Optical Coherence Tomography Device Research Articles

Advances in Photoreceptor and Retinal pigment epithelium Quantifications in intermediate AMD: High-Res versus Standard SPECTRALIS OCT

Purpose: In this study we investigated differences in retinal feature visualization of high-resolution optical coherence tomography (OCT) devices with different axial resolutions in quantifications of retinal pigment epithelium (RPE) and photoreceptors (PR) in intermediate age-related macular degeneration (iAMD). Methods: Patients were imaged with standard SPECTRALIS HRA+OCT and the investigational High-Res OCT device (both by Heidelberg Engineering, Heidelberg, Germany). Drusen, RPE and PR layers were segmented using validated AI-based algorithms followed by manual corrections. Thickness- and drusen maps were computed for all patients. Loss and thickness measurements were compared between devices, drusen vs. non-drusen areas and EDTRS subfields using mixed-effects models. Results: Thirty-three eyes from 28 iAMD patients were included. Normalized PR integrity loss was significantly higher with 4.6% for standard OCT compared to 2.5% on High-Res OCT. The central and parafoveal PR integrity loss was larger than perifoveal loss (p<0.05). PR thickness was increased on High-Res OCT and in non-drusen regions (p<0.001). RPE appeared thicker on standard OCT and above drusen (p<0.01). Conclusion: Our study shows that High-Res OCT is able to identify the condition of investigated layers in iAMD with higher precision. This improved in vivo imaging technology might promote our understanding of the pathophysiology and progression of AMD.

Anatomical Features can Affect OCT Measures Used for Clinical Decisions and Clinical Trial Endpoints.

To understand the association between anatomical parameters of healthy eyes and optical coherence tomography (OCT) circumpapillary retinal nerve fiber layer (cpRNFL) thickness measurements. OCT cpRNFL thickness was obtained from 396 healthy eyes in a commercial reference database (RDB). The temporal quadrant (TQ), superior quadrant (SQ), inferior quadrant (IQ), and global (G) cpRNFL thicknesses were analyzed. The commercial OCT devices code these values based on percentiles (red, <1%; yellow, ≥1% and <5%), after taking age and disc area into consideration. Four anatomical parameters were assessed: fovea-to-disc distance, an estimate of axial length, and the locations of the superior and the inferior peaks of the cpRNFL thickness curve. Pearson correlation values were obtained for the parameters and the thickness measures of each of the four cpRNFL regions, and t-tests were performed between the cpRNFL thicknesses coded as abnormal (red or yellow, <5%) versus normal (≥5%). For each of the four anatomical parameters, the correlation with the thickness of one or more of the TQ, SQ, IQ, and G regions exceeded the correlation with age or disc area. All four parameters were significantly (P < 0.001) associated with the abnormal cpRNFL values. The significant parameters were not the same for the different regions; for example, a parameter could be negatively correlated for the TQ but positively correlated with the SQ or IQ. In addition to age and disc area, which are used for inferences in normative databases, four anatomical parameters are associated with cpRNFL thickness. Taking these additional anatomical parameters into consideration should aid diagnostic accuracy.

COMPARISON OF THE CHOROIDAL VASCULARITY INDEX MEASUREMENTS OF IMAGES ACQUIRED WITH DIFFERENT OPTICAL COHERENCE TOMOGRAPHY SCAN SCALE TYPES.

To evaluate the differences in choroidal vascularity index (CVI) measurements between images acquired at the 1:1 pixel scale and at the 1:1 µ m scale of the Heidelberg optical coherence tomography device. Forty-five healthy eyes of 45 healthy subjects were included for this study. Fovea-centered scans were obtained with an enhanced-depth imaging mode with a high-speed protocol scan. Each scan was exported in 3 different types: 1) 1:1 pixel scale type; 2) 1:1 µ m scale type (MST); and 3) 4×-magnified MST (4×MST; 400%-magnified 1:1 µ m images exported via screenshot). A comparison between CVI measurements based on the different scale types of optical coherence tomography images was conducted using the Bland-Altman analysis and intraclass correlation coefficient. The image with the worst clarity was acquired via the MST, and the CVI was found to be higher in MST images (69.05 ± 3.21) compared with the other groups. The intraclass correlation coefficient between the CVI values of the 4×MST and pixel scale type images was 0.92, between those of the 4×MST and MST images was 0.33, and between those of the pixel scale type and MST images was 0.44. The optical coherence tomography scale and export method type significantly influence the image resolution, CVI, and choroidal area measurements.

