Optical Trapping Research Articles

Optical trapping using quasi-bound state in the continuum of photonic crystal slab

Optical trapping using quasi-bound state in the continuum of photonic crystal slab

Precise Nanoparticle Manipulation Using Femtosecond Laser Trapping.

Optical tweezers use strongly focused light for trapping, characterizing, and manipulating objects in the microscopic and nanoscopic regimes. However, fully understanding optical trapping at the nanoscale remains a significant challenge. This holds importance because the nanoscale is the frontier for numerous promising advancements, ranging from enhancing single-molecule investigations in biology to developing hybrid devices for nanoelectronics and photonics and exploring fundamental quantum phenomena in opto-mechanics. We report an experimental and theoretical study of nanoparticles of various sizes, showing the advantages of the immense peak power of ultrashort laser pulses over conventional optical tweezers. We also demonstrate highly stable trapping of nanoparticles for extended durations at low average laser power using femtosecond lasers.

Observation of Moon-like Synchronous Revolution and Rotation of Janus Microparticles Trapped in an Annular Optical Trap

Observation of Moon-like Synchronous Revolution and Rotation of Janus Microparticles Trapped in an Annular Optical Trap

Optical tweezing of microparticles and cells using silicon-photonics-based optical phased arrays

Integrated optical tweezers have the potential to enable highly-compact, low-cost, mass-manufactured, and broadly-accessible optical manipulation when compared to standard bulk-optical tweezers. However, integrated demonstrations to date have been fundamentally limited to micron-scale standoff distances and, often, passive trapping functionality, making them incompatible with many existing applications and significantly limiting their utility, especially for biological studies. In this work, we demonstrate optical trapping and tweezing using an integrated OPA for the first time, increasing the standoff distance of integrated optical tweezers by over two orders of magnitude compared to prior demonstrations. First, we demonstrate trapping of polystyrene microspheres 5 mm above the surface of the chip and calibrate the trap force. Next, we show tweezing of polystyrene microspheres in one dimension by non-mechanically steering the trap by varying the input laser wavelength. Finally, we use the OPA tweezers to demonstrate, to the best of our knowledge, the first cell experiments using single-beam integrated optical tweezers, showing controlled deformation of mouse lymphoblast cells. This work introduces a new modality for integrated optical tweezers, significantly expanding their utility and compatibility with existing applications, especially for biological experiments.

Switching of three-dimensional optical cages using spatial coherence engineering

Precisely capturing and manipulating microparticles is the key to exploring microscopic mysteries. Optical tweezers play a crucial role in facilitating these tasks. However, existing optical tweezers are limited by their dependence on specific beam modes, which restrict their ability to flexibly switch and manipulate optical traps, thereby limiting their application in complex scientific challenges. Here, we propose a new method to achieve type switching and manipulation of optical traps using a single structured beam via optical coherence engineering. A conjugate-model random structured beam with a switch is designed. By altering the state of the switch, we can change the type of optical cage, enabling the capture of different particle types. Furthermore, the range, strength, and position of the optical trap can be controlled by adjusting the initial beam parameters. We hope that optical coherence engineering will extend the capabilities of existing structured optical tweezers, paving the way for advances in future optical tweezers applications.

Contactless Manipulation and Raman Analysis of Cometary Analogs and Micrometeorites by Acoustic Levitation

Extraterrestrial material collected during space missions is highly exposed to contamination issues during on-Earth analysis. Although high-protection-level protocols were developed, to minimize the contamination due to sample manipulation and the substrate contribution an optimal strategy is to perform in situ analysis with contactless techniques. Optical and acoustic trapping represent ideal candidates for contactless manipulation and analysis of nanometer-to-millimeter-sized particles. Here, we show results of the manipulation of cometary analogs and micrometeorite samples using a single-axis acoustic levitator. The investigation of the particle dynamics in the trap allows the calculation of the trap spring constants that are found in the mN/m range. In addition, we collect the Raman spectra of two levitated fragments of Saratov meteorite, demonstrating that acoustic levitation can be effectively used for the contactless and low-contamination characterization of samples of interest in astrophysics.

