Organic Nanofibers Research Articles

Enhanced photocatalytic hydrogen production via water splitting using cobalt-based organic nanofibers under visible light irradiation.

This study focuses on the development of cobalt-based organic nanofibers as efficient photocatalysts for hydrogen production via water splitting under visible light irradiation. The depletion of fossil fuels necessitates the exploration of alternative energy sources, with hydrogen emerging as a promising candidate due to its clean and renewable nature. While conventional photocatalysts have shown potential, their limited activity under visible light and fast electron-hole recombination hinder their efficiency. In this work, cobalt acetate/poly(vinyl alcohol) (CoAc/PVA) nanofibers were electrospun and treated in a novel reactor design under water gas atmosphere at 160 °C to produce continuous, smooth, and stable nanobelts. The nanofibers displayed a band gap energy of 2.29 eV, indicating strong absorption in the visible light range. Detailed characterization using FTIR, XPS, SEM, and TGA confirmed the formation of organic-inorganic hybrid nanofibers with uniform cobalt distribution. Hydrogen production experiments showed that the proposed nanofibers significantly outperformed Co3O4 nanofibers, with an optimal hydrogen generation rate of 3.266 mmol gcat -1 s-1 at 70 vol% methanol. Furthermore, the treated nanofibers demonstrated good stability over multiple cycles, maintaining a constant hydrogen production rate after the third run. The study highlights the advantages of cobalt-based organic nanofibers in overcoming the limitations of traditional photocatalysts, providing a novel route for sustainable hydrogen production.

Preparation of Dysprosium(III)-Metal Organic Framework Nanofiber for Exosome Capture and Biomarker Discovery toward Liver Disease.

As an emerging source for liquid biopsy, exosomes hold significant promise for clinical diagnosis. However, commonly used exosome isolation methods (e.g., ultracentrifugation) suffer from low throughput for a large number of clinical samples. Herein, a dysprosium-metal organic framework was synthesized and doped with nanofibers by electrospinning for efficient capture of exosomes from body fluid. With the integration of multichannel of pipet or robot automatic workstation, high throughput exosome isolation can be achieved with clinical samples with high reproducibility. To evaluate the clinical value of the developed method, urinary exosomes were enriched from 34 liver disease samples of different stages for the profiling of metabolites by mass spectrometry. The results showed that HCC, cirrhosis, and healthy controls can be significantly differentiated by the Random Forest classification model. The dysprosium-metal organic framework has promising applications in exosome-based liquid biopsy for large-scale clinical disease diagnosis.

Lanternarene-Based Self-Sorting Double-Network Hydrogels for Flexible Strain Sensors.

Conductive flexible hydrogels have attracted immense attentions recently due to their wide applications in wearable sensors. However, the poor mechanical properties of most conductive polymer limit their utilizations. Herein, a double network hydrogel is fabricated via a self-sorting process with cationic polyacrylamide as the first flexible network and the lantern[33]arene-based hydrogen organic framework nanofibers as the second rigid network. This hydrogel is endowed with good conductivity (0.25 S m-1) and mechanical properties, such as large Young's modulus (31.9MPa), fracture elongation (487%) and toughness (6.97MJ m-3). The stretchability of this hydrogel is greatly improved after the kirigami cutting, which makes it can be used as flexible strain sensor for monitoring human motions, such as bending of fingers, wrist and elbows. This study not only provides a valuable strategy for the construction of double network hydrogels by lanternarene, but also expands the application of the macrocycle hydrogels to flexible electronics.

