Occipitocervical Angle Research Articles

Surgical treatment of craniocervical instability: comparison of two constructs regarding clinical and radiological outcomes of 100 patients

PurposeThere is an increased demand for surgical solutions to treat craniocervical instability. This retrospective study demonstrates the clinical and radiological outcomes of unstable craniocervical junction treated with occipitocervical fusion.Material and methodsThe mean age of 52 females and 48 males was 56.89 years. The clinical and radiological outcomes were assessed, including NDI, VAS, ASIA score, imaging, complications and bony fusion in two used constructs: a modern occipital plate–rod–screw system (n = 59) and previous bilateral contoured titanium reconstruction plates–screws (n = 41).ResultsClinically and on imaging, patients presented with neck pain, myelopathy, radiculopathy, vascular symptoms and craniocervical instability. The mean follow-up was 6.47 years. A solid bony fusion was achieved in 93.81% of the patients. The NDI and the VAS improved significantly from 28.3 and 7.67 at the presentation to 16.2 and 3.47 at the final follow-up. The anterior and posterior atlantodental interval (AADI and PADI), the clivus canal angle (CCA), the occipitoaxial angle (OC2A) and the posterior occipitocervical angle (POCA) improved significantly. Six patients required early revision.ConclusionOccipitocervical fusion can yield excellent results regarding clinical improvement and long-term stability with a high fusion rate. Simple reconstruction plates, though more demanding surgically, achieve similar results. Preserving a neutral patient’s position for fixation avoids postoperative dysphagia and may help prevent adjacent segment disease development.

The Morphometry of the Cervical Vertebral Column in the Sagittal Plane: Comparing Methods for Determining Cervical Lordosis Angle

Background: The aims of this study were to: (i) to analyze the morphometric characteristics of the cervical vertebral column in the sagittal plane; and (ii) compare morphometric methods used for determinating cervical lordosis angle. Materials and Methods: Direct cervical sagittal radiographs of 175 adults were analyzed and cervical lordosis angle was evaluated by Cobb (C2-C7), central cervical lordosis angle, posterior tangent, and Risser & Ferguson methods. In addition, occipitocervical angle (occiput-C2) and cervical vertical tranlation distance were deter-mined to assess upper cervical lordosis and forward head posture, respectively. Results: The measured cervical lordosis angles were differed (p<0.05) depending on the measurement met-hod. There was a strong negative correlation between cervical lordosis angle and occipitocervical angle (r = -0.707), a weak negative correlation between cervical lordosis angle and cervical vertical translation distance (r = -0.253) and a moderate positive correlation between occipitocervical angle and cervical vertical translation distance (r = 0.552). It was observed that an increase of 1 mm in the cervical vertical translation distance cau-sed an increase in the occipitocervical angle about 0.6 degrees. Conclusions: In planning cervical surgery, the balance and alignment of the cervical vertebral column in the sagittal plane should be evaluated in detail. The contour of the cervical vertebral column in the sagittal plane and the limits of cervical lordosis angle are important in the evaluation of cervical pathologies. The obsserva-tions from this study will benefit the understanding of vertebral column morphometry will contribute to the literature in anatomy, physiotherapy, radiology, and cervical regional surgery. Key Words: Cervical lordosis angle, cervical vertebrae, morphometry, radiography, sagittal plane

Clinical application of a quantitative method of atlantoaxial reduction angle in basilar invagination

Objectives: To investigate the clinical application effect of a quantitative method of atlantoaxial reduction angle in basilar invagination. Methods: A retrospective analysis of clinical and radiographic data was conducted of 38 patients with complicated atlantoaxial dislocation and basilar invagination admitted to the Department of Neurosurgery, First Affiliated Hospital of Chongqing Medical University from May 2020 to May 2022. There were 5 males and 33 females, aged (53.5±9.9) years (range: 38 to 80 years). All patients underwent C1-2 interarticular fusion cage implantation+occipital-cervical fixation by pressing rob with the cantilever technique. The atlantoaxial reduction model of previous studies by our team was used to calculate the reduction angles before surgery. Then titanium rods of prebending angle were prepared according to the calculation before the operation. After that quantitative reduction of angle was performed during the operation. The paired t-test was used to compare the difference between the theoretical and actual reset value. Results: The theoretical reduction angle of all patients was (10.62±1.78)° (range: 6.40° to 13.20°), the actual reduction angle was (10.53±1.63)° (range: 6.70° to 13.30°) and there was no statistical difference between them (t=1.688, P=0.100). The theoretical posterior occipitocervical angle after the operation of all patients was (117.37±5.88)° (range: 107.00° to 133.00°), the actual posterior occipitocervical angle after the operation was (118.25±6.77)° (range: 105.40° to 135.80°) and there was no statistical difference between them (t=-0.737, P=0.466). The postoperative follow-up time of the patients was more than 6 months and the symptoms of all patients were relieved. All patients had satisfactory fusion between small joints without incision infection, internal fixation fracture, displacement, atlantoaxial redislocation, and other long-term complications. Conclusion: The quantitative method of atlantoaxial reduction angle in basilar invagination can calculate the theoretical reduction angle of the clivus axis angle and guide the preparation of the pre-bending titanium rod before surgery, so as to realize the quantification of the atlantoaxial reduction angle.