Propagation of spatiotemporal Airy-Laguerre complex-variable-function Gaussian wave packets in a chiral medium

We analyze the propagation of spatiotemporal Airy-Laguerre complex-variable-function Gaussian (ALCG) wave packets using phase modulation. These wave packets can split into left circularly polarized ALCG (LCP-ALCG) and right circularly polarized ALCG (RCP-ALCG) components due to circular birefringence in a chiral medium. Our discussion primarily focuses on the effects of polynomial order, angle parameters, distribution factor, cross-phase factor, first-order chirp factor, and chiral parameter on the ALCG wave packets. The distinct LCP-ALCG and RCP-ALCG wave packet characteristics are obtained, and the radiation forces on Rayleigh dielectric particles are investigated. Our results emphasize the influence of various parameters in the propagation properties of ALCG wave packets, unveiling their potential for advancements in optical communication and optical trapping domains.

Optical force and torque in near-field excitation of C3H6: A first-principles study using RT-TDDFT.

Optical trapping is an effective tool for manipulating micrometer-sized particles, although its application to nanometer-sized particles remains difficult. The field of optical trapping has advanced significantly, incorporating more advanced techniques such as plasmonic structures. However, single-molecule trapping remains a challenge. To achieve a deeper understanding of optical forces acting on molecular systems, a first-principles approach to analyze the optical force on molecules interacting with a plasmonic field is crucial. In our study, the optical force and torque induced by the near-field excitation of C3H6 were investigated using real-time time-dependent density functional theory calculations on real-space grids. The near field from the scanning tunneling probe was adopted as the excitation source for the molecule. The optical force was calculated using the polarization charges induced in the molecule based on Lorentz force. While the optical force and torque calculated as functions of the light energy were in moderate agreement with the oscillator strengths obtained from the far-field excitation of C3H6, a closer correspondence was achieved with the power spectrum of the induced dipole moment using near-field excitation. Time-domain analysis of the optical force suggests that the simultaneous excitation of multiple excited states generally weakens the force because of mismatches between the directions of the induced polarization and the electric field. This study revealed a subtle damping mechanism for the optical force arising from intrinsic electronic states and the influence of beating.

Research on adjustable measuring range vibration sensors based on optical fiber tweezers

We presents a vibration sensor with an adjustable measuring range based on optical fiber tweezers. The sensor employs a tapered optical fiber to trap individual yeast cells in a liquid environment, forming a sensing structure. Vibration signals from the source are transmitted through the medium to the cells in the optical trap. By adjusting the input optical power, the maximum restoring force of the light trap is increased when the vibration amplitude exceeds the measuring range, thus achieving variable-range vibration sensing. Experimental results demonstrate that the measuring range of the vibration sensor increases linearly with trapping power, ranging from 0.5 to 12.5 mW. This method extends the measuring range while maintaining the original sensing structure, making the optical fiber tweezers vibration sensor more adaptable for multi-task measurements with varying measuring ranges.

Tunable Elliptical Cylinders for Rotational Mechanical Studies of Single DNA Molecules.

The angular optical trap (AOT) is a powerful technique for measuring the DNA topology and rotational mechanics of fundamental biological processes. Realizing the full potential of the AOT requires rapid torsional control of these processes. However, existing AOT quartz cylinders are limited in their ability to meet the high rotation rate requirement while minimizing laser-induced photodamage. In this work, we present a novel trapping particle design to meet this challenge by creating small metamaterial elliptical cylinders with tunable trapping force and torque properties. The optical torque of these cylinders arises from their shape anisotropy, with their optical properties tuned via multilayered SiO 2 and Si 3 N 4 deposition. We demonstrate that these cylinders can be rotated at about 3 times the rate of quartz cylinders without slippage while enhancing the torque measurement resolution during DNA torsional elasticity studies. This approach opens new opportunities for previously inaccessible rotational studies of DNA processing.

Quantum jump photodetector for narrowband photon counting with a single atom

Using a single neutral Rb87 atom held in an optical trap, and “quantum jump” detection of single-photon-initiated state changes, we demonstrate a single-photon quantum jump photodetector (QJPD) with intrinsically narrow bandwidth and strong rejection of out-of-band photons, of interest for detecting weak optical signals in the presence of a strong broadband background. By analyzing fluorescence photon count distributions for the bright and dark states with and without excitation, we measure quantum efficiency of 2.9(2)×10−3, a record for single-pass quantum jump production, and signal-photon-unprovoked “dark jump” rate—analogous to the dark count rate of other detectors —of 3(10)×10−3jumps/s during passive accumulation plus 4.0(4)×10−3 jumps per readout, orders of magnitude below those of traditional single-photon detectors. Available methods can substantially improve QJPD quantum efficiency, dark jump rate, bandwidth, and tunability. Published by the American Physical Society 2024

Omnidirectional Gradient Force Optical Trapping in Dielectric Nanocavities by Inverse Design

Omnidirectional Gradient Force Optical Trapping in Dielectric Nanocavities by Inverse Design

Broadband Spin and Orbital Momentum Modulator Using Self-Assembled Nanostructures.

