Optical Coupling Research Articles

Rapid Prototyping for Nanoparticle-Based Photonic Crystal Fiber Sensors.

The advent of nanotechnology has motivated a revolution in the development of miniaturized sensors. Such sensors can be used for radiation detection, temperature sensing, radio-frequency sensing, strain sensing, and more. At the nanoscale, integrating the materials of interest into sensing platforms can be a common issue. One promising platform is photonic crystal fibers, which can draw in optically sensitive nanoparticles or have its optical properties changed by specialized nanomaterials. However, testing these sensors at scale is limited by the the need for specialized equipment to integrate these photonic crystal fibers into optical fiber systems. Having a method to enable rapid prototyping of new nanoparticle-based sensors in photonic crystal fibers would open up the field to a wider range of laboratories that could not have initially studied these materials in such a way before. This manuscript discusses the improved processes for cleaving, drawing, and rapidly integrating nanoparticle-based photonic crystal fibers into optical system setups. The method proposed in this manuscript achieved the following innovations: cleaving at a quality needed for nanoparticle integration could be done more reliably (≈100% acceptable cleaving yield versus ≈50% conventionally), nanoparticles could be drawn at scale through photonic crystal fibers in a safe manner (a method to draw multiple photonic crystal fibers at scale versus one fiber at a time), and the new photonic crystal fiber mount was able to be finely adjusted when increasing the optical coupling before inserting it into an optical system (before, expensive fusion splicing was the only other method).

Precise mode control of laser-written waveguides for broadband, low-dispersion 3D integrated optics

Three-dimensional (3D) glass chips are promising waveguide platforms for building hybrid 3D photonic circuits due to their 3D topological capabilities, large transparent windows, and low coupling dispersion. At present, the key challenge in scaling down a benchtop optical system to a glass chip is the lack of precise methods for controlling the mode field and optical coupling of 3D waveguide circuits. Here, we propose an overlap-controlled multi-scan (OCMS) method based on laser-direct lithography that allows customizing the refractive index profile of 3D waveguides with high spatial precision in a variety of glasses. On the basis of this method, we achieve variable mode-field distribution, robust and broadband coupling, and thereby demonstrate dispersionless LP21-mode conversion of supercontinuum pulses with the largest deviation of <0.1 dB in coupling ratios on 210 nm broadband. This approach provides a route to achieve ultra-broadband and low-dispersion coupling in 3D photonic circuits, with overwhelming advantages over conventional planar waveguide-optic platforms for on-chip transmission and manipulation of ultrashort laser pulses and broadband supercontinuum.

Numerical simulation of deep ultraviolet LED, micro-LED, and nano-LED with different emission wavelengths based on FDTD.

The current low external quantum efficiency (EQE) of deep ultraviolet (DUV) LEDs and micro-LEDs is largely attributed to their low light extraction efficiency (LEE). To address this issue and increase the LEE of DUV devices, various strategies such as reducing size, modifying surface with nanostructures and roughening substrates have been proposed. While some studies have investigated the effects of nanopillar and size on DUV LED, there remains a lack of systematic research on the LEE enhancement mechanism across different wavelengths and sizes of DUV LEDs, micro-LEDs, and nano-LEDs. Therefore, in this study, we employed the numerical simulation method to explore the LEE, near-field intensity distribution, and far-field light intensity distribution from various angles for DUV LEDs, micro-LEDs, and nano-LEDs with wavelengths of 255 nm, 260 nm, and 275 nm, respectively. Our findings reveal a significant improvement in the LEE of DUV nano-LEDs and micro-LEDs, accompanied by reduced divergence angles. Moreover, we observe that longer wavelengths correspond to higher LEE values for devices with similar size. This enhancement in LEE is attributed to factors such as increased sidewall emission and reduced p-GaN absorption. Our investigation indicates that as the size of the DUV device decreases, the sidewall LEE for both transverse electric (TE) and transverse magnetic (TM) modes increases, with TM mode exhibiting a larger enhancement. This enhancement is mainly attributed to the reduction of total reflection within the DUV LEDs and micro-LEDs resulting from size reduction. Despite this, TE mode remains the main contributor to overall LEE. Additionally, our study reveals a reduction in p-GaN absorption of DUV light with decreasing device size, further contributing to the enhancement of LEE in DUV micro-LEDs and nano-LEDs. The increased LEE and reduced divergence angles of small-size DUV micro-LEDs and nano-LEDs not only promote lower power consumption but also enable easier optical system coupling. Consequently, these advancements have significant potential in optical wireless communication, charge management and high-precision lithography.

