Operation Of Battery Energy Storage System Research Articles

Grid-integrated solutions for sustainable EV charging: a comparative study of renewable energy and battery storage systems

IntroductionThe integration of electric vehicles (EVs) into the power network challenges the 1) grid capacity, 2) stability, and 3) management. This is due to the 1) increased peak demand, 2) infrastructure strain, and 3) intermittent charging patterns. Previous studies lack comprehensive integration of renewable energy and battery storage with EV charging.MethodsTo address these challenges, this study explores the effectiveness of incorporating renewable energy resources (RERs) and battery energy storage systems (BESS) alongside the traditional grid. The proposed study utilizes the HOMER Grid® and conducted a comprehensive analysis.ResultsThe proposed study compares two grid integrated scenarios: 1) Case-1 (grid and photovoltaic (PV) systems), and 2) Case-2 (grid, PV systems, and BESS). Both these scenarios are compared against a Base case relying solely on grid power. The evaluation employed techno-economic analysis while focusing on 1) net present cost (NPC), 2) cost of energy, and 3) annualized savings. Additionally, the proposed study analyzed 4) seasonal variations in EV charging demand, 5) grid interactions, 6) PV production, and 7) the operation of BESS in both summer and winter. The comparative analysis reveals that the Base case incurs a net present cost (NPC) of $546,977 and a cost of energy (COE) of $0.354 per kWh. In contrast, Case-1, which integrates a 100 kW PV system, shows a significantly lower NPC of -$122,962 and a reduced COE of -$0.043 per kWh, with annualized savings of $61,492. Case-2, incorporating both the 100 kW PV system and a BESS with a capacity of 9.8 kWh, has a higher NPC of $309,667 but a COE of $0.112 per kWh and provides annual savings of $51,233 compared to the Base case.DiscussionSeasonal analysis highlights that Case-2 achieves the lowest carbon emissions in summer, ranging from 2.0 to 2.5 tons, while Case-1 shows the lowest emissions in winter, ranging from 3.2 to 3.4 tons. This model 1) reduces operational costs, 2) minimizes carbon emissions, while 3) making it compelling for future energy systems in increasing EV adoption.

Stochastic Convex Cone Programming for Joint Optimal BESS Operation and Q-Placement in Net-Zero Microgrids

Microgrids have emerged as a pivotal solution in the quest for efficient, resilient, and sustainable energy systems. Comprising diverse distributed energy resources, microgrids present a compelling opportunity to revolutionize how we generate, store, and distribute electricity, while simultaneously reducing carbon footprints. This paper proposes an optimal battery energy storage system (BESS) management scheme, along with capacitor placement for reactive power (Q)-compensation, and scheduling for the purpose of a renewable-based microgrid’s loss minimization. The proposed model evaluates the impact of BESS management on energy efficiency and analyzes how optimal scheduling of BESS influences system losses. Furthermore, it investigates the coordinated planning and operation of active assets within the microgrid, such as controllable capacitor banks, in enhancing overall efficiency. The model is formulated as a mixed-integer second-order cone programming (MISOCP) problem which is solved for both deterministic and stochastic generation and consumption data. The proposed model is tested on a 21-bus microgrid comprising photovoltaic and hydropower energy resources, and the efficacy of the model is approved by several case studies. The simulation results show that the proposed method can reduce microgrid energy losses by approximately 12 percent using the deterministic approach and around 14 percent with the stochastic approach.

Enhancing Distribution Networks with Optimal BESS Sitting and Operation: A Weekly Horizon Optimization Approach

The optimal sitting and operation of Battery Energy Storage Systems (BESS) plays a key role in energy transition and sustainability. This paper presents an optimization framework based on a Multi-period Optimal Power Flow (MOPF) for the optimal sitting and operation of BESS alongside PV in active distribution grids. The model was implemented in AMPL (A Mathematical Programming Language) and solved using the Knitro solver to minimize power losses over one week, divided into hourly intervals. To demonstrate the applicability of the proposed model, various analyses were conducted on a benchmark 33-bus distribution network considering 1, 2 and 3 BESS. Along with the reduction in power losses of up to 17.95%, 26% and 29%, respectively. In all cases, there was an improvement in the voltage profile and a more uniform generation curve at the substation. An additional study showed that operating over a one-week horizon results in an energy gain of 1.08 MWh per day compared to single daily operations. The findings suggest that the proposed model for optimal sitting and operation of BESS in the presence of Renewable Energy Sources (RES) applies to real-world scenarios.

