Optical OFDM Research Articles

Analysis of 256-QAM optical OFDM-NOMA signal detection using beam forming

Abstract The incessant growth of data demand in modern communication systems has spurred the quest for innovative technologies capable of delivering higher data rates, improved spectral efficiency, and enhanced quality of service. This research focuses on the synergistic integration of three cutting-edge technologies: 256-QAM (quadrature amplitude modulation), NOMA (non-orthogonal multiple access), and hybrid beamforming within the optical OFDM (orthogonal frequency division multiplexing) framework. The aim is to investigate their combined potential for revolutionizing optical communication networks and meeting the escalating demands of 5G and beyond. The methodology employed in this research entails extensive simulations and analytical assessments to gauge the performance of the proposed system under diverse channel conditions and operational scenarios. Metrics such as bit error rate (BER), spectral efficiency, and capacity are scrutinized to provide insights into the system’s efficiency and scalability. The amalgamation of 256-QAM, NOMA, and hybrid beamforming is expected to yield exponential gains in spectral efficiency, thereby optimizing the utilization of precious spectral resources. Reduced latency is pivotal for an array of real-time applications such as autonomous vehicles and augmented reality. This research aims to minimize latency, ensuring timely and responsive data transmission.

A novel PAPR reduction scheme based on time-delay neural network for CO-OFDM systems

In this paper, we propose a low-complexity peak-to-average power ratio (PAPR) reduction scheme based on time-delay neural network (TDNN) for coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems to reduce the limitation of PAPR on the total power of laser diodes and the impact of fiber nonlinear effects. The proposed scheme is jointly trained on traditional iterative clipping and filtering (ICF) scheme and simplified clipping and filtering (SCF) scheme, and changes the objective function by adjusting the given training weight α. Compared to the original orthogonal frequency division multiplexing (OFDM) signal of existing system, our method achieves an adjustable PAPR reduction of 5.31 dB to 6.12 dB for 10−4 complementary cumulative distribution function (CCDF). When bit error rate (BER) Pe=10−3, the proposed scheme (α=0.5) achieves additional transmission distances of 220 km, 55 km, 105 km, and 100 km, compared to the original OFDM signal, partial transmission sequence (PTS) scheme, ICF scheme, and feedforward neural network (FNN)-based ICF scheme, respectively. Besides, our method achieves 86.3% and 80.0% floating-point operations (FLOPs) reductions, compared with PTS scheme and ICF scheme, respectively, which effectively reduces the complexity of PAPR reduction module, saving the system computational time.

Efficient Chromatic and Residual Dispersion Post compensation for Coherent Optical OFDM

Efficient Chromatic and Residual Dispersion Post compensation for Coherent Optical OFDM

Efficient Optical OFDM System Resilience to Indoor Wireless Multipath Channels

This article presents a developed intensity modulation/direct detection (IM/DD) optical orthogonal frequency division multiplexing (O-OFDM). More precisely, the presented C-O-OFDM is based on the C-transform as a unitary orthogonal transform instead of the state-of-the-art discrete Fourier transform (DFT). Due to the properties of the real C-transform, Hermitian symmetry (HS) is not required to produce real OFDM samples. Therefore, the proposed scheme supports twice the input symbols compared to conventional DFT-based OFDM system. Real data mapping and DC bias technology is considered to evaluate the performance of the presented scheme over optical wireless multipath. The simulation results shows that the proposed C-O-OFDM is more resilience to multipath phenomena than the competitive DFT-O-OFDM and DHT-O-OFDM schemes for similar bit rate. The proposed scheme achieves about 22 dB signal-to-noise ratio (SNR) gain in comparison with the DFT-O-OFDM and about 2.5 dB SNR gain in comparison with the DHT-O-OFDM scheme.

