Satellite Sensors Research Articles

Evaluation of the Monitoring Capability of 20 Vegetation Indices and 5 Mainstream Satellite Band Settings for Drought in Spring Wheat Using a Simulation Method

This study simulated the canopy reflectance of spring wheat at five distinct growth stages (jointing, booting, heading, flowering, and pustulation) and under four drought scenarios (no drought, mild drought, moderate drought, and severe drought) using the PROSAIL radiative transfer model, and it identified the wavelength range most sensitive to drought. Additionally, the efficacy of 5 mainstream satellites (Sentinel-2, Landsat 8, Worldview-2, MODIS, and GF-2) and 20 commonly utilized remote sensing vegetation indicators (NDVI, SAVI, EVI, ARVI, GVMI, LSWI, VSDI, NDGI, SWIRR, NDWI, PRI, NDII, MSI, WI, SRWI, DSWI, NDREI1, NDREI2, ZMI, and MTCI) in drought monitoring was evaluated. The results indicated that the spectral response characteristics of spring wheat canopy reflectance vary significantly across the growth stages. Notably, the wavelength ranges of 1405–1505 nm and 2140–2190 nm were identified as optimal for drought monitoring throughout the growth period. Considering only the spectral bands, MODIS band 7 was determined to be the most suitable satellite band for monitoring drought in spring wheat at different growth stages. Among the 20 indices examined, WI, MSI, and SRWI, followed by LSWI and GVMI calculated using MODIS bands 2 and 6 as well as bands 8 and 11 of Sentinel-2, demonstrated superior capabilities in differentiating drought scenarios. These conclusions have important implications because they provide valuable guidance for selecting remote sensing drought monitoring data and vegetation indices, and they present insights for future research on the design of new remote sensing indices for assisting drought monitoring and the configuration of remote sensing satellite sensors.

How remote sensing choices influence ecosystem services monitoring and evaluation results of ecological restoration interventions

Large-scale ecological restorations are recognized worldwide as an effective strategy to combat environmental degradation and promote sustainability. Remote sensing (RS) imagery, such as obtained from Landsat and Sentinel-2 satellites, can provide spatial, spectral, and temporal information on ecosystem service supply to support monitoring and evaluation of restoration interventions. However, because of the abundance of satellite data and methodological analysis options, choices in data selection and processing options need to be made. This study explored the effect of RS choices on the evaluation of changes in ecosystem services as a result of ecological restoration interventions. Using the ecosystem service of forage provision for wildlife as an example, we used a before-after-control-impact (BACI) analysis to compare how the following choices affected restoration evaluation outcomes: a) different number of control pixels; b) different spatial distribution of control pixels; c) intra-annual image selection; and d) different reference periods. In addition, e) we evaluated the effect of using two different satellite sensor types, using the ecosystem service ‘erosion prevention’ as an example. We explored the effect of these five choices for restoration sites in the Baviaanskloof, South Africa. Results showed that the choice of intra-annual image selection, and the reference period describing the ‘before state’ had a strong effect on the outcomes, often leading to opposite BACI evaluation results. BACI results were less sensitive to choices related to the number of control points in the evaluation. The impact of methodological choices on the BACI outcomes was greater for the less degraded areas of our study site. Satellite sensor choice resulted in similar temporal trajectories of estimated supply. We demonstrated that RS choices have a strong effect on the evaluation results of restoration interventions. Therefore, we recommend that documenting the key RS choices results is essential when communicating restoration evaluation results in order to properly understand, manage and adapt restoration initiatives.

Mid-Infrared Variable Selection for Soil Organic Matter Fractions Based on Soil Model Systems and Permutation Importance Algorithm.

