Nucleation Of Polymers Research Articles

Polymer dynamics of Alp7A reveals how two critical concentrations govern assembly of dynamically unstable actin-like proteins.

Dynamically unstable polymers capture and move cellular cargos in bacteria and eukaryotes, but regulation of their assembly remains poorly understood. Here we describe polymerization of Alp7A, a bacterial actin-like protein (ALP) that distributes copies of plasmid pLS20 among daughter cells in Bacillus subtilis. Purified ATP-Alp7A forms dynamically unstable polymers with a high critical concentration for net assembly (ccN = 10.3 µM), but a much lower critical concentration for filament elongation (ccE = 0.6 µM). Rapid nucleation and stabilization of Alp7A polymers by the accessory factor, Alp7R, decrease ccN into the physiological range. Stable populations of Alp7A filaments appear under two conditions: (i) when Alp7R slows catastrophe rates or (ii) when Alp7A concentrations are high enough to promote filament bundling. These results reveal how dynamic instability maintains high steady-state concentrations of monomeric Alp7A, and how accessory factors regulate Alp7A assembly by modulating ccN independently of ccE.

Silica polymerization and nanocolloid nucleation and growth kinetics in aqueous solutions

Amorphous silica precipitation from aqueous solutions at low temperatures (<100 °C) involves the initial nucleation and growth of silica polymers followed by aggregation, cementation and recrystallization to form opaline silica. In this study, silica polymerization was studied at temperature 23–80 °C, pH 2.48–9.65, and ionic strength 0.01–0.53 mol kg−1. Measured changes in the concentration of monomeric silica (SiO2(mono)) were fit assuming the polymerization reaction is fourth-order with respect to the difference between the concentration of silicic acid (Si(OH)4(aq)) and its concentration at equilibrium (Si(OH)4(aq)eq) with respect to amorphous silica:r=-k4AsmSi(OH)4(aq)-mSi(OH)4(aq)eq4where r is the overall rate of the reaction, As is the specific surface area of the formed polymers, calculated assuming particle-size-dependent solubility and a spherical polymer geometry, and k4 is the rate constant. The rate constant at zero ionic strength is given by:k0=Aexp-Ea/RTaOH-nwhere A is a pre-exponential constant (0.3822 mmol−3 cm−2 s−1), Ea is the activation energy (29.87 kJ mol−1), and n is equal to −0.80. The overall rate constant as a function of ionic strength (I) is given by:k4=k0Imwhere m is equal to 0.65. The rate constant increases by approximately six orders of magnitude from pH of 2 to 10 and one order of magnitude between temperature ∼20 and 80 °C. However, hydrolysis of silicic acid (Si(OH)4(aq)) at pH above ∼8 decreases the relative abundance of Si(OH)4(aq) while increasing the solubility of amorphous silica, thereby decreasing the rate of silica polymerization. The inferred reaction order is consistent with a reaction mechanism rate-limited by the formation of the cyclic tetramer across a wide range of pH. The time-dependence of the specific surface area during polymerization reflects the formation of critical nuclei towards the beginning of the polymerization process and Ostwald ripening of larger polymers towards the end of the polymerization process. The developed rate equation can predict rates of silica polymerization across a wide range of aqueous solution compositions.

Enhanced nucleation of bimodal molecular weight distribution polymers: A molecular dynamics study

We perform coarse-grained molecular dynamics (CGMD) simulations to study the homogeneous nucleation of bimodal and unimodal molecular weight distribution polymers with equivalent average molecular weight. First, a statistical method is proposed to determine the critical nuclei and thus calculate the free energy barrier of nucleation. From the temperature dependence of diffusion coefficient, we also determine the activation energy of diffusion. Then we calculate the nucleation rate and find that it is consistent with the classical nucleation theory for homogeneous nucleation in semi-crystalline polymers. Compared with unimodal system, the bimodal system exhibits lower interfacial free energy and consequently lower free energy barrier for nucleation, while the two systems have similar activation energy for diffusion. This suggests that the promoted nucleation rate of bimodal molecular weight distribution polymer is a result of the reduction of interfacial free energy, which is eventually a consequence of chain-folding nucleation of long chain component.

