On-off Keying Research Articles

High-order direct modulation terahertz communications with a wideband time-coding metachip modulator.

Terahertz communication technology based on on-off keying (OOK) direct modulation is vital for sixth-generation communication systems, especially in short-distance and high-rate applications. However, low-order OOK modulation often leads to suboptimal anti-interference capabilities and a heightened demodulation threshold. Here, we propose a high-order direct modulation terahertz communication framework using a wideband time-coding metachip modulator. The modulator leverages the electromagnetic resonance properties within the metaunit structure, with control enabled by gallium arsenide Schottky diodes. By manipulating the timing of voltage pulses applied to these diodes, the equivalent electromagnetic resonance distributions can be precisely regulated in the time domain. This enables independent and accurate control over the amplitude and phase of terahertz harmonics. Leveraging this technique, three high-order modulation schemes-quadrature phase-shift keying, 16-phase-shift keying, and 16-quadrature amplitude modulation- are achieved in a direct modulation and direct detection system, demonstrating the real-time image transmission. The proposed method offers an important way to develop integrated and low-complexity terahertz wireless communication systems.

Single laser based novel wavelength shift keying scheme for ground to satellite bidirectional links

Abstract Laser communication in space is gaining more recognition due to its ability to provide a much broader and unregulated data transmission capacity compared to traditional radio frequency systems, while also significantly decreasing the size, power requirements, and weight of the communication system. In this work, a novel technique for the generation of a wavelength shift keying (WSK) signal for the bidirectional transmission of 10 Gbps data between the ground station and low Earth orbit (LEO) satellite is presented. Our proposed scheme requires a single laser source to transmit WSK signal, that generally requires two wavelength sources to transmit the binary data bits. Furthermore, the scheme allows us to remodulate the optical signal received at the LEO satellite for downlink signal transmission. Therefore, the requirement of a laser source at the LEO satellite is eliminated, achieving the much desirable goals of low power consumption, weight and cost. The free space optical (FSO) channel is modelled using the gamma-gamma channel model. The performance of the proposed link is also compared with a conventional On-Off keying (OOK) based modulation scheme by using bit-error-rate (BER) as the performance metric.

Pulse position encoded RZ-OOK transmission for free-space optical communications

This paper proposes a pulse position encoded return-to-zero on-off keying (PP-RZ-OOK) transmission for free space optical (FSO) communications. At the transmitter end, PP-RZ-OOK signal is modulated by encoding the pulse position of RZ-OOK in the symbol duration. At the receiver end, PP-RZ-OOK signal is demodulated by symbol-by-symbol signal estimation. First, the existence of pulse is distinguished by adaptive threshold decision using the channel state information (CSI). Then, with respect to the symbol with the pulse, the knowledge of pulse position is estimated by slot-by-slot pulse power comparison. Finally, PP-RZ-OOK signal is effectively demodulated by both pulse existence and pulse position estimation. Therefore, the spectral efficiency of RZ-OOK is increased by the proposed pulse position encoding technique. The performance of the proposed PP-RZ-OOK modulation was verified through simulations under different turbulence channels and pulse durations, and it was compared with non-return-to-zero OOK (NRZ-OOK) and RZ-OOK modulations. The simulation results demonstrated that the capability of scintillation effect compensation was significantly enhanced compared with NRZ-OOK due to the pulse power increasing. Besides, the spectral efficiency was improved compared with RZ-OOK due to the additional pulse position encoding.

A 5 mW 28 nm CMOS Low-Noise Amplifier with Transformer-Based Electrostatic Discharge Protection for 60 GHz Applications

This paper presents a low-power 60 GHz low-noise amplifier (LNA) designed for Gbit/s applications using 28 nm CMOS technology. The LNA exploits a single-stage pseudo-differential architecture with integrated input transformer for both electrostatic discharge (ESD) protection and simultaneous noise/impedance matching. An effective power-constrained design strategy is adopted to pursue the lowest current consumption at the minimum noise figure (NF), with the best tradeoff between gain and frequency bandwidth. The LNA, which has been designed to drive an on–off keying (OOK) demodulator, is operated at a supply voltage as low as 0.9 V and achieves a voltage gain of about 21 dB with a 3 dB bandwidth of 2 GHz around 60 GHz. Thanks to the proper impedance transformation at the 60 GHz input, the amplifier exhibits an NF of 6.3 dB, also including the input transformer loss with a very low power consumption of about 5 mW. The adoption of a single-stage topology also allows an excellent input 1 dB compression point (IP1dB) of −4.7 dBm. The input transformer guarantees up to 2 kV human body model (HBM) ESD protection.