Outcomes of occipitocervical fixation and fusion in posttraumatic craniocervical instability

Background: in recent years, proper management of posttraumatic craniocervical instability is possible. However, there is a paucity of literature with long follow-up of these patients. Purpose: To assess outcomes after surgical treatment of posttraumatic instability with occipitocervical fixation with or without fusion. Methods: Among 20 patients with posttraumatic unstable craniocervical junction who underwent occipitocervical fixation there was an equal number of both females and males with a mean age of 62.85 ± 17.23 years. The outcomes of NDI, neck pain VAS, neurological assessment by ASIA score, imaging, complications, and bony fusion were assessed. Radiological assessment of anterior dental interval (ADI), posterior dental interval (PDI), and posterior Occipito cervical angle (POCA). RESULTS: Clinically all patients presented with neck pain and only one with tetraplegia. The mean follow-up was 90.8 months. A solid bony fusion was achieved in 100 % of the patients. The NDI and the VAS improved significantly from 26 ± 6.4 and 7.7 at the presentation to 15.3 and 3.6 at the final follow-up. The anterior and posterior atlantodental interval (AADI, PADI), and the posterior occipitocervical angle (POCA) improved significantly. One patient required early revision. CONCLUSION: Occipitocervical fixation with or without fusion can be considered a valuable option in the treatment of instability with a high fusion rate and fewer complications. Temporary occipital fixation may be considered with later removal but may be associated with unintended occipitoatlantal fusion.

Extension of decompression to C2 doesn’t affect the spinal sagittal parameters compared with standard open-door laminoplasty

We modified and extended laminoplasty to the upper cervical spine on patients with canal stenosis associated with upper cervical spinal ossified lesions. However, whether the extended decompression range of laminoplasty can cause further effects on cervical stability is rarely studied at present. A retrospective study to analyze the relationship between the surgical levels and cervical sagittal parameters effects was performed in patients with cervical spondylosis myelopathy who had undergone posterior cervical expansive open-door laminoplasty with/without extending to C2. In total, 64 patients were divided into 2 groups according to the surgical levels. Radiologic outcomes of occipito-cervical angle (C0-2 Cobb angle), CL C27 Cobb angle, cervical sagittal vertical alignment, T1-Slope (T1S), T1S minus CL (T1S-CL), spino-cranial angle and center of the sella turcica-C7 SVA (St-SVA) were evaluated on lateral X-rays of the cervical spine at pre-operation, post-operation, and 2-year follow-up. The patient's health-related quality of life was obtained including neck disability index, Japanese orthopaedic association scores, and visual analog scale. Changes in sagittal parameters were observed in both groups after surgery. T1S, cervical sagittal vertical alignment, and T1S-CL significantly increased and CL decreased in 2 groups of patients postoperative. After a 2-year follow-up period, the C0-2 Cobb angle was found to increase compared to preoperative records. In addition, there were no significant differences in spino-cranial angle and st-SVA between preoperative and 2 years follow-up measurements. Health-related quality of life was improved in both groups and was not significantly different. Herein, the parameters indicated a tilting forward of the lower cervical spine and a more lordotic upper cervical spine to maintain a horizontal gaze in patients. However, C2 to 7 laminoplasty was performed to achieve satisfactory clinical results without significantly changing the spinal sagittal parameters.

Research on effectiveness of occipito-odontoid angle in predicting dysphagia after occipitocervical fusion in patients with C 2, 3 Klippel-Feil syndrome