The structural symmetry of solids plays an important role in defining their linear and nonlinear optical properties. The quest for versatile, cost-effective, large-scale, and defect-free approaches and materials platforms for tailoring structural and optical properties on demand is underway since decades. A self-assembled spherulite material comprised of synthesized molecules with large dipole moments aligned azimuthally, forming a vortex polarity with spontaneously broken symmetry, is experimentally demonstrated. This unique self-assembled structure enables new linear and nonlinear light-matter interactions, including generating optical vortex beams with complex spin states and on-demand topological charges at the fundamental, doubled, and tripled frequencies. This work will likely enable numerous applications in areas such as high-dimensional quantum information processing with large capacity and high security, spatiotemporal optical vortices, and a novel optical manipulation and trapping platform.

Spatiotemporal formation of a single liquid-like condensate and amyloid fibrils of α-synuclein by optical trapping at solution surface

Liquid-like protein condensates have recently attracted much attention due to their critical roles in biological phenomena. They typically show high fluidity and reversibility for exhibiting biological functions, while occasionally serving as sites for the formation of amyloid fibrils. To comprehend the properties of protein condensates that underlie biological function and pathogenesis, it is crucial to study them at the single-condensate level; however, this is currently challenging due to a lack of applicable methods. Here, we demonstrate that optical trapping is capable of inducing the formation of a single liquid-like condensate of α-synuclein in a spatiotemporally controlled manner. The irradiation of tightly focused near-infrared laser at an air/solution interface formed a condensate under conditions coexisting with polyethylene glycol. The fluorescent dye-labeled imaging showed that the optically induced condensate has a gradient of protein concentration from the center to the edge, suggesting that it is fabricated through optical pumping-up of the α-synuclein clusters and the expansion along the interface. Furthermore, Raman spectroscopy and thioflavin T fluorescence analysis revealed that continuous laser irradiation induces structural transition of protein molecules inside the condensate to β-sheet rich structure, ultimately leading to the condensate deformation and furthermore, the formation of amyloid fibrils. These observations indicate that optical trapping is a powerful technique for examining the microscopic mechanisms of condensate appearance and growth, and furthermore, subsequent aging leading to amyloid fibril formation.

Far-field sub-diffraction focusing and controlled focus shaping of circularly polarized light using a dielectric phase plate

In recent years, sub-diffraction focusing has received substantial attention due to its versatility. However, achieving a flexible sub-diffraction focusing in the far field remains stimulating. Existing techniques either require complex fabrication facilities or are limited to the short focal length and high numerical aperture (NA) of the imaging system. Here, we introduce an optimization method for sub-diffraction focusing of a circularly polarized beam in the far field with a lens of large focal length. A cost-effective dielectric phase plate serves the purpose. By employing a phase plate composed of a thin layer of dielectric Si3N4, the phase of the propagating beam is modulated in the beam’s cross-section, which is divided into two regions of the opposite phase by the plate. A sub-diffraction focusing is achieved for a proper tunning between the two regions. In addition to sub-diffraction focusing, the phase plate is also capable of shaping the focus into a doughnut-shaped and a flat-top profile in the far field. This design provides a simple solution for sub-diffraction focusing and focus shaping that will find potential applications in optical imaging, optical trapping, and material processing.

Intrinsic angular momentum, spin and helicity of higher-order Poincaré modes

Abstract The availability of coherent sources of higher order Poincaré optical beams have opened up new opportunities for applications such as in the optical trapping of atoms and small particles, the manipulation of chirally-sensitive systems and in improved encoding schemes for broad-bandwidth communications. Here we determine the intrinsic properties of integer order m ⩾ 0 Poincaré Laguerre–Gaussian (LG) modes which have so far neither been evaluated, nor their significance highlighted. The theoretical framework we adopt here is both novel and essential because it emphasises the crucial role played by the normally ignored axial components of the twisted light fields of these modes. We show that the inclusion of the axial field components enables the intrinsic properties of the Poincaré modes, notably their angular momentum, both spin and orbital as well as their helicity and chirality, to be determined. We predict significant enhancements of the intrinsic properties of these modes when compared with those due to the zero order LG modes. In particular, we show that higher order LG Poincaré modes exhibit super-chirality and, significantly so, even in the case of the first order m = 1.

