Number Of Inflows Research Articles

Can the Post-COVID FDI Boost the Indian Economy?

Ever since the liberation of trade policies in India, Foreign Direct Investments (FDI) has been crucial in the growth of the economy, both at the macro as well as sector level. The association between FDI and economic growth is an area of interest globally. The investment decisions are affected by several national and international events that add to the volatility of the number of inflows. COVID-19 pandemic severely impacted the intensity of FDI inflows. But the strong resilience by our government manifested in crucial policy reforms and proactive decision-making minimized the impact. This article examines the potential impact of FDI on crucial macroeconomic variables using the Computable General Equilibrium (CGE) Model. Introducing the policy shock of $90 billion into the model, an increase of 5.68% per annum in GDP is estimated. Findings indicate that the impact of FDI shall be favourable to a large number of sectors mainly metals, construction, motor vehicle, computers, and electronics in terms of increased output, exports, and employment opportunities. The study offers logical implications for the policymakers to continue strengthening their moves to attract FDI.

Dynamic Material Flow Analysis of Perfluorooctane Sulfonate in China: 1985-2019

Perfluorooctane sulfonates (PFOS) are regarded as a category of chemicals with persistence, bioaccumulation, and toxicity. Understanding dynamic flows, stocks, and emissions of PFOS on a macro spatial and temporal scale can help provide a scientific basis for their sound management. In this work, a dynamic material flow analysis (d-MFA) model was built to characterize and analyze the cycles of PFOS in mainland China over the period 1985-2019. Flows, stocks, and environmental emissions were calculated and the sensitivity and uncertainty of the results were then analyzed. Results show that domestic production was the primary source of PFOS in China, most of which was flowed to the domestic market in the form of final products, with the remainder exported to international markets; soil and water were the main sinks of PFOS in China, with emissions from the usage stage contributing the largest portion (103 tons in 2019). The number of inflows and outflows were relatively low before 2000, but gradually increased until 2009 when the relevant convention was issued. Since 2005, in-use stocks and emissions of PFOS have grown yearly. In addition, stocks in landfill have been climbing since 1985. End-of-life management was still dominated by traditional methods, such as landfill and incineration, while there was a trend towards green treatments. This study can provide basic data and theoretical support for the sound management of PFOS in China.

GlmGUI v1.0: an R-based graphical user interface and toolbox for GLM (General Lake Model) simulations

Abstract. Numerical modeling provides an opportunity to quantify the reaction of lakes to alterations in their environment, such as changes in climate or hydrological conditions. The one-dimensional hydrodynamic General Lake Model (GLM) is an open-source software and widely used within the limnological research community. Nevertheless, no interface to process the input data and run the model and no tools for an automatic parameter calibration yet exist. Hence, we developed glmGUI, a graphical user interface (GUI) including a toolbox for an autocalibration, parameter sensitivity analysis, and several plot options. The tool is provided as a package for the freely available scientific code language R. The model parameters can be analyzed and calibrated for the simulation output variables water temperature and lake level. The glmGUI package is tested for two sites (lake Ammersee, Germany, and lake Baratz, Italy), distinguishing size, mixing regime, hydrology of the catchment area (i.e., the number of inflows and their runoff seasonality), and climatic conditions. A robust simulation of water temperature for both lakes (Ammersee: RMSE =1.17 ∘C; Baratz: RMSE =1.30 ∘C) is achieved by a quick automatic calibration. The quality of a water temperature simulation can be assessed immediately by means of a difference plot provided by glmGUI, which displays the distribution of the spatial (vertical) and temporal deviations. The calibration of the lake-level simulations of lake Ammersee for multiple hydrological inputs including also unknown inflows yielded a satisfactory model fit (RMSE =0.20 m). This shows that GLM can also be used to estimate the water balance of lakes correctly. The tools provided by glmGUI enable a less time-consuming and simplified parameter optimization within the calibration process. Due to this, i.e., the free availability and the implementation in a GUI, the presented R package expands the application of GLM to a broader field of lake modeling research and even beyond limnological experts.

Large-Scale Changes of the Forestation in River Channel Below the Dams in Southern African Rivers: Assessment Using the Google Earth Images

According to the results of many studies construction of dams, their decommissioning, and sediment flushing from the reservoir have been associated with vegetation dynamics. However, factors governing the spatial changes of forestation in the floodplain below the dams have not been explored extensively. This study examined the interacting effects of dam, inflow and land-use patterns of catchment areas and other factors on downstream vegetation patterns along the downstream reaches of Southern African Rivers. A total of 105 segments of 15 rivers (16 dams) located in seven Southern African countries were studied. Areas of herbaceous and forest vegetation of river channels below a dam and land-use catchment area patterns were obtained by the Google area calculator and aerial image analysis. Forest development was the highest just below the dams, and the ratio of forest cover decreased with distance from the dam toward the river mouth. Forest coverage ratio was found to decrease with an increase in dyke distance, number as well as of inflows (r = -0.66, P <0.01) and water coverage ratio, and bare land in the river flood plain. However, a principal component analysis (PCA) showed that the proportion of bare land in the catchment area, the dyke distance of the river and the number of inflows or tributaries are the factors most associated with forestation among the studied parameters. Forestation progressively decreased following the entrance of free following tributaries below dams, which appeared to reduce the effects produced by dams on vegetation forestation by causing local deviation. The impact of different land use types, such as agriculture on forestation, was insignificant though in some cases, land use areas cause the forest area reduction.