To introduce a new occipitocervical angle parameter, occipito-odontoid angle (O-Da), for predicting dysphagia after occipitocervical fusion (OCF) in patients with C 2, 3 Klippel-Feil syndrome (KFS) and analyze its effectiveness. A total of 119 patients met selective criteria between April 2010 and November 2019 were retrospectively included as the study subjects. There were 56 males and 63 females. The age ranged from 14 to 76 years, with a median age of 51 years. There were 44 cases of basilar invagination and 75 cases of atlantoaxial subluxation. Forty patients were combined with C 2, 3 KFS. Seven patients underwent anterior decompression combined with posterior OCF and 112 patients underwent posterior OCF. The fixed segments were O-C 2 in 36 cases, O-C 3 in 51 cases, O-C 4 in 25 cases, and O-C 5 in 7 cases. All patients were followed up 21-136 months, with a median time of 79 months. The lateral cervical X-ray films before operation and at last follow-up were used to measure the occipital to C 2 angle (O-C 2a), the occipital and external acoustic meatus to axis angle (O-EAa), the occipital protuberance to axial angle (Oc-Axa), the O-Da, and the narrowest oropharyngeal airway space (nPAS). The differences of the above parameters between the last follow-up and the preoperative values were calculated (represented as dO-C 2a, dO-EAa, dOc-Axa, dO-Da, and dnPAS). Patients were divided into two groups according to whether they suffered dysphagia after operation, and the differences in clinical data and radiographic parameters were compared between the two groups. The correlation between occipitocervical angle parameters and nPAS in 40 patients with C 2, 3 KFS was analyzed respectively. In addition, sensitivity and specificity analyses were used to assess the effectiveness of dO-Da≤-5° for the prediction of postoperative dysphagia. Thirty-one patients (26.1%) suffered dysphagia after OCF (dysphagia group), including 10 patients with C 2, 3 KFS; no dysphagia occurred in 88 patients (non-dysphagia group). There was no significant difference in age, follow-up time, fixed segment, proportion of patients with rheumatoid arthritis, proportion of patients with atlantoaxial subluxation, and proportion of patients with C 2, 3 KFS between the two groups ( P>0.05). The proportion of female patients was significantly higher in dysphagia group than in non-dysphagia group ( χ 2=7.600, P=0.006). The difference in preoperative O-C 2a between the two groups was significant ( t=2.528, P=0.014). No significant differences were observed in preoperative O-EAa, Oc-Axa, O-Da, and nPAS ( P>0.05). There was no significant difference in dO-C 2a, dO-EAa, dOc-Axa, dO-Da, and dnPAS between the two groups ( P>0.05). The dO-C 2a, dO-EAa, dOc-Axa, and dO-Da were positively correlated with dnPAS in 40 patients with C 2, 3 KFS ( r=0.604, P<0.001; r=0.649, P<0.001; r=0.615, P<0.001; r=0.672, P<0.001). Taking dO-Da≤-5° as the standard, the sensitivity and specificity of dO-Da to predict postoperative dysphagia in patients with C 2, 3 KFS were 80.0% (8/10) and 93.3% (28/30), respectively. The dO-Da is a reliable indicator for predicting dysphagia after OCF in patients with C 2, 3 KFS.

Relationship between cervical angle and temporomandibular disorders in young and middle-aged population

ABSTRACT Objective To verify temporomandibular disorders (TMDs) and cervical angles in a young and middle-aged population. Methods Ninety participants were included, 45 of whom had TMDs. The participants were diagnosed according to the Research Diagnostic Criteria for TMDs. Lateral cervical radiographs were taken, and relevant cervical angles were measured. The general characteristics of the TMD group and control group were analyzed using chi-square analysis, and the relationship between cervical angles and TMDs was evaluated using the unpaired t-test. Results The decrease in C2–C7 Cobb and increase in the posterior occipitocervical angle (POCA) were associated with the incidence of TMDs (p < 0.0001). Conclusion This study revealed that the cervical angle was related to TMDs. People with a long-time habit of head bending posture had a decrease in C2–C7 Cobb and an increase in the POCA. This group of people was more likely to develop TMDs.

Safety, efficacy, surgical, and radiological outcomes of short segment occipital plate and C2 transarticular screw construct for occipito-cervical instability.

Objective:Our study aims to assess the safety, efficacy, clinicoradiological, functional, neurological outcomes, and complications of posterior occipitocervical fixation using an occipital plate and C1-2 transarticular screw (TAS) construct.Study Design:This was a retrospective analysis of prospectively collected data.Methods:Data of 27 patients who underwent occipital plate and C1-2 TAS construct at a single institute from 2010 to 2015 were collected and analyzed. Demographics, clinical parameters (Visual Analog Score, Oswestry Disability Index, and modified JOA score), radiological parameters – mean atlantodens interval, posterior occipitocervical angle, occipitocervical-2 angle, surgical parameters (operative time, blood loss, hospital stay, and fusion), and complications were evaluated.Results:The mean age of the patients was 54.074 ± 16.52 years (18–81 years), the mean operative time was 116.29 ± 12.23 min, and the mean blood loss was 196.29 ± 38.94 ml. The mean hospital stay was 5.22 ± 1.28 days. The mean ± standard deviation follow-up duration was 62.52 ± 2.27 months. There was a significant improvement in clinical parameters and radiological parameters postoperatively. One patient with implant failure, one patient with pseudoarthrosis, one with neurological deterioration, two wound complications, and two dural tears were noted.Conclusion:Posterior occipitocervical reconstruction with O-C1-2 TAS construct provided excellent clinical outcomes, radiological outcomes, optimal correction of malalignment in the occipitocervical region, and with biomechanically sound fixation. Extending the instrumentation into the subaxial spine will lead to a decrease in the range of motion, increased surgical time, blood loss, more extensive muscle damage, and also increase the costs.

