Nucleation Activity Research Articles

Calcium crosslinked macroporous bacterial cellulose scaffolds with enhanced in situ mineralization and osteoinductivity for cranial bone regeneration

The inherent biological inertness and lack of three-dimensional (3D) macroporous structures greatly hinder the use of pristine bacterial cellulose (BC) as a tissue engineering scaffold for bone regeneration. To address this issue, we developed a simple and effective strategy to fabricate a BC-based scaffold with excellent bioactivity and macroporous structure by crosslinking short-cut BC nanofibers using Ca2+. The Ca2+ crosslinked macroporous BC scaffold (MPBC@Ca) presents better structural stability due to the enhanced cellulose hydration. Importantly, the Ca2+ on the surface of BC nanofibers can serve as an active nucleation site to accelerate the deposition of hydroxyapatite (HAp), which is beneficial for the construction of biomimetic bone tissue extracellular matrix (ECM) microenvironment. The HAp-deposited MPBC@Ca scaffolds (HAp-MPBC@Ca) with biomimetic ECM microenvironment have excellent cytocompatibility and enhanced osteogenic differentiation of stem cells in vitro. Furthermore, the results of in vivo tests revealed that the HAp-MPBC@Ca scaffold has favorable osteoinductivity and accelerates cranial bone tissue regeneration. This study proposes a novel strategy to improve the bioactivity of BC and presents the great potential of biomimetic ECM microenvironment BC-based scaffold for repairing large cranial bone defects.

Preparation and mechanical properties of biomimetic mineralization collagen for dopamine-polyacrylamide-induced small intestinal submucosa

Bone-like lamellar hydroxyapatite(HAP) was successfully synthesized by biomimetic mineralization on small intestinal submucosa(SIS) induced by dopamine(DA)-polyacrylamide (PAM).HAP was uniformly grown by the method of “collagen fiber active site-regulated ion nucleation growth” on SIS film by a lab-built ion diffusion experimental system. The hydrophilic angles before and after SIS modification were 85.3 ± 1.3° and 35.7 ± 1.2°, respectively. The morphology of grow HAP crystals was similar to that of nature bone. Then, DA-PAM@SIS/HAP material was prepared to mimic bone components and basic unit microstructure of natural bones. The tensile strength of composites was about 12 MPa, which was 2.4 times higher than that of the unmineralized films. The mineralized film should be expectedto be applied in the field of bone remodeling and bone tissue engineering.

Boosting Ion Diffusion and Charge Transfer by Zincophilic Accordion Arrays to Achieve Ultrafast Aqueous Zinc Metal Batteries

AbstractA key challenge to apply aqueous zinc metal batteries (AZMBs) as next‐generation energy storage device is to improve the rechargeability at high current densities, which is needed to circumvent slowly ion diffusion in anode and sluggish charge transfer of Zn2+. Herein, a zincophilic accordion array derived from MOF is developed as zinc host for simultaneously boosted ion diffusion and charge transfer. The designed host is prepared by etching and disproportionation reactions, the abundant zincophilic Sn sites with nano‐size uniform disperse on accordion arrays nanosheets (Sn‐AA). Then a composite Zn anode (Sn‐AA@Zn) is obtained by compacting Sn‐AA host with zinc power (Zn‐P). The Sn‐AA@Zn anode has an ultra‐low activation energy (37.1 kJ mol−1) and nucleation overpotential (10 mV), achieving fast charge transfer of Zinc deposition. In addition, the cycle life of the symmetric cell with Sn‐AA@Zn anode exceeds 13 000 cycles at 50 mA cm−2, which is 32 times than that of the Zn‐P anode. And the full cell with Sn‐AA@Zn anode and MnO2 cathode maintains a capacity of 122 mAh g−1 after 5000 cycles at 5 Ag−1. Hopefully, the 3D anode based on Sn‐AA@Zn accordion array and Zn‐P has significantly improved the rechargeability of AZMB at high current density.

Ultra-stable dendrite-free Na and Li metal anodes enabled by tin selenide host material

Lithium/sodium metal anodes are considered promising candidates to realize high-energy–density batteries because of their high theoretical specific capacity and low potential. However, their cycling stability are hindered by uncontrolled dendrites growth. Herein, SnSe nanoparticles are tightly anchored on the fiber of carbon cloth (CC) to construct SnSe@CC host material in order to control Li/Na nucleation behavior and restrain dendrites growth. It is demonstrated that the alloying product of Li15Sn4/Na15Sn4 with strong metal affinity can provide abundant active nucleation sites, and three-dimensional structure of CC host can significantly decrease the local electric current, thereby guiding homogeneous metal deposition without Li and Na dendrites. Meanwhile, the conversion product of Li2Se/Na2Se will uniformly cover on the surface of metal to serve as ultra-stable solid state interface film. As a result, high-capacity Li metal anode (20 mAh·cm−2) and Na metal anode (10 mAh·cm−2) can work steadily with ultra-long lifespans over 5000 and 6000 h with low overpotentials of 7 mV and 141 mV, respectively. Moreover, the assembled Li and Na metal full batteries exhibit superior electrochemical performances, confirming the practicability of metal anode confined in composite host. Such a strategy of conversion-alloying-type materials as hosts opens up a new path for dendrite-free metal anode electrode.

