One-dimensional Photonic Crystal Research Articles

CaF2/TiO2 nanophotonic biosensor based on one-dimensional photonic crystal for Chikungunya virus detection

CaF2/TiO2 nanophotonic biosensor based on one-dimensional photonic crystal for Chikungunya virus detection

Developing an ultra-sensitive biosensor utilizing one-dimensional photonic crystal for anemia diagnosis

Developing an ultra-sensitive biosensor utilizing one-dimensional photonic crystal for anemia diagnosis

Tunable polarization-dependent defect modes and lateral shifts of one-dimensional photonic crystals containing Dirac semimetal-based hyperbolic metamaterials and chiral materials

The transmission and lateral shift properties of the one-dimensional photonic crystals containing Dirac semimetal-based hyperbolic metamaterials and chiral material defects are theoretically investigated by using the transfer matrix method in terahertz. It is found that the angle-independent omnidirectional photonic bandgaps (PBGs) for p-polarization can be realized in the photonic crystals made of dielectric and the Dirac semimetal-based hyperbolic metamaterials. However, the PBGs are blue-shifted with the incident angle for s-polarized wave. The omnidirectional PBGs can be tunable with the Fermi energy of the Dirac semimetal, the thickness ratio of the constitute layers and the structural parameters. When one or two isotropic chiral material layers are introduced in the photonic crystals, double or four polarization-dependent defect modes are found in the bandgap under oblique incidence due to the coupling and conversion between different polarized waves in the chiral defects. The frequency interval of the defect modes changes with the chirality parameter and the incident angle. It is also found that when a light is incident on the defective photonic crystals, the giant positive and negative Goos-Hänchen shifts of co-polarization reflected waves can be induced around the defect modes, which are sensitive to the polarization, the incident angle, the incident frequency and the chirality. The special optical properties of the proposed defective multiplayers provide possibilities for practical applications in designing polarization sensitive optical devices, such as filter and sensor.

Bulk and surface modes in a one-dimensional gyro-uniaxial photonic crystal

Bulk and surface modes in a one-dimensional gyro-uniaxial photonic crystal

Magnetic field sensor based on one-dimensional binary photonic crystal

The work describes the study of a 1D photonic crystal to detect the magnetic fluid as a function of temperature and magnetic field. The structural dimensions are designed by incorporating alternating layers in a periodic way. Each layer is formed as a pair, in which a combination of two materials, PbS and air, is made with a thickness of 91 nm and 387 nm. Along with the structure, there is another mode called the defect mode, with a thickness of 277.5 nm, where the detecting magnetic fluid is injected. The overall PC structure is characterized by the transfer matrix method (TMM), whose results in the transmission spectrum as a function of wavelength are analyzed theoretically. In response to the magnetic fluid, the defect mode is generated and meets resonance at a particular wavelength. The change in shift for magnetic fluid gives the results for sensor performances. In particular, the proposed sensor is optimized by its structural perceptions, and its sensitivity is identified for both magnetic field and temperature through the absorption of magnetic fluid. The study of the temperature dependence of magnetic fluid is carried out at high temperatures up to 500 K. The sensitivity is calculated by noting the shift in defect mode for various incident angles, thicknesses, and temperatures. An increase in the angle of incidence improves both the sensitivity and FOM. The maximum sensitivity achieved, which depends on magnetic field and temperature, is 31.2 pm Oe−1 and 6.46 pm K−1, respectively, for a thickness of 305.25 nm at an angle of incidence of 50°. A maximum FOM of 57.884 Oe−1 is also achieved at an incident angle of 50° and a temperature 300 K. The work’s findings suggest developing prospective photonic devices, and the proposed PC has dual sensor characteristics that may be tuned.

Highly Tunable Light Absorber Based on Topological Interface Mode Excitation of Optical Tamm State.

Optical absorbers based on Tamm plasmon states are known for their simple structure and high operational efficiency. However, these absorbers often have limited absorption channels, and it is challenging to continuously adjust their light absorption rates. Here, we propose a Tamm plasmon state optical absorber composed of a layered stack structure consisting of one-dimensional topological photonic crystals and graphene nano-composite materials. Using the four-by-four transfer matrix method, we investigate the structural relationship of the absorber. Our results reveal that topological interface states (TISs) effectively excite the optical Tamm state (OTS), leading to multiple absorption peaks. This expands the number of absorption channels, with the coupling number of the TIS determining the transmission quality of these channels-a value further adjustable by the period number of the photonic crystals. Tuning the filling factor, refractive index, and thickness of the graphene nano-composite material allows for a wide range of control over the device's absorption rate, from 0 to 1. Additionally, adjusting the defect layer thickness, incident angle, and Fermi energy enables us to control the absorber's operational bandwidth and the switching of its absorption effect. This work presents a new approach to expanding the tunability of optoelectronic devices.