Quantitative Reduction of Basilar Invagination With Atlantoaxial Dislocation by a Posterior Approach.

ObjectiveThis study evaluated the feasibility and efficacy of quantitative reduction and fixation to treat basilar invagination (BI) with atlantoaxial dislocation (AAD). MethodsPosterior occipitocervical angle (POCA), occiput–C2 angle (Oc–C2A), clivusaxial angle (CAA), and C2–7 angle (C2–7A) were considered for quantitative reduction. Twelve patients with BI complicated with AAD received posterior interarticular release and individualized cage implantation to restore vertical dislocation. The POCA was adjusted using cantilever technology to further reduce the horizontal dislocation and adjust lower cervical vertebral angle. All patients received a radiological follow-up for ≥12 months. Improvements in spinal cord function were evaluated using Japanese Orthopedic Association (JOA) score. ResultsAll the patients received successful quantitative reduction for BI-AAD, and bony fusion was achieved without spinal cord injury after surgery for 12 months. The JOA score was improved significantly to 15.2 ± 0.9 twelve months after surgery (p < 0.01). Radiological follow-up revealed that individualized cage and POCA play vital roles in quantitative correction: (1) distance of the dens above McRae’s line and atlantodens interval were restored to normal level, respectively; (2) changes in Oc–C2 angle (ΔOc–C2A), C2–7 angle (ΔC2–7A), clivus-axial angle (ΔCAA), and POCA (ΔPOCA) were all caused by changes in axis tilt. Based on the changes of radiological parameter we deduced the formula for quantitative reduction by linear regression analysis: -ΔPOCA = ΔOc–C2A = -ΔC2–7A = ΔCAA.ConclusionQuantitative posterior reduction by individualized cage and adjusting ΔPOCA is feasible for treating BI with AAD.

Is it Suitable to Fix the Occipito-C2 Angle and the Posterior Occipitocervical Angle in a Normal Range During Occipitocervical Fusion?

This is a retrospective study. The objective of this study was (1) to measure the occipito-C2 angle (OC2A) and the posterior occipitocervical angle (POCA) in a normal population, and (2) to observe the effects of OC2A and POCA selection on postoperative clinical efficacy and lower cervical curvature after occipitocervical fusion (OCF) in patients with basilar invagination (BI) and atlantoaxial fracture and dislocation (AAFD). OC2A has received special attention with respect to the clinical efficacy during OCF. However, none of studies have focused on the relationship between OC2A and POCA and have assessed their impact on clinical outcomes in patients with different occipiocervical diseases. One hundred fifty healthy subjects without any cervical disease (healthy group) were randomly selected based on sex and age. Three spine surgeons measured the OC2A and POCA in the healthy group and averaged the values. Forty-two patients with BI (BI group) and 32 patients with AAFD (AAFD group) who underwent OCF between January 2012 and January 2017 were reviewed. OC2A, POCA, and cervical spinal angle (CSA) were measured preoperatively, postoperatively immediately after surgery and ambulation, and at the final follow-up visit. The preoperative and final follow-up visual analog scale (VAS), Japanese Orthopaedic Association score (JOA), neck disability index (NDI), and the change of CSA from postoperatively immediately after surgery and ambulation to the final follow-up (dCSA) were recorded. The values of OC2A and POCA were 14.5±3.7 and 108.2±8.1 degrees in the healthy group, respectively, and the respective 95% confidence intervals were 7.2-21.8 and 92.3-124.0 degrees as the normal range. There was a negative correlation between OC2A and POCA (r=-0.386, P<0.001). The preoperative value of OC2A (5.6±4.3 degrees) in BI group was smaller than that in the healthy group (P<0.05); however, the preoperative value of POCA (123.0±10.4 degrees) in the BI group was larger than that in the healthy group (P<0.05). There was no significantly different of OC2A and POCA between the healthy group and the AAFD group before the operation (P>0.05). The preoperative value of CSA (25.7±9.5 degrees) in the BI group was larger than that in the AAFD group (16.5±5.1 degrees) (P<0.05). In the BI group, 26 patients had ideal OC2A and POCA (both within 95% confidence interval of the healthy group) postoperatively immediately after surgery and ambulation as a subgroup of the ideal angle group. In the remaining patients with BI (nonideal angle group), VAS, JOA, and NDI at the final follow-up were significantly better than those in the ideal angle group (P<0.05). The ideal angle group showed statistically greater dCSA than the nonideal angle group of the BI group (P<0.05). On the contrary, in the AAFD group, the NDI in the ideal angle group (20 patients) was better than that in the nonideal angle group at the final follow-up, and the ideal angle group had a smaller dCSA compared with the nonideal angle group (P<0.05). The biomechanical balance of occipitocervical region in patients with occipitocervical diseases with different pathogenesis is different. On the basis of the different types of occipitocervical diseases, an appropriate range of OC2A and POCA should be selected by the surgeon during OCF, which can further improve the clinical efficacy and reduce the loss of the lower cervical curvature after surgery.

