Open Circulation Research Articles

Evaluation of heat supply with maintaining a safe mine water level during operation of open geothermal systems in post-coalmining areas

Purpose. Evaluation of the efficiency of open geothermal systems in flooded and drained mines of the Donetsk basin for heat supply of buildings with maintaining a safe mine water level. Methods. Both circulation and non-return geothermal systems for the mine water heat recovery are analyzed. We proposed the energy and cost criteria for evaluating the effectiveness of open geothermal systems based on a comparison of the produced thermal energy with the energy costs for its production. The criteria use the relationships of thermodynamics, hydraulics, analytical formulas for calculation of ground water flow and methods to calculate the heat demand of indoor spaces. Findings. The estimated ranges of thermal capacity from a few tens kW to a few MW and a coefficient of performance (COP) conversion factor of 3.5-6.8 achievable by geothermal systems for the studied closed mines of Donbas correlate well with the values of these indicators at open geothermal systems operated in different countries, which shows the technical and economic feasibility of the installation to cover local heat demands. The possibility to fully cover the needs for thermal energy is shown on the example of buildings with office spaces for staying of a few hundred people. We demonstrate how to preliminary calculate the parameters of mine water circulation with maintaining the safe level in terms of keeping the ground water quality in the areas adjacent to the mine. Originality. The developed criteria and calculation methodology allow to realistically evaluate the parameters of the efficiency of operation for open non-return and circulation geothermal systems, taking into account mining, geological and technology conditions, to prioritize the exploration of geothermal resources in mines and to evaluate the parameters of mine water circulation with maintaining the safe mine water level. Practical implications. The study showed the feasibility of installation and effective operation of open geothermal systems at the mines of the Donetsk basin for heat supply of buildings located in the adjacent areas with maintaining a safe mine water level.

Sandstone reservoir quality in light of depositional and diagenetic processes of the Messinian Qawasim Formation, onshore Nile Delta, Egypt

• Sandstone in the upper part of the Qawasim Formation is the main reservoir in the El Tamad field. • Primarily, the sandstone is arenite in composition, well sorted with sub-rounded to rounded grains. • Diagenesis enhanced the reservoir quality of the sandstone with low-cement content, poor compaction and weak fracturing. • Clastic rocks of the Qawasim Formation were deposited in a shelf environment as stacked barrier-island bars. • Carbonate rocks of the Qawasim Formation were deposited in a shelf lagoon with open circulation. The Nile Delta region is the main gas-producing province in Egypt. Late Miocene sediments are the target of drilling in the onshore Nile Delta where it has the potentiality to store and produce hydrocarbons. Five wells of the Messinian Qawasim Formation at El Tamad Field were selected for the present study. Detailed petrographic investigations were carried out to reveal the depositional and diagenetic features of the Qawasim Formation rock units. Two main facies were distinguished in the studied formation: clastic and carbonate facies. The clastic rocks include conglomerate, sandstone and shale, while the carbonate rocks include limestone and dolostone. Depositional, diagenetic and petrophysical parameters of the sandstones of the Qawasim Formation reflect that this rock unit an excellent reservoir for hydrocarbon. These microfacies display depositional features such as well sorting, open packing and poor cementation in both coarse and fine-grained microfacies. The porosity of sandstone was enhanced by diagenetic processes such as dolomitization of calcite cement and low compaction that resulted in grain cracking, while the dissolution of feldspars had a subordinate impact on increasing porosity due to their low abundance and the resultant authigenic clay minerals.

Measuring the high life: A method for assessing apartment design policy implementation

This paper introduces a comprehensive method to measure the implementation of residential apartment design policies in Australia. It describes a protocol for extracting and measuring potentially health-enhancing policy-specific design requirements derived from three current residential apartment design policies in Sydney, Melbourne and Perth. These requirements focus on ten key design elements: (1) solar access, (2) natural ventilation, (3) private open space, (4) communal open space, (5) circulation spaces, (6) acoustic privacy, (7) outlook and (8) visual privacy, (9) bicycle and car parking and (10) apartment mix. This paper also describes the computation of scores to quantify the levels of on-ground implementation of the design requirements and compliance with the policies. The method will allow researchers to objectively quantify, benchmark and assess the uptake of apartment policy in apartment design and construction to inform future policy development.• Measurements were developed to systematically assess apartment buildings for their implementation of specific design requirements stipulated by State Government design policies.• Policy implementation was defined as the degree to which the apartment buildings adhered to the requirements outlined by the apartment design policies. A scoring system was developed to quantify policy implementation at both the apartment and building levels.• This method can be replicated to allow researchers to objectively quantify, benchmark and assess the uptake of apartment policy in apartment design and construction to inform future policy development.