The sensitivity of refractive index sensors based on defected 1D photonic crystals: an analytical approach

Abstract In this paper, an analytical formula for the sensitivity of optical sensors based on one-dimensional photonic crystals (PCs) with a defect was derived for the first time. Based on this formula, a comparative analysis of the sensitivity of defected PCs with and without mirror symmetry was carried out. In addition, the exact values of sensitivity in the limit of an infinite PC with a quarter-wave unit cell were obtained. It was shown that the sensitivity of a defective PC with an infinitely thick defect layer is equal to that of a perfectly reflecting Fabry-Perot resonator and does not depend on the specific structure of the PC. The results of this work provide a significant simplification of the analysis and optimization of optical sensors based on defective PCs, as well as a better understanding of the numerous numerical results obtained previously.

Improved performance of temperature sensors based on the one-dimensional topological photonic crystals comprising hyperbolic metamaterials

This paper seeks to progress the field of topological photonic crystals (TPC) as a promising tool in face of construction flaws. In particular, the structure can be used as a novel temperature sensor. In this regard, the considered TPC structure comprising two different PC designs named PC1 and PC2. PC1 is designed from a stack of multilayers containing Silicon (Si) and Silicon dioxide (SiO2), while layers of SiO2 and composite layer named hyperbolic metamaterial (HMM) are considered in designing PC2. The HMM layer is engineered using subwavelength layers of Si and Bismuth Germinate, or BGO (Bi4Ge3O12\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\ ext{Bi}}_{4}{\ ext{Ge}}_{3}{\ ext{O}}_{12}$$\\end{document}). The mainstay of our suggested temperature sensor is mainly based on the emergence of some resonant modes inside the transmittance spectrum that provide the stability in the presence of the geometrical changes. Meanwhile, our theoretical framework has been introduced in the vicinity of transfer matrix method (TMM), effective medium theory (EMT) and the thermo-optic characteristics of the considered materials. The numerical findings have extensively introduced the role of some topological parameters such as layers’ thicknesses, filling ratio through HMM layers and the periodicity of HMM on the stability or the topological features of the introduced sensor. Meanwhile, the numerical results reveal that the considered design provides some topological edge states (TESs) of a promising robustness and stability against certain disturbances or geometrical changes in the constituent materials. In addition, our sensing tool offers a relatively high sensitivity of 0.27 nm/°C.

Simulation and Analysis of Photonic Bandgapsin 1D Photonic Crystals Using MEEP

This study presents a comprehensive simulation and analysis of photonic band gaps in one-dimensional (1D) photonic crystals using the open-source software MEEP. Photonic crystals, with their periodic structures, exhibit photonic bandgaps that prevent the propagation of specific wavelengths of light, making them crucial for various optical applications. Unlike previous studies that primarily focused on theoretical and experimental methods, this research introduces a novel computational approach that enhances the accuracy and flexibility of modeling these bandgaps. Through detailed simulations, we explore the impact of different structural parameters on the photonic bandgap properties, providing valuable insights into optimizing these crystals for practical use. Our findings demonstrate significant improvements in the design and understanding of 1D photonic crystals, particularly in tailoring bandgaps for specific applications in optical devices. This work contributes to the advancement of photonic crystal technology by offering a robust framework for their analysis and application.

Improving the working distance for near-field lithography with supercell photonic crystal

Near-field lithography technology plays a vital role in chip manufacturing. However, near-field lithography devices with acceptable working distance (WD) have become a long-term pursuit for researchers. Here, a one-dimensional supercell photonic crystal (SPC) is proposed for near-field lithography. The simulation results show that the PCs could provide an air WD of over 100 nm in interference lithography and produce patterns with a resolution reach ∼67 nm (∼λ/6). The analyses indicate that using SPCs in interference lithography can make it more suitable for practical manufacturing. Furthermore, this type of PC can also be used in direct writing lithography. The simulation results show that the direct writing lithography could be realized with a WD of 100 nm, and the full width at half maximum of the focal spot is ∼137 nm. The principle presents a new method for controlling the evanescent waves, and the method would greatly promote the development and application of near field lithography.