Poly(3-Hexylthiophene) Based Bioelectronic Interface Using Conducting Nanofibers (CNFs) for the Sensitive Determination of Folate Receptor Cancer Biomarkers in Human Plasma

Folate receptors (FRs) are important biomarkers that can indicate the presence of various cancers. Sensitive and accurate detection of FRs is crucial for early cancer diagnosis and treatment. The current methods of FRs detection have high cost, potential cytotoxicity, and complex production by relying on metallic nanomaterials, or have low electrical conductivity and sensitivity such as biopolymers. To address these challenges, a new approach using conducting nanofibers (CNFs) as bioelectronic surface was developed. A composite of sodium alginate (SA), a bio-friendly polymer, poly-ethylene oxide (PEO), an antifouling polymer, and poly(3-hexylthiophene) (P3HT), a semi-conducting organic polymer nanofiber was synthesized, with folic acid conjugated to the CNFs as a biorecognition element to target (FRs). The electrochemical and electrical properties were evaluated through cyclic voltammetry and electrochemical impedance spectroscopy in a solution containing both a redox marker and free redox species. The CNFs exhibit electroactivity in buffer solution without a redox marker, owing to the electronic properties of the P3HT of EIS readout. The obtained biosensor significantly improved sensitivity, enabling the detection of FRs with a limit of detection (LOD) of 0.12 pM in human plasma, the high sensitivity compared to all previous approaches and a 25-fold improvement compared to the sensor described in our previous study, with improved selectivity. Additionally, the results showed a good biocompatibility toward MCF-7 breast cancer cells, which opens the way for their use as theragnostic nanoprobes for cancer cells diagnosis and therapy. This study provided a simple, low cost and sensitive analytical approach for folate receptor detection.

Bio-inspired fabrication of chitosan/PEO/Ti3C2Tx 2D MXene nanosheets supported palladium composite nanofiber catalysts via electrospinning

In this study, novel chitosan/polyethylene oxide/Ti3C2Tx 2D MXene nanosheets (CS/PEO/Ti3C2Tx) nanofibers were successfully prepared by a continuous electrospinning process. During the electrospinning process, induced by the syringe tip capillary effects and electric field force, the Ti3C2Tx nanosheets were aligned along the direction of the nanofiber formation to occur a highly oriented structure. This well-ordered arrangement of the inorganic Ti3C2Tx nanosheets within the organic polymer matrix nanofiber was similar with nacre-like ‘brick-and-motar’ structure to some extent, resulting in a marked increase in thermal stability and mechanical properties of the resultant CS/PEO/Ti3C2Tx nanofiber. As 4 wt% of Ti3C2Tx nanosheets loaded, the highest tensile strength of the CS/PEO/Ti3C2Tx nanofiber mats was achieved as 31.7 MPa, about two times that of neat CS/PEO nanofibers. Uniformly dispersed Pd nanoparticles in size of about 1.6 nm have been successfully immobilized on the composite nanofiber with a solution impregnation process. With a loading as low as 0.2 mol% of Pd, the resultant Pd@CS/PEO/Ti3C2Tx composite nanofiber catalysts were highly active for both Heck and Sonogashira coupling reactions with broad reactants application scope, and could be recycled 15 runs without significant loss of activities.

Robust Multifunctional Ultrathin 2 Nanometer Organic Nanofibers.

Ultrathin organic nanofibers (UTONFs) represent an emerging class of nanomaterials as they carry a set of favorable attributes, including ultrahigh specific surface area, lightweight, and mechanical flexibility, over inorganic counterparts, for use in biomedicine and nanotechnology. However, precise synthesis of uniform UTONFs (diameter ≤ 2 nm) with tailored functionalities remained challenging. Herein, we report robust multifunctional UTONFs using hydrophobic interaction-driven self-assembly of amphiphilic alternating peptoids containing hydrophobic photoresponsive azobenzene and hydrophilic hydroxyl moieties periodically arranged along the peptoid backbone. Notably, the as-crafted UTONFs are approximately 2 nm in diameter and tens of micrometers in length (an aspect ratio, AR, of ∼10000), exemplifying the UTONFs with the smallest diameter yielded via self-assembly. Intriguingly, UTONFs were disassembled into short-segmented nanofibers and controllably reassembled into UTONFs, resembling "step-growth polymerization". Photoisomerization of azobenzene moieties leads to reversible transformation between UTONFs and spherical micelles. Such meticulously engineered UTONFs demonstrate potential for catalysis, bioimaging, and antibacterial therapeutics. Our study highlights the significance of the rational design of amphiphiles containing alternating hydrophobic and hydrophilic moieties in constructing otherwise unattainable extremely thin UTONFs with ultrahigh AR and stimuli-responsive functionalities for energy and bionanotechnology.

