Operation Mechanism Research Articles

Perovskite Light‐Emitting Diodes Achieved by PVK Embellish ZnO Electron‐Transporting Layers

Currently, in metal halide perovskite light‐emitting devices, the interface between functional layers is crucial as it determines the injection and distribution of charge carriers. Herein, by inserting a poly[9‐vinylcarbazole] (PVK) layer between the sol–gel ZnO and perovskite layers, excessive electron injection is blocked, thereby improving the distribution of charge carriers in the device. Additionally, the trap density in the perovskite film is reduced. The performance of the device is enhanced, achieving a maximum current efficiency of 17.5 cd A−1, which represents a significant 30% improvement compared to devices without the PVK layer. This new understanding offers important implications for the operational mechanism of quantum light‐emitting diode.

Collaborative Optimization Scheduling of Source-Network-Load-Storage System Based on Ladder-Type Green Certificate–Carbon Joint Trading Mechanism and Integrated Demand Response

To fully leverage the potential flexibility resources of a source-network-load-storage (SNLS) system and achieve the green transformation of multi-source systems, this paper proposes an economic and low-carbon operation strategy for an SNLS system, considering the joint operation of ladder-type green certificate trading (GCT)–carbon emission trading (CET), and integrated demand response (IDR). Firstly, focusing on the load side of electricity–heat–cooling–gas multi-source coupling, this paper comprehensively considers three types of flexible loads: transferable, replaceable, and reducible. An IDR model is established to tap into the load-side scheduling potential. Secondly, improvements are made to the market mechanisms: as a result of the division into tiered intervals and introduction of reward–penalty coefficients, the traditional GCT mechanism was improved to a more constraining and flexible ladder-type GCT mechanism. Moreover, the carbon offset mechanism behind green certificates serves as a bridge, leading to a GCT-CET joint operation mechanism. Finally, an economic low-carbon operation model is formulated with the objective of minimizing the comprehensive cost consisting of GCT cost, CET cost, energy procurement cost, IDR cost, and system operation cost. Simulation results indicate that by effectively integrating market mechanisms and IDR, the system can enhance its capacity for renewable energy penetration, reduce carbon emissions, and achieve green and sustainable development.

The Impact of Financial Support Mechanisms and Geopolitical Factors on the Profitability of Investments in Solar Power Plants in Slovenia

This article examines the impact of financial support mechanisms and geopolitical factors on the profitability of investments in solar power plants within Slovenia. The European Union’s energy policy prioritizes increases in renewable energy sources, aiming to reduce dependency on unstable and volatile fossil fuel markets. Solar power plants play a vital role in this transition. The energy policy framework also includes mechanisms and support systems to operate such facilities. This article analyzes electricity price trends over the past decade and addresses which support type—guaranteed purchase or operational support—has proven more profitable for investments in solar power plants up to 50 kW in Slovenia, considering economic and geopolitical influences on the electricity market. Although the global energy market has been affected by various significant events in recent years, it was found that the COVID-19 pandemic had minimal impact on the electricity market. In contrast, the onset of the conflict in Ukraine has contributed to rising electricity prices and has influenced the support dynamics essential for the development and sustainability of renewable energy systems. Analyses from the past decade indicate a higher return on investment in solar power plants when operational support mechanisms are chosen over guaranteed purchase support.

Computational Investigation of the Operating Mechanism of the Ranque–Hilsch Vortex Tube

Abstract The Ranque–Hilsch vortex tube is a device that splits an incoming flow into two outgoing streams, but with the peculiar property that one stream exits at a lower total temperature than the incoming flow and the other at a higher total temperature. This temperature separation is accomplished without any moving parts, electronics or external power supplied to the device. Despite the passage of nearly a century since discovery of the effect, there remains a dearth of understanding regarding the mechanism responsible for the phenomenon. In fact, the literature contains competing theories with little evidence providing support. A promising technique to discern the responsible mechanisms for the energy transfer from the ultimately cold stream to the ultimately hot stream is to define a stream tube in a computational simulation of the flow that propagates upstream from the exits such that the stream tube interface separates the hot flow from the cold flow. In this article, we apply this method to a three-dimensional, full-volume analysis of the flow within a vortex tube using a computational simulation that was thoroughly validated against experiments on a physical replica of the computational geometry. In this novel study, the integral form of the energy equation was used to quantify all forms of the energy transfer within the vortex tube. The results demonstrate that the phenomenon of temperature separation is attributable primarily to viscous work in the radial direction due to the circumferential flow, with a lesser contribution from heat transfer in the radial direction.