Real‐Time Probing and Unraveling the Morphology Formation of Blade‐Coated Ternary Nonfullerene Organic Photovoltaics with In Situ X‐Ray Scattering

AbstractCharacterizing the bulk heterojunction (BHJ) morphology of the active layer is essential for optimizing blade‐coated organic solar cells (OSCs). Here, the morphology evolution of a highly efficient ternary polymer:nonfullerene blend PM6:N3:N2200 under different blade coating conditions is probed in real‐time by in situ synchrotron X‐ray scattering and in situ ultraviolet‐visible (UV‐vis) spectroscopy. Besides, the morphology of blade‐coated blend films at different conditions is detailed by ex situ X‐ray scattering and microscopic imaging. The ternary blend film exhibited optimized morphology, such as superior molecular stacking structure and appropriate phase separation structure, and boosted photovoltaic performance of the binary blend, as adding a second polymer component to the host polymer:nonfullerene system can balance nucleation and crystallization of polymers and small molecules, facilitating molecular rearrangement to perfect crystallization. Both binary and ternary blends obtained optimized morphology and photovoltaic properties at medium coating speed, mainly attributed to the movement of the polymer and small molecules at the long crystallization and aggregation stage. These findings help understand morphology formation under film drying and provide guidance for optimizing the morphology in blade‐coated OSCs.

Vitamin K3 inhibits FtsZ assembly, disrupts the Z-ring in Streptococcus pneumoniae and displays anti-pneumococcal activity.

The respiratory pathogen, Streptococcus pneumoniae has acquired multiple-drug resistance over the years. An attractive strategy to combat pneumococcal infection is to target cell division to inhibit the proliferation of S. pneumoniae. This work presents Vitamin K3 as a potential anti-pneumococcal drug that targets FtsZ, the master coordinator of bacterial cell division. Vitamin K3 strongly inhibited S. pneumoniae proliferation with a minimum inhibitory concentration (MIC) and a minimum bactericidal concentration (MBC) of 6 μg/ml. Vitamin K3 disrupted the Z-ring localization in both S. pneumoniae and Bacillus subtilis within 30 min of treatment, while the membrane integrity and nucleoid segregation remain unchanged. Several complementary experiments showed that Vitamin K3 inhibits the assembly of purified S. pneumoniae FtsZ (SpnFtsZ) and induces conformational changes in the protein. Interestingly, Vitamin K3 interfered with GTP binding onto FtsZ and increased the GTPase activity of FtsZ polymers. The intrinsic tryptophan fluorescence of SpnFtsZ revealed that Vitamin K3 delays the nucleation of FtsZ polymers and reduces the rate of polymerization. In the presence of a non-hydrolyzable analog of GTP, Vitamin K3 did not show inhibition of FtsZ polymerization. These results indicated that Vitamin K3 induces conformational changes in FtsZ that increase GTP hydrolysis and thereby, destabilize the FtsZ polymers. Together, our data provide evidence that Vitamin K3 derives its potent anti-pneumococcal activity by inhibiting FtsZ assembly.

Nucleation and crystallization of poly(L-lactide) assisted by terminal hydrogen-bonding segments

The role of hydrogen bonding (H-bonding) in polymer nucleation and crystallization is not yet so clear. To understand this physical issue, a series of poly (L-lactide) (PLLA) with different amount of terminal oxamide segments (OXA, -NHCOCONH-) were tailor-made as model H-bonding polymers (PLLAnOXA, n is the number of –NHCO–), and then the influence of H-bonding on the polymer nucleation and crystallization were investigated by a combination of experiments and molecular dynamics (MD) simulations. Compared with PLLA, much more types of H-bonds are created between the OXA segments and either the PLLA chains or the other OXA segments in the PLLAnOXA systems. A segment can be immobilized in the melt by H-bonding induced topological constraint and/or steric hindrance leading to a certain extent of reduction in entropy. Thus, the pair of H-bonded segments acting as a precursor of the “first stems” is expected to inducing local ordered structures (LOS) at elevated temperatures, which further facilitates the formation of both primary and secondary nuclei. As a consequence, the nOXA segments induced H-bonds not only significantly enhanced the crystallization temperature (Tc, from 100 °C to 112 °C) and the crystallinity (Xc, from 10% to 52%) of PLLA, but also increases the crystal growth rate (G) by nearly 10 times (from 0.25 to 2.66 μm min−1 at 150 °C). Moreover, a HI-MS (H-bond induced multi-stage) nucleation phenomenon in the melt of the PLLAnOXA was revealed by in-situ small-angle X-ray scattering (SAXS) under both non-isothermal (1 °C/min) and isothermal (135 °C) conditions. The HI-MS nucleation mechanism is well correlated to the nOXA induced multi-types of H-bonds which possess different thermodynamical stability at a certain high temperature. Therefore, this work not only provides a new route to make rapid crystallizing PLLA via hybridizing H-bonding segments, but also provides a molecular-level insight in the H-bonding assisted nucleation of semi-crystalline polymers in general.

