Optical Microscopy Images Research Articles

Femtosecond Laser‐Induced Recrystallized Nanotexturing for Identity Document Security With Physical Unclonable Functions

AbstractCounterfeit identity (ID) documents pose a serious threat to personal credit and national security. As a promising candidate, optical physical unclonable functions (PUFs) offer a robust defense mechanism against counterfeits. Despite the innovations in chemically synthesized PUFs, challenges persist, including harmful chemical treatments, low yields, and incompatibility of reaction conditions with the ID document materials. More notably, surface relief nanostructures for PUFs, such as wrinkles, are still at risk of being replicated through scanning lithography or nanoimprint. Here, a femtosecond laser‐induced recrystallized silicon nanotexture is reported as latent PUF nanofingerprint for document anti‐counterfeiting. With femtosecond laser irradiation, nanotextures spontaneously emerge within 100 ms of exposure. By introducing a low‐absorption metal layer, surface plasmon polariton waves are excited on the silicon‐metal multilayer nanofilms with long‐range boosting, ensuring the uniqueness and non‐replicability of the final nanotextures. Furthermore, the femtosecond laser induces a phase transition in the latent nanotexture from amorphous to polycrystalline state, rather than creating replicable relief wrinkles. The random nanotextures are easily identifiable through optical microscopy and Raman imaging, yet they remain undetectable by surface characterization methods such as scanning electron and atomic force microscopies. This property significantly hinders counterfeiting efforts, as it prevents the precise replication of these nanostructures.

Crystallization, thermal, and compatibility performances of poly (butylene succinate) (PBS)/poly((R)‐3‐hydroxybutyrate‐co‐(R) 3‐hydroxyhexanoate) (PHBHHx) blends

AbstractBiodegradable materials provide protective properties comparable to conventional plastics while diminishing reliance on nonrenewable resources. Environmentally friendly polymer blends were prepared by melting poly(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate) (PHBHHx) with poly (butylene succinate) (PBS). PBS was synthesized through esterification and polycondensation using 1,4‐butanediol and succinic acid, with tetrabutyltitanate as the catalyst. The PHBHHx is supplied by Bulepha®PHA Company of China, model number BP330. The effects of PHBHHx content on thermal behavior, compatibility, and thermal stability of PBS/PHBHHx blends were systematically investigated. Differential scanning calorimetry (DSC) results indicated that the addition of PHBHHx influenced the crystallization behavior, the crystallization temperature (Tc) of PBS decreased meanwhile, the crystallization half‐time of PBS is reduced to 1.5 min compared with neat PBS (5 min) after isothermal is crystallized at 95°C. Polarized Optical Microscopy (POM) images also revealed that crystallization rate accelerated in the blend with increasing PHBHHx content. Rheological and Scanning Electron Microscopy (SEM) analysis demonstrated that incorporating a significant content of PHBHHx reduced compatibility between PBS and PHBHHx. Mechanical property testing indicates that the addition of PHBHHx reduced the toughness of blends. Additionally, the addition of a small amount of PHBHHx imparts a higher crystallinity (56%) and heat resistance of the PBS/PHBHHx blends (78°C) was higher than neat PBS (74°C).Highlights Laboratory synthesis of high molecular weight PBS. Optimal ratios improved crystallinity and thermal stability of blends. A systematic study of the crystallization properties of blends.

