Organic Matter Content Research Articles

Spatial Variability of Micronutrient Status in Miyawaki Forest Development

Aim: This study aims to quantitatively analyze the spatial variability in the micronutrient status of soil by conducting a comparative assessment of soil samples from Miyawaki forest and adjacent barren land. By focusing on key parameters such as soil pH, organic matter content and micronutrient levels, the changes brought by the Miyawaki method of afforestation is being studied. Study Design: Soil samples were collected from the first Miyawaki forest established in Kerala and a comparative study was done with neighbouring undisturbed plot to analyse the changes that was brought about by the establishment of Miyawaki forest in the area. Place and Duration of Study: The Miyawaki forests selected for study was located in Puliyarakonam in Thiruvananthapuram district of Kerala, India. Methods: Representative soil samples were collected from the Miyawaki forest lands and neighbouring undisturbed plot from two depths and was subjected to various analyses. Results: The various soil chemical parameters were found to be enhanced by this method of afforestation indicating an improved soil fertility and soil health. Conclusion: The study highlights the significant benefits of Miyawaki forest restoration techniques on soil properties, which have far-reaching implications for both soil health and biodiversity. A higher OM (4.13%), available micronutrients (B-0.83 mg kg-1, Fe- 39.65 mg kg-1, Mn-30.53 mg kg-1, Zn-12.44 mg kg-1, Cu-8.90 mg kg-1) and pH (5.35) was observed in the Miyawaki forest in the surface soil. It was found that while the pH increased in the subsurface soil all the micronutrient concentration decreased with depth.

Environmental Impact Assessment of Solid Waste Disposal on Groundwater Quality

<p class="CxSpFirst" style="text-align:justify;"><span style="font-family:"Times New Roman","serif";font-size:12.0pt;line-height:150%;text-autospace:none;">This study focuses on the impact of solid waste on groundwater quality in the region of Ramayanpatti, Tirunelveli. Tirunelveli city generates 100 tonnes of solid waste in a day. Solid waste has organic matter, inorganic matter, and moisture content which leaches dissolved organic matter, and heavy metals to the groundwater. Rainfall runoff carries all the dissolved contaminants from the solid waste and infiltrates into the groundwater. Groundwater quality is characterized at 30 locations around the dumping yard. Water Quality Index (WQI) is calculated using important characteristics such as pH, TDS, Calcium, Magnesium, Alkalinity, Sodium, Potassium, Chloride, Nitrate, and Sulphate by its relative weightage. The Spatial distribution of WQI is drawn.  Groundwater Quality is very poor in the surrounding region of solid waste dump yard and also in the areas of agriculture irrigated areas. Groundwater in other areas shall be used for domestic purposes except drinking with proper disinfection.</span></p><p class="CxSpMiddle" style="text-align:justify;"><span style="font-family:"Times New Roman","serif";font-size:12.0pt;line-height:150%;text-autospace:none;"><strong>Keywords:</strong> Solid waste, Groundwater Quality, Characterization, Water Quality Index, Groundwater use</span></p>

Variability of Soil Aggregate Disintegration During Splash Erosion Under Different Circumstances

ABSTRACTThe duration of rainfall is a significant factor in the process of splash erosion. Nevertheless, there is a lack of comprehensive documentation regarding the extent and characteristic of soil aggregate disintegration resulting from raindrop impact during splash erosion. To examine the properties of the aggregate disintegration mechanism during various of splash erosion, three soil samples (S‐1, S‐2, and S‐3 labeled as the organic matter was 19.77, 31.70, and 26.83 g kg−1) were employed to simulated splash erosion under six durations of rainfall (5, 10, 15, 20, 30, and 40 min). Aggregates ranging in size from 1 to 5 mm were utilized in the preparation of test soils for different antecedent moisture contents (3%, 5%, 10%, and 15%). The result demonstrated that the slaking effect, as observed in the fast wetting of the Le Bissonnais method, is attributed to the sudden release of air entering the water, irrespective of the water immersion duration. Upon increasing moisture content, under fast wetting conditions, the mean weight diameter (MWD) values for S‐2 and S‐3 samples increased from 1.25 and 1.31 to 1.85 and 1.61, respectively. Subsequently, at a moisture content of 10%, the MWD decreased to 1.84 and 1.49 for S‐2 and S‐3 samples, respectively. In contrast, S‐1 sample exhibited an increasing trend from 0.34 to 0.93. The sensitivity of aggregates to disintegration from slaking (RSI) decreased by 0.58, 0.43, and 0.29, while mechanical impact (RMI) decreased by 0.23, 0.11, and 0.08 with increasing moisture content, respectively. The rate of splash erosion for the S‐1 sample exhibited an initial increase followed by a subsequent decrease as the duration of rainfall increased. The S‐1 sample, with the lowest organic matter content, exhibited the highest content of microaggregate content (< 0.25 mm) of splashed particles (referring to soil particles transported out of the splash area by raindrops), ranging from 31.62% to 65.57%. The content of macroaggregate (> 0.25 mm) in the residual soil (indicating soil particles that were left in the area affected by splashing) exhibited a gradual reduction as the duration of rainfall increased. As the soil reached saturation, the influence of physicochemical dispersion became more pronounced with the prolonged duration of rainfall. The forces of slaking and physicochemical dispersion predominantly disrupted > 1 mm aggregates, while the destruction of aggregates within the 0.25–1 mm range was insufficient. This study is valuable for understanding the splash erosion process and provides a scientific foundation for the improvement of soil erosion prediction models.

