Soil Resources Research Articles

Towards Sustainable Productivity of Greenhouse Vegetable Soils: Limiting Factors and Mitigation Strategies.

Greenhouse vegetable production has become increasingly important in meeting the increasing global food demand. Yet, it faces severe challenges in terms of how to maintain soil productivity from a long-term perspective. This review discusses the main soil productivity limiting factors for vegetables grown in greenhouses and identifies strategies that attempt to overcome these limitations. The main processes leading to soil degradation include physical (e.g., compaction), chemical (e.g., salinization, acidification, and nutrient imbalances), and biological factors (e.g., biodiversity reduction and pathogen buildup). These processes are often favored by intensive greenhouse cultivation. Mitigation strategies involve managing soil organic matter and mineral nutrients and adopting crop rotation. Future research should focus on precisely balancing soil nutrient supply with vegetable crop demands throughout their life cycle and using targeted organic amendments to manage specific soil properties. To ensure the successful adoption of recommended strategies, socioeconomic considerations are also necessary. Future empirical research is required to adapt socioeconomic frameworks, such as Science and Technology Backyard 2.0, from cereal production systems to greenhouse vegetable production systems. Addressing these issues will enable the productivity of greenhouse vegetable soils that meet growing vegetable demand to be sustained using limited soil resources.

Use of In-Situ ESR Measurements for Mechanistic Studies of Free Radical Non-Catalytic Thermal Reactions of Various Unconventional Oil Resources and Biomass

The exhaustion of conventional light oils necessitates the shift towards unconventional sources such as biomass, heavy oil, oil shale, and coal. Non-catalytic thermal cracking by a free radical mechanism is at the heart of the upgrading, prior to refining into valuable products. However, thermal pyrolysis is hindered by the formation of asphaltenes, precursors to coke, limiting cracking, causing equipment fouling, and reducing product stability. Free radicals are inherently present in heavy fractions and are generated during thermal processes. This makes these reactive intermediates central to understanding these mechanisms and limiting coking. Electron spin resonance (ESR) spectroscopy facilitates such mechanistic studies. Over the past decade, there has been no review of using in-situ ESR for studying thermal processes. This work begins with a brief description of free radicals’ chain reactions during thermal reactions and the wealth of information ESR provides. We then critically review the literature that uses ESR for mechanistic studies in thermal pyrolysis of biomass, heavy oil, shales, and coal. We conclude that limited literature exist, and more investigations are necessary. The key findings from existing literature are summarized to know the current state of knowledge. We also explicitly highlight the research gaps.

Green Energy and Land Resources: COP27 Perspective of BRICS Economic Growth and Land Production

ABSTRACTIn contemporary times, managing land resources and green energy from the COP27 perspective is a burning issue, attracting the attention of policymakers and scholars to attaining sustainable economic growth. In emerging economies, the adoption of both green energy and land resources is rapidly increasing to encourage economic productivity. In this regard, the current research explores the impact of oil resource fluctuations on the economic growth of the BRICS economies. In addition, this research contemplates the role of technological innovation, energy efficiency, and gross capital formation during 1990–2021. Using several econometric approaches, the results indicate the variables' stationarity and the cointegration between variables. Since most of the study variables follow a nonnormal distribution, this work employs a novel moments quantile regression. The estimation outcomes revealed that oil resource fluctuations, energy efficiency, technological innovation, and gross capital formation are substantial economic performance and growth drivers. The robustness of the empirical model is also tested via parametric (robust least squares) and nonparametric (quantile regression) approaches. Bidirectional causality estimates are reported between these variables except for the oil resource fluctuations that unidirectionally cause economic performance. Based on these estimates, this research recommends the sustainable management of oil resources and further investment in energy efficiency and technological innovation to attain sustainable economic performance.

