Optical Photons Research Articles

Interactions of localized wave and dynamics analysis in the new generalized stochastic fractional potential-KdV equation.

In this paper, we investigate the new generalized stochastic fractional potential-Korteweg-de Vries equation, which describes nonlinear optical solitons and photon propagation in circuits and multicomponent plasmas. Inspired by Kolmogorov-Arnold network and our earlier work, we enhance the improved bilinear neural network method by using a large number of activation functions instead of neurons. This method incorporates the concept of simulating more complicated activation functions with fewer parameters, with more diverse activation functions to generate more complex and rare analytical solutions. On this basis, constraints are introduced into the method, reducing a significant amount of computational workload. We also construct neural network architectures, such as "2-3-1," "2-2-3-1," "2-3-3-1," and "2-3-2-1" using this method. Maple software is employed to obtain many exact analytical solutions by selecting appropriate parameters, such as the superposition of double-period lump solutions, lump-rogue wave solutions, and three interaction solutions. The results show that these solutions exhibit more complex waveforms than those obtained by conventional methods, which is of great significance for the electrical systems and multicomponent fluids to which the equation is applied. This novel method shows significant advantages when applied to fractional-order equations and is expected to be increasingly widely used in the study of nonlinear partial differential equations.

Integrated Pockels Modulators on Silicon Photonics Platform

AbstractElectro‐optic (EO) modulators are essential components in various fields, including optical communication, free‐space communication, microwave photonics, sensing, and light detection and ranging. The EO modulation enables the fast conversion of electric signals into optical signals, facilitating the precise manipulation of light. With advancements in fabrication processing techniques, next‐generation integrated EO modulators have demonstrated substantial improvements in modulation efficiency, bandwidth, and footprint. Here, the latest research progress in integrated EO modulation, focusing on the principle of the Pockels effect, key modulation metrics, novel EO thin‐film material platforms, and innovative device architectures is overviewed. Finally, it is evaluated different schemes and provide perspectives on future trends in developing integrated EO modulators, highlighting both the advantages and challenges of integrated EO modulation, including waveguide and electrode engineering, integrated methods, and other applications for large‐scale photonic integrated circuits.

Non-Markovian frequency conversion between optical and microwave photons with magnetomechanical transduction

Non-Markovian frequency conversion between optical and microwave photons with magnetomechanical transduction

Proton Predominance At UHE Cosmic Rays Through Analysis Of Different Mass Composition Models

Recently, detection of giant (1017 to 1020eV ) and super giant ( Ep >1020 eV ) air showers is gaining importance as the investigation of EAS in these energy ranges is expected to give necessary information on characteristics of high energy nuclear interactions in one hand and for solving the astrophysical problem of Cosmic Ray origin , beyond the Greisen-Zatsepin-Kuzmin cut-off energy near 1020 eV. Due to the very low Cosmic Ray flux in the UHE range ( > 1017 eV ) direct measurement by balloons or satellites are not possible. The experimental approach realized conventionally uses extended ground-based installations catching data of the induced air showers . An alternative approach is to use a low cost particle detector array called mini-array for detecting UHE cosmic rays by Linsley’s method of arrival time measurement. The miniarray consist of eight plastic scintillation counters covering an area of 2m2 operating for detecting EAS particles of primary energy 1017 -1018 eV based on Linsley’s method of arrival time measurement. An optical detector (5 inch diameter PMT) has been installed at the centre of the miniarray to record the associated optical Cerenkov pulse produced by the ultra-relativistic shower particles in the atmosphere with an aim to derive primary mass composition above 1017 eV. Optical pulses are recorded in one channel of the DSO and the stored data in the wave form memory are transferred to the computer via GPIB interface. The particle detector pulses are triggered with the help of trigger circuit and recorded through other channel of the DSO and transferred to the same DSO. However, the data are subjected to large fluctuation both in particle detection and optical photon detection. Primary energy is estimated through the parameter shower size which is also indirectly measured from a small sample of shower front using miniarray data. Mass composition estimated indirectly relies on simulation model. On the basis of pulse height distribution measurement, the inferred mass composition is predominantly protons, with a tendency of mass composition becoming lighter at the highest energies.