Changes in Soil Physicochemical Properties and Fungal Communities Following a Forest Fire in the Pine Forest of Uljin, Republic of Korea

Soil samples from the rhizosphere of pine (Pinus densiflora) stands in the fire-disturbed Uljin forest were collected to analyze their physicochemical properties and fungal communities. In the burned area, soil pH decreased by 0.56, and organic matter content decreased by 0.32%p compared to the undisturbed area. Fungal community analysis revealed that all alpha diversity indices decreased in the burned area, but there were no differences according to fire severity. Soil pH, available phosphorus, and total nitrogen showed a positive correlation with the alpha diversity. Additionally, beta diversity analysis also indicated significant differences in the fungal communities between the burned area and the control sites (p value = 0.031). The changes in fungal communities were considered to be influenced by the decline in the order Atheliales, genus Russula, and genus Trechispora. A prediction analysis of the functional traits of fungi showed that the number of fungi involved in nutrient absorption and decomposition decreased in the burned area. It seems that the soil restoration of pine forests is progressing very slowly, as the soil fungi related to nutrient absorption by pine trees have not recovered even 18 months after the forest fire. Therefore, it is necessary to monitor continuous fungal communities in pine forest restoration after a forest fire to determine forest ecosystem restoration success and stabilization.

Sugarcane bagasse derived biochar potential to improve soil structure and water availability in texturally different soils

Low organic matter content is one of the main constraints in arid and semiarid regions. This constraint and its negative influences on soils and plant growth may be alleviated by biochar (BC). Furthermore, improving soil physical and hydraulic attributes by application of biochar has received increased attention. Therefore, in the present study, the effects of sugarcane bagasse-derived biochar on the structural stability, water availability, and pore-size distribution (PSD) of three texturally different calcareous soils collected from different agro-climatologically regions were examined during a long-term experiment. Low and high-temperature biochars, produced in a muffle furnace by the traditional slow pyrolysis method at 300 °C (BC300) and 600 °C (BC600) were evaluated. Pots (15 kg) were filled with three different silty-clay Inceptisols (SCInc), silty-clay-loam Alfisols (SCLAlf), and loam Aridisols (LArid) soils mixed with 0 (control), 1, 2, and 3 w/w% of BC300 and BC600 during 540 days of incubation. The high energy moisture characteristic (HEMC) data was modeled using a modified van Genuchten function to quantify aggregate stability through stability ratio (SR) and structural stability index (SSI). The plant available water (PAW), least limiting water range (LLWR), and integral water capacity (IWC) were calculated with two matric suctions (h) of 330 cm for field capacity (FC) and 15,000 cm for permanent wilting point (PWP). Then the integral energy (EI) values were calculated (EIIWC). Results indicated that the incorporation of 3 w/w% biochar significantly (p < 0.01) increased SR (35 to 100%) and SSI (21 to 28%) indices in all three soils. Biochar significantly increased modal suction (MS) in LArid soils (5 to 158%); whereas, decreased MS of the other soils (3 to 43%). MS, SR, and SSI of BC300 and BC600-treated soils were not significantly different. PAW, LLWR, and IWC significantly decreased in the SCInc (18 to 61%, 8 to 44%, and 6 to 35%) and SCLAlf (8 to 44%, 18 to 35%, and 20 to 47%) soils and increased in LArid (4 to 54%, 3 to 61%, and 24 to 111%) soil with increasing biochar doses. There were no changes in EIIWC in biochar-treated LArid soil where PAW, LLWR, and IWC increased. Biochar increased EIIWC across the studied soil from 1% to 3.38 folds, thereby increasing the gradient of water potential to absorb the available water. Soil and soil-biochar mixtures exhibited heterogeneous and multimodal pore-size distribution (PSD). Biochar promoted the PSD peaks related to water-transmitting pores in SCInc and SCLAlf soils while decreased in LArid soil. In conclusion, results indicated that among the applied levels of biochar, the application of 3 w/w% biochar is suggested as a suitable way to improve soil physical behavior and structural stability.

