Optical Field Distribution Research Articles

Study on the mechanism of laser-induced breakdown and damage performance of internal defects in transparent materials through local optical field modulation

This paper establishes a photothermal damage model for bubble impurities affecting laser optical field modulation based on Mie scattering theory and incorporates the effects of optical field modulation. This model elucidates the evolution mechanism of synergistic damage in fused silica, with simulation results validated through experimental verification. A novel characterization of optical breakdown due to bubble impurities is proposed, occurring on a millisecond timescale through the dynamic evolution of combustion waves. The model delineates the influence of bubble size and spacing on optical field distribution, temperature, stress distribution, and their evolutionary behaviors. The modulation of the optical field due to double bubble impurities creates a localized “hot spot,” resulting in a differential transverse contraction stress at the edges of the bubble impurities, thereby reducing the damage threshold of fused silica. The spacing of 1.1 λ represents the enhancement node for optical field modulation by double bubble impurities. Furthermore, localized oscillations in the optical field arise when the spacing between the double bubbles exceeds 1.1 λ, attributed to changes in the refractive index at the bubble defects and resonance oscillations generated by optical field modulation. This study not only enhances our understanding of the optical field modulation processes occurring at 1064 nm in the presence of bubble defects but also establishes a theoretical foundation for detecting internal defects at this wavelength without inducing surface damage.

High-sensitivity humidity sensor based on Mach-Zehnder interferometer in seven-core fiber

A Mach-Zehnder Interferometer (MZI) based on seven-core fiber (SCF) for humidity sensing is proposed and experimentally demonstrated. The MZI is formed by sandwiched a section of SCF in between two single mode fibers (SMFs), while a fiber taper and a brief multimode fiber (MMF) act as fiber couplers to excite and couple the intermodal interference in the SCF. The optical field distribution and coupling efficiency of the MZI with different SCF lengths are analysed. The theoretical results show that the MZI is sensitive to SCF lengths, and it is expected to obtain highly sensitive humidity response. Humidity sensing experiments shows a high sensitivity of 0.6603 nm/%RH over a relative humidity (RH) range of 44–83 %RH, and the maximum measurement uncertainty introduced by the long-term stability is 0.0006 %RH. Human respiration measurement exhibits the response time and recovery time of the MZI are 0.44 s and 1.24 s respectively. The temperature effect is also experimentally investigated. Such an all-fiber MZI presents advantages of simple configuration, high sensitivity and good stability, making it has potential in humidity measurement fields.

Enhancing Performance in Top‐Illuminated Shortwave Infrared Organic Photodetectors via Microcavity Resonance

AbstractShortwave infrared (SWIR) image sensors have unique functions in many optical applications, leading to widespread attention in developing next‐generation materials and photodetector technologies. Organic photodetectors (OPDs) are highly promising due to their flexibility in molecular design and processability. However, integrating OPDs with silicon readout integrated circuits (ROICs) poses numerous challenges, often resulting in underestimated device performance and limiting technological progress. To address the requirements of integrating top‐illuminated OPD with ROICs and to enhance the external quantum efficiency (EQE), optical microcavities are introduced into the OPDs. The EQE in the SWIR region can be effectively enhanced by properly adjusting the thicknesses of the photoactive layer (PAL) and interlayers. Simulations of the optical field distribution further support the active functions of the microcavity structure. The spatial variation of the microcavities allows the spectral response to shift from 1000 to 1400 nm, and the optimized device achieves an EQE of 25.8% at 1260 nm. Finally, the OPDs are integrated with a silicon‐based test kit, and the results reveal comparable sensing performance, demonstrating the high potential of microcavity resonance for device integration. This design effectively improves the integration of OPDs with traditional ROICs and advances SWIR‐based organic image sensor technology further toward commercialization.

Simulations of Femtosecond-Laser Near-Field Ablation Using Nanosphere under Dynamic Excitation.