Hollow cylindrical three-dimensional nonlinear photonic crystal for annular beam generation

We present a hollow cylindrical three-dimensional nonlinear photonic crystal for annular beam shaping. By inducing a modification with the near-infrared femtosecond laser inside lithium niobate, we experimentally achieve second-order nonlinear optical coefficient modulation in three dimensions. The center dark spot ratio of the generated annular beam can be adjusted by varying the hollow ratio of the cylindrical structure. To demonstrate the controlled linear variation of the annular distribution, we generate annular beams with center dark spot ratios ranging from 0 to 0.7. Furthermore, we illustrate the feasibility of the generated annular beam in optical trapping by manipulating glass powder particles with diameters of 4–10 μm in water. Our hollow cylindrical structure owns effective control of beam dark spot ratio, while providing a tool for generating annular beam.

Generating controllable optical trap arrays with a polarization-based metalense

Metalenses have been widely used in various optical systems due to their compact size, lightweight nature and high efficiency. This paper presents a novel metalense for generating multiple optical trap arrays. The proposed metalense is composed of many unit cells of half-wave plate. By changing the polarization state of the incident light, the optical trap array generated by the metalense can be controlled. To evaluate its performance, we simulate the metalense with total trap numbers of 4 and 6 respectively. The results show that the produced optical trap arrays exhibit precise positioning, uniform size, and intensity distribution. Furthermore, the arrays maintain excellent uniformity and shape integrity even when the number of optical traps is increased. Compared with the previous metalenses only produce a specific optical trap array, the designed metalense offers higher flexibility and better meets the experimental requirements of multi-trap optical tweezers. Our metalense exhibits significant potential for the integration and miniaturization of optical trap arrays, as well as other focusing optical systems.

Enantioselective optical trapping of chiral nanoparticles by tightly focused fractional vector beams

Enantiomers exhibit markedly different chemical properties although they have the same chemical structure. The identification and separation of enantiomers have been significant issues in biomedicine and chemistry. In this work, we proposed an optical method that selective trapping of enantiomers by using tightly focused fractional vector beams (FVBs). In our proposed model, such a focused beam forms multiple local optical chirality densities (OCDs) with opposite signs at the focal plane. We found that focused FVBs can stably trap the enantiomers at the local positions with the minimum or maximum OCD according to the handedness of enantiomers. The positions and numbers of the trapped enantiomers have a relationship with the fractional topological charge. These results indicate that tightly focused FVBs are an all-optical method capable of dynamic modulation and achieving precise and stable trapping of multiple pairs of enantiomers. Our findings have practical applications in the multi-throughput and multi-sample manipulation of chiral materials.

Photo-Thermal Conversion and Raman Sensing Properties of Three-Dimensional Gold Nanostructure.

Three-dimensional plasma nanostructures with high light-thermal conversion efficiency show the prospect of industrialization in various fields and have become a research hotspot in areas of light-heat utilization, solar energy capture, and so on. In this paper, a simple chemical synthesis method is proposed to prepare gold nanoparticles, and the electrophoretic deposition method is used to assemble large-area three-dimensional gold nanostructures (3D-GNSs). The light-thermal water evaporation monitoring and surface-enhanced Raman scattering (SERS) measurements of 3D-GNSs were performed via theoretical simulation and experiments. We reveal the physical processes of local electric field optical enhancement and the light-thermal conversion of 3D-GNSs. The results show that with the help of the efficient optical trapping and super-hydrophilic surface properties of 3D-GNSs, they have a significant effect in accelerating water evaporation, which was increased by nearly eight times. At the same time, the three-dimensional SERS substrates based on gold nanosphere particles (GNSPs) and gold nanostar particles (GNSTs) had limited sensitivities of 10-10 M and 10-12 M to R6G molecules, respectively. Therefore, 3D-GNSs show strong competitiveness in the fields of solar-energy-induced water purification and the Raman trace detection of organic molecules.