FABRICATION AND CHARACTERIZATION OF DISSOLVING MICRONEEDLE PATCH USING 3D PRINTED MASTER

Objective: The purpose of this study was to fabricate a dissolving microneedle patch using a 3D-printed master and characterize it using various techniques. Methods: Dissolving microneedle patches were developed using Computer-Aided Design (CAD) software and 3D printing. Polydimethylsiloxane (PDMS) reverse molds were cast from the 3D-printed masters and filled with a solution of 20% Chitosan Oligosaccharide (COS) and 20% Polyvinyl Alcohol (PVA). The patches were dried at room temperature and characterized using Scanning Electron Microscopy (SEM), Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and in vitro skin penetration studies. Results: Optical microscopy and SEM images showed the formation of a uniform microneedle. The peak at 1248 cm⁻¹ in the ATR-FTIR spectrum indicates the formation of cross-links between certain PVA radical groups and COS. XRD revealed that both polymers blended well and showed partial crystallinity, with peaks at 2θ = 11.39°, 2θ = 20°, and 2θ = 41°. DSC and TGA analyses revealed that the blend could withstand high temperatures with good stability at temperatures up to 200 °C. In vitro skin penetration studies confirmed that microneedles could successfully penetrate the skin, indicating their potential for effective transdermal drug delivery. Conclusion: This study demonstrated that COS/PVA dissolving microneedles fabricated using 3D printing and micro-molding have significant potential for transdermal drug delivery.

A soft scanning electron microscopy for efficient segmentation of alloy microstructures based on a new self-supervised pre-training deep learning network

To provide an on-site metallographic segmentation using only optical microscopy images, sSEM-Net, a soft scanning electron microscopy network, is developed based on a self-supervised pre-training deep learning framework. During model training, only a sparse collection of SEM images is necessary for annotation assistance. By integrating CNN and Transformer, sSEM-Net efficiently utilizes global context information while mitigating data dependency and computational resource constraints. Using only readily available optical microscopy images as input, sSEM-Net achieves metallographic segmentation comparable to SEM images, catering to rapid and cost-effective industrial needs. This methodology leverages non-destructive inspection attributes, catering to rapid and cost-sensitive industrial requirements. The efficacy of the proposed sSEM-Net is demonstrated through metallographic structure analysis of TC4 titanium alloy, with potential extensions to other alloy types.

Impact of Graphene Nanoparticles on DLP-Printed Parts' Mechanical Behavior

Digital Light Processing (DLP) is one of the most promising techniques among the additive manufacturing (AM) technologies for polymer resin. The polymer parts produced through this technique demonstrate a diverse range of characteristics that can be specifically designed for various fields of application. Specific attributes can be attained by utilizing polymer composites composed of multiple materials in numerous ratios. This research delves into evaluating and comparing different properties, including microstructure, surface texture, and mechanical behavior, of resin-based polymer composites fabricated using the DLP 3D printing technology. To achieve this, specimens have been printed using photopolymer resin as the base material, with varying percentages of graphene nanoparticles added to the resin. Tensile tests and particle analysis based on optical microscope images validate that optimizing parameters, especially the energy setting of the printer, significantly impact the printed samples' strength, surface texture, layering, and microstructure. The findings indicate that at a specific percentage of graphene, such as 0.5%, there is an increase in tensile strength by 38.1%, Young’s modulus by 54.7%, and Yield strength by 11.2%, accompanied by an improved surface roughness. A graphene concentration of 0.75% results in diminished tensile strength, yield strength, and Young’s modulus. The significance of fine-tuning printing parameters to achieve desired properties in resin-based polymer composites manufactured via 3D printing is highlighted.

Simulation-based analysis of impact of CNT dispersion on hydration of cement paste

Dispersion of carbon nanotubes (CNTs) is one of the key factors determining the mechanical properties of cement composites. This study analyzed impact of CNT dispersion on hydration of cement paste. An image analysis method based on optical microscopy images was proposed to quantitatively consider the CNT dispersion. To quantify CNT dispersion, this paper proposed PCNT, which is the percentage of a 1 μm2 space containing CNTs within entire water volume. To investigate CNT dispersion effect, the same amount of CNT was classified into six steps (S1, S5, S15, S30, S50, and S100) according to PCNT. The relationship between CNT dispersion and the hydration, porosity, and compressive strength of the cement paste was analyzed using a CEMHYD3D considered CNT effect. The optimal CNT dispersion for 0.1 wt% CNT reinforcement in a cement paste with water-to-cement ratio of 0.3 was found to be 15 % PCNT. The improvement in CNT dispersion resulted in acceleration of hydration of cement paste, improvement in compressive strength, and densified microstructure.