In this research, an attempt was made to classify soil samples according to the different fractions of soil organic matter (SOM) using model systems in which the ratio of the fractions of SOM is chemically mimicked. A mixture of starch and nicotinamide was used for the labile organic matter model, while a standard of humic acid was used for the stabile organic matter. Changing the threshold value in the selected ranges after a permutation importance algorithm is conducted using train models and test data set, a list of selected important wavelengths and their importance scores were obtained. Three regions for the classification of soil fractions within the estimated probability density function are most prominent: 800-1200 cm-1, 0.48-0.55; 1800-2000 cm-1, 0.52-0.62; and 2500-3200 cm-1, 0.48-0.62, where the first component represents the spectral range while the second component covers the range of the importance score. Obtained wavelength ranges indicate the importance of the aliphatic stretching and bending vibration region, as well as the total soil reflectance (mineral content) for the characterization of organic matter fractions. A comparative evaluation with literature data found that the obtained wavelengths have a potential for application in methods of proximal and remote detection/calibration of existing and development of new sensors for Advanced Spaceborne Thermal Emission and Reflection Radiometer satellites, specifically in the shortwave infrared and thermal infrared ranges.

Mapping Agricultural Land in Afghanistan’s Opium Provinces Using a Generalised Deep Learning Model and Medium Resolution Satellite Imagery

Understanding the relationship between land use and opium production is critical for monitoring the dynamics of poppy cultivation and developing an effective counter narcotics policy in Afghanistan. However, mapping agricultural land accurately and rapidly is challenging, as current methods require resource-intensive and time consuming manual image-interpretation. Deep convolutional neural nets have been shown to greatly reduce the manual effort in mapping agriculture from satellite imagery but require large amounts of densely labelled training data for model training. Here we develop a generalised model using past images and labels from different medium resolution satellite sensors for fully automatic agricultural land classification using the latest medium resolution satellite imagery. The model (FCN-8) is first trained on Disaster Monitoring Constellation (DMC) satellite images from 2007 to 2009. The effect of shape, texture and spectral features on model performance are investigated along with normalisation in order to standardise input medium resolution imagery from DMC, Landsat-5, Landsat-8, and Sentinel-2 for transfer learning between sensors and across years. Textural features make the highest contribution to overall accuracy (∼73%) while the effect of shape is minimal. The model accuracy on new images, with no additional training, is comparable to visual image interpretation (overall > 95%, user accuracy > 91%, producer accuracy > 85%, and frequency weighted intersection over union > 67%). The model is robust and was used to map agriculture from archive images (1990) and can be used in other areas with similar landscapes. The model can be updated by fine tuning using smaller, sparsely labelled datasets in the future. The generalised model was used to map the change in agricultural area in Helmand Province, showing the expansion of agricultural land into former desert areas. Training generalised deep learning models using data from both new and long-term EO programmes, with little or no requirement for fine tuning, is an exciting opportunity for automating image classification across datasets and through time that can improve our understanding of the environment.

Integrating Earth observation IMINT with OSINT data to create added-value multisource intelligence information: A case study of the Ukraine–Russia war

The Russian invasion of Ukraine on 24 February 2022 heralded a new “social media war” era. This “hybrid warfare” extends beyond the military landscape and includes attacks in cyberspace and fake news with the aim of destabilising governments. The goal of this paper is to present a high-level of architecture based on imagery intelligence (IMINT) and geospatial intelligence (GEOINT) using geographic datasets and state-of-the-art methods. Integration with intelligence information (like Open-Source Intelligence [OSINT]) produces multiintelligent knowledge for security and defence decision-making end users. The results depict a harmonious and creative collaboration between IMINT, OSINT, and GEOINT. OSINT data helps to identify and describe the meteorological conditions that are present, contributing to the procedure’s responsiveness. Weather and dense cloud cover above Ukraine poses a challenge for optical imaging satellites, but synthetic aperture radar (SAR) sensor satellites can operate at night and overcome the problem. We carried out OSINT and IMINT analysis, monitoring the situation shortly after the invasion. OSINT data helped in the choice of an appropriate area of interest. Using the right Earth observation satellite system and artificial intelligence/machine learning algorithms is the best way to keep an eye on many different sites over long periods, send out alerts about unusual activity, and find new places where incoherent changes might be happening.