En Face and Volumetric Comparison of Hypertransmission Defects Evaluated by Cirrus and Spectralis Optical Coherence Tomography

PurposeTo evaluate and compare en face and 3-dimensional (D) properties of hypertransmission defects (HTDs) between different optical coherence tomography (OCT) devices using OCT volumes and reconstructed en face images. SettingsComparative diagnostic evaluation study. MethodsThirty eyes with dry age-related macular degeneration (AMD) that underwent dense OCT macular volume scans with both the Spectralis (97 B-scans/volume; 2,910 B-scans in total) and Cirrus OCT (128 B-scans/volume; 3,840 B-scans in total) from AMISH EYE STUDY cohort were included in this analysis. HTD regions were labeled on each B-scan and reconstructed into en face and 3-D volume images. Properties of HTD volume were compared between the two devices. ResultsQualitative score of en face images for HTD was higher for the Cirrus compared to the Spectralis (P < 0.01). The quality of Spectralis en face images improved after preprocessing and reconstruction. The 2-D HTD area on en face obtained from 2-D projections of 3-D volume did not differ between devices (P = 0.478; ICC 0.998; Jaccard index 0.721 ± 0.086). There was no difference in the number, volume, PALs, and surface areas of HTDs between devices in the volumetric analysis (all P ≥ 0.090). The signal intensity of HTD normalized by the mean choroidal signal intensity did not differ between devices (P = 0.861). ConclusionsThe visualization of HTD on en face images from Spectralis OCT could be enhanced through image processing. The equivalence in 3-D HTD parameters between the two devices suggests interchangeability for assessing these lesions in AMD.

Visualizing features with wide-field volumetric OCT angiography.

Optical coherence tomography (OCT) and its extension OCT angiography (OCTA) have become essential clinical imaging modalities due to their ability to provide depth-resolved angiographic and tissue structural information non-invasively and at high resolution. Within a field of view, the anatomic detail available is sufficient to identify several structural and vascular pathologies that are clinically relevant for multiple prevalent blinding diseases, including age-related macular degeneration (AMD), diabetic retinopathy (DR), and vein occlusions. The main limitation in contemporary OCT devices is that this field of view is limited due to a fundamental trade-off between system resolution/sensitivity, sampling density, and imaging window dimensions. Here, we describe a swept-source OCT device that can capture up to a 12 × 23-mm field of view in a single shot and show that it can identify conventional pathologic features such as non-perfusion areas outside of conventional fields of view. We also show that our approach maintains sensitivity sufficient to visualize novel features, including choriocapillaris morphology beneath the macula and macrophage-like cells at the inner limiting membrane, both of which may have implications for disease.

OCT Imaging in Murine Models of Alzheimer's Disease in a Systematic Review: Findings, Methodology and Future Perspectives.

The murine models of Alzheimer's disease (AD) have advanced our understanding of the pathophysiology. In vivo studies of the retina using optical coherence tomography (OCT) have complemented histological methods; however, the lack of standardisation in OCT methodologies for murine models of AD has led to significant variations in the results of different studies. A literature search in PubMed and Scopus has been performed to review the different methods used in these models using OCT and to analyse the methodological characteristics of each study. In addition, some recommendations are offered to overcome the challenges of using OCT in murine models. The results reveal a lack of consensus on OCT device use, retinal area analysed, segmentation techniques, and analysis software. Although some studies use the same OCT device, variations in other parameters make the direct comparison of results difficult. Standardisation of retinal analysis criteria in murine models of AD using OCT is crucial to ensure consistent and comparable results. This implies the application of uniform measurement and segmentation protocols. Despite the absence of standardisation, OCT has proven valuable in advancing our understanding of the pathophysiology of AD.