Dispersion and self-assembly of 2,5-dimercapto-1,3,4-thiadiazole (DMTD) functionalized silver QDs in 6 CHBT liquid crystal

ABSTRACT Silver nanoparticles were synthesised using silver nitrate and tri-sodium citrate and were functionalized with 2,5-Dimercapto-1,3,4-thiadiazole (DMTD) linking molecules. Functionalized silver nanoparticles dispersed within 4-(trans-4-n hexylcyclohexyl) isothiocyanatobenzoate (6CHBT) liquid crystal (LC) matrices have attracted significant attention because of their potential for tailoring tuneable surface plasmonic, optical, and electronic properties by controlling the self-assembly of silver dots. The unique combination of functionalized nanoparticles and 6CHBT LCs offers a versatile platform for manipulating interactions at the nanoscale. The dispersion of functionalized Ag nanoparticles within the LCs appears to substantially modify the plasmonic and opto-electronic properties of the Ag QDs. The formation and morphology of the self-assembled structures of silver nanoparticles were confirmed by Optical and Scanning Electron Microscopy. Optical microscopy (OM) and Scanning Electron Microscopy (SEM) images of Ag-doped 6CHBT confirmed the formation of nano-micro spheres, as well as ring and rod-like structures in LC media. We have used High-Resolution X-ray diffraction (HR-XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Surface-Enhanced Raman Spectroscopy (SERS), Optical Microscopy (OM), Scanning Electron Microscopy (SEM), Ultraviolet-visible-near-infrared Spectroscopy (UV-Vis-NIR), and Fluorescence (FL) Spectroscopy. We calculated the electronic properties such as the bandgap of the synthesised Ag QDs and functionalized Ag QDs using UV-Vis-NIR and Tauc’s plot curves. Surface-enhanced Raman spectroscopy, Optical microscopy, SEM, and UV-Vis-NIR spectral data were used to correlate the properties of the LC and QDs hybrid systems.

Unlocking Intracellular Protein Delivery by Harnessing Polymersomes Synthesized at Microliter Volumes using Photo-PISA.

Efficient delivery of therapeutic proteins and vaccine antigens to intracellular targets is challenging due to generally poor cell membrane permeation and endolysosomal entrapment causing degradation. Herein, these challenges are addressed by developing an oxygen-tolerant photoinitiated polymerization-induced self-assembly (Photo-PISA) process, allowing for the microliter-scale (10µL) synthesis of protein-loaded polymersomes directly in 1536-well plates. High-resolution techniques capable of analysis at a single particle level are employed to analyze protein encapsulation and release mechanisms. Using confocal microscopy and super-resolution stochastic optical reconstruction microscopy (STORM) imaging, their ability to deliver proteins into the cytosol following endosomal escape is subsequently visualized. Lastly, the adaptability of these polymersomes is exploited to encapsulate and deliver a prototype vaccine antigen, demonstrating its ability to activate antigen-presenting cells and support antigen cross-presentation for applications in subunit vaccines and cancer immunotherapy. This combination of ultralow volume synthesis and efficient intracellular delivery holds significant promise for unlocking the high throughput screening of a broad range of otherwise cost-prohibitive or early-stage therapeutic protein and vaccine antigen candidates that can be difficult to obtain in large quantities. The versatility of this platform for rapid screening of intracellular protein delivery can result in significant advancements across the fields of nanomedicine and biomedical engineering.