Detection of Tree Species in Beijing Plain Afforestation Project Using Satellite Sensors and Machine Learning Algorithms

Mapping tree species distributions in urban areas is significant for managing afforestation plans and pest infestations but can be challenging over large areas. This research compared the classification accuracy of three data sources and three machine learning algorithm combinations. It evaluated the cost benefit of various combinations by mapping the species distribution of the Beijing Plain Afforestation Project with a three-level hierarchical approach. First, vegetation and non-vegetation were mapped. Then, tree crowns were extracted from the vegetation mask. Finally, Decision Tree (DT), Support Vector Machines (SVM), and Random Forest (RF) were applied to the three data sources: Pléiades-1B, WorldView-2, and Sentinel-2. The tree species classification was based on the original bands and spectral and texture indices. Sentinel-2 performed well at the stand level, with an overall accuracy of 89.29%. WorldView-2 was significantly better than Pléiades-1 at the single-tree identification level. The combination of WorldView-2 and SVM achieved the best classification result, with an overall accuracy of 90.91%. This research concludes that the low-resolution Sentinel-2 sensor can accurately map tree areas while performing satisfactorily in classifying pure forests. For mixed forests, on the other hand, WorldView-2 and Pléiades-1, which have higher resolutions, are needed for single-tree scale classification. Compared to Pléiades-1, WorldView-2 produced higher classification accuracy. In addition, this study combines algorithm comparison to provide further reference and guidance for plantation forest classification.

Demonstration of a Modular Prototype End-to-End Simulator for Aquatic Remote Sensing Applications.

This study introduces a prototype end-to-end Simulator software tool for simulating two-dimensional satellite multispectral imagery for a variety of satellite instrument models in aquatic environments. Using case studies, the impact of variable sensor configurations on the performance of value-added products for challenging applications, such as coral reefs and cyanobacterial algal blooms, is assessed. This demonstrates how decisions regarding satellite sensor design, driven by cost constraints, directly influence the quality of value-added remote sensing products. Furthermore, the Simulator is used to identify situations where retrieval algorithms require further parameterization before application to unsimulated satellite data, where error sources cannot always be identified or isolated. The application of the Simulator can verify whether a given instrument design meets the performance requirements of end-users before build and launch, critically allowing for the justification of the cost and specifications for planned and future sensors. It is hoped that the Simulator will enable engineers and scientists to understand important design trade-offs in phase 0/A studies easily, quickly, reliably, and accurately in future Earth observation satellites and systems.

Leveraging multimission satellite data for spatiotemporally coherent cyanoHAB monitoring

Cyanobacteria harmful algal blooms (cyanoHABs) present a critical public health challenge for aquatic resource and public health managers. Satellite remote sensing is well-positioned to aid in the identification and mapping of cyanoHABs and their dynamics, giving freshwater resource managers a tool for both rapid and long-term protection of public health. Monitoring cyanoHABs in lakes and reservoirs with remote sensing requires robust processing techniques for generating accurate and consistent products across local and global scales at high revisit rates. We leveraged the high spatial and temporal resolution chlorophyll-a (Chla) and phycocyanin (PC) maps from two multispectral satellite sensors, the Sentinel-2 (S2) MultiSpectral Instrument (MSI) and the Sentinel-3 (S3) Ocean Land Colour Instrument (OLCI) respectively, to study bloom dynamics in Utah Lake, United States, for 2018. We used established Mixture Density Networks (MDNs) to map Chla from MSI and train new MDNs for PC retrieval from OLCI, using the same architecture and training dataset previously proven for PC retrieval from hyperspectral imagery. Our assessment suggests lower median uncertainties and biases (i.e., 42% and -4%, respectively) than that of existing top-performing PC algorithms. Additionally, we compared bloom trends in MDN-based PC and Chla products to those from a satellite-derived cyanobacteria cell density estimator, the cyanobacteria index (CI-cyano), to evaluate their utility in the context of public health risk management. Our comprehensive analyses indicate increased spatiotemporal coherence of bloom magnitude, frequency, occurrence, and extent of MDN-based maps compared to CI-cyano and potential for use in cyanoHAB monitoring for public health and aquatic resource managers.