Plant-Parasitic and Free-Living Nematode Community Associated with Oak Tree of Magoebaskloof Mountains, Limpopo Province, South Africa

A study was conducted in the mountains of Magoebaskloof, Limpopo Province, where oak trees grow along the banks of the Broederstroom River. This study revealed that 22 nematode genera were associated with oak trees (Quercus robur). The most frequently occurring nematodes were Aphelenchus sp. (100%) and Plectus sp. (100%), followed by Helicotylenchus sp. (90%). This study examined the relationship between nematodes and the physicochemical properties of the soil using Pearson correlation. It uncovered that the organic matter content (OMC) had a negative correlation with the number of Panagrolaimus sp. (r = −0.770) and Hemicycliophora sp. (r = −0.674). Conversely, the sand percentage positively correlated (r = 0.695) with the number of Hemicycliophora sp. The clay content of the soil showed a positive correlation (r = 0.617) with the number of Ditylenchus. Soil pH demonstrated a significant negative correlation with Acrobeloides sp. (r = −0.877). The canonical correspondence analysis (CCA) explained 63.3% of the relationship between nematodes and soil physicochemical properties. The CCA results indicated that Ditylenchus exhibited a positive correlation with OMC, while the Panagrolaimus and Hemicycliophora species showed a negative correlation with OMC. The results indicated that none of the soil sample sites were under stress. The soil food web analysis revealed that most soil samples were nutrient-enriched with a low C/N ratio. In conclusion, this study revealed that oak trees harbor a high diversity of plant-parasitic and free-living nematodes. The results suggest that soil nematodes, particularly free-living bacterivores, such as Panagrolaimus, can indicate organic matter content in the soil.

Biofilm growth Dynamics in a Micro-Irrigation with Reclaimed Wastewater in the Field scale.

The dripper clogging due to the development of biofilm can reduce the benefits of micro-irrigation technology implementation using reclaimed wastewater. The narrow cross-section and labyrinth geometry of the dripper channel enhance the fouling mechanisms. The aim of this study was to evaluate the water distribution and biofouling of drip irrigation systems at the field scale during irrigation with treated wastewater. Six 100 m lines of commercial pipes with two pressure-compensating dripper types (flow rate, Q, of 0.65 L.h-1 and 1.5 L.h-1, respectively) were monitored for four months. Different zones along the pipes were selected to evaluate the influence of hydrodynamical conditions (Reynolds number = 5400 to 0) on biofouling. Destructive methods involving the biofilm extraction by mechanical means, showed little biofilm development without significant differences in dry and organic matter content in function of the sampling location along the pipe or dripper flow rate (Q0.65 and Q1.5). These results were confirmed by non-destructive methods, such as optical coherence tomography, that nevertheless showed that biofouling concerned 15-20% of the total dripper labyrinth volume. Total organic carbon monitoring and its composition (by three-dimensional excitation and emission matrix fluorescence microscopy) showed that the biofilm did not significantly influence the organic matter nature. Our results indicated that the biological activity and biofilm development in irrigation systems were more affected by the environmental conditions, particularly water temperature, rather than flow conditions. This confirmed that treated wastewater with low organic content can be used in micro-irrigation systems without significant loss of efficiency, even in conditions requiring intensive irrigation, such as the Mediterranean climate.