Femtosecond lasers have garnered widespread attention owing to their subdiffraction processing capabilities. However, their intricate natures, involving intrapulse feedbacks between transient material excitation and laser propagation, often present significant challenges for near-field ablation predictions and simulations. To address these challenges, the current study introduces an improved finite-difference time-domain method (FDTD)-plasma model (plasma)-two-temperature model (TTM) framework for simulating the ablation processes of various nanospheres on diverse substrates, particularly in scenarios wherein dynamic and heterogeneous excitations significantly influence optical-field distributions. Initially, FDTD simulations of a single Au nanosphere on a Si substrate reveal that, with transitions in the excitation states of the substrate, the field-intensity distribution transforms from a profile with a single central peak to a bimodal structure, consistent with experimental reports. Subsequently, simulations of a polystyrene nanosphere array on a SiO2 substrate reveal that different excitation states of the nanospheres yield two distinct modes, namely near-field enhancement and masking. These modes cannot be adequately modeled in the FDTD simulations. Our combined model also considers the intrapulse feedback between the electromagnetic-field distribution resulting from near-field effects and material excitations. Furthermore, the model can quantitatively analyze subsequent electron-phonon coupling and material removal processes resulting from thermal-phase transitions. Consequently, our model facilitates predictions of the femtosecond-laser ablation of single nanospheres or nanosphere arrays with varying sizes and materials placed on substrates subjected to near-field effects.

Uniform intensity chiral optical field by multifocal synthesis.

Chiral optical beams that carry orbital angular momentum (OAM) have a broad range of applications such as optical tweezers, chiral microstructure fabrication, and optical communications. However, some chiral optical beams have inhomogeneous intensity distribution that limits the application in these fields. In this Letter, two different types of chiral optical fields with uniform intensity and arbitrary length were proposed based on the amplitude encoding method and multifocal synthesis. The intensity distribution of the chiral optical fields is determined by the distance between the focal points that can greatly extend the modulation length of the chiral optical field. Moreover, since each focal point contains modulable amplitude and phase, an arbitrary interception of the optical field can be realized by selectively retaining a part of the focal points. By partitioning the chiral optical field and assigning different topological charges, the OAM space-division multiplexing and independent tunability of the topological charges can be realized. In addition, the composite multi-petal vortex array formed by combining two different chiral optical fields can greatly enhance the information capacity of the optical communications and may have potential applications in fields such as particle manipulation.

88‐2: The Characteristics Analysis for Laser Cutting Process of Multilayers Display Panels

In this study, we analyzed the laser cutting characteristics of pulse transverse electrical discharge in gas at atmospheric pressure (TEA) CO2 and ultraviolet (UV) pulse laser processing in a multilayer display panels. First, the numerical calculation for was performed to confirm the thermal characteristics of each materials and optical field distribution at the interface of different material layers. Also, processing characteristics were experimentally confirmed by measuring cutting profile and adhesion characteristics of layer interface. Experimental results show that the characteristics of multi layers polymer cutting have different trend from those in a single‐layer because of the optical and thermal properties of each layer. In particular, the interface of layers had a substantial affect due to optical field distributions and thermal characteristic difference. Also, the optical absorbance of layers affect adhesion at the interface. The result suggests proper processing condition to enhance the laser ablation processing quality of multilayer display panel. In conclusion, understanding the characteristics of multilayer laser cutting processing is important for determining the optimal conditions for display panel micromachining and enhancing the quality of laser cutting for the cutting edge technology.

3DOF displacement sensor based on the self-imaging effect of optical micro-gratings

In recent years, there has been an increasing demand for a multiple degrees of freedom (DOF) measurement system with high performance and high integration. Here, we report a 3DOF displacement sensor based on the self-imaging effect of optical micro-gratings. The optical field distribution behind a micro-grating with a period of 3 µm is analyzed theoretically. The transmission properties of a double-grating structure are investigated in theory. In the experiment, 3DOF displacement measurement within a range of 1 mm is demonstrated. Using an interpolation circuit with a subdividing factor of 1000, displacement measurement with a theoretical resolution of 3 nm is realized. The experimental resolution is ∼8nm. An error within 2 µm is obtained experimentally within a range of 1 mm for 3DOF measurement. With a few optical components such as a beam splitter prism and beam expanders, the sensor shows potential in developing ultra-compact multi-DOF displacement measuring systems. Together with a nanometric resolution, the 3DOF displacement sensor has shown great potential in applications such as high-precision mechanical engineering and semiconductor processing.

Improved Design of Slope-Shaped Hole-Blocking Layer and Electron-Blocking Layer in AlGaN-Based Near-Ultraviolet Laser Diodes.

