Impact of Graphene Nanoparticles on DLP-Printed Parts' Mechanical Behavior

Abstract

Digital Light Processing (DLP) is one of the most promising techniques among the additive manufacturing (AM) technologies for polymer resin. The polymer parts produced through this technique demonstrate a diverse range of characteristics that can be specifically designed for various fields of application. Specific attributes can be attained by utilizing polymer composites composed of multiple materials in numerous ratios. This research delves into evaluating and comparing different properties, including microstructure, surface texture, and mechanical behavior, of resin-based polymer composites fabricated using the DLP 3D printing technology. To achieve this, specimens have been printed using photopolymer resin as the base material, with varying percentages of graphene nanoparticles added to the resin. Tensile tests and particle analysis based on optical microscope images validate that optimizing parameters, especially the energy setting of the printer, significantly impact the printed samples' strength, surface texture, layering, and microstructure. The findings indicate that at a specific percentage of graphene, such as 0.5%, there is an increase in tensile strength by 38.1%, Young’s modulus by 54.7%, and Yield strength by 11.2%, accompanied by an improved surface roughness. A graphene concentration of 0.75% results in diminished tensile strength, yield strength, and Young’s modulus. The significance of fine-tuning printing parameters to achieve desired properties in resin-based polymer composites manufactured via 3D printing is highlighted.