Soil application potential of post-sorbents produced by co-sorption of humic substances and nutrients from sludge anaerobic digestion reject water

This study introduces a novel soil conditioning approach using humic substances (HSs) and nutrients co-recovered from reject water from sewage sludge anaerobic digestion. For the first time, HSs and nutrients were simultaneously recovered through sorption on low-cost, environmentally inert materials: natural rock opoka (OP) and waste autoclaved aerated concrete (WAAC). This innovative application of OP and WAAC as carriers and delivery agents for soil-relevant substances offers potential for resource recovery and soil conditioning. Results indicate that the post-sorption opoka (PS-OP) and post-sorption waste autoclaved aerated concrete (PS-WAAC) effectively release retained HSs at 350–480 μg g⁻1 d⁻1, respectively. These materials also show potential as NPK fertilizers, releasing 280–430 μg g⁻1 d⁻1 N-NH₄⁺, 80–150 μg g⁻1 d⁻1 P-PO₄³⁻, and 270–350 μg g⁻1 d⁻1 K⁺. Additionally, PS-OP demonstrated promising fungicide properties, reducing P. diachenii growth by 31% at a concentration of 1 g L⁻1. A two-way ANOVA indicated that the effects of PS-OP and PS-WAAC on soil physicochemical and biological parameters varied with plant species. Both post-sorbents improved the quality of soil collected from sand mining area, increasing cation exchange capacity by 7%–85% and organic matter content by 10%–58%. They also enhanced the functional potential of soil microbial communities, increasing their metabolic activities by 23%–36% in soils sown with clover and by 33%–39% in soils sown with rapeseed. An opposite effect was observed in soils sown with sorghum, suggesting these amendments may not universally act as plant biostimulants. The effectiveness of these post-sorbents in enhancing plant growth varied depending on plant species and the mineral base of the post-sorbent. PS-OP increased the total length of clover and sorghum by 41% and 36%, and their fresh biomass by 82% and 80%, respectively. In turn, PS-WAAC increased the total length of clover and sorghum by 76% and 17%, and their fresh biomass by 29% and 15%, respectively. It was notably more effective than PS-OP for rapeseed. This study proposes a strategy to decrease reliance on non-renewable resources and costly sorbents while minimizing environmental impact. It shows that PS-OP and PS-WAAC can enhance soil quality, microbial activity, and plant growth. Given their origins, these amendments are recommended for soil remediation, particularly in degraded areas. Future research should focus on optimizing their application across various plant species to maximize effectiveness.

Electrochemical activation of periodate with graphite electrodes for degradation of high concentrations of thiocyanogen (SCN−) in mineral processing tail liquid

Cyanide has been widely used in gold extraction due to its cost-effectiveness, high selectivity and recovery. Regrettably, its wide application also leads to the presence of a large amount of thiocyanogen (SCN−) in the tail liquid of mineral processing plants, which affects the quality of the effluent water, and thus poses a threat to the ecological environment and human health. This paper investigates the degradation of high concentration of SCN− in water using electrochemical oxidation/periodate (E-GP/PI) system. A degradation rate of 90.25 % of SCN− was achieved by optimising various operating parameters. The effects of organic matter and typical heavy metal ion concentrations on the degradation of SCN− were investigated, and it was found that Cu2+ was able to promote the degradation of SCN− through the formation of stable complexes with SCN−, which enhanced the degradation rate to 96.48 %. However, the presence of Octadecyltrimethylammonium bromide (OTAB) and butylxanthin hindered the degradation process, where 500 mg/L of OTAB reduced the degradation rate of SCN− to 80.88 %, while 100 mg/L of butylxanthin reduced the degradation rate to 78.66 %. On this basis, experiments were carried out using real wastewater samples and SCN− degradation efficiencies of about 90 % were obtained. Afterwards, through electron paramagnetic resonance analysis, free radical burst, ion chromatograph and other research techniques, IO3 and O2– were obtained as the main drivers of SCN− degradation and SCN− degradation pathways were elucidated. Finally, the E-GP/PI system was shown to be effective in reducing the ecotoxicity of SCN− by increasing the 24-h LC50 from 12.5 % to 48.5 % in a toxicity test with daphnia. This study provides a new idea for the green and efficient treatment of SCN− rich beneficiation tail liquid.

Effect of Black Soldier Fly Larvae Frass as Organic Fertilizer on Postharvest Quality and Shelf Life of Open-field-grown Tomato (Solanum lycopersicon L.)