Enhancing Signal-to-Noise Ratio in Vehicle-to-Vehicle Visible Light Communication Systems Through Diverse LED Array Transmitter Geometries

In this paper, a novel method is introduced to enhance the performance of vehicle-to-vehicle (V2V) visible light communication (VLC) by employing different transmitter (Tx) light-emitting diode (LED) array arrangements with different LED orientations. Improving the signal-to-noise ratio (SNR) is crucial for V2V VLC systems to provide long communication ranges. For this purpose, six transmitter configurations are proposed: single-LED transmitters, as well as 3 × 3 square-, single hexagonal-, octagonal-, 5 × 5 square-, and honeycomb hexagonal-shaped LED arrays. Indoor VLC studies using LED arrays offer a uniform SNR, while outdoor studies focus on optimizing the receiver side to enhance system performance. This paper optimizes system performance by increasing the SNR and communication range of V2V VLC systems by changing the geometry of the Tx LED array and LED orientations. A V2V VLC system using on–off keying (OOK) is modeled in MATLAB, and the SNR and bit error rate (BER) are simulated for different Tx configurations. Our results show that the honeycomb hexagonal transmitter design provides a 19% improvement in system performance with a spacing of 1 cm, and maintains a 16% improvement when the array size is reduced by a factor of 100, making it smaller than one of the smallest industrial headlight modules.

Multi-plane light conversion (MPLC) LP mode multiplexer based on grayscale maskless lithography.

Multi-plane light conversion (MPLC) is a technique that uses multiple phase plates to modulate a light beam step-by-step. This technique has attracted widespread attention in the field of mode-division multiplexing (MDM) communications due to its high flexibility. MPLC device requires precisely controlled fabrication accuracy in experiments, but conventional multi-etching processes will accumulate alignment errors. Here, the fabrication of the MPLC device using maskless grayscale lithography was proposed, which requires only a single-exposure process. Through single-exposure lithography, the continuous phase of the digital mask ranging from 0 to 2π on MPLC is discretized into 128 steps. The digital masks of the MPLC with more steps of phase can reduce the insertion loss and mode crosstalk of LP modes. By using the fabricated MPLC, we experimentally demonstrate the MDM of LP01, LP11a, LP11b, and LP21 modes with mode crosstalk less than -22 dB, and the insertion loss less than 4 dB. In high-speed optical communications, each LP mode carries a 10 Gbit/s on-off keying (OOK) signals, and the experimentally measured bit error rates (BER) curves power penalty is less than -7 dB. The experiment demonstrated that maskless grayscale lithography can efficiently and accurately fabricate MPLC mode multiplexers.

Enhancing the efficiency of wavelength-shift fiber-based detectors for optical wireless communications

A wavelength-shift fiber-based optical detector promises to revolutionize the deployment of optical wireless communication (OWC) due to its inherent advantages over traditional receivers. These advantages include a flexible structure, a wide field of view (FOV), and a large active area. Despite progress in previous studies, there remains a gap in optimizing the re-utilization of unabsorbed light within wavelength-shift fiber (WSF) and maximizing the efficiency of light focusing onto photodetectors. To address these challenges, this study explores three novel, to the best of our knowledge, approaches to enhance the light conversion and detection efficiency of WSF-based optical detectors. First, a reflective mirror is employed behind the WSF array to increase the light absorption and re-emission probability. Second, a reflective mirror is placed at one end of the WSF array to direct the light toward the opposite end. Third, a tightly bundled WSF array configuration focuses the emitted light onto the photodetector’s active area. Experimental results demonstrate that each approach significantly improves the peak-to-peak voltage. This work presents an optical detector design featuring a large active area of 0.4cm×20cm, based on a blue-to-green color-converting WSF and achieving a high 3-dB bandwidth of up to 48 MHz. This design enables real-time data transmission at rates of 275 Mbps using non-return-to-zero on-off keying (NRZ-OOK) modulation over a distance of 1 m. Additionally, the transmission link operates at over 250 Mbps, with bit error rates (BERs) below the forward error correction (FEC) limit, under a wide FOV of 60°. This work opens exciting possibilities for revolutionizing photodetection schemes in non-line-of-sight free-space optical communications.