Importance of the Occipitoaxial Angle and Posterior Occipitocervical Angle in Occipitocervical Fusion.

ObjectiveTo observe the effects of occipitoaxial angle (O‐C2 angle, OC2A) and posterior occipitocervical angle (POCA) selection on postoperative clinical efficacy and lower cervical curvature in patients with acute acquired atlantoaxial dislocation after occipitocervical fusion (OCF).MethodsA total of 150 healthy subjects without cervical disease (healthy group) were randomly selected based on gender and age. Three spine surgeons measured the OC2A and POCA of the healthy group and averaged the values. A total of 30 patients with an average age of 51.0 years (range, 18–70 years; 16 male and 14 female) with trauma or rheumatoid arthritis (disease group) who underwent occipitocervical fusion (OCF) for atlantoaxial dislocation between January 2012 and June 2016 were reviewed. OC2A, POCA, and cervical spinal angle (CSA) were measured postoperative/soon after surgery and ambulation, and at the final follow‐up visit. The preoperative and final follow‐up visual analog scale (VAS), Japanese orthopedics association score (JOA), neck disability index (NDI), and dCSA (change of CSA from postoperative/soon after surgery and ambulation to final follow‐up) were recorded.ResultsThe values of OC2A and POCA in 150 healthy subjects were 14.5° ± 3.7° and 108.2° ± 8.1°, respectively, and the 95% confidence interval (CI) were 7.2°–21.8° and 92.3°–124.0°, respectively. There was a negative correlation between OC2A and POCA (r = −0.386, P < 0.001). There were 18 patients (group one) of ideal OC2A and POCA (both within 95% CI of the healthy group) postoperative/soon after surgery and ambulation with a mean follow‐up time of 26.3 ± 20.9 months in disease group. The remaining patients (group two) with a mean follow‐up time of 31.3 ± 21.3 months. There was no statistically significant difference in the baseline data as well as pre‐operative outcomes, including VAS score, JOA score, and NDI between the two groups. Likewise, the post‐operative outcomes in final follow‐up, including VAS and JOA score, had no distinct difference in the two groups. However, NDI (11.0 ± 2.9) in group two at the final follow‐up was significantly higher than that in group one (7.0 ± 2.3) (P < 0.001). And group two showed statistically greater dCSA (5.9 ± 7.5°) than group one (−2.3° ± 6.2°) (P = 0.003).ConclusionsThe negative correlation between OC2A and POCA plays an important role in maintaining the biodynamic balance of the occipital‐cervical region. OC2A and POCA should be controlled of a normal population in patients with acute acquired atlantoaxial dislocation during OCF, which can further improve the clinical efficacy and prevent loss of lower cervical curvature after surgery.

The association of cervical sagittal alignment with adjacent segment degeneration

PurposeCervical spine surgery may affect sagittal alignment parameters and induce accelerated degeneration of the cervical spine. Cervical sagittal alignment parameters of surgical patients will be correlated with radiological adjacent segment degeneration (ASD) and with clinical outcome parameters.MethodsPatients were analysed from two randomized, double-blinded trials comparing anterior cervical discectomy with arthroplasty (ACDA), with intervertebral cage (ACDF) and without intervertebral cage (ACD). C2–C7 lordosis, T1 slope, C2–C7 sagittal vertical axis (SVA) and the occipito-cervical angle (OCI) were determined as cervical sagittal alignment parameters. Radiological ASD was scored by the combination of decrease in disc height and anterior osteophyte formation. Neck disability index (NDI), SF-36 PCS and MCS were evaluated as clinical outcomes.ResultsThe cervical sagittal alignment parameters were comparable between the three treatment groups, both at baseline and at 2-year follow-up. Irrespective of surgical method, C2–C7 lordosis was found to increase from 11° to 13°, but the other parameters remained stable during follow-up. Only the OCI was demonstrated to be associated with the presence and positive progression of radiological ASD, both at baseline and at 2-year follow-up. NDI, SF-36 PCS and MCS were demonstrated not to be correlated with cervical sagittal alignment. Likewise, a correlation with the value or change of the OCI was absent.ConclusionOCI, an important factor to maintain horizontal gaze, was demonstrated to be associated with radiological ASD, suggesting that the occipito-cervical angle influences accelerated cervical degeneration. Since OCI did not change after surgery, degeneration of the cervical spine may be predicted by the value of OCI.NECK trialDutch Trial Register Number NTR1289.PROCON trialTrial Register Number ISRCTN41681847.Graphic abstractThese slides can be retrieved under Electronic Supplementary Material.

