label-free amperometric immunosensor for the direct determination of ZENs. A glassy carbon electrode (GCE) was first modified with polyethyleneimine-functionalized multi-walled carbon nanotubes. Next, gold and platinum nanoparticles (AuPt-NPs) were electro-deposited. This process strongly increased the surface area for capturing a large amount of antibodies and enhanced the electrochemical performance. In a final step, monoclonal antibody against zearalenone was orientedly immobilized on the electrode, this followed by surface blocking with BSA. The resulting biosensor was applied to the voltammetry determination of ZENs, best at a working voltage of 0.18 V (vs SCE). Under optimized conditions, the method displays a wide linear range that extends from 0.005 to 50 ng mL−1, with a limit of detection of 1.5 pg mL−1 (at an S/N ratio of 3). The assay is highly reproducible and selective, and therefore provides a sensitive and convenient tool for determination of such mycotoxins.

Advancing the global proteome survey platform by using an oriented single chain antibody fragment immobilization approach

Increasing the understanding of a proteome and how its protein composition is affected by for example different diseases, such as cancer, has the potential to improve strategies for early diagnosis and therapeutics. The Global Proteome Survey or GPS is a method that combines mass spectrometry and affinity enrichment with the use of antibodies. The technology enables profiling of complex proteomes in a species independent manner. The sensitivity of GPS, and other methods relying on affinity enrichment, is largely affected by the activity of the exploited affinity reagent. We here present an improvement of the GPS platform by utilizing an antibody immobilization approach which ensures a controlled immobilization process of the antibody to the magnetic bead support. More specifically, we make use of an antibody format that enables site-directed biotinylation and use this in combination with streptavidin coated magnetic beads. The performance of the expanded GPS platform was evaluated by profiling yeast proteome samples. We demonstrate that the oriented antibody immobilization strategy increases the ability of the GPS platform and results in larger fraction of functional antibodies. Additionally, we show that this new antibody format enabled in-solution capture, i.e. immobilization of the antibodies after sample incubation. A workflow has been established that permit the use of an oriented immobilization strategy for the GPS platform.

High-efficiency immunoassay platforms with controllable surface roughness and oriented antibody immobilization.

High-efficiency immunoassay platforms with controlled surface roughness (single- and dual-scale structured surface) were prepared by combining a facile layer-by-layer particle deposition approach with oriented immobilization of antibodies through boronic acid moieties. The as-prepared surfaces showed significantly enhanced antibody loading capacity and antigen recognition, as proved by fluorescence images.

Phenylboronic acid polymer brush-enabled oriented and high density antibody immobilization for sensitive microarray immunoassay

There still has a big challenge for low-abundance protein detection with antibody microarrays. In this work, phenylboronic acid (PBA) polymer brush-enabled oriented, high density, and covalent antibody immobilization was realized for sensitive antibody microarrays. PBA-enabled oriented antibody attachment via carbohydrate at Fc portion keeps antigen-binding sites fully expose to their corresponding antigens, resulting in higher antibody–antigen (Ab–Ag) binding efficiency. Sandwich immunoassay with rabbit IgG as model analyte was performed on poly(glycidyl methacrylate)-amino-phenylboronic acid-coated glass slide (PGMA-APBA-slide). One order improvement of LOD was achieved as compared with that on poly(glycidyl methacrylate) glass slide (PGMA-slide). The improvement is mainly attributed to PBA-assisted high density and oriented antibody immobilization. This work provides a versatile and effective strategy to develop high sensitive antibody microarrays for low-abundance protein analysis in various proteomic applications.

Automated enzyme-linked immunosorbent assay using beads in a single tip (BIST) technology coupled with a novel anchor protein for oriented antibody immobilization

An automated enzyme-linked immunosorbent assay (ELISA) system was developed using beads in a single tip (BIST) technology. Sandwich ELISA was performed on glass beads functionalized with a capture antibody via the fusion of antibody-binding streptococcal protein G and a silica/glass-binding protein Si-tag. Our system enables rapid, sensitive detection of antigens.

