Oligo Ethylene Glycol Methyl Ether Research Articles

Deciphering the Lipid-Random Copolymer Interactions and Encoding Their Properties to Design a Hybrid System.

Lipid/copolymer colloidal systems are deemed hybrid materials with unique properties and functionalities. Their hybrid nature leads to complex interfacial phenomena, which have not been fully encoded yet, navigating their properties. Moving toward in-depth knowledge of such systems, a comprehensive investigation of them is imperative. In the present study, hybrid lipid/copolymer structures were fabricated and examined by a gamut of techniques, including dynamic light scattering, fluorescence spectroscopy, cryogenic transmission electron microscopy, microcalorimetry, and high-resolution ultrasound spectroscopy. The biomaterials that were mixed for this purpose at different ratios were 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine and four different linear, statistical (random) amphiphilic copolymers, consisting of oligo(ethylene glycol) methyl ether methacrylate as the hydrophilic comonomer and lauryl methacrylate as the hydrophobic one. The colloidal dispersions were studied for lipid/copolymer interactions regarding their physicochemical, morphological, and biophysical behavior. Their membrane properties and interactions with serum proteins were also studied. The aforementioned techniques confirmed the hybrid nature of the systems and the location of the copolymer in the structure. More importantly, the random architecture of the copolymers, the hydrophobic-to-hydrophilic balance of the nanoplatforms, and the lipid-to-polymer ratio are highlighted as the main design-influencing factors. Elucidating the lipid/copolymer interactions would contribute to the translation of hybrid nanoparticle performance and, thus, their rational design for multiple applications, including drug delivery.

Controlled Amphiphilicity and Thermo-Responsiveness of Functional Copolymers Based on Oligo(Ethylene Glycol) Methyl Ether Methacrylates

Controlled Amphiphilicity and Thermo-Responsiveness of Functional Copolymers Based on Oligo(Ethylene Glycol) Methyl Ether Methacrylates

Four-Component Statistical Copolymers by RAFT Polymerization.

This manuscript serves as the starting point for in-depth research of multicomponent, statistical, methacrylate-based copolymers that potentially mimic the behavior of proteins in aqueous solutions. These synthetic macromolecules are composed of specially chosen comonomers: methacrylic acid (MAA), oligoethylene glycol methyl ether methacrylate (OEGMA475), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and benzyl methacrylate (BzMA). Monomer choice was based on factors such as the chemical nature of pendant functional groups, the polyelectrolyte/polyampholyte and amphiphilic character and the overall hydrophobic-hydrophilic balance (HLB) of the obtained quaterpolymers. Their synthesis was achieved via a one-pot reversible addition fragmentation chain transfer (RAFT) polymerization in two distinct compositions and molecular architectures, linear and hyperbranched, respectively, in order to explore the effects of macromolecular topology. The resulting statistical quaterpolymers were characterized via 1H-NMR and ATR-FTIR spectroscopies. Their behavior in aqueous solutions was studied by dynamic (DLS) and electrophoretic light scattering (ELS) and fluorescence spectroscopy (FS), producing vital information concerning their self-assembly and the structure of the formed aggregates. The physicochemical studies were extended by tuning parameters such as the solution pH and ionic strength. Finally, the quaterpolymer behavior in FBS/PBS solutions was investigated to test their colloid stability and biocompatibility in an in vivo-mimicking, biological fluid environment.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with β-Cyclodextrin.

This study investigates unexpected competitive host-guest interactions of β-cyclodextrin (β-CD), which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) and poly(glycerol mono methacrylate). Systematic structural modifications of the polymer provide insight into the host-guest interaction with β-CD and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer polymerization or intentionally implemented molecular recognition units such as arylazopyrazole photoswitches.

Synergistic Drug-Loaded Shear-Thinning Star Polymer Hydrogel Facilitates Gastrointestinal Lesion Resection and Promotes Wound Healing.

