Order Of Magnitude Higher Frequency Research Articles

Control systems and data management for high-power laser facilities

Abstract The next generation of high-power lasers enables repetition of experiments at orders of magnitude higher frequency than what was possible using the prior generation. Facilities requiring human intervention between laser repetitions need to adapt in order to keep pace with the new laser technology. A distributed networked control system can enable laboratory-wide automation and feedback control loops. These higher-repetition-rate experiments will create enormous quantities of data. A consistent approach to managing data can increase data accessibility, reduce repetitive data-software development and mitigate poorly organized metadata. An opportunity arises to share knowledge of improvements to control and data infrastructure currently being undertaken. We compare platforms and approaches to state-of-the-art control systems and data management at high-power laser facilities, and we illustrate these topics with case studies from our community.

Nonlinear Impedance Spectroscopy of Organic MIS Capacitors and Planar Heterojunction Diodes

We present a nonlinear impedance spectroscopy technique and demonstrate its ability to directly measure nonlinear processes including electron-hole recombination and space charge effects in organic-semiconductor-based diodes and MIS capacitors. The method is based on Fourier analysis of the measured higher harmonic current response to an AC voltage signal. Characterization of the higher harmonic response allows nonlinear impedance spectroscopy to measure material and device properties over a wide range of frequencies, which would otherwise be impossible using conventional impedance spectroscopy. As the higher harmonic signals are purely a product of nonlinear processes, they are independent of the linear device capacitance and resistance. This allows space charge and recombination effects to be investigated at several orders of magnitude higher frequency without fitting to an equivalent circuit model.

Analysis of the London penetration depth in Ni-doped CaKFe4As4

We report combined experimental and theoretical analysis of superconductivity in CaK(Fe$_{1-x}$Ni$_x$)$_4$As$_4$ (CaK1144) for $x=$0, 0.017 and 0.034. To obtain the superfluid density, $\rho=\left(1+\Delta \lambda_L(T)/\lambda_L(0) \right)^{-2}$, the temperature dependence of the London penetration depth, $\Delta \lambda_L (T)$, was measured by using tunnel-diode resonator (TDR) and the results agreed with the microwave coplanar resonator (MWR) with the small differences accounted for by considering a three orders of magnitude higher frequency of MWR. The absolute value of $\lambda_L (T \ll T_c) \approx \lambda_L(0)$ was measured by using MWR, $\lambda_L (\mathrm{5~K}) \approx 170 \pm 20$ nm, which agreed well with the NV-centers in diamond optical magnetometry that gave $\lambda_L (\mathrm{5~K}) \approx 196 \pm 12$ nm. The experimental results are analyzed within the Eliashberg theory, showing that the superconductivity of CaK1144 is well described by the nodeless s$_{\pm}$ order parameter and that upon Ni doping the interband interaction increases.

Multimode probing of superfluid 4He by tuning forks

Flexural mode vibrations of miniature piezoelectric tuning forks (TFs) are known to be highly sensitive to superfluid excitations and quantum turbulence in 3He and 4He quantum fluids, as well as to the elastic properties of solid 4He, complementing studies by large scale torsional resonators. Here, we explore the sensitivity of a TF, capable of simultaneously operating in both the flexural and torsional modes, to excitations in the normal and superfluid 4He. The torsional mode is predominantly sensitive to shear forces at the sensor–fluid interface and much less sensitive to changes in the density of the surrounding fluid when compared to the flexural mode. Although we did not reach the critical velocity for the quantum turbulence onset in the torsional mode, due to its order of magnitude higher frequency and increased acoustic damping, the torsional mode was directly sensitive to fluid excitations, linked to quantum turbulence created by the flexural mode. The combination of two dissimilar modes in a single TF sensor can provide a means to study the details of elementary excitations in quantum liquids and at interfaces between solids and quantum fluid.

Nonlinear impedance spectroscopy of organic MIS capacitors and planar heterojunction diodes

Abstract We present a nonlinear impedance spectroscopy technique and demonstrate its ability to directly measure nonlinear processes including electron-hole recombination and space charge effects in organic-semiconductor-based diodes and MIS capacitors. The method is based on Fourier analysis of the measured higher harmonic current response to an AC voltage signal. Characterization of the higher harmonic response allows nonlinear impedance spectroscopy to measure material and device properties over a wide range of frequencies, which would otherwise be impossible using conventional impedance spectroscopy. As the higher harmonic signals are purely a product of nonlinear processes, they are independent of the linear device capacitance and resistance. This allows space charge and recombination effects to be investigated at several orders of magnitude higher frequency without fitting to an equivalent circuit model.