Synthesis and structural identification of 3,6-Bis(3,5- dimethylpyrazol-1-yl)-1,2,4,5-tetrazine (BDT)

3,6-Bis(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine (BDT) has emerged as a key intermediate for accessing other promising tetrazine-based high-energy-density compounds. The study presented the step-by-step process of synthesizing BDT while thoroughly analyzing and investigating its crystal structure. The chemical structure of BDT was characterized using spectroscopic techniques such as FT-IR, 1H-NMR, 13C-NMR, and data from PXRD and CCDC 254069. BDT was analyzed using various theoretical techniques, such as 2D fingerprint and Hirshfeld surface. The morphology of the BDT crystals was evaluated through optical microscope images. The results show that BDT crystallizes in a monoclinic space group P21/c, with four molecules per unit cell (Z=4) with the calculated lattice parameters as follows: a = 11.37 Å, b = 16.67 Å, c = 7.74 Å. The proportion of interactions of N...H and H...H of the total Hirshfeld surface area of BDT were 31.9% and 45.7%, respectively. ESP's maximum negative and positive values are -212.9 kJ.mol-1 and 65.6 kJ.mol-1, respectively.

Development of Fiber-Reinforced Polymer Composites for Additive Manufacturing and Multi-Material Structures in Sustainable Applications

This study investigates the mechanical properties of carbon and natural fiber-reinforced Polylactic Acid (PLA) and Polyethylene Terephthalate Glycol (PETG) composites produced via Additive Manufacturing (AM), focusing on Material Extrusion (MEX). The performance of filaments made from pre-consumer recycled PLA (rPLA) and PETG, with varying weight percentages of hemp and jute short fibers, was evaluated through tensile testing. Comparisons were made between the original filaments (PLA, carbon fiber-reinforced PLA [CF–PLA], and PETG) and their recycled versions. Multi-material compositions—neat PLA and PETG, single-graded (PLA + CF–PLA, PETG + CF–PETG), and multi-gradient (PLA + CF–PLA + PLA, PETG + CF–PETG + PETG)—were analyzed for mechanical properties. Optical microscope images of multi-material specimens were captured before and after fracture to assess failure mechanisms. The results indicate that the original CF–PETG filaments achieved a tensile strength of 50.14 MPa, which is higher than rPLA, PLA, and CF–PLA by 2%, 70%, and 6.7%, respectively. The re-manufactured PLA filaments reinforced with 7 wt% hemp fibers exhibited a tensile strength of 38.8 MPa, representing a 29% increase compared to the original PLA filaments and a 26% improvement over recycled PLA. Additionally, incorporating 7% jute fiber into PETG resulted in a tensile strength of 62.38 MPa, reflecting a 12% improvement over the original PETG filaments and a 15% increase compared to the recycled PETG filaments. Among specimens produced by AM, CF–PLA and rPLA demonstrated the highest tensile and compressive strengths. However, multi-material composites showed reduced mechanical performance compared to neat PLA and PETG, highlighting the need for improved interlayer adhesion. This study emphasizes the importance of optimizing material combinations and fiber reinforcement to enhance the mechanical properties of composites produced through AM.

Super-resolution imaging reveals the role of DDR1 cluster in NSCLC proliferation

Discoidin domain receptor 1 (DDR1), a transmembrane protein, is crucial in tumor development. Prior studies have demonstrated a significant correlation between protein cluster distribution on the cell membrane and tumor evolution. However, the precise spatial distribution characteristics of DDR1 on cell membranes and their impact on tumor development remain unclear. In this study, we conducted gene expression analysis to investigate DDR1 expression in non-small cell lung cancer (NSCLC) and its association with patient prognosis. We also employed direct stochastic optical reconstruction microscopy (dSTORM) imaging to examine DDR1's spatial distribution in NSCLC cells and tissues. Our findings indicate that DDR1 forms larger, tighter, and more abundant clusters in cancer cells and tissues compared to their normal counterparts. Notably, we observed that the enhanced aggregation of DDR1 clusters increased the likelihood of interaction with SRC, thereby activating the SRC-STAT3 signaling pathway in NSCLC cells and promoting cell proliferation. This study provides novel insights into the role of DDR1 aggregation in tumor proliferation, confirms DDR1 as a potential tumor marker, and serves as a valuable resource for future drug development.

