Online Brain-computer Interface Research Articles

Comprehensive evaluation methods for translating BCI into practical applications: usability, user satisfaction and usage of online BCI systems.

Although brain-computer interface (BCI) is considered a revolutionary advancement in human-computer interaction and has achieved significant progress, a considerable gap remains between the current technological capabilities and their practical applications. To promote the translation of BCI into practical applications, the gold standard for online evaluation for classification algorithms of BCI has been proposed in some studies. However, few studies have proposed a more comprehensive evaluation method for the entire online BCI system, and it has not yet received sufficient attention from the BCI research and development community. Therefore, the qualitative leap from analyzing and modeling for offline BCI data to the construction of online BCI systems and optimizing their performance is elaborated, and then user-centred is emphasized, and then the comprehensive evaluation methods for translating BCI into practical applications are detailed and reviewed in the article, including the evaluation of the usability (including effectiveness and efficiency of systems), the evaluation of the user satisfaction (including BCI-related aspects, etc.), and the evaluation of the usage (including the match between the system and user, etc.) of online BCI systems. Finally, the challenges faced in the evaluation of the usability and user satisfaction of online BCI systems, the efficacy of online BCI systems, and the integration of BCI and artificial intelligence (AI) and/or virtual reality (VR) and other technologies to enhance the intelligence and user experience of the system are discussed. It is expected that the evaluation methods for online BCI systems elaborated in this review will promote the translation of BCI into practical applications.

Multimodal brain-controlled system for rehabilitation training: Combining asynchronous online brain–computer interface and exoskeleton

Background:Traditional therapist-based rehabilitation training for patients with movement impairment is laborious and expensive. In order to reduce the cost and improve the treatment effect of rehabilitation, many methods based on human–computer interaction (HCI) technology have been proposed, such as robot-assisted therapy and functional electrical stimulation (FES). However, due to the lack of active participation of brain, these methods have limited effects on the promotion of damaged nerve remodeling. New method:Based on the neurofeedback training provided by the combination of brain–computer interface (BCI) and exoskeleton, this paper proposes a multimodal brain-controlled active rehabilitation system to help improve limb function. The joint control mode of steady-state visual evoked potential (SSVEP) and motor imagery (MI) is adopted to achieve self-paced control and thus maximize the degree of brain involvement, and a requirement selection function based on SSVEP design is added to facilitate communication with aphasia patients. Comparison with existing methods:In addition, the Transformer is introduced as the MI decoder in the asynchronous online BCI to improve the global perception of electroencephalogram (EEG) signals and maintain the sensitivity and efficiency of the system. Results:In two multi-task online experiments for left hand, right hand, foot and idle states, subject achieves 91.25% and 92.50% best accuracy, respectively. Conclusion:Compared with previous studies, this paper aims to establish a high-performance and low-latency brain-controlled rehabilitation system, and provide an independent and autonomous control mode of the brain, so as to improve the effect of neural remodeling. The performance of the proposed method is evaluated through offline and online experiments.

Combining detrended cross-correlation analysis with Riemannian geometry-based classification for improved brain-computer interface performance.

Riemannian geometry-based classification (RGBC) gained popularity in the field of brain-computer interfaces (BCIs) lately, due to its ability to deal with non-stationarities arising in electroencephalography (EEG) data. Domain adaptation, however, is most often performed on sample covariance matrices (SCMs) obtained from EEG data, and thus might not fully account for components affecting covariance estimation itself, such as regional trends. Detrended cross-correlation analysis (DCCA) can be utilized to estimate the covariance structure of such signals, yet it is computationally expensive in its original form. A recently proposed online implementation of DCCA, however, allows for its fast computation and thus makes it possible to employ DCCA in real-time applications. In this study we propose to replace the SCM with the DCCA matrix as input to RGBC and assess its effect on offline and online BCI performance. First we evaluated the proposed decoding pipeline offline on previously recorded EEG data from 18 individuals performing left and right hand motor imagery (MI), and benchmarked it against vanilla RGBC and popular MI-detection approaches. Subsequently, we recruited eight participants (with previous BCI experience) who operated an MI-based BCI (MI-BCI) online using the DCCA-enhanced Riemannian decoder. Finally, we tested the proposed method on a public, multi-class MI-BCI dataset. During offline evaluations the DCCA-based decoder consistently and significantly outperformed the other approaches. Online evaluation confirmed that the DCCA matrix could be computed in real-time even for 22-channel EEG, as well as subjects could control the MI-BCI with high command delivery (normalized Cohen's κ: 0.7409 ± 0.1515) and sample-wise MI detection (normalized Cohen's κ: 0.5200 ± 0.1610). Post-hoc analysis indicated characteristic connectivity patterns under both MI conditions, with stronger connectivity in the hemisphere contralateral to the MI task. Additionally, fractal scaling exponent of neural activity was found increased in the contralateral compared to the ipsilateral motor cortices (C4 and C3 for left and right MI, respectively) in both classes. Combining DCCA with Riemannian geometry-based decoding yields a robust and effective decoder, that not only improves upon the SCM-based approach but can also provide relevant information on the neurophysiological processes behind MI.