Easy injection, long-lasting barrier, and drug loading are the critical properties of submucosal injection materials for endoscopic surgery. However, conventional injectable polymers face challenges in simultaneously attaining these properties due to the inherent conflict between injectability and in situ stability. Here, a multi-arm star polymer hydrogel (denoted as βCP hydrogel) with long-lasting submucosal barrier (exceeding 120 min), rapid hemostasis, and sustained antibacterial properties is successfully developed by grafting poly(oligo(ethylene glycol) methyl ether methacrylate)(PEGMA) side-chains from β-CD via atom transfer radical polymerization (ATRP). During the onset of shearing, βCP hydrogel experiences the unwinding of polymer side-chains between neighboring star polymers, which facilitates the process of endoscopic injectability. After submucosal injection, βCP hydrogel undergoes the winding of polymer side-chains, thereby establishing a long-lasting barrier cushion. Meanwhile, owing to its distinctive structures with a hydrophobic inner cavity and an outer layer of hydrophilic polymer side-chains, βCP hydrogel enables simultaneous loading and on-demand release of diverse categories ofdrugs. This unique performance can adapt to the diverse demands during different stages of wound healing in a porcine endoscopic surgery model. These results indicate an appealing prospect for new application of star polymers as a good submucosal injection material in endoscopic treatments.

Theranostic Bottle-Brush Polymers Tailored for Universal Solid-Tumor Targeting.

Designing an efficient nanocarrier to target multiple types of cancer remains a major challenge in the development of cancer nanomedicines. The majority of systemically administered nanoparticles (NPs) are rapidly cleared by the liver, resulting in poor tumor-targeting efficiency and severe side effects. Here, we present a delicately tailored design and synthesis of fluorescent bottle-brush polymers and screen nine derived NPs, each varying in size and surface coatings, for tumor imaging and targeted delivery. Our optimized polymer bearing (oligo(ethylene glycol) methyl ether methacrylate) in the side chains shows reduced macrophage uptake, prolonged blood-circulation time (up to 27 h), and exceptionally high accumulation in the tumor compared to the liver, elucidating an immune-evasion-induced tumor-targeting mechanism. High tumor accumulation significantly improved the antitumor efficacy. The outstanding tumor-targeting ability has been further validated across five distinct tumor models, including orthotopic glioblastoma and pancreatic cancer, which demonstrate the universality of our polymeric nanocarrier for tumor-targeting delivery.

ABC block copolymer micelles driving the thermogelation: Scattering, imaging and spectroscopy

Thermoresponsive polymers have attracted much scientific attention due to their capacity for temperature-driven hydrogel formation. For biomedical applications, such as drug delivery, this transition should be tuned below body temperature to facilitate controlled and targeted drug release. We have recently developed a thermoresponsive polymer that forms gel at low concentrations (2 w/w%) in aqueous media and offers a cost-effective alternative to thermoresponsive systems currently being applied in clinics. This polymer is an ABC triblock terpolymer, where A, B, and C correspond to oligo(ethylene glycol) methyl ether methacrylate with average Mn 300 g mol−1 (OEGMA300), n-butyl methacrylate (BuMA), and di(ethylene glycol) methyl ether methacrylate (DEGMA). To investigate the self-assembly and the gelation mechanism in diluted solutions, we used small-angle neutron scattering (SANS) on 1 w/w% (below the gelation concentration) and 5 w/w% solutions (above the gelation concentration). As a comparison, we also investigated the solutions of the most studied thermoresponsive polymer, namely, Pluronic F127, an ABA triblock bipolymer made of ethylene glycol (A) and propylene glycol (B) blocks. SANS revealed that the in-house synthesised polymer forms elliptical cylinders, whose length increases significantly with temperature. In contrast, Pluronic F127 solutions form core-shell spherical micelles, which slightly elongate with temperature. Transmission electron microscopy images support the SANS findings, with tubular/worm structures being present. Variable-temperature circular dichroism (CD) and proton nuclear magnetic resonance (1H NMR) spectroscopy experiments reveal insights on the tacticity, structural changes, and molecular origin of the self-assembly.

