Optomechanical Effects Research Articles

Direct laser writing of curved SERS for light-guided enhancement

Flexible SERS substrates, typically used on irregular surfaces, have unexplored optomechanical effects that could enhance performance. We developed a micromechanically bending structure, i.e. microbender, to study how bending affects SERS substrates’ performance. Optical simulations of nanopillar arrays on micro-curved surfaces showed a 25–134 % improvement in mean-field localization at the pillar tips for arrays with pillar diameters of 0.4–1 μm, pitches of 0.5–0.8 μm, and heights of 0.5–4.5 μm. Raman measurements showed that SERS intensity increases when in a curved state due to enhanced light scattering, guiding, and field localization. A curved array of 6 μm tall pillars (0.5 μm diameter, 1 μm spacing) produced Raman intensities similar to dense single-voxel arrays with shorter 0.8 μm pillars (0.2 μm diameter, 0.2 μm gaps) in the planar state. This finding suggests that low resolution fabrication technologies can produce curved SERS substrates with similar performance to high resolution planar SERS, offering an alternative to the current “smaller is better” trend through post-fabrication manipulation.

Optical Actuation of Nanoparticle-Loaded Liquid-Liquid Interfaces for Active Photonics.

Liquid-liquid interfaces hold the potential to serve as versatile platforms for dynamic processes, due to their inherent fluidity and capacity to accommodate surface-active materials. This study explores laser-driven actuation of liquid-liquid interfaces with and without loading of gold nanoparticles and further exploits the laser-actuated interfaces with nanoparticles for tunable photonics. Upon laser exposure, gold nanoparticles were rearranged along the interface, enabling the reconfigurable, small-aperture modulation of light transmission and the tunable lensing effect. Adapting the principles of optical and optothermal tweezers, we interpreted the underlying mechanisms of actuation and modulation as a synergy of optomechanical and optothermal effects. Our findings provide an analytical framework for understanding microscopic interfacial behaviors, contributing to potential applications in tunable photonics and interfacial material engineering.

Control of quality factor of atomic force microscopy cantilever by cavity optomechanical effect

The effective quality factor of the cantilever plays a fundamental role in dynamic mode atomic force microscopy. Here we present a technique to modify the quality factor of an atomic force microscopy cantilever within a Fabry–Perot optical interferometer. The experimental setup uses two separate laser sources to detect and excite the oscillation of the cantilever. While the intensity modulation of the excitation laser drives the oscillation of the cantilever, the average intensity can be used to modify the quality factor via optomechanical force without changing the fiber-cantilever cavity length. The technique enables users to optimize the quality factor for different types of measurements without influencing the deflection measurement sensitivity. An unexpected frequency shift was observed and modelled as temperature dependence of the cantilever’s Young’s modulus, which was validated using finite element simulation. The model was used to compensate for the thermal frequency shift. The simulation provided relations between optical power, temperature, and frequency shift.

Molecular optomechanics in the anharmonic regime: from nonclassical mechanical states to mechanical lasing

Cavity optomechanics aims to establish optical control over vibrations of nanoscale mechanical systems, to heat, cool or to drive them toward coherent, or nonclassical states. This field was recently extended to encompass molecular optomechanics: the dynamics of THz molecular vibrations coupled to the optical fields of lossy cavities via Raman transitions. The molecular platform should prove suitable for demonstrating more sophisticated optomechanical effects, including engineering of nonclassical mechanical states, or inducing coherent molecular vibrations. We propose two schemes for implementing these effects, exploiting the strong intrinsic anharmonicities of molecular vibrations. First, to prepare a nonclassical mechanical state, we propose an incoherent analogue of the mechanical blockade, in which the molecular anharmonicity and optical response of hybrid cavities isolate the two lowest-energy vibrational states. Secondly, we show that for a strongly driven optomechanical system, the anharmonicity can suppress the mechanical amplification, shifting and reshaping the onset of coherent mechanical oscillations. Our estimates indicate that both effects should be within reach of existing platforms for Surface Enhanced Raman Scattering.

Key Role of Asymmetric Photothermal Effect in Selectively Chiral Switching of Plasmonic Dimer Driven by Circularly Polarized Light.