Strategy of Fc-Recognizable Peptide Ligand Design for Oriented Immobilization of Antibody

A new strategy for designing a short-chain peptide ligand with high affinity to the Fc region of an antibody was proposed. The targeted antibody is human prostate specific antibody (PSA) derived from Mouse IgG2a. The ligand design strategy involves two major parts: binding site selection and peptide ligand design. One of the exposed hydrophobic patches near the bottom of the antibody's Fc region, identified from the molecular docking of naphthelene and end-capped tryptophan, was selected as the binding site. After examining the charge distribution around the binding site, various peptide ligands were designed according to the possible hydrophobic and electrostatic interactions. A peptide ligand, RRGW, was found to have high Fc binding affinity by the analysis of molecular dynamics (MD) simulation. The first two residues, two arginines, play an important role in electrostatic interaction between the peptide and the Fc region of the antibody. The fourth residue, the tryptophan, provides the VDW force; and the flexibility of peptide is achieved through the help of the third residue, the glycine. The binding affinity, recognition efficiency, and orientation factor were calculated from the results of surface plasmon resonance (SPR) measurements. The result shows that the dissociation constant is 5.56 × 10(-10) M(-1). We also found that the recognition efficiency and orientation factor on the ligand attached surface were much higher than those on negatively and positively charged surfaces. This approach provides a simple and fast strategy for small ligands design on oriented antibody immobilization.

Electrochemical Biosensors Featuring Oriented Antibody Immobilization via Electrografted and Self-Assembled Hydrazide Chemistry

Appropriate site-directed chemistry is essential to maximize the performance of immunosensors. We present two new functionalization strategies that preserve proper folding and binding potential of antibodies by forcing their oriented immobilization. Both strategies are based on the formation of hydrazone bonds between aldehyde groups on the Fc moieties of periodate-oxidized antibodies and hydrazide groups on functionalized gold electrodes. Those hydrazide groups are introduced by electrografting of diazonium salts or by self assembly of mono- and dithiolated hydrazide linkers, resulting in films with tailored functional groups and, thus, antibody distribution and spacing. Their barrier properties and permeability toward electroactive species are evaluated. To demonstrate the potential of these new functionalization strategies, detection of bacteriophage MS2 is performed through either a direct assay using electrochemical impedance spectroscopy (EIS) or through a sandwich assay using differential pulse voltammetry (DPV). Diazonium and monothiolated self-assembled monolayer-modified electrodes enable the detection of less than 1 plaque forming unit (pfu)/mL in a direct EIS assay. However, nonspecific adsorption renders measurements in river water samples difficult. In contrast, sandwich-assays on electrodes with electrografted diazonium salts and monothiolated self-assembled monolayers do not show significant matrix effects using river water samples, but the limits of detection are 10(8) times higher than those of the direct assay. Best results are achieved for immunosensors based on mixed monolayers of hydrazide and hydroxyl diothiolated linkers (15 pfu/mL). These new functionalization techniques are facile to implement. They afford the possibility to tune the surface composition and tailor the electrochemical properties of electrochemical sensors. These advantages should translate into broad interest in this type of surface chemistry for biosensor development.

Disposable immunosensor using a simple method for oriented antibody immobilization for label-free real-time detection of an oxidative stress biomarker implicated in cancer diseases

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2′-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented methodology favored Ab/Ag affinity and immunodetection of the antigen.The immunosensor design was evaluated by quartz-crystal microbalance with dissipation, atomic force microscopy, electrochemical impedance spectroscopy (EIS) and square-wave voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charge transfer resistance across the electrochemical set-up. The observed behavior was linear from 0.02 to 7.0ng/mL of 8OHdG concentrations. The interference from glucose, urea and creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted.Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

Comparative Assessment of Oriented Antibody Immobilization on Surface Plasmon Resonance Biosensing