Anthrapyrazolone functionalized Oligo(ethylene glycol)methyl ether methacrylates based fluorescent polymeric hydrogel for selective detection of Tetracycline drug

Tetracycline (TC) antibiotics are essential for treating bacterial infections; however, overuse and improper disposal place the environment in danger and promote the growth of drug-resistant microorganisms. Monitoring their impact on living organisms is vital. Polymeric-based hydrogels offer promise in antibiotic detection due to their versatility and biocompatibility, despite their uncommon use for this purpose. In this study, we have synthesized a fluorescent polymeric hydrogel, P(OEGMA-co-DIMA) utilizing oligo(ethylene glycol)methyl ether methacrylates (OEGMA) and laboratory-synthesized fluorescent anthrapyrazolone containing monomer, 2-(benzo[1,2,3-cd:4,5,6-c’d]bis(indazole)-2(7H)-yl)ethyl methacrylate (DIMA) for the fluorometric detection of TC in the aqueous medium. The P(OEGMA-co-DIMA) hydrogel exhibited exceptional affinity towards TC while exhibiting high selectivity. The chemosensing behavior of the hydrogel was also compared with the DIMA monomer. Upon adding TC, emission analysis revealed a notable quenching in the emission intensity of the P(OEGMA-co-DIMA) hydrogel as well as the DIMA monomer. The Stern Volmer rate constants (Ksv) of the hydrogel (Ksv = 9.99 x 103 M−1) in water and DIMA (Ksv = 25.63 x 103 M−1) in acetonitrile showed a higher quenching rate constant with a limit of detections (LODs) of 1.3 nM and 0.11 nM. Turn-off fluorescence behavior occurs via a static quenching mechanism through a photoinduced electron transfer process and intermolecular hydrogen bonding. To validate the selectivity, the interference analyses in an aqueous medium with different antibiotics are provided. To rationalize the real-time applicability of the hydrogel, studies were extended to water samples obtained from deionized water, tap water, lake water, and also in milk samples. The recovery rate and LOD for real samples ranged from 83.8% to 111% and 0.83 to 3.6 nM, respectively.

Influence of Polymer Side Chain Size and Backbone Length on the Self-Assembly of Supramolecular Polymer Bottlebrushes.

Hydrogen bonds are a versatile tool for creating fibrous, bottlebrush-like assemblies of polymeric building blocks. However, a delicate balance of forces exists between the steric repulsion of the polymer chains and these directed supramolecular forces. In this work we have systematically investigated the influence of structural parameters of the attached polymers on the assembly behaviour of benzene trisurea (BTU) and benzene tris(phenylalanine) (BTP) conjugates in water. Polymers with increasing main chain lengths and different side chain sizes were prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA), tri(ethylene glycol) methyl ether acrylate (TEGA) and oligo(ethylene glycol) methyl ether acrylate (OEGA). The resulting structures were analyzed using small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Both BTU and BTP formed fibres with PHEA attached, but a transition to spherical morphologies was observed at degrees of polymerisation (DP) of 70 and above. Overall, the main chain length appeared to be a dominating factor in inducing morphology transitions. Increasing the side chain size generally had a similar effect but mainly impeded any aggregation as is the case of POEGA. Interestingly, BTP conjugates still formed fibres, suggesting that the stronger intermolecular interactions can compensate partially for the steric repulsion.

Gem-bisphosphonic acid-based double hydrophilic block copolymers: RAFT synthesis and comparative assembly with gadolinium ions for the formation of MRI contrast agents

The synthesis of double hydrophilic block copolymers (DHBCs) with one block containing bisphosphonic acid groups was performed by aqueous RAFT polymerization with two approaches, either starting from a PEO-based macro-chain transfer agent (macro-CTA) or by chain extension of a RAFT-capped bisphosphonic acrylate homopolymer with oligo(ethylene glycol) methyl ether acrylate (OEGA). By complexation with gadolinium and europium ions, these polymers are prone to form hybrid polyionic complexes (HPICs) as evidenced by mono- and multi-angle DLS, TEM and luminescence measurements. The obtained HPICs showed better chemical stability at low pH values compared to previously reported counterparts based on carboxylic and monophosphonic acid groups (i.e., PEO-b-PAA and PEO-b-PVPA respectively). Due to their high relaxivity values, the proposed HPICs show potential as contrast agents for magnetic resonance imaging (MRI).