Valorization of Biomass Residues by Biosorption of Microelements in a Closed-Loop Cycle

The concept of the research data presented assumes the valorization of goldenrod residues from supercritical CO2 extraction following the circular economy principles. The biomass was enriched with microelements (Cr, Zn, Cu) by biosorption from single and multielemental solutions in batch and packed bed reactors. Modeling of biosorption equilibrium supported by instrumental analysis (SEM and FTIR) of material properties was employed to explain the metal ions binding mechanism. The preferential biosorption of Cr(III) over the divalent ions, allows the possibility of valorization of goldenrod residue in a garden-scale biosorption tank acting as a fixed-bed reactor working in an open circulation run and fed with microelements diluted in rainwater. The use of fertigation solution in optimal doses of micronutrients did not show any phytotoxic effect. Using the post-sorptive solution as a source of micronutrients for plants showed significant effects on growth parameters (increased chlorophyll content by 54%) compared to groups fertilized with commercial formulation (13% higher sprout mass). Additionally, fertigation with the post-sorption solution leads to the biofortification of cucumber sprouts. The recycling process results in two products: enriched biomass as a potential feed additive (with Cr(III), Cu(II), and Zn(II)) and a post-sorption solution (with Zn(II) and Cu(II) only) used in the fertigation of plants.Graphical

Are eSports more than just sitting? A study comparing energy expenditure

Aim: To investigate the energy expenditure of amateur eSport athletes between sitting and aneSport gaming session. Materials & methods: Eleven amateur male eSport athletes (age: 21.73±3.50years, weight: 76.00±12.51kg, height: 1.81±0.06m) were included. After recording the resting values, eSports playing values were recorded using an open circulation oxygen consumption analyzer (QuarkCPET, COSMED, Albano Laziale, Italy). Also, action per min(APM) scores were recorded. Results: When comparing the respiratory frequency, metabolic equivalent of task values and energy expenditure values of the participants, asignificant increase was observed in all three values (p<0.05 for each). Conclusion: eSports players, who are considered to be physically inactive by sitting, spend approximately 40% more energy than sitting, even at theamateur level. According to APM, more energy can be spent in tournaments and at the elite level.

Experiment investigation on flow characteristics of open natural circulation system

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

Influence of power step on the behavior of an Open Natural Circulation Loop as applied to a Parabolic Trough Collector

This paper investigates the dynamic behaviour of a low pressure open natural circulation loop applied to a parabolic trough collector. An in-house experimental setup is developed to perform the test. The experiments are performed on two distinct modes: H-mode and S-mode, corresponding to single-phase and two-phase flow. Three distinct power amplitude modes viz, 250, 325, and 464.3 W with a power step number of 24, 18 and 12 having a duration of 15, 20 and 30 min are considered. A Fast Fourier Transform analysis revealed that the flow in the loops is stable with a maximum decay ratio of 0.726. Instabilities, including Density Wave Oscillation, geysering and flashing, are observed during the test. Moreover, the thermal inertia of the loop has a significant role in the initial stage of power steps. An increase in the power step size conferred a 9.1%–33.4% increase in the outlet temperature of water in H-mode. In S-mode, an increase in power step size delayed the onset of boiling and reduced the duration of boiling by 2.8–14.32% and 8.03–22.02%. The loop can generate a mass flux of 40–42.5 kgm2s−1 in H-mode and up to 400 kgm2s−1 in S-mode, which is significant.