A comparative evaluation of deep convolutional neural network and deep neural network-based land use/land cover classifications of mining regions using fused multi-sensor satellite data

Accurate land use/land cover (LULC) classifications using satellite data is a challenging task due to the limited spatial and spectral resolutions of different satellite data. Moreover, the challenge is more severe for LULC classification of mining regions as no standardized spectral signature is available for the detection of coal mining regions. Thus, the current study aims to design deep learning algorithms using fused data of three satellite sensors (LISS-IV, Landsat-8, and Sentinel-2A) for LULC classification of mining regions. The fused image was derived from three satellite sensors using a discrete cosine transform (DCT) with a spatial correlation approach. A comparative evaluation of deep convolutional neural network (DCNN) and deep neural network (DNN) models in LULC classification of mining regions is conducted. Moreover, the performances of the models with fused data are compared with the performance of the same model with individual sensor data. The study area chosen to execute the work is Jharia Coalfield, which comprises five key LULC types, viz. barren land, coal mining region, built-up area, water body, and vegetation. A total of 6000 image samples of 6 × 6 sizes and 216,000 pixels were used to train and validate the DCNN and DNN models, respectively. That is, the DCNN model uses the object dataset and DNN uses the pixel dataset for model training and validation. The DCNN model achieved high training and validation accuracies (99.8% and 99.2%), while the DNN model achieved relatively lower accuracies (85.3% and 81.8%). The study evaluates the performance of both models further by employing confusion matrix parameters to measure accuracy, error, precision, and recall for each class. The results reveal that the DCNN model consistently outperforms the DNN model, showcasing accuracy, error rates, precision, and recall ranging from 99.83% to 99.99%, 0.01% to 0.17%, 99.52% to 99.99%, and 99.40% to 99.99% on the training dataset, and 99.50% to 99.99%, 0.01% to 0.50%, 98.35% to 99.99%, and 98.33% to 99.99% on the validation dataset, respectively. In comparison, the DNN model demonstrates values ranging from 90.36% to 99.90%, 0.01% to 9.64%, 75.10% to 99.53%, and 66.99% to 99.99% on the training dataset, and 88.50% to 99.94%, 0.06% to 11.50%, 72.25% to 99.66%, and 62.50% to 99.99% on the validation dataset. These findings showed that the DCNN classification algorithm outperforms the DNN classification algorithm. Moreover, the comparative performances of the DCNN model with different datasets indicate that the model with fused images outperformed the model with individual sensor images.

S2SHORES: A PYTHON LIBRARY FOR ESTIMATING COASTAL BATHYMETRY

Understanding coastal zone dynamics covering large spatial and dense temporal scales is paramount to understand and mitigate emerging coastal issues relating to climatological changes. However, the uncertainties on the coastal zone risks are still too large to predict effectively impacts on an overall increasing coastal population. Prediction, by deploying numerical models for waves, tide, and currents in the coastal zone, requires accurate and up-to-date bottom boundary conditions (bathymetry) to simulate coastal hydrodynamics accurately, let alone predict morphological change. There are three main approaches for estimating coastal bathymetry using satellite sensors: 1) linking water depth to a spectral response (colour), 2) underwater photogrammetry and 3) linking wave kinematics to a water depth. Here, we present S2Shores (Satellite to Shores), a python library that detects and extracts local wave parameters (geometry and kinematics) to derive coastal bathymetry.

SATELLITE DERIVED BATHYMETRY FOR MONITORING NEARSHORE DYNAMICS

Research on the physical, ecological, and environmental processes in the coastal zone traditionally rely on the availability of accurate seafloor topography (bathymetry) information. This information becomes increasingly important as coastal environments are under pressure by climate change and anthropogenic developments. Nonetheless, the bathymetry of shallow nearshore waters is only marginally monitored by cost- and time-intensive survey techniques that are dependent on in-field environmental conditions. Here, Satellite Derived Bathymetry (SDB) offers a valuable alternative to enrich available bathymetric data in both data sparse and data rich environments, reducing the need for in-situ measurements in the future. The high spatial and temporal resolution of satellite imagery yields a more comprehensive understanding of our coast and its dynamics. Yet, consistently mapping temporal change is still challenging, as the majority of currently available empirical SDB algorithms are heavily dependent on in-situ data for calibration purposes. In this study we present a methodology for assessing nearshore horizontal morphodynamics using the uncalibrated reflectance signal from satellite sensors while focusing on the Friese Zeegat, a tidal inlet of the Dutch Wadden Sea.