Dendritic Polymer-Based Nanomedicines Remodel the Tumor Stroma: Improve Drug Penetration and Enhance Antitumor Immune Response.

The dense extracellular matrix (ECM)insolidtumors, contributed by cancer-associated fibroblasts (CAFs), hinders penetration of drugs and diminishes their therapeutic outcomes. A sequential treatment strategy of remodeling the ECM via a CAF modifier (dasatinib, DAS) is proposed to promote penetration of an immunogenic cell death (ICD) inducer (epirubicin, Epi) via apoptotic vesicles, ultimately enhancing the treatment efficacy against breast cancer. Dendritic poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA)-based nanomedicines (poly[OEGMA-Dendron(G2)-Gly-Phe-Leu-Gly-DAS] (P-DAS) and poly[OEGMA-Dendron(G2)-hydrazone-Epi] (P-Epi)) are developed for sequential delivery of DAS and Epi, respectively. P-DAS reprograms CAFs to reduce collagen by downregulating collagen anabolism and energy metabolism, thereby reducing the ECM deposition. The regulated ECM can enhance tumor penetration of P-Epi to strengthen its ICD effect, leading to an amplified antitumor immune response. In breast cancer-bearing mice, this approach alleviates the ECM barrier, resulting in reduced tumor burden and increased cytotoxic T lymphocyte infiltration, and more encouragingly, synergizes effectively with anti-programmed cell death 1 (PD-1) therapy, significantly inhibiting tumor growth and preventing lung metastasis. Furthermore, systemic toxicity is barely detectable after sequential treatment with P-DAS and P-Epi. This approach opens a new avenue for treating desmoplastic tumors by metabolically targeting CAFs to overcome the ECM barrier.

Flowmicro In-Line Analysis-Driven Design of Reactions Mediated by Unstable Intermediates: Flash Monitoring Approach.

The direct observation of reactive intermediates is an important issue for organic synthesis. However, intermediates with an extreme instability are hard to be monitored by common spectroscopic methods such as FTIR. We have developed synthetic method utilizing flow microreactors, which enables a generation and reactions of unstable intermediates. Herein we report that, based on our flowmicro techniques, we developed an in-line analysis method for reactive intermediates in increments of milliseconds. We demonstrated the direct observation of the living and dead species of the anionic polymerization of alkyl methacrylates. The direct information of the living species enabled the anionic polymerization and copolymerization of oligo(ethylene glycol) methyl ether methacrylates, which is the important but difficult reaction in the conventional method.

Location of a Hydrophobic Load in Poly(oligo(ethylene glycol) methyl ether methacrylate)s (PEGMAs) Dissolved in Water and Probed by Fluorescence.

Two series of pyrene-labeled poly(oligo(ethylene glycol) methyl ether methacrylate)s referred to as PyEG5-PEGnMA and PyC4-PEGnMA were prepared to probe the region surrounding the polymethacrylate backbone by using the fluorescence of the dye pyrene. PyEG5-PEGnMA and PyC4-PEGnMA were prepared by copolymerizing the EGnMA methacrylate monomers with penta(ethylene glycol) 1-pyrenemethyl ether methacrylate or 1-pyrenebutyl methacrylate, respectively. In organic solvents, the much longer 18 non-hydrogen atom linker connecting the pyrene moieties to the polymethacrylate backbone in the PyEG5-PEGnMA samples enabled the deployment of the pyrenyl labels into the solution. In water, however, an excited pyrene for PyEG5-PEGnMA was found to probe a same volume as for the PyC4-PEGnMA samples where a much shorter 6 non-hydrogen atom spacer connected pyrene to the backbone. Another surprising observation, considering that the hydrophobicity of pyrene induces strong pyrene aggregation for many pyrene-labeled water-soluble polymers (Py-WSPs) in water, was the little pyrene aggregation found for the PyEG5-PEGnMA and PyC4-PEGnMA samples in water. These effects could be related to the organic-like domain (OLD) generated by the oligo(ethylene glycol) side chains densely arranged around the polymethacrylate backbone of the polymeric bottlebrush (PBB). Additional fluorescence experiments conducted with the penta(ethylene glycol) 1-pyrenemethyl ether derivative indicated that the cylindrical OLD surrounding the polymethacrylate backbone had a chemical composition similar to that of ethylene glycol. Binding of hydrophobic pyrene molecules to unlabeled PEGnMA bottlebrushes in water further supported the existence of the OLD. The demonstration, that PEGnMA samples form an OLD in water, which can host and protect hydrophobic cargoes like pyrene, should lead to the development of improved PEGnMA-based drug delivery systems.