A 6-mode pre-amplifier for turbulence-resistant free-space optical communication

A few-mode pre-amplifier with high gain and high coupling efficiency was suitable for the turbulence-resistant free-space optical (FSO) communication. Here, we first built and experimentally demonstrated a forward- and core-pumped 6-mode (6 M) pre-amplifier. By optimizing the 6 M erbium-doped fiber (EDF) length, we achieved over 28 dB of gain and a noise figure of less than 7 dB with an input intensity of −30 dBm. Moreover, we experimentally evaluated the 6 M pre-amplifier of 2.5 Gbps On-Off Keying (OOK) signal transmission with a homemade tunable turbulence emulator. The advantages of the 6 M pre-amplifier over the single-mode (SM) pre-amplifier varied with channel turbulence conditions in terms of communication performances. Compared with the SM pre-amplifier, the coupling efficiencies increased by 4.5 dB and 5.8 dB on average, and the median bit error rates (BERs) of the communication system improved by 2 and 5 orders of magnitude, respectively, in the presence of channels with the scintillation index σI2 of 0.3978 and 1.0553 (moderate to strong turbulence).

Farm Monitoring System with Drones and Optical Camera Communication.

Drones have been attracting significant attention in the field of agriculture. They can be used for various tasks such as spraying pesticides, monitoring pests, and assessing crop growth. Sensors are also widely used in agriculture to monitor environmental parameters such as soil moisture and temperature. Due to the high cost of communication infrastructure and radio-wave modules, the adoption of high-density sensing systems in agriculture is limited. To address this issue, we propose an agricultural sensor network system using drones and Optical Camera Communication (OCC). The idea is to transmit sensor data from LED panels mounted on sensor nodes and receive the data using a drone-mounted camera. This enables high-density sensing at low cost and can be deployed in areas with underdeveloped infrastructure and radio silence. We propose a trajectory control algorithm for the receiving drone to efficiently collect the sensor data. From computer simulations, we confirmed that the proposed algorithm reduces total flight time by 30% compared to a shortest-path algorithm. We also conducted a preliminary experiment at a leaf mustard farm in Kamitonda-cho, Wakayama, Japan, to demonstrate the effectiveness of the proposed system. We collected 5178 images of LED panels with a drone-mounted camera to train YOLOv5 for object detection. With simple On-Off Keying (OOK) modulation, we achieved sufficiently low bit error rates (BERs) under 10-3 in the real-world environment. The experimental results show that the proposed system is applicable for drone-based sensor data collection in agriculture.

Using ADTS and CNN methods to effectively monitor CD, crosstalk, and OSNR in an optical network

The article presents the results of a method based on asynchronous delay-tap sampling (ADTS) and convolutional neural network (CNN) for determining simultaneously occurring disturbances described using the chromatic dispersion (CD), crosstalk and optical signal-to-noise ratio (OSNR) parameters. The ADTS method was used to generate training and test data for the convolutional network, which in turn was used to learn to recognize interference from said data. The tests were carried out for a transmission speed of 10 Gbit/s and for on-off keying (OOK) and differential phase shift keying (DPSK) modulation. Very good results were obtained in recognizing simultaneously occurring phenomena. Accuracy of over 99% was achieved for CD and crosstalk for DPSK modulation and over 98% for OOK modulation. In the case of amplified spontaneous emission (ASE) noise, slightly weaker results were obtained, above 95–96% for both modulations. Based on the conducted research, it was determined that the use of ADTS and CNN methods enables monitoring of simultaneously occurring CD, crosstalk, and ASE noise in the physical layer of the optical network, while maintaining the requirements for modern monitoring systems.