Quantum Entanglement between Optical and Microwave Photonic Qubits

Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell’s inequalities. More recently, entangled many-body states have been realized via strong nonlinear interactions in microwave circuits with superconducting qubits. Here, we demonstrate a chip-scale source of entangled optical and microwave photonic qubits. Our device platform integrates a piezo-optomechanical transducer with a superconducting resonator which is robust under optical illumination. We drive a photon-pair generation process and employ a dual-rail encoding intrinsic to our system to prepare entangled states of microwave and optical photons. We place a lower bound on the fidelity of the entangled state by measuring microwave and optical photons in two orthogonal bases. This entanglement source can directly interface telecom wavelength time-bin qubits and gigahertz frequency superconducting qubits, two well-established platforms for quantum communication and computation, respectively. Published by the American Physical Society 2024

Heralding entangled optical photons from a microwave quantum processor

Exploiting the strengths of different quantum hardware components may increase the capabilities of emerging quantum processors. Here we propose and analyze a quantum architecture that leverages the nonlocal connectivity of optics, along with the exquisite quantum control offered by superconducting microwave circuits, to produce entangled optical resource states. In contrast to previous proposals on optically distributing entanglement between superconducting microwave processors, we use squeezing between microwaves and optics to produce microwave-optical Bell pairs in a dual-rail encoding from a single microwave quantum processor. Moreover, the microwave quantum processor allows us to deterministically entangle microwave-optical Bell pairs into larger cluster states, from which entangled optical photons can be extracted through microwave measurements. Our scheme paves the way for small microwave quantum processors to create heralded entangled optical resource states for optical quantum computation, communication, and sensing using imperfect microwave-optics transducers. We expect that improved isolation of the superconducting processor from stray optical fields will allow the scheme to be demonstrated with currently available hardware. Published by the American Physical Society 2024

Thermoelectric and optoelectronic features of C- and N- doped CsZnBr3 halide perovskite for use in spin filter and energy efficient devices

Present study reports mainly thermoelectric and optical properties followed by its structural, electronic, magnetic properties of CsZnBr3 halide perovskite using full potential linearized augmented plane wave method in the framework of density functional theory. Further we analyzed the impact of C and N on CsZnBr3 for their electronic structure, magnetic nature, thermoelectric, and optical properties. CsZnBr3 under optimum conditions exhibits a non-magnetic phase, which interestingly upon doping of C and N, turns out to be ferromagnetic with magnetic moments of 3.0 and 2.0 μB for CsZnBr2C and CsZnBr2C, respectively. Furthermore, Semiconducting CsZnBr3 exhibits spin filter semiconductor nature with energy band gaps of 1.38↑ and 3.26↓ eV for CsZnBr2C and 2.72↑ and 1.67↓ eV for CsZnBr2N. These doped materials can be used in spintronics as spin-filter devices for lower power consumption leading to more energy-efficient electronics. The thermoelectric parameters as Seebeck coefficient, power factor, thermal conductivity and figure of merit are estimated using BoltzTrap code. The figure of merit value found enhanced from 0.88 to 1.06 with one orientation of spins for CsZnBr2C at high temperature, which suggests its potential use in thermoelectric applications. In optical reference photon energy can be absorbed in UV-region.

Microwave‐to‐Optics Conversion Using Magnetostatic Modes and a Tunable Optical Cavity

AbstractQuantum computing, quantum communication, and quantum networks rely on hybrid quantum systems operating in different frequency ranges. For instance, the superconducting qubits work in the gigahertz range, while the optical photons used in communication are in the range of hundreds of terahertz. Due to the large frequency mismatch, achieving the direct coupling and information exchange between different information carriers is generally difficult. Accordingly, a quantum interface is demanded, which serves as a bridge to establish information linkage between different quantum systems operating at distinct frequencies. Recently, the magnon mode in ferromagnetic spin systems has received significant attention. While the inherent weak optomagnonic coupling strength restricts the microwave‐to‐optical photon conversion efficiency using magnons, the versatility of the magnon modes, together with their readily achievable strong coupling with other quantum systems, endow them with many distinct advantages. Here, the magnon‐based microwave‐light interface is realized by adopting an optical cavity with adjustable free spectrum range and different kinds of magnetostatic modes in two microwave cavity configurations. By optimizing the parameters, a conversion efficiency of with bandwidth of 24 MHz is achieved. The impact of various parameters on the microwave‐to‐optics conversion is analyzed. The study provides useful guidance and insights to further enhancing the microwave‐to‐optics conversion efficiency using magnons.