Online BCI systems: cross-subject motor imagery classification based on weighted time-domain feature extraction methods

Motor imagery electroencephalogram (MI-EEG) is becoming increasingly important. This paper solves the problem of online signal recognition for motor imagery across subjects by finding common features across multiple subjects to improve the generality of the classification model. We analysed the EEG data from left/right-hand motor imagery of eight subjects and proposed a weighted time-domain (WTD) feature extraction method based on a weighted channel screening method. The classification model constructed by combining this feature extraction method with the support vector machine (SVM) classification method was faster in classification and achieved good cross-subject classification accuracy (The average offline classification accuracy was 91.39%). In this paper, an online control system for asynchronous brain-controlled wheelchairs was built with good performance. The online average motor imagery classification accuracy was 81.67%, and the average response time was 1.36s. This method contributes to bringing the online Brain-computer interface (BCI) system out of the laboratory and into wider application.

A comprehensive dataset for home appliance control using ERP-based BCIs with the application of inter-subject transfer learning.

Brain-computer interfaces (BCIs) have a potential to revolutionize human-computer interaction by enabling direct links between the brain and computer systems. Recent studies are increasingly focusing on practical applications of BCIs-e.g., home appliance control just by thoughts. One of the non-invasive BCIs using electroencephalography (EEG) capitalizes on event-related potentials (ERPs) in response to target stimuli and have shown promise in controlling home appliance. In this paper, we present a comprehensive dataset of online ERP-based BCIs for controlling various home appliances in diverse stimulus presentation environments. We collected online BCI data from a total of 84 subjects among whom 60 subjects controlled three types of appliances (TV: 30, door lock: 15, and electric light: 15) with 4 functions per appliance, 14 subjects controlled a Bluetooth speaker with 6 functions via an LCD monitor, and 10 subjects controlled air conditioner with 4 functions via augmented reality (AR). Using the dataset, we aimed to address the issue of inter-subject variability in ERPs by employing the transfer learning in two different approaches. The first approach, "within-paradigm transfer learning," aimed to generalize the model within the same paradigm of stimulus presentation. The second approach, "cross-paradigm transfer learning," involved extending the model from a 4-class LCD environment to different paradigms. The results demonstrated that transfer learning can effectively enhance the generalizability of BCIs based on ERP across different subjects and environments.

Transfer learning promotes acquisition of individual BCI skills.

Subject training is crucial for acquiring brain-computer interface (BCI) control. Typically, this requires collecting user-specific calibration data due to high inter-subject neural variability that limits the usability of generic decoders. However, calibration is cumbersome and may produce inadequate data for building decoders, especially with naïve subjects. Here, we show that a decoder trained on the data of a single expert is readily transferrable to inexperienced users via domain adaptation techniques allowing calibration-free BCI training. We introduce two real-time frameworks, (i) Generic Recentering (GR) through unsupervised adaptation and (ii) Personally Assisted Recentering (PAR) that extends GR by employing supervised recalibration of the decoder parameters. We evaluated our frameworks on 18 healthy naïve subjects over five online sessions, who operated a customary synchronous bar task with continuous feedback and a more challenging car racing game with asynchronous control and discrete feedback. We show that along with improved task-oriented BCI performance in both tasks, our frameworks promoted subjects' ability to acquire individual BCI skills, as the initial neurophysiological control features of an expert subject evolved and became subject specific. Furthermore, those features were task-specific and were learned in parallel as participants practiced the two tasks in every session. Contrary to previous findings implying that supervised methods lead to improved online BCI control, we observed that longitudinal training coupled with unsupervised domain matching (GR) achieved similar performance to supervised recalibration (PAR). Therefore, our presented frameworks facilitate calibration-free BCIs and have immediate implications for broader populations-such as patients with neurological pathologies-who might struggle to provide suitable initial calibration data.