Novel Frequency Regulation Scenarios Generation Method Serving for Battery Energy Storage System Participating in PJM Market

As one of the largest frequency regulation markets, the Pennsylvania-New Jersey-Maryland Interconnection (PJM) market allows extensive access of Battery Energy Storage Systems (BESSs). The designed signal regulation D (RegD) is friendly for use with BESSs with a fast ramp rate but limited energy. Designing operating strategies and optimizing the sizing of BESSs in this market are significantly influenced by the regulation signal. To represent the inherent randomness of the RegD signal and reduce the computational burden, typical frequency regulation scenarios with lower resolution are often generated. However, due to the rapid changes and energy neutrality of the RegD signal, generating accurate and representative scenarios presents challenges for the methods based on shape similarity. This paper proposes a novel probability-based method for generating typical regulation scenarios. The method relies on the joint probability distribution of two features with a 15-min resolution, extracted from the RegD signal with a 2 s resolution. The two features can effectively portray the characteristic of RegD signal and its influence on BESS operation. Multiple regulation scenarios are generated based on the joint probability distributions of these features at first, with the final typical scenarios chosen based on their probability distribution similarity to the actual distribution. Utilizing regulation data from the PJM market in 2020, this paper validates and analyzes the performance of the generated typical scenarios in comparison to existing methods, specifically K-means clustering and the forward scenarios reduction method.

Revenue stacking of BESSs in wholesale and aFRR markets with delivery guarantees

Battery Energy Storage Systems (BESSs) provide a crucial solution for mitigating the challenges posed by renewable energy intermittency, concurrently driving down energy costs within wholesale markets. To harness their potential, innovative business models are required for optimal BESS operation and revenue maximisation. This paper addresses this need by proposing a novel revenue stacking approach for the participation in Day-Ahead and automatic Frequency Restoration Reserve (aFRR) markets. By considering the uncertainty in the activation of aFRR events, the proposed model provides real-time delivery guarantees for a given reliability level, while maximising the revenues. The model is built over a novel characterisation of the uncertainty and a tight reformulation of the joint chance-constraints that drive energy and capacity guarantees. The effectiveness of the proposed approach is demonstrated through a case study based on real data from the Belgian market, yielding a 17.3% increase in profits over the individual chance-constraints approach.

Optimal dispatch strategy of battery energy storage system in utility-scale photovoltaic integrated grid under variability

The frequency response of a photovoltaic (PV) system integrated power grid is severely hampered due to inadequate inertial support. Integrating a battery energy storage system (BESS) can assist in maintaining frequency response by providing a rapid injection of active power into the grid. Nevertheless, instead of typical constant droop settings enabled in BESS, adopting variable PV power dependent operation of BESS can ensure frequency stability with reduced injection, especially in PV-integrated grids. From this viewpoint, this paper proposes a novel frequency control approach of BESS depending on the available PV power in the grid. A gradient descent-based optimization is utilized to evaluate the required maximum injection from the installed BESS to maintain frequency response under different PV generation values. This approach is then tested by modifying the BESS frequency controller to keep the active power dispatch from BESS within the calculated value under a given outage. The whole methodology is analyzed in a customized IEEE 39 bus New England System under different PV penetration and generation scenarios. The results indicate successful convergence to optimal dispatch levels for the BESS across all evaluated scenarios. As PV generation increases, the optimal BESS dispatch as a percentage of rated PV output declines gradually. However, at lower PV generation, this value rises rapidly and reaches the installed BESS capacity. Later, the applicability of the methodology is validated by comparing the simulated outputs with different test grid network and another support technique- Synchronous Condenser (SC). From the standpoint of frequency stability, the proposed technique can assist the grid planners in regulating BESS operations in a renewable integrated grid more effectively.