Estimativa do estoque de carbono no solo via espectroscopia de reflectância difusa (vis/nir) sensoriamento remoto aéreo e orbital

ABSTRACT Current procedures for determining soil organic carbon (SOC) content are costly, time-consuming, and generate polluting chemical waste. Therefore, developing new protocols using aerial and orbital remote sensing and diffuse reflectance spectroscopy (DRS) for digitally mapping the stock of soil organic carbon (CS) is essential for promoting actions of research and monitoring SOC in Brazilian soils. Given this, three areas of commercial plots in the region of the Middle North of Mato Grosso were studied, where sampling was carried out for the determination of SOC in the layer from 0 to 30 cm, evaluated by the dry combustion method and estimated through DRS in the visible to near -infrared region - Vis-NIR-SWIR/350-2500 nm). To obtain the images by aerial remote sensing, the Carcará II® Unmanned Aerial Vehicle was used, with a MicaSense® multispectral camera (RGB + NIR + RedEdge) attached. The orbital sensors used were the Sentinel 2® and Planet® satellites. This study showed that soil carbon stock values could be predicted using different modeling approaches based on field and laboratory spectral measurements. Predictive models to estimate SOC can be established using remote and near sensing, thus allowing a better understanding of spatial patterns of SOC in crop fields.

IMPACT OF HIGH RADIO FREQUENCY SATELLITE OSCILLATIONS ON INITIATING EARTHQUAKES

Advanced satellite technology is worse than all the disasters on Earth due to the lack of dynamic security. The study of earthquakes is the most innovative research of all man-made disasters - no doubt, but there are new horizons of wonder for the thoughtful. Earthquakes are increasing unexpectedly in different countries of the world. People of most countries are worried about sudden earthquakes, but no one is able to reveal the main secret of these earthquakes. Many are blaming nature for this earthquake. Through this survey the exact origin of the matter has been presented to the whole world with proper evidence. Research shows that climate criminals are misusing advanced satellite technology to cause these earthquakes. According to research, misuse of advanced satellite technology causes artificial earthquakes at specific GPS locations on Earth, resulting in severe damage to humans, animals, plants and other objects. The intensity of these earthquakes is so intense that everyone is surprised. Studies have shown that the misuse of satellite technology has caused massive damage in man-made technological earthquake at a particular tectonic plate and other disasters. Due to these sudden earthquake, human suffering increases, standing institutions are demolished, road communication systems are ruptured, crop lands and residential areas are destroyed, individuals lose their lives. The study revealed that artificial earthquakes are caused by sudden radio-waves and strong oscillations of variable magnitude anywhere on earth. The study also showed the climate criminals use various fake messages and wireless tracking to influence policy-makers, the public and the media, as can be doubted in this study, All citizens and administrations should be aware and vigilant to prevent the rise of earthquake terror. The research shows that using advanced satellite technology, earthquakes can be created in time on any tectonic plate on the Earth. Moreover, the question remains that when technology was not invented, but earthquakes occurred - which were natural. Humans now generate artificial oscillations at specific GPS locations through earthquake simulation coding by multiplying the magnetosphere of previous natural earthquakes. The study shows that the EMMAST (Earthquake Mitigation and Management through Advanced Satellite Technology) model will make disaster mitigation systems safer and more efficient, saving millions of lives. The study on earthquakes is unique with world- class scientific research, which will open many research gateways for future generations.

Evaluation of Machine Learning Algorithms in the Classification of Multispectral Images from the Sentinel-2A/2B Orbital Sensor for Mapping the Environmental Dynamics of Ria Formosa (Algarve, Portugal)

With the growing availability of remote sensing orbital spatial data, the applications of machine learning (ML) algorithms have been leveraging the field of process automation in image classification. The present work aimed to evaluate the precision and accuracy of ML algorithms in the classification of Sentinel 2A/2B images from an area of high environmental dynamics, such as Ria Formosa (Algarve, Portugal). The images were submitted to classification by groups of ML algorithms such as the Support Vector Machine (SVM), Random Forest (RF), K-Nearest Neighbors (KNN), and Decision Tree (DT). The Orfeo Toolbox (OTB) open-source programming package made the algorithms available. Ten samples were collected for each of the 14 land use and cover classes in the Ria Formosa area, totaling 140 samples. Of these, 70% were for training and 30% for validating the classification. The evaluation metrics used were the class discrimination measures: Recall (R), the Global Kappa Index (k), and the General Accuracy Index (OA). The results showed that the KNN and DT algorithms demonstrated a greater discrimination capacity for most classes. SVM and RF significantly improved class discrimination when using larger samples for training. Merging the classified images significantly improved the classification accuracy, ranging from 71% to 81%. This evaluation made it possible to define sets of ML algorithms sensitive to change detection for mapping and monitoring dynamic environments.

