Oral Pharmaceutical Formulations Research Articles

Preparation, characterization, and in vitro cytogenotoxic evaluation of a novel dimenhydrinate-β-cyclodextrin inclusion complex.

Dimenhydrinate (DMH), used to alleviate motion sickness symptoms such as nausea, vomiting, dizziness, and vertigo, encounters limitations in oral pharmaceutical formulations due to its poor water solubility and bitter taste. Our research hypothesized that inclusion complexation with β-cyclodextrin (β-CD) might address these drawbacks while ensuring that the newly formed complexes exhibit no cytotoxic or genotoxic effects on peripheral blood mononuclear cells (PBMCs). Inclusion complexes were prepared using the kneading method and the solvent evaporation method. The phase solubility analysis, attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR), and differential scanning calorimetry (DSC) were conducted to evaluate the complexation efficacy and stability constant of the new binary systems. The results demonstrated that both methods provided complete and efficient complexation. Cytogenotoxic analysis, including the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) assay, alkaline comet assay, and cytokinesis-block micronucleus cytome (CBMN-cyt) assay, was conducted to assess the cytogenotoxic potential of DMH-β-CD inclusion complexes, a topic previously unexamined. No cytotoxic or genotoxic effects were observed within the concentration range of 36.36 to 109.09 ng/mL. Cell viability of treated PBMCs exceeded 85% for all tested concentrations. No significant increases in DNA strand breaks were observed at any dose, and tail intensity of all complexes remained lower or up to 2.2% higher than the negative control. Parameters indicating genotoxic effects, as well as cytotoxic and cytostatic potential in the CBMN-cyt assay, did not significantly differ from untreated controls. These results suggest that inclusion complexation with β-CD might be a safe and promising solution to overcome the limitations of poor solubility and unpleasant taste of DMH, potentially providing opportunities for new and improved oral pharmaceutical dosage forms.

Pharmaceutical Nanoplatforms Based on Self-nanoemulsifying Drug Delivery Systems for Optimal Transport and Co-delivery of siRNAs and Anticancer Drugs

Small interfering RNAs (siRNAs) have the ability to induce selective gene silencing, although siRNAs are vulnerable to degradation in vivo. Various active pharmaceutical ingredients (APIs) are currently used as effective therapeutics in the treatment of cancer. However, routes of administration are limited due to their physicochemical and biopharmaceutical properties. This research aimed to develop oral pharmaceutical formulations based on self-nanoemulsifying drug delivery systems (SNEDDS) for optimal transport and co-delivery of siRNAs related to cancer and APIs. Formulations were developed using optimal mixing design (Design-Expert 11 software) for SNEDDS loading with siRNA (water/oil emulsion), API (oil/water emulsion), and siRNA-API (multiphase water/oil/water emulsion). The final formulations were characterized physicochemically and biologically. The nanosystems less than 50 nm in size had a drug loading above 48 %. The highest drug release occurred at intestinal pH, allowing drug protection in physiological fluids. SNEDDS-siRNA-APIs showed a twofold toxicity effect than APIs in solution and higher transfection and internalization of siRNA in cancer cells with respect to free siRNAs. In the duodenum, higher permeability was observed with SNEDDS-API than with the API solution, as determined by ex-vivo fluorescence microscopy. The multifunctional formulation based on SNEDDS was successfully prepared, siRNA, hydrophobic chemotherapeutics (doxorubicin, valrubicin and methotrexate) and photosensitizers (rhodamine b and protoporphyrin IX) agents were loaded, using a chitosan-RNA core, and Labrafil® M 1944 CS, Cremophor® RH40, phosphatidylcholine shell, forming stable hybrid SNEDDS as multiphasic emulsion, suitable as co-delivery system with a potent anticancer activity.