The injection and leakage of charge carriers have a significant impact on the optoelectronic performance of GaN-based lasers. In order to improve the limitation of the laser on charge carriers, a slope-shape hole-barrier layer (HBL) and electron-barrier layer (EBL) structure are proposed for near-UV (NUV) GaN-based lasers. We used Crosslight LASTIP for the simulation and theoretical analysis of the energy bands of HBL and EBL. Our simulations suggest that the energy bands of slope-shape HBL and EBL structures are modulated, which could effectively suppress carrier leakage, improve carrier injection efficiency, increase stimulated radiation recombination rate in quantum wells, reduce the threshold current, improve optical field distribution, and, ultimately, improve laser output power. Therefore, using slope-shape HBL and EBL structures can achieve the superior electrical and optical performance of lasers.

A theoretical study on optical field distribution and absorption of stacked thin films supported by a reflective back layer

The stacked thin films have recently been of great interest for enhancing the optical and thermal absorption of the system via their specific optical properties depending on the optical wavelength and layer thickness. Here, by using Maxwell’s equation for the electromagnetic fields penetrating thin films, we simulated in detail the absorption of the nanometer-thick thin film of several materials, such as Au, Ag, Cu, and Al, and figured out the optimal thickness range for the outer layers exposed to incoming field to optimize the energy harvesting. In particular, the absorption of the film supported by a totally reflective layer at the back of the structure could be significantly enhanced, and the maximal absorption happens at a layer much thinner than that in the case of the film solely irradiated by the field. These results could help suitably choosing of detailed thickness for the structure to optimize the field effect on a specific layer.

Depolarization of metal surfaces based on Mueller and integral equation method

This paper delves into the depolarization phenomenon of materials using the integral equation method and Mueller matrix method. In the integral equation method, it is observed that depolarization trends with roughness are similar at different wavelengths, but numerical differences exist. The results are well-supported by both theory and experiments. Specifically, at 1064 nm wavelength, materials exhibit smaller depolarization peaks, smoother trends, and right-shifted peaks compared to 633 nm. Additionally, the polarization characteristics of materials may change with varying incident polarization states. The Mueller matrix method investigates the depolarization trend with varying incident angles and different roughness levels. It reveals a gradual increase in depolarization with the incident angle until 60°, followed by a rapid rise, reaching a peak around 80°. Moreover, materials with higher absorption coefficients exhibit stronger depolarization effects. Overall, this research uncovers the impact of absorption and scattering on the polarization properties of materials, providing valuable insights for future studies in polarization recognition.

High-speed mid-infrared Mach–Zehnder electro-optical modulators in lithium niobate thin film on sapphire

Abstract In this study, high-speed mid-infrared Mach–Zehnder electro-optical modulators in x-cut lithium niobate (LN) thin film on sapphire were designed, simulated, and analyzed. The main optical parameters of three types of Mach–Zehnder modulators (MZMs) (residual LN with thickness of 0, 0.5, and 1 μm) were simulated and calculated, namely, the single-mode conditions, bending loss, separation distance between electrode edge and lithium niobate waveguide edge, optical field distribution, and half-wave voltage–length product. The main radio frequency (RF) parameters of these three types of MZMs, such as characteristic impedance, attenuation constant, RF effective index, and the –3 dB modulation bandwidth were calculated depending on the dimensions of the coplanar waveguide traveling-wave electrodes. The modulations with residual LN thickness of 0, 0.5, and 1 μm were calculated with bandwidths exceeding 140, 150, and 240 GHz, respectively, and the half-wave voltage–length product achieved was 22.4, 21.6, and 15.1 V cm, respectively. By optimizing RF and optical parameters, guidelines for device design are presented, and the achievable modulation bandwidth is significantly increased.

Reconfigurable Microwave Multi-Beamforming Based on Optical Switching and Distributing Network

Optical beamforming in microwave photonics is promising for supporting broadband wireless communications. However, the current optical beamforming lacks freedom because of the fixed connection between radio frequency (RF) signal and antenna elements (AEs). This manuscript tackles this challenge by proposing a dynamical optical beamforming architecture that reconfigures the antenna subarray for signal transmission depending on the number of signals to be transmitted. The proposed architecture employs an optical switching and distributing network (SDN) to realize a flexible connection between signals and AEs. An instance of the proposed architecture in photonic integrated circuits, which enables three working modes and transmits four RF signals through sixteen AEs, was presented and numerically simulated. The optical field distribution and beam pattern plots illustrated the operational principle and validated the feasibility of the proposed SDN architecture. Furthermore, the impact of the introduced architecture on the signal amplitude–phase consistency and the comparison of the proposed dynamic architecture and conventional fixe architectures are analyzed and discussed. The results indicate that the proposed architecture exhibits variable beamforming gain with lower hardware complexity.