Strong interaction between circularly polarized light and chiral plasmonic nanostructures can enable controllable asymmetric photophysical processes, such as selective chiral switching of a plasmonic nanorod-dimer. Here, we uncover the underlying physics that governs this chiral switching by theoretically investigating the interplay between asymmetric photothermal and optomechanical effects. We find that the photothermally induced local temperature rises could play a key role in activating the dynamic chiral configurations of a plasmonic dimer due to the temperature-sensitive molecular linkages located at the gap region. Importantly, different temperature rises caused by the opposite handedness of light could facilitate selective chiral switching of the plasmonic dimer driven by asymmetric optical torques. Our analyses on the wavelength-dependent selectively chiral switching behaviors are in good agreement with the experimental observations. This work contributes to a comprehensive understanding of the physical mechanism involved in the experimentally designed photoresponsive plasmonic nanosystems for practical applications.

Ultrahigh-sensitivity fiber-tip microcavity ultrasonic sensor based on optomechanical effect

An ultrahigh-sensitivity fiber-tip cavity ultrasonic sensor based on optomechanical effect fabricated by Two-photon Polymerization (TPP) Technology is presented. The microcavity is based on all-polymer material with the structure of three support columns and two micro-discs, and one micro-disc with one round hole. Experiment results show that the sensor has an ultrahigh sensitivity which is 889 times as big as that of the commercial acoustic sensor. It has a good frequency response within the frequency range of 52.19 KHz-384.6 KHz. The sensor exhibits the inherent advantages of small size, compact structure, easy of fabrication, high sensitivity and wide band acoustic response, and is expected to have application in ultrasonic sensing and imaging.

Hybrid cavity-antenna architecture for strong and tunable sideband-selective molecular Raman scattering enhancement.

Plasmon resonances at the surface of metallic antennas allow for extreme enhancement of Raman scattering. Intrinsic to plasmonics, however, is that extreme field confinement lacks precise spectral control, which would hold great promise in shaping the optomechanical interaction between light and molecular vibrations. We demonstrate an experimental platform composed of a plasmonic nanocube-on-mirror antenna coupled to an open, tunable Fabry-Perot microcavity for selective addressing of individual vibrational lines of molecules with strong Raman scattering enhancement. Multiple narrow and intense optical resonances arising from the hybridization of the cavity modes and the plasmonic broad resonance are used to simultaneously enhance the laser pump and the local density of optical states, and are characterized using rigorous modal analysis. The versatile bottom-up fabrication approach permits quantitative comparison with the bare nanocube-on-mirror system, both theoretically and experimentally. This shows that the hybrid system allows for similar SERS enhancement ratios with narrow optical modes, paving the way for dynamical backaction effects in molecular optomechanics.

Optomechanical effects caused by non-zero field quantities in multiple evanescent waves.

Evanescent waves, with their high energy density, intricate local momentum, and spatial distribution of spins, have been the subject of extensive recent study. These waves offer promising applications in near-field particle manipulation. Consequently, it becomes imperative to gain a deeper understanding of the impacts of scattering and gradient forces on particles in evanescent waves to enhance and refine the manipulation capabilities. In this study, we employ the multipole expansion theory to present analytical expressions for the scattering and gradient forces exerted on an isotropic sphere of any size and composition in multiple evanescent waves. The investigation of these forces reveals several unusual optomechanical phenomena. It is well known that the scattering force does not exist in counter-propagating homogeneous plane waves. Surprisingly, in multiple pairs of counter-propagating evanescent waves, the scattering force can arise due to the nonzero orbital momentum (OM) density and/or the curl part of the imaginary Poynting momentum (IPM) density. More importantly, it is found that the optical scattering force can be switched on and off by simply tuning the polarization. Furthermore, optical forces typically vary with spatial position in an interference field. However, in the interference field generated by evanescent waves, the gradient force becomes a spatial constant in the propagating plane as the particle's radius increases. This is attributed to the decisive role of the non-interference term of the electromagnetic energy density gradient. Our study establishes a comprehensive and rigorous theoretical foundation, propelling the advancement and optimization of optical manipulation techniques harnessed through multiple evanescent waves. Specifically, these insights hold promise in elevating trapping efficiency through precise control and manipulation of optical scattering and gradient forces, stimulating further explorations.

Thermo-optomechanically induced optical frequency comb in a whispering-gallery-mode resonator.

We present a theoretical study that combines thermal and optomechanical effects to investigate their influences on the formation of the optical frequency comb (OFC) in whispering-gallery-mode (WGM) microcavities. The results show that the cut-off order and center frequency of OFC affected by thermal effects exhibit an overall redshift by varying the power and detuning of the pump field, which provides the possibility of tuning the offset frequency of OFC. Our study demonstrates a method to characterize the effect on the generation of OFC and the tuning of its offset frequency in a WGM resonator with opto-thermo-mechanical properties and pave the way for the future development of OFC in thermo-optomechanical environments.