2 μm Low-noise Narrow-linewidth Single-frequency Fiber Laser Based on Self-injection Locking Technique

Abstract Based on the self-injection locking technique, we demonstrate a low-noise and narrow linewidth of 2 μm single-frequency distributed Bragg reflection fiber laser with an optical self-injection feedback loop (OSIFL). The OSIFL consists of a piece of delay fiber and two polarization-maintaining optical couplers, which can effectively narrow down the linewidth and suppress the relative intensity noise (RIN) of the laser. It was observed that the laser linewidth was narrowed down from the initial 6.5 kHz to 1.6 kHz while the laser relaxation oscillation peak was reduced from -100.3 dB/Hz to -113.5 dB/Hz. Experimental results demonstrate that by extending the photon lifetime we can effectively narrow down the linewidth and significantly reduce the RIN of the laser. This research is of great significance for promoting the development and application of 2 μm single-frequency lasers.

Power Enhancement and Spot Homogenization Design for Arrayed Semiconductor Lasers.

Improving the spot brightness and uniformity of arrangement of the array laser is conducive to ensuring the beam quality of the fiber laser. Based on the light tracing principle, the optical model performance of two common fiber lasers was first analyzed. Then, a novel rotationally polarized optical model with high power and spot uniformity was designed and optimized on the basis of the aforementioned analysis. The results of the evaluation metrics of the multi-indicator optical model show that the spot uniformity of our proposed model improved by 24.03%, the power improved by 0.55%, and the maximum light distance was shortened from 120 mm to 82.58 mm. Further, the results of the coupling tolerance analysis of the optical elements show that the total coupling efficiency was 89.04%. The coupling power and tolerance relationships did not produce degradation compared with the traditional model. Extensive comparative results show that the designed rotationally polarized optical path model can effectively improve the optical coupling efficiency and spot uniformity of arrayed semiconductor lasers.

Reaction mechanism investigation on Plasma-Assisted steam reforming of toluene based on emission spectrum analysis and kinetic simulation

Plasma-enhanced reforming has been widely studied as an efficient technology for online tar removal. By combining reforming experiments with kinetic modeling and in-situ optical emission spectrometry (OES) analysis, interaction mechanism and coupling rules of plasma/thermal reactions during plasma-assisted steam reforming of toluene were well explored in this study. A chemistry model was innovatively developed for plasma-assisted steam reforming of toluene, and predicted experimental results under different operations conditions with superb agreements. The rate of production and sensitivity analysis implied that OH, H and N2* mainly contributed to primary toluene conversion, while the electronic attachment dissociation of H2O, H addition onto benzene ring and benzyl oxidation by OH were the most enhancing-sensitive reactions. Resultantly, toluene conversion was greatly increased with steam addition before VfH2O = 10 %, but after which VfH2O increase deteriorated the reforming performance due to the inhibition of E-N2 collision by high VfH2O. As temperature increased, plasma and thermal synergistically promoted reforming performance before 300 °C, at which > 60 % toluene was converted into small molecules such as CO, H2 and C2H2, with yields of 23.6 %, 9.4 % and 16.3 % correspondingly at 12 kJ/L, but further temperature increase would not benefit due to the reduced discharge field strength at higher temperatures, being confirmed by the decreased relative intensity of OH, CN feature bands on OES. It was initially proposed that non-thermal plasma governed the reforming process at T < 300 °C, and thermal reactions predominated at T > 500 °C after a transition region (300 ∼ 500 °C). Increase of input energy caused higher discharge field strength, promoted the electronic collision ionization or dissociation of N2 and H2O, thus enhanced toluene conversion and gas yields. A detailed reaction pathway has also been clarified.

Interface states and optical coupling functionalities in the super-SSH lattices

We theoretically address the coupling between trimer lattices and reveal the existence of stable multiple edge and interface states. It is shown the superlattice can provides a tunable number of topologically protected edge and interface states depending on the coupling strength and topological phase of the connecting lattices. Dynamics and transport properties of interface states are also investigated, Due to the interference of linear modes with different propagation constants, stable oscillations resulted from the coupling of interface states in finite trimerized waveguide arrays are observed and can give rise to optical coupling functionalities, including directional coupling, beam splitting and beam oscillator.