Automatic data-driven design and 3D printing of custom ocular prostheses.

Millions of people require custom ocular prostheses due to eye loss or congenital defects. The current fully manual manufacturing processes used by highly skilled ocularists are time-consuming with varying quality. Additive manufacturing technology has the potential to simplify the manufacture of ocular prosthetics, but existing approaches just replace to various degrees craftsmanship by manual digital design and still require substantial expertise and time. Here we present an automatic digital end-to-end process for producing custom ocular prostheses that uses image data from an anterior segment optical coherence tomography device and considers both shape and appearance. Our approach uses a statistical shape model to predict, based on incomplete surface information of the eye socket, a best fitting prosthesis shape. We use a colour characterized image of the healthy fellow eye to determine and procedurally generate the prosthesis's appearance that matches the fellow eye. The prosthesis is manufactured using a multi-material full-colour 3D printer and postprocessed to satisfy regulatory compliance. We demonstrate the effectiveness of our approach by presenting results for 10 clinic patients who received a 3D printed prosthesis. Compared to a current manual process, our approach requires five times less labour of the ocularist and produces reproducible output.

Genome-wide association study and polygenic risk scores of retinal thickness across the cognitive continuum: data from the NORFACE cohort

BackgroundSeveral studies have reported a relationship between retinal thickness and dementia. Therefore, optical coherence tomography (OCT) has been proposed as an early diagnosis method for Alzheimer’s disease (AD). In this study, we performed a genome-wide association study (GWAS) aimed at identifying genes associated with retinal nerve fiber layer (RNFL) and ganglion cell inner plexiform layer (GCIPL) thickness assessed by OCT and exploring the relationships between the spectrum of cognitive decline (including AD and non-AD cases) and retinal thickness.MethodsRNFL and GCIPL thickness at the macula were determined using two different OCT devices (Triton and Maestro). These determinations were tested for association with common single nucleotide polymorphism (SNPs) using adjusted linear regression models and combined using meta-analysis methods. Polygenic risk scores (PRSs) for retinal thickness and AD were generated.ResultsSeveral genetic loci affecting retinal thickness were identified across the genome in accordance with previous reports. The genetic overlap between retinal thickness and dementia, however, was weak and limited to the GCIPL layer; only those observable with all-type dementia cases were considered.ConclusionsOur study does not support the existence of a genetic link between dementia and retinal thickness.

Comparison of retinal thickness measurements among four different optical coherence tomography devices

We sought to compare the retinal thickness measurements collected using different optical coherence tomography (OCT) devices. This prospective study included 21 healthy cases, and the retinal thickness was measured using the PLEX Elite (Carl Zeiss Meditec, Dublin, California, USA), DRI OCT-1 Atlantis (Topcon Corp, Tokyo, Japan), Cirrus 5000 HD-OCT (Carl Zeiss Meditec), and Spectralis OCT (Heidelberg Engineering, Heidelberg, Germany), respectively. The mean central retinal thickness (CRT) and mean retinal thickness of the Early Treatment of Diabetic Retinopathy Study (ETDRS) area were compared. The CRT varied significantly among the different OCT devices (P < 0.001). Post-hoc analysis revealed that the CRT measured using PLEX Elite (278.95 ± 20.04 µm) and Spectralis (271.86 ± 17.92 µm) were similar, and both were greater than the CRT measurements of DRI OCT-1 (239.57 ± 21.06 µm) and Cirrus (256.76 ± 17.82 µm). Additionally, the mean retinal thickness in each ETDRS area showed significant differences among the four devices (all P < 0.001). The mean retinal thickness measured varied according to the device used, and this needs to be considered when comparing retinal thickness measurements taken with different devices.

Accuracy comparison of tomography devices for ray tracing-based intraocular lens calculation.