Enhancing mechanical properties of 2024-Aluminium Alloy Matrix Composite strengthened by Y2O3 ceramic particles

The development of high-strength, low-weight composite materials has been a high-priority demand in the structural, aerospace, automotive, renewable energy, and sports equipment sectors. Micro-particle size Yttrium oxide (Y2O3) has been utilized to enhance the microstructure and mechanical characteristics of the 2024-Al alloy. The stir-casting technique is employed to prepare 2024-Al alloy and aluminum matrix composites (AMCs) with different Y2O3 weight fractions (1 %, 2 %, and 3 %). Scanning electron microscope ESM with EDS analysis and optical microscope imaging have been used to assess the development in the microstructure of AMCs. Furthermore, optical microscope images have been analyzed by using image processing software, ImageJ to evaluate development in microstructure grain size. Vickers' micro-hardness, tensile strength, elongation, and wear-resistant tests were conducted to assess the mechanical properties of AMCs. AMC image analysis results demonstrated a significant reduction in microstructure grain size. The highest reduction in grain size was recorded when adding 2 wt. % of Y2O3, which was approximately 22.5 % smaller than that of the plain alloy. Other mechanical test results demonstrated an increase in the hardness and tensile strength of AMCs compared with the plain alloy by approximately 58 % and 116 %, respectively, upon the addition of 2 wt. % of Y2O3, also tensile test shows increasing of AMCs elongation at failure point with increasing Y2O3 content, 132 % upon adding 3 wt. %. Finally, wear tests show a decrease in the AMC wear rate with an increasing Y2O3 weight fraction compared to the plain alloy.

The impact of heat treatment process on the drilling characteristics of Al–5Si–1Cu–Mg alloy produced by sand casting

Aluminum–Silicon (Al–Si) based materials are commonly preferred in engineering studies requiring high mechanical performance as an alternative to steel materials. These alloys are especially preferred in the automotive industry, aerospace components and heavy machinery parts. In post-casting processes, machining operations are of great importance for high geometric precision, surface quality and longer fatigue life in mechanical environments. In this research, the microstructural, mechanical and machining characteristics of the Al–5Si–1Cu–Mg material produced by sand casting method in both as-cast (AC) and heat-treated (HTed) (Solid solution, quenching and aging-SQA) states were experimentally investigated. Microstructural examinations were carried out with optical microscope and SEM images. Mechanical properties were determined by tensile and hardness tests. Then, drilling experiments were performed in the CNC vertical machining center with 8 mm diameter uncoated HSS (High Speed Steel) cutting tools at constant cutting conditions (i.e., cutting speed-V: 125 m/min, feed rate-f: 0.05 mm/rev and depth of cut-DoC: 15 mm). In microstructural investigations, it was determined that the microstructure of the Al–5Si–1Cu–Mg material in AC state consists of α-Al, eutectic Si, β-Fe (β-Al5FeSi) and π-Fe (π-Al8Mg3FeSi6) intermetallics. After the SQA, the existing phases generally exhibited a spherical structure, and it was seen that the β phase in the microstructure transformed into the Ɵ (Al7FeCu2) phase. SQA improved the hardness, yield and tensile durability of the material, whereas decreasing the elongation to fracture. SQA process improved the machining characteristics of the material by decreasing thrust force, moment, surface roughness and built-up edge (BUE) formation. The machined subsurface structure of HTed alloy under constant cutting conditions was determined to be more stable and smooth and the machined surface microhardness of HTed alloy was higher compared to as-cast alloy due to the effect of solid precipitation hardening. In addition, shorter and more broken chips occurred in the machining of HTed alloys due to the effect of low elongation to fracture.

Nanoscale organization of cardiac calcium channels is dependent on thyroid hormone status.