Retarded Crystallization and Promoted Phase Transition of Freeze-Dried Polybutene-1: Direct Evidence for the Critical Role of Chain Entanglement

Polymorphism and crystal transition are common phenomena of semicrystalline polymers. These two behaviors are known to be controlled by the nucleation and chain mobility of polymers, both of which are constrained by the chain entanglement at the molecular level. However, the role of chain entanglement in polymorphic crystallization and crystal phase transition of polymers has not been well understood. Herein, we use isotactic polybutene-1 (PB-1) as a model polymorphic polymer and present the crucial role of chain entanglement in the polymorphic crystallization kinetics and solid-solid phase transition. A series of less-entangled PB-1 with different entanglement degrees were successfully prepared by freeze-drying the polymer dilute solution. Compared to the bulk sample and re-entangled one, chain disentangling of PB-1 suppressed the crystallization kinetics of form II but significantly increased the phase transition rate and final transition degree from form II to form I. The disentangling-promoted II-I phase transition originated from the reduced nucleation barrier and enhanced chain mobility. This work would advance the in-depth understanding on the formation and transition mechanisms of polymorphic polymer crystals at the molecular level.

To Reveal the Importance of the Crystallization Sequence on Micro-Morphological Structures of All-Crystalline Polymer Blends by In Situ Investigation.

In crystalline/crystalline polymer blend systems, complex competition and coupling of crystallization and morphology usually happen due to the different crystal nucleation and growth processes of polymers, making the morphology and crystallization behavior difficult to control. Herein, we probe the crystallization sequence during the film formation process (crystallize simultaneously, component A crystallizes prior to B or inverse) to illustrate the micro-morphology evolution process in poly(3-hexylthiophene) (P3HT) and poly[[N,N-bis(2-octyldodecyl)-napthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt-5, 5'-(2,2'-bithiophene)] (N2200) blend using in situ UV-vis absorption spectra and in situ two-dimensional grazing incidence X-ray diffraction (2D GIXRD). When P3HT and N2200 crystallize simultaneously, a large-sized morphology structure is formed. When strengthening the solution aggregation of P3HT by increasing the solvent-polymer interaction, P3HT crystallizes prior to N2200. A P3HT-based micro-morphology structure is obtained. As the molecular weight of N2200 increases to a critical value (72.0 kDa), the crystallization of N2200 dominates the film formation process. A N2200-based micro-morphology is formed guided by N2200 domains. The results confirm that the crystallization sequence is one of the most important factors to determine the micro-morphology structure in all-crystalline polymer blends.

Concepts of Nucleation in Polymer Crystallization

Nucleation plays a vital role in polymer crystallization, in which chain connectivity and thus the multiple length and time scales make crystal nucleation of polymer chains an interesting but complex subject. Though the topic has been intensively studied in the past decades, there are still many open questions to answer. The final properties of semicrystalline polymer materials are affected by all of the following: the starting melt, paths of nucleation, organization of lamellar crystals and evolution of the final crystalline structures. In this viewpoint, we attempt to discuss some of the remaining open questions and corresponding concepts: non-equilibrated polymers, self-induced nucleation, microscopic kinetics of different processes, metastability of polymer lamellar crystals, hierarchical order and cooperativity involved in nucleation, etc. Addressing these open questions through a combination of novel concepts, new theories and advanced approaches provides a deeper understanding of the multifaceted process of crystal nucleation of polymers.

Homogeneous nucleation of sheared liquids: advances and insights from simulations and theory.

One of the most ubiquitous and technologically important phenomena in nature is the nucleation of homogeneous flowing systems. The microscopic effects of shear on a nucleating system are still imperfectly understood, although in recent years a consistent picture has emerged. The opposing effects of shear can be split into two major contributions for simple atomic and molecular liquids: increase of the energetic cost of nucleation, and enhancement of the kinetics. In this perspective, we describe the latest computational and theoretical techniques which have been developed over the past two decades. We collate and unify the overarching influences of shear, temperature, and supersaturation on the process of homogeneous nucleation. Experimental techniques and capabilities are discussed, against the backdrop of results from simulations and theory. Although we primarily focus on simple systems, we also touch upon the sheared nucleation of more complex systems, including glasses and polymer melts. We speculate on the promising directions and possible advances that could come to fruition in the future.