Design and performance investigation of a coherent optical system based multi-band OFDM with various indexes

Abstract In this work, a comprehensive study of a multi-band optical orthogonal frequency division multiplexing (MB-OOFDM) system is investigated. Different OFDM indexes (128,256,512, and 1024) are utilized with the coherent detection CD technique. High-order modulation 16-quadrature amplitude modulation (16-QAM) is used to obtain high spectral efficiency. Transmission studies indicated that 128 subcarriers with 2-bands exhibit a higher optical signal-to-noise ratio (OSNR) of 23 dB with lower bit error rate (BER) of 1 × 10−4, while 1024 subcarriers with 8-bands shows a lower OSNR of 22 dB with a higher BER of 3 × 10−3. Even though the higher subcarrier type has the lowest BER, it provides a superior solution when combined with wavelength-division multiplexing (WDM) in the presence of forward error correction (FEC). The performance of the system with 40 Gbps along 800 km of uncompensated fiber has designed and simulated using Optisystem software.

Tolerance-Aided Interference Degradation for Optical OFDM in Power-Constrained Systems

Optical wireless communications (OWCs) are power-efficient for providing short-range and high-speed data transmission. In this paper, we propose an interference degradation algorithm for power-constrained OWC systems when using orthogonal frequency division multiplexing (OFDM). In this algorithm, we introduce a decision tolerance at the receiver that can be optimally designed to reduce interference caused by peak power clipping distortion and decrease additive noise collected by the photodetectors. Although the recently proposed clipping-enhanced optical OFDM (CEO-OFDM) can transmit clipped information through extra signal frames, reconstructing the received signal introduces more noise. Using the proposed decision tolerance, we can determine whether the signals in the extra frame are required for data reconstruction. By optimally choosing the decision tolerance, the bit error rate (BER) performance is enhanced compared to those of DCO, ACO, and CEO-OFDM. Additionally, the proposed algorithm offers a wider dynamic modulation index range than DCO, ACO, and CEO-OFDM at the same BER. Using the tested parameters, the proposed algorithm with 64-QAM achieves a similar best BER performance as DCO, ACO, and CEO-OFDM using 32-QAM. Therefore, the proposed algorithm achieves a higher data rate than those of the other compared techniques.

High-speed Optical OFDM transmission by reducing the nonlinearity of LEDs in Visible light Communication Systems

High-speed Optical OFDM transmission by reducing the nonlinearity of LEDs in Visible light Communication Systems

Performance enhancement of LACO-OFDM BER and PAPR using a K-means algorithm for a VLC system

Layered asymmetrical clipped optical-orthogonal frequency division multiplexing (LACO-OFDM) enhances spectral efficiency by mandating the use of a K-means algorithm in LACO-OFDM (KLACO-OFDM), which enables efficiency gains to nearly double by modulating odd and even subcarriers. The traditional receiver is not sufficiently sophisticated enough to exploit the full potential of LACO-OFDM, thereby restricting its performance. In this paper, a K-means algorithm was used to increase the spectral efficiency of LACO-OFDM by integrating machine learning to cluster the inward signal such that the original locations of the received constellations can be retrieved. A K-means algorithm is used for assigning the received constellation points into their clusters of the ordinary quadrature amplitude modulator constellation points. The new mathematical framework in the proposed scheme is structured to analyze the PAPR and BER performance of LACO-OFDM systems that have been derived. The K-means algorithm development in LACO-OFDM (KLACO-OFDM) has also reduced the intersymbol interference, hence improving the spectral efficiency of LACO-OFDM compared with the conventional system in visible light communication (VLC) systems. BER gains were about 1.2–1.6 dB at 10−3 BER value, which rises from 1.4 to 2 dB for a 10−4 BER value because a lower BER facilitates precise estimation.

Improving the BER and PAPR performances of optical OFDM with lazy lifting wavelet transform

Improving the BER and PAPR performances of optical OFDM with lazy lifting wavelet transform

Enhanced Physical Layer Security and PAPR Performance Based on Disturbance of Data Cluster Under Chaotic Sequence Color Seeking Mechanism in CO- OFDM System