Alpine SOC and Microbial Community Assembly Were Buffered Through Soil Pore Structure Along an Altitudinal Gradient

ABSTRACTElevation changes influence various environmental factors including cloudiness, atmospheric density, and temperature. Previous studies on the effects of elevation on microbial communities and soil organic carbon (SOC) yielded inconsistent results. This study tried to reveal the distribution patterns of microbial communities and SOC concentrations, as well as their interactions with soil structure along an elevational gradient in the alpine region. We investigated six typical ecosystems along an elevational gradient on the north‐eastern Qinghai‐Tibet Plateau. Phospholipid fatty acid (PLFA) analysis and X‐ray computed tomography (CT) methods were used to quantify microbial abundance and pore structure of soils, respectively. The results demonstrated that SOC content and total PLFAs peaked in the meadow ecosystem. In the subsoil, total PLFAs, fungal, and bacterial PLFAs followed the U‐shape pattern with increasing elevation. In both topsoils and subsoils, the surface area density of pores increased with elevation, and it was found to be positively correlated with SOC and microbial abundance. Soil structure mainly affects the input and adsorption of root nutrients by altering the pore surface area, thereby regulating the enrichment of microorganisms. The impact of pore structure on microbes were more obvious in the topsoil than in the subsoil. Interactions among pore structure, soil properties, and environmental factors jointly affects the microbial communities, demonstrating that elevation indirectly affects microbial communities through soil resource regulation.

Synthesis of Polyacrylamide Nanomicrospheres Modified with a Reactive Carbamate Surfactant for Efficient Profile Control and Blocking

Urethane surfactants (REQ) were synthesized with octadecanol ethoxylate (AEO) and isocyanate methacrylate (IEM). Subsequently, reactive-carbamate-surfactant-modified nanomicrospheres (PER) were prepared via two-phase aqueous dispersion polymerization using acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and ethylene glycol dimethacrylate (EGDMA). The microstructures and properties of the nanomicrospheres were characterized and examined via infrared spectroscopy, nano-laser particle size analysis, scanning electron microscopy, and in-house simulated exfoliation experiments. The results showed that the synthesized PER nanomicrospheres had a uniform particle size distribution, with an average size of 336 nm. The thermal decomposition temperature of the nanomicrospheres was 278 °C, and the nanomicrospheres had good thermal stability. At the same time, the nanomicrospheres maintained good swelling properties at mineralization < 10,000 mg/L and temperature < 90 °C. Under the condition of certain permeability, the blocking rate and drag coefficient gradually increased with increasing polymer microsphere concentration. Furthermore, at certain polymer microsphere concentrations, the blocking rate and drag coefficient gradually decreased with increasing core permeability. The experimental results indicate that nanomicrospheres used in the artificial core simulation drive have a better ability to drive oil recovery. Compared with AM microspheres (without REQ modification), nanomicrospheres exert a more considerable effect on recovery improvement. Compared with the water drive stage, the final recovery rate after the drive increases by 23.53%. This improvement is attributed to the unique structural design of the nanorods, which can form a thin film at the oil–water–rock interface and promote oil emulsification and stripping. In conclusion, PER nanomicrospheres can effectively control the fluid dynamics within the reservoir, reduce the loss of oil and gas resources, and improve the economic benefits of oil and gas fields, giving them a good application prospect.

Geological and Engineering Integration Fracturing Design and Optimization Study of Liushagang Formation in Weixinan Sag

The Weixinan Sag in the Beibuwan Basin is rich in shale oil resources. However, the reservoirs exhibit rapid phase changes, strong compartmentalization, thin individual layers, and high-frequency vertical variations in the thin interbedded sandstone and mudstone. These factors can restrict the height of hydraulic fracture propagation. Additionally, the low-porosity and low-permeability shale oil reservoirs face challenges such as low production rates and rapid decline. To address these issues, the Plannar3D full 3D fracturing model was used to simulate hydraulic fracture propagation and to study the main controlling factors for fracture propagation in the second member of the Liushagang Formation. Based on the concept of geological–engineering integration, a sweet spot evaluation was conducted to identify reservoirs with relatively better brittleness, reservoir properties, and oil content as the fracturing targets for horizontal wells. The UFM model was then applied to optimize fracturing parameters. This study indicates that the matrix-type oil shale has a high clay mineral content, resulting in a low Young’s modulus and poor brittleness. This makes hydraulic fracture propagation difficult and leads to less effective reservoir stimulation. In contrast, hydraulic fractures propagate more easily in high-brittleness interlayer-type oil shale. Therefore, it is recommended to prioritize the extraction of shale oil from interlayer-type oil shale reservoirs. The difference in interlayer stress is identified as the primary controlling factor for cross-layer fracture propagation in the study area. Based on the concept of geological–engineering integration, a sweet spot evaluation standard was established for the second member of the Liushagang Formation, considering both reservoir quality and engineering quality. Four sweet spot zones of interlayer-type oil shale reservoirs were identified according to this evaluation standard. To achieve uniform fracture initiation, a differentiated segment and cluster design was implemented for certain high-angle sections of well WZ11-6-5d. Interlayer-type oil shale was selected as the fracturing target, and the UFM was used for hydraulic fracture propagation simulation. Fracturing parameters were optimized with a focus on hydraulic fracture characteristics and the estimated ultimate recovery (EUR). The optimization results were as follows: a single-stage length of 50 m, cluster spacing of 15 m, pump injection rate of 10 m3/min, fluid intensity of 25 m3/m, and proppant intensity of 3.5 t/m. The application of these optimized fracturing parameters in field operations resulted in successful fracturing and the achievement of industrial oil flow.

