Optical Fiber Research Articles

Metropolitan-scale heralded entanglement of solid-state qubits.

A key challenge toward future quantum internet technology is connecting quantum processors at metropolitan scale. Here, we report on heralded entanglement between two independently operated quantum network nodes separated by 10 kilometers. The two nodes hosting diamond spin qubits are linked with a midpoint station via 25 kilometers of deployed optical fiber. We minimize the effects of fiber photon loss by quantum frequency conversion of the qubit-native photons to the telecom L-band and by embedding the link in an extensible phase-stabilized architecture enabling the use of the loss-resilient single-click entangling protocol. By capitalizing on the full heralding capabilities of the network link in combination with real-time feedback logic on the long-lived qubits, we demonstrate the delivery of a predefined entangled state on the nodes irrespective of the heralding detection pattern. Addressing key scaling challenges and being compatible with different qubit systems, our architecture establishes a generic platform for exploring metropolitan-scale quantum networks.

Reconstruction of Nearshore Surface Gravity Wave Heights From Distributed Acoustic Sensing Data

AbstractDistributed Acoustic Sensing (DAS) is a photonics technology converting seafloor telecommunications and optical fiber cables into dense arrays of strain sensors, allowing to monitor various oceanic physical processes. Yet, several applications are hindered by the limited knowledge of the transfer function between geophysical variables and DAS measurements. This study investigates the quantitative relationship between surface gravity DAS‐recorded wave‐generated strain signals along the seafloor and the pressure at a colocated sensor. A remarkable linear correlation is found over various sea conditions allowing us to reliably determine significant wave heights from DAS data. Utilizing linear wave potential theory, we derive an analytical transfer function linking cable deformation and wave kinematic parameters. This transfer function provides a first quantification of the effects related to surface gravity waves and fiber responses. Our results validate DAS's potential for real‐time reconstruction of the surface gravity wave spectrum over extended coastal areas. It also enables the estimation of waves hydraulic parameters at depth without the need from offshore deployments.

AE-IRMamba: Low-Complexity Inverted Residual Mamba for Identification of Piezoelectric Ceramic and Optical Fiber Acoustic Emission Sensors Signals

AE-IRMamba: Low-Complexity Inverted Residual Mamba for Identification of Piezoelectric Ceramic and Optical Fiber Acoustic Emission Sensors Signals

AC Losses Properties of Optical Fiber Encapsulated High Temperature Superconducting Conductor on Round Core Cable

AC Losses Properties of Optical Fiber Encapsulated High Temperature Superconducting Conductor on Round Core Cable

HMS optical fiber gas sensor based on double-layer WO3@CQDs porous film modified cladding for detecting 2-butanone gas at room temperature

HMS optical fiber gas sensor based on double-layer WO3@CQDs porous film modified cladding for detecting 2-butanone gas at room temperature

Etched FBG-Based Optical Fiber Sensor for Hg²+ Ion Detection in Aqueous Solution

Etched FBG-Based Optical Fiber Sensor for Hg²+ Ion Detection in Aqueous Solution

Pd/PMMA Nanocomposite-Coated Optical Fiber Hydrogen Sensor Operating at Room Temperature With Humidity Tolerance

Pd/PMMA Nanocomposite-Coated Optical Fiber Hydrogen Sensor Operating at Room Temperature With Humidity Tolerance

Measurement of ocean currents by seafloor distributed optical-fiber acoustic sensing.

Ocean current measurements play a crucial role in aiding our understanding of ocean dynamics and circulation systems. Traditional methods, such as drifters and ocean buoys, are sparsely distributed and of limited effectiveness due to the nature of the marine environment and high operating expenses. Distributed acoustic sensing (DAS) is an emerging technology using submarine optical-fiber (OF) cables as dense seismo-acoustic arrays, offering a new perspective for ocean observations. Here, in situ observations of ocean surface gravity waves (OSGWs) and ocean currents by DAS were made along a pre-existing 33.6 km seafloor OF cable. The average current velocity and water depth along the cable were determined from observed OSGW-induced seafloor noise (0.05-0.2 Hz) using ambient-noise interferometry and frequency-domain beamforming. Variations in current velocity were derived at high spatiotemporal resolution using the frequency-domain waveform-stretching method. The inverted current velocity was verified by nearby ocean buoy observations and forecasting results. The observations demonstrate the effectiveness of DAS-instrumented OF cables in monitoring ocean currents.