The most appropriate cervical vertebra for the measurement of occipitocervical inclination parameter: a validation study of C3, C4, and C5 levels using multi-positional magnetic resonance imaging.

To evaluate which cervical level is the most appropriate level to measure occipitocervical inclination (OCI). Sixty-two patients with multi-positional MRI: 24 males and 38 females, who had cervical lordosis and had a disk degeneration grade of 3 or less were included. We measured patient's OCI at C3, C4, and C5, occipitocervical angle (OCA), occipitocervical distance (OCD), C2-7 angle, and cervical sagittal vertical axis (cSVA) in neutral, flexion, and extension position. The correlation between OCI and OCA, OCD, C2-7 angle, and cSVA on each cervical level in all three positions was tested using Pearson's correlation coefficient test. The difference between OCIs at each cervical level was tested by Wilcoxon signed-rank test. p value of less than 0.05 was set as a statistically significant level. C5 OCI showed statistically significant correlation with OCA, OCD, C2-7 angle, and cSVA in all three positions (p < 0.05, r = 0.214-0.525). C3 OCI in flexion (p = 0.393, r = 0.081) and C4 OCI in neutral and flexion (neutral p = 0.275, r 0.104; flexion p = 0.987, r = 0.002) did not show significant correlation with C2-7 angle. There was a statistically significant difference between C3, C4, and C5 OCIs in neutral and extension position (p < 0.05). At the same time, OCI showed statistically strong correlation between adjacent cervical levels (p < 0.001, r = 0.627-0.822). C5 cervical level is the most appropriate level for OCI measurement. OCI should be measured at the same cervical level at all time. C4 OCI can reliably substitute C5 OCI in case C5 which is invisible on radiographic image. These slides can be retrieved under Electronic Supplementary Material.

Sagittal alignment correlates with the C1-C2 fixation angle and functional outcome after posterior atlantoaxial fixation for traumatic atlantoaxial instability

The C1-C2 angle has been shown to correlate with subaxial alignment under various conditions. The aim of this study was to evaluate the correlation between the C1-C2 fixation angle and subaxial sagittal alignment as well as the impact of the sagittal vertical axis (SVA) on functional outcomes in traumatic atlantoaxial (A-A) instabilities.The data of 36 patients who underwent posterior C1-C2 fixation for traumatic A-A instability between December 2005 and September 2015 were retrospectively reviewed. Radiographic parameters, including the C1-C2 angle, occipitocervical angle, C2-C7 angle, and C2-C7 SVA, were measured before surgery and at 1-year follow-up. Clinical outcomes were measured using the visual analogue scale (VAS) and Neck Disability Index (NDI). The preoperative and postoperative relationships between parameters were analyzed.In preoperative and postoperative radiographs, the C1-C2 angle correlated with the C2-C7 angle (r = −0.347, p = 0.038, and r = −0.339, p = 0.043, respectively) and the C2-C7 SVA (r = 0.648, p < 0.001, and r = 0.436, p = 0.008, respectively). The postoperative C2-C7 SVA was directly proportional to the preoperative C2-C7 SVA and postoperative C1-C2 angle (postoperative C2-C7 SVA = 0.72 + 0.669 × [preoperative C2-C7 SVA] + 0.555 × [postoperative C1-C2], r2 = 0.677, p < 0.001). The postoperative C2-C7 SVA correlated with postoperative VAS (rs = 0.382, p = 0.021) and NDI (rs = 0.476, p = 0.003).The postoperative C2-C7 SVA was affected by the preoperative C2-C7 SVA and the postoperative C1-C2 angle and showed significant positive correlation with postoperative NDI. The C1-C2 fixation angle and the preoperative C2-C7 SVA should be carefully considered to avoid postoperative sagittal imbalance.

A strategy of combining posterior occipitocervical angle with occipital-C 2 angle for adjustment of occipitocervical fixation angle in posterior instrumented occipitocervical fusion