Study on the high temperature hydration characteristics of titanium extraction slag cementing fluid

Titanium extraction slag (TES) is the residual tailings of high titanium blast furnace slag after secondary titanium extraction, mainly composed of silicoaluminate glass body and crystal impurities such as FeO and TiC. The special chemical composition makes the activity of TES lower than that of granulated blast furnace slag (GBFS), resulting in a large amount of accumulation and causing serious resource waste and environmental pollution. This article preliminarily explores the feasibility of using TES in oil and gas well cementing engineering with reference to underground temperature curing TES. The optimal compressive strength was obtained at a curing temperature of 70 ℃, with a 3 d strength of 15.78 MPa, which not only meets the requirements of cementing engineering but also exceeds the strength of GBFS under the same conditions. At the same time, based on the composition and structural changes of hydration products cured at 70 ℃ for 3 and 28 d, and analyzes the hydration mechanism of TES at high temperatures. The results showed that under the influence of strong alkali activation and CaCO3 nucleation, TES rapidly hydrated and almost completely hydrated at 3 d. As hydration progresses, C-A-S-H crosslinks with each other and gradually transforms into a more dense and thermally stable crystal form (Foshagite), allowing for continuous improvement in compressive strength within 28 d. In summary, TES has high activity at high temperatures, and the strength of the solidified body meets the requirements of cementing, making it suitable as a cementing material for well cementing.

Anthropogenic Dust as a Significant Source of Ice‐Nucleating Particles in the Urban Environment

AbstractAnthropogenic dust is an important constituent of airborne particles in the urban environment but its ice nucleation activity remains poorly investigated. Here, we studied the sources and ice nucleating properties of size‐resolved particles in the urban atmosphere under mixed‐phase cloud conditions. The heat‐resistant ice nucleating particles (INPs) unexpectedly contributed ∼70% of the supermicron INPs at temperatures below −15°C. A detailed chemical composition analysis of size‐resolved particles revealed that these INPs were associated with anthropogenic dust, such as traffic‐influenced road dust. A parameterization based on supermicron particles was developed to predict the anthropogenic dust INP concentration, given their correlations on concentration and similarity in chemical compositions. Once integrated into global models, this parameterization holds the potential to assess the contribution of anthropogenic dust to INPs on a global scale. Given the considerable presence of anthropogenic dust in the atmosphere and its significant role as INPs, we suggest it may be an important aerosol source influencing cloud microphysics and warrant further investigations.

A mesoscopic numerical method for enhanced pool boiling heat transfer on conical surfaces under action of electric field

The saturated pool boiling heat transfer on a conical structure surface under the action of an electric field is numerically investigated by using the lattice Boltzmann (LB) model coupled with an electric field model. A comparison study of boiling heat transfer phenomenon smooth surface and conical surface without the action of an electric field is first conducted in order to quantitatively analyze the mechanism of the electric field effect on boiling heat transfer on the conical structure surface. It is discovered that the conical structure has more active nucleation sites during the nucleate boiling regime, improving the boiling heat transfer efficiency and enhancing the critical heat flux (CHF). However, in the transition boiling stage and film boiling stage, the conical structure increases the flow resistance of the fluid on the fin surface, hindering heat transfer between the vapor and liquid and producing lower heat transfer performance than smooth surface. Based on the aforementioned findings, the boiling heat transmission on the conical structure surface is enhanced by applying an electric field. Numerical results indicate that the effect of the electric field on the boiling heat transfer performance on the conical structure surface is related to the boiling regime. In the earlier stage of the nucleation boiling regime, when an electric field is present, the onset time of bubble nucleation is slightly delayed, bubble size decreases a little, and boiling is slightly suppressed. However, the combination effect of electric field and conical structure, especially the tip effect, prevents the spread and diffusion of dry areas on the heating surface, thereby enhancing boiling heat transfer in the fully developed nucleate boiling stage. The tip effect grows more evidently in the transition boiling regime and film boiling regime, and increasing electric field intensity causes boiling to continue in the nucleate boiling regime at a higher superheat level. As a result, boiling heat transfer performance is greatly improved, and CHF steadily rises.