Toward a greener multifunctional pharmaceutical excipient: in vivo safety evaluation of nanofibrillated cellulose from tobacco stalk

Tobacco stalk is a cellulose-rich material and a sustainable alternative to be applied as a plant-based nanofibrillated cellulose (NFC) source. NFC use has garnered attention in the development of oral pharmaceutical forms, despite concerns about its safety due to the adverse effects of nicotine on health. Therefore, we aimed at establishing the safety of NFC derived from tobacco stalk for its potential use as a novel pharmaceutical excipient, exploring its potential functions for tablet production. We conducted acute and subchronic oral toxicity tests in adult female Wistar rats. Initially, individual animals received sequential doses (175–5,000 mg·kg−1) for 24 hours followed by a careful observation of any toxic effects. Subsequently, 20 rats were divided into four groups for a subchronic assay, evaluating toxicity signs, body weight changes, hematological, biochemical, and histopathological parameters. No deaths or other clinical toxicity signs were observed in either the acute or the subchronic assays. We noticed a significant reduction in body weight gain (p < 0.05) after 14 days. We found statistical differences for hematological and biochemical parameters, unrelated to dosage. There were no observed toxic effects, and tobacco stalk ingestion did not adversely affect organ morphology in the histopathological evaluation. The oral administration of NFC at 5,000 mg·kg−1 per day for 28 days was well-tolerated by treated rats, with no reported deaths. In conclusion, NFC derived from tobacco stalk has shown to be a sustainable and safe alternative for use as an excipient at experimental doses, demonstrating compatibility with its proposed applications.

Food-grade polymers: A new vision in the controlled release of bioactive substances

Food-grade polymers are largely employed in food industry for a variety of purposes, including food preservation, texture modification and food packaging. They are considered safe for human consumption and are approved by regulatory bodies such as the FDA and EFSA. One of the most common uses of food-grade polymers is in food packaging. They are used to create packaging materials that are resistant to moisture, oxygen and to prevent contamination. Food- grade polymers are also used in the formulation of dietary supplements, fortified foods, and modified-release pharmaceuticals. They help improve the stability, shelf life and bioavailability of active ingredients. For example, specific polymers can be tailored to create controlled-release formulations, in which the active ingredient is released gradually over time, resulting in a more consistent and prolonged effect. In addition, food-grade polymers can be used to improve the texture and appearance of dietary supplements and oral pharmaceutical forms, mask unpleasant tastes and odors and making them more palatable to consumers. This paper overviews the application of food-grade polymers in the preparation of modified and targeted delivery systems for drugs and nutraceutical ingredients.

Ivermectin systemic availability in adult volunteers treated with different oral pharmaceutical formulations

Ivermectin (IVM) is currently approved as an antiparasitic agent for human use in the treatment of onchocerciasis, lymphatic filariasis, strongyloidiasis, scabies, and pediculosis. Recent findings indicate that IVM may reach other pharmacological targets, which accounts for its proven anti-inflammatory/immunomodulatory, cytostatic, and antiviral effects. However, little is known about the assessment of alternative drug formulations for human use. ObjectiveTo compare the systemic availability and disposition kinetics of IVM orally administered as different pharmaceutical formulations (tablet, solution, or capsule) to healthy adults. Experimental design/main findingsVolunteers were randomly assigned to 1 of 3 experimental groups and orally treated with IVM as either, a tablet, solution, or capsules at 0.4 mg/kg in a three-phase crossover design. Blood samples were taken as dried blood spots (DBS) between 2 and 48 h post-treatment and IVM was analyzed by HPLC with fluorescence detection. IVM Cmax value was higher (P < 0.05) after the administration of the oral solution compared to treatments with both solid preparations. The oral solution resulted in a significantly higher IVM systemic exposure (AUC: 1653 ng h/mL) compared to the tablet (1056 ng h/mL) and capsule (996 ng h/mL) formulations. The simulation of a 5-day repeated administration for each formulation did not show a significant systemic accumulation. ConclusionBeneficial effects against systemically located parasitic infections as well as in any other potential therapeutic field of IVM application would be expected from its use in the form of oral solution. This pharmacokinetic-based therapeutic advantage without the risk of excessive accumulation needs to be corroborated in clinical trials specifically designed for each purpose.

Composition-Property Relationships of pH-Responsive Poly[(2-vinylpyridine)-co-(butyl methacrylate)] Copolymers for Reverse Enteric Coatings.