To assess the application and the effectiveness of a strategy of combining posterior occipitocervical angle (POCA) with occipital-C 2 (O-C 2) angle for adjustment of occipitocervical fixation angle in posterior instrumented occipitocervical fusion. The clinical data of 22 patients undergoing posterior instrumented occipitocervical fusions between March 2013 and January 2016 were retrospectively analysed, and all patients were performed by using a strategy combining with POCA and O-C 2 angle for adjustment of occipitocervical fixation angle. All patients suffered from occipitocervical instability, including 7 males and 15 females with an average age of 44.4 years (range, 20-63 years). The patients were diagnosed as skull base depression with atlantoaxial dislocation in 20 cases and rheumatoid arthritis in 2 cases. The preoperative Japanese Orthopaedic Association (JOA) score was 13.2±2.0, and the visual analogue scale (VAS) score was 6.3±0.9. The POCA was first used to guide the pre-bending of the nail-rod system during the operation, so that POCA of 12 patients with abnormal preoperative POCA could be restored to the normal range; then intraoperative fluoroscopy was used to confirm whether the O-C 2 angle was within the normal range (4 cases were abnormal and 2 cases needed intraoperative adjustment); finally, POCA and O-C 2 angles were within normal range after adjustment. The postoperative complications were recorded, and the JOA and VAS scores were used to evaluate the recovery of spinal nerve function and the degree of pain relief after operation. The radiological data were collected to evaluate the bone graft fusion, the changes of postoperative POCA, O-C 2 angle, and lower cervical curvature (Cobb angle). All 22 patients were followed up 12-48 months, with an average of 24 months. No serious complications and reoperation occurred. At last follow-up, the VAS score and JOA score were 2.9±0.8 and 15.4±0.9 respectively, which were significantly improved when compared with preoperative ones ( t=15.870, P=0.000; t=6.587, P=0.000). Imaging examination showed that 22 patients had occipitocervical osseous fusion, good position of internal fixator without loosening or fracture, and good occipitocervical stability. The POCA and O-C 2 angles were within the normal range at 3 days after operation and at last follow-up, and there were significant differences when compared with preoperative ones ( P<0.05); but no significant difference was found in POCA and O-C 2 angles between at 3 days after operation and at last follow-up ( P>0.05). There was no significant difference in Cobb angle of lower cervical spine between before and after operation ( P>0.05). The strategy of combination POCA and O-C 2 angle for adjustment of occipitocervical fixation angle during operation can ensure a better effectiveness.

Surgical, clinical, and radiological outcomes of occipitocervical fusion using the plate-screw-rod system with allograft in craniocervical instability.

Objective:We evaluated surgical, clinical, and radiological outcomes of posterior occipitocervical fusion (OCF) using plate–rod–screw construct supplemented with allograft in cases of occipitocervical instability.Study Design:This was a retrospective analysis of prospective collected data.Methods:Data of 52 patients who underwent posterior OCF using plate–screw–rod construct supplemented with allograft at a single institute from 2009 to 2014 were analyzed. Demographics, clinical parameters (Visual Analog Score [VAS], ODI, and mJOA score), functional status (McCormick scale), radiological parameters – mean atlantodens interval, posterior occipitocervical angle, occipitocervical 2 angle, and surgical parameters (operative time, blood loss, hospital stay, and fusion) with complications were evaluated.Results:The mean age of the patients was 54.56 ± 16.21 years with male: female was 28:24. The mean operative time was 142.2 min (90–185 min) and mean blood loss was 250.8 ml. The mean duration of hospital stay was 6.7 days and mean follow-up period was 65.17 ± 5.39 months. There was significant improvement in clinical parameters (modified JOA score, VAS, and Oswestry Disability Index values) postoperatively. Forty patients showed recovery in neurological status at least in Grade 1 in McCormick scale with no neurological deterioration in any patient. Furthermore, radiological parameters at cervicomedullary junction got into acceptable range. Implant-related complications noted in 1 patient and 1 patient had vertebral artery injury. We had dural tear in 3 patients and infection in 2 patients. Fusion was achieved in 46 cases with mean time for fusion was 11.039 months.Conclusion:Patients with occipitocervical instability can successfully undergo posterior OCF using plate–screw–rod construct supplemented with allograft with high fusion rate, good clinical and functional outcomes, and low complication rate.

Imaging measurement and clinical significance of occipitocervical angle in healthy people at different ages

To measure imaging data of occipitocervical angle in healthy people at different ages by X-ray. One hundred and fifty asymptomatic volunteers(75 males and 75 females) aged from 20 and 70 years old with an average of(44.83±13.88) years old were divided into 5 groups according to different ages(20 to 29 years old, 30 to 39 years old, 40 to 49 years old, 50 to 59 years old and 60 to 70 years old), and 30 people in each group. All people underwent lateral radiography of neck on neutral position. McGregor line (the lowest connection line between upper margin of hard palate and occipital scales of plating), occipitocervical angle(OCA) formed by edge of C2 vertebral body, takami's occipitocervical angle formed between connection line of posterior marginal of C2 vertebral body and parallel lines of hard palate were collected. The data were performed statistical analysis according to gender and different ages, and analyzed correlation between OCA and TOCA. OCA of 75 males at different ages were (14.71±3.09)° and(14.22±4.27)° in 75 females. TOCA of 75 males at different ages were (90.50±4.63)° and (90.57±6.67) ° in 75 females. There were no statistical difference in OCA and TOCA in people at different ages(P<0.05). There were no significant meaning among 5 groups at different ages in OCA and TOCA(P>0.05). The relation analysis results showed positive correlation between OCA and TOCA(r=0.454, P<0.01). The paper provided normal values for occipitocervical angle in population of southwestern China between 20 and 70 years old, and results may be useful for posterior occipitocervical fixation and fusion.