Research on Integrated Management Path of Comorbidity Based on Grounded Theory.

This study seeks to thoroughly investigate the generation mechanism of the integrated management pathway for comorbidities, as well as its implementation and execution in practical settings. The findings aim to offer insights for the development of an integrated mechanism for comorbidity services. The collected raw data was coded and analyzed in depth by utilizing grounded theory as the research methodology, in conjunction with NVivo 14.0 software for qualitative analysis, and by adhering to domestic and international guidelines and consensus on comorbidity management. Following the three-level coding process, a total of 49 initial categories, 14 main categories, and 4 core categories (supply-type, demand-type, collaboration-type, and environment-type) were identified. Subsequently, a four-dimensional comprehensive comorbidities management pathway model, referred to as the "Derivative driving force-management pathway-main body network-operation mechanism," was developed. The model integrates the four paths of supply-type, demand-type, collaboration-type, and environment-type with the derived dynamics, subject network, and operation mechanism of comorbidities management. This not only enhances the comprehensiveness and continuity of comorbidities management but also establishes clear direction and evaluation indices for future empirical research.

Multifunctional Ultrathin Ti3C2Tx MXene@CuCo2O4 /PE Separator for Ultra-High-Energy-Density and Large-Capacity Lithium-Sulfur Pouch Cells.

The shuttling of lithium polysulfides (LiPSs), sluggish reaction kinetics, and uncontrolled lithium deposition/stripping remain the main challenges in lithium-sulfur batteries (LSBs), which are aggravated under practical working conditions, i.e., high sulfur loading and lean electrolyte in large-capacity pouch cells. This study introduces a Ti3C2Tx MXene@CuCo2O4 (MCC) composite on a polyethylene (PE) separator to construct an ultrathin MXene@CuCo2O4/PE (MCCP) film. The MCCP functional separator can deliver superior LiPSs adsorption/catalysis capabilities via the MCC composite and regulate the Li+ deposition through a conductive Ti3C2Tx MXene framework, enhancing redox kinetics and cycling lifetime. When paired with sulfur/carbon (S/C) cathode and lithium metal anode, the resultant 10 Ah-level pouch cell with the ultrathin MCCP separator achieves an energy density of 417Wh kg-1 based on the whole cell and a stable running of 100 cycles under practical operation conditions (cathode loading = 10.0 mg cm-2, negative/positive areal capacity ratio (N/P ratio) = 2, and electrolyte/sulfur weight ratio (E/S ratio) = 2.6 µL mg-1). Furthermore, through a systematic evaluation of the as-prepared Li-S pouch cell, the study unveils the operational and failure mechanisms of LSBs under practical conditions. The achievement of ultrahigh energy density in such a large-capacity lithium-sulfur pouch cell will accelerate the commercialization of LSBs.

Investigation of paeonol in dermatological diseases: an animal study review.

Cortex Moutan is the root bark of the buttercup plant Paeonia suffruticosa Andr, of Ranunculaceae family. It has been utilized in Chinese medicine for thousands of years to treat a multitude of diseases, and traditional Chinese documents allege that it has heat-clearing, antipyretic, anti-inflammatory and detoxicating properties. Paeonol is a bioactive substance extracted from Cortex Moutan, which is considered to be one of its most effective metabolites. Recent studies have illustrated that paeonol treatment can alleviate skin damage, relieve the inflammatory response in patients with numerous dermatological conditions, and inhibit anomalous proliferation of skin tissue. Accordingly, paeonol may serve as a potential therapeutic agent for a variety of skin conditions. This review summarizes the physicochemical properties and pharmacokinetics (PK) characteristics of paeonol, and mechanisms of operation in diverse skin diseases, including dermatitis, psoriasis, pruritus, photoaging, hyperpigmentation, and hyperplasticscar. Additionally, much of the evidence is based on animal experiments. Furthermore, it explores the prospects of enhancing paeonol's efficacy through extraction, synthesis, and formulation innovations, as well as strategies to overcome its limitations in dermatological therapy. This review aims to provide a more reliable theoretical basis for the clinical application of paeonol.