The challenge of controlling an auditory BCI in the case of severe motor disability

BackgroundThe locked-in syndrome (LIS), due to a lesion in the pons, impedes communication. This situation can also be met after some severe brain injury or in advanced Amyotrophic Lateral Sclerosis (ALS). In the most severe condition, the persons cannot communicate at all because of a complete oculomotor paralysis (Complete LIS or CLIS). This even prevents the detection of consciousness. Some studies suggest that auditory brain–computer interface (BCI) could restore a communication through a « yes–no» code.MethodsWe developed an auditory EEG-based interface which makes use of voluntary modulations of attention, to restore a yes–no communication code in non-responding persons. This binary BCI uses repeated speech sounds (alternating “yes” on the right ear and “no” on the left ear) corresponding to either frequent (short) or rare (long) stimuli. Users are instructed to pay attention to the relevant stimuli only. We tested this BCI with 18 healthy subjects, and 7 people with severe motor disability (3 “classical” persons with locked-in syndrome and 4 persons with ALS).ResultsWe report online BCI performance and offline event-related potential analysis. On average in healthy subjects, online BCI accuracy reached 86% based on 50 questions. Only one out of 18 subjects could not perform above chance level. Ten subjects had an accuracy above 90%. However, most patients could not produce online performance above chance level, except for two people with ALS who obtained 100% accuracy. We report individual event-related potentials and their modulation by attention. In addition to the classical P3b, we observed a signature of sustained attention on responses to frequent sounds, but in healthy subjects and patients with good BCI control only.ConclusionsAuditory BCI can be very well controlled by healthy subjects, but it is not a guarantee that it can be readily used by the target population of persons in LIS or CLIS. A conclusion that is supported by a few previous findings in BCI and should now trigger research to assess the reasons of such a gap in order to propose new and efficient solutions.Clinical trial registrations: No. NCT02567201 (2015) and NCT03233282 (2013).

Methods for motion artifact reduction in online brain-computer interface experiments: a systematic review.

Brain-computer interfaces (BCIs) have emerged as a promising technology for enhancing communication between the human brain and external devices. Electroencephalography (EEG) is particularly promising in this regard because it has high temporal resolution and can be easily worn on the head in everyday life. However, motion artifacts caused by muscle activity, fasciculation, cable swings, or magnetic induction pose significant challenges in real-world BCI applications. In this paper, we present a systematic review of methods for motion artifact reduction in online BCI experiments. Using the PRISMA filter method, we conducted a comprehensive literature search on PubMed, focusing on open access publications from 1966 to 2022. We evaluated 2,333 publications based on predefined filtering rules to identify existing methods and pipelines for motion artifact reduction in EEG data. We present a lookup table of all papers that passed the defined filters, all used methods, and pipelines and compare their overall performance and suitability for online BCI experiments. We summarize suitable methods, algorithms, and concepts for motion artifact reduction in online BCI applications, highlight potential research gaps, and discuss existing community consensus. This review aims to provide a comprehensive overview of the current state of the field and guide researchers in selecting appropriate methods for motion artifact reduction in online BCI experiments.

A sub-region combination scheme for spatial coding in a high-frequency SSVEP-based BCI