Investigating nucleation of phase transitions in rod-coil block copolymers

It is known that the nucleation of liquid crystal polymers with orientation interactions can reduce the energy barrier during the polymer crystallization. In this work, we combine the SCFT and string method to explore the nucleation and liquid crystal behavior of rod-coil block copolymers. By examining nucleation transitions from cylinders with different directions to lamellae, we obtain the information of critical nuclei for the first time, including the volume, shape and energy barrier. We further investigate the impacts of orientation interactions along different transition paths. The results show that if the cylinder and lamellae have inconsistent directions, the nucleation will occur with relatively longer transition path and multiple reorientations, and thus leading to higher energy barrier. Nucleation under different Flory-Huggins interactions and nucleation via precursory metastable structures are investigated, and compared with the classical nucleation theory. This work develops the nucleation studies for complex block copolymers with segment orientations, which is helpful for understanding the nucleation of liquid crystal polymers.

Liquid-liquid Phase Separation: The Promoter of Nucleation and Growth of Supramolecular Polymers

Liquid-liquid Phase Separation: The Promoter of Nucleation and Growth of Supramolecular Polymers

Nucleation and Growth of Amino Acid and Peptide Supramolecular Polymers through Liquid-Liquid Phase Separation.

The transition of peptides and proteins from the solution phase into fibrillar structures is a general phenomenon encountered in functional and aberrant biology and is increasingly exploited in soft materials science. However, the fundamental molecular events underpinning the early stages of their assembly and subsequent growth have remained challenging to elucidate. Here, we show that liquid-liquid phase separation into solute-rich and solute-poor phases is a fundamental step leading to the nucleation of supramolecular nanofibrils from molecular building blocks, including peptides and even amphiphilic amino acids. The solute-rich liquid droplets act as nucleation sites, allowing the formation of thermodynamically favorable nanofibrils following Ostwald's step rule. The transition from solution to liquid droplets is entropy driven while the transition from liquid droplets to nanofibrils is mediated by enthalpic interactions and characterized by structural reorganization. These findings shed light on how the nucleation barrier toward the formation of solid phases can be lowered through a kinetic mechanism which proceeds through a metastable liquid phase.

Nucleation and Growth of Amino Acid and Peptide Supramolecular Polymers through Liquid–Liquid Phase Separation

AbstractThe transition of peptides and proteins from the solution phase into fibrillar structures is a general phenomenon encountered in functional and aberrant biology and is increasingly exploited in soft materials science. However, the fundamental molecular events underpinning the early stages of their assembly and subsequent growth have remained challenging to elucidate. Here, we show that liquid–liquid phase separation into solute‐rich and solute‐poor phases is a fundamental step leading to the nucleation of supramolecular nanofibrils from molecular building blocks, including peptides and even amphiphilic amino acids. The solute‐rich liquid droplets act as nucleation sites, allowing the formation of thermodynamically favorable nanofibrils following Ostwald's step rule. The transition from solution to liquid droplets is entropy driven while the transition from liquid droplets to nanofibrils is mediated by enthalpic interactions and characterized by structural reorganization. These findings shed light on how the nucleation barrier toward the formation of solid phases can be lowered through a kinetic mechanism which proceeds through a metastable liquid phase.

Crystallization Kinetics of Poly(ethylene oxide) under Confinement in Nanoporous Alumina Studied by in Situ X-ray Scattering and Simulation.

While a relatively complete understanding of the nucleation and orientation of polymers under confinement in one-dimensional nanochannels has been achieved, crystallization kinetics investigation of confined polymers is still rare. In this work, we investigated the crystallization kinetics of poly(ethylene oxide) confined in anodic alumina oxide templates with different pore sizes using in situ wide-angle X-ray scattering (WAXS). The crystallization kinetics results were fitted with the Avrami equation. The Avrami index was determined by both "isothermal step crystallization" and in situ WAXS. The crystallization process of polymers under one-dimensional nanopore confinement was simulated by a "one-dimensional lattice model". Based on this model, it is shown that homogeneous nucleation with the simultaneous growth of multiple crystal planes with drastically different growth rates could result in Avrami indexes lower than 1.

Controlled growth of imine-linked two-dimensional covalent organic framework nanoparticles.

Covalent organic frameworks (COFs) consist of monomers arranged in predictable structures with emergent properties. However, improved crystallinity, porosity, and solution processability remain major challenges. To this end, colloidal COF nanoparticles are useful for mechanistic studies of nucleation and growth and enable advanced spectroscopy and solution processing of thin films. Here we present a general approach to synthesize imine-linked 2D COF nanoparticles and control their size by favoring imine polymerization while preventing the nucleation of new particles. The method yields uniform, crystalline, and high-surface-area particles and is applicable to several imine-linked COFs. In situ X-ray scattering experiments reveal the nucleation of amorphous polymers, which crystallize via imine exchange processes during and after particle growth, consistent with previous mechanistic studies of imine-linked COF powders. The separation of particle formation and growth processes offers control of particle size and may enable further improvements in crystallinity in the future.