Experimental investigation on performance of a light weight solar receiver of a parabolic dish concentrator

The need to extract maximum energy from renewable resources has become quite significant in day-to-day life. Solar energy is an essential source to meet the ever-increasing demand for energy today and the potential ways are to use efficient solar dish concentrators. In the present work, an external type solar receiver in the form of spiral tube is developed with mild steel material and tested with Scheffler type parabolic dish concentrator. The experimental performance analysis is performed in the real atmospheric conditions and the energy efficiency of the receiver in open loop circulation mode is studied for a whole day. Water is used as the heat transferring fluid with 2 LPM as the flow rate. The receiver showed an average thermal energy efficiency of 43.7% with a peak value of 47% during a sunny day with average beam radiation of 743 W/m2 for a HTF flow rate of 2 LPM. The result shows that this receiver has potential to be used in the solar powered process heating application in the temperature range 30°C to 100°C.

Experimental study on transient thermal–hydraulic characteristics of an open natural circulation for the passive containment cooling system

Nuclear safety has attracted increasing global attention. Passive Containment Cooling System (PCCS) is one of the several passive safety systems designed to ensure the safety of nuclear power plants (NPPs). A large-scale test facility was built to simulate the PCCS for understanding the thermal–hydraulic characteristics with operating conditions in the start-up process. Parameter analysis is carried out to reveal the influences of various parameters on the thermal–hydraulic characteristics. Results show that the transient-state performance of the PCCS strongly depends on the initial containment pressure and air mass fraction. The air mass fraction has a greater effect on the transient heat transfer process. Meanwhile, the effect of cooling water temperature on the transient characteristics can be ignored. The response time, which is defined to characteristic the heat transfer ability of PCCS, is proposed. In addition, a non-dimensional empirical correlation for response time is developed to reveal the relationship between the heat transfer capacity of the natural circulation and forced circulation, while the deviation mostly within ±20%. Studies on the relevant physical processes or phenomena are helpful for the safety analysis or accident study related with PCCS.

DESIGN, FABRICATION AND TESTING OF A LAB-SCALE HYBRID MOBILE COOLING SYSTEM FOR OYSTER INDUSTRY

Cooling system is critical to maintain freshness of oysters and avoid contamination by bacteria. However, there is no persistent and efficient temperature control mechanism for cooling and storing of oysters in its supply chain from oyster farmer to the end consumers (e.g., market, restaurants). The aim of this project is to design, fabricate, and evaluate a lab-scale hybrid mobile cooling system for oyster aquaculture. This innovative hybrid cooling system integrated 110 volts AC cooling unit and 12 volts DC cooling unit with six individual chambers. These special features it to work under different power source. Even after power off, it can still run for several hours with battery (i.e., outage). So, it can be moved from boat to customers without change the storage condition of oysters. Six individual chambers have a potential to reduce energy loss and improve cooling performance because removing oyster baskets from one chamber will not affect temperatures in the other chambers. In this study, cooling system was fabricated in the laboratory based on the 2D design and 3D model. The performance of this cooling system was tested under various air circulation conditions (e.g., no vent open, two vents open, two vents open and air circulation fan on). Both cooling speed and the stand deviation of chamber temperature were used to evaluate the system cooling performance. Results indicated that the additional of air fan and two open vents in the divider has better cooling performance than the other two operating conditions. Hybrid cooling system with two vents and air circulation fan on can effectively cool down the oyster temperature from 21.1 o C to 5.6 o C within three hours. The stand deviation of the temperatures in six individual chambers can be reduced to 0.83 o C in four hours.

Typology of Skybridges in Asia

With the rapid development of high-density urban areas and the construction of high-rise complexes, the number of skybridges has increased during the last 20 years. While skybridges in high-rise building complexes have been attracting considerable attention, a few studies have been conducted on state-of-the-art skybridges, but not enough typological research on skybridges has been made based on actual cases. In this study, the typological difference among skybridges sharing common properties was verified using a statistical method based on the cases of skybridges in Asia. The completion year, length, width, and relative elevation of skybridges were used for the statistical analysis. Based on the results, six skybridge types, i.e., open circulation, open sky park, open programmatic, enclosed rooftop programmatic, enclosed circulation, and enclosed programmatic, and their characteristics were derived and described by a three-dimensional plot. This study provides a comprehensive understanding of skybridges, and it can be used as a reference material for researchers to understand how high-rise complexes with skybridges will evolve and change their urban environment. It will also help architects to design skybridges and communicate with clients and the public on their value.