Godfatherism, Power Dynamics and Economic Growth in Nigeria

This study investigated the impact of godfatherism on power dynamics and economic growth in Nigeria, addressing a research gap on the specific mechanisms through which political patronage affects governance and economic outcomes. Focusing on the Owerri Education Zone in Imo State, the study explored the depth of godfatherism’s influence, its operational mechanisms, and potential strategies for mitigation. Using a descriptive survey design, data were collected from a sample of 400 participants, including political analysts, government officials, and members of the electorate, selected from a population of over 300,000 through stratified random sampling. A structured questionnaire, validated by experts, was administered to gather insights on the role of godfatherism in resource allocation and economic policy manipulation. Data were analyzed using descriptive statistics, with mean and standard deviation employed to summarize responses. The findings revealed that godfatherism significantly undermines economic growth by prioritizing powerful individuals’ interests, often at the expense of broader societal needs. Specific mechanisms, including political patronage, electoral financing, and policy manipulation, emerged as key pathways through which resource inequality and corruption are sustained. Notably, 68% of respondents identified policy manipulation as a primary factor in resource misallocation. The study contributes to the literature by offering empirical evidence of godfatherism’s economic effects and recommending reforms, including legal frameworks, enhanced electoral processes, civic education, and accountability mechanisms, to curb its influence. These insights are critical for policymakers aiming to foster transparent governance and sustainable development in Nigeria.

Novel power MOSFET with drain-side N–Si/N-SiGe heterojunctions for improving reverse recovery performance

—A novel power MOSFET structure with Drain-side N–Si/N-SiGe Heterojunctions (DH-MOS) is proposed by introducing a N SiGe region which is sandwiched between the N-drift region and N+ substrate on the drain side. The operation mechanism and simulation verification of DH-MOS are presented. Due to the difference in valence band of N Si/N SiGe heterojunction, holes can be more easily expelled from the N-drift region into N SiGe region during the reverse conduction of DH-MOS, resulting in a significant reduction in hole density inside the N-drift region, thus improving the reverse recovery performance. Simulation results show that the reverse recovery charge (Qrr) of DH-MOS is 2.08 μC/cm2, approximately 66.34 % lower than the 6.18 μC/cm2 of conventional MOS. The introduction of new DH-MOS structure with N–Si/N-SiGe heterojunctions does not result in a significant increase in reverse conduction voltage (VF). In addition, it does not sacrifice any forward conduction and blocking characteristics. The proposed DH-MOS introduces changes on the drain side, unlike existing methods which focus on the source side or drift region. And it can be compatible with existing improving measures to further improve the reverse recovery performance.

Adaptive Multi-Function Radar Temporal Behavior Analysis

The performance of radar mode recognition has been significantly enhanced by the various architectures of deep learning networks. However, these approaches often rely on supervised learning and are susceptible to overfitting on the same dataset. As a transitional phase towards Cognitive Multi-Functional Radar (CMFR), Adaptive Multi-Function Radar (AMFR) possesses the capability to emit identical waveform signals across different working modes and states for task completion, with dynamically adjustable waveform parameters that adapt based on scene information. From a reconnaissance perspective, the valid signals received exhibit sparsity and localization in the time series. To address this challenge, we have redefined the reconnaissance-focused research priorities for radar systems to emphasize behavior analysis instead of pattern recognition. Based on our initial comprehensive digital system simulation model of a radar, we conducted reconnaissance and analysis from the perspective of the reconnaissance side, integrating both radar and reconnaissance aspects into environmental simulations to analyze radar behavior under realistic scenarios. Within the system, waveform parameters on the radar side vary according to unified rules, while resource management and task scheduling switch based on operational mechanisms. The target in the reconnaissance side maneuvers following authentic behavioral patterns while adjusting the electromagnetic space complexity in the environmental aspect as required. The simulation results indicate that temporal annotations in signal flow data play a crucial role in behavioral analysis from a reconnaissance perspective. This provides valuable insights for future radar behavior analysis incorporating temporal correlations and sequential dependencies.