AbstractProtein A and protein G are extremely useful molecules for the immobilization of antibodies. However, there are limited comparative reports available to evaluate their immobilization performance for use as biosensors. In this study, a comparative analysis was made of approaches that use protein A and protein G for avian leukosis virus detection. The antibody‐protein binding affinities were determined using surface plasmon resonance (SPR) analysis. The immobilization efficiency was obtained by calculating the number of the protein molecular binding sites. The positive influence of sensor response on antigen detection indicates that the amount of immobilized antibody plays a major role in the extent of immobilization. Moreover, the biosensors constructed using both proteins were found to be regenerative. The SPR results from this study suggest that the surfaces of protein G provide a better equilibrium constant and binding efficacy for immobilized antibodies, resulting in enhanced antigen detection.

A comparative study on antibody immobilization strategies onto solid surface

Antibody immobilization onto solid surface has been studied extensively for a number of applications including immunoassays, biosensors, and affinity chromatography. For most applications, a critical consideration regarding immobilization of antibody is orientation of its antigen-binding site with respect to the surface. We compared two oriented antibody immobilization strategies which utilize thiolated-protein A/G and thiolated-secondary antibody as linker molecules with the case of direct surface immobilization of thiol-conjugated target antibody. Antibody immobilization degree and surface topography were evaluated by surface plasmon resonance and atomic force microscope, respectively. Protein A/G-mediated immobilization strategy showed the best result and secondary antibody-mediated immobilization was the worst for the total immobilization levels of target antibodies. However, when considering real-to-ideal ratio for antigen binding, total target antigen binding levels (oriented target antibody immobilization levels) had the following order: secondary antibody-mediated immobilization>protein A/G-mediated immobilization>direct thiol-conjugated immobilization. Thus, we confirmed that protein A/G- and secondary antibody-mediated strategies, which consider orientation of target antibody immobilization, showed significantly high antigen binding efficiencies compared to direct random immobilization method. Collectively, the oriented antibody immobilization methods using linker materials could be useful in diverse antibody-antigen interaction-involved application fields.

Oriented antibody immobilization by site-specific UV photocrosslinking of biotin at the conserved nucleotide binding site for enhanced antigen detection

The nucleotide binding site (NBS) is an under-utilized, highly conserved binding site found within the variable region of nearly all antibody Fab arms. Here, we describe an NBS specific UV photocrosslinking biotinylation method (UV-NBSBiotin) for the oriented immobilization of antibodies to streptavidin-coated surfaces, such that the antigen binding activity remains unaffected. An optimal UV exposure of 1J/cm2 yielded an average conjugation efficiency of ∼1 biotin per antibody resulting in significant immobilization efficiency while maintaining maximal antigen binding activity. With the continued push for miniaturization of medical diagnostics to reduce cost and increase patient accessibility the ever shrinking on chip detection areas necessitate the highest level of immobilized antibody activity to maximize assay detection capabilities. The UV-NBSBiotin method yielded surfaces with significantly enhanced antigen detection capabilities, improved antigen detection sensitivity and the highest amount of active surface immobilized antibody when compared to other common immobilization methods including: ε-NH3+ surface conjugation, NHS–Biotin, and direct physical adsorption. Taken together, the UV-NBSBiotin method provides a universal, site-specific immobilization method that is amenable to any available assay detection modality with potential significant implications in the development of miniaturized medical diagnostics and lab on a chip technologies.

A protein A modified Au–graphene oxide composite as an enhanced sensing platform for SPR-based immunoassay

A sensitive and selective wavelength modulation surface plasmon resonance (SPR) biosensor is reported with Au nanoparticle decorated graphene oxide (GO) as an enhanced sensing platform. GO sheets possess favourable water dispersibility, good biocompatibility and high loading capacity. An Au-GO composite with the Au spheres size of 15-20 nm was synthesized and modified with staphylococcal protein A (SPA). The as-prepared composite assembles directly onto the Au film surface of the SPR sensor. Meanwhile, SPA specifically recognizes and binds the Fc portion of antibodies, contributing to highly oriented antibody immobilization on the chip surface without any antibody modification. Consequently, the biosensor based on the SPA modified Au-GO composite exhibits a satisfactory response to rabbit IgG in the concentration range of 0.1-50 μg mL(-1), while the biosensor based on the sole SPA layer for antibody immobilization shows a response in the concentration range of 1.6-50 μg mL(-1). Experimental results show that the SPA modified Au-GO composite can be successfully used for the signal amplification of immunosensors, thereby improving the sensitivity and obviating the need of chemical modification of the antibody.