Optimization of a plasmonic lens structure for maximum optical vortices induced on Weyl semimetal surface states.

Optical vortices have a topologically charged phase singularity and zero intensity distribution in the centre. Optical vortex creation is regarded as a significant means for information transmission for applications in quantum computing, encryption, optical communication, etc. In this study, using finite-difference time-domain (FDTD) simulation, we calculated the electric field intensity and phase distribution of 2D lattices of optical vortices generated from various polygonal plasmonic lens structures using surface states of a Weyl semimetal (MoTe2). It was shown that a hexagonal lens is the best performing plasmonic lens. Further, we posited here a unified mathematical formulation for optical electrical field and phase distribution in the near field for any polygonal plasmonic lens. Our theoretical calculation corroborated well with FDTD results, validating the proposed generalized formula. Such plasmonic lens structures demonstrating scaling behavior offer great potential for designing next-generation optical memories.

Study on the influence of local optical field amplification effect on laser-induced damage of fused silica materials

Fused silica is an important part of optical components in large laser systems. Due to the limitation of manufacturing process, impurities and defects in the optical element would greatly reduce the service life of the optical element, and significantly reduce the final output of the laser performance. Aiming at the modulation effect of the internal defect of the component on the internal optical field of the component, the theoretical, simulation and experimental research are carried out. The results show that in the double-bubble impurity coupling, under the same radius R, when the impurity spacing is 1 λ, the local optical field amplification has a maximum value. The effect is equivalent to single-bubble modulation with radius 2 R–3 R. There is an extreme point of the modulated optical field between the air and fused silica crossing line for bubble impurities of different radii. The optical field modulation of small radius impurities is distributed behind the bubble impurities, and the modulation effect of large radius impurities is the maximum when the spacing is 2 λ. The temperature distribution curve of the fused silica element modulated by bubble impurities is consistent with the optical field distribution curve, showing a trend of decreasing slope. The presence of bubble impurities will cause the surface combustion wave of the component to flash and accelerate, and the bubble impurities will increase the generation and expansion rate of the surface combustion wave. This study provides a basis for reducing the uneven distribution of laser energy during the interaction between laser and fused silica, improving the lifetime of the overall optical system, and experimental measurement and analysis.

High single-mode selectivity V-cavity tunable semiconductor laser based on GaAs

With the progress of integrated optoelectronic devices over recent decades, the semiconductor research has increasingly focused on tunable semiconductor lasers featuring a compact structure and simplified fabrication. In this manuscript, we present a proposal for a V-Cavity tunable semiconductor Laser (VCL) at a center wavelength of 940 nm. The theoretical analysis encompasses the threshold conditions of the laser, considering various cavity length differences within the waveguide layer structure. Moreover, we showcase a VCL with a waveguide width of 3 μm and a channel interval of 0.6 nm. Through the optimization of polynomial parameters associated with the curved waveguide, the VCL attains a transmittance exceeding 99.4 %. Additionally, we address the determination of optimal parameter ranges and solve the optical field distribution within the half-wave coupler. The simulation results exhibit that the half-wave coupler, employing optimized parameters, achieves remarkable single-mode selectivity when operating at a central wavelength of 940 nm. Notably, a maximum side mode suppression ratio (SMSR) of 47.9 dB is attainable with a half-wave coupler length of 45 μm and a waveguide gap of 1.7 μm.

Quantum Plasmonics in Sub-Atom-Thick Optical Slots.

We show using time-dependent density functional theory (TDDFT) that light can be confined into slot waveguide modes residing between individual atomic layers of coinage metals, such as gold. As the top atomic monolayer lifts a few Å off the underlying bulk Au (111), ab initio electronic structure calculations show that for gaps >1.5 Å, visible light squeezes inside the empty slot underneath, giving optical field distributions 2 Å thick, less than the atomic diameter. Paradoxically classical electromagnetic models are also able to reproduce the resulting dispersion for these subatomic slot modes, where light reaches in-plane wavevectors ∼2 nm-1 and slows to <10-2c. We explain the success of these classical dispersion models for gaps ≥1.5 Å due to a quantum-well state forming in the lifted monolayer in the vicinity of the Fermi level. This extreme trapping of light may explain transient "flare" emission from plasmonic cavities where Raman scattering of metal electrons is greatly enhanced when subatomic slot confinement occurs. Such atomic restructuring of Au under illumination is relevant to many fields, from photocatalysis and molecular electronics to plasmonics and quantum optics.