The taste-masking of bitter-tasting active pharmaceutical ingredients is key to ensuring patient compliance when producing oral pharmaceutical formulations. This is generally achieved via the incorporation of pH-responsive, reverse enteric polymers, that prevent the dissolution of the formulation in the oral environment, but rapidly mediate it within the gastric environment. Reverse enteric polymers are commonly applied as coatings on oral dosage forms via spray atomisation (e.g., fluidised-bed spray coating), and generally exhibit the most efficient taste-masking. However, currently used reverse enteric coatings require high mass gains (% w/w) during coating to mediate taste-masking, and thereby exhibit delayed release within the gastric environment. Therefore, there remains a need for the development of new reverse enteric coatings, that can efficiently taste-mask at low mass gains and maintain rapid release characteristics within the gastric environment. Herein we report the synthesis and evaluation of a series of addition copolymers of 2-vinylpyridine and butyl methacrylate, methyl methacrylate and isobornyl methacrylate. The thermal, solubility, and water absorption properties of the copolymers were effectively tuned by altering the mol% fraction of the constitutive monomers. Based on their physical properties, selected copolymers were preliminarily evaluated for their compatibility with fluidised-bed spray coating, and effectiveness as taste-masking reverse enteric coatings. The copolymers poly[(2-vinylpyridine)-co-(butyl methacrylate)] (mol% ratio 40:60) and poly[(2-vinylpyridine)-co-(butyl methacrylate)-co-(methyl methacrylate)] (mol% ratio 40:50:10) were found to exhibit excellent taste-masking properties following fluidised-bed spray coating onto Suglets® sugar spheres. Suglets® bearing a film coating of either copolymer (5.2-6.5% w/w mass gain) were found to effectively impede the release of a model drug formulation for up to 72 h in a simulated salivary environment, and rapidly release it (<10 min) within a simulated gastric environment. The results demonstrated the potential of poly[(2-vinylpyridine)-co-(butyl methacrylate)] copolymers to form effectively taste-masked, reverse enteric dosage forms, and suggested that these copolymers may provide improved performance compared to currently available polymers.

Evaluation of Usnea barbata (L.) Weber ex F.H. Wigg Extract in Canola Oil Loaded in Bioadhesive Oral Films for Potential Applications in Oral Cavity Infections and Malignancy.

Usnea lichens are known for their beneficial pharmacological effects with potential applications in oral medicine. This study aims to investigate the extract of Usnea barbata (L.) Weber ex F.H. Wigg from the Călimani Mountains in canola oil as an oral pharmaceutical formulation. In the present work, bioadhesive oral films (F-UBO) with U. barbata extract in canola oil (UBO) were formulated, characterized, and evaluated, evidencing their pharmacological potential. The UBO-loaded films were analyzed using standard methods regarding physicochemical and pharmacotechnical characteristics to verify their suitability for topical administration on the oral mucosa. F-UBO suitability confirmation allowed for the investigation of antimicrobial and anticancer potential. The antimicrobial properties against Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27353, Candida albicans ATCC 10231, and Candida parapsilosis ATCC 22019 were evaluated by a resazurin-based 96-well plate microdilution method. The brine shrimp lethality assay (BSL assay) was the animal model cytotoxicity prescreen, followed by flow cytometry analyses on normal blood cells and oral epithelial squamous cell carcinoma CLS-354 cell line, determining cellular apoptosis, caspase-3/7 activity, nuclear condensation and lysosomal activity, oxidative stress, cell cycle, and cell proliferation. The results indicate that a UBO-loaded bioadhesive film’s weight is 63 ± 1.79 mg. It contains 315 µg UBO, has a pH = 6.97 ± 0.01, a disintegration time of 124 ± 3.67 s, and a bioadhesion time of 86 ± 4.12 min, being suitable for topical administration on the oral mucosa. F-UBO showed moderate dose-dependent inhibitory effects on the growth of both bacterial and fungal strains. Moreover, in CLS-354 tumor cells, F-UBO increased oxidative stress, diminished DNA synthesis, and induced cell cycle arrest in G0/G1. All these properties led to considering UBO-loaded bioadhesive oral films as a suitable phytotherapeutic formulation with potential application in oral infections and neoplasia.

The Role of the Pharmacist in Selecting the Best Choice of Medication Formulation in Dysphagic Patients.

Usually, the administration of drugs by feeding tube in dysphagic patients involves handling of marketing licenses outside their term, due to the lack of suitable formulations. This circumstance has put health professionals in the dilemma of choosing the formulation whose manipulation possibly does not alter the effectiveness of the drug. In this regard, a practical guide providing indications on the prescription, handling, and administration of drugs through enteral feeding tube could be of paramount utility. For this purpose, we have considered the 1047 solid oral pharmaceutical forms included in the formulary of San Paolo Hospital (Savona, Italy). From our analysis, it emerges that 95% of medicinal products are worryingly used off-label and 40% have to be managed by the hospital pharmacists without having suitable indications by either the manufacturers or by literature studies. To fill this gap, we have compiled a detailed table containing missing indications derived from pharmacist expertise and evidence-based practices, with the aim that the sharing of our procedures will contribute to make uniform pharmacological therapies from one hospital to another. This study will allow doctors to have easy access to information on drugs that can be prescribed and nurses to become familiar only with the pharmaceutical forms that can be administered.