Smart optimization in battery energy storage systems: An overview

The increasing drive towards eco-friendly environment motivates the generation of energy from renewable energy sources (RESs). The rising share of RESs in power generation poses potential challenges, including uncertainties in generation output, frequency fluctuations, and insufficient voltage regulation capabilities. As a solution to these challenges, energy storage systems (ESSs) play a crucial role in storing and releasing power as needed. Battery energy storage systems (BESSs) provide significant potential to maximize the energy efficiency of a distribution network and the benefits of different stakeholders. This can be achieved through optimizing placement, sizing, charge/discharge scheduling, and control, all of which contribute to enhancing the overall performance of the network. In this paper, we provide a comprehensive overview of BESS operation, optimization, and modeling in different applications, and how mathematical and artificial intelligence (AI)-based optimization techniques contribute to BESS charging and discharging scheduling. We also discuss some potential future opportunities and challenges of the BESS operation, AI in BESSs, and how emerging technologies, such as internet of things, AI, and big data impact the development of BESSs.

Assessing the economic viability of BESS in distributed PV generation on public buildings in Brazil: A 2030 outlook

This paper proposes a method to assess the financial attractiveness provided by adding a Battery Energy Storage System (BESS) in distributed photovoltaic (PV) generation on public buildings in Brazil. The method is applicable to prosumer units (PU) connected on the medium voltage grid operating under time-based electricity tariffs. The BESS primary objective was to achieve optimal reductions in electric energy expenses through effective energy arbitrage mechanisms. The procedural steps of the methodology begin with an analysis encompassing assessment of solar resource, PU consumption profile, and BESS sizing and operation. Subsequently, steps entail contracted power optimization, PU net-metering analysis, and evaluation of BESS impacts on electric energy expenses. Lastly, a regulatory and economic analysis is conducted incorporation considerations on BESS taxation, behind-the-meter regulations, and a sensitivity assessment extending to the 2030 outlook. By 2050, it is anticipated that PV generation will surpass hydropower, becoming the predominant component of Brazil's energy mix. This shift is expected to create an increased need for solutions, notably storage systems, capable of meeting flexibility requirements and maintaining grid resilience. The results suggest that the financial viability of incorporating BESS becomes favourable when the battery cost is below 365 $/kWh. In approximately 50% of the Brazilian territory, prevailing economic conditions support the adoption of BESS. Nationwide feasibility of integration is anticipated for the year 2027. It was observed that government policies to exempt BESS taxation, even if temporary, would be extremely interesting to promote the widespread adoption of this technology. The 2030 outlook of the transition to these benign renewable energy technologies is already in place, and will dominate the energy mix.

Distributed Control of HVAC-BESS under Solar Power Forecasts in Microgrid System

This paper investigates an energy management problem in the microgrid by scheduling heating ventilation air conditioning (HVAC) and battery energy storage system (BESS) with a distributed algorithm. A multi-layer energy management architecture is presented at a system-level to co-optimize the HVAC-BESS by taking into account solar energy forecasts. A surplus-based consensus algorithm is proposed to solve the optimization problem, where the local power mismatch is introduced as a surplus term, and the HVAC-BESS can thus be co-scheduled to maximize renewable energy efficiency at the peak generation time. A set of the convex cost functions are formulated to minimize the HVAC's user dissatisfaction degree and alleviate power loss during the BESS operation. The goal is to collectively minimize the total energy cost in a distributed manner, subject to individual load constraints and power balance constraints. It is theoretically proved that a global convergence of the proposed algorithm is achieved provided that the directed network is strongly connected. The results from a number of case studies are promising, demonstrating the effectiveness and robustness of the algorithm under practical scenarios.

A real-time thermal behaviour monitoring and analysis of a 500 kWh grid-connected battery energy storage system

Statistical analysis yields critical data for risk evaluation and management of a stationary battery energy storage system (BESS). Lithium-ion (Li-ion) batteries have attained huge attention for both stationary and non-stationary applications due to their lucrative features such as lightweight, high energy density efficiency, and long lifespan. However, detailed analysis and trends subjected to thermal behaviour of the device especially in grid-connected BESS application is still neglected. Therefore, this paper presents a statistical analysis for thermal behaviour of a grid connected BESS. The significance of Li-ion battery employing battery thermal management is presented, which can guarantee a reliable and safe operation as well as examining the effect of voltage, current and state of charge (SOC) on BESS operation. The large group of datasets recorded daily with five-minute intervals are difficult to be analysed numerically in a timely manner. Thus, the analysis can be made by visualizing the numerical data that was retrieved through representational state transfer (REST API) for easier interpretation and trend analysis. The visualization is made using Microsoft Power BI and presented in this paper.