A Nanocomposite Dynamic Covalent Cross-Linked Hydrogel Loaded with Fusidic Acid for Treating Antibiotic-Resistant Infected Wounds.

Methicillin-resistant Staphylococcus aureus (MRSA) is associated with high levels of morbidity and is considered a difficult-to-treat infection, often requiring nonstandard treatment regimens and antibiotics. Since over 40% of the emerging antibiotic compounds have insufficient solubility that limits their bioavailability and thus efficacy through oral or intravenous administration, it is crucial that alternative drug delivery products be developed for wound care applications. Existing effective treatments for soft tissue MRSA infections, such as fusidic acid (FA), which is typically administered orally, could also benefit from alternative routes of administration to improve local efficacy and bioavailability while reducing the required therapeutic dose. Herein, we report an antimicrobial poly(oligoethylene glycol methacrylate) (POEGMA)-based composite hydrogel loaded with fusidic acid-encapsulating self-assembled polylactic acid-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (PLA-POEGMA) nanoparticles for the treatment of MRSA-infected skin wounds. The inclusion of the self-assembled nanoparticles (380 nm diameter when loaded with fusidic acid) does not alter the favorable mechanical properties and stability of the hydrogel in the context of its use as a wound dressing, while fusidic acid (FA) can be released from the hydrogel over ∼10 h via a diffusion-controlled mechanism. The antimicrobial studies demonstrate a clear zone of inhibition in vitro and a 1-2 order of magnitude inhibition of bacterial growth in vivo in an MRSA-infected full-thickness excisional murine wound model even at very low antibiotic doses. Our approach thus can both circumvent challenges in the local delivery of hydrophobic antimicrobial compounds and directly deliver antimicrobials into the wound to effectively combat methicillin-resistant infections using a fraction of the drug dose required using other clinically relevant strategies.

Phase Behavior and Conformational Asymmetry near the Comb-to-Bottlebrush Transition in Linear-Brush Block Copolymers.

This study explores how conformational asymmetry influences the bulk phase behavior of linear-brush block copolymers. We synthesized 60 diblock copolymers composed of poly(trifluoroethyl methacrylate) as the linear block and poly[oligo(ethylene glycol) methyl ether methacrylate] as the brush block, varying the molecular weight, composition, and side-chain length to introduce different degrees of conformational asymmetry. Using small-angle X-ray scattering, we determined the morphology and phase diagrams for three different side-chain length systems, mainly observing lamellar and cylindrical phases. Increasing the side-chain length of the brush block from three to nine ethylene oxide units introduces sufficient asymmetry between the blocks to alter the phase behavior, shifting the lamellar-to-cylindrical transitions toward lower brush block compositions and transitioning the brush block from the dense comb-like regime to the bottlebrush regime. Coarse-grained simulations support our experimental observations and provide a mapping between the composition and conformational asymmetry. A comparison of our findings to strong stretching theory across multiple phase boundary predictions confirms the transition between the dense comb-like regime and the bottlebrush regime.