Broadband terahertz modulation in symmetric gate-controlled graphene photonic crystals

Innovative research in terahertz (THz) communications is urgently needed to meet the evolving demands of the industry. In the past, the absence of optoelectronic devices made it difficult to control THz waves effectively. In this study, a symmetric gate-controlled graphene photonic crystal (PC) is proposed, which achieves a modulation depth (MD) of more than 99 %, an ultralow insertion loss (IL) of 0.08, and a wide operation bandwidth (BW) simultaneously. Additionally, even in graphene samples with low carrier mobilities, the high-performance MD can be achieved with acceptable IL in the broadband THz range. Furthermore, our proposed one-dimensional graphene PC system enhances manufacturing convenience. Through the adoption of the proposed symmetric structure, highly efficient THz communications can be achieved through photonic systems that utilize graphene.

Hybrid one-dimensional photonic crystals containing anisotropic metamaterials: Angle-driven photonic band gaps and angle-driven Tamm plasmon polaritons

Hybrid one-dimensional photonic crystals containing anisotropic metamaterials: Angle-driven photonic band gaps and angle-driven Tamm plasmon polaritons

Tunable polymer-based ternary one-dimensional photonic crystal with PVDF piezoelectric layer in the THz spectrum

This research introduces an innovative method for crafting adjustable one-dimensional photonic crystals by integrating a polyvinylidene fluoride (PVDF) piezoelectric layer into a ternary polymer structure. The incorporation of PVDF as a piezoelectric polymer in the photonic crystal allows for the simulation of an electric field sensitive photonic crystal. Two structures of the photonic crystal are examined, one with a defect layer and one without, while the impact of piezoelectric parameters on the transmission spectrum is scrutinized. The computational outcomes clearly demonstrate that the photonic band gap can be efficiently modified by applying an external electric field in the THz frequency. Incorporating a defect mode that is sensitive to electric field allows for the creation of a narrow bandpass region (∼ 5 GHz) within a bandgap. This narrow region has the capacity to be precisely modified through the application of an external electrical field. This distinctive design proposal provides a means to govern and modify the optical characteristics of the crystal, rendering it a promising candidate for diverse photonic applications.

Investigation of the origin of structural colors in calliphoridae flies for bioinspiration

The article presents a study of the origin of iridescent structural coloration in the thorax of the Calliphoridae fly, intending to inspire in this fly optical and structural properties of interest for use in industry. We carried out SEM microscopic analyses and modeled optical properties using the transfer matrix. The results indicate that this coloration is due to the presence of a one-dimensional photonic crystal composed of two alternating layers of specific thickness. Microscopic analysis using a scanning electron microscope led to this conclusion. Based on these results, a model was proposed describing the structure as consisting of chitin and air. By modulating the optical properties of this structure at different angles of incidence, it was observed that the iridescent colors, notably green, blue, and violet, matched the predictions made by this modulation. These colors are the result of constructive interference. In addition, we observed the presence of a photonic band gap when exploring the influence of the periodicity of chitin and air multilayer in the fly on reflection intensity. Thus, a comparative study of the fly and that emerged in water with a different refractive index revealed consistency in our model. Finally, the results obtained improve our understanding of the mechanisms responsible for this coloration and pave the way for the development of new materials inspired by nature, with potential applications in the fields of biomimetic engineering and optics.

Chirality-dependent topological edge states in photonic metacrystal.

Topological edge state, a unique mode for manipulating electromagnetic waves (EMs), has been extensively studied in both fundamental and applied physics. Up to now, the work on topological edge states has focused on manipulating linearly polarized waves. Here, we realize chirality-dependent topological edge states in one-dimensional photonic crystals (1DPCs) to manipulate circularly polarized waves. By introducing the magneto-electric coupling term (chirality), the degeneracy Dirac point (DP) is opened in PCs with symmetric unit cells. The topological properties of the upper and lower bands are different in the cases of left circularly polarized (LCP) and right circularly polarized (RCP) waves by calculating the Zak phase. Moreover, mapping explicitly 1D Maxwell's equations to the Dirac equation, we demonstrate that the introduction of chirality can lead to different topological properties of bandgaps for RCP and LCP waves. Based on this chirality-dependent topology, we can further realize chirality-dependent topological edge states in photonic heterostructures composed of two kinds of PCs. Finally, we propose a realistic structure for the chirality-dependent topological edge states by placing metallic helixes in host media. Our work provides a method for manipulating topological edge states for circularly polarized waves, which has a broad range of potential applications in designing optical devices including polarizers, filters, and sensors with robustness against disorder.

1D Topological Photonic Crystal based Nanosensor for Tuberculosis Detection.