Operation scheduling strategy of battery energy storage system with the integration of differenced power constraint factor

The battery energy storage system (BESS) as a flexible resource can effectively achieve peak shaving and valley filling for the daily load power curve. However, the different load power levels have a differenced demand on the charging and discharging power of BESS and its operation mode. For further improving the efficiency of BESS in a demand response process, the differenced power demand should be incorporated into the BESS operation schedule. Therefore, this paper proposes a BESS operation scheduling strategy to satisfy the differenced demand based on the control of the power constraint factor. Firstly, a boundary moving method is used to solve the charging and discharging thresholds of BESS to determine the optimal charging and discharging periods. Secondly, a charging and discharging demand degree model is constructed based on the hourly charging and discharging demand. Thirdly, a BESS scheduling model with a minimum standard deviation of daily load curve is established for enhancing the peak shaving and valley filling. Finally, the case study shows that the proposed strategy can further improve the efficiency of BESS participating in demand response, improve the smoothness of the load power curve, and decrease the peak-valley difference.

Management of electric vehicle charging stations in low-voltage distribution networks integrated with wind turbine–battery energy storage systems using metaheuristic optimization

This study investigates the IEEE 69-bus distribution network with three wind turbines (WTs) connected at the same buses of three battery energy storage systems (BESSs), with three 20- or 30-outlet electric vehicle charging stations (EVCSs) for charging electric vehicles (EVs). The honey badger algorithm (HBA) is adopted to minimize daily energy loss. The HBA determines the best size and position for three WT-BESS buses and three EVCS buses. The HBA calculates BESS size and operation mode to minimize daily energy loss. The demand of EVCSs varies throughout the day depending on the random choice of the number and state of charge of EVs entering the station. This results in the active and reactive energy losses and utility input energy decreasing by 63.5%, 60.6% and 59.6%, respectively, and the minimum voltage increasing from 0.9256 to 0.9839 pu. The network voltage profile and stability are also improved.

Service stacking on residential BESS: RES integration by flexibility provision on ancillary services markets

Opening the Balancing Markets (BMs) to Renewable Energy Sources (RES) and Battery Energy Storage Systems (BESS) could support the integration of RES in decarbonizing power systems; nevertheless, the limited energy content of BESS can reduce their reliability on the BMs. A novel control strategy for revenue stacking of behind-the-meter and front-of-the-meter services on a domestic prosumer equipped with photovoltaic production and BESS is presented in this study. The aim is to maximize self-consumption and the economics while guaranteeing BESS state-of-charge management. A new control (and bidding) strategy is developed to offer the available energy (and power) margins on the Italian BMs, without saturating or depleting the energy content. The results show synergies between self-consumption maximization and flexibility provision, i.e., the proposed approach demonstrates how a multiservice-oriented operation of BESS improves the economic sustainability of the solution, with a payback time between 5 to 9 years, decreases the energy exchange with the public grid and the RES imbalance (imbalance reduced by 90%), and provides flexibility with high reliability (ranging 89%–97%). Due to this, the strategy of reducing the imbalance of variable RES and then providing flexibility with the left margins candidates itself as a standard routine for massively integrating RES via BESS.