Differences in the Genesis and Sources of Hydrocarbon Gas Fluid from the Eastern and Western Kuqa Depression

The Kuqa Depression is rich in oil and gas resources and serves as a key production area in the Tarim Basin. However, controversy persists over the genesis of oil and gas in the various structural zones of the Kuqa Depression. This study employs natural gas composition analysis, gas carbon isotope analysis and gold pipe thermal simulation experiments, to comprehensively analyze the differences in the genesis and sources of hydrocarbon gas fluid from the eastern and western Kuqa Depression. The results show that the Kuqa Depression is dominated by alkane gas, with an average gas drying coefficient of 95.6, with nitrogen and carbon dioxide as the primary non-hydrocarbon gases. The average of δ13C1, δ13C2 and δ13C3 values in natural gas are −27.70‰, −20.43‰ and −21.75‰, respectively. Based on comprehensive natural gas geochemical maps, the CO2 in the natural gas from the Tudong and Dabei areas, as well as the KT-1 well of the Kuqa Depression, is thought to be of organic origin. Additionally, natural gas formation in the Tudong area is relatively simple, consisting entirely of thermally generated coal gas derived from the initial cracking of kerogen. The natural gas in the KT-1 well and the Dabei area are mixed gasses, formed by the initial cracking of kerogen from highly evolved lacustrine and coal-bearing source rocks, exhibiting characteristics resembling those of crude oil cracking gas. The methane (CH4) content of natural gas in the Dabei area is high and the carbon isotopes are unusually heavy. Considering the regional geological background, potential source rock characteristics and geochemical features may be related to the large-scale invasion of dry gas contributed by CH4 from highly evolved, underlying coal-bearing source rocks. Consequently, the CH4 content in the mixed gas is generally high (Ln (C1/C2) can reach up to 5.38), while the relative content of heavy components is low, though remains relatively unchanged. Thus, the map of the relative content of heavy components still reflects the characteristics of the original gas genesis (initial cracking of kerogen). Mixed-source gas was analyzed using thermal simulation experiments and natural gas composition ratio diagrams. The contributions of natural gas from deep, highly evolved coal-bearing source rocks in the KT-1 well and the Dabei area accounted for more than 90% and approximately 60%, respectively. This analysis provides theoretical guidance for natural gas exploration in the research area.

Integration of Isotopic and Nuclear Techniques to Assess Water and Soil Resources’ Degradation: A Critical Review

Integration of Isotopic and Nuclear Techniques to Assess Water and Soil Resources’ Degradation: A Critical Review

Incitis-food: Food security and environmental justice in African city regions

Incitis-food: Food security and environmental justice in African city regions Dr Buchenrieder, Dr Benjamin from the University of the Bundeswehr Munich, and Dr Radišić and MS.c. Trivunić, from Foodscale Hub, introduce the INCiTiS-FOOD project for improved food and nutrition security in African urban and peri-urban areas. With 20% of the population, ca. 282 million individuals, undernourished in Africa, the continent is facing a food and nutrition crisis of unprecedented proportions. This crisis intensifies further considering climate change as well as the state (i.e. quantity and quality) of arable land, soil, and water resources. There is an urgent need to provide nutritious and healthy food for the continent’s growing population while also taking into account the rapid urbanisation rate of 45%. So the question remains – what can be done to improve FNS in Africa’s growing city regions while reducing the food-system-related environmental footprint?