Rotating twisted templates for imprinting polarization gratings with a sub- to dozen-micron period.

In this Letter, we report and experimentally demonstrate what is to our knowledge a novel scheme for imprinting polarization gratings (PGs) with a pair of templates. Compared with the traditional method that a single template can only imprint PG with a single period, cascading two templates can control the period of imprinted PG at will. However, the low diffraction efficiency is inevitably caused by cascading two templates. Therefore, a rigorous coupled wave analysis (RCWA) is adopted to design a multi-twisted template to address this challenge. As a proof of concept, two multi-twisted templates with a period of 1.6 μm were fabricated, and PGs with a large period range from 0.4 to 48.6 μm were successfully imprinted. The proposed scheme is expected to enable rapid, robust, and high-quality mass production of beam steering, large-angle deflectors, and diffractive optical couplers.

An excellent super-polarization-independent optical directional coupler based on dual-core photonic crystal fibre with a bandwidth of 390 nm

In this work, a novel structure of dual-core photonic crystal fibre (PCF) is proposed to realize the super-polarization-independent optical directional coupler, based on the feasibility of optical fibre manufacturing process and the need of practical application into account. The introduced fluorine-doped elliptical cores with a rotation angle of 45 degrees successfully realize the super-polarization-independent coupling performance within the effective wavelength range of 1230–1620 nm, with a difference in coupling ratios between two polarized lights of less than 0.004%. In other words, it counteracts the negative effects of the introduction of dual cores on the structure’s symmetry. This greatly reduces the difference in coupling ratio between the two polarization states and effectively eliminates the polarization-dependence of the dual-core PCF. In addition, when compared to traditional elliptical air holes, the solid elliptical structure offers greater ease of control, making manufacturing less challenging. Consequently, this innovative structure is poised for widespread adoption in today’s optical communication networks.

Handheld Microplasma Optical Emission Spectrometer Coupling With Self-Heating Solid-Phase Microextraction For On-Site Detection Of Urinary Lead

Handheld Microplasma Optical Emission Spectrometer Coupling With Self-Heating Solid-Phase Microextraction For On-Site Detection Of Urinary Lead

Nearly polarization-insensitive angular filters enabled by metal-dielectric photonic crystal in the visible region

We report on the design and fabrication of nearly polarization-insensitive angular filters, which have been developed through the optimization of one-dimensional Ag/MgF2 photonic crystals (PCs). We evaluate different initial systems for optimization and compare their results in terms of both the wavelength and angular selectivity. Our findings reveal that relaxing the strict periodic condition of initial photonic crystals with a small number of lattices has enabled improvement in the angular selectivity via Fabry–Perot resonances in dielectric layers, achieving a transmission as high as 81% at normal incidence by optimizing the dielectric layer thickness. The simulation results demonstrate that the transmitted beam through the angular filtering sample at 633 nm has allowable angles within 29° and 33° for TE and TM polarization, respectively, with a transmission over 80% at normal incidence. This proposed and demonstrated angular filter represents what we believe is a novel way to utilize 1D metal-dielectric PCs as polarization-insensitive angular filters, overcoming the main drawback of a low transmission. This angular filter will have significant applications in lighting, beam manipulation, optical coupling, and optical detectors.

Coherent optical coupling to surface acoustic wave devices

Surface acoustic waves (SAW) and associated devices are ideal for sensing, metrology, and hybrid quantum devices. While the advances demonstrated to date are largely based on electromechanical coupling, a robust and customizable coherent optical coupling would unlock mature and powerful cavity optomechanical control techniques and an efficient optical pathway for long-distance quantum links. Here we demonstrate direct and robust coherent optical coupling to Gaussian surface acoustic wave cavities with small mode volumes and high quality factors (>105 measured here) through a Brillouin-like optomechanical interaction. High-frequency SAW cavities designed with curved metallic acoustic reflectors deposited on crystalline substrates are efficiently optically accessed along piezo-active directions, as well as non-piezo-active (electromechanically inaccessible) directions. The precise optical technique uniquely enables controlled analysis of dissipation mechanisms as well as detailed transverse spatial mode spectroscopy. These advantages combined with simple fabrication, large power handling, and strong coupling to quantum systems make SAW optomechanical platforms particularly attractive for sensing, material science, and hybrid quantum systems.