To evaluate the interchangeability of different tomography devices used for ray tracing-based intraocular lens (IOL) calculation. Eye clinic, Castrop-Rauxel, Germany. Retrospective analysis. Measurements from 3 Placido-Scheimpflug devices and 3 optical coherence tomography (OCT) devices were compared in 83 and 161 other eyes after cataract surgery, respectively. 2-dimensional matrices of anterior local corneal curvature and local corneal thickness are transferred to the ray-tracing software OKULIX. Calculations are performed with the same IOL in the same position of an eye with the same axial length. Differences in spherical equivalent (SE), astigmatism, and spherical aberration are evaluated. Furthermore, the influence of the size of the matrices (optical zone) on the accuracy is quantified. For the Placido-Scheimpflug devices, the deviations from the average of three measurements taken for each eye in SE (mean ± SD) were 0.17 ± 0.24 diopters (D), -0.26 ± 0.29 D, and 0.08 ± 0.39 D ( P < .001, analysis of variance [ANOVA]), for the centroids of the astigmatic differences 0.04 D/173 degrees, 0.14 D/93 degrees, and 0.10 D/7 degrees, and for the median of the absolute values of the vector differences 0.31 D, 0.33 D, and 0.29 D. For OCT devices, the corresponding results were 0.01 ± 0.21 D, -0.03 ± 0.21 D, and 0.02 ± 0.20 D ( P = .005, ANOVA); 0.18 D/120 degrees, 0.07 D/70 degrees, and 0.22 D/4 degrees; and 0.26 D, 0.30 D, and 0.33 D. The accuracy of the calculated spherical aberrations allows for an individual selection of the best fitting IOL model in most cases. The differences are small enough to make the devices interchangeable regarding astigmatism and spherical aberration. Although there are significant differences in SE between Scheimpflug and OCT devices, the differences between OCT devices are also small enough to make them interchangeable, but the differences between Placido-Scheimpflug devices are too large to make these devices interchangeable.

Rigid alignment method for secondary analyses of optical coherence tomography volumes.

Optical coherence tomography (OCT) provides micron level resolution of retinal tissue and is widely used in ophthalmology. Millions of pre-existing OCT images are available from research and clinical databases. Analysis of this data often requires or can benefit significantly from image registration and reduction of speckle noise. One method of reducing noise is to align and average multiple OCT scans together. We propose to use surface feature information and whole volume information to create a novel and simple pipeline that can rigidly align, and average multiple previously acquired 3D OCT volumes from a commercially available OCT device. This pipeline significantly improves both image quality and visualization of clinically relevant image features over single, unaligned volumes from the commercial scanner.

Material Analysis of Explanted Calcified Silicone Intraocular Lenses in Association with Asteroid Hyalosis.

The aim of this study was to analyze posterior surface opacification in explanted silicone intraocular lenses (IOLs) with clinicopathologic correlation to asteroid hyalosis. In a laboratory setup, 12 explanted silicone IOLs underwent laboratory analyses, including light microscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy for elemental composition (EDX). Relevant clinical data were obtained for each case, including gender, age at IOL implantation, dates of implantation and explantation, as well as history of neodymium-dopped yttrium aluminum garnet (Nd:YAG) laser treatments or other opacification removal attempts. High-resolution optical coherence tomography (OCT) images were obtained in vitro with an anterior segment OCT device (Anterion, Heidelberg Engineering, Heidelberg, Germany). Calcification located at the posterior optic surface of each lens was identified through SEM and EDX analyses, revealing deposits composed of hydroxyapatite. In all cases, IOL polishing using Nd:YAG laser had been attempted prior to IOL exchange. The clinical functional data showed that this type of IOL opacity led to increase in straylight and subjective symptoms of glare. Silicone IOLs can develop posterior surface calcification in eyes with asteroid hyalosis. There are mechanical techniques of cleaning the IOL surface but in many cases, IOL explantation is the only sustainable way to reduce the patients' straylight levels and glare symptoms. Due to the risk of posterior surface calcification, silicone IOL implantation should be avoided in eyes with asteroid hyalosis.