Applying the angular spectrum representation to calculate the optical force density generated in dielectrics by tightly focused laser beams

The Angular Spectrum Representation (ASR) is applied to describe semi-analytically the optical force densities acting on linear dielectric media when a quasi-monochromatic tightly focused Gaussian beam is applied. This method is seen to be inherently faster than conventional finite-difference schemes. Numerical simulations of the optical force densities were also performed and found to be in agreement with the literature, providing a complementary tool for the study of opto-mechanical effects in matter.

Giant optomechanical spring effect in plasmonic nano- and picocavities probed by surface-enhanced Raman scattering

Molecular vibrations couple to visible light only weakly, have small mutual interactions, and hence are often ignored for non-linear optics. Here we show the extreme confinement provided by plasmonic nano- and pico-cavities can sufficiently enhance optomechanical coupling so that intense laser illumination drastically softens the molecular bonds. This optomechanical pumping regime produces strong distortions of the Raman vibrational spectrum related to giant vibrational frequency shifts from an optical spring effect which is hundred-fold larger than in traditional cavities. The theoretical simulations accounting for the multimodal nanocavity response and near-field-induced collective phonon interactions are consistent with the experimentally-observed non-linear behavior exhibited in the Raman spectra of nanoparticle-on-mirror constructs illuminated by ultrafast laser pulses. Further, we show indications that plasmonic picocavities allow us to access the optical spring effect in single molecules with continuous illumination. Driving the collective phonon in the nanocavity paves the way to control reversible bond softening, as well as irreversible chemistry.

Optomechanical Heating and Cooling via Tip-Enhanced Raman Scattering in Epsilon-Near-Zero Medium

Media with the dielectric permittivityclose to zero (epsilon-near-zero or ENZ) maintain conditions for enhanced light-matter interactions. In this paper, we propose to use these media to enhance the optomechanical coupling of vibrational excitations of the medium with the optical near-field of the nanoantenna. It is shown that the ENZ medium significantly increases the optically induced decay rate of a vibration, which can be used for cooling (when the incident light frequency is less than the ENZ frequency) or heating (when the incident light frequency is greater than the ENZ frequency). Due to the proximity of the refractive index to zero as well, oscillations of the polarization of the medium are coherent, which further enhances the optomechanical effects. Analytical expressions are obtained for the optical shift of the resonance and the induced decay rate.

High-precision angular rate detection based on an optomechanical micro hemispherical shell resonator gyroscope.

Cavity optomechanics with picometer displacement measurement resolution has shown vital applications in high-precision sensing areas. In this paper, an optomechanical micro hemispherical shell resonator gyroscope (MHSRG) is proposed, for the first time. The MHSRG is driven by the strong opto-mechanical coupling effect based on the established whispering gallery mode (WGM). And the angular rate is characterized by measuring the transmission amplitude changing of laser coupled in and out from the optomechanical MHSRG based on the dispersive resonance wavelength shift and/or dissipative losses varying. The detailed operating principle of high-precision angular rate detection is theoretically explored and the fully characteristic parameters are numerically investigated. Simulation results show that the optomechanical MHSRG can achieve scale factor of 414.8 mV/ (°/ s) and angular random walk of 0.0555 °/ h1/2 when the input laser power is 3 mW and resonator mass is just 98 ng. Such proposed optomechanical MHSRG can be widely used for chip-scale inertial navigation, attitude measurement, and stabilization.

Optomechanical effects in nanocavity-enhanced resonant Raman scattering of a single molecule

In this article, we address the optomechanical effects in surface-enhanced resonant Raman scattering (SERRS) from a single molecule in a nano-particle on mirror (NPoM) nanocavity by developing a quantum master equation theory, which combines macroscopic quantum electrodynamics and electron-vibration interaction within the framework of open quantum system theory. We supplement the theory with electromagnetic simulations and time-dependent density functional theory calculations in order to study the SERRS of a methylene blue molecule in a realistic NPoM nanocavity. The simulations allow us not only to identify the conditions to achieve conventional optomechanical effects, such as vibrational pumping, non-linear scaling of Stokes and anti-Stokes scattering, but also to discovery distinct behaviors, such as the saturation of exciton population, the emergence of Mollow triplet side-bands, and higher-order Raman scattering. All in all, our study might guide further investigations of optomechanical effects in resonant Raman scattering.

Cavity Optomechanics with Anderson-Localized Optical Modes.

Confining photons in cavities enhances the interaction between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes estimated to be below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed g_{o}/2π∼200 kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our Letter constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with a multitude of mutually coupled degrees of freedom.