Molecular-structural homology of proteolytic enzymеs in the studying of proteolysis mechanism and its regulation

The actual problem of experimental medicine is the substantiation of new model organisms that meet modern requirements of bioethics, cost and conditions of detention. The aim of this work was a comparative analysis of the homology degree of proteolytic enzymes in humans and pulmonary freshwater mollusks. The homology of enzymes in nucleotide sequences in humans and pulmonary freshwater mollusks in the analysis of unregulated proteolysis is 66–68 %; regulated proteolysis – 69–76 %; ubiquitin-like modifiers – 78–83 %; extracellular enzymes – 67–76 %; and intracellular enzymes – 65–72 %. The evolutionary conservatism of proteolytic enzymes and the presence of an open blood circulation, which allows the substances under study to be delivered from the hemolymph directly to target cells, make it possible to use these animals as cheap and convenient test organisms. The practical importance of a sufficiently high homology degree of proteolytic enzymes in humans and pulmonary freshwater mollusks justifies the expediency of forming mollusk aquaculture to obtain proteolytic enzyme protein preparations from their tissues within the framework of the tasks of biopharmaceuticals, cosmetics and the food industry.

Mineralogy and geochemistry of the Late Triassic Baluti Formation, Northern Iraq

The petrography and geochemistry of clastic rocks collected from two sections from the Baluti Formation northern Iraq, have been investigated to infer the depositional environment of the Late Triassic Baluti Formation. Petrographic study of the carbonate unit shows that they consist mainly of heterogeneous poorly sorted grainstones and packstones, ooids, intraclasts, peloids, bioclasts and green algae (Halimeda). The abundant and heterogeneous size of these constituents suggests a subtidal lagoon/oolitic shoal depositional environment with an open marine water circulation. Trace element concentrations of the shales and marlstones reveal a wide difference in the depositional environment. The paleoclimate proxies (C-value, Sr/Cu, Rb/Sr, Ga/Rb, and Sr/Ba ratios) and presence of illite suggest a hot and arid to semiarid climates during the deposition of the Buluti sediments, which coincide with the Late Triassic global warming. The combined use of the Cd/Mo and Co*Mn proxies indicate the deposition mainly in open marine settings on the continental margin associated with upwelling and subordinate restricted marine settings. Trace element redox proxies (V/(V + Ni), Th/U, V/Cr, Ni/Co, and V/Ni ratios indicates anoxic to dysoxic to marginally oxic marine conditions. This difference in paleoredox conditions is likely to arise from the variation in the hydrographic conditions of the depositional basin including water depth, upwelling oxidation degree in the water column and salinity.

Cambrian (Series 2 to Miaolingian) platform facies from central Sonora, Mexico and the regional correlation

This study provides new insights about depositional paleoenvironments through siliciclastic microfacies, carbonate microfacies, and biofacies analysis from sedimentary formations of the lower and middle Cambrian (Stage 4–Wuliuan), exposed in central Sonora, northern Mexico. Results of the petrographic analysis of 48 samples revealed the following lithologies: quartzarenite, oncolytic rudstone, grainstone-packstone, wackestone, mudstone, and to a lesser extent sandy limestone. Two siliciclastic microfacies were identified: (A) quartzarenite with cross-bedded and horizontal stratification deposited in an intertidal and supratidal environment; and (B) massive quartzarenite with Skolithos ichnofacies deposited in subtidal and intertidal environments. Four carbonate microfacies were identified: microfacies 1 is a sandy limestone with trilobite fragments; microfacies 2 is a grainstone with intraclasts, salterellids, hyolithids, trilobites, and echinoderms plates; microfacies 3 is an oncolytic rudstone consisting of microbes and abundant echinoderms plates; and microfacies 4 is a packstone-grainstone with abundant ooids, trilobite fragments, and echinoderm plates. Two biofacies were identified: Agnostid-polymeroid biofacies with predominance of the trilobites Pentagnostus, Bathyuriscus, Oryctocephalites, and Elrathina; and Pagetia biofacies with abundant trilobites of the genera Pentagnostus, Pagetia and Elrathina. It is concluded by the sedimentation model that changes in sea level is the most important parameter in determining the siliciclastic microfacies, carbonate microfacies and biofacies; as well as the depositional environments that vary from the coastline (subtidal to supratidal) to shallow-water open circulation marine platform with low and high energy waters. The Cambrian deposits of northern Mexico are correlated with the deposits of California and Nevada (USA), as well as to the Precordillera (Argentina), where the species in common show a strong affinity.