Classical calculation of differential cross section for a beam deflected by a concentric refractive index field.

Ray tracing is a fundamental geometric-optics issue which gives a single ray path but seldom presents the collective behavior of light. The optical field distribution usually involves the calculation of an electromagnetic field and is rarely discussed from the perspective of geometric optics. However, in this paper, we show for a concentric medium with spherically symmetric refractive index, how the relative angular distribution of refractive beams can be obtained from the pure classical geometric optics method. As a measurement of the distribution, we introduce the concept of the differential cross section (DCS), which can be calculated from the relation between aiming distance and deflecting the angle of the ray. We present a general method to solve this relation from both Snell's law in a constant medium and the optical Binet equation (OBE) in a gradient-index (GRIN) medium. Even without observing the collective traces, the DCS can independently give a quantitative description for the deflected light density of concentric media at different directions. It may act as a reference index for the design of beam deflector.

Unique Enhancement of the Whispering Gallery Mode in Hexagonal Microdisk Resonator Array with Embedded Ge Quantum Dots on Si.

The coupling between the quantum dots (QDs) and silicon-based microdisk resonator facilitates enhancing the light-matter interaction for the novel silicon-based light source. However, the typical circular microdisks embedded with Ge QDs still have several issues, such as wide spectral bandwidth, difficult mode selection, and low waveguide coupling efficiency. Here, by a promising structural modification based on the mature nanosphere lithography (NSL), we fabricate a large area hexagonal microdisk array embedded with Ge QDs in order to enhance the near-infrared light emissions by a desired whispering gallery modes (WGMs). By comparing circular microdisks with comparable sizes, we found the unique photoluminescence enhancement effect of hexagonal microdisks for certain modes. We have confirmed the WGMs which are supported by the microdisks and the well-correlated polarized modes for each resonant peak observed in experiments through the Finite Difference Time Domain (FDTD) simulation. Furthermore, the unique enhancement of the TE5,1 mode in the hexagonal microdisk is comparatively analyzed through the simulation of optical field distribution in the cavity. The larger enhanced region of the optical field contains more effectively coupled QDs, which significantly enhances the PL intensity of Ge QDs. Our findings offer a promising strategy toward a distinctive optical cavity that enables promising mode manipulation and enhancement effects for large-scale, cost-effective photonic devices.

Integrated barium titanate electro-optic modulators operating at CMOS-compatible voltage.

We propose monolithically integrated electro-optical modulators based on thin-film x-cut barium titanate that exhibit large modulation bandwidth and operate at voltages compatible with complementary metal-oxide-semiconductor technology. The optical and radio frequency parameters of the modulator are systematically simulated, calculated, and optimized, respectively. Our simulation includes the evaluation of single-mode conditions, the separation distance between the electrode edge and the waveguide edge, bending loss, optical field distribution, and half-wave voltage-length product for optical parameters, and characteristic impedance, attenuation constant, radio frequency effective index, and -3d B modulation bandwidth for radio frequency parameters. By engineering both the microwave and photonic circuits, we have achieved high electro-optical efficiencies and group-velocity matching simultaneously. Our numerical simulation and theoretical analysis show that the half-wave voltage-length product was 0.48V·cm, and the -3d B modulation bandwidths with a device length of 5mm and 10mm were 262GHz and 107GHz, respectively. Overall, our study highlights the potential of the proposed modulators for low driving voltage and high-performance optical communication systems.

Design of prism coupling structure for liquid crystal cladding waveguide beam steerer.

This paper proposes an extended prism coupling analysis method to accurately analyze the coupling structure of liquid crystal (LC) cladding waveguide beam steerer. We analyze the effects of LC anisotropy on the coupling of transverse electric (TE) and transverse magnetic (TM) modes and derive the expression of the optical field distribution that perfectly matches the given coupling structure. Based on this method, we present the optimal coupling structure for Gaussian beam. Taking into account the practical manufacturing process, we propose a simplified coupling structure and perform a detailed analysis of its performance based on numerical simulations. Experimental results show a coupling efficiency of 91% and a coupling angle full width at half maximum (FWHM) of about ±0.02°, demonstrating the effectiveness of the proposed method in predicting the coupling performance of anisotropic cladding waveguides.