Suppression of intensity noise and phase noise for thulium-holmium co-doped fiber laser by self-injection locking

The present study proposes and demonstrates a narrow-linewidth thulium-holmium co-doped fiber laser based on self-injection locking. The laser with single-longitudinal-mode operation is realized using a fiber Bragg grating as a wavelength-selection component and a dual-ring compound cavity as a mode-selection filter. The linewidth was compressed by increasing the photon lifetime by utilizing delay fibers of different lengths in the feedback cavity. The results show that the optical signal-to-noise ratio of the output laser is 57.2 dB, and the relative intensity noise is -130.43 dB/Hz with self-injection locking. The intrinsic linewidth is compressed from 39.45 kHz to 3.21 kHz, a reduction of nearly an order of magnitude. The linewidth compression mechanism solves the problems associated with deep linewidth compression in fiber lasers with long ring cavities and fosters the development of practical and reliable all-fiber structures. The laser source is characterized by low cost, high coherence, and low noise, which are highly desirable features in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing.

Evaluation of TOPAS MC tool performance in optical photon transport and radioluminescence-based dosimetry

Radiation therapy plays a pivotal role in modern cancer treatment, demanding precise and accurate dose delivery to tumor sites while minimizing harm to surrounding healthy tissues. Monte Carlo simulations have emerged as indispensable tools for achieving this precision, offering detailed insights into radiation transport and interaction at the subatomic level. As the use of scintillation and luminescence dosimetry becomes increasingly prevalent in radiation therapy, there arises a need for validated Monte Carlo tools tailored to optical photon transport applications. In this paper, an evaluation process of the TOPAS (TOol for PArticle Simulation) Monte Carlo tool for Cerenkov light generation, optical photon transport and radioluminescence based dosimetry is presented. Three distinct sources of validation data are utilized: one from a published set of experimental results and two others from simulations performed with the Geant4 code. The methodology employed for evaluation includes the selection of benchmark experiments, making use of opt3 and opt4 Geant4 physics models and simulation setup, with observed slight discrepancies within the calculation uncertainties. Additionally, the complexities and challenges associated with modeling optical photons generation through luminescence or Cerenkov radiation and their transport are discussed. The results of our evaluation suggests that TOPAS can be used to reliably predict Cerenkov generation, luminescence phenomenon and the behavior of optical photons in common dosimetry scenarios.

Quantum entanglement of optical photons: the first experiment, 1964–67

The first experimental observation of entangled visible light was achieved by optically exciting free atoms of calcium and detecting pairs of photons emitted in a two-stage cascade. The polarizations of the entangled photons were observed to be correlated, in agreement with quantum theory. This review describes the rationale, methodology, challenges, and results, including experimental details not previously published.

Rapid-calibration optical tunable delay line on 3-µm-thick SOI photonic platforms

Optical tunable delay lines (OTDLs) which can capture temporal optical signals, and overcome the challenge of halting light are crucial for optical communications and microwave photonics. Here, a rapid-calibration 8-bit OTDL on the 3-µm-thick silicon-on-insulator (SOI) platform consisting of waveguide spirals and integrated optical switches is proposed, achieving a maximum delay time of 3570 ps with a resolution of 14 ps/stage. The large delay is attributed to the spirals of a 3-µm-thick SOI platform featuring a delay efficiency of approximately 11.49 ps/mm, with wavelength-insensitivity transmission loss of 0.32 dB/cm, and the polarization-dependent loss is only 0.075 dB/cm within 140 nm bandwidth. In addition, the optical switches with extinction ratios up to 50 dB. Integrated variable optical attenuators can suppress crosstalk and facilitate rapid calibration for OTDLs. The advantages of OTDLs’ large delay time, high signal-to-noise, and rapid calibration make them suitable for optical programmers and microwave photonics radars.