Nonlinearity in optomechanical microresonators –phenomena, applications, and future

Optomechanical microresonators have received considerable attention in recent years because of their ability to realize strong light-matter interactions in both classical and quantum regimes and support various applications, e.g., sensing and constructing optical devices. Light-matter interactions in optomechanical microresonators enable a variety of nonlinear phenomena, which can significantly enhance the precision of sensing, the efficiency of communication, and the capabilities of quantum information processing, such as quantum state reconstruction. In this perspective, we first summarize optomechanical nonlinear phenomena in classical regimes (e.g., bistability, chaos, solitons) and quantum regimes (e.g., phonon lasing, optomechanically induced transparency). In addition, the application progress of nonlinear optomechanical effects in classical and quantum systems is reviewed, including high-sensitivity measurement, quantum state reconstruction, photon blockade, and microwave-optical conversion, etc. Finally, we provide new insights into future developments.

Optical Inline-Sagnac Current Sensor, Part I: Theory

A study is made of the optical inline-Sagnac interferometer current sensor/transducer with active phase modulation and with spun polarization maintaining fiber. A brief review of the common sensor types is made to give context to the discussion of the optical inline-Sagnac current sensor theory. A new discussion is made of the limitations of the optical inline-Sagnac interferometer current sensor caused by the spun polarization maintaining fiber, the polarizing fiber design, and the temperature effects of each type of fiber. These combined temperature effects limit the sensor to a practical scale factor temperature sensitivity range of about 80 to 200 ppm/°C. The fiber component optical-wavelength effects require a broad-band light source to have a wavelength stability of <0.65 nm to achieve a ±0.1% sensor scale factor stability. The opto-mechanical effects from available spun polarization maintaining fibers limit the measurement head to diameters >30 mm. The transit-time of the light through the sensor is the ultimate bandwidth limit for the device. However, most practical sensors have −3 dB bandwidths >20 kHz. In utility applications the isolation of the sensor to nearby currents is estimated to be −96 dB.

Nonlinear optical effects and optomechanical oscillations in hollow Whispering Gallery Mode microresonators: Coexistence, suppression, amplification and route to chaos

Whispering Gallery Mode (WGM) hollow microcavities turn out to be the site of an extremely rich and complex phenomenological scenario when pumped with a continuous-wave laser source. The coexistence of numerous non-linear and optomechanical effects have been reviewed in this paper. In our previous works we have investigated and described non-linear emissions as the stimulated Brillouin and Raman scattering, the degenerated and non-degenerated Kerr effects, such as four wave mixing (FWM). These effects happened concomitantly to parametric optomechanical oscillations which are the consequence of the radiation pressure. We have confirmed the regenerative oscillation of acoustic eigenmodes of the cavity leading to parametric instabilities and the activation of optomechanical chaotic oscillations. Finally, we have demonstrated that the blue-side excitation of WGM resonances lead to the chaos transition with a spectral evolution depending on the cavity size.

Dynamics of Nano-Particles Inside an Optical Cavity in the Quantum Regime

We investigate the optomechanical effect on a single nano-particle inside an optical cavity, by deriving the optical forces acting on the nano-particle by the cavity from quantum theory. We obtain the steady state of the system and found that the force contains three terms associated with the gradient force, the back-action force resulting from the intra-cavity photon energy change, as well as the reactive force associated with the coupling between the external field and the cavity. Moreover, we solve the dynamical system for a dielectric particle in a small mode volume cavity, which is characterized by a quasi-periodic pattern. These results are important for understanding the control of various types of levitated nano-particles through optomechanical coupling.

Optical pulling and pushing forces via Bloch surface waves

For flexible tailoring of optical forces, as well as for extraordinary optomechanical effects, additional degrees of freedom should be introduced into a system. Here, we demonstrate that photonic crystals are a versatile platform for optical manipulation due to both Bloch surface waves (BSWs) and the complex character of the reflection coefficient paving a way for controlled optomechanical interactions. We demonstrate enhanced pulling and pushing transversal optical forces acting on a single dipolar bead above a one-dimensional photonic crystal due to directional excitation of BSWs. Our results demonstrate angle- or wavelength-assisted switching between BSW-induced optical pulling and pushing forces. Easy to fabricate for any desired spectral range, photonic crystals are shown to be prospective for precise optical sorting of nanoparticles, which are difficult to sort with conventional optomechanical methods. Our approach opens opportunities for novel, to the best of our knowledge, optical manipulation schemes and platforms, and enhanced light-matter interaction in optical trapping setups.