Microfluidic-blow-spinning of carvacrol-loaded porphyrin metal − organic framework nanofiber films with synergistic antibacterial capabilities for food packaging

The adherence of foodborne microorganisms threatens human health, necessitating the development of antibacterial food packaging films. In this study, the antibacterial agent carvacrol (CV), hindered by its high volatility and intense aromatic odor, was encapsulated within the photosensitive metal-organic frameworks (MOFs) material PCN-224 (loading rate 50%). Subsequently, the microfluidic-blow-spinning (MBS) technique was employed for the rapid fabrication of CV@PCN-224/polycaprolactone (PCL)/chitosan (CS) nanofiber films. The incorporation of CV@PCN-224 NPs enhances the nanofiber films' thermal stability and mechanical properties and improves the water vapor permeability while maintaining the sustained release of CV over an extended period and good biocompatibility. Due to the simultaneous loading of antibacterial agent (CV) and photosensitive agent (PCN-224), the CV@PCN-224/PCL/CS films exhibited good synergistic antibacterial functionality, as demonstrated by effective inhibition against both E. coli and S. aureus. All results show the vast potential of the prepared nanofiber films in antibacterial food packaging.

Lightweight, Elastic, and Superhydrophobic Multifunctional Organic-Inorganic Fibrous Aerogels for Efficient Oily Wastewater Purification and Electromagnetic Microwave Absorption.

Lightweight and robust aerogels with multifunctionality are highly desirable to meet the technological demands of current society. Herein, we designed lightweight, elastic, and superhydrophobic multifunctional organic-inorganic fibrous hybrid aerogels which were assembled with organic aramid nanofibers and inorganic hierarchical porous carbon fibers. Thanks to the organic-inorganic fiber hybridization strategy, the optimal aerogels possessed remarkable compressibility and elasticity. Benefiting from the microscopic hierarchical porous structure of carbon fibers and the macroscopic macroporous lamellar structure of aerogels, the optimal aerogels exhibited superb lightweight property, conspicuous electromagnetic microwave absorption ability, and outstanding oily wastewater purification capacity. As for electromagnetic microwave absorption, it achieved a strong reflection loss of -41.8 dB, and the effective absorption bandwidth reached 6.86 GHz. Besides, the oil adsorption capacity for trichloromethane reached as high as 93.167 g g-1 with a capacity retention of 95.6% after 5 cycles. Meanwhile, it could act as a gravity-driven separation membrane to continuously separate trichloromethane from a trichloromethane-water mixture with a high flux of 7867.37 L·m-2·h-1, even for surfactant-stabilized water-in-n-heptane emulsions of 3794.94 L·m-2·h-1. Such a strategy might shed some light on the construction of multifunctional aerogels toward broader applications.

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel.

The Applications of silica aerogel are limited due to its brittleness and low strength. As a result, it is essential to strengthen and toughen it. Organic nanofibers are one of the preferred reinforcement materials. In this work, we designed and fabricated flexible and compressible nanostructure-assembled aramid nanofiber/silica composites aerogel (ANF/SiO2 aerogel) to improve the mechanical strength and flexibility of silica aerogel without compromising thermal insulation properties. The aramid nanofiber/silica composite aerogels were prepared by immersing the aramid nanofiber wet gel into the silica sol for a certain period of time followed by freeze drying without solvent replacement. The surface modifier 3-aminopropyltriethoxysilane (APTES) was used as a coupling agent to form chemical linkage between the ANF fiber and silica gel. It was observed that APTES can effectively drive the silica sol to infuse into ANF hydrogel, promoting the assembly of silica gel onto the fiber surface and a uniform distribution in the network of ANF. The compressive resilience, thermal stability, and thermal insulation properties of the composite aerogels were evaluated by inducing the silica aerogel into the ANF network to form a protective layer on the fiber and change the pore structure in the ANF network.