Exploring solitons in optical twin-core couplers with Kerr law of nonlinear refractive index using the modified extended direct algebraic method

Exploring solitons in optical twin-core couplers with Kerr law of nonlinear refractive index using the modified extended direct algebraic method

Programmable Colloids with Analogous Hypercoordination Complex Architectures.

Colloidal molecule clusters (CMCs) are promising building blocks with molecule-like symmetry, offering exceptional synergistic properties for applications in plasmonics and catalysis. Traditional CMC fabrication has been limited to simple molecule-like structures utilizing isotropic particles. Here, we employ molecular dynamics simulation to investigate the co-assembly of anisotropic nanorods (NRs) and the stimulus-responsive polymer (SRP) via reversible adsorption. The results of the simulation show that it is possible to fabricate hypercoordination complex structures with high symmetry from the co-assembly of NRs and the SRP, even in analogy to the Th(BH4)4 structure. The coordination number of these CMCs can be precisely programmed by adjusting the shape and size of the ends of the NRs and the SRP cohesion energy. Furthermore, a finite-difference time-domain simulation indicates these hypercoordination structures exhibit significantly enhanced optical activity and plasmonic coupling effects. These findings introduce a new design approach for complex molecule-like structures utilizing anisotropic nanoparticles and may expand the applications of CMCs in photonics.

Optical control and coherent coupling of spin diffusive modes in thermal gases

Quantum science and technology devices exploiting collective spins in thermal gases are extremely appealing due to their simplicity and robustness. This comes at the cost of dealing with the random thermal motion of the atoms which is usually an uncontrolled source of decoherence and noise. There are however conditions, for example, when diffusing in a buffer gas, where thermal atoms can occupy a discrete set of stable spatial modes. Diffusive modes can be extended or localized, have different magnetic properties depending on boundary conditions, and can react differently to external perturbations. Here, we selectively excite, manipulate, and interrogate the longest-lived of these modes by using laser light. In particular, we identify the conditions for the generation of modes that are exceptionally resilient to detrimental effects such as light induced frequency shifts and power-broadening, which are often the dominant sources of systematic errors in atomic magnetometers and comagnetometers. Moreover, we show that the presence of spatial inhomogeneities in the pump introduces a coupling that leads to a coherent exchange of excitation between the two longest-lived modes. Our results demonstrate that systematic engineering of the multi-mode nature of diffusive gases has great potential for improving the performance of quantum sensors based on alkali-metal thermal vapors, and opens new perspectives for quantum information applications. Published by the American Physical Society 2024

Multidimensional Fiber‐to‐Chip Optical Processing Using Photonic Integrated Circuits

AbstractMultidimensional multiplexing technologies have been proven to be a promising scheme to meet the demands of high‐capacity optical interconnects and optical processing networks. However, challenges remain to realize multidimensional hybrid multiplexing data transmission and signal processing between few‐mode fiber transmission links and on‐chip optical processing networks, since the optical coupling between fiber and chip is almost exclusively in the single‐mode regime. Here, a multidimensional fiber‐to‐chip optical processing system is proposed and demonstrated for hybrid wavelength‐, mode‐, and polarization‐division multiplexing signals, where multidimensional coupling between few‐mode fiber transmission link and on‐chip multi‐mode processing network is realized by using a 3D photonic integrated (de)multiplexers on a glass chip as well as 2D photonic integrated (de)multiplexers on a silicon chip, and the on‐chip multidimensional optical processing network composed by parallel cascaded micro‐ring resonator array performs a function of reconfigurable optical add/drop multiplexer. By operating wavelength‐division multiplexing in conjunction with mode‐division multiplexing and polarization‐division multiplexing, the communication bandwidth of fiber‐to‐chip optical processing systems can be further scaled.

Advances in dispersion turning point enhanced ultrasensitive optical fiber refractive index sensors

Optical fiber sensor operating at the dispersion turning point (DTP) has become a promising building block for future development in biosensing application due to its ultrahigh sensitivity. In this paper, we comprehensively review the fundamentals of various optical fiber sensors under the turning point condition, together with the basic definition, classification, design, fabrication and applications. Three main methods for DTP implementation are introduced and highlighted: i) phase matching condition in long period grating, ii) refractive index (RI) matching to the effective refractive index of the waveguide in modal interferometer, and iii) mode coupling via diameter regulation in modal interferometer, optical microfiber coupler and polarization interferometer. The aim here is to provide reliable and effective methods to achieve the superior performance on turning point-enhanced optical fiber RI sensors, accelerating the development of transduction technology for the research of novel biomedical sensors.