Open-field-grown tomatoes in Saudi Arabia are stressed by poor soil fertility because of the low organic matter content, low nutrient availability, and high pH. Thus, high chemical fertilizer inputs are crucial for commercial production; however, they cause economic loss as well as negatively affect environmental sustainability. The use of efficient organic fertilizers would be useful for developing more cost-effective, environmentally friendly, and sustainable agriculture. The current study evaluated the impact of Black soldier fly (Hermetia illucens L.) frass (BSFF) fertilizer applications as organic fertilizer on postharvest fruit quality and shelf life of open-field-grown F1 hybrid ‘Sinag Tala’ tomatoes compared with those grown under control treatment (received recommended doses of chemical fertilizers for tomato production under open field conditions). The experiment was conducted using a randomized complete block design with four replicates. The results showed that the application of BSFF fertilizer, especially at the higher rate (5 ton/ha; BSFF3), improved the overall quality of tomato fruit. The BSFF fertilizer treatments reduced weight loss, maintained higher firmness, antioxidants [vitamin C, total phenol content (TPC) and total flavinoid (TFC)], total soluble solids (TSS), and titratable acidity (TA) contents, and lowered the TSS/TA ratio of fruits during shelf life compared with those of the control. The decay incidence was only detected after 9 days of shelf life and was significantly lower in all the BSFF fertilizer treatments (range, 8.40%-12.05%) than in the control (15.9%). In addition, BSFF fertilizer treatments reduced both disease incidence and severity of gray mold following pathogen inoculation during shelf life compared with those of the control. These results might be attributable to the higher antioxidants content (vitamin C, TPC, and TFC) and higher polyphenol oxidase activity in BSFF-fertilized tomatoes. In conclusion, BSFF fertilizer could be used as a potential eco-friendly alternative to chemical fertilizers to improve tomato fruit quality during shelf life.

Paleo-ecological quality status induced by natural and anthropogenic impacts in the last 2000 years: a multidisciplinary approach in the outer region of Sepetiba Bay (SE Brazil)

Abstract Purpose Some marine organisms can be used as Biological Quality Elements to estimate the degree of environmental impact and to monitor the health of benthic habitats. Organisms with mineralized protections, such as benthic foraminifera, can provide helpful information on the evolution of the coastal system over a long period and determine the Paleo-Ecological Quality Status (Paleo-EcoQS). This work aims at reconstructing the Paleo-EcoQS in the heavily anthropized Sepetiba Bay (SB; Rio de Janeiro State, SE Brazil). Materials and methods This work is based on a multiproxy approach, including textural, geochemical, and foraminiferal data along the core SP11 retrieved near the Pico da Marambaia (a mountain on the tip of the Marambaia Barrier Island). Geochemical analyses encompassing total organic carbon (TOC), total sulfur (S), total nitrogen (N), calcium carbonate (CaCO3), stable isotopes in organic matter (OMδ13C, and OMδ15N) and elemental concentrations as well as 201Pb, 137Cs, and radiocarbon dating were performed to characterize the Paleo-EcoQS in the bay. Results The values of the Paleo-EcoQS.st (standardized Paleo-EcoQS) index in core SP11 indicate that the paleoenvironmental quality varied from moderate to good between ≈50 AD and ≈1500 AD and from good to high between the ~ 1920s and ~ 1990s. Since the 1990s, the Paleo-EcoQS.st has deteriorated considerably, probably due to the deposition of contaminated dredging material in nearby areas. Ballast water discharge may have introduced alien species, such as Ammonia buzasi, into the SB. Conclusions The results obtained in core SP11, compared to those of another core (i.e., SP8) from a nearby area, suggest that the reference level of maximum environmental quality is not always reached in a period before industrialization in coastal ecosystems with significant interaction with the ocean; natural factors, related, for example, to sedimentary dynamic processes or geomorphological changes, can lead to unexpected results.

Heavy Metal Content in the Soil of Baiji Refinery and Surrounding Area, Controlling its Distribution Factors

This study was conducted to analyze the presence of heavy metals within the soil inside and around Baiji Oil Refinery and their factors that control the spatial distribution of metals in soils existed as (organic matter (OM), iron-manganese, pH, clay minerals). In this study, geochemical analysis of Baiji Oil Refinery soil and nearby areas was conducted by Atomic Absorption Spectrophotometer (AAS). Twenty two samples were analysed in which the results showed heavy metal as (Cd, Pb, Cr, Ni, Fe, Mn, Zn and Cu) concentrations that most of these metals were found to be higher than their global limits in the soil, except (Fe, Mn and Zn) found to be within those limits. Controlling factors were conducted for six samples, three of highest concentrations and three of lowest one. The results reveal that the mean concentration of OM in the highest concentrations was 1.64% while the lowest concentrations was 1.59%, the mean concentration of Fe-Mn was in the highest concentrations 23380-359 ppm and in the lowest samples was 11304-114 ppm, respectively. The mean concentration for the pH in the highest concentrations was 8.5 and for the samples within the lowest concentrations was 7.9. However, the mean clay for the samples within the highest concentration were 1.04%, whereas the samples within the lowest concentration were 1.48%. The results showed that the controlling factors did not affect the soil heavy metal distribution of Baiji Oil Refinery and their nearby areas. Therefore, such results indicate the role of industrial processes (oil industries) in increasing the concentration of heavy metals in the soils in addition to the elements inherited from the parent rocks.