Oligo(ethylene glycol) methyl ether methacrylate based hydrogel with intrinsic antibacterial activity against Pseudomonas aeruginosa as a model of a major wound infecting human pathogen

Wound dressings represent the first important defense line against potentially life-threatening infections. Successful materials should unify efficiency, simplicity of production with the ease of application. Cationic polymers based on quaternary ammonium salt moieties along the polymer chain promise high efficacy against growth of relevant pathogens including drug-resistant strains. We present a novel and easy-to-handle wound dressing material based on the well-defined copolymers of oligo(ethylene glycol) methyl ether methacrylate (OEGMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA), using quaternization with 1,6-dibromohexane for hydrogel formation. The material obtained from this robust approach was perfectly biocompatible with human dermal fibroblasts and revealed an auspicious degree of intrinsic antibacterial activity against P. aeruginosa as a model pathogen for hospital-acquired infections. Formation of bacterial biofilms was prevented in early- and late-stages and even planktonic cells were killed upon gel contact. The rheological properties of the hydrogel materials were comprehensively characterized in both dry and swollen states. Excellent biological performance and appropriate viscoelastic properties qualify the hydrogels from our production approach as truly promising novel wound dressing materials with long-lasting and contact-active bactericidal activities. We believe that this charmingly simple procedure and the mechanical properties of the hydrogel may open new avenues towards cost-effective next-generation first-line wound-care materials.

Design of Novel Types of Phosphorus-Containing Flame-Retardant Hybrid Solid Electrolytes with Enhanced Ionic Conductivities

Hybrid polymer/inorganic solid electrolytes have been considered one of the promising routes toward improved safety and higher energy density compared to today’s liquid electrolytes. Herein, flame-retardant phosphorus-containing random copolymers, namely poly(oligo(ethylene glycol) methyl ether methacrylate)-co-(dimethyl(methacryloyloxy)methyl phosphonate) (P(xPEGMA-co-yMAPC1)), were synthesized with different ratio of monomer compositions and further used as the polymer matrix. By mixing P(xPEGMA-co-yMAPC1) with lithium perchlorate (LiClO4) and acetonitrile (ACN), the solid polymer electrolytes were obtained after vacuum evaporation of ACN. Among the P(xPEGMA-co-yMAPC1) copolymer electrolytes, the P(9PEGMA-co-1MAPC1) with 10wt% LiClO4 presented an ionic conductivity of 1.0×10-4 S cm-1 at 60℃ and 3.1×10-5 S cm-1 at 30℃ and showed good flame-retardant performance compared to pure PPEGMA. The increase in MAPC1 content upgraded the flame-retardant performances but enhanced the glass transition temperature (Tg) of the copolymers, leading to a decrease in ionic conductivity. To further enhance the ionic conductivity of the copolymer electrolytes, hybrid polymer/inorganic solid electrolytes are synthesized by adding Li1.3Al0.3Ti1.7(PO4)3 (LATP) and SiO2 inorganic fillers, respectively. P(9PEGMA-co-1MAPC1) with 10wt% LATP exhibits a higher ionic conductivity of 1.4×10-4 S cm-1 at 60℃, while P(9PEGMA-co-1MAPC1) with SiO2 fillers show a lower ionic conductivity of 8.5×10-5 S cm-1 at 60. Finally, the cycling performances of hybrid solid electrolytes containing LiFePO4|P(9PEGMA-co-1MAPC1) + LiClO4 + LATP/SiO2|Li batteries were tested. The capacity reaches 164.2 mAh g−1 at 0.05 C, and the capacity retention reaches 90% after 200 cycles at 0.1 C. Figure 1

Development and Characterization of Thermoresponsive Smart Self-Adaptive Chitosan-Based Polymer for Wellbore Plugging.