Preparation of molybdenum disulfide/bentonite nanohybrid and its tribological properties as lubricant for water-based drilling fluids

In recent years, with the increase in energy demand and gradual scarcity of medium and shallow oil and gas resources, oil and gas exploration has shifted to special wells such as deep wells, ultra-deep wells, and extended reach wells. These complex wellbore structures inevitably increase the torque and friction between the casing and the drill pipe during drilling, which aggravates friction and wear, and leads to accidents such as drill sticking and drill breakage in severe cases. In this study, molybdenum disulfide/bentonite (MoS2/Bent) nanohybrids as drilling fluid lubricant were synthesized by hydrothermal method using sodium molybdate (Na2MoO4) and thiourea (CH4N2S) as raw materials and bentonite as carrier. The as-synthesized MoS2/Bent nanohybrid was characterized by X-ray powder diffractometer, transmission electron microscopy, Fourier transform infrared spectroscopy, and the high temperature resistance and tribological properties of MoS2/Bent nanohybrid were evaluated in base slurry. The results show that the friction coefficient of MoS2/Bent nanohybrid drilling fluid before aging is reduced by 74 % and the wear rate is reduced by 97 % compared with the base slurry. After high-temperature aging at 240 °C, the friction coefficient is reduced by 77 % and the wear rate is reduced by 90 %. The excellent friction reducing and antiwear performance is attributed to the formation of low shear strength MoS2 deposition film and oxide tribofilm on the surface of the friction pair during the rubbing process.

Estimation of the Potential for Soil and Water Conservation Measures in a Typical Basin of the Loess Plateau, China

Abstract: In the context of the large-scale management of the Loess Plateau and efforts to reduce water and sediment in the Yellow River, this study focuses on a typical watershed within the Loess Plateau. The potential for vegetation restoration in the Kuye River Basin is estimated based on the assumption that vegetation cover should be relatively uniform under similar habitat conditions. The potential for terrace restoration is assessed through an analysis of topographic features and soil layer thickness, while the potential for silt dam construction is evaluated by considering various hydrological and geomorphological factors. Based on these assessments, the overall potential for soil erosion control in the watershed is synthesized, providing a comprehensive understanding of target areas for ecological restoration within the Kuye River Basin. The study demonstrates that the areas with the greatest potential for vegetation restoration in the Kuye River Basin are concentrated in the upper and middle reaches of the basin, which are in closer proximity to the river. The total potential for terracing is 1013.85 km2, which is primarily distributed across the river terraces, farmlands, and gentle slopes on both sides of the riverbanks. Additionally, the potential for the construction of check dams is 14,390 units. The target areas for terracing measures in the Kuye River Basin are primarily situated in the middle and lower reaches of the basin, which are in closer proximity to the river. Conversely, the target areas for forest, grass, and check dams, as well as other small watershed integrated management measures, are predominantly located in the hill and gully areas on the eastern and southern sides of the basin. The implementation of the gradual ecological construction of the watershed, based on the aforementioned objectives, will facilitate the protection, improvement, and rational utilization of soil, water, and other natural resources within the watershed.

Terminal deoxynucleotidyl transferase-mediated CRISPR sensing platform for simple and point-of-care detection of cobalt pollution

The excessive use of cobalt in various chemical industries and arbitrary discharge of industrial wastewater have led to increased cobalt pollution in soil and water resources, increasing the risk of human exposure to high concentrations of cobalt and necessitating an urgent need for on-site monitoring platform for cobalt pollution. In this study, the terminal deoxynucleotidyl transferase (TdT)-CRISPR platform has been developed. In this platform, cobalt as a cofactor of TdT, can significantly improve the tailing efficiency of TdT-mediated extension. Therefore, when cobalt is present, the detection probe can be extended with poly(T) tails through the TdT-mediated extension, which can be subsequently served as the DNA activator for Cas12a, leading to the cleavage of fluorescence reporter molecules and triggering turn-on fluorescence signals. Consequently, this dual amplification sensing strategy of TdT-CRISPR platform demonstrated exceptional sensitivity (0.83 nM) and high specificity for cobalt over other ions. Furthermore, the method was successfully employed for the detection of cobalt in tap water and river samples. CRISPR-lateral flow assays (CRISPR-LFAs) were evaluated in this study for the simple and point-of-care detection of cobalt pollution. The assays are capable of detecting cobalt concentrations as low as 50 nM, which is significantly lower than the environmental standards of 16.9 μM, through strip analysis with the naked eye. These results commonly suggest that the TdT-CRISPR platform holds significant promise for monitoring cobalt pollution, providing a robust and sensitive solution for on-site detection and contributing to the mitigation of cobalt contamination risks in environmental matrices.