This study proposes a physical layer encryption scheme based on disturbance of data cluster under color seeking mechanism of chaotic sequence which is generated by Brownian motion determined by keys aiming to improve security of coherent optical orthogonal frequency division multiplexing (CO-OFDM) system. Chaotic sequences with good randomness and unpredictability are endowed with a unique color composed of two primary colors and go through order transformation by sorting and seeking, which forms the chaotic sequence color seeking mechanism. The disturbance of transmitted data is realized according to chaotic sequence color seeking mechanism and PAPR performance is optimized simultaneously. The security of system is enhanced due to a key space of 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">90</sup> and PAPR can be reduced by 0.5 dB. An experiment conducted in a 40 GHz 16QAM CO-OFDM system over an 80 km standard single mode fiber (SSMF) shows that the authorized user can successfully decrypt the received signal, while the eavesdroppers cannot derive valid information with bit error rate (BER) at approximately 0.5. Analyses of peak to average power ratio (PAPR) performance and time complexity of the scheme are further carried out under different cluster forming methods to derive the optimized configuration which is critical in encryption.

Reverse polarity optical Orthogonal frequency Division Multiplexing for High-Speed visible light communications system

The radio frequency spectrum, which has been steadily getting smaller, is under pressure from growing cellular data traffic. A more dependable communication channel is required. To setup the communication medium, VLC uses LED illumination. In order to increase network throughput, the goal of this study is to analyze and model signal conditioning techniques in the visible spectrum. VLC technology offers synchronized illumination of LED lamps as well as wireless broadband connectivity. Using the real-valued O-OFDM baseband signal, optical orthogonal frequency division multiplexing (O-OFDM) offers a viable modulation option for very-low-bit-rate (VLC) systems to modulate the optical carrier's instantaneous power to attain gigabit data rates. However, one important design difficulty preventing VLC from being commercialized is how to combine industry-favored pulse width modulation (PWM) dimming technology while retaining a dependable, broadband connection. In this paper, Reverse Polarity optical orthogonal frequency division multiplexing (RPO-OFDM) is proposed as a new signal format for combining the fast O-OFDM contact signal with the comparatively slow PWM dimming signal, as both signals contribute to the illuminative brightness of the LED. The average SNR, additional testing demonstrates that the suggested method outperforms the Asymmetrically clipped optical OFDM (ACO), Optimized Flipped Optical (OFO) and DC biased optical OFDM (DCO), and algorithms in similar operating conditions.

A novel PAPR reduction scheme based on nonlinear real-valued support vector regression for CO-OFDM systems

Coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems suffer from the high peak-to-average ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals, which leads to the back-off of laser power and fiber nonlinear effects, thereby deteriorating the bit error rate (BER) performance and limiting the transmission distance. Iterative clipping and filtering (ICF) scheme, as a direct, simple and effective PAPR reduction scheme that only processes signals at the transmitter, but requires multiple fast Fourier transform (FFT)/inverse fast Fourier transform (IFFT), resulting in high computational complexity. We propose a novel scheme using the machine learning (ML) technique, which is based on nonlinear real-valued support vector regression (NRSVR) and trained on ICF scheme. The simulation results show that compared with ICF scheme, the proposed scheme has a similar PAPR0 for 10−4 complementary cumulative distribution function (CCDF), an additional 15 km of single mode fiber (SMF) transmission for 16 dB optical signal-to-noise ratio (OSNR) and 10−3BER, and a significant time complexity reduction. Compared with other ML-based schemes, the proposed scheme also achieves better performance and lower computational complexity.

Security enhancement through high-quality illumination enabled by wavelength-shuffled optical OFDM.

This study presents a novel physical layer security technique that aims to increase the security level by reducing decryption attempts and improving the resistance to security attacks. To achieve this goal, the proposed approach generates signals that resemble Gaussian noise in both the time and frequency domains. This method utilizes a wavelength-shuffled optical orthogonal frequency division multiplexing (OFDM) scheme, which is combined with the standard blue-excited phosphorus lighting approach. Experimental validation of the proposed system demonstrates a secure data rate of 880 Mb/s in the aggregate, followed by a real-time demonstration showing its practicality. Furthermore, the proposed system generates high-quality white light (with a color rendering index of 83 and correlated color temperature of 5040 K), which makes it suitable for practical illumination applications.

Layered hybrid PAM-DMT for IM/DD OWC systems.