Biochar as a strategy to manage stem rot disease of groundnut incited by Sclerotium rolfsii

Due to the pathogen’s ability to survive in the soil for longer durations, soil-borne diseases are often difficult to control. This study investigates the multifaceted impacts of biochar on the management of stem rot disease in groundnut and its influence on soil properties and microbial communities. The effects of biochar at different concentrations, such as 0%, 1%, 3%, and 5% on groundnut stem rot disease incited by Sclerotium rolfsii were evaluated thoroughly. Under laboratory conditions, biochar exhibited no direct inhibitory effects on S. rolfsii at varying concentrations but revealed an indirect suppression of sclerotial body production, suggesting a concentration-dependent influence on pathogen resting structures. Further, it was observed that biochar treatments effectively delayed symptom onset and reduced disease progression in groundnut plants, with significant variation observed among genotypes and biochar concentrations. Notably, interactions involving genotypes ICGV 171002 and ICGV 181035 with BC2 + Sr (3% conc. of biochar + S. rolfsii) and BC3 + Sr (5% conc. of biochar + S. rolfsii) treatments showed superior efficacy in disease reduction under controlled conditions. Field evaluations confirmed these findings, highlighting genotype-specific responses to biochar treatments. However, no significant difference was observed between BC2 + Sr (3%) and BC3 + Sr (5%) treatments in managing stem rot disease compared to controls. Biochar application significantly increased soil nutrient levels, including nitrogen, phosphorus, and potassium, and increased soil organic matter content, EC, pH, emphasizing its potential to improve soil fertility. Overall, these findings highlight the potential benefits of biochar for sustainable agriculture through disease management, soil nutrient enrichment, and microbial modulation, warranting further investigation into optimal application strategies across different agricultural contexts.

Effects of Applying Organic Amendments on Soil Aggregate Structure and Tomato Yield in Facility Agriculture

Amendment significantly improves soil structure and promotes crop growth. To combat soil degradation and low crop yields in facility agriculture, it is crucial to study the optimal application rate of amendments. This study analyzed the effects of biochar, vermicompost, and mineral-source potassium fulvic acid on the stability of aggregate structure, soil nutrient content, and tomato yield in cambisols, providing a theoretical basis for improving the soil quality of plastic greenhouses in Southern China. A pot experiment on tomato cultivation was carried out in yellow-brown soil in plastic greenhouses. The experiment included eight treatments: 1% biochar (B1); 3% biochar (B3); 5% biochar (B5); 3% vermicompost (V3); 5% vermicompost (V5); 0.1% mineral-source potassium fulvic acid (F1); 0.2% mineral-source potassium fulvic acid (F2); and the control condition without adding soil amendments (CK). The results showed that the biochar and vermicompost treatments effectively reduced soil bulk density and increased total soil porosity. Compared to the control, treatments with soil amendments significantly increased soil pH and had different effects on soil nutrients: F2 showed the most significant improvement in the content of available nitrogen, available phosphorus, and available potassium, with an increase of 133.33%, 834.59%, and 74.34%, respectively; B3 treatment had the highest increase in dissolved organic carbon (DOC), while B5 treatment had the highest organic matter content. Compared to the CK, the particle size of the biochar treatment was mainly 0.053~0.25 mm, while the V3, F1, and F2 mainly occurred with a particle size &gt; 0.25 mm; and V3 has the best aggregate stability. Biochar, vermicompost, and mineral potassium fulvic acid can all promote tomato yield, with the F2 and V3 treatments having a yield increase effect of over 30%. Furthermore, Pearson’s correlation analysis showed a highly significant positive correlation between geometric mean diameter (GMD) and mean weight diameter (MWD), water-stable macroaggregate content (R0.25), and a positive correlation between alkaline-dissolved nitrogen, available phosphorus, dissolved organic carbon content, and aggregate stability indicators. Adding 0.2% mineral-source potassium fulvic acid optimizes cambisols’ properties, enhances aggregate formation and stability, boosts tomato yield, and shows great application potential.