Prediction of Shockley–Read–Hall lifetimes in strained layer superlattices for mid-wave and long-wave infrared photodetectors

We have calculated carrier nonradiative recombination lifetimes limited by Shockley–Read–Hall (SRH) centers in strained layer superlattices (SLSs) for mid-wave and long-wave infrared applications. The capture rate of an electron (hole) in the SLS's conduction (valence) band by the defect level is dominated by a multi-phonon process, which is orders-of-magnitude more efficient than the radiative process. Long-range polar coupling between electrons and optical phonons can account for the observed SRH lifetimes in a variety of SLSs reported in the literature. The capture rate depends on temperature rather weakly, consistent with experimental observations. The efficient capture is caused by the comparable electronic difference and lattice relaxation energy, Ect∼Sℏω, with S and ℏω being the Huang–Rhys factor and optical photon energy in the SLSs. A weaker polar coupling would give rise to a smaller capture cross section, which, for InAs/InAsSb SLSs, can be achieved by increasing Sb in the alloy region.

A primary simulation study of scintillating fibre dosimetry for a proton minibeam

In this paper is explored the application of optical fibre-based dosimetry in the context of charged-particles MiniBeam Radiation Therapy through comprehensive simulation analyses. A FLUKA simulation of 64 Scintillating Plastic Optical Fibre array was implemented based on a prototype built in our group. The simulations indicate that the proposed system accurately reproduces the peak-and-valley pattern of minibeams. The optical photons transport inside and between fibres was also simulated, revealing that the optical crosstalk is negligible. The resilience of the detector’s electronics under secondary radiation composed of photons and neutrons was assessed. Our results suggest the electronics’ ability to withstand the expected radiation environment in clinical accelerators. This simulation-based investigation provides valuable insights into the feasibility of optical fibre-based dosimetry for MBRT. The results show the potential of using an array of thin scintillating plastic optical fibres to determine the peak–valley dose ratio, which is a key parameter to assess the efficacy of this emerging modality.

Dynamic Information Encryption and Coding using Liquid Crystal Soft Helical Microstructures with Spiropyran Photochromic Switch

AbstractIn contrast to conventional anti‐counterfeiting technologies, which are susceptible to decryption and exhibit limited effectiveness, the utilization of light to dynamically configure soft materials in a fully reversible and programmable manner not only enhances data security but also improves anti‐counterfeiting performance. However, achieving precise control over reflection structural colors and laser wavelengths within a broad dynamic range remains a challenge. In this study, a UV‐responsive soft helical superstructure is established by combining a photochromic compound with chiral liquid crystals (LCs). By manipulating the Bragg reflection angle, structural reflection colors ranging from red to cyan are successfully achieved. The introduction of an anti‐counterfeiting technique that embeds diverse micro‐structures provides features such as color adjustability, erasability, and angle‐dependent stability. Using the unique properties of this soft helical superstructure, the implementation of a wavelength‐tunable LC bandgap laser through optically reconfigurable Förster resonance energy transfer processes is showcased. Furthermore, a straightforward prototype information encoder is developed to mimic the processes of information encoding and decoding, bypassing the need for complex algorithm design. This research underscores the practicality of LC helical soft systems, emphasizing their distinctive responsiveness to light and their applicability in optical programming photonics.