Lithographed Superconducting Resonator Development for Next-Generation Frequency Multiplexing Readout of Transition-Edge Sensors

Ground-based cosmic microwave background (CMB) experiments are undergoing a period of exponential growth. Current experiments are observing with 1000–10,000 detectors, and the next-generation experiment (CMB stage 4) is proposing to deploy approximately 500,000 detectors. This order of magnitude increase in detector count will require a new approach for readout electronics. We have developed superconducting resonators for next-generation frequency-domain multiplexing (fMUX) readout architecture. Our goal is to reduce the physical size of resonators, such that resonators and detectors can eventually be integrated on a single wafer. To reduce the size of these resonators, we have designed spiral inductors and interdigitated capacitors that resonate around 10–100 MHz, an order of magnitude higher frequency compared to current fMUX readout systems. The higher frequency leads to a wider bandwidth and would enable higher multiplexing factor than the current $$\sim $$ 50 detectors per readout channel. We will report on the simulation, fabrication method, characterization technique, and measurement of quality factor of these resonators.

High frequency travelling surface acoustic waves for microparticle separation

In this study, we have demonstrated a particle separation device taking advantage of the high frequency sound waves. The sound waves, in the form of surface acoustic waves, are produced by an acoustofluidic platform built on top of a piezoelectric substrate bonded to a microfluidic channel. The particles’ mixture, pumped through the microchannel, is focused using a sheath fluid. A Travelling surface acoustic wave (TSAW), propagating normal to the flow, interacts with the particles and deflects them from their original path to induce size-based separation in a continuous flow. We initially started the experiment with 40 MHz TSAWs for deflecting 10 µm diameter polystyrene particles but failed. However, larger diameter particles (~ 30 µm) were successfully deflected from their streamlines and separated from the smaller particles (~ 10 µm) using TSAWs with 40 MHz frequency. The separation of smaller diameter particles (3, 5 and 7 µm) was also achieved using an order of magnitude higher-frequency (~ 133 MHz) TSAWs.

Production of viable male unreduced gametes in Brassica interspecific hybrids is genotype specific and stimulated by cold temperatures.

BackgroundUnreduced gametes (gametes with the somatic chromosome number) may provide a pathway for evolutionary speciation via allopolyploid formation. We evaluated the effect of genotype and temperature on male unreduced gamete formation in Brassica allotetraploids and their interspecific hybrids. The frequency of unreduced gametes post-meiosis was estimated in sporads from the frequency of dyads or giant tetrads, and in pollen from the frequency of viable giant pollen compared with viable normal pollen. Giant tetrads were twice the volume of normal tetrads, and presumably resulted from pre-meiotic doubling of chromosome number. Giant pollen was defined as pollen with more than 1.5 × normal diameter, under the assumption that the doubling of DNA content in unreduced gametes would approximately double the pollen cell volume. The effect of genotype was assessed in five B. napus, two B. carinata and one B. juncea parents and in 13 interspecific hybrid combinations. The effect of temperature was assessed in a subset of genotypes in hot (day/night 30°C/20°C), warm (25°C/15°C), cool (18°C/13°C) and cold (10°C/5°C) treatments.ResultsBased on estimates at the sporad stage, some interspecific hybrid genotypes produced unreduced gametes (range 0.06 to 3.29%) at more than an order of magnitude higher frequency than in the parents (range 0.00% to 0.11%). In nine hybrids that produced viable mature pollen, the frequency of viable giant pollen (range 0.2% to 33.5%) was much greater than in the parents (range 0.0% to 0.4%). Giant pollen, most likely formed from unreduced gametes, was more viable than normal pollen in hybrids. Two B. napus × B. carinata hybrids produced 9% and 23% unreduced gametes based on post-meiotic sporad observations in the cold temperature treatment, which was more than two orders of magnitude higher than in the parents.ConclusionsThese results demonstrate that sources of unreduced gametes, required for the triploid bridge hypothesis of allopolyploid evolution, are readily available in some Brassica interspecific hybrid genotypes, especially at cold temperatures.