Efficient sealing of cemented sheath: An oil-responsive self-healing latex with toughness enhancement for cement composites

The integrity of the cemented sheath is important to the safe exploration of oil and gas resources. Sealing failure of cement sheath will result in formation fluid channeling and pressure carryover in the annulus. The both toughening and oil-responsive self-healing latex (TOS) was prepared to achieve efficient sealing of cemented sheath, and prolong its service life. The structure and oil swelling behavior of TOS, its toughening and self-healing effects on hardened cement paste (HCP) were analyzed by comprehensive characterizations. Results demonstrated that TOS possessed excellent stability and an oil swelling rate of 1235 %. Cement specimens by curing 28d containing 8 % TOS exhibited a 27.8 % increase in flexural strength, a 48.7 % reduction in elasticity modulus and a 33.8 % reduction in brittleness coefficient. The addition of TOS can effectively improve the toughness of cement. The average pore size of specimens containing 8 % TOS admixture decreased to 9.17 nm. This indicates that TOS enhanced the structural density of cement materials. The crack about 103μm in the cracking specimens with 8 % TOS was almost healed, and the corresponding permeability was reduced 99.1 % after curing in oil. Adsorption and film formation of TOS can resist the cracking of cement sheath, and the oil swelling expansion of film in cement matrix can repair the cracked structure.

Slightly Saline Water Improved Physiology, Growth, and Yield of Tomato Plants in Yellow Sand Substrate

Efficient utilization of saline water and yellow sand resources can enhance water and soil resource management while boosting crop yields in Xinjiang. This study conducted a two-season field experiment in Alar City, Xinjiang, from March to July 2023 and August 2023 to January 2024. The objective was to examine the effects of different irrigation water salinities (2, 3, 4, 5, and 6 g·L−1) on the physiology, growth, and yield of sand-cultured tomatoes grown in yellow sand slag. Groundwater irrigation with salinity levels of 0.8–1 g·L−1 was used as the control (CK). The results showed that the salinity of the substrate gradually increased with the salinity of irrigation water in each treatment. The salt accumulation increased by 59.5%, 82.5%, and 99.5% at the end of the experiment for T3 (4 g·L−1), T4 (5 g·L−1), and T5 (6 g·L−1), respectively, compared to CK. As the salinity of irrigation water increased, plant height, stem thickness, chlorophyll content, net photosynthesis rate, stomatal conductance, transpiration rate, and total yield of tomato showed an increasing and then decreasing trend, in which the total tomato yield of the T2 (3 g·L−1) treatment was significantly increased by 35.2% compared with that of CK between the two seasons. In contrast, as the salinity of irrigation water increased, the inter-cellular CO2 concentration of tomato leaves showed a decreasing and then increasing trend, with the T2 treatment having the lowest inter-cellular CO2 concentration. Pathway analysis revealed that appropriate salinity levels increased tomato yield by regulating inter-cellular CO2 concentration. Based on these findings, a 3 g·L−1 salinity level is recommended for irrigating sand-cultured tomatoes to maximize yellow sand resource use, address freshwater shortages, and optimize water and soil management in the Xinjiang region.

Preparation of the sandwiched PS-SiO2-PVAc-SiO2 electrospinning fiber membrane with super-hydrophobic and self-cleaning and its performance in oil-water emulsion separation