Thyroid hormone dysfunction is frequently observed in patients with chronic illnesses including heart failure which increases risk of adverse events. This study examined effects of thyroid hormones (TH) on cardiac T-tubule (TT) integrity, Ca2+ sparks, and nanoscale organization of ion channels in excitation-contraction (EC)-coupling, including L-type calcium channel (Cav1.2), ryanodine receptor-type 2 (RyR2), and junctophilin-2 (Jph2). TH deficiency was established in adult female rats by propyl-thiouracil (PTU) ingestion for 8 weeks; followed by randomization to continued PTU without or with oral triiodo-L-thyronine (T3; 10 ug/kg/d) for two additional weeks (PTU+T3). Confocal microscopy of isolated cardiomyocytes (CM) showed significant misalignment of TTs, and increased Ca2+ sparks in thyroid-deficient CMs. Density-Based Spatial Clustering of Applications with Noise (DBSCAN) analysis of STochastic Optical Reconstruction Microscopy (STORM) images showed decreased (p<0.0001) RyR2 cluster number per cell area in PTU CMs compared to euthyroid (EU) control myocytes, and this was normalized by T3-treatment. Cav1.2 channels and Jph2 localized within 210 nm radius of the RyR2 clusters were significantly reduced in PTU myocytes, and these values were increased with T3 treatment. A significant percentage of the RyR2 clusters in the PTU myocytes had neither Cav1.2 or Jph2, suggesting fewer functional clusters in EC-coupling. Nearest neighbor distances between RyR2 clusters were greater (p<0.001) in PTU cells compared to EU and T3-treated CMs that corresponds to disarray of TTs at the sarcomere z-discs. These results support a regulatory role of T3 in the nanoscale organization of RyR2 clusters and co-localization of Cav1.2 and Jph2 in optimizing EC-coupling.

Inhalable Advanced Co-Spray Dried Microparticles/Nanoparticles of a Novel RhoA/Rho Kinase Inhibitor with Lung Surfactant Biomimetic Phospholipids for Targeted Lung Delivery.

Co-spray dried inhalable powder formulations of fasudil monohydrochloride salt (FMCS) and inhalable lung surfactant-based nanocarriers composed of synthetic phospholipids, zwitterionic DPPC (1,2-palmitoyl-sn-glycero-3-phosphocholine) and anionic DPPG (1,2-dipalmitoyl-sn-glycero-3-[phosphor-rac-1-glycerol]) sodium salt, were designed and optimized using organic solution advanced spray drying. FMCS can potentially be used for the treatment of various complex pulmonary diseases with this current work focusing on pulmonary arterial hypertension. Comprehensive physicochemical characterization, electron and optical microscopy imaging, thermal analysis, molecular fingerprinting spectroscopy, in vitro aerosol dispersion performance with human dry powder inhaler (DPI) devices, in vitro membrane permeation and drug release, and in vitro human cellular studies were conducted. Well-defined, small, and smooth nanoparticles/microparticles in the solid state were engineered at different molar ratios of FMCS/DPPC/DPPG (25:75, 50:50, and 75:25) and successfully produced as inhalable powders having the properties necessary for targeted pulmonary delivery as dry powder inhalers. In vitro aerosol performance demonstrated excellent aerosol dispersion with different DPI devices. The phospholipid bilayer biophysical properties were confirmed and retained following cospray drying. Sustained release of fasudil drug and in vitro biocompatibility were demonstrated on human lung cells from different airway regions.

Fluorescent nanoplastics increase the toxic effects of Graphene oxide nanoparticles in freshwater algae Scenedesmus obliquus

The increased usage of Graphene oxide (GO) in various industrial applications led to their entry into freshwater systems. Other secondary contaminants like nanoplastics (NPs) often co-exist with GO in the environment. This study examines the possible role of fluorescent nanoplastics (FNPs) in modifying the toxic effects of GO on freshwater algae Scenedesmus obliquus. Selected concentrations of GO (0.1, 1, and 10 mg L−1) were combined with a fixed concentration of FNPs (1 mg L−1) to perform combinational toxicity tests on algae. FNPs significantly enhanced the toxic effects of GO in the mixtures in comparison with the pristine GO. In addition to the cytotoxic effects, oxidative stress parameters like total ROS generation and malondialdehyde (MDA) production also increased in the case of the combined pollutants. The antioxidant enzymatic activities like catalase (CAT) and superoxide dismutase (SOD) in the cells were also assessed. Algal exposure to the pristine pollutants and their mixture led to a notable decrease in photosynthetic activities in the cells, with the mixed pollutants aggravating the loss of activity. The interactive toxic effects of the contaminants when present in mixtures were evaluated using Abbotts' Independent action modelling. Furthermore, optical microscopic images revealed the morphological changes in the algal cells after exposure to the contaminants both in the pristine and combined forms.