Informing solar blind radioluminescence imaging through a calibrated spectrum

While direct radiation detection methods offer great insight into the origin of ionizing particles and photons, their use to locate contaminated areas or concealed radioactive sources can lead to undue exposure of personnel and equipment to ionizing radiation or the potential for contamination. These same sources induce ultraviolet (UV) optical photon fluorescence in air – a process referred to as radioluminescence – that may be imaged from low dose regions over larger attenuation lengths than ionizing radiation. However, most optical detection methods are limited to low lighting conditions to image the more abundant ultraviolet-A (UV-A) photons. To extend this capability to room light or daytime conditions, the solar blind region (Ultraviolet-C (UV–C), <280 nm) can be tapped. Though the emission yield of UV-C photons is roughly two orders of magnitude lower than that in the UV-A regime, the UV-C offers dramatic improvements in signal-to-noise ratios under bright lighting conditions due to decreased background interferences. The yield of specific UV-C lines, if present in the literature at all, varies widely, which has a large impact in modeling and analyzing standoff UV-C measurement scenarios. Thus, we have captured improved radioluminescence spectra over 250–400 nm and identified observed emission peaks in ambient air. Many of the UV-C photons produced by ionizing radiation excitation result from high-energy, molecular nitrogen Gaydon-Herman transitions which have had limited study to date for this application. Relating these findings to published UV-A yields, we estimate emissions between 0.15 and 0.19 photons/MeV over 250–280 nm. We also use a commercial corona-discharge imaging camera to demonstrate outdoor UV-C radiation mapping of alpha and gamma emitters from 50 to 75 m standoffs, respectively. The imaged “counts” are compared to optically modeled values and show the same trend over distance.

Avoiding lateral mode leakage in thin film lithium niobate waveguides for the generation of spectrally pure photons at telecom wavelengths

Photonic integrated optical components, notably straight waveguides, serve as pivotal elements for on-chip generation and manipulation of quantum states of light. In this work, we focus on optimizing waveguides based on lithium niobate on insulator (LNOI) to generate photon pairs at telecom wavelengths using spontaneous parametric down-conversion (SPDC). Specifically, we investigate lateral leakage for all possible SPDC processes involving type 0, type I, and type II phase matching conditions in an X-cut lithium niobate waveguide and provide a recipe to avoid leakage loss for the interacting photons. Furthermore, focusing on type II phase matching, we engineer the waveguide in the single-mode regime such that it also satisfies group index matching for generating spectrally pure single photons with high purity (99.33%). We also address fabrication imperfections of the optimized design and find that the spectral purity of the generated photons is robust to fabrication errors. This work offers guidance for the suitable selection of morphological parameters to obtain lossless, single-mode LNOI waveguides for building linear optical circuits and photon pair generation at telecom wavelengths using desired phase-matching conditions.

Complete analysis of hyperentangled Bell state in three degrees of freedom using Kerr effect and self-assisted mechanism

We present an efficient scheme for the complete hyperentangled Bell state analysis (HBSA) of photon system with polarization and two longitudinal momentum degrees of freedom (DOFs), resorting to weak cross-Kerr nonlinearity, linear optical elements and single photon detectors. In the process of distinguishing the 64 hyperentangled Bell states in three DOFs, the self-assisted mechanism is embedded, which makes our scheme simple and realizable. Moreover, we have discussed the applications of this complete HBSA scheme for high-capacity quantum communication protocols that are based on photonic hyperentanglement in three DOFs.

Efficient Emission of Highly Polarized Thermal Radiation from a Suspended Aligned Carbon Nanotube Film.

A polarized light source covering a wide wavelength range is required in applications across diverse fields, including optical communication, photonics, spectroscopy, and imaging. For practical applications, high degrees of polarization and thermal performance are needed to ensure the stability of the radiation intensity and low energy consumption. Here, we achieved efficient emission of highly polarized and broadband thermal radiation from a suspended aligned carbon nanotube film. The anisotropic nature of the film, combined with the suspension, led to a high degree of linear polarization (∼0.9) and great thermal performance. Furthermore, we performed time-resolved measurements of thermal emission from the film, revealing a fast time response of approximately a few microseconds. We also obtained visible light emission from the device and analyzed the film's mechanical breakdown behavior to improve the emission intensity. Finally, we demonstrated that suspended devices with a constriction geometry can enhance the heating performance. These results show that carbon nanotube film-based devices, as electrically driven thermal emitters of polarized radiation, can play an important role for future development in optoelectronics and spectroscopy.

Creating advanced photonics AI assistants

AbstractThe AI assistants that have emerged in the past couple of years open up new domains of knowledge, allowing us to be educated and guided in many new and versatile domains. However, for domain experts such as optical designers, scientists, and photonics engineers, they often have limitations in their information accuracy and scope. 3DOptix has developed a dynamic approach to overcome these limitations that enables the creation of a proficient optical design copilot. This copilot assists experts in every step of the design process, including conducting precise calculations, searching for components, and simulating actions.