Oil-water emulsion separation could improve the efficiency of oil resources and reduce environmental pollution. The efficiency of oil-water separation was directly affected by the surface hydrophobicity of the membrane and its reliability and reusability. Therefore, the construction of a reliable and reusable super-hydrophobic surface was very important. In this research, the EFM with sandwich structure of PS-SiO2-PVAc-SiO2 was easily fabricated by a three times liquid phase induction process and heat treatment. The PS-SiO2-PVAc-SiO2 EFM was first formed by a triple liquid phase induction process, then the EFM was heat-treated, the PVAc, which is a heat-sensitive material, resulting in SiO2 nanoparticles being welded onto PS fibers. The rolling contact angle experiment at an inclination of 8° proved that the PS-SiO2-PVAc-SiO2 EFM has super-hydrophobic properties. Meanwhile, the PS-SiO2-PVAc-SiO2 EFM showed excellent stability and reliability of super-hydrophobic properties after the EFM was washed or taped. In addition, the PS-SiO2-PVAc-SiO2 EFM had self-cleaning function and fine oil-water separation property. The oil-water separation efficiency was over 99.50 % and the flow rate was 68 L/m2h. After 5 times of oil-water separation, the flux and separation efficiency did not decrease significantly, which proved that the PS-SiO2-PVAc-SiO2 EFM could be reusable.

Maps of agrolandscape and ecological zoning of natural and natural-agricultural ecosystems of the Russian Federation

Agriculture has a large area of coverage and places the greatest burden on land, soil, water and biological resources in many countries of the world. Agricultural lands occupy huge areas in the world (4.8 billion hectares, or 37% of the land) and in Russia (221.9 million hectares, or 13% of the Russian Federation area). The agriculture best adapted to local conditions is the most beneficial one for people and nature. The main direction of agricultural adaptation is agrolandscape-ecological zoning. In order to provide information support for regionally, landscapeand ecologically differentiated agriculture and rational environmental management, an agrolandscape– ecological zoning of natural and natural-agricultural ecosystems was developed for the first time for all 11 natural-economic regions of Russia, namely, Northern, North-Western, Volga–Vyatka, Central, Central Black Earth, Volga, North Caucasus, Ural, West Siberian, East Siberian, and Far Eastern. The zoning was carried out using comparative geographical and agrolandscape-ecological methods, ecological-landscape and agroecological approaches. The contour and information basis for zoning is the map of Soil–Ecological zoning of the Russian Federation from the Faculty of Soil Science of Lomonosov Moscow State University. Maps of other types of zoning, numerous maps and atlases, statistical data, available literary and stock sources, ground-based and remote data were also used. Our sets of zoning materials included: a map, a map legend, 3 databases (land, forage lands, and negative processes), 2 classifications (forage lands, reindeer pastures, if any), articles, monographs, recommendations, and proposals for production. The maps have been compiled on a 1:2,500,000 scale on a modern, highly informative topographic cartographic basis for the map of Russian Federation. The maps show 6 types of boundaries, including 4 types of agrolandscape-ecological ones (taken from the Soil–Ecological Zoning map): 1) zones, 2) mountainous territories, 3) provinces, 4) districts and 2 types of administrative ones (available on the cartographic basis) of: 1) constituent entities of the Russian Federation, and 2) natural-economic regions.

Learnable dual attention fusion network for borehole distributed acoustic sensing systems data reconstruction

As the demand for nonrenewable oil and gas resources has increased, distributed acoustic sensing systems (DAS) have been widely used in the acquisition of vertical seismic profiles. Complicated subsurface conditions produce many types of noise with strong energy. The effective reflection and refraction signals are absorbed by the inelastic medium during the transmission process, resulting in significant energy loss and aliased frequency characteristics. However, satisfactory processing results and quality cannot be achieved through conventional denoising methods. In recent years, the rapid development of deep-learning methods with attention mechanisms has attracted significant attention. Noise reduction and signal reconstruction technologies with multiple attention mechanisms within the framework of joint-domain features have become important development directions in DAS data processing. An attention mechanism can help the network ignore useless information and pay attention to useful information in the same way that humans can. In this study, we discuss a novel learnable dual attention fusion network that combines local and patch-based nonlocal attention mechanisms based on ResBlock modules, making the extraction process of the network learnable and selective. In addition, the novel network can focus on local and global details. We also use a residual learning strategy to simplify the training process and gradually establish the best mapping based on the L2 loss function. All experimental results of the simulation and actual records show that our novel network has better denoising and effective signal restoration abilities. Moreover, it can recover the up-going and down-going wavefields and attenuate different types of noise with less effective energy loss.

Plant community richness and foliar fungicides impact soil Streptomyces inhibition, resistance, and resource use phenotypes.