Using clinical optical coherence tomography to characterise contact lens edge shape and base curve radius

ABSTRACT Clinical relevance Clinical optical coherence tomography devices are widely used in optometry and ophthalmology and may be used to measure contact lens base curvature radius and visualise contact lens edge shape. Background Knowledge of contact lens geometry facilitates fitting, while optical coherence tomography provides a powerful means of measuring geometrical form. This study evaluates the performance of a clinical optical coherence tomography device (3D OCT-1000) in characterising contact lens edge shape and measuring the back optic zone radius of rigid gas-permeable contact lenses in vitro. Methods First, an opto-mechanical optical coherence tomography contact lens adaptor was designed and 3D-printed to facilitate a contact lens being imaged using a commercial optical coherence tomography device. Second, several image-processing algorithms and a simple calibration method were developed to measure the back optic zone radius in optical coherence tomography B-scans. Finally, based on the findings of two experiments, B-scan performance was evaluated in terms of 1) capacity to differentiate between contact lens edge geometries, and 2) capacity to obtain accurate and repeatable back optic zone radius measurements. Statistical and graphical analyses were performed to characterise reliability and reproducibility. Results The 3D OCT-1000 and adaptor combination was capable of acquiring images of sufficient quality to discriminate between soft and rigid contact lens edge geometries. Additionally, statistical analysis of the rigid contact lens measurements demonstrated satisfactory back optic zone radius measurement accuracy and reproducibility. Conclusion This study demonstrates that a 3D OCT-1000 fitted with an opto-mechanical adaptor combination can be used to assess contact lens edges in vitro and that this clinical optical coherence tomography device, combined with image processing and linear calibration of the B-scans, is capable of obtaining back optic zone radius measurements of rigid gas-permeable contact lenses that are close to the ISO 18,369-2:2018 manufacturing tolerance range (±0.05 mm).

Which OCT Measure of the Optic Nerve Head Improves Fastest? Towards Optimizing Early Detection of Resolving Papilledema in Children.

Optical coherence tomography (OCT) has been used to monitor papilledema. This study aims to determine which OCT-derived measures of the optic nerve head (ONH) detect resolving papilledema in children faster than standard OCT measures. Children (≤18years of age) with papilledema who completed optic nerve SD-OCT pretreatment and had evidence of treatment response on one or more follow-up OCTs within 4months were included. Standard (mean circumpapillary retinal nerve fiber layer [cpRNFL] thickness), device-derived (per-quadrant cpRNFL) and custom (ONH height, maximum Bruch's membrane displacement [BMD], ONH volume [ONHV], and BMD volume) OCT measures were calculated. Per-eye generalized estimating equations (GEEs) modelled changes in device-derived and custom measures as a function of mean cpRNFL to identify those measures that resolved faster during early (0-2months) follow-up. Mean cpRNFL coefficients of greater than 1 indicated faster resolving papilledema. We included 52 eyes of 29 children (mean age, 12.8years; 72.4% female). In analysis of early follow-up visits (38 eyes from 22 children), nasal cpRNFL and maximum BMD in each quadrant resolved faster than mean cpRNFL (GEE coefficients range, 1.14-3.37). Inferior cpRNFL, superior, nasal, and inferior ONH heights and ONHV resolved slower than mean cpRNFL (GEE coefficients range, 0.67-0.87). Nasal cpRNFL is a promising device-derived OCT measure for the early detection of resolving papilledema in children compared with mean cpRNFL. Maximum BMD, a custom measure, also shows promise, but its calculation has not yet been incorporated into commercial OCT devices. This study guides the optimal use of OCT in capturing resolving papilledema in children.

Comparison of central corneal thickness measured by automatic and manual analysis of optical coherence tomography.