Delineating Management Zones with Different Yield Potentials in Soybean–Corn and Soybean–Cotton Production Systems

The delineation of management zones is one of the ways to enable the spatially differentiated management of plots using precision agriculture tools. Over the years, the spatial variability of data collected from soil and plant sampling started to be replaced by data collected by proximal and orbital sensors. As a result, the variety and volume of data have increased considerably, making it necessary to use advanced computational tools, such as machine learning, for data analysis and decision-making support. This paper presents a methodology used to establish management zones (MZ) in precision agriculture by analyzing data obtained from soil sampling, proximal sensors and orbital sensors, in experiments carried out in four plots featuring soybean–cotton and soybean–corn crops, in Mato Grosso and Paraná states, Brazil. Four procedures were evaluated, using different input data sets for the MZ delineation: (I) soil attributes, including clay content, apparent electrical conductivity or fertility, along with elevation, yield maps and vegetation indices (VIs) captured during the peak crop biomass period; (II) soil attributes in conjunction with VIs demonstrating strong correlations; (III) solely VIs exhibiting robust correlation with soil attributes and yield; (IV) VIs selected via random forests to identify the importance of the variable for estimating yield. The results showed that the VIs derived from satellite images could effectively replace other types of data. For plots where the natural spatial variability can be easily identified, all procedures favor obtaining MZ maps that allow reductions of 40% to 70% in yield variance, justifying their use. On the other hand, in plots with low natural spatial variability and that do not have reliable yield maps, different data sets used as input do not help in obtaining feasible MZ maps. For areas where anthropogenic activities with spatially differentiated treatment are already present, the exclusive use of VIs for the delineation of MZs must be carried out with reservations.

Consistent metropolitan boundaries for the remote sensing of urban land

This paper introduces an internationally consistent definition of metropolitan areas to the literature regarding the remote sensing of urban land use or land cover. In the cross-comparison of land use or land cover for explicitly bounded urban areas, the observed ‘economic’ definition is argued to hold distinct potential merits over administrative or agglomeration-based boundaries, which typically underpin other studies. To illustrate the proposed merits as well as their implications for the remote sensing literature, the empirical analysis considers the case of 687 European metropolitan areas. Across these metropolitan areas, whose boundaries are defined jointly by the OECD and the European Commission, land cover and land use are segmented in a fusion of imagery from radar and optical sensors in Sentinel satellites. Segmentation is achieved using deep learning in a well-established model architecture. The analytical focus is on built-up areas that are in a residential use or in a commercial or industrial use. Map classifications and accuracy measures are obtained for cities as well as their respective commuting zones as these together embody metropolitan areas. The results underline that not only land use area estimates but also map classification accuracy vary widely across individual metropolitan areas. Whereas classification accuracy to some degree varies for metropolitan areas within as well as between countries, classification accuracy is positively associated with population size and built-up area density as regression analysis confirms. Additionally, the extent of built-up areas in distinct uses is shown to vary across different types of metropolitan (sub-)areas. This study's findings highlight the typically unobserved role that study area definition and selection may play in affecting outcomes in remote sensing studies in urban settings, as relevant to both studies of single as well as multiple urban areas. The consistent comparison of remote sensing outcomes across metropolitan areas may further promote generalization in a growing and global field and potentially supports better-informed policy making processes.

Destriping of Remote Sensing Images by an Optimized Variational Model.

Satellite sensors often capture remote sensing images that contain various types of stripe noise. The presence of these stripes significantly reduces the quality of the remote images and severely affects their subsequent applications in other fields. Despite the existence of many stripe noise removal methods in the research, they often result in the loss of fine details during the destriping process, and some methods even generate artifacts. In this paper, we proposed a new unidirectional variational model to remove horizontal stripe noise. The proposed model fully considered the directional characteristics and structural sparsity of the stripe noise, as well as the prior features of the underlying image, to design different sparse constraints, and the ℓp quasinorm was introduced in these constraints to better describe these sparse characteristics, thus achieving a more excellent destriping effect. Moreover, we employed the fast alternating direction method of multipliers (ADMM) to solve the proposed non-convex model. This significantly improved the efficiency and robustness of the proposed method. The qualitative and quantitative results from simulated and real data experiments confirm that our method outperforms existing destriping approaches in terms of stripe noise removal and preservation of image details.