In this study, we present a nanosized biosensor based on the photobiological properties of one-dimensional (1D) topological photonic crystals (PCs). A topological structure had been designed by combining two photonic crystal structures (PC 1 and PC 2) comprised of functional material layers, Si and SiO2. These two, PC 1 and PC 2, differ in terms of the thickness and arrangement of these dielectric materials. We carried out a comparison between two distinct topological photonic crystals: one using random photonic crystals, and the other featuring a mirror heterostructure. Tuberculosis may be diagnosed by inserting a sensor layer into 1D topological photonic crystals. The sensing process is based on the refractive indexes of the analytes in the sensor layer. When the 1D-topological heterostructure-based PC and its mirror-image structures are stacked together, the sensor becomes more efficient for analyte detection than the conventional PCs. The random-based topological photonic crystal outperformed the heterostructure-based topological photonic crystal in analyte sensing. Photonic media witness notable blue shifts due to the analytes' variations in refractive index. The numerical results of the sensor are computed using the transfer matrix approach. Effective results are achieved by optimizing the thicknesses of the sensor layer and dielectric layers; number of periods and incident angle. In normal incident light, the developed sensor shows a high sensitivity of 1500 nm/RIU with a very low limit of detection in the order of 2.24E-06 RIU and a high-quality factor of 30659.54.

Non-reciprocal characteristics of dual defect modes in a one-dimensional photonic crystal based on Weyl semimetal

The non-reciprocal behavior of defect modes of a one-dimensional photonic crystal with two Weyl-semimetal-based defects is investigate by applying the transfer matrix method. The transmission spectrum of the structure exhibits two distinct defect modes. The study shows that these defect modes can be adjusted by altering the thickness of the Weyl semimetal layers and the modulus of the axial vector b → for both forward- and backward-impinging cases. The peak transmission and frequency of the defect modes are found to be dependent on the thickness of the Weyl semimetal layers, the magnitude of the axial vector b → , and the impinging direction of the incoming beam. Additionally, the quality factor of the defect modes changes with the thickness of the Weyl semimetal layers and the magnitude of the axial vector b → but is largely unaffected by reversing the impinging direction of the incoming beam.

Phase sensitive slow light in semiconductor quantum dots

This article presents a theoretical investigation of phase-controlled propagation of slow light under an electromagnetically induced transparency window in a multilayered one-dimensional photonic crystal with semiconductor quantum dot nanostructures as defects. To achieve the electromagnetically induced transparency window, a setup utilizes a faint probe laser pulse alongside two powerful control laser beams arranged in a closed-loop cascade configuration. In this arrangement, a significant Kerr nonlinearity, approximately on the scale of ∼10−13m2/V2, is discerned within the quantum dot nanostructures at a probe wavelength of 1.55 μm. It is observed that both the amplitude and the phase relationship of the control Rabi frequencies play crucial roles in governing the dynamics of the group velocity of the probe field in the quantum dot nanostructures. Under the regime of electromagnetically induced transparency, the group velocity of the probe field is significantly reduced, approximately by a factor of 103 times as compared to the light speed in free space. These findings hold promise for potential applications in nonlinear optics.

Urine glucose concentration detection biosensor using one-dimensional photonic crystals with periodical and Fibonacci sequences based on Tamm plasmon resonance

This paper presents the design of biosensors utilizing one-dimensional photonic crystals with periodical and Fibonacci sequences for measuring glucose concentration in urine, aimed at facilitating continuous blood glucose monitoring for diabetic patients. Exploiting Tamm plasmon resonance within a photonic band gap in the medium wave infrared band, the biosensor comprises a configuration with a one-dimensional photonic crystal and an Ag layer deposited on an infrared prism, with a urine sample layer in between. Utilizing the transfer matrix method, the reflection spectra for electromagnetic waves are calculated. The wavelength position of the Tamm plasmon resonant dip is influenced by variations in glucose concentration within the urine sample. This is attributed to the distinct refractive indices exhibited by urine samples with different glucose concentrations. Optimizing biosensor performance under various incident angles involves adjusting the Ag layer and urine sample thicknesses while maintaining excellent linear characteristics. The optimal performance of the biosensor with Fibonacci sequence one-dimensional photonic crystal is significantly superior, with a sensitivity of 113,000 nm RIU−1, a figure of merit of 2.05 × 105 RIU−1, and a detection limit of 4.84 × 10−7 RIU. The combination of high performance and a straightforward structure makes the proposed biosensors for detecting urine glucose concentrations promising in biomedical diagnostics.

Significant second harmonic generation in one-dimensional magnetized ferrite tunable nonlinear photonic crystals

Significant second harmonic generation in one-dimensional magnetized ferrite tunable nonlinear photonic crystals