Error performance analysis for OOK modulated optical camera communication systems

Integrating image sensors’ imaging capabilities into the receiver for visible light communication is a prominent characteristic of optical camera communication (OCC). However, the exposure effect during imaging distorts received waveforms and introduces inter-symbol interference (ISI), leading to decreased OCC reliability. This paper aims to provide an in-depth analysis of the impact of image sensor exposure effects on the error performance of OCC systems. Analytical expressions of the pixel signal-to-interference and noise ratio (PSINR) are derived using the pulse response function (PRF) for an on-off keying (OOK) modulated OCC system with varying exposure times. Furthermore, the bit error rate (BER) performance is evaluated analytically using PSINR, and a straightforward BER measurement scheme is proposed for experimental validation. Results from analyses and experiments conducted under different exposure times indicate that longer exposures lead to increased ISI and decreased PSINR, thereby increasing the error probability of data demodulation. Additionally, a combined impact of noise and exposure on OCC system reliability is observed, highlighting noise-limited and interference-limited characteristics under low and high signal-to-noise ratio (SNR) conditions, respectively. By utilizing PSINR as a bridge, this paper precisely analyzes OCC system reliability under exposure effects, laying a theoretical foundation for system design and optimization.

Evaluation of underwater laser communication performance across different water types

Abstract This paper demonstrates underwater communication using a green laser with On-Off Keying (OOK) modulation. The study focuses on communication performance between an underwater platform and an air-based platform under varying conditions, including different weather, saline, and clear water environments. A photovoltaic (PV) cell is used as a receiver to detect signals. The experiment analyzes data transmission from air to underwater across various conditions, including with and without sunlight. The results indicate that green lasers are optimal for underwater communication, with improved performance as the water depth increases, making them particularly suitable for underwater communication systems.

Full-duplex dynamic TDMA scheme and clock synchronization and compensation method for the multi-user UWOC system.

In this Letter, we propose a full-duplex dynamic time division multiple access (FDD-TDMA) scheme for multi-user underwater wireless optical communication (UWOC). It supports full-duplex communication through wavelength division duplex (WDD) and enhances the system throughput using dynamic time resource allocation. Additionally, a clock synchronization and compensation method is proposed for precise clock synchronization without time-keeping. With the proposed FDD-TDMA scheme and the clock synchronization and compensation method, we establish a two-user UWOC system based on on-off keying (OOK) modulation. Experiments are conducted in a 10 m water pool environment. The experimental results show that the designed system can achieve a data rate of 25 Mbps without error codes and 40 Mbps with a bit error rate (BER) below the forward error correction (FEC) limit. The FDD-TDMA scheme notably improves the system throughput when communication demands among users are variable compared to the conventional time division multiple access (TDMA). Moreover, a reduction in phase deviations from microseconds to ten nanoseconds is achieved by the clock synchronization and compensation method.

Optoelectronics Interfaces for a VLC System for UHD Audio-Visual Content Transmission in a Passenger Van: HW Design.

This work aims to provide the hardware (HW) design of the optoelectronics interfaces for a visible-light communication (VLC) system that can be employed for several use cases. Potential applications include the transmission of ultra-high-definition (UHD) streaming video through existing reading lamps installed in passenger vans. In this use case, visible light is employed for the downlink, while infrared light is used for the uplink channel, acting as a remote controller. Two primary components -a Light Fidelity (LiFi) router and a USB dongle-were designed and implemented. The 'LiFi Router', handling the downlink channel, comprises components such as a visible Light-Emitting Diode (LED) and an infrared receiver. Operating at a supply voltage of 12 V and consuming current at 920 mA, it is compatible with standard voltage buses found in transport vehicles. The 'USB dongle', responsible for the uplink, incorporates an infrared LED and a receiver optimized for visible light. The USB dongle works at a supply voltage of 5 V and shows a current consumption of 1.12 A, making it well suited for direct connection to a universal serial bus (USB) port. The bandwidth achieved for the downlink is 11.66 MHz, while the uplink's bandwidth is 12.27 MHz. A system competent at streaming UHD video with the feature of being single-input multiple-output (SIMO) was successfully implemented via the custom hardware design of the optical transceivers and optoelectronics interfaces. To ensure the system's correct performance at a distance of 110 cm, the minimum signal-to-noise ratio (SNRmin) for both optical links was maintained at 10.74 dB. We conducted a proof-of-concept test of the VLC system in a passenger van and verified its optimal operation, effectively illustrating its performance in a real operating environment. Exemplifying potential implementations possible with the hardware system designed in this work, a bit rate of 15.2 Mbps was reached with On-Off Keying (OOK), and 11.25 Mbps was obtained with Quadrature Phase Shift Keying (QPSK) using Orthogonal Frequency-Division Multiplexing (OFDM) obtaining a bit-error rate (BER) of 3.3259 × 10-5 in a passenger van at a distance of 72.5 cm between the LiFi router and the USB dongle. As a final addition, a solar panel was installed on the passenger van's roof to power the user's laptop and the USB dongle via a power bank battery. It took 13.4 h to charge the battery, yielding a battery life of 22.3 h. This characteristic renders the user's side of the system entirely self-powered.