To meet the escalating demand for oil and gas exploration in microporous reservoirs, it has become increasingly crucial to develop high-performance plugging materials. Through free radical grafting polymerization technology, a carboxymethyl chitosan grafted poly (oligoethylene glycol) methyl ether methyl methacrylate acrylic acid copolymer (CCMMA) was successfully synthesized. The resulting CCMMA exhibited thermoresponsive self-assembling behavior. When the temperature was above its lower critical solution temperature (LCST), the nanomicelles began to aggregate, forming mesoporous aggregated structures. Additionally, the electrostatic repulsion of AA chains increased the value of LCST. By precisely adjusting the content of AA, the LCST of CCMMA could be raised from 84.7 to 122.9 °C. The rheology and filtration experiments revealed that when the temperature surpassed the switching point, CCMMA exhibited a noteworthy plugging effect on low-permeability cores. Furthermore, it could be partially released as the temperature decreased, exhibiting temperature-switchable and self-adaptive plugging properties. Meanwhile, CCMMA aggregates retained their reversibility, along with thermal thickening behavior in the pores. However, more detailed experiments and analysis are needed to validate these claims, such as a comprehensive study of the CCMMA copolymer's physical properties, its interaction with the reservoir environment, and its performance under various conditions. Additionally, further studies are required to optimize its synthesis process and improve its efficiency as a plugging material for oil and gas recovery in microporous reservoirs.

Controlled swelling of biomaterial devices for improved antifouling polymer coatings

Nonspecific interactions between cells and implantable elastomers often leads to failure modes for devices such as catheters, cosmetic and reconstructive implants, and sensors. To reduce these interactions, device surfaces can be coated with hydrophilic polymers, where greater polymer density enhances antifouling properties. Although graft-from coating techniques result in higher density polymer films and lower fouling in controlled settings, simpler graft-to methods show similar results on complex implanted devices, despite limited density. To address the need for improved graft-to methods, we developed Graft then shrink (GtS) where elastomeric materials are temporarily swollen during polymer grafting. Herein, we demonstrate a graft-to based method for poly(oligo(ethylene glycol) methyl ether methacrylate) (pOEGMA) on swollen silicone, GtS, that enhances grafted polymer content and fouling resistance. Total grafted polymer content of pOEGMA on toluene swollen silicone increased over ~ 13 × compared to non-swollen controls, dependent on the degree of silicone swelling. Increases in total grafted polymer within the top 200 µm of the material led to bacterial and mammalian cell adhesion reductions of 75% and 91% respectively, compared to Shrink then Graft (StG) antifouling polymer coated controls. GtS allows for the simple 3D coating of swellable elastomers (e.g., silicone medical devices) with improved antifouling pOEGMA coatings.

Thermoresponsive Smart Copolymer Coatings Based on P(NIPAM-co-HEMA) and P(OEGMA-co-HEMA) Brushes for Regenerative Medicine.

The fabrication of multifunctional, thermoresponsive platforms for regenerative medicine based on polymers that can be easily functionalized is one of the most important challenges in modern biomaterials science. In this study, we utilized atom transfer radical polymerization (ATRP) to produce two series of novel smart copolymer brush coatings. These coatings were based on copolymerizing 2-hydroxyethyl methacrylate (HEMA) with either oligo(ethylene glycol) methyl ether methacrylate (OEGMA) or N-isopropylacrylamide (NIPAM). The chemical compositions of the resulting brush coatings, namely, poly(oligo(ethylene glycol) methyl ether methacrylate-co-2-hydroxyethyl methacrylate) (P(OEGMA-co-HEMA)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)), were predicted using reactive ratios of the monomers. These predictions were then verified using time-of-flight-secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS). The thermoresponsiveness of the coatings was examined through water contact angle (CA) measurements at different temperatures, revealing a transition driven by lower critical solution temperature (LCST) or upper critical solution temperature (UCST) or a vanishing transition. The type of transition observed depended on the chemical composition of the coatings. Furthermore, it was demonstrated that the transition temperature of the coatings could be easily adjusted by modifying their composition. The topography of the coatings was characterized using atomic force microscopy (AFM). To assess the biocompatibility of the coatings, dermal fibroblast cultures were employed, and the results indicated that none of the coatings exhibited cytotoxicity. However, the shape and arrangement of the cells were significantly influenced by the chemical structure of the coating. Additionally, the viability of the cells was correlated with the wettability and roughness of the coatings, which determined the initial adhesion of the cells. Lastly, the temperature-induced changes in the properties of the fabricated copolymer coatings effectively controlled cell morphology, adhesion, and spontaneous detachment in a noninvasive, enzyme-free manner that was confirmed using optical microscopy.