Design and Analysis of a Narrow Linewidth Laser Based on a Triple Euler Gradient Resonant Ring

We designed a narrow-linewidth external-cavity hybrid laser leveraging a silicon-on-insulator triple Euler gradient resonant ring. The laser’s outer cavity incorporates a compact, high-Q resonant ring with low loss. The straight waveguide part of the resonant ring adopts a width of 1.6 μm to ensure low loss transmission. The curved section is designed as an Euler gradient curved waveguide, which is beneficial for low loss and stable single-mode transmission. The design features an effective bending radius of only 26.35 μm, which significantly improves the compactness of the resonant ring and, in turn, reduces the overall footprint of the outer cavity chip. To bolster the laser power and cater to the varying shapes of semiconductor optical amplifier (SOA) spots, we designed a multi-tip edge coupler. Theoretical analysis indicates that this edge coupler can achieve an optical coupling efficiency of 85%. It also reveals that the edge coupler provides 3 dB vertical and horizontal alignment tolerances of 0.76 μm and 2.4 μm, respectively, for a spot with a beam waist radius of 1.98 μm × 0.99 μm. The outer cavity, designed with an Euler gradient micro-ring, can achieve a side-mode suppression ratio (SMSR) of 30 dB within a tuning range of 100 nm, with a round-trip loss of the entire cavity at 1.12 dB, and an expected theoretical laser linewidth of 300 Hz.

Linear Fiber Laser Configurations for Optical Concentration Sensing in Liquid Solutions

In this study, different configurations based on linear fiber lasers were proposed and experimentally demonstrated to measure the concentration of liquid solutions. Samples of paracetamol liquid solutions with different concentrations, in the range from 52.61 to 201.33 g/kg, were used as a case-study. The optical gain was provided by a commercial bidirectional Erbium-Doped Fiber Amplifier (EDFA) and the linear cavity was obtained using two commercial Fiber Bragg Gratings (FBGs). The main difference of each configuration was the coupling ratio of the optical coupler used to extract the system signal. The sensing head corresponded to a Single-Mode Fiber (SMF) tip that worked as an intensity sensor. The results reveal that, despite the optical coupler used (50:50, 60:40, 70:30 or 80:20), all the configurations reached the laser condition, however, the concentration sensing was only possible using a laser drive current near to the threshold value. The configurations using a 70:30 and an 80:20 optical coupler allowed paracetamol concentration measurements with a higher sensitivity of (−3.00 ± 0.24) pW/(g/kg) to be performed. In terms of resolution, the highest value obtained was 1.75 g/kg, when it was extracted at 20% of the output power to the linear cavity fiber laser configuration.

Broadband silicon nitride integrated polarization rotators at 780 nm

Polarization management, and in particular polarization rotation, is becoming increasingly important for photonic integrated circuits (PICs). While fiber-optic networks are generally polarization insensitive, the large aspect ratio of high-index-contrast PIC waveguides leads to a large polarization-dependent response of integrated components such as waveguides, optical cavities, couplers, etc. Although foundry-processed polarization rotators operating at telecom and datacom wavelengths (C- and O-band) have been demonstrated, to date, there have been few reports of devices operating at shorter wavelengths. This work demonstrates silicon nitride (SiN) polarization rotators operating from λ=700-1000 nm (the I/Z-band) that take advantage of optical coupling between two waveguiding layers in a standard foundry process. We demonstrate a broadband white-light polarization measurement setup that enables precise characterization of the polarization-dependent transmission of photonic waveguide devices. Measurements on foundry-processed devices confirm full TE-to-TM rotation exhibiting a maximum polarization extinction ratio (PER) approaching 20 dB (limited by our measurement setup), and an exceptionally large bandwidth of up to 160 nm with an insertion loss less than 0.2 dB. Beam propagation method (3D-BPM) simulations show good agreement with experimental data and enable the device parameters to be adjusted to accommodate different operating wavelengths and geometries with no changes to the existing foundry process. This work opens up opportunities for applications in quantum information and bio-sensing where operation at λ&lt;1000nm is needed.