Deep Integration of Fiber-Optic Communication and Sensing Systems Using Forward-Transmission Distributed Vibration Sensing and on-off Keying.

The deep integration of communication and sensing technology in fiber-optic systems has been highly sought after in recent years, with the aim of rapid and cost-effective large-scale upgrading of existing communication cables in order to monitor ocean activities. As a proof-of-concept demonstration, a high-degree of compatibility was shown between forward-transmission distributed fiber-optic vibration sensing and an on-off keying (OOK)-based communication system. This type of deep integration allows distributed sensing to utilize the optical fiber communication cable, wavelength channel, optical signal and demodulation receiver. The addition of distributed sensing functionality does not have an impact on the communication performance, as sensing involves no hardware changes and does not occupy any bandwidth; instead, it non-intrusively analyzes inherent vibration-induced noise in the data transmitted. Likewise, the transmission of communication data does not affect the sensing performance. For data transmission, 150 Mb/s was demonstrated with a BER of 2.8 × 10-7 and a QdB of 14.1. For vibration sensing, the forward-transmission method offers distance, time, frequency, intensity and phase-resolved monitoring. The limit of detection (LoD) is 8.3 pε/Hz1/2 at 1 kHz. The single-span sensing distance is 101.3 km (no optical amplification), with a spatial resolution of 0.08 m, and positioning accuracy can be as low as 10.1 m. No data averaging was performed during signal processing. The vibration frequency range tested is 10-1000 Hz.

Simultaneous transmission of multi-format signals in the mid-infrared over free space

Mid-infrared (MIR) light within the 3–5 μm spectrum offers distinct advantages over the 1.5 μm band, particularly in adverse atmospheric conditions, rendering it a favorable option for free-space optical (FSO) communication. The transmission capacity within the 3–5 μm band is relatively low due to the immature state of its devices. In this study, we demonstrate multi-format signals FSO transmission with a total of 40 Gbps capacity in the 3 μm band, utilizing our developed MIR transmitter and receiver modules. These modules facilitate wavelength conversion between the 1.5 μm and 3 μm bands through the utilization of difference-frequency generation (DFG) effect. The MIR transmitter effectively produces three MIR signals: On-Off Keying (OOK), Binary Phase Shift Keying (BPSK), and Quadrature Phase Shift Keying (QPSK) optical signals. The generated MIR power is 7.8 dBm, covering a wavelength range from 3.5864 to 3.5885 μm. The MIR receiver regenerates the three format signals with a power of −29.6 dBm. Relevant results of regenerated signal demodulation have been collected in detail, including bit error ratio (BER), constellation diagram, and eye diagram. The required powers for the 10 Gbps OOK, BPSK, and QPSK are −37.82, −40.24, and −39.4 dBm at BER of 1 × 10−6. It is expected to further push the data capacity to the terabit-per-second level by adding more 1.5 μm band laser sources and using wider-bandwidth chirped nonlinear crystals.

Optimizing Indoor Airport Navigation with Advanced Visible Light Communication Systems.