A few rediscovered and challenging topics in polymer crystals and crystallization

This feature article discusses a few rediscovered and challenging topics in polymer crystals and crystallization. Among many research topics in this field, primary nucleation of polymers, twisted and curved polymer crystals, flow-induced crystallization, and supramolecular crystals are selected and illustrated. This selection includes traditional topics with yet to be solved critical questions, and relatively new topics that still call for more developments. Specific attention is paid to the supramolecular crystallization of a new class of macromolecules termed “giant molecules,” which show unusual self-assembly behaviors toward diverse hierarchical nanostructures. We believe that although being an old topic of long history, study on polymer crystallization will continue to flourish and will contribute to a more comprehensive understanding of self-assembly in polymers.

Supramolecular Electropolymerization

AbstractGaining control over supramolecular polymerization mechanisms is of high fundamental interest to understand self‐assembly and self‐organization processes at the nanoscale. It is also expected to significantly impact the design and improve the efficiency of advanced materials and devices. Up to now, supramolecular polymerization has been shown to take place from unimers in solution, mainly by variations of temperature or of concentration. Reported here is that supramolecular nucleation‐growth of triarylamine monomers can be triggered by electrochemistry in various solvents. The involved mechanism offers new opportunities to precisely address in space and time the nucleation of supramolecular polymers at an electrode. To illustrate the potential of this methodology, supramolecular nanowires are grown an oriented over several tens of micrometers between different types of commercially available electrodes submitted to a single DC electric field, reaching a precision unprecedented in the literature.

Supramolecular Electropolymerization.

Gaining control over supramolecular polymerization mechanisms is of high fundamental interest to understand self-assembly and self-organization processes at the nanoscale. It is also expected to significantly impact the design and improve the efficiency of advanced materials and devices. Up to now, supramolecular polymerization has been shown to take place from unimers in solution, mainly by variations of temperature or of concentration. Reported here is that supramolecular nucleation-growth of triarylamine monomers can be triggered by electrochemistry in various solvents. The involved mechanism offers new opportunities to precisely address in space and time the nucleation of supramolecular polymers at an electrode. To illustrate the potential of this methodology, supramolecular nanowires are grown an oriented over several tens of micrometers between different types of commercially available electrodes submitted to a single DC electric field, reaching a precision unprecedented in the literature.

Structural Unit of Polymer Crystallization in Dilute Solution As Studied by Solid-State NMR and 13C Isotope Labeling

The nucleation and growth mechanisms of semicrystalline polymers during crystallization in dilute solutions have been debated in the past decades. Wang et al. recently reported that 13C CH3 labeled poly(l-lactic acid) (PLLA), with small weight-average molecular weight ⟨Mw⟩ = 46K g/mol (s), adopted three-dimensional nanoclusters via adjacent re-entry folding in the solution-grown crystals, and its mean size was independent of crystallization temperature (Tc) [Macromolecules 2017, 50, 6404–6414]. In this work, 13C CH3 labeled PLLA chains with middle and large ⟨Mw⟩ of 90K g/mol (m) and 326 K g/mol (l), respectively, were synthesized. Both ⟨Mw⟩ and kinetics effects on the chain-folding structures and crystal habits of the 13C CH3 labeled PLLA were systematically investigated by solid-state (ss) NMR and atomic force microscopy (AFM). s-, m-, and l-PLLAs commonly adopted faceted lozenge single crystals in dilute amyl acetate (AA) solution (0.05 wt %) under a very low supercooling, ΔT = 40 °C, but dendrites with multiple layers under a rapidly quenched condition, ΔT = ∼130 °C. By comparison of the experimental and simulated 13C–13C DQ buildup curves, it was indicated that (i) all s-, m-, l-PLLA adopted the same mean structure of the three-dimensional nanoclusters in multiple rows via adjacent re-entry structure in the lozenge shape and dendrite crystals and (ii) the mean size of the nanocluster was smaller than the nanocluster size expected from the smallest ⟨Mw⟩ used in this study. On the basis of the crystal habits as well as dimension and size of the nanoclusters, it was suggested that (i) the PLLA chains with different ⟨Mw⟩s initially adopted the same nanoclusters via folding (stage I) and (ii) the aggregation process of the nanoclusters, which was dominated by kinetics, resultantly led to the different morphological features as a function of ΔT (stage II).