Study on Coal Seam Roof Failure Based on Optical Fiber Acoustic Sensing and the Parallel Electrical Method

As China enters the stage of deep coal mining, the accidents caused by roof failure pose increasingly serious threats. Current research on roof failure zones often use single methods, but single geophysical data may result in multisolution issues during interpretation. This paper employed similar simulation experiments, exploring the strain failure characteristics and the changes in apparent resistivity caused by stress variations, taking the 11-3106 working face of a mining area as the research object. Through optical fiber strain and apparent resistivity, the locations and degrees of fracture in postmining rock strata were identified. The feasibility of using distributed optical fiber sensing and the parallel electrical method for qualitative and quantitative analysis of mining-induced fractures was verified. The results showed that optical fiber strain increased significantly at the location of rock fracture, with apparent resistivity anomalies rising correspondingly. The peak strain region corresponded well with the region of apparent resistivity anomalies. In a similar simulation with a geometric ratio of 1:100, the height of the caving zone was measured to be 31.65 cm, with a caving-to-mining ratio of 6.33. In the field working face, the caving zone height was 29.47 m, with a caving-to-mining ratio of 6.01, consistent with the actual conditions of the 11-3106 working face.

Lossy Mode Resonance Optical Fiber Enhanced by Electrochemical-Molecularly Imprinted Polymers for Glucose Detection.

Noninvasive glucose sensors are emergent intelligent sensors for analyzing glucose concentration in body fluids within invasion-free conditions. Conventional glucose sensors are often limited by a number of issues such as invasive and real-time detection, creating challenges in continuously characterizing biomarkers or subtle binding dynamics. In this study, we introduce an efficient lossy mode resonance (LMR) optical fiber sensor incorporating the molecularly imprinted polymers (MIPs) to amplify glucose molecules. A molecularly imprinted recognition platform is created on an LMR sensor surface through a convenient one-step electrochemical (EC) polymerization method, in which 3-Aminophenylboric acid and glucose serve as the functional monomer and template molecule, respectively. LMR resonance wavelength shift induced by the coupling of the optical lossy mode and the fiber core mode is employed as the parameter to characterize biomolecules. Due to its high sensitivity to surrounding environment changes, a limit of detection (LOD) of 4.62 × 10-2 μmol/L for glucose can be achieved by this optical fiber sensor. Additionally, the prepared EC-MIPs LMR sensor is capable of detecting glucose molecules in human saliva samples with high accuracy, endowing its potential for practical applications.

Integratable high-efficiency achromatic metalens across the entire low-loss bands of optical fiber from 1260 to 1625 nm

A challenge in optic fiber is to control dispersion over the entire low-loss bands covering the O + E + S + C + L bands with integratable ultracompact devices, which inevitably limits the range of fiber-based applications. Metalens supplies a dynamic platform for correcting chromatic aberration of optical devices in a flexible, integratable, and ultracompact way. Hence, we propose a broadband achromatic metalens integrated on the end face of a single-mode fiber covering the entire low-loss wavelength region. Utilizing the particle swarm optimization algorithm, we have substantially mitigated the phase-compensated matching error in the achromatic scheme. It demonstrates that the metalens is achievable with achromatic aberration and focuses over the entire low-loss wavelength band with a high mean focusing efficiency of 84.55%. Furthermore, this device exhibits a remarkable capability to break through the diffraction limit of the output field. This work provides a theoretical basis for fiber-integrated achromatic metalens over the entire low-loss bands, which has promising applications in imaging, sensing, and optical communication.

New Solutions to the Fractional Perturbed Chen Lee Liu Model with Time-Dependent Coefficients: Applications to Complex Phenomena in Optical Fibersns

In this paper, we consider the fractional perturbed Chen Lee Liu model with time-dependent coefficients (FPCLLM-TDCs). We apply the mapping method in order to get hyperbolic, elliptic, trigonometric and rational fractional solutions. These solutions are vital for understanding some fundamentally complicated phenomena. The obtained solutions will be very helpful for applications such as fiber optics and plasma physics. Finally, we show how the conformable fractional derivative order affect the exact solutions of the FPCLLM-TDCs. Furthermore, we examine the effects of time-dependent coefficients when these coefficients take on special cases such as random variables, polynomials, and hyperbolic functions.