Plants serve as critical links between above- and below-ground microbial communitites, both influencing and being influenced by microbes in these two realms. Below-ground microbial communities are expected to respond to soil resource environments, which are mediated by the roots of plants that can, in turn, be influenced by the above-ground community of foliar endophytes. For instance, diverse plant communities deposit more, and more diverse, nutrients into the soil, and this deposition is often increased when foliar pathogens are removed. Differences in soil resources can alter soil microbial composition and phenotypes, including inhibitory capacity, resource use, and antibiotic resistance. In this work, we consider plots differing in plant richness and application of foliar fungicide, evaluating consequences on soil resource levels and root-associated Streptomyces phenotypes. Soil carbon, nitrogen, phosphorus, potassium, and organic matter were greater in samples from polyculture than monoculture, yet this increase was surprisingly offset when foliar fungal communities were disrupted. We find that Streptomyces phenotypes varied more between richness plots-with the Streptomyces from polyculture showing lower inhibitory capacity, altered resource-use profiles, and greater antibiotic resistance-than between subplots with/without foliar fungicide. Where foliar fungicide affected phenotypes, it did so differently in polyculture than in monoculture, for instance decreasing niche width and overlap in monoculture while increasing them in polyculture. No differences in phenotype were correlated with soil nutrient levels, suggesting the need for further research looking more closely at soil resource diversity and particular compounds that were found to differ between treatments.

Analysis of spatial structure and singularity of microbial biogeochemical anomalies in the Taiwan Strait Basin

The abundance of specific hydrocarbon-oxidizing bacteria (MV value) in surface soil is closely linked to the concentration of thermogenic light hydrocarbons found in the underlying layers. The identification of these bacteria using specific detection techniques offers unique insights into microbiological anomalies associated with oil and gas, underscoring the significance of delineating microbiological geochemical anomalies in the exploration process. Accurate determination of the anomaly range is crucial for forecasting potential oil and gas reservoirs. In this study, a variety of fractal and geological statistical methods were employed to analyze microbiological geochemical data from the Taiwan Strait Basin. The multifractal approach allows for the simultaneous assessment of spatial autocorrelation and singularity in geochemical fields, with the fractal distribution reflecting the localized enrichment and depletion patterns of microbiological geochemical elements in rocks and other substrates. Geological statistical methods, such as the variation function, enable the assessment of spatial autocorrelation in geochemical and geophysical fields. The results indicate that microbiological anomalies in the Jiulongjiang Depression are mainly concentrated in the southwestern part of the study area, with some anomalies also observed in the central region. Conversely, microbiological anomalies in the Jinjiang Depression are predominantly located in the southern portion of the study area. Microbiological anomalies in the study area (Jinjiang Depression and Jiulongjiang Depression) exhibit a northeast-southwest strip distribution, aligning with the trend of the depressions and faults, suggesting that faults could influence the distribution of oil and gas resources in the region. Based on microbiological statistical analyses, the Jiulongjiang Depression shows better potential for oil and gas prospects compared to the Jinjiang Depression, guiding future research efforts in the Jiulongjiang Depression.

Prediction of wellbore gas hydrate generation based on temperature-pressure coupling model in deepwater testing

With the advancement of oil and gas exploration and development technology, the development of the world's oil and gas resources is gradually advancing from land and shallow waters to deep waters. During the development of gas wells in deepwater regions, the temperature of the wellbore decreases from the bottom of the well to the wellhead, and therefore, common well conditions of high pressure, low temperature, and the presence of free water are encountered, which can lead to gas hydrate plugging of the pipeline and affect the transportation of natural gas. Simulation of temperature and pressure along the wellbore and identification of gas hydrate-generating zones in the wellbore can be used to take timely preventive measures and minimize losses. In this study, a wellbore gas hydrate generation and prediction model is developed by combining the mass, momentum, and energy conservation equations, and the model is solved by the fourth-order Runge-Kutta method, taking into account the temperature-pressure coupling in the wellbore. The effects of gas production, specific heat capacity, thermal conductivity, tubing size, test duration, and ground temperature gradient on the location of gas hydrate generation and the amount of inhibitor used were analyzed in a case study well in the South China Sea. Some suggestions for practical engineering operations, such as increasing the gas production in moderation and choosing smaller tubing sizes within the acceptable range, were given. The study's results can provide a theoretical basis for flow assurance for hydrocarbon production in the wellbore of deepwater gas wells.