Molecular Break Junction: A Stage for Redox Transformations

AbstractAn exceptionally brilliant strategy to miniaturize electronic devices is to employ a single‐molecule between two electrodes for carrier conduction at single‐molecule break junctions (SMBJ). To understand the intrinsic mechanisms of operation at these junctions, extremely crucial is to study physical, chemical, and electrochemical properties employing single‐molecules at SMBJs. Further, redox‐based transformations at the nano‐junction could be achieved electrochemically to allow efficient switching between different redox states of a single‐molecule, showcasing the possibility of maneuvering transport properties with on‐off states of the molecule. Herein, are presented the fundamentals of SMBJs, and the electrochemically influenced transformations or switching of organic molecules pursued at SMBJs. Such an understanding of electrochemical phenomena at the nanoscale dimension could bridge the knowledge gap between macroscopic electronic circuits and single‐molecule electronic circuits, whereby the feasibility of switching between the states could maneuver the electronic properties as well as other photophysical parameters.

A dynamic word conversion indicator based on water resistance poly (vinyl alcohol)/basic lead acetate nanofibers for monitoring shrimp freshness

Visual monitoring of seafood is particularly important for dietary health. Hydrophilic materials provide more direct visual results, yet improving their water resistance while maintaining high sensitivity is challenging. In response, we introduce a visual monitoring fibrous film characterized by high water resistance and sensitivity. A poly (vinyl alcohol)/basic lead acetate (PVA/Pb) nanofiber film responding to hydrogen sulfide (H2S) released during seafood spoilage, employing poly (vinyl alcohol) (PVA) as the support and basic lead acetate (Pb(Ac)2) as the indicator, has been fabricated through electrospinning. Through studies on different crosslinking durations, 4 h was found optimal, giving the film satisfactory water resistance (with a mass loss rate of 35.93%) and sensitivity (2.3 ppm−1), alongside investigations into its operational mechanism. To enhance the widespread application of the PVA/Pb nanofiber film, we employed its color transition from white to brown as a dynamic word conversion indicator (DWCI), accurately indicating shrimp freshness from “edible" to “inedible". This innovative design provides a clear and convenient solution for special populations (including visually impaired individuals, older people, and children), enabling barrier-free real-time detection of seafood freshness.

Optimization operation strategy of wind–pumped storage integrated system participation in spot market considering dual uncertainties

Abstract With the gradual increase in the penetration rate of renewable energy, the multifunctional role of pumped storage is becoming increasingly prominent, and the joint operation of “renewable energy + pumped storage” is a current research hotspot. However, during the joint system operation, there are dual risks from internal (renewable energy output) and external (market prices) factors, which significantly impact the system’s overall revenue. Therefore, an analysis is conducted around the operational mechanism of the “wind power–pumped storage” joint operation, and the uncertain factors faced during the system’s operation are identified. Second, an optimization model for wind power–pumped storage under deterministic scenarios is constructed, employing robust optimization theory and information gap decision theory to describe the uncertainty of electricity prices and wind power, thus forming a hybrid of the information gap decision theory and the robust optimization model for wind power–pumped storage. Finally, the results show that: (1) The total revenue of the model proposed in the paper has increased by 2.36% compared to the robust optimization model and by 9.04% compared to the deterministic model, significantly enhancing the model’s robustness and risk resistance capabilities. (2) From the perspective of the economic feasibility of different energy storage system configurations, the wind plant equipped with pumped storage has the highest economic feasibility, with an internal rate of return of 9.8% and net present value of 872 million Chinese Yuan, which is higher than that of compressed air energy storage and electrochemical energy storage systems. (3) Decision makers can set the risk deviation coefficient and the uncertainty budget according to their risk preferences, thereby changing the robustness of the model for differentiated decision making. However, an increase in the uncertainty budget coefficient will cause the total revenue of the joint operation system first to increase and then decrease, with the maximum revenue achievable within the range of 500–625; the total revenue reaches its maximum when the risk deviation coefficient is between 0.1 and 0.125.