Leukocyte detection based on convolutional neural network fusion with color Fourier ptychographic microscopy

Abstract In the field of optical microscopic imaging, color Fourier Ptychographic Microscopy (FPM) technology has attracted much attention due to its advantages of large field of view, high resolution, and quantitative phase imaging. In this paper, a color FPM fusion algorithm based on deep learning is proposed in combination with Convolutional Neural Networks (CNN) and applied to leukocyte detection. Firstly, this paper introduces a fusion model of a convolutional neural network based on the traditional color FPM imaging method and fuses low-resolution color images and high-resolution grayscale images through a multilayer convolutional network. This method improves the quality of reconstructed images while reducing the reconstruction time. Secondly, this paper constructs a leukocyte detection dataset by using an improved color FPM reconstruction algorithm and builds a leukocyte detection system based on the YOLOv7 architecture. This paper shows that combining convolutional neural networks with color FPM technology can provide higher-quality reconstructed images in medical imaging and cell detection, which provides strong technical support for digital pathology and medical diagnosis.

The Inhibitory Effects of Anti-GPC3 Antibody on Wnt/β-Catenin Signaling Pathway as a Biological Therapy in Liver Cancer.

To investigate the effects of anti-GPC3 antibody on the Wnt/catenin pathway in liver cancer biology, thus providing a new target for the biological treatment of the disease. A total of 12 BALB/C experimental nude mice were selected as experimental objects. The mice were all male, weighed 15-20g and aged 4-5weeks. First, mouse liver cancer models were constructed. Then, the HepG2 liver cancer cells in logarithmic growth period were inoculated into the caudal veins of mouse models. On the 3rd day after inoculation, the tumor formations of nude mice were observed. Second, the anti-GPC3 antibody was designed and constructed, and the activity of anti-GPC3 antibody was detected. The mouse models were divided into the experimental group (EG) and the control group (CG), with 6 mice in each group. In the EG, mice were injected with 3mg/kg of anti-GPC3 antibody in the caudal veins once a day for three consecutive days, while in the CG mice were injected with the same amount of saline as the control. Mice in both groups received 3 injections in total. After the last administration, all mice were euthanized using the decapitation method following anesthesia with ethyl ether. The liver cancer cells of nude mice were extracted and cultured in DMEM medium. The effects of anti-GPC3 antibody on Wnt/β-catenin in liver cancer nude mice and the effects of anti-GPC3 antibody on epithelial-mesenchymal transition (EMT) in mouse liver cancer cells were observed. The bodyweight, liver weight and index of mice in the EG increased significantly (P < 0.05). The serum alanine transaminase (ALT), aspartate transaminase (AST), alkaline phosphatase (ALP) levels of mice in the EG were reduced than those in the CG (P < 0.05). Compared with the CG, the superoxide dismutase (SOD) concentration increased, while the malonaldehyde (MDA) concentration decreased in the liver tissues of mice in the EG (P < 0.05). There was binding activity between GPC3 recombinant protein and the antibody; the affinity constant was KD = 1.4 × 10-6 M, compared with the commercial anti-GPC3 antibody, the affinity constant was lower. The interference effects of siRNA on anti-GPC3 antibody were detected by Western Blot. After the injection of anti-GPC3 antibody, the expression of β-catenin siRNA in liver cancer cells decreased significantly. The optical microscope images of mouse liver cancer cells in groups were compared. Through down-regulating the Wnt/β-catenin by anti-GPC3 antibody, the morphology of epithelial cells was maintained, the cells were arranged orderly, the cubic structure was kept stable, and the occurrence of EMT was reduced. However, in the CG, the structure of mouse liver cancer cells was disordered, the obvious EMT occurred (P < 0.05). Through down-regulating the expression of Wnt/β-catenin by anti-GPC3 antibody, the invasiveness, and metastasis of liver cancer cells could be effectively inhibited. Compared with the CG, the number of cells passing through the chamber was significantly reduced (P < 0.05). The anti-GPC3 antibody had inhibitory effect on Wnt/β-catenin signaling pathway. The occurrence of EMT and the invasiveness of liver cancer cells were inhibited effectively. Therefore, the anti-GPC3 antibody could be used as a reference for clinical molecular targeted therapy of liver cancer.