The Preparation and Performance Study of Polyamide Film Based on PDA@MWCNTs/PVDF Porous Support Layer.

It is urgent to develop a polyamide (PA) thin-film composite (TFC) membrane with a new method in this study by designing and constructing a new nanomaterial support layer instead of the conventional support layer. Polydopamine-wrapped single-walled carbon nanotubes (PDA@MWCNTs) as the place of the polymerization reaction can optimize the PA film structure and performance. The resulting composite membrane presents a higher water flux of 15.8 L·m-2·h-1·bar-1 and a rejection rate of 97% to Na2SO4, simultaneously maintaining this high separation performance in 300 min. It is a new ideal to construct novel support layer by using inorganic nanoparticles and organic polymer nanofiber membranes.

Investigation of Polylactic Acid Nanofibers as Enhanced Plant Growth Medium by Improved Melt-Blowing Method

An improved melt-blowing method have developed to manufacture the organic nonwoven nanofibers through our previous study. As a parallel phase, this study explores the potential of polylactic acid (PLA) nanofibers as a plant growth substrate, emphasizing the unique properties and performance when mixed with pellets. Preliminary experiments comparing different fiber materials, cultivated crops, and fiber diameters demonstrate the favorable characteristics of PLA, such as wettability and growth promotion. Comparative experiment with rockwool, a commonly used medium, shows that PLA nanofibers exhibit superior growth performance. On the other hand, a solidified PLA medium is produced and tested. Hydroponic tests using solidified medium configurations with varying fiber diameters and soil conditioners further confirm the benefits of PLA as a medium for plant growth. The findings suggest that PLA nanofibers have the potential to revolutionize cultivation practices, providing sustainable and environmentally friendly alternatives to traditional substrates.

Nanofibrous Porous Organic Polymers and Their Derivatives: From Synthesis to Applications.

Engineering porous organic polymers (POPs) into 1D morphology holds significant promise for diverse applications due to their exceptional processability and increased surface contact for enhanced interactions with guest molecules. This article reviews the latest developments in nanofibrous POPs and their derivatives, encompassing porous organic polymer nanofibers, their composites, and POPs-derived carbon nanofibers. The review delves into the design and fabrication strategies, elucidates the formation mechanisms, explores their functional attributes, and highlights promising applications. The first section systematically outlines two primary fabrication approaches of nanofibrous POPs, i.e., direct bulk synthesis and electrospinning technology. Both routes are discussed and compared in terms of template utilization and post-treatments. Next, performance of nanofibrous POPs and their derivatives are reviewed for applications including water treatment, water/oil separation, gas adsorption, energy storage, heterogeneous catalysis, microwave absorption, and biomedical systems. Finally, highlighting existent challenges and offering future prospects of nanofibrous POPs and their derivatives are concluded.

Facile synthesis of sub-10 nm Cu-MOF nanofibers as electrochemical sensor element for picomolar chloramphenicol detection

Precise detection of antibiotics in aquatic environments is significant for human health and ecological environment development due to the excessive use of antibiotics. However, the accurate detection of ultralow-level antibiotics, such as picomolar level, has always been an extremely challenging task. Herein, we synthesized the sub-10 nm copper-based metal–organic framework nanofibers (Cu-MOF NFs) with a large specific area and high conductivity for achieving the electrochemical detection of picomolar-level chloramphenicol (CAP) in real water samples. As a result, by optimization of synthesis time and detection conditions, Cu-MOF NFs with a diameter of about 5 nm exhibited the ultralow limit of detection with 0.03 pM and wide detection range with 0.1––1.0 × 106 pM for CAP detection, as well as the designed sensor electrode has the excellent specificity, reproducibility, and stability. Importantly, the prepared sensor electrode exhibits reliable analytical results for CAP in real water samples, such as tap water, bottled water, and milk, indicating that designed sensor electrode has great application potential for the precise detection of antibiotics in practical samples.