Depositional environment of Eocene oil shales of Wadi Shallala Formation from northern Jordan

Oil shale deposits of the mid-Eocene Wadi Shallala Formation in northern Jordan consist of organic-rich limestones and chalks. These organic-rich deposits are exposed at the surface near Wadi Ash Shajara, in a 12-m-thick outcrop. For this study, a total of 21 oil shale samples were analysed for bulk elemental geochemistry, inorganic geochemistry, organic geochemistry and microfacies analysis. Three microfacies types were recognised: pelagic mudstone/wackestone, foraminiferal packstone and bioclastic packstone/wackestone. The observed cyclicity of these microfacies in the study area indicates fluctuations in depositional conditions in Neo-Tethys during the mid-Eocene. A shallow-water, calm, restricted marine environment with limited water circulation and low energy currents evolved into a deeper-water environment with open circulation at or just below the wave base. Wadi Shallala Formation in Wadi Ash Shajara composes mainly of chalk (CaCO3 = ~92 wt%) with a TOC of up to 5 wt % and comprises abundant calcareous nannofossils, foraminifera and ostracods as well as non-clastic components like calcitic fragments. The sulphur content of the analysed samples is significant (1.24 wt %) and is associated with the organic matter. Redox-sensitive elements (Fe, Ni, Zn, S and Zr) are enriched in the oil shale samples, indicating an anoxic depositional environment fluctuating between euxinic and sub-euxinic. These fluctuations in depositional conditions of the basin are a result of many factors such as climate, and tectonisms affected deposition of oil shales during Middle Eocene time.

Оценка влияния пандемии COVID-19 на экономики Китая и России

The COVID-19 pandemic has significantly affected economic development in countries around the world. It aggravated existing problems and increased the demand for economic transformation, modernization and qualitative development, triggered a new technological reform, which led to the emergence of new economic business forms and new consumption. The article assesses the impact of the COVID-19 pandemic on the economies of China and Russia. To achieve this goal, we review the state of business activity in the manufacturing and non-manufacturing sectors of the national economy, and summarize the main measures of the anti-pandemic policy implemented by the Chinese and Russian governments. We look into the dynamics of functioning of offline economic spheres that are aimed at personal communication (tourism, catering, retail, transport, culture, entertainment), as well as online spheres implying human-computer interaction (electronic retailing, express delivery, remote work, telemedicine) in the context of the COVID-19 pandemic. We make conclude that the extent of COVID-19 impact on the economy depends on the effectiveness of measures for its prevention and control. We are convinced that at the moment it is necessary to correlate these measures with economic and social development policies, and take into consideration increased consumption as an important aspect of mitigating the effects of COVID-19, accelerate the transformation and modernization of traditional industries, actively develop new economic business forms and build a more open monetary circulation both within the country and globally, thus enhancing the role of the state in global supply chains.

Application of Fracture Barrier Analysis in Well Stimulation Planning for Upper Baturaja Limestone Formation Based on Well Log &amp; Drill Cutting Data from OBF-01 and OBF-04 Wells, Offshore Southeast Sumatra