To compare central corneal thickness (CCT) measured with optical coherence tomography (OCT) using an automatic algorithm (A-OCT) vs. manual measurements (M-OCT) with respect to the gold standard ultrasound pachymetry (USP). CCT measurements were performed on both eyes of 28 healthy subjects at four times of the day. A-OCT used an automatic software analysis of the corneal image, M-OCT was performed by two operators by setting a digital calliper on the corneal borders, and USP was performed after corneal anesthesia. Measurements were compared using a three-way repeated measures ANOVA. Bland-Altman plots were used to evaluate the agreement between OCT measurements and USP. Both A-OCT and M-OCT significantly underestimated the USP measures, with the mean difference, i.e., the systematic error, being larger for A-OCT (- 19.0µm) than for M-OCT (- 6.5µm). Good reproducibility between the two operators was observed. Bland-Altman plots showed that both OCT methods suffered from proportional errors, which were not affected by time and eye. Measuring CCT with OCT yielded lower values than USP. Therefore, clinicians should be aware that corneal thickness values may be influenced by the measurement method and that the various devices should not be used interchangeably in following up a given patient. Intriguingly, M-OCT had less systematic error than A-OCT, an important outcome that clinicians should consider when deciding to use an OCT device.

Optical coherence tomography imaging of the peripheral retina

Abstract: This review critically assesses the applicability of retinal periphery imaging technology, scrutinizing its practical limitations and potential advancements within ophthalmology. It underscores the significant costs and the need to evaluate the clinical utility of optical coherence tomography (OCT) and OCT angiography devices. It emphasizes how clinicians should consider their practice-specific use-cases while investing in devices with capabilities like ultra-widefield OCT, autofluorescence imaging, and angiography. The paper also highlights the challenges associated with image acquisition, such as artifact management and patient cooperation for extended fixation periods. This review outlines the utility of these modalities in various retinal pathologies, as well as their contribution to telemedicine and personalized care, facilitated by artificial intelligence for improved image processing, quantification, and interpretation. These techniques potentially offer a more comprehensive understanding of peripheral retinal conditions and associated pathologies, thus influencing clinical decision-making, particularly in remote regions with limited specialist access.

Corneal Tomography in a Commercially Available Optical Coherence Tomography Device and Comparison With a Rotating Scheimpflug Camera.

To compare the outcomes of corneal tomography obtained with an anterior-to-posterior segment optical coherence tomography device (Revo, Optopol Technologies Sp. z o.o.) and a rotating Scheimpflug camera (Pentacam AXL, Oculus Optikgeräte, Wetzlar, Germany). In healthy subjects, agreement in stereometric parameters commonly used in cataract and refractive surgery was assessed. Comparison between the devices was performed using correlation coefficients, the Bland-Altman method, and a paired t test. Results of right eyes of 78 patients (47 women) aged 25.24±5.56 years were analyzed. The flat and steep anterior keratometry values were significantly higher for Revo than Pentacam (43.65±1.58 D vs. 42.99±1.47 D; P = 0.000, and 44.53±1.57 D vs. 43.82±1.49 D; P =0.000, respectively) and showed excellent correlation ( r =0.978 and 0.974, respectively). The results for maximal keratometry manifested a higher difference (45.89±1.69 D vs. 44.27±1.51 D for Revo and Pentacam, P =0.000) but were also strongly correlated ( r =0.871). Revo showed significantly lower corneal thickness values than Pentacam, both for apex pachymetry (535.54±32.45 vs. 550.74±31.55 μm; P =0.000) and for thinnest pachymetry (522.58±32.16 vs. 547.25±31.95 μm; P =0.000). The correlation coefficients for anterior and posterior corneal elevation at the thinnest point showed weak positive correlation ( r =0.179 and 0.185), while the correlation for corneal asphericity was moderate ( r =0.317). There was a significant difference between keratometric values obtained with Revo and the Pentacam AXL, although the measurements showed excellent correlation. Similar results were found for corneal thickness measurements, but not for corneal surface elevation and corneal asphericity.