Traditional pulse-amplitude-modulated discrete multitone modulation (PAM-DMT) suffers from poor overall performance of spectral and power efficiencies in optical wireless communication (OWC) systems. We propose layered hybrid PAM-DMT (LHPAM-DMT) to utilize more subcarriers to improve the performance. The real part of frequency domain signal is divided into several layers and symmetry biases are added in time domain to generate real-valued and nonnegative signals for intensity modulation with direct detection (IM/DD) OWC systems. By appropriately designing the orthogonality between the signals in lower layers and signals & added biases in higher layers, we further propose an iterative receiver to recover the transmitted information. Theoretical derivation proves that LHPAM-DMT has higher spectral efficiency than PAM-DMT and lower complexity than layered PAM-DMT. Numerical results suggest that LHPAM-DMT is more power efficient than PAM-DMT as well as direct-current (DC) biased optical OFDM (DCO-OFDM), one of the most popular schemes.

Distortion-Elimination Hybrid OFDM With Low Complexity for Optical Wireless Communications

In optical wireless communications (OWC), hybrid optical orthogonal frequency division multiplexing (O-OFDM) schemes, such as hybrid asymmetrically clipped O-OFDM (HACO-OFDM) and layered asymmetrically clipped O-OFDM (LACO-OFDM), enjoy both high power and spectral efficiency. However, due to the non-orthogonal transmission of signal components induced by the clipping distortion, successive interference cancellation (SIC) is required in these hybrid O-OFDM schemes, leading to notably increased complexity. In this paper, we conceive novel hybrid O-OFDM schemes to offer both high spectral and power efficiency, whilst possessing low complexity. By elaborately designing a time-domain (TD) distortion elimination methodology at the transmitter, a novel distortion-elimination hybrid O-OFDM (DEHO-OFDM) is first proposed, which combines asymmetrically clipped O-OFDM (ACO-OFDM) and pulse-amplitude-modulated discrete multitone (PAM-DMT) in an interference-free manner. In order to further improve the spectral efficiency, an enhance DEHO-OFDM (EDEHO-OFDM) is designed by activating the remaining subcarrier resources. Both DEHO-OFDM and EDEHO-OFDM can be realized through a single-IFFT transmitter and standard OFDM receiver, leading to much lower complexity than the existing hybrid O-OFDM schemes. Simulation results have demonstrated the superiorities of the proposed schemes over HACO-OFDM and LACO-OFDM in terms of peak-to-average-power ratio (PAPR) and bit error rate (BER).

Vector Coding Optical Wireless Links

The quasi-static nature of the optical wireless channel means that the channel state information (CSI) can be readily available at the transmitter and receiver prior to data transmission. This implies that electrically band-limited optical wireless communication (OWC) systems can make use of optimal channel partitioning or vector coding based multi-channel modulation (MCM) to achieve high throughput by mitigating the non-linearities arising from the optical and electrical channel. This paper proposes a pulse amplitude modulation (PAM) based DC-biased optical vector coding (DCO-VC) MCM scheme for OWC. The throughput performance of DCO-VC is evaluated and compared to the well known DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM) over hybrid (line-of-sight and diffuse) and diffuse (non line-of-sight only) visible light communication (VLC) channels with additive white Gaussian noise. For the completeness of the VLC physical layer, the performance comparison is based on an uncoded and a forward error correction transmission mode using well-known convolutional codes with Viterbi decoder. The results show that the coded DCO-VC outperforms DCO-OFDM system by achieving up to 2 and 3 dB signal to noise ratio gains over hybrid and diffuse VLC channels, respectively.

LiNEV: Visible Light Networking for Connected Vehicles

DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM) has been introduced to visible light networking framework for connected vehicles (LiNEV) systems as a modulation and multiplexing scheme. This is to overcome the light-emitting diode (LED) bandwidth limitation, as well as to reduce the inter-symbol interference caused by the multipath road fading. Due to the implementation of the inverse fast Fourier transform, DC-OFDM suffers from its large peak-to-average power ratio (PAPR), which degrades the performance in LiNEV systems, as the LEDs used in the vehicles’ headlights have a limited optical power-current linear range. To tackle this issue, discrete Fourier transform spread-optical pulse amplitude modulation (DFTS-OPAM) has been proposed as an alternative modulation scheme for LiNEV systems instead of DCO-OFDM. In this paper, we investigate the system performance of both schemes considering the light-emitting diode linear dynamic range and LED 3 dB modulation bandwidth limitations. The simulation results indicate that DCO-OFDM has a 9 dB higher PAPR value compared with DFTS-OPAM. Additionally, it is demonstrated that DCO-OFDM requires an LED with a linear range that is twice the one required by DFTS-OPAM for the same high quadrature amplitude modulation (QAM) order. Furthermore, the findings illustrate that when the signal bandwidth of both schemes significantly exceeds the LED modulation bandwidth, DCO-OFDM outperforms DFTS-OPAM, as it requires a lower signal-to-noise ratio at a high QAM order.