Self-assembled sub-picoliter liquid periodic structures in a hollow optical fiber

In an experimental exploration, we successfully implemented a self-assembling methodology to construct a periodic liquid-air structure inside a hollow optical fiber (HOF). This fiber comprises a central air hole, a germanosilica ring core, and a silica cladding. A periodic structure of liquid droplets and air was obtained by the application of a microscopic heat source (MHS) traversing along the axial direction of the liquid-filled HOF. In the course of this study, we discerned three distinct zones within the structure. The first zone, referred to as Zone 1, demonstrated near-constant periodicity. The second zone, Zone 2, exhibited adaptable properties with regard to its periodicity, allowing it to be flexibly controlled. In the third zone, Zone 3, we noticed a chaotic response to external parameters, including temperature and the speed at which MHS was traversed. To regulate the liquid-air periodic structures, two different types of MHSs were utilized - a micro hydro-oxygen torch and a metal ring heater, each mounted on a translation stage. The study provides a detailed account of the parameters employed in utilizing these MHSs. Additionally, the optical properties of these liquid-air periodic structures were meticulously analyzed to explore the potential for developing new optofluidic applications.

Analysis of the Heat Transfer Performance of a Buried Pipe in the Heating Season Based on Field Testing

Ground source heat pump (GSHP) systems have been widely used in the field of shallow geothermal heating and cooling because of their high thermal efficiency and environmental friendliness. A borehole heat exchanger (BHE) is the key part of a ground source heat pump system, and its performance and investment cost have a direct and significant impact on the performance and cost of the whole system. The ground temperature gradient, air temperature, seepage flow rate, and injection flow rate affect the heat exchange performance of BHEs, but most of the research on BHEs lacks field test verification. Therefore, this study relied on the results of a field thermal response test (TRT) based on a distributed optical fiber temperature sensor (DOFTS) and site hydrological, geological, and geothermal data to establish a corrected numerical model of buried pipe heat transfer and carry out the heat transfer performance analysis of a buried pipe in the heating season. The results showed that the ground temperature gradient of the test site was about 3.0 °C/100 m, and the temperature of the constant-temperature layer was about 9.17 °C. Increasing the air temperature could improve the heat transfer performance. The temperature of the surrounding rock and soil mass of the single pipe spread uniformly, and the closer it was to the buried pipe, the lower the temperature. When there is groundwater seepage, the seepage carries the cold energy generated by a buried pipe’s heat transfer through heat convection to form a plume zone, which can effectively alleviate the phenomenon of cold accumulation. With an increase in seepage velocity, the heat transfer of the buried pipe increases nonlinearly. The heat transfer performance can be improved by appropriately reducing the temperature and velocity of the injected fluid. Selecting a backfill material with higher thermal conductivity than the ground body can improve the heat transfer performance. These research results can provide support for the optimization of the heat transfer performance of a buried tube heat exchanger.

Performance Analysis of Cyanoacrylate Bonded Optical Fiber Acoustic Couplers for Sensing Applications

Performance Analysis of Cyanoacrylate Bonded Optical Fiber Acoustic Couplers for Sensing Applications

Side Illumination Behavior and Mechanical Properties of Twisted End‐Emitting Polymer Optical Fiber Bundles

AbstractPolymer optical fibers (POFs), including side‐emitting POF (SEPOF) and end‐emitting POF (EEPOF) are developed for luminous textiles. The SEPOF is more common for usage but suffers from significant intensity decay, which limits its effective usage length. In contrast, the EEPOF can provide a much more stable side illumination behavior than SEPOF since the light is largely confined within the EEPOF, while its side illumination requires special treatment. In this work, 0.5 mm diameter EEPOFs were firstly assembled into bundles with 10 EEPOFs (B10) and 15 EEPOFs (B15), and then twisted. The morphology, tensile properties, and side illumination behavior of the twisted EEPOF bundles are evaluated. With an increased twisting degree, the initial modulus of twisted sample B10 increases (due to shortening of bundle diameter) from 1.06 to 1.17 GPa while the initial modulus of twisted sample B15 decreases from 1.01 to 0.91 GPa. The increased twisting degree also results in the higher flexibility (indirectly connected with modulus) of the twisted EEPOF bundles. Besides, the increased twisting degree results in a higher side illumination intensity meantime causes a decreased side illumination intensity along the light penetration path. When the twisting degree is low (e.g., 10 T m−1), the highest decrease rate of side illumination intensity along the light penetration path is found.