A review of retinal analysis by OCT in murine models Alzheimer's disease

Aims/Purpose: The use of murine models of Alzheimer's disease (AD) in the study of its pathophysiology is essential. In addition to a histological study of the retina, optical coherence tomography (OCT) allows a cost‐effective in vivo analysis of the retina. However, there is no standardization in the use of OCT in murine models of AD, leading to significant variations in study results. A review of the literature on murine models of AD analysed by OCT has been carried out. The characteristics of the animal model, the types of OCT, the retinal sectors analysed, the segmentation layers and the software used for segmentation were examined.Methods: We performed a literature search up to April 2023 using “MESH” terms in PubMed. The terms used were: “Alzheimer's mouse model”, “Optical Coherence Tomography”, “retinal optical coherence tomography” … as well as their combinations. We filter the articles by author criteria: the terms had to be in the title, in the abstract or in the article and they should be written in English or Spanish. Finally, 76 articles were used to the manuscript.Results: In comparison to studies using OCT in AD patients, only fourteen studies have utilized this technique to examine the retinas of murine AD models. Six different models, both first and second generation, were analysed, with most featuring presenilin mutations. There is no consensus regarding the measuring instrument, retinal area analysed, segmentation techniques, or software employed for analysis. Although some authors used the same OCT device, variations in other parameters hinder direct result comparison.Conclusions: It is essential to establish a unified criteria for OCT analysis of the retina in murine models of AD. This would allow the comparison of results and the establishment of measurement protocols. The use of OCT to understand the pathophysiology of AD would facilitate the longitudinal analysis of the disease and the possible identification of biomarkers.

Optic disc morphology and interocular symmetry in children.

The purpose of the study was to obtain a pediatric reference database for optic disc parameters and interocular symmetry. To ascertain factors that modify these parameters (age, spherical equivalent [SE], and sex). This was a cross-sectional study. 90 patients aged 5-17 years fulfilled all the inclusion criteria. After a full examination including cycloplegic refraction, all patients underwent optical coherence tomography (OCT) of the papilla using the three-dimensional (3D) scan protocol of the Topcon 3D 2000 OCT device. We provide reference values for optic disc parameters in the pediatric population. We also retrieved interocular symmetry reference values for these parameters. The multivariate regression analysis did not reveal variations in any of the optic disc parameters associated with age, sex, or SE (all P ≥ 0.126). The 95th percentile limit for absolute interocular differences for the cup-to-disc area ratio was 0.24. The multivariate regression analysis revealed the absence of a correlation between asymmetry of the optic disc parameters and age, sex, and the interocular difference in SE (all P ≥ 0.105). Pediatric reference databases for optic disc parameters and ranges of normality for interocular symmetry provide key diagnostic support in diseases that affect the optic nerve.

Detection of subretinal and intraretinal fluids in optopol SD‐OCT using transfer learning

Aims/Purpose: The detection of subretinal fluid (SRF) and intraretinal fluid (IRF) in optical coherence tomography (OCT) images plays a crucial role in the diagnosis and treatment of certain eye diseases. In this study, we investigated the performance of a Transfer Learning artificial intelligence (AI) technique, which we used to perform the model adaptation from the domain of Heidelberg OCT images to Optopol devices.Methods: A data set of 133 Optopol OCT images. 69 images indicating subretinal or intraretinal fluid and 64 fluid‐free images, were analysed. The AI algorithm that was initially trained on OCT images from Heidelberg device was fine‐tuned to perform the biomarker segmentation in Optopol (Revo NX, SOCT Copernicus REVO, REVO FC) OCT images. Manual assessments by the medical experts were used to evaluate the algorithm's performance.Results: Our findings demonstrate the promising performance of the domain‐adapted model. in detecting SRF and IRF, when initially trained on OCT images from a different device. The algorithm achieved an accuracy of 80% while classifying the presence versus absence of the fluids on the balanced test data set.Conclusions: The study demonstrates a successful application of a transfer learning technique for detection of subretinal and intraretinal fluids in OCT images acquired with the Optopol devices, indicating its potential for enhancing eye diagnostics. Further studies utilizing larger data sets, further biomarkers and diverse OCT devices are warranted to validate the algorithm's robustness and generalizability.