Objective. In studying the spatial coding mechanism of visual evoked potentials, it is significant to construct a model that shows the relationship between steady-state visual evoked potential (SSVEP) responses to the local and global visual field stimulation. In order to investigate whether SSVEPs produced by sub-region stimulation can predict that produced by joint region stimulation, a sub-region combination scheme for spatial coding in a high-frequency SSVEP-based brain-computer interface (BCI) is developed innovatively. Approach. An annular visual field is divided equally into eight sub-regions. The 60 Hz visual stimuli in different sub-regions and joint regions are presented separately to participants. The SSVEP produced by the sub-region stimulation is superimposed to simulate the SSVEP produced by the joint region stimulation with different spatial combinations. A four-class spatially-coded BCI paradigm is used to evaluate the simulated classification performance, and the performance ranking of all simulated SSVEPs is obtained. Six representative stimulus patterns from two performance levels and three stimulus areas are applied to the online BCI system for each participant. Main results. The experimental result shows that the proposed scheme can implement a spatially-coded visual BCI system and realize satisfactory performance with imperceptible flicker. Offline analysis indicates that the classification accuracy and information transfer rate (ITR) are 89.69 ± 8.75% and 24.35 ± 7.09 bits min−1 with 3 s data length under the 3/8 stimulus area. The online BCI system reaches an average classification accuracy of 87.50 ± 9.13% with 3 s data length, resulting in an ITR of 22.48 ± 6.71 bits min−1 under the 3/8 stimulus area. Significance. This study proves the feasibility of using the sub-region’s response to predict the joint region’s response. It has the potential to extend to other frequency bands and lays a foundation for future research on more complex spatial coding methods.

An open-source human-in-the-loop BCI research framework: method and design.

Brain-computer interfaces (BCIs) translate brain activity into digital commands for interaction with the physical world. The technology has great potential in several applied areas, ranging from medical applications to entertainment industry, and creates new conditions for basic research in cognitive neuroscience. The BCIs of today, however, offer only crude online classification of the user's current state of mind, and more sophisticated decoding of mental states depends on time-consuming offline data analysis. The present paper addresses this limitation directly by leveraging a set of improvements to the analytical pipeline to pave the way for the next generation of online BCIs. Specifically, we introduce an open-source research framework that features a modular and customizable hardware-independent design. This framework facilitates human-in-the-loop (HIL) model training and retraining, real-time stimulus control, and enables transfer learning and cloud computing for the online classification of electroencephalography (EEG) data. Stimuli for the subject and diagnostics for the researcher are shown on separate displays using web browser technologies. Messages are sent using the Lab Streaming Layer standard and websockets. Real-time signal processing and classification, as well as training of machine learning models, is facilitated by the open-source Python package Timeflux. The framework runs on Linux, MacOS, and Windows. While online analysis is the main target of the BCI-HIL framework, offline analysis of the EEG data can be performed with Python, MATLAB, and Julia through packages like MNE, EEGLAB, or FieldTrip. The paper describes and discusses desirable properties of a human-in-the-loop BCI research platform. The BCI-HIL framework is released under MIT license with examples at: bci.lu.se/bci-hil (or at: github.com/bci-hil/bci-hil).

The use of the general thermal sensation discriminant model based on CNN for room temperature regulation by online brain-computer interface

Brain-computer interface (BCI) technology can realize dynamic room temperature adjustment based on individual real-time thermal sensation, which can provide the basis for future intelligent buildings. However, the generalization ability of previous thermal sensation discrimination model (TSDM) is limited, which is a serious obstacle to the application. In this paper, a general TSDM was developed by using convolutional neural network (CNN), which can be well applied to new subjects.In the study, the CNN-TSDM was established and evaluated based on the offline experimental data, and then the BCI closed-loop online room temperature control experiment was carried out based on this CNN-TSDM to further verify. The offline analysis results show that the recognition performance of CNN-TSDM in new subjects is significantly higher than that of typical shallow learning algorithms, and its area under the ROC curve (AUC) value reaches 0.789. In the online experiments of the two simulated environments, BCI using the CNN-TSDM dynamically controlled the air conditioning to improve the room temperature to the comfortable level according to the subjects' thermal sensation. The subjective score of subjects decreased from 3.1 to 3.0 for the hot uncomfortable to 1.1 and 1.2 for the cool comfortable (p < 0.001, p < 0.001). Moreover, in a hotter simulated experimental environment, BCI automatically controlled the air conditioner for longer cooling to obtain a same degree of thermal comfort. The total cooling time (p < 0.05) and the single cooling time (p < 0.05) of the air conditioner were significantly increased. This further confirmed the effectiveness and robustness of the general CNN-TSDM.

Somatosensory Event-Related Potential as an Electrophysiological Correlate of Endogenous Spatial Tactile Attention: Prospects for Electrotactile Brain-Computer Interface for Sensory Training.