A New Method of Measuring the Occipitocervical Angle That Could be Applied as an Intraoperative Indicator During Occipitocervical Fusion.

A method for measuring occipitocervical angle. To develop a new method of measurement for assessing the occipitocervical angle using intraoperative fluoroscopic imaging, and to examine its reliability. To avoid postoperative complications following occipitocervical fusion, it is vital to obtain a suitable fusion angle between the occipital bone and the upper cervical spine. The subjects were 30 cases with occipito-atlanto-axial lesions and 30 healthy volunteers. Lateral plain radiographs of the cervical spine in neutral position were used to draw the McGregor line, the line between the external occipital protuberance and the most caudal point on the midline occipital curve (Oc line), the tangential line of the inferior endplate of the C2 vertebra (C2 line), and the posterior longitudinal line of the C2 vertebra (Ax line). The angles formed by these 4 lines and the horizontal line were measured. The O-C2 angle and the Oc-Ax angle, the new indicator, were measured by 3 doctors and reliability was evaluated. In the disease group, mean intraobserver variances of the McGregor, Oc, C2, Ax, O-C2, and Oc-Ax angles were 0.7, 1.3, 1.5, 1.2, 1.6, and 1.9 degrees. Mean intraobserver intraclass correlation coefficients were 0.997, 0.994, 0.994, 0.997, 0.989, and 0.988, showing high intraobserver reliability for all angles. Mean interobserver intraclass correlation coefficients were 0.998, 0.996, 0.994, 0.997, 0.988, and 0.990, showing high interobserver reliability for all angles. The same reliability was obtained in the healthy group. The Oc-Ax angle is as reliable an indicator as the conventional O-C2 angle, and could be used as a new intraoperative indicator for occipitocervical fusion. It may be particularly useful in cases where it is difficult to identify the McGregor line and/or the inferior endplate of the C2 vertebra. Level 3-diagnostic study.

Occipitocervical inclination: new radiographic parameter of neutral occipitocervical position.

To describe occipitocervical inclination (OCI), a new parameter that could compensate for defects in existing radiographic parameters, and to define occipitocervical neutral position. Neutral, flexion, and extension lateral cervical spine radiographs of 200 patients (100 male and 100 female patients) judged to be normal were analyzed. The mean age was 45.19years (range 11-74; 42.84 for male and 47.53 for female patients). For OCI, the angle formed by the line connecting the posterior border of the C4 vertebral body and McGregor's line was measured. Occipitocervical angle (OCA) and occipitocervical distance (OCD) were measured and compared with OCI. OCI on standard, neutral lateral cervical radiographs was 102.51°±8.87°. There was no significant gender difference in neutral OCI 102.81°±7.93° for male and 102.21°±9.74° for female patients (P=0.631). The mean neutral OCA was 38.69°±9.23°, and the mean neutral OCD was 22.98±5.10mm. Pearson's correlation coefficient for the value of the cervical lordosis angle and that of neutral OCI was r=0.274 (P<0.001). Intraclass correlation coefficient values for inter- and intraobserver reliability for OCI were significantly higher than those for OCA (P<0.001) and tended to be higher than those for OCD (P=0.087). OCI is a very useful parameter for the determination of neutral position during occipitocervical fusion for patients with altered C0-C2 anatomy.

Airway adverse events following posterior occipito-cervical spinal fusion

Management of the airway may be challenging in patients undergoing occipito-cervical spine fusions (OCF). Changes in the occipito-cervical angle (dOC2A) of fusion after surgery may result in acute airway obstruction, dyspnea and/or dysphagia. Objectives of the study were to review the airway management of patients during posterior OCF, determine the incidence, nature and risk factors for postoperative airway adverse events (AEs), and to determine the relationship between airway AEs and the change in dOC2A. In this retrospective cohort of 59 patients, following extubation in the operating room (OR), there were no complications in 43 (73%) patients (Group 1). Sixteen (27%) patients (Group 2) had airway complications; 4 requiring reintubation and 12 having delayed extubation. The number of vertebral levels fused (>6), presence of difficult intubation and duration of surgery (>5h) were significantly associated with AEs. There was no significant difference in the dOC2A between the groups (−1.070±5.527 versus −4.375±10.788, p=0.127). Airway management in patients undergoing OCF poses a challenge for the anesthesiology and surgical teams. The incidence of AEs was 27%. The decision to extubate immediately after surgery needs to be individualized. Factors such as difficult intubation, number of vertebral levels fused and duration of surgery have to be considered. A significant correlation between dOC2A and postoperative AEs could not be established. Risk factors for postoperative AEs are multifactorial and prospective evaluation of these factors is indicated.