Development, validation, and testing of advanced mathematical models for the optimization of BESS operation

Current decarbonization strategies are driven by the fast-paced diffusion of non-programmable renewable energy sources (NP-RESs), mainly through solar and wind power generation. Energy storage technologies are emerging as key solutions for coping with the variability and low-inertia characteristics of NP-RESs. Particularly, battery energy storage systems (BESS) are diffusing more widely for both behind-the-meter (BTM) and utility-scale applications. In this context, we still lack a shared solution on how to proceed from the on-field data collected about the performance of BESS to reliable and fast mathematical formulations for operational optimization. This study provides a validated modeling framework that can be exploited during or after BESS commissioning to (i) identify and derive the useful parameters to characterize BESS performances, (ii) formalize them in a mathematical formulation while being aware of its specific trade-off between accuracy and computational effort, and (iii) exploit the selected BESS model within a multi-energy system optimization problem. We discuss three different modeling approaches that we developed for optimizing BESS operation, with each providing a different balance between modeling accuracy and computational effort. These three mathematical models were validated against a numerical simulation model based on on-field performance data, and they were eventually tested on a reference case study. The results indicate that it is possible to restrict the average error in estimating BESS efficiency while simultaneously limiting the computational effort of the model. Regarding the operation of BESS, the conducted simulations demonstrate that an approximate BESS model may result in an overestimation of the expected revenues.

Power management of grid-connected PV wind hybrid system incorporated with energy storage system

Renewable Energy Sources (RES) such as solar photovoltaic (PV) and wind-based generation cannot meet dynamic load demand all the time because of their intermittent nature. Battery Energy Storage System (BESS) is integrated with RES to meet dynamic load demands. Proper power management is needed for the efficient and reliable performance of the system. This paper presents power management of PV-Wind- Battery hybrid system for both grid-connected and islanded modes of operation as well. The power balance is maintained by a power management system (PMS) under different environmental conditions and load conditions, and modes of operation. The control method for state-of-charge (SOC) and battery charge/discharge is applied to ensure efficient performance and safe operation of BESS. Different cases, such as surplus/deficit power available from RES with respect to load demand and battery capacity, have been considered and carried out to verify the performance of PMS using the MATLAB/Simulink platform.

Multi-objective architecture for strategic integration of distributed energy resources and battery storage system in microgrids

Microgrids with integrated renewable energy-based distributed generation (RDG) and battery energy storage systems (BESS) should be effectively designed and controlled to reap the potential benefits. In this context, this study recommends a novel Multi-objective Artificial Hummingbird Algorithm (MOAHA) based framework for optimal RDG allocation and sizing, along with BESS operation strategy, to enhance the voltage stability margin (VSM) and reduce the overall yearly expenses. In this work, the developed formulation has been evaluated on the IEEE 33-bus system, IEEE 69-bus system, and the Masirah Island distribution grid of Oman. Furthermore, the proposed method’s Pareto fronts are concluded to be superior to four of the recent metaheuristics employed in this research domain: Multi-objective Multiverse Optimization method (MOMVO), Multi-objective Equilibrium Optimization Technique (MOEOT), Multi-objective Particle Swarm Optimization (MOPSO), and Non-dominated Sorting Genetic Algorithm-III (NSGA-III). According to the findings, the MOAHA optimal Pareto solution candidates (PSC) for the three test systems satisfied the VSM constraints and cost objectives while providing substantial energy transfer during off-peak and peak demand hours. Additionally, all PSCs effectively avoided voltage violations, and the active power losses during each optimization period and the total energy losses were significantly reduced.

Evaluating Machine-Learning-Based Methods for Modeling a Digital Twin of Battery Systems Providing Frequency Regulation

Battery energy storage systems (BESSs) have the potential to become providers of frequency regulation services in future energy systems. In this case, the reliable operation of BESS has a significant impact on system stability. One of the tools that ensures the secure BESS operation is applying a digital twin to forecast the BESS state of charge (SOC). It allows to predict BESS behavior and identify potential failures or cyberattacks in BESS. In this article, we compare multiple data-driven approaches to forecast the SOC of a BESS based on realistic dataset and real battery operation. Recurrent neural networks, e.g., feedforward neural network, gated recurrent unit, long short-term memory, support vector regression, random forest, and AdaBoost methods are applied to evaluate each method's performance. We compare the methods based on the maximum and average forecast errors, the required computational capacity, as well as expected training speed. To validate the results, in addition to the data gathered from simulations, we used experimental setup with a BESS of 79 kWh providing containment reserve for normal operation, which is a BESS service with a high economical potential in Nordic Region. Furthermore, we provide recommendations for the methods that are suitable to be applied for modeling the digital twin of a utility-scale battery digital twin.