Quantifying the Value of Introducing an Oral Drug Delivery Option for Edaravone: A Review of Analyses Evaluating the Economic Impact of Oral versus Intravenous Formulations.

BackgroundDrug formulation and route of administration can have an impact on not only patients’ quality of life and disease outcomes but also costs of care. It is essential for decision makers to use appropriate economic modeling methods to guide drug coverage policies and to support patients’ decision-making.PurposeTo illustrate key cost considerations for decision makers in economic evaluation of innovative oral formulations as alternatives to intravenous medication.Materials and MethodsA structured literature review was conducted using the PubMed database to examine methods used for quantifying the economic impact of introducing a new oral pharmaceutical formulation as an alternative to intravenous medication. To illustrate the methods described in this review, a cost-minimization analysis was conducted to quantify the impact of introducing an oral formulation of a medication originally developed as an intravenous treatment for amyotrophic lateral sclerosis.ResultsWe identified 14 published evaluations of oral and intravenous formulations from 10 countries across a variety of disease areas. The identified studies used cost-effectiveness (n=10), cost-minimization (n=2), and cost-calculation (n=2) modeling approaches. All but one (13/14) reported outcomes from payers’ perspective, while societal perspectives were also incorporated in 3 of the reviewed evaluations. One study estimated costs from a public hospital’s perspective. Only a subset of the identified studies accounted for the effects of safety (n=6) or efficacy (n=8) differences on treatment costs when estimating the costs of a formulation choice. Many studies that omitted these aspects did not include rationales for their decisions.ConclusionWe found significant design variations in published models that estimated the impact of an additional formulation option on the treatment costs to payers and the society. Models need to be accompanied with clear descriptions on rationales for their time horizons and assumptions on how different formulations may affect healthcare costs from the selected perspectives.

Taste Masking of Pharmaceutical Formulations: Review on Technologies, Recent Trends and Patents

The majority of active pharmaceutical ingredients (APIs) found in oral dosage forms have unpleasant or obnoxious taste. Taste is one of the important parameters which governs patient compliance and also decides the success of a product in the market. Undesirable taste or the bitter taste is a major challenge that formulation scientist faces with many drugs. Hence, oral administration of bitter drugs is a big challenge, especially for pediatric patients. This article focuses on various tastes masking techniques by which the characteristics of the dosage form are improved and better patient compliance can be achieved. The article also discusses various recent taste masking evaluation techniques used in oral pharmaceutical formulations. The pharmaceutical companies are now engaged in developing novel techniques to overcome the problem of taste masking by numerous patents filed for taste masking. Lists of patents for taste masking are discussed and how these patents overcome the limitations of conventional approaches of taste masking is also reviewed. The present article also emphasizes various patented platform technologies based on different techniques used for taste masking. The important features and principles involved in taste-masking approaches of various patented technologies are also discussed. A better understanding of these new patents and patented technologies will help formulation scientists to select the most suited technology for development of new products with improved taste.

Improved solubility of lornoxicam by inclusion into SBA-15: Comparison of loading methods