Anomaly Detection for Agile Satellite Attitude Control System Using Hybrid Deep-Learning Technique

Agile low-Earth-orbit (LEO) observation satellites need a robust attitude control and determination system. It is a critical satellite subsystem, which stabilizes the satellite to different desired orientations during its mission using different actuators. The detection of satellite misorientation is a highly challenging problem because it requires continuous monitoring of data from hundreds of satellite sensors to guarantee healthy operability. In this paper, the authors propose a data-driven deep-learning framework for detecting satellite misorientation by analyzing attitude control subsystem telemetry data. The proposed approach combines a hybrid predictive deep-learning model that consists of long short-term memory and convolutional neural networks in two parallel paths to predict telemetry data and a robust isolation forest classifier for anomaly detection purposes that can classify output residuals as normal or anomalous. The hybrid model was optimized by the particle swarm optimization algorithm to ensure faster fitness function convergence with optimal model hyperparameters. The suggested data-driven model was validated using real telemetry datasets, including real anomalous case studies. The experimental results proved the suggested approach’s superiority for identifying satellite misorientation as well as helping satellite operators monitor the system’s health and deduce the causes of anomalies to aid in decision-making.

Soil Moisture and Sea Surface Salinity Derived from Satellite-Borne Sensors

AbstractThe monitoring of soil moisture and sea surface salinity over the Earth has been profoundly enhanced during the last thirteen years due to a new generation of satellite sensors. L-band radiometry is currently the only technology providing direct measurements of soil moisture, insensitive to surface roughness and distribution of elements in the soil, and the only technology the only technology for measuring that allows us to measure sea surface salinity from space. The Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellite missions resolve global and local variability with a spatial resolution of approximately 43 km, a swath width close to 1000 km, and a sampling time, for each mission, of at least twice every 3 days. These resolutions and samplings can be increased by either merging data from the two sensors, and with complementary information gathered from other passive or active sensors, or with in situ information at higher spatial resolution. Numerous scientific studies based on the use of this new type of measurement have led to a better understanding and constraint of the processes governing the variability of the water cycle, ocean circulation and the Earth's climate. The continuity of measurements, and the increased spatial and radiometric resolution is critical for fulfilling scientific needs. Future L-band radiometry missions currently being planned in Europe (the Copernicus Imaging Microwave Radiometer), and in China (the Ocean Salinity mission) should provide better constraints on auxiliary parameters by combining multiple frequencies, but they will not have improved spatial resolution beyond SMOS and SMAP. The temporal continuity with SMOS and SMAP will likely not be ensured. In parallel, new concepts are being developed to increase spatial resolution of both land and ocean parameters.

Innovative remote sensing methodologies and applications in coastal and marine environments

ABSTRACT Remote sensing (RS) technologies are extensively exploited by scientists and a vast audience of local authorities, urban managers, and city planners. Coastal regions, geohazard-prone areas, and highly populated cities represent natural laboratories to apply RS technologies and test new methods. Over the last decades, many efforts have been spent on improving Earth’s surface monitoring, including intensifying Earth Observation (EO) operations by the major national space agencies. They oversee to plan and make operational constellations of satellite sensors providing the scientific community with extensive research and development opportunities in the geoscience field. For instance, within this framework, the European Space Agency (ESA) and the Ministry of Science and Technology of China (MOST) have sponsored, since the early 2000s, the DRAGON initiative jointly carried out by the European and Chinese RS scientific communities. This manuscript aims to provide a synthetic overview of some research activities and new methods recently designed and applied and trace the route for further developments. The main findings are related to i) the analysis of flood risk in China, ii) the potential of new methods for the estimation and removal of ground displacement biases in small-baseline oriented interferometric Synthetic Aperture Radar (SAR) methods, iii) the analysis of the inundation risk in low-lying regions using coherent and incoherent SAR methods; and iv) the use of SAR-based technologies for marine applications.