An evaluate of ORR catalysts in fuel cell: Current Advances and Applications

Abstract. This thesis presents a comprehensive review of fuel cell technology, with a specific emphasis at the latest trends and programs of oxygen reduction response (ORR) catalysts. The examine starts offevolved with the aid of using evaluating the benefits and drawbacks of hydrogen fuel cells with different alternative power sources, which include sun power and secondary batteries, highlighting the ability of fuel cells to update traditional inner combustion engines because of their high power density and environmental benefits. The thesis then explores the essential running ideas of fuel cells and examines their operational mechanisms in numerous chemical environments. In the context of ORR catalysts, the assessment evaluates quite a number catalysts, which include precious metal catalysts, non-precious metal catalysts, and single-atom catalysts, that specialize in techniques to decorate their activity and stability. Finally, the thesis discusses the demanding situations and destiny possibilities for the industrial application of ORR catalysts in hydrogen fuel cells.

A Study of the Tennis Trust-Based System on the Psychology and Cognition of Amateur Tennis Enthusiasts.

Currently, amateur tennis events are developing rapidly, and the trust system has become a common rule, integrating considerations of entertainment, fitness, and cost control. However, human-centered trust system rules still face some controversy, and there is limited specialized research on the topic. This study explores amateur tennis players' perceptions of the trust system rules. Using focus group discussions and interviews, we collected semi-structured interview data from 23 participants in tennis events. Based on grounded theory and the perceptual cycle model (PCM) framework, we developed a theoretical model of the tennis trust system and a model of the operational mechanism of the tennis trust system. Based on the grounded theory model results, four main factors influencing the tennis trust system were identified: interest orientation, information acquisition and judgment, communication and interaction, and development strategies. The operational mechanism model based on the PCM framework explains that the functioning of the tennis trust system includes five stages: foundation stage, trust-based emergence stage, monitor and detect stage, anticipate and respond stage, and development improvement stage. Among these stages, the anticipate and respond stage is crucial for the effectiveness of the trust system and is also the stage most prone to controversy. To address this, we propose targeted improvements to enhance the fairness of the tennis trust system and meet the needs of amateur tennis events.

Design and implementation of terminal power information collection and control system based on low-code platform

Abstract As the number of power consumption collection terminals continues to increase, the business needs for remote signaling and telemetry data collection through interface services continue to expand. Different professional collection front-end openness levels and open standards are not unified, and each professional terminal can only be managed in a decentralized manner. As a result, the current power consumption information data collection capabilities are scattered. In general, active data collection and sensing in enterprises must rely on various collection services to carry out applications. The lack of unified operation and management mechanisms and tools leads to difficulties in the development of interfaces and the management of terminal equipment. A set of power consumption information collection service integration systems developed based on a low-code platform is proposed. In view of the different communication protocols of power terminals and the need to develop different interfaces, etc., the command issuance and message encapsulation of different power collection protocols is carried out, to provide customized collection services and improve unified access and management capabilities of terminals.

A Systematic Review of Brake Pad

The brake system is a mechanism that allows the vehicle to slow down and remain stationary. Most automobiles uses either one or both disk brake and drum brake system. These brake system components include the brake pedal, brake lines, brake master cylinder, brake booster, brake calipers, brake rotors/drum, and brake pads. The greatest load in the braking of a vehicle falls both on the discs and pads. The friction caused by braking on these parts results in a large amount of heat transfer and particulate emission. Therefore, studies on the brake system have focused on human health, the environment and the economy, in addition to investigating the operation, performance and wear mechanisms of the system. In this study, researchers, citations, keywords, and trending topics of 1,118 studies on brake pad between 1982 and 2023 were investigated by systematic analysis method using R and VosViewer analysis programs. A brief summary of the most cited papers and their topics is given to help researchers who will conduct studies on brakes. These studies focused on wear and emission issues. Non-exhaust emissions have adverse effects on air, aqueous media, roadways and human health. Therefore, it has become mandatory to limit these small particles, which is why they are included in the Euro 7 emission standard. Due to the limitations on braking, future researchers have been informed about the status of non-exhaust emissions.