Facile and oriented antibody immobilization on α-cyclodextrin-modified sensors surfaces

Facile and oriented antibody immobilization on α-cyclodextrin-modified sensors surfaces

Comparative Study of Random and Oriented Antibody Immobilization as Measured by Dual Polarization Interferometry and Surface Plasmon Resonance Spectroscopy

Dual polarization interferometry (DPI) is used for a detailed study of antibody immobilization with and without orientation control, using prostate specific antigen (PSA) and its antibody as model. Thiol modified DPI chips were activated by a heterobifunctional cross-linker (sulfo-GMBS). PSA antibody was either directly immobilized via covalent binding or coupled via the Fc-fragment to protein G covalently attached to the activated chip. The direct covalent binding leads to a random antibody orientation and the coupling through protein G leads to an end-on orientation. Ethanolamine (ETH) was used to block remaining active sites following the direct antibody immobilization and protein G immobilization. A homobifunctional cross-linker (BS3) was used to stabilize the antibody layer coupled on protein G. DPI provides a real-time measurement of the stepwise molecular binding processes and gives detailed geometrical and structural values of each layer, i.e., thickness, mass, and density. These values evidence the end-on orientation of closely packed antibody on protein G layer and reveal structural effects of ETH blocking/deactivation and BS3 stabilization. With the end-on immobilized antibody, PSA at 10 pg/mL can be detected by DPI through a sandwich complex that satisfies the clinical requirement (assuming <30 pg/mL as clinically safe). However, the randomly immobilized antibody failed to detect PSA at 1 ng/mL. In a parallel study using surface plasmon resonance (SPR) spectroscopy, random and end-on antibody immobilization on streptavidin-modified gold surface was evaluated to further validate the importance of antibody orientation control. With the closely packed antibody layer on protein G surface, SPR can also detect PSA at 10 pg/mL.

3D antibody immobilization on a planar matrix surface

The amount of active capture antibodies immobilized per unit square is crucial to developing effective antibody chips, biosensors, immunoassays and other molecular recognition technologies. In this study, we present a novel yet simple method for oriented antibody immobilization at high density based on the formation of an orderly, organized aggregation of immunoglobulin G (IgG) and staphylococcal protein A (SPA). Following the chelation of His-tag with Ni2+, antibodies were immobilized on a solid surface in a three-dimensional (3D) manner and exposed the analyte receptor sites well, which resulted in a substantial enhancement of the analytical signal with more than 64-fold increase in detection sensitivity. Pull-down assays confirmed that IgG antibody can only bind to Ni2+ matrix indirectly via a SPA linkage, where the His-tag is responsible for binding Ni2+ and homologous domains are responsible for binding IgG Fc. The immobilization approach proposed here may be an attractive strategy for the construction of high performance antibody arrays and biosensors as long as the antibody probe is of mammalian IgG.