Tactile attention tasks are used in the diagnosis and treatment of neurological and sensory processing disorders, while somatosensory event-related potentials (ERP) measured by electroencephalography (EEG) are used as neural correlates of attention processes. Brain-computer interface (BCI) technology provides an opportunity for the training of mental task execution via providing online feedback based on ERP measures. Our recent work introduced a novel electrotactile BCI for sensory training, based on somatosensory ERP; however, no previous studies have addressed specific somatosensory ERP morphological features as measures of sustained endogenous spatial tactile attention in the context of BCI control. Here we show the morphology of somatosensory ERP responses induced by a novel task introduced within our electrotactile BCI platform i.e., the sustained endogenous spatial electrotactile attention task. By applying pulsed electrical stimuli to the two proximal stimulation hotspots at the user's forearm, stimulating sequentially the mixed branches of radial and median nerves with equal probability of stimuli occurrence, we successfully recorded somatosensory ERPs for both stimulation locations, in the attended and unattended conditions. Waveforms of somatosensory ERP responses for both mixed nerve branches showed similar morphology in line with previous reports on somatosensory ERP components obtained by stimulation of exclusively sensory nerves. Moreover, we found statistically significant increases in ERP amplitude on several components, at both stimulation hotspots, while sustained endogenous spatial electrotactile attention task is performed. Our results revealed the existence of general ERP windows of interest and signal features that can be used to detect sustained endogenous tactile attention and classify between spatial attention locations in 11 healthy subjects. The current results show that features of N140, P3a and P3b somatosensory ERP components are the most prominent global markers of sustained spatial electrotactile attention, over all subjects, within our novel electrotactile BCI task/paradigm, and this work proposes the features of those components as markers of sustained endogenous spatial tactile attention in online BCI control. Immediate implications of this work are the possible improvement of online BCI control within our novel electrotactile BCI system, while these finding can be used for other tactile BCI applications in the diagnosis and treatment of neurological disorders by employing mixed nerve somatosensory ERPs and sustained endogenous electrotactile attention task as control paradigms.

Predictive neuromodulation of cingulo-frontal neural dynamics in major depressive disorder using a brain-computer interface system: A simulation study.

Deep brain stimulation (DBS) is a promising therapy for treatment-resistant major depressive disorder (MDD). MDD involves the dysfunction of a brain network that can exhibit complex nonlinear neural dynamics in multiple frequency bands. However, current open-loop and responsive DBS methods cannot track the complex multiband neural dynamics in MDD, leading to imprecise regulation of symptoms, variable treatment effects among patients, and high battery power consumption. Here, we develop a closed-loop brain-computer interface (BCI) system of predictive neuromodulation for treating MDD. We first use a biophysically plausible ventral anterior cingulate cortex (vACC)-dorsolateral prefrontal cortex (dlPFC) neural mass model of MDD to simulate nonlinear and multiband neural dynamics in response to DBS. We then use offline system identification to build a dynamic model that predicts the DBS effect on neural activity. We next use the offline identified model to design an online BCI system of predictive neuromodulation. The online BCI system consists of a dynamic brain state estimator and a model predictive controller. The brain state estimator estimates the MDD brain state from the history of neural activity and previously delivered DBS patterns. The predictive controller takes the estimated MDD brain state as the feedback signal and optimally adjusts DBS to regulate the MDD neural dynamics to therapeutic targets. We use the vACC-dlPFC neural mass model as a simulation testbed to test the BCI system and compare it with state-of-the-art open-loop and responsive DBS treatments of MDD. We demonstrate that our dynamic model accurately predicts nonlinear and multiband neural activity. Consequently, the predictive neuromodulation system accurately regulates the neural dynamics in MDD, resulting in significantly smaller control errors and lower DBS battery power consumption than open-loop and responsive DBS. Our results have implications for developing future precisely-tailored clinical closed-loop DBS treatments for MDD.

Non-Linear Adapted Spatio-Temporal Filter for Single-Trial Identification of Movement-Related Cortical Potential

The execution or imagination of a movement is reflected by a cortical potential that can be recorded by electroencephalography (EEG) as Movement-Related Cortical Potentials (MRCPs). The identification of MRCP from a single trial is a challenging possibility to get a natural control of a Brain–Computer Interface (BCI). We propose a novel method for MRCP detection based on optimal non-linear filters, processing different channels of EEG including delayed samples (getting a spatio-temporal filter). Different outputs can be obtained by changing the order of the temporal filter and of the non-linear processing of the input data. The classification performances of these filters are assessed by cross-validation on a training set, selecting the best ones (adapted to the user) and performing a majority voting from the best three to get an output using test data. The method is compared to another state-of-the-art filter recently introduced by our group when applied to EEG data recorded from 16 healthy subjects either executing or imagining 50 self-paced upper-limb palmar grasps. The new approach has a median accuracy on the overall dataset of 80%, which is significantly better than that of the previous filter (i.e., 63%). It is feasible for online BCI system design with asynchronous, self-paced applications.