Fiber morphological characteristics of bamboo Ferrocalamus strictus culms from different geographical distribution regions

The fiber index including fiber length, width, wall thickness and lumen diameter of Ferrocalamus strictus culms (1, 2, and ≥ 3 years) from Jinping, Mojiang and Lvchun counties of Yunnan Province was determined and the elemental content of the soil was also determined to analyze the fiber characteristics. The average relative fiber index measured for F. strictus culms were fiber length (1.30 mm), width (21.57 μm), slenderness ratio (60.79 μm), wall thickness (4.21 μm), lumen diameter (7.22 μm), and runkel ratio (1.22 μm), which belonged to the range of middle and long fibers. The fiber length increased with the culm age. The proportion of long fiber increased while short fibers decreased along with culm maturing. The fiber morphology did not show a specific trend with the culm height. Fiber length reached the maximum in the bottom portions of the culms. There is a correlation between fiber morphology and soil elements, the content of organic matter, total potassium, total sulfur, total aluminum, total zinc, total iron, total boron, alkali-hydrolyzed nitrogen and available silicon in the soil affects fiber morphology. The content of organic matter, total boron and alkali-hydrolyzed nitrogen in the soil from Mojiang County was largest. Comparatively, the culm fiber in Mojiang County had the best fiber index performance for utilization, since the greatest proportion of medium and long fibers and the optimal distribution of fiber length frequency was obtained from the culms in Mojiang County. This study can provide a theoretical basis for large-scale bamboo forest cultivation and the development and utilization of bamboo culm fiber.

Soil Biocrusts May Exert a Legacy Impact on the Rhizosphere Microbial Community of Plant Crops

Biological soil crusts (biocrusts) play important ecological roles in many ecosystems, but their legacy effects in subtropical agricultural systems are poorly understood. This study investigated how biocrusts impact soil properties and subsequent crop rhizosphere microbiomes. Soil with (+BC) and without (−BC) biocrusts was cultivated and used to grow pepper plants in a greenhouse experiment. Soil physicochemical properties and microbial communities in the pre-planting soils, and microbial communities in crop rhizosphere were analyzed. The results showed that soils with biocrust had significantly higher organic matter, total nitrogen, alkaline hydrolyzable nitrogen, total phosphorus, and total potassium content. Microbial community structures differed significantly among treatments, with −BC soils exhibiting higher microbial diversity in pre-planting conditions, while +BC soils showed higher diversity in crop rhizosphere soils. Soil properties, especially extractable potassium, total nitrogen, and organic matter content, were significantly correlated with rhizosphere microbial community structure. Additionally, our results showed that the first principal coordinate (PCoA1) of soil microbial community structure was significantly correlated with rhizosphere microbiota. Multiple regression analysis revealed that pre-planting soil microbial diversity indices and certain soil physicochemical properties could predict crop rhizosphere soil microbial diversity. Our results demonstrate that biocrusts can enhance soil fertility and alter microbial communities in subtropical agricultural soils, with persistent effects on the crop rhizosphere microbiome. This study provides new insights into the ecological legacy of biocrusts in managed subtropical ecosystems and their potential agricultural implications.

The Control of Isolated Kerogen on Pore Structure and Heterogeneity in Marine-Continental Transitional Shale: A Case Study on the Taiyuan Formation, Northern Ordos Basin

Accurately determining the pore structure and heterogeneity characteristics of marine-continental transitional shale in the Taiyuan Formation is crucial for evaluating the shale gas resources in the northern Ordos Basin. However, the studies on pore characteristics and heterogeneity of marine-continental transitional shales and isolated kerogen are limited. This study collected Taiyuan Formation shale in the northern Ordos Basin, and corresponding kerogen isolated from shale and used N2 and CO2 adsorption experiment and Frenkel–Halsey–Hill and Volume-Specific Surface Area model to investigate the pore structure and heterogeneity of both. The results show that the isolated kerogen is dominated by micropores, and the micropore’s specific surface area and volume are 4.7 and 3.5 times the corresponding shale, respectively. In addition, the microporous heterogeneity of the isolated kerogen is stronger than that of shale, while the mesoporous heterogeneity is exactly the opposite. Meanwhile, the micropores fractal dimension Dm is positively correlated with organic matter (OM) content, while mesopores fractal dimension D1 and D2 are negatively linearly correlated with TOC content and have no significant relationship with clay mineral and quartz content (but show a significant positive correlation with illite and illite/smectite mixed layer). Isolated kerogen plays an important role in the pore (especially micropores) heterogeneity of shale, while other minerals (such as clay minerals) have a controlling effect on the mesopores heterogeneity of shale. Compared with marine shale, the marine-continental transitional shale of the Taiyuan Formation has a lower fractal dimension and better connectivity, which is conducive to shale gas seepage and migration. The final result can provide a significant basis for the reserve evaluation and the optimization of desert areas in the marine-continental transitional shale gas in the northern Ordos Basin.