Factors Affecting the Changes of Downstream Forestation in the South American River Channels

Due to construction of dams on the river channels has caused enormous social and environmental impacts in South American countries which have been associated with vegetation dynamics in many studies. However, factors governing the spatial changes of forestation in the floodplain after dams have not been explored extensively. A total of 72 segments of 9 rivers (12 dams) located in five Southern American countries (Chile, Argentina, Uruguay, Paraguay and Brazil) were studied. This study examined the interacting effects of dam, inflow and land-use patterns of catchment areas and other factors on downstream vegetation patterns along the downstream reaches of some South American rivers. Forest and herbs vegetation coverage areas of river channels after a dam and land-use catchment area patterns were obtained by the Google area calculator and aerial image analysis. Forest coverage was the highest just below the dams, and the ratio of forest cover decreased with distance from the dam toward the river mouth. Forest coverage ratio was found to decrease with an increase in dyke distance, number of inflows (r=?0.814, p<0.01) and water coverage ratio, and bare land in the river flood plain. However, a principal component analysis (PCA) showed that the proportion of bare land in the catchment area, the dyke distance of the river and the number of inflows or tributaries are the factors most associated with forestation among the studied parameters. As a result of local deviation due to the entrance of tributaries after a dam, the effects produced by dams on vegetation as well as forestation are gradually decreased towards the downstream. Though in some cases different land use types such as agriculture areas reduce forest area, their impact on forestation was insignificant.

Trapping efficiency with rainfall and seasonal changes in vegetative filter strips over a course of three years

Abstract Nonpoint source pollution does not have a clear route for elimination, and due to the amounts of these types of pollution, it is not easy to eliminate the polluting substances. In addition, the characteristics of nonpoint source pollution can easily be affected by factors other than the concentration, making it difficult to predict the pollution sources. Therefore, we installed a vegetative filter strip, which is a natural type of nonpoint source, around Kyung-An stream and calculated the trapping efficiency occurring during rainfalls, after which we analyzed these results. Over a period of 3 y, we monitored these strips 17 times, dividing the events by growth periods and non-growth periods to look more carefully into their effectiveness according to the rainfall levels. Owing to the special characteristics of nonpoint source pollution, the range of data was wider, but as we went through the elimination process, the number of outflows appeared to be more stable than the number of inflows. During ...

Occurrence of varved lake sediment sequences in Varmland, west central Sweden: lake characteristics, varve chronology and AMS radiocarbon dating

Varved lake sediments can be used to set multiple environmental proxies within a calendar year time scale. We undertook a systematic survey of lakes in the Province of Värmland, west central Sweden, with the aim of finding continuous varved lake sediment sequences covering the majority of the Holocene. In Fennoscandia, such sediments have previously only been recorded in northern Sweden and in southern and central Finland. By following a selective process and fieldwork we discovered three new varved sites (i.e. Furskogstjärnet, Mötterudstjärnet and Kälksjön). We found that lakes with varved sediments have several common lake morphometry properties and lake catchment characteristics such as maximum water depth, maximum water depth/lake surface area ratio, catchment soil types, altitude and number of inflows. Varve chronologies, supported by AMS‐14C dating and tephrochronology were established for two of the sediment profiles. These varve chronologies are the longest geological records with an annual resolution known to exist in Sweden. In Furskogstjärnet, the AMS‐ 14C dates based on terrestrial plant macrofossils at several levels deviate significantly from the varve based time‐depth curve. In Motterudstjarnet, a fully reasonable time‐depth model based on the 14C dates gives older ages in the lower part of the sequence compared to the varve chronology. These results highlight that seemingly acceptable AMS radiocarbon dates may be erroneous. They also point to the fact that varved lake sediments are reliable geological archives with respect to chronological control and accuracy. Thus, these archives should be of prime interest for studies of climate and environmental change undertaken with the aim of providing sub‐decadal resolution proxy data sets.

Occurrence of varved lake sediment sequences in Värmland, west central Sweden: lake characteristics, varve chronology and AMS radiocarbon dating

Varved lake sediments can be used to set multiple environmental proxies within a calendar year time scale. We undertook a systematic survey of lakes in the Province of Varmland, west central Sweden, with the aim of finding continuous varved lake sediment sequences covering the majority of the Holocene. In Fennoscandia, such sediments have previously only been recorded in northern Sweden and in southern and central Finland. By following a selective process and fieldwork we discovered three new varved sites (i.e. Furskogstjarnet, Motterudstjarnet and Kalksjon). We found that lakes with varved sediments have several common lake morphometry properties and lake catchment characteristics such as maximum water depth, maximum water depth/lake surface area ratio, catchment soil types, altitude and number of inflows. Varve chronologies, supported by AMS- C-14 dating and tephrochronology were established for two of the sediment profiles. These varve chronologies are the longest geological records with an annual resolution known to exist in Sweden. In Furskogstjarnet, the AMS- C-14 dates based on terrestrial plant macrofossils at several levels deviate significantly from the varve based time-depth curve. In Motterudstjarnet, a fully reasonable time-depth model based on the C-14 dates gives older ages in the lower part of the sequence compared to the varve chronology. These results highlight that seemingly acceptable AMS radiocarbon dates may be erroneous. They also point to the fact that varved lake sediments are reliable geological archives with respect to chronological control and accuracy. Thus, these archives should be of prime interest for studies of climate and environmental change undertaken with the aim of providing sub-decadal resolution proxy data sets. (Less)