Organic Photoredox Catalyst Research Articles

Organic photoredox catalysts for CO2 reduction: Driving discovery with genetic algorithms.

This work implements a genetic algorithm (GA) to discover organic catalysts for photoredox CO2 reduction that are both highly active and resistant to degradation. The lowest unoccupied molecular orbital energy of the ground state catalyst is chosen as the activity descriptor and the average Mulliken charge on all ring carbons is chosen as the descriptor for resistance to degradation via carboxylation (both obtained using density functional theory) to construct the fitness function of the GA. We combine the results of multiple GA runs, each based on different relative weighting of the two descriptors, and rigorously assess GA performance by calculating electron transfer barriers to CO2 reduction. A large majority of GA predictions exhibit improved performance relative to experimentally studied o-, m-, and p-terphenyl catalysts. Based on stringent cutoffs imposed on the average charge, barrier to electron transfer to CO2, and excitation energy, we recommend 25 catalysts for further experimental investigation of viability toward photoredox CO2 reduction.

Visible-Light-Induced N-Acylation of Sulfoximines.

A metal-, base-, and additive-free N-acylation of sulfoximines was developed under mild conditions using organic photoredox catalyst. This green strategy featured broad substrate scope, good compatibility with air, and high yields (up to 96%). It could be further applied to amino acid modifications and α-keto N-acyl sulfoximine synthesis without any complicated transformations or operations.

Organic photoredox catalysts for wastewater remediation: Beyond the established advanced oxidation processes

Contaminants of emerging concern (CECs) constitute a wide class of organic molecules, which are found dissolved in wastewaters. Chemical properties of CECs are as wide as their chemical structures; nevertheless, most of the CECs can be removed from wastewaters using Advanced Oxidation Processes (AOPs). However, there are examples of CECs that have proven recalcitrant to AOPs. In such cases, Advanced Reduction Processes (ARPs) include those techniques able to achieve degradation of contaminants by producing highly reactive reducing radicals.Organic photocatalysts have demonstrated to be an efficient alternative to other types of photocatalysts in AOPs. Moreover, several organic photocatalysts, according to their redox properties, could also act as reductants under appropriate scenarios, a process that has been much less explored than oxidation. As an example, Riboflavin (RF) is a natural water-soluble molecule, well-known as vitamin B2. The photophysical and redox properties of RF have been extensively applied for the oxidative photodegradation of contaminants in water. More recently, the potential of RF has been expanded to the photoreduction of more recalcitrant pollutants. For instance, benzotriazoles UV-stabilizers (BUVSs) constitute a vast family of recalcitrant contaminants, which have been successfully degraded in the presence of a commercially available derivative of RF (2′,3′,4′,5′-tetraacetylated riboflavin, RFTA) and visible light, assisted by an amine, which acts as electron donor to the excited states of RFTA, generating the RFTA.−. This species ultimately produces the reduction of the selected BUVSs. Photophysical experiments demonstrated the key role of the radical anion RFTA.−, and allowed determining the rate constants that were correlated to the observed photodegradations.

Catalytic Asymmetric Construction of Axially and Centrally Chiral Heterobiaryls by Minisci Reaction

Axially chiral biaryls and heterobiaryls constitute the most represented subclass of atropisomers with prevalence in natural products, bioactive compounds, privileged chiral ligand/catalysts, and optically pure materials. Despite many ionic protocols for their construction, radical-based variants represent another highly desirable and intriguing strategy but are far less developed. Moreover, efficient synthesis of axially chiral heterobiaryl molecules, especially ones having multiple heteroatoms and other types of chiral elements, through radical routes remains extremely limited. We herein disclose the first catalytic asymmetric, metal-free construction of axially and centrally chiral heterobiaryls by Minisci reaction of 5-arylpyrimidines and α-amino acid-derived redox-active esters. This is enabled by the use of 4CzIPN as an organic photoredox catalyst in conjunction with a chiral phosphoric acid catalyst. The reaction achieved a variety of interesting 5-arylpyrimidines featuring the union of an axially chiral heterobiaryl and a centrally chiral α-branched amine with generally excellent regio-, diastereo-, and enantioselectivity (up to 82% yield; >19:1 dr; >99% ee). This finding also builds up a new platform for the development of desymmetrization methods via radical-involved atroposelective functionalization at heteroarene of prochiral heterobiaryls.

Photoredox Organocatalysis for the Enantioselective Synthesis of 1,7-Dicarbonyl Compounds.