Free space optical communication in Indian cities; channel characteristics and link performance

Abstract Free Space Optical (FSO) communication systems, offering high-speed and high-bandwidth transmission, have emerged as a possible substitute for conventional wired and wireless communication systems. However, FSO links are susceptible to atmospheric deficiencies including attenuation, scintillation, and turbulence, which may severely impact the performance of the communication link. In this research paper, we propose and analyze the performance of a 25 Gbps dual-polarization quadrature phase shift keying (DP-QPSK) coherent optical orthogonal frequency division multiplexing (CO-OFDM)-based FSO communication link with spatial diversity technique under various climatic conditions in four different geographical locations of India, i.e., Delhi, Ahmedabad, Kolkata, and Chennai in the year 2021. The proposed FSO communication system is evaluated through performance analysis and parametric evaluation under various weather conditions such as clear sky, fog, haze, rain, cloud, and thermal gradient. Key performance metrics such as bit error rate (BER), Q-factor, signal-to-noise ratio (SNR), received power, communication range, and reliability are analyzed based on the simulation results. The proposed FSO communication system provides high data rates, improved power efficiency, better resilience to atmospheric impairments, reliable communication links under different weather conditions, and a practical solution for high-speed and high-bandwidth communication in various applications.

Enhancement of spectral access of optical OFDM system using cognitive radio

Abstract This work presents the research on spectrum sensing in optical OFDM (orthogonal frequency division multiplexing) systems. Spectrum sensing is crucial for cognitive radio networks to efficiently utilize available spectral resources. Various spectrum sensing techniques are explored, including energy detection (ED), cyclostationary feature detection (CD), and matched filter detection (MF). These techniques enable the detection of occupied and unoccupied subcarriers in optical OFDM systems, facilitating dynamic spectrum access and spectrum sharing. The research highlights the importance of accurate spectrum sensing in maximizing spectral efficiency, optimizing network performance, and enabling coexistence of multiple users in optical OFDM-based cognitive radio networks. The findings contribute to the development of future wireless communication systems. The parameters such as probability of detection (pd), probability of false alarm (pfa), bit error rate (BER), and power spectral density (PSD) is analysed using computer simulation. The simulation results reveal that the MF achieved a gain of 2.8 dB and 3.6 dB as compared with conventional spectrum sensing algorithms.

Optical OFDM waveform construction by combining complex symbols’ component of IFFT

In optical communication systems, orthogonal frequency division multiplexing (OFDM) is widely used to combat inter-symbol interference (ISI) caused by multipath propagation. Optical systems which use intensity modulation and direct detection (IM/DD) can only transmit real valued symbols, but the inverse discrete Fourier transform (IDFT) or its computationally efficient form inverse-fast Fourier transform (IFFT) required for the OFDM waveform construction produces complex values. Hermitian symmetry is often used to obtain real valued symbols. For this purpose, some trigonometric transformations such as discrete cosine transform (DCT) are also used; however, these transformations can eliminate the ISI only under certain conditions. In this paper, we propose a completely different method for the construction of OFDM waveform with IFFT to obtain real valued symbols by combining the real and imaginary parts (CRIP) of IFFT output electrically (E-CRIP) or optically (O-CRIP). Analytical analysis and simulation works are presented to show that compared to the Hermitian symmetric system, the proposed method slightly increases the spectral efficiency, eliminates ISI, significantly reduces the amount of needed calculation, and does not affect the error performance. In addition, the O-CRIP method is less affected by clipping noise that may occur due to the imperfections of the transmitter front-ends.