Feasibility study of utilizing Autoclaved Aerated Concrete (AAC) waste for the production of cold bonded lightweight artificial aggregate using high volume fly ash (HVFA) binders

Autoclaved Aerated Concrete (AAC) is a popular construction material used for partitions and insulation in buildings. At the end of its service life, AAC (Autoclaved Aerated Concrete) will be demolished and subsequently disposed of in landfills, thereby creating depository problem. Therefore, the study of reutilization and recycling of AAC waste is imperative. Artificial aggregate production can be an alternative to the reutilization of AAC waste. This paper assesses the feasibility of using Autoclaved Aerated Concrete Powder (AACP) waste as a raw material for the production of artificial aggregate and investigate its physico-mechanical properties. The investigation incorporates the comparison of cement-based binder with high-volume fly ash (HVFA) binder with different replacement levels of cement. The study uses image analysis based on photographic, optical microscopic, and scanning electron microscopy (SEM) images, to describe the porosity of the aggregate. The results show that the AACP aggregates with both cement and HVFA binders meets the current industry requirement for density and cylinder crushing strength as lightweight artificial aggregate. The appropriate binder content lies between 30 % and 40 %. The best cement to fly ash ratio in HVFA binder is determined to be of 1:1 with 50 % replacement of cement with fly ash. Image analysis showed that the porosity largely affected the properties of the AACP aggregate such as density and water absorption. However, further investigation into the reducing high-water absorption of AACP aggregates is necessary to improve their overall quality.

Elucidating the effects of metal transfer modes and investigating the material properties in wire-arc additive manufacturing (WAAM)

AbstractStudies have shown the influence of WAAM process parameters on mechanical properties, bead formation, dimensional accuracy, and microstructure. However, metal transfer modes and their interactions with input variables have not been investigated thoroughly. Therefore, short/spray, pulse and double pulse modes were investigated in this study at different current levels. Bead-on-plate trials were conducted by depositing ER70S-6 wire to investigate bead morphology, dilution, microstructure, and hardness. The study was supported by a detailed statistical approach, including analysis of variance (ANOVA) and regression analysis. Similarly, the combined effects of hatch distance and current were studied on bead formation in multi-layer deposits. Moreover, a thin wall and a cubic structure were deposited to realize the WAAM capability for larger depositions. The microstructures of thin wall and cubic structure were analyzed using optical microscopy (OM) and scanning electron microscopy (SEM). The study concludes that metal transfer modes at various currents significantly influence bead geometry, microstructure and hardness. The microstructure of bead-on-plate trials show fine lamellar structure at low current in all modes. Higher current results in coarse grains with a polygonal and columnar morphology. The hardness shows a decreasing trend as the current increases. The combined effects of current and hatch distance alter bead morphology; however, an optimized combination yields smoother surfaces. The microstructure of thin wall showed a slight anisotropy along the building direction. The presence of small pores was witnessed from OM and SEM images. Similarly, the cubic structure showed a more homogeneous microstructure with much lower porosity. The hardness profile of the thin wall exhibited small fluctuations along the building direction, while that of the cubic structure was more uniform.