We describe an asymmetric organocatalytic method to synthesize 1,7-dicarbonyl compounds containing a β-stereocenter. The chemistry relies on the formation of γ-keto radicals, generated upon oxidative ring opening of cyclobutanols mastered by an organic photoredox catalyst. These nonstabilized primary radicals are stereoselectively intercepted by an iminium ion intermediate, formed upon activation of aliphatic and aromatic enals by a chiral secondary amine catalyst. This organocatalytic photoredox method served to prepare scaffolds found in natural products and drug molecules.

Visible-Light-Induced Selective C–C Bond Cleavage Reactions of Dimeric β-O-4 and β-1 Lignin Model Substrates Utilizing Amine-Functionalized Fullerene

Finding a selective and efficient fragmentation process under ambient conditions is pivotal for the generation of fuels and chemical feedstocks from lignoceullosic biomass. In the present study, visible-light and amine-functionalized fullerene-based photocatalyst-promoted photodegradation reactions of dimeric β-O-4 and β-1 lignin model compounds, containing varying numbers of methoxy substituents on the arene ring, were explored to find and develop mild, eco-friendly photochemical techniques for efficient delignification. The results showed that, in contrast to well-known organic photoredox catalysts, amine-functionalized fullerene photocatalyst promoted photochemical reactions of lignin model compounds could lead to more efficient lignin fragmentation reactions through a pathway involving a selective Cα-Cβ bond cleavage process, and in addition, Cα-hydroxyl moiety in lignin model compounds played a significant role in the success of the Cα-Cβ bond cleavage reaction of lignin model substrates.

Photoredox Chemistry with Organic Catalysts: Role of Computational Methods.

Organic catalysts have the potential to carry out a wide range of otherwise thermally inaccessible reactions via photoredox routes. Early demonstrated successes of organic photoredox catalysts include one-electron CO2 reduction and H2 generation via water splitting. Photoredox systems are challenging to study and design owing to the sheer number and diversity of phenomena involved, including light absorption, emission, intersystem crossing, partial or complete charge transfer, and bond breaking or formation. Designing a viable photoredox route therefore requires consideration of a host of factors such as absorption wavelength, solvent, choice of electron donor or acceptor, and so on. Quantum chemistry methods can play a critical role in demystifying photoredox phenomena. Using one-electron CO2 reduction with phenylene-based chromophores as an illustrative example, this perspective highlights recent developments in quantum chemistry that can advance our understanding of photoredox processes and proposes a way forward for driving the design and discovery of organic catalysts.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis.

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Organic long-persistent luminescence stimulated by visible light in p-type systems based on organic photoredox catalyst dopants.

Organic long-persistent-luminescent (OLPL) materials demonstrating hour-long photoluminescence have practical advantages in applications owing to their flexible design and easy processability. However, the energy absorbed in these materials is typically stored in an intermediate charge-separated state that is unstable when exposed to oxygen, thus preventing persistent luminescence in air unless oxygen penetration is suppressed through crystallization. Moreover, OLPL materials usually require ultraviolet excitation. Here we overcome such limitations and demonstrate amorphous OLPL systems that can be excited by radiation up to 600 nm and exhibit persistent luminescence in air. By adding cationic photoredox catalysts as electron-accepting dopants in a neutral electron-donor host, stable charge-separated states are generated by hole diffusion in these blends. Furthermore, the addition of hole-trapping molecules extends the photoluminescence lifetime. By using a p-type host less reactive to oxygen and tuning the donor-acceptor energy gap, our amorphous blends exhibit persistent luminescence stimulated by visible light even in air, expanding the applicability of OLPL materials.

Transition-Metal-Free Access to 2-Subsituted Indolines from Indoles via Dearomative Nucleophilic Addition Using Two-Molecule Organic Photoredox Catalysts

A Photoinduced dearomative nucleophilic addition to N-Boc indoles mediated by two-molecule organic photoredox catalysts such as phenanthrene and 1,4-dicyanobenzene with UV irradiation furnished 2-substituted indolines in moderate to quantitative yields. Hydroxide, alkoxide, and cyanide ions can be used as a nucleophile to provide 2-hydroxy, 2-alkoxy, and 2-cyanoindolines, respectively. Both electron-rich and -deficient indoles, including tryptophan derivatives, can be employed in the photoreaction to provide various indolines. This method provides transition-metal-free access to 2-subsituted indolines from indoles using organic photoredox catalysts under mild conditions.