Effects of artemia and tilapia density on the ability to treat organic matter in wastewater from white leg shrimps (Litopenaeus vannamei) farming

White leg shrimp (Litopenaeus vannamei) farming effluent contains pollutants that include high levels of total suspended solid (TSS), chemical oxygen demand (COD) and growth promoting substances. This study investigated the possibility of using artemia to filter suspended solids and Tilapia (Oreochromis niloticus) to consume organic waste of shrimp, uneaten food at the bottom of wastewater tanks of industrial shrimp farming. Both artemia and Tilapia had the ability to rapidly reduce organic matter content in wastewater of industrial shrimp farming in tanks. This contributed to reducing total suspended solid in wastewater when discharged into the environment. The biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), total suspended solid (TSS) met effluent standards in Circular No. 44/2010/TT-BNNPTNT and QCVN 11-MT:2015/BTNMT in all of the investigated plots. In the surface wastewater of wastewater tanks, the remaining TSS, BOD₅, and COD contents were the lowest at 6.2 ± 1.1 mg/L, 3.9 ± 0.5 mg/L, and 8.6 ± 1.4 mg/L, respectively, in the stocking density of 300 artemia individuals/L. In the bottom wastewater, the remaining TSS, BOD₅, and COD contents were the lowest at 21.4 ± 5.1 mg/L, 8.5 ± 1.5 mg/L, and 11.6 ± 3.6 mg/L, respectively, in the stocking density of 16 Tilapia individuals/m3.

Analysis of subtract quality along the Wiringtasi River, Barru Regency, Indonesia

This research aims to determine the quality of the substrate of the Wiringtasi River, Barru Regency, Indonesia. The research locations include location 1, namely the location around the rice field area; location 2, namely the location around the pond area and beach; and location 3, namely the location around the river estuary where many mangrove plants grow around it. Subtract samples were taken at the research location, then the samples were taken to the laboratory for analysis. The results of laboratory analysis are made in the form of pictures and tables, then analyzed using descriptive analysis. The results of the research show that in this study the substrate quality of the Wiringtasi River, Barru Regency, Indonesia, each had a pH value of the substrate in the range of 8.05-8.64, total nitrogen was in the range. Nitrogen was in the range of 0.049-0.121%. The organic material content of the substrate is in the range of 0.33-0.59. The ammonia (NH3) content of the substrate is in the range of 0.019–0.45 ppm. The nitrite content of the research location is in the range of 0.0025-0.0064 ppm. The substrate texture of location 1 is dusty clay, while locations 2 and 3 are sandy.

Seasonal and Climatic Drivers of Wet Deposition Organic Matter at the Continental Scale

AbstractDissolved organic matter (DOM) concentrations and composition within wet deposition are rarely monitored despite contributing a large input of bioavailable dissolved organic carbon (DOC) and nitrogen (DON) to the Earth's surface. Lacking from the literature are spatially comprehensive assessments of simultaneous measurements of wet deposition DOC and DON chemistry and their dependencies on metrics of climate and environmental factors. Here, we use archived precipitation samples from the US National Atmospheric Deposition Program collected in 2017 to 2018 from 17 sites across six ecoregions to investigate variability in the concentration and composition of depositional DOM. We hypothesize metrics of DOM chemistry vary with ecoregion, season, large‐scale climate drivers, and precipitation geographic source. Findings indicate differences in DOC and DON concentrations and loads among ecoregions. The highest wet deposition concentrations are from sites in the Northern Forests and lowest concentrations from sites in Marine West Coast Forests. Summer and autumn samples contained the highest DOC concentrations and DON concentrations that were consistently above detection limit, corresponding with seasonality of peak air temperatures and the phenology of the growing season in the northern hemisphere. Compositional trends suggest lighter DOM molecules in autumn and winter and heavier molecules in spring and summer. Climate drivers explain 51% of variation in DOM chemistry, revealing differing drivers on the concentrations and loads of DOC versus DON in wet deposition. This study highlights the necessity of incorporating DOC and DON measurements into national deposition monitoring networks to understand spatial and temporal feedbacks between climate change, atmospheric chemistry and landscape biogeochemistry.