Multiple Scale Convolutional Few-Shot Learning Networks for Online P300-Based Brain–Computer Interface and Its Application to Patients With Disorder of Consciousness

P300 brain-computer interfaces (BCIs) have significant potential for detecting and assessing residual consciousness in patients with disorders of consciousness (DoC) but are limited by insufficient data collected from them. In this study, a multiple scale convolutional few-shot learning network (MSCNN-FSL) was proposed to detect and recognize small sample P300 signals. A multiple scale convolutional neural network (MSCNN) was developed to learn different scale features from different scales of receptive fields to obtain more information from electroencephalograms (EEG). Then, a prototypical network with cosine distance was introduced as a classifier to classify and small sample P300 signals. The MSCNN-FSL was evaluated in two independent online BCI experiments. In the first P300 speller experiment, the presented network achieves good character recognition performance with average accuracies of 98.02%±1.70%. In the second experiment, eight healthy controls achieved photo recognition performance with average accuracies of 98.75%±1.49% and three of the twelve DoC patients achieved more than 64% online accuracies with significance. Our results indicated that the proposed MSCNN-FSL could correctly assess the three patients who may have residual consciousness but were misdiagnosed by the Coma Recovery Scale-Revised (CRS-R). Clinical evaluation after two months did prove our BCI assessment results for the three patients.

Optimizing Stimulus Frequency Ranges for Building a High-Rate High Frequency SSVEP-BCI.

The brain-computer interfaces (BCIs) based on steady-state visual evoked potential (SSVEP) have been extensively explored due to their advantages in terms of high communication speed and smaller calibration time. The visual stimuli in the low- and medium-frequency ranges are adopted in most of the existing studies for eliciting SSVEPs. However, there is a need to further improve the comfort of these systems. The high-frequency visual stimuli have been used to build BCI systems and are generally considered to significantly improve the visual comfort, but their performance is relatively low. The distinguishability of 16-class SSVEPs encoded by the three frequency ranges, i.e., 31-34.75 Hz with an interval of 0.25 Hz, 31-38.5 Hz with an interval of 0.5 Hz, 31-46 Hz with an interval of 1 Hz, is explored in this study. We compare classification accuracy and information transfer rate (ITR) of the corresponding BCI system. According to the optimized frequency range, this study builds an online 16-target high frequency SSVEP-BCI and verifies the feasibility of the proposed system based on 21 healthy subjects. The BCI based on visual stimuli with the narrowest frequency range, i.e., 31-34.5 Hz, have the highest ITR. Therefore, the narrowest frequency range is adopted to build an online BCI system. An averaged ITR obtained from the online experiment is 153.79 ± 6.39 bits/min. These findings contribute to the development of more efficient and comfortable SSVEP-based BCIs.

Optimize temporal configuration for motor imagery-based multiclass performance and its relationship with subject-specific frequency

Enhancing the performance of motor imagery-based Brain-Computer Interfaces (BCI) has been a significant goal in the BCI field. To achieve such a goal, several typical and promising techniques have been implemented, such as developing intelligent algorithms, combining features from different domains, extracting subject-specific parameters, and so forth. Previous studies performing temporal segmentation often ended up with a large number of features and placed a burden on computational cost, which poses a disadvantage to online analysis. This study proposes a novel approach to utilizing short-window segments to find an optimal combination of time segments and feature extractors. Electroencephalogram data from four datasets (BCI Competition IV dataset 2a, 2b and two self-acquired datasets) were segmented into four types of the time window and had features extracted by Common Spatial Pattern and its variants, and lastly classified by Linear Discriminant Analysis. The result shows that the combination of the “2-s with 1-s overlapping” segment and Filter Bank Common Spatial Pattern yields overall accuracy of 2–6.5% (p-value <0.05), higher than other methods in comparison. In addition, the study finds that there is a negative correlation (r = −0.38) between the number of subject-specific frequency bands and the performance (p-value <0.0001). The results demonstrate that the narrower and more focus frequency range chosen, the more accurate the model can achieve. Our results indicate that the “2-s with 1-s overlapping” segment would be an ideal candidate for online BCI analysis, and the response of selected frequency bands could be an informative indicator to evaluate BCI performance.