In general, the South Sumatra Regional Stratigraphy of the Baturaja Limestone Formation facies is deposited on the Buildup Carbonate (Reef) and the Limestone Clastic Carbonate of the Baturaja Formation which grows as a buildup reef on the platform in the Basement High (Horst) underneath is the Lemat Formation volcanic deposits. Referring to the facies model in general, the Baturaja Limestone Formation, the depositional environment starts from Shelf Lagoon Open Circulation - Winnowed Edge Sand - Organic Buildup - Fore Slope - Deep Shelf Margin - Open Sea Shelf - Basin, meaning that carbonate is formed starting from pure organic Cabonate Buildup Reef without / a little sludge / mud to the Carbonate Basin where more muddy / mud is present, this condition causes clay minerals to also more and more mix with Terigenous Clastics (Quartz, feldpar). The complexity of the Baturaja Limestone Formation requires fracture barrier analysis associated with well stimulation planning in order to increase oil productivity with the appropriate method. Fracture barrier fracture analysis is an approach method to determine the depth interval that becomes a barrier in hydraulic fracturing by correlating the results of geomechanical analysis from well log data and mineralogical analysis from drill cuttings data, so that a commonly used well stimulation method can be selected, namely hydraulic fracturing, acidizing, and acid-fracturing.From the ternary diagram plot the XRD (bulk) analysis results show that the distribution of the main minerals (Quartz, Clay, Calcite) is more dominant in the ductile zone, hard to frac category. This shows that all the depth intervals in the OBF-01 and OBF-04 wells are more ductile, and are not recommended for hydraulic fracturing. From the XRD (bulk) analysis, Calcite mineral is more dominant, so for well stimulation work it is recommended to use acidizing or acid-fracturing.

William Harvey reinterpreted in the light of species evolution (I) - How and why circulation phylogenesis integrates itself within species evolution

In this first part we describe the different steps of the evolution of species and the circulatory modifications, which accompany it. From the open circulation in invertebrates, via the in-series closed circulation in fish, to the in-parallel closed circulation in mammals, the local ability to vasodilate in relation to the specific metabolic demand of territorial activity was the driving force for circulatory evolution. This capacity was achieved by the progressive muscularization of small arteries, generating frictional forces, which systemically determine high arterial pressure, and locally determine active vasodilation via the inhibition of vasomotor tone. This determinism differentially impacts the small resistance arteries, which generate blood pressure, and the large conductance arteries, which support the tensional stress generated by the blood pressure.

A study on the steady-state flow behavior of the flashing-driven open natural circulation system

The steady-state flow behavior serves as an important indicator of a natural circulation system, since it directly reflects the flow and heat transfer capacity of the system. Many studies have been conducted into the steady-state behavior of high-pressure natural circulation, while a few have focused on the open natural circulation. The steady-state flow behavior of the open natural circulation is however more complex due to its low-pressure property, which increases the likelihood of flashing. The position of flashing front and the distribution of void fraction in the riser are never fixed. Furthermore, due to the nonlinear characteristic of flashing and nonzero integral result of accelerated pressure drop along the loop direction, it is difficult to obtain an accurate mathematical expression of the relationship between flowrate and heating rate by using the integral of momentum conservation equations. Therefore, relevant theoretical formulations are inadequate and unavailable. In this paper, a theoretical formula to determine the steady-state flow behavior of a flashing-driven natural circulation system was derived by using a quasi-linear flashing mode and a special formula processing of accelerated pressure drop integral result. The prediction results of the formula were validated by experimental data. Furthermore, the influence of geometric and thermal-hydraulic parameters on the steady-state flow behavior was studied through calculation and validated by experimental data. This paper aims at providing technical support for the design of open natural circulation systems.

Configuration Optimization of Ultrasonic Descaling Device for Condenser Based on Solidworks-Fluent

As a key component of the open circulation cooling system, the condenser of the power plant is very prone to fouling. After the condenser cooling pipe is scaled, the heat transfer resistance increases, which reduces the heat transfer coefficient and heat exchange efficiency of the heat exchange equipment, which is not conducive to improving the energy efficiency. Therefore, the research on condenser descaling technology has attracted widespread attention. Ultrasonic descaling is a new type of online descaling technology. Its application effect in descaling of condensers in power plants has been verified by actual engineering, but it lacks optimization of the arrangement and configuration of ultrasonic devices. In order to explore the influence of various ultrasonic parameters on the descaling effect, this paper builds a 3D geometric model of the condenser in Solidworks based on the relevant structural parameters of the N-20910 condenser, meshing the model reasonably and setting the boundary conditions. Then, in Fluent, the descaling effect is characterized by the pressure change curve of the specific position of the fluid in the condenser pipe. By setting three different ultrasonic inlet modes and different ultrasonic sound pressure functions, the effects of the quantity, power, frequency and distribution of ultrasonic descaler on the internal flow field and descaling effect of the condenser are compared and analyzed. The simulation results can provide effective help for the optimization and parameter setting of the ultrasonic descaling device of the power plant condenser.