An increasing proportion of new medicinal substances are poorly soluble in water. Adsorption on mesoporous silicas increases their bioavailability when administered orally. Loading method determines adsorption either on the surface in crystalline state or inside the mesopores in amorphus form. The aim of this study was to compare two methods (adsorption equilibrium and solvent evaporation) of lornoxicam adsorption on SBA-15 and APTES-modified SBA-15 in terms of drug adsorption site. Additionally, we investigated the drug release profiles at different pH and cytotoxicity of the analysed mesoporous materials. The materials were characterized by a number of physicochemical techniques including X-ray diffraction, nitrogen adsorption/desorption techniques, differential scanning calorimetry, thermogravimetric analysis, scanning and transmission electron microscopy, infrared spectroscopy and 1H NMR. Lornoxicam was loaded on the studied materials and released in the media (HCl pH 1.2, phosphate buffers pH 6.8 and 7.4). The cytotoxicity assays of APTES-modified SBA-15 were performed on CaCo-2 human colon cancer cell line. We proved that adsorption equilibrium method is a more advantageous method of loading. It ensures drug adsorption in an amorphous state inside the mesopores. The solvent evaporation method, despite a greater amount of loaded drug, results in drug adsorption in a crystalline state on the silica surface. In drug release studies a greater amount of lornoxicam is released from modified materials compared to crystalline lornoxicam. Cytotoxicity study proved the safety of APTES-modified silica. We concluded that APTES-modified SBA-15 is applicable as an effective and non-toxic carrier for the poorly soluble drug lornoxicam. The adsorption equilibrium method should be the preferred loading method. It enables the adsorption of sparingly soluble substances inside the mesoproes and enhances bioavailability of oral pharmaceutical forms.

Encapsulation of Active Pharmaceutical Ingredients in Lipid Micro/Nanoparticles for Oral Administration by Spray-Cooling.

Nanoencapsulation via spray cooling (also known as spray chilling and spray congealing) has been used with the aim to improve the functionality, solubility, and protection of drugs; as well as to reduce hygroscopicity; to modify taste and odor to enable oral administration; and many times to achieve a controlled release profile. It is a relatively simple technology, it does not require the use of low-cost solvents (mostly associated to toxicological risk), and it can be applied for lipid raw materials as excipients of oral pharmaceutical formulations. The objective of this work was to revise and discuss the advances of spray cooling technology, with a greater emphasis on the development of lipid micro/nanoparticles to the load of active pharmaceutical ingredients for oral administration.

Construction of Chitosan/Alginate Nano-Drug Delivery System for Improving Dextran Sodium Sulfate-Induced Colitis in Mice.

(1) Background: In the treatment of ulcerative colitis (UC), accurate delivery and release of anti-inflammatory drugs to the site of inflammation can reduce systemic side effects. (2) Methods: We took advantage of this goal to prepare resveratrol-loaded PLGA nanoparticles (RES-PCAC-NPs) by emulsification solvent volatilization. After layer-by-layer self-assembly technology, we deposited chitosan and alginate to form a three-layer polyelectrolyte film. (3) Results: It can transport nanoparticles through the gastric environment to target inflammation sites and slowly release drugs at a specific pH. The resulting RES-PCAC-NPs have an ideal average diameter (~255 nm), a narrow particle size distribution and a positively charged surface charge (~13.5 mV). The Fourier transform infrared spectroscopy showed that resveratrol was successfully encapsulated into PCAC nanoparticles, and the encapsulation efficiency reached 87.26%. In addition, fluorescence imaging showed that RES-PCAC-NPs with positive charges on the surface can effectively target and accumulate in the inflammation site while continuing to penetrate downward to promote mucosal healing. Importantly, oral RES-PCAC-NPs treatment in DSS-induced mice was superior to other results in significantly improved inflammatory markers of UC. (4) Conclusions: Our results strongly prove that RES-PCAC-NPs can target the inflamed colon for maximum efficacy, and this oral pharmaceutical formulation can represent a promising formulation in the treatment of UC.

Identification of related impurities in an oral pharmaceutical formulation of tebipenem pivoxil using ultra-high-performance liquid chromatography/electrospray ionization quadrupole time-of-flight tandem mass spectrometry.

Tebipenem pivoxil (TBPM-PI) has been developed as the first oral carbapenem drug in the world to treat otolaryngological and respiratory infections in pediatric patients. Due to its structural properties and external factors, some related impurities, which may cause side effects in patients, might be formed during the synthesis and storage of TBPM-PI. It was vital to rapidly separate and identify the related impurities to guarantee the safe use of TBPM-PI. A method using ultra-high-performance liquid chromatography (UHPLC) coupled with quadrupole time-of-flight tandem mass spectrometry (QTOF-MS/MS) was developed to separate and detect TBPM-PI and related impurities in an oral pharmaceutical formulation. LC/MS and MS/MS spectra of these compounds in the formulation were acquired to confirm their elemental compositions and propose their structures based on LC/MS data and fragmentation pathways of available reference substances. LC/MS parameters and MS/MS fragmentation pathways of reference substances of TBPM-PI and related impurities were summarized in detail. Based on this, a total of 23 related impurities were found and characterized in the oral pharmaceutical formulation. Eight of these were verified by comparison with reference substances and the structures of the other 15 were proposed for the first time. In addition, four of these compounds were produced by the reaction of excipients and pre-existing related impurities. A UHPLC/QTOF-MS method was established and used for the separation and identification of 23 related impurities in a TBPM-PI oral pharmaceutical formulation. Moreover, it was proved that new related impurities could be produced by the reaction of excipients in the pharmaceutical formulation and related impurities in the corresponding active pharmaceutical ingredient (API).