Implementing Performance Accommodation Mechanisms in Online BCI for Stroke Rehabilitation: A Study on Perceived Control and Frustration

Brain-computer interfaces (BCIs) are successfully used for stroke rehabilitation, but the training is repetitive and patients can lose the motivation to train. Moreover, controlling the BCI may be difficult, which causes frustration and leads to even worse control. Patients might not adhere to the regimen due to frustration and lack of motivation/engagement. The aim of this study was to implement three performance accommodation mechanisms (PAMs) in an online motor imagery-based BCI to aid people and evaluate their perceived control and frustration. Nineteen healthy participants controlled a fishing game with a BCI in four conditions: (1) no help, (2) augmented success (augmented successful BCI-attempt), (3) mitigated failure (turn unsuccessful BCI-attempt into neutral output), and (4) override input (turn unsuccessful BCI-attempt into successful output). Each condition was followed-up and assessed with Likert-scale questionnaires and a post-experiment interview. Perceived control and frustration were best predicted by the amount of positive feedback the participant received. PAM-help increased perceived control for poor BCI-users but decreased it for good BCI-users. The input override PAM frustrated the users the most, and they differed in how they wanted to be helped. By using PAMs, developers have more freedom to create engaging stroke rehabilitation games.

A pediatric near-infrared spectroscopy brain-computer interface based on the detection of emotional valence.

Brain-computer interfaces (BCIs) are being investigated as an access pathway to communication for individuals with physical disabilities, as the technology obviates the need for voluntary motor control. However, to date, minimal research has investigated the use of BCIs for children. Traditional BCI communication paradigms may be suboptimal given that children with physical disabilities may face delays in cognitive development and acquisition of literacy skills. Instead, in this study we explored emotional state as an alternative access pathway to communication. We developed a pediatric BCI to identify positive and negative emotional states from changes in hemodynamic activity of the prefrontal cortex (PFC). To train and test the BCI, 10 neurotypical children aged 8–14 underwent a series of emotion-induction trials over four experimental sessions (one offline, three online) while their brain activity was measured with functional near-infrared spectroscopy (fNIRS). Visual neurofeedback was used to assist participants in regulating their emotional states and modulating their hemodynamic activity in response to the affective stimuli. Child-specific linear discriminant classifiers were trained on cumulatively available data from previous sessions and adaptively updated throughout each session. Average online valence classification exceeded chance across participants by the last two online sessions (with 7 and 8 of the 10 participants performing better than chance, respectively, in Sessions 3 and 4). There was a small significant positive correlation with online BCI performance and age, suggesting older participants were more successful at regulating their emotional state and/or brain activity. Variability was seen across participants in regards to BCI performance, hemodynamic response, and discriminatory features and channels. Retrospective offline analyses yielded accuracies comparable to those reported in adult affective BCI studies using fNIRS. Affective fNIRS-BCIs appear to be feasible for school-aged children, but to further gauge the practical potential of this type of BCI, replication with more training sessions, larger sample sizes, and end-users with disabilities is necessary.

Examination of effectiveness of kinaesthetic haptic feedback for motor imagery-based brain-computer interface training

ABSTRACT Motor imagery-based brain computer interfaces (BCI) performance can be reinforced by visual presentation of feedback about the motor imagery displayed on a screen. However, to directly control robots by the BCI, a different feedback modality may be preferred. The objective of this study was to develop a BCI with kinaesthetic haptic feedback based on the detected motor imagery, and compare its performance to using visual feedback. Twelve online BCI runs with both feedback modalities were performed by ten adults without impairments, and four runs in a game-like task were performed by one adult with cerebral palsy and one child without impairments. The participants completed the BCI training with an average accuracy of 67.28 ± 11.2% for visual feedback and 75.12 ± 12.3% for kinaesthetic haptic feedback. The BCI training with kinaesthetic haptic feedback resulted in less workload and statistically higher classification accuracy than visual feedback (p = 0.03).