Study on Coal Pillar Setting and Stability in Downward Mining Section of Close Distance Coal Seam

To investigate the reasonable width of a coal pillar in the downward mining section of close-distance coal seams, the stress state of any point below the residual coal pillar in the overlying goaf and the width of a small coal pillar were studied by theoretical calculation, numerical simulation, similar simulation and field monitoring. The findings indicate that the width range of the small coal pillar is 7.92~11.42 m. The 4-1 coal seam is in the stress reduction zone when it is more than 16.6 m horizontally from the border of the residual coal pillar above it. In addition, the peak stress is situated inside the elastic zone of the coal pillar and is lower than the coal pillar’s bearing limit when a small coal pillar of 8 m is maintained. With the help of distributed optical fiber monitoring to model the coal pillars’ stress distribution, it is found that 8 m simulated coal pillars have a certain bearing capacity. The practical findings demonstrate that the 8 m small coal pillar that was left on the site satisfies the demand, and the convergence of the roadway’s floor and roof, and its two sides fall within the controllable range. The findings of the study offer a reference for the location of a return air roadway and the width of section coal pillars in the downward mining of close-distance coal seams.

Quasi-distributed acoustic sensing based on optical path difference demodulation for high-frequency and large-amplitude using an optical fiber interferometer array.

The phase-sensitive optical time domain reflectometry scheme has attracted great research interest in distributed acoustic sensing (DAS) but suffers from a trade-off between the dynamic range and signal frequency. In this paper, an optical path difference (OPD) demodulation method is applied to an interferometer array composed of an ultra-weak fiber Bragg grating (UWFBG) array and an imbalanced Michelson interferometer to solve this problem. As far as we know, this is the first time that OPD demodulation has been applied to DAS. The UWFBG array is interrogated by a frequency-modulated pulse, and the acoustic signal sensed by the fiber between any two adjacent UWFBGs can be retrieved by demodulating the variation of residual OPD of the interferometer formed by them. The proposed method is analyzed theoretically and validated experimentally; compared with the phase demodulation method, a 100-times boost in bandwidth is achieved for a signal with an amplitude of 0.4 µε. Results also show that the proposed method offers increasing signal-to-noise ratios as the frequency increases.

Damage characterization of FRP embedded with different optical fibers under tensile load using acoustic emission and micrographic real-time inspection

Embedding optical fibers into fiber-reinforced plastics (FRPs) for composite health monitoring has attracted the interests of academia and industry recently though the impact of embedded optical fiber on FRP damage has not been clarified. In this study, the damage to the FRP structure caused by the embedded optical fibers was investigated. Five FRP samples incorporated with different types of optical fibers were subjected to tensile testing, and the crack initiation and propagation were in situ monitored using acoustic emission (AE) and micrographic inspection. After the AE signals were classified in terms of peak amplitude and peak frequency using K-means++ clustering, the damage progression from matrix cracking, fiber/matrix debonding, delamination, and fiber break were characterized. In-situ micrographic inspection clearly revealed the damage evolution around the embedded optical fiber. By correlating the stress-strain curves with the AE clustering and micrographic inspection results, it was verified that larger-diameter optical fibers reduce the modulus and ultimate strength of the FRP, while a good optical fiber/matrix interface mitigates these negative effects. The embedded optical fiber accelerated the crack propagation around it, leading to changes in the damage pattern. This phenomenon is the primary cause of FRP failure. Notably, polyimide-coated optical fibers with an outside diameter of 50 μm are ideal for embedded sensing as their incorporation into the matrix reduces the ultimate strength of FRP by only 1.8% with minimal impact on crack propagation.

Nonlinear wave dynamics in ferromagnetic media: A study with the Kuralay-IIA equation

In this research, we delve into the exploration of the Kuralay-IIA equation by employing two power full approaches, namely extended hyperbolic function method (EHFM) and the improved modified Sardar-subequation method (IMSSEM). Applications of the Kuralay-IIA equation can be observed in a variety of physical phenomena, particularly in optical fibers, magnetic materials, and nonlinear optics. This equation performs an essential part in understanding gas behavior. Specifically, it offers an image of the relationship between volume, temperature and pressure in a gas system. We proceed through the matter in detail through the use of space curves which demonstrate integrable motion. Using the proposed techniques, our investigation provides an extensive variety of soliton solutions, such as periodic, dark–bright, bright, dark, solitary, and some other solutions. These solutions are in good alignment with previous study findings in this area. Analytical wave solutions are vital as they provide a basic comprehension of the physics or mathematics at play and establish a framework for further studies. The findings obtained from this study may help design models to come. The techniques used in this study are very effective, straightforward, and capable of handling more nonlinear models with high reliability. We use the Mathematica software to validate the accuracy and reliability of our results. Using carefully constructed 2D and 3D graphs generated, the resulting solutions are visually shown.