This study presents a novel approach to enhancing indoor navigation in crowded multi-terminal airports using visible light communication (VLC) technology. By leveraging existing luminaires as transmission points, encoded messages are conveyed through modulated light signals to provide location-specific guidance. The objectives are to facilitate navigation, optimize routes, and improve system performance through Edge/Fog integration. The methodology includes the use of tetrachromatic LED-equipped luminaires with On-Off Keying (OOK) modulation and a mesh cellular hybrid structure. Detailed airport modeling and user analysis (pedestrians and luggage/passenger carriers) equipped with PINPIN optical sensors are conducted. A VLC-specific communication protocol with coding and decoding techniques ensures reliable data transmission, while wayfinding algorithms offer real-time guidance. The results show effective data transmission and localization, enabling self-localization, travel direction inference, and route optimization. Agent-based simulations demonstrate improved traffic control, with analyses of user halting and average speed. This approach provides reliable indoor navigation independent of GPS signals, enhancing accessibility and convenience for airport users. The integration of VLC with Edge/Fog architecture ensures efficient movement through complex airport layouts.

A Prediction about Radio Frequency Envelope Detectors for Implementing a 2.4 GHz Rectenna for IEEE 802.15.4 with MOS Transistors

This study introduces a rectenna, functioning as an RF envelope detector, utilizing a 16 nm bulk MOS transistor (metal-oxide-semiconductor field-effect transistor) for nonlinear detection. A circuit architecture is presented alongside a detailed design methodology and simulations. The detector efficiently demodulates a 2.4 GHz OOK (On/Off Keying) encoded signal, comprising a 32-bit word, within 320 μs. Remarkably, the circuit operates passively, requiring no voltage supply or bias current, and functions effectively with −53 dBm input power at the antenna. This capability enables the decoding of 32-bit unsigned integer radio packets as a wakeup radio event. The effectiveness of the envelope detector is substantiated through comprehensive simulations.

Optical matrix computing for optical forward error correction encoding.

Forward error correction (FEC) has been widely used in today's communication systems, implemented by electronics. For optical communications, on-the-fly optical processing is highly desired for reduced optical-electrical-optical (OEO) conversions, so as to reduce the latency and cost. In this work, we present a proof-of-concept study of an optical FEC encoding method based on optical matrix computing by wavelength-division multiplexing (WDM) with time-wavelength interleaved manipulation. The optical FEC encoder realized by optical fiber devices features nearly equivalent net encoding gain compared with the theoretical electrical encoder. The experimental results indicate effective error correction, with 2-dB net gain in on-off keying (OOK) transmission at 20 Gb/s, supporting the realization of transmission-computing-merged systems. Meanwhile, the proposed method also supports the whole realization of FEC with both encoding and decoding.

Advancing LWIR FSO communication through high-speed multilevel signals and directly modulated quantum cascade lasers.

This study investigates the potential of long-wave infrared (LWIR) free-space optical (FSO) transmission using multilevel signals to achieve high spectral efficiency. The FSO transmission system includes a directly modulated-quantum cascade laser (DM-QCL) operating at 9.1 µm and a mercury cadmium telluride (MCT) detector. The laser operated at the temperature settings of 15°C and 20°C. The experiment was conducted over a distance of 1 m and in a lab as a controlled environment. We conduct small-signal characterization of the system, including the DM-QCL chip and MCT detector, evaluating the end-to-end response of both components and all associated electrical elements. For large-signal characterization, we employ a range of modulation formats, including non-return-to-zero on-off keying (NRZ-OOK), 4-level pulse amplitude modulation (PAM4), and 6-level PAM (PAM6), with the objective of optimizing both the bit rate and spectral efficiency of the FSO transmission by applying pre- and post-processing equalization. At 15°C, the studied LWIR FSO system achieves net bitrates of 15 Gbps with an NRZ-OOK signal and 16.9 Gbps with PAM4, both below the 6.25% overhead hard decision-forward error correction (6.25%-OH HD-FEC) limit, and 10 Gbps NRZ-OOK below the 2.7% overhead Reed-Solomon RS(528,514) pre-FEC (KR-FEC limit). At 20°C, we obtained net bitrates of 14.1 Gbps with NRZ-OOK, 16.9 Gbps with PAM4, and 16.4 Gbps with PAM6. Furthermore, we evaluate the BER performance as a function of the decision feedback equalization (DFE) tap number to explore the role of equalization in enhancing signal fidelity and reducing errors in FSO transmission. Our findings accentuate the competitive potential of DM-QCL and MCT detector-based FSO transceivers with digital equalization for the next generation of FSO communication systems.