Improvement of antioxidant activity of oregano (Origanum vulgare L.) with an oral pharmaceutical form

Aging-related diseases can be triggered by multiple factors such as oxidative stress. Oxidative stress is an imbalance between free radicals and antioxidants, so today, compounds capable of reducing or neutralizing free radicals are being studied for a therapeutic use. Origanum vulgare L. is a traditional medicinal plant used for a wide number of health problems due to its antimicrobial, carminative and antioxidant activities. However, when administered orally, gastrointestinal digestion can modify some of therapeutical properties. To avoid this, two different solid oral formulations have been designed for an O. vulgare extract evaluating their antioxidant behaviours in vitro and in vivo after a simulation of gastrointestinal digestion. The results showed that the divided powder has a lower antioxidant activity both in vitro and in vivo than the encapsulated extract. The quantitative difference of polyphenols found on HPLC-DAD (especially luteolin, apigenin and caffeic acid) may explain the differences in pharmacological activity. Thus, we propose that the best form to administrate O. vulgare extracts to maintain the antioxidant properties is the encapsulated form, that is, two capsules of 250 mg of a hydroalcoholic extract of O. vulgare with a minimum of 33 % of rosmarinic acid as a daily dose.

In vitro cytotoxic and toxicological activities of ethanolic extract of Kaempferia galanga Linn. and its active component, ethyl-p-methoxycinnamate, against cholangiocarcinoma

ObjectiveTo evaluate the cytotoxic, apoptotic, mutagenic and immunomodulatory activities of Kaempferia galanga Linn. (KG) extract and ethyl-p-methoxycinnamate (EPMC) in vitro. MethodsThe present study investigated the cytotoxic [using the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide test], apoptotic (using a mitochondrial membrane potential assay), mutagenic (using a micronucleus test) and immunomodulatory (using flow cytometry) activities of the ethanolic extract of KG and its bioactive component, EPMC, against two cholangiocarcinoma (CCA) cell lines, CL-6 and HuCCT1, and one normal human cell line, OUMS-36T-1F. ResultsBoth KG extract and EPMC exhibited moderate cytotoxic activity against both CCA cells. The cytotoxic activity was supported by their concentration-dependent induction of apoptosis. CL-6 was most sensitive (3–4 fold) and selective to 5-fluorouracil (5-FU), compared with KG extract and EPMC [median half inhibiting concentration (IC50) and selectivity index (SI) were 23.01 μg/mL and 17.32; 78.41 μg/mL and 4.44; 100.76 μg/mL and 2.20, respectively for 5-FU vs. KG extract vs. EPMC]. HuCCT1 was relatively more sensitive and selective to 5-FU and EPMC than KG extract [median IC50 and SI were 66.03 μg/mL and 6.04; 60.90 μg/mL and 3.65; 156.60 μg/mL and 2.23, respectively for 5-FU vs. EPMC vs. KG extract]. EPMC produced relatively potent cytotoxic activity against polymorphonuclear cells (IC50 = 92.20 μg/mL). KG extract and EPMC exhibited concentration-dependent mutagenic activity, as well as inhibition of tumor necrosis factor-α and interleukin-6. ConclusionConsidering cytotoxic, apoptotic, immunomodulatory and mutagenic activities, further development of KG as a drug candidate is likely to focus on the oral pharmaceutical formulation of a standardized KG extract rather than isolated compounds.

Development of oral pharmaceutical formulation of standardized crude ethanolic extract of Atractylodes lancea (Thunb) DC.

Development of oral pharmaceutical formulation of standardized crude ethanolic extract of Atractylodes lancea (Thunb) DC.

Preclinical Toxicology and Anticholangiocarcinoma Activity of Oral Formulation of Standardized Extract of Zingiber Officinale.