Thin-film solid-phase microextraction of pesticides from cereal samples using electrospun polyvinyl alcohol/modified chitosan/porous organic framework nanofibers

In this study, a coating of electrospun polyvinyl alcohol/modified chitosan/hydroxy-containing porous organic framework (PVA/MCS/HC-POF) was fabricated and applied as a novel sorbent for thin-film solid-phase microextraction of pesticides from cereal samples, followed by HPLC-UV. The successful fabrication of PVA/MCS/HC-POF was confirmed through characterization tests. The functional group of MCS and a large number of hydroxyl groups on the HC-POF structure contributed to the co-extraction of pesticides. Under the optimum conditions, the calibration plots were linear within the range of 5.0–800 ng mL−1 (r2 ≥ 0.978), and the limits of detection were obtained below 4.0 ng mL−1. The method's precision was investigated through intra-day, inter-day, and film-to-film RSD (%) measurements, all of which were less than 6.5 %, 8.2 %, and 10.0 %, respectively. Furthermore, satisfactory recoveries ranging from 63.3 % to 79.0 % were obtained. Accordingly, the proposed method can be considered a suitable alternative for measuring trace amounts of pesticides in cereal samples.

PVDF/ZnO piezoelectric nanofibers designed for monitoring of internal micro-pressure.

Organic piezoelectric materials are emerging as integral components in the development of advanced implantable self-powered sensors for the next generation. Despite their promising applications, a key limitation lies in their reduced mechanical force-to-electricity conversion efficiency. In this study, we present a breakthrough in the fabrication of soft poly(vinylidene fluoride) (PVDF) organic electrospun piezoelectric nanofibers (OEPNs) with exceptional piezoelectric performance achieved through the incorporation of zinc oxide nanorods (ZnO NR). The inclusion of ZnO NR proved instrumental in augmenting the nanocrystallization of PVDF organic electrospun piezoelectric nanofibers (OEPNs), leading to a highly efficient crystal phase transformation from the α phase to the β/γ phase, serving as superior piezoelectric working dipoles. The resulting PVDF/ZnO NR OEPNs exhibited unparalleled piezoelectric output voltage and current density, particularly noteworthy under a micro-pressure of 1 kPa and a low frequency of 1.5 Hz. Utilizing the obtained PVDF/ZnO NR OEPNs as the piezoelectric working element, we engineered a soft self-powered micro-pressure sensor. This sensor was implanted simultaneously on the cardiovascular walls of the heart and femoral artery in pigs. The sensor demonstrated precise monitoring and recording capabilities for micro-pressure changes during various physiological states, spanning from wakefulness to coma, euthanasia, and notably, the formation of cardiac thrombus. These findings underscore the immense potential of the implantable self-powered sensor for the assessment and diagnosis of pressure-related cardiovascular diseases, such as thrombus and atherosclerosis, during the postoperative recovery phase. This innovative technology offers valuable insights into the dynamic physiological states, paving the way for enhanced postoperative care and management of cardiovascular conditions.

Short Review about Challenges and Advanced Solutions of Higher Performance Piezoelectric Nanofibers Mats

Piezoelectric nanofibers mats have been received an incremented interest in both research and commercial products for wide energy harvesting applications. Such nanofibers, with diameters less than one micron, can convert the mechanical excitations into electric signals with an improved efficiency according to formed internal electric dipoles along with higher surface-to-volume ratio, compared to bulky polymeric piezo-films. This paper introduces a brief review about the main challenges of piezoelectric nanofibers mats from different aspects including materials and processes. Then, the paper briefly discusses some recent solutions to overcome the challenges facing the piezoelectric polymeric nanofibers through materials additives and processes enhancement which can develop the piezosensitivity of the organic nanofibers.

Ln-HOF Nanofiber Organogels with Time-Resolved Luminescence for Programmable and Reliable Encryption.