Radical functionalization of thioglycosides in aqueous medium

A visible-light-mediated thiol-ene reaction is successfully operated in aqueous medium. An organic photoredox catalyst (9-mesityl-10-methylacridinum tetrafluoroborate) is used to initiate the radical process to generate thiyl radicals upon light irradiation. Two reaction pathways were discovered in different aqueous buffer systems. A thiol-ene adduct is preferred in acidic reaction medium; while disulfide formation is found to be favored in basic reaction medium. The photocatalytic method is demonstrated to be applicable on unprotected peptides.

Organic Photoredox Catalysts Exhibiting Long Excited-State Lifetimes

AbstractOrganic photoredox catalysts with a long excited-state lifetime have emerged as promising alternatives to transition-metal-complex photocatalysts. This paper explains the effectiveness of using long-lifetime photoredox catalysts for organic transformations, focusing on the structures and photophysics that enable long excited-state lifetimes. The electrochemical potentials of the reported organic, long-lifetime photocatalysts are compiled and compared with those of the representative Ir(III)- and Ru(II)-based catalysts. This paper closes by providing recent demonstrations of the synthetic utility of the organic catalysts.1 Introduction2 Molecular Structure and Photophysics3 Photoredox Catalysis Performance4 Catalysis Mediated by Long-Lifetime Organic Photocatalysts4.1 Photoredox Catalytic Generation of a Radical Species and its Addition to Alkenes4.2 Photoredox Catalytic Generation of a Radical Species and its Addition to Arenes4.3 Photoredox Catalytic Generation of a Radical Species and its Addition to Imines4.4 Photoredox Catalytic Generation of a Radical Species and its Addition to Substrates Having C≡X Bonds (X=C, N)4.5 Photoredox Catalytic Generation of a Radical Species and its Bond Formation with Transition Metals4.6 Miscellaneous Reactions of Radical Species Generated by Photoredox Catalysis5 Conclusions

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles.

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Photophysical and Electrochemical Properties of Pyrimidopteridine‐Based Organic Photoredox Catalysts

AbstractHerein we describe the synthesis and photophysical and electrochemical characterization of pyrimidopteridine‐based photoredox catalysts. The pyrimidopteridines can be obtained from the corresponding N‐oxides through photo‐mediated oxygen atom transfer to a sacrificial acceptor molecule on gramscale. The presence of a triplet excited state was evidenced by means of transient absorption spectroscopy. Pyrimidopteridines are potent excited state oxidants with excited state reduction potentials exceeding +2.10 V vs. SCE in MeCN. The catalytic activity is illustrated in the photo‐mediated oxidative annulation of 2‐phenylbenzoic acid.

Synthesis of Benzo-Fused Cyclic Ketones via Metal-Free Ring Expansion of Cyclopropanols Enabled by Proton-Coupled Electron Transfer.

The metal-free ring expansion of cyclopropanols containing a pendant styrene moiety was successfully achieved using a proton-coupled electron transfer enabled by an organic photoredox catalyst. Through this, variants of 1-tetralone and 1-benzosuberone bearing a substituent at the benzylic position were selectively obtained through the regioselective ring closure of alkyl radical intermediates depending on the substitution pattern of the alkene moiety.

Photocatalytic Approach for Construction of 5,6-Dihydroimidazo[2,1-a]isoquinolines and Their Luminescent Properties.

A visible-light-driven photoredox reaction of tetrahydroisoquinoline with 2H-azirines is described. 4,7-Bis(4-methoxyphenyl)benzo[c][1,2,5]thiadiazole, a benzothiadiazole (BTD) derived fluorophore, is used as an organic photoredox catalyst, and the reaction offers an efficient access to 5,6-dihydroimidazo[2,1-a]isoquinolines with a broad range of functional groups. The resulting 5,6-dihydroimidazo[2,1-a]isoquinolines present strong photoluminecence in solutions and powders and could be applied in the fabrication of blue OLED devices.

Radical Addition to N,N-Diaryl Dihydrophenazine Photoredox Catalysts and Implications in Photoinduced Organocatalyzed Atom Transfer Radical Polymerization.

Photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) is a controlled radical polymerization methodology catalyzed by organic photoredox catalysts (PCs). In an efficient O-ATRP system, good control over molecular weight with an initiator efficiency (I* = M n,theo/M n,exp × 100%) near unity is achieved, and the synthesized polymers possess a low dispersity (Đ). N,N-Diaryl dihydrophenazine catalysts typically produce polymers with low dispersity (Đ < 1.3) but with less than unity molecular weight control (I* ~ 60-80%). This work explores the termination reactions that lead to decreased control over polymer molecular weight and identifies a reaction leading to radical addition to the phenazine core. This reaction can occur with radicals generated through reduction of the ATRP initiator or the polymer chain end. In addition to causing a decrease in I*, this reactivity modifies the properties of the PC, ultimately impacting polymerization control in O-ATRP. With this insight in mind, a new family of core-substituted N,N-diaryl dihydrophenazines is synthesized from commercially available ATRP initiators and employed in O-ATRP. These new core-substituted PCs improve both I* and Đ in the O-ATRP of MMA, while minimizing undesired side reactions during the polymerization. Further, the ability of one core-substituted PC to operate at low catalyst loadings is demonstrated, with minimal loss of polymerization control down to 100 ppm (weight average molecular weight [M w] = 10.8 kDa, Đ = 1.17, I* = 104% vs M w = 8.26, Đ = 1.10, I* = 107% at 1000 ppm) and signs of a controlled polymerization down to 10 ppm of the catalyst (M w = 12.1 kDa, Đ = 1.36, I* = 107%).

Pyrimidopteridine-Catalyzed Hydroamination of Stilbenes with Primary Amines: A Dual Photoredox and Hydrogen Atom Transfer Catalyst

The applicability of a heteroaromatic photoredox catalyst in an additive-free photo-mediated hydroamination of stilbenes is described. Initiated by the excitation of a highly potent organic pyrimidopteridine photoredox catalyst (E*[PrPPT*/PrPPT·–] = +2.10 V vs SCE in MeCN), the photo-mediated hydroamination of stilbenes was enabled using unprotected, primary aliphatic, allylic, benzylic amines for the synthesis of various α-phenyl phenethylamine derivatives. Notably, the stereogenic center of α-chiral amines was fully preserved. Both starting materials serve as competent quenching partners. Fluorescence- and competitive fluorescence-quenching experiments as well as electron paramagnetic resonance spectroscopic analysis and density functional theory calculations allowed a plausible reaction mechanism to be deduced.

Singlet and Triplet Contributions to the Excited-State Activities of Dihydrophenazine, Phenoxazine, and Phenothiazine Organocatalysts Used in Atom Transfer Radical Polymerization.

The photochemical dynamics of three classes of organic photoredox catalysts employed in organocatalyzed atom-transfer radical polymerization (O-ATRP) are studied using time-resolved optical transient absorption and fluorescence spectroscopy. The nine catalysts selected for study are examples of N-aryl and core-substituted dihydrophenazine, phenoxazine and phenothiazine compounds with varying propensities for control of polymerization outcomes. Excited singlet-state lifetimes extracted from the spectroscopic measurements are reported in N,N-dimethylformamide (DMF), dichloromethane (DCM), and toluene. Ultrafast (<200 fs to 3 ps) electronic relaxation of the photocatalysts after photoexcitation at near-UV wavelengths (318-390 nm) populates the first singlet excited state (S1). The S1-state lifetimes range from 130 ps to 40 ns with a considerable dependence on the photocatalyst structure and the solvent. The competition between ground electronic state recovery and intersystem crossing controls triplet state populations and is a minor pathway in the dihydrophenazine derivatives but is of greater importance for phenoxazine and phenothiazine catalysts. A comparison of our results with previously reported O-ATRP performances of the various photoredox catalysts shows that high triplet-state quantum yields are not a prerequisite for controlling polymer dispersity. For example, the photocatalyst 5,10-bis(4-cyanophenyl)-5,10-dihydrophenazine, shown previously to exert good polymerization control, possesses the shortest S1-state lifetime (135 ps in DMF and 180 ps in N,N-dimethylacetamide) among the nine examples reported here and a negligible triplet-state quantum yield. The results call for a re-evaluation of the excited-state properties of most significance in governing the photocatalytic behavior of organic photoredox catalysts in O-ATRP reactions.

Visible-Light Photocatalytic Tri- and Difluoroalkylation Cyclizations: Access to a Series of Indole[2,1-a]isoquinoline Derivatives in Continuous Flow.

A process for achieving photocatalyzed tri- and difluoromethylation/cyclizations for constructing a series of tri- or difluoromethylated indole[2,1-a]isoquinoline derivatives is described. This protocol utilized an inexpensive organic photoredox catalyst and provided good yields. Moreover, the combination of continuous flow and photochemistry, designed to provide researchers with a unique green process, was also shown to be key to allowing the reaction to proceed (product yield of 83% in flow vs 0% in batch).