A bi-level optimization method for voltage control in distribution networks using batteries and smart inverters with high wind and photovoltaic penetrations

In electrical distribution systems, the voltage quality problem considers the most restrictive issue that hinders high photovoltaic (PV) and wind integration. Therefore, this study aims at providing a reliable control method for the voltage problem in distribution networks embedded with high PV and wind sources. The proposed voltage management strategy consists of two controlling stages. The first stage uses battery energy storage systems (BESS), while the second stage employs the smart PV inverters' reactive power injection capability. For BESS operation, a bi-level optimization method based on metaheuristic optimization algorithms (MOA) is developed to regulate the voltage levels by governing the batteries charging/discharging rates. The bi-level optimization problem aims to maximize PV and wind energy exploitation while improving the voltage profile. In this study, a detailed comparison is conducted between three MOA: Social Spider Optimization, Particle Swarm Optimization, and Cuckoo Search Optimization. In addition, considering the uncertainty associated with PV system generation, a PV generation forecast is embedded in the voltage control strategy to reinforce the decision-making process of BESS operation. The efficacy of the proposed method is deployed on a modified IEEE-34 bus test feeder with real-world load and PV and wind power generation data. Experimental results show the effectiveness of the proposed method and indicate that proper coordination between the BESS and smart PV inverters is beneficial for distribution system operations that seamlessly integrate PV and wind energy. Overall, the proposed voltage management strategy can be used to control the voltage to any desired range at different locations.

System and Market-Wide Impact Analysis of Coordinated Demand Response and Battery Storage Operation by a Load-Serving Entity

Because of electricity markets, environmental concerns, transmission constraints, and variable renewable energy sources (VRES), coordinated operation of demand response (DR) and battery energy storage systems (BESS) has become critical. In turn, the optimal coordinated operation of DR and BESS by an entity can affect overall electricity market outcomes and transmission network conditions. The coordinated operation is desirable for the profit-seeking entity, but it may adversely affect the cost and revenues of other market participants or cause system congestion. Though few coordinated operation models already exist, our aim in this research is to provide a novel multi-objective optimization-based methodology for the coordinated operation of DR and BESS to boost market profit. Moreover, another goal is to simultaneously study the combined effects of such coordinated models on transmission networks and electricity markets for the first time. This paper has proposed a new method for coordinated DR and BESS utilization by a load-serving entity (LSE) to increase its profit. Moreover, it has employed agent-based modeling of the electricity systems (AMES) for testing our coordinated DR and BESS method under day-ahead market and transmission system conditions. Simulation results of case studies indicate that the operating costs of all LSEs decreased, and there was as much as 98,260 $/day in cost savings for BESS deploying LSE1. Although revenues of cheaper generation companies (GenCos) decreased, those of expensive GenCos increased or showed mixed trends. For example, GenCo 3 exhibits an 8765 $/day decrease in revenue for 25% BESS capacity, whereas a 6328 $/day increase in revenue for 37.5% BESS capacity. The variance of LMPs, widely used as a risk index, greatly decreased for the LSE utilizing the coordinated methodology, somewhat decreased for other LSEs but increased for cheaper GenCos with no LSE at the local node. Since BESS deployment decisions of an LSE can have system-wide or market-wide consequences, simulation analysis before deployment can help reduce market distortions or system congestions.

Modeling and Control-Tuning of a Single-Stage MMC-Based BESS

In recent years, the integration of battery energy storage systems (BESSs) with multilevel modular converters (MMCs) has received interest in power system applications. In this work, this configuration is called a MMC-based BESS. The batteries are connected directly to the MMCs on submodules (SMs), called the single-stage approach. Several control strategies have been proposed to guarantee the proper operation of a MMC-based BESS. This system is complex due to the control strategy. Another challenge is in obtaining the controller gains for a MMC-based BESS converter. In this sense, there is a gap in the methodology used to calculate the controller gains. Thus, this work aimed to tune the analytical expressions of a MMC-based BESS by considering the single-stage approach. The methodology is validated through detailed simulation models of 10.9 MVA/5.76 MWh connected to a 13.8 kV power system. Finally, to validate the dynamics of the controllers, the simulation results in the PLECS software for the charging and discharging processes are presented.