Oriented immobilized anti-LDL antibody carrying poly(hydroxyethyl methacrylate) cryogel for cholesterol removal from human plasma

Low density lipoprotein (LDL) cholesterol is a major ingredient of the plaque that collects in the coronary arteries and causes coronary heart diseases. Among the methods used for the extracorporeal elimination of LDL from intravasal volume, immunoaffinity technique using anti-LDL antibody as a ligand offers superior selectivity and specificity. Proper orientation of the immobilized antibody is the main issue in immunoaffinity techniques. In this study, anti-human β-lipoprotein antibody (anti-LDL antibody) molecules were immobilized and oriented through protein A onto poly(2-hydroxyethyl methacrylate) (PHEMA) cryogel in order to remove LDL from hypercholesterolemic human plasma. PHEMA cryogel was prepared by free radical polymerization initiated with N,N,N′,N′-tetramethylene diamine (TEMED). PHEMA cryogel with a swelling degree of 8.89 g H 2O/g and 67% macro-porosity was characterized by swelling studies, scanning electron microscope (SEM) and blood compatibility tests. All the clotting times were increased when compared with control plasma. The maximum immobilized anti-LDL antibody amount was 63.2 mg/g in the case of random antibody immobilization and 19.6 mg/g in the case of oriented antibody immobilization (protein A loading was 57.0 mg/g). Random and oriented anti-LDL antibody immobilized PHEMA cryogels adsorbed 111 and 129 mg LDL/g cryogel from hypercholesterolemic human plasma, respectively. Up to 80% of the adsorbed LDL was desorbed. The adsorption–desorption cycle was repeated 6 times using the same cryogel. There was no significant loss of LDL adsorption capacity.

Comparative Study of Random and Oriented Antibody Immobilization Techniques on the Binding Capacity of Immunosensor

A comparative study of four different antibody immobilization techniques that are suitable for modification of surface plasmon resonance (SPR) chip (SPR-chip) is reported. Antibodies against human growth hormone (anti-HGH) were used as the model system. The evaluated SPR-chip modification techniques were (i) random immobilization of intact anti-HGH (intact-anti-HGH) via self-assembled monolayer (SAM) based on 11-mercaptoundecanoic acid (MUA); (ii) random immobilization of intact-anti-HGH within carboxymethyl dextran (CMD) hydrogel by direct covalent amine coupling technique; (iii) oriented coupling of intact-anti-HGH via Fc-fragment to protein-G layer assembled on SAM consisting of MUA (MUA/pG); (iv) oriented immobilization of fragmented anti-HGH antibodies (frag-anti-HGH) via their native thiol-groups directly coupled to the gold. To liberate these thiol groups, the intact-anti-HGH was chemically "divided" into two frag-anti-HGH fragments by chemical reduction with 2-mercaptoethylamine (2-MEA). Optimal concentration of 2-MEA for preparation of anti-HGH was 15 mM. The surface concentration of immobilized antibodies and the antigen binding capacity for all four differently modified SPR-chips was evaluated and compared. The maximum surface concentration of immobilized intact-anti-HGH was obtained by immobilizing the antibody within CMD-hydrogel. The maximal antigen binding capacity was obtained by SPR-chip based on intact-anti-HGH immobilized via MUA/pG. The immobilization based on application of frag-anti-HGH was found to be the most suitable for design of SPR-immunosensor for HGH detection, due to its sufficient antigen binding capacity, simplicity, and low cost in respect to the currently evaluated techniques.

Direct Immobilization of Protein G Variants with Various Numbers of Cysteine Residues on a Gold Surface

Protein G is an antibody binding protein, which specifically targets the Fc region of an antibody. It therefore has been widely used to immobilize different types of antibodies in numerous immunoassays. Here, we have engineered Streptococcus protein G to contain various numbers of cysteine residues at the N-terminus and therefore to form well-oriented protein G films on bare gold. SPR and SPR imaging analyses indicated that a gold surface treated with cysteine-tagged protein G possesses a superior antibody binding ability compared to one treated with tag-free protein G. AFM images indicated a higher surface coverage by antibody binding on the cysteine-tagged protein G surface than the intact protein G surface. The proper orientation of cysteine-tagged protein G on a gold surface also afforded better orientation of immobilized antibodies, resulting in enhanced antigen detection. Moreover, the protein G surfaces maintained their high antibody binding ability during multiple rounds of antibody interaction tests. The cysteine-tagged protein G constructed in this study can be a valuable link for oriented antibody immobilization in a variety of immunosensors.