Developing tunable luminescent materials for high throughput information storage is highly desired following the explosive growth of global data. Although considerable success has been achieved, achieving programmable information encryption remains challenging due to current signal crosstalk problems. Here, we developed long-lived room-temperature phosphorescent organogels enabled by lanthanum-coordinated hydrogen-bonded organic framework nanofibers for time-resolved information programming. Via modulating coassembled lanthanum concentration and Förster resonance energy transfer efficiency, the lifetimes are prolonged and facilely manipulated (20-644 ms), realizing encoding space enlargement and multichannel data outputs. The aggregated strong interfacial supramolecular bonding endows organogels with excellent mechanical toughness (36.16 MJ m-2) and self-healing properties (95.7%), synergistically achieving photostability (97.6% lifetime retention in 10000 fatigue cycles) via suppressing nonradiative decays. This work presents a lifetime-gated information programmable strategy via lanthanum-coordination regulation that promisingly breaks through limitations of current responsive luminescent materials, opening unprecedented avenues for high-level information encryption and protection.

Synthesis of metal–organic nanofiber/rGO nanocomposite as the sensing element for electrochemical determination of hypoxanthine

Abstract In this study, metal–organic nanofibers (MONFs) and reduced graphite oxide (rGO) nanocomposite were used to modify the surface of glassy carbon electrode, and the electrochemical sensor was applied to the differential pulse voltammetry determination of hypoxanthine, the oxidation intermediate of human purine degradation metabolism. The preparation of MONFs/rGO nanocomposite is simple, efficient, and environmentally friendly. The morphology and structure of MONFs/rGO nanocomposite were characterized by field emission scanning electron microscopy and X-ray diffraction. The results show that the improved sensor has a significant increase in current density, with linear ranges of 0.1–10 and 20–100 μM. Detection limit 0.01 μM (S/N = 3). Under the optimized conditions, the improved sensor shows very good stability, selectivity, and improved accuracy.

A critical review of MXene/nanocellulose composite films

MXene/nanocellulose composite films have received special attention by combining the characteristics of emerging two-dimensional (2D) inorganic nanosheets and one-dimensional (1D) organic nanofibers. In recent years, the research progress of MXene/nanocellulose composite films has been rapid, with good performance and application prospects. Herein, we criticize the developments of MXene/nanocellulose composite films. Firstly, the synthesis methods of MXene/nanocellulose composite films are reviewed. Secondly, their various applications are summarized, including electromagnetic interference shielding, sensor, energy, environmental field. The interaction mechanism between 2D inorganic MXene and 1D organic nanocellulose has received special attention. In addition, the current challenges and development directions potential for MXene/nanocellulose films were also proposed. It is expected that there will be rapid development of MXene/nanocellulose composite films.

Hierarchical covalent organic framework hollow nanofibers-bonded stainless steel fiber for efficient solid phase microextraction

The solid phase microextraction (SPME) technique has been widely applied in the detection of trace compounds in food, environment, and medicine due to its advantages of easy quantification, simple operation, and greenness. Herein, a templating strategy with SiO2 nanofibers (SiO2 NFs) is reported to synthesize hierarchical covalent organic framework hollow nanofibers (COF HNFs)-coated stainless steel fiber for SPME application with dramatically enhanced enrichment performance for trace analytes. The construction of hierarchical porosity inside the microextraction coatings can not only increase the specific surface area of COF extraction materials for obtaining more abundant adsorption sites but also greatly improve the accessibility of internal COF micropores. Moreover, the thicknesses of the microextraction COF coatings can be facilely tailored by adjusting the amount of SiO2 NFs pre-assembled on the SPME fibers. On the headspace solid phase microextraction (HS-SPME) of antimicrobial residues, the developed COF TpBD-Me2 HNFs-12 fibers achieve enrichment factors of 2026 and 1823 for thymol and carvacrol respectively, which are significantly higher than those obtained from the counterpart COF TpBD-Me2-bonded fiber (8.5–8.2 times) and commercial CAR/PDMS fiber (3.3–4.4 times). Furthermore, the developed method was demonstrated to have wide linearity (0.1–50 μg L-1), low limits of detection (0.010 μg L-1), good thermal stability and excellent reusability (>60 recycles), demonstrating great application potential in the extraction of trace organic pollutants. The strategy developed in this work is applicable to preparing a variety of topological COF (e.g., TpBD, TpPa-1) HNFs-bonded fibers.