Solar-Powered Refrigeration for Sustainable Refrigerated Transport

Abstract Solar-powered refrigeration systems offer a feasible and promising solution for enhancing the sustainability of refrigerated transportation. This paper provides a comprehensive overview of the design and construction of a solar-powered refrigeration unit tailored for a refrigerated van, featuring photovoltaic (PV) panels mounted on the rooftop of the refrigerated box. The key components and operational mechanisms of the unit are also highlighted. The study reports on five preliminary experimental tests conducted to validate the feasibility and efficacy of a transport refrigeration unit (TRU) powered by solar energy. These tests demonstrate the impact of the PV solar system on the energy balance of the refrigerated unit under various environmental and operational conditions. The results indicate that the photovoltaic system enables autonomous operation of the refrigeration unit for 2.5 hours at a set point of -18°C (suitable for frozen products) and over 5 hours at +4°C (suitable for fresh products), assuming afternoon deliveries starting at 14:00 with climatic conditions typical of June and July in Fisciano, Salerno, Italy. These findings support the feasibility of sustainable regional and inter-regional transportation. The study also evaluates the effect of different starting times, revealing an increase in the duration of autonomous operation by up to 35% for transportation at 0°C when the start time is shifted from 14:00 to 11:00. Furthermore, the research assesses emission savings, identifying reductions between 4.1 and 4.4 kgCO2,e per delivery at set point temperatures of -18 °C and +4 °C, respectively. This range is even wider when considering earlier starting time (up to 5.4 kgCO2,e per delivery in the tests performed). This underscores the significant potential of solar-powered solutions in advancing the decarbonization of the cold chain. This research aims to inform policymakers and technology developers about the potential of deploying solar-based solutions in the refrigerated transport sector.

A Novel Fast Contact Operating Mechanism of the Medium and Low Voltage Hybrid DC Current Limiting Circuit Breaker

In order to solve the problem of the slow initial speed caused by the large mass of the bistable permanent magnetic actuator (PMA) in the traditional bistable permanent magnetic–electromagnetic repulsion mechanism (PM-ERM), a novel fast contact operating mechanism is proposed by using the flexible spring system (SS) between the PMA and the ERM. The novel structure can separate the mass of the PMA and the ERM at the initial phase of the interrupting process, improve the initial speed of the contact and increase the initial opening distance of the contact. Firstly, the paper conducts an extensive investigation and analysis of the principle of the existing fast operating mechanism and points out the advantages and disadvantages of the existing mechanism. In order to meet the requirement of fast interrupting and improve the service life of the mechanism, a novel mechanism is proposed. And then, the working principle of the novel mechanism is introduced. The cooperative relationship between the ERM and the PMA and the working principle and performance parameter requirements of the ERM, SS and PMA are analyzed and designed. Finally, the feasibility of the novel mechanism is verified by the experiment. The results show that the opening distance of the novel operating mechanism can reach 2.25 mm in 1 ms. Compared with 1.24 mm of the traditional operating mechanism, it improves the initial opening distance of the contact by 81.5% and is conducive to the rapid interruption of the Hybrid DC current-limiting circuit breaker (HDCCLCB).

Biomass-Based Gas Turbine Systems for Power Generation: Sustainable Feedstocks and Environmental Benefits

This paper explores the significance and operational mechanisms of biomass-based gas turbine systems, which present a renewable and sustainable substitute for conventional fossil fuel-based electricity production methods. These systems utilize biomass as a source of fuel to produce heat, which is then converted into power through a gas turbine. The process involves the combustion of biomass fuel to heat a working fluid, such as air, which subsequently drives the turbine to produce electricity. Biomass can be derived from various organic materials, encompassing urban solid trash, forest residues, and agricultural residues, making it a versatile and sustainable fuel option. The paper also includes a practical case study, highlighting the system's advantages and disadvantages. Additionally, it identifies future trends, emphasizing the importance of efficiency enhancement. To achieve this, scientists are increasingly proposing hybrid systems that combine biomass-based gas turbines with other technologies. This approach aims to optimize performance, reduce emissions, and contribute to guaranteeing a future with more sustainable energy. The study underscores the potential of biomass-based gas turbine systems to play a crucial part in the shift to renewable energy sources.