Cholangiocarcinoma (CCA) remains a significant public health problem in Thailand. New effective and safe drugs are urgently needed. Zingiber officinale Roscoe (ZO) is a widely used medicinal plant for the treatment of several ailments, and the animal study suggests a potential anti-CCA activity. The present study aimed to develop the oral formulation of standardized extract of ZO and investigate toxicological profiles (acute, repeated dose, and chronic toxicity), including anti-CCA activity of the ZO formulation. The oral pharmaceutical formulation of the standardized ZO extract was successfully developed with an acceptable level of contamination and physicochemical and pharmaceutical properties. Acute, subacute, and chronic toxicity tests were conducted in healthy Sprague Dawley rats according to the OECD guidelines. The results showed no evidence of toxicity and death in the acute and subacute toxicity testing with the maximum tolerated dose (MTD) of 5000 and 2000 mg/kg body weight, respectively. Chronic toxicity revealed MTD and No-Observed-Adverse-Effect level (NOAEL) of 1000 mg/kg body weight. The anti-CCA activity was evaluated in CCA-xenografted mouse model. The formulated ZO powder was fed to animals daily for 30 days. Significant anti-CCA activity on tumor growth inhibition and prolongation of survival time were demonstrated at the high (2000 mg/kg body weight) and moderate (1000 mg/kg body weight) dose levels. Further investigation to elucidate molecular targets of action of ZO against CCA cells is encouraged.

Modern pediatric formulations of the soft candies in the form of a jelly: determination of metoclopramide content and dissolution

In pediatrics, it is crucial to ameliorate the unpleasant taste of oral pharmaceutical formulations in order to facilitate patient compliance. Scientists’ attempt to develop modern products for children is included among the new trends in pharmaceutical technology. Designing the preparation procedures and selecting the age-appropriate dosage form should be based on a benefit-risk approach, taking into account safety, efficacy, ease of use and accessibility to the patient. Part of this process should examine the necessity for taste masking, considering organoleptic and physicochemical properties of the active pharmaceutical ingredient. This research describes the incorporation of metoclopramide hydrochloride in the form of a soft candy (jelly) containing pomegranate juice. The low cost excipients and the ease of preparation are such characteristics that qualify the proposed technique as one of the alternative methods for modern drug formulations. At the same time, metoclopramide is quantitatively determined by developing a reverse phase HPLC method. The method is accurate (%RSD = 2.63, %mean recovery = 100.75) and can be used for routine analysis. The stability of metoclopramide was satisfactory after 6 months of storage (recovery 103.43%). Dissolution of the drug exceeded 92%. The proposed formulation enclosing metoclopramide in a jelly is modern, palatable and can be administered to children.

Liquid antisolvent precipitation: an effective method for ocular targeting of lutein esters.

BackgroundLutein ester (LE) is an important carotenoid fatty acid ester. It is a form in which lutein is present in nature and is produced by free non-esterification and fatty acid esterification. LE is one of the safe sources of lutein. Increasing lutein intake can prevent and treat age-related macular degeneration. In addition, it can effectively inhibit gastric cancer, breast cancer, and esophageal cancer. However, the poor aqueous solubility of LE has impeded its clinical applications.ObjectiveThe objective of this study was to prepare lutein ester nanoparticles (LE-NPs) by liquid antisolvent precipitation techniques to improve the bioavailability of LE in vivo and improve eye delivery efficiency.Materials and methodsThe physical characterization of LE-NPs was performed, and their in vitro dissolution rate, in vitro antioxidant capacity, in vivo bioavailability, tissue distribution, and ocular pharmacokinetics were studied and evaluated.ResultsThe LE freeze-dried powder obtained under the optimal conditions possessed a particle size of ~164.1±4.3 nm. The physical characterization analysis indicated the amorphous form of LE-NPs. In addition, the solubility and dissolution rate of LE-NPs in artificial gastric juice were 12.75 and 9.65 times that of the raw LE, respectively. The bioavailability of LE-NPs increased by 1.41 times compared with that of the raw LE. The antioxidant capacity of LE-NPs was also superior to the raw LE. The concentration of lutein in the main organs of rats treated with the LE-NPs was higher than that in rats treated with the raw LE. The bioavailability of LE-NPs in rat eyeballs was found to be 2.34 times that of the original drug.ConclusionLE-NPs have potential application as a new oral pharmaceutical formulation and could be a promising eye-targeted drug delivery system.