MDia formins form hetero-oligomers and cooperatively maintain murine hematopoiesis.

mDia formin proteins regulate the dynamics and organization of the cytoskeleton through their linear actin nucleation and polymerization activities. We previously showed that mDia1 deficiency leads to aberrant innate immune activation and induces myelodysplasia in a mouse model, and mDia2 regulates enucleation and cytokinesis of erythroblasts and the engraftment of hematopoietic stem and progenitor cells (HSPCs). However, whether and how mDia formins interplay and regulate hematopoiesis under physiological and stress conditions remains unknown. Here, we found that both mDia1 and mDia2 are required for HSPC regeneration under stress, such as serial plating, aging, and reconstitution after myeloid ablation. We showed that mDia1 and mDia2 form hetero-oligomers through the interactions between mDia1 GBD-DID and mDia2 DAD domains. Double knockout of mDia1 and mDia2 in hematopoietic cells synergistically impaired the filamentous actin network and serum response factor-involved transcriptional signaling, which led to declined HSPCs, severe anemia, and significant mortality in neonates and newborn mice. Our data demonstrate the potential roles of mDia hetero-oligomerization and their non-rodent functions in the regulation of HSPCs activity and orchestration of hematopoiesis.

Origin of secondary fatty alcohols in atmospheric aerosols in a cool–temperate forest based on their mass size distributions

Abstract. Fatty alcohols (FAs) are major components of surface lipids in plant leaves and serve as surface-active organic aerosols (OAs), which can act as primary biological aerosol particles (PBAPs). To elucidate the origin and formation of secondary fatty alcohols (SFAs) in atmospheric aerosols, their mass size distribution in aerosol samples obtained from a deciduous forest canopy was measured in spring, summer and autumn. The SFAs showed the highest concentration in spring (growing season), with n-nonacosan-10-ol being the most abundant. In spring and summer, the size peak of n-nonacosan-10-ol was in the particle size range >10.0 µm, whereas it was in the 1.9–3.0 µm range in autumn. The size distribution of n-nonacosan-10-ol did not show any significant correlation with that of the known biogenic tracers of pollen, soil and fungal spores in spring and summer. The overall results, together with SFAs measured in plant leaves, as well as the literature, suggest that SFAs originate mostly from plant waxes and that leaf senescence status is likely an important factor controlling the size distribution of SFAs. This study provides new insights into the possible sources of PBAPs and their effects on the ice nucleation activity of aerosols based on seasonal changes in particle size.

The Effects of Aminium and Ammonium Cations on the Ice Nucleation Activity of K‐Feldspar

AbstractMineral dust is one of the most abundant types of ice nucleating particles in the atmosphere. During atmospheric transport, mineral dust particles can become coated with inorganic and organic solutes, which can impact their ice nucleation activity. Aminium cations formed from amines are one type of organic solute that can coat mineral dust particles in the atmosphere, but their effects on the ice nucleation activity of mineral dust have not been studied. We investigated the effects of primary, secondary, and tertiary aminium cations with methyl and ethyl groups, as well as ammonium cations, on the ice nucleation activity of K‐feldspar, an important type of mineral dust, in the immersion freezing mode at low cation concentrations (0.2–20 mM) using a droplet‐freezing apparatus. Ammonium cations substantially increased the ice nucleation activity of K‐feldspar, consistent with previous studies. In contrast, primary aminium cations significantly reduced K‐feldspar ice nucleation activity, and secondary and tertiary aminium cations had no significant effect (the effect was less than the uncertainty of our measurements). Our combined results are consistent with the following mechanisms: ammonium cations undergo ion exchange with K‐feldspar, providing exposed N–H groups for hydrogen bonding with ice; primary aminium cations undergo ion exchange with K‐feldspar, exposing a hydrophobic tail that is not effective at nucleating ice; secondary and tertiary aminium cations do not undergo ion exchange with K‐feldspar due to steric effects caused by the multiple hydrophobic groups on the cation.

Cooperative actin filament nucleation by the Arp2/3 complex and formins maintains the homeostatic cortical array in Arabidopsis epidermal cells.

Precise control over how and where actin filaments are created leads to the construction of unique cytoskeletal arrays within a common cytoplasm. Actin filament nucleators are key players in this activity and include the conserved actin-related protein 2/3 (Arp2/3) complex as well as a large family of formins. In some eukaryotic cells, these nucleators compete for a common pool of actin monomers and loss of one favors the activity of the other. To test whether this mechanism is conserved, we combined the ability to image single filament dynamics in the homeostatic cortical actin array of living Arabidopsis (Arabidopsis thaliana) epidermal cells with genetic and/or small molecule inhibitor approaches to stably or acutely disrupt nucleator activity. We found that Arp2/3 mutants or acute CK-666 treatment markedly reduced the frequency of side-branched nucleation events as well as overall actin filament abundance. We also confirmed that plant formins contribute to side-branched filament nucleation in vivo. Surprisingly, simultaneous inhibition of both classes of nucleator increased overall actin filament abundance and enhanced the frequency of de novo nucleation events by an unknown mechanism. Collectively, our findings suggest that multiple actin nucleation mechanisms cooperate to generate and maintain the homeostatic cortical array of plant epidermal cells.

Enhanced nucleate pool boiling heat transfer on CNTs-Cu nanoparticles-coated surfaces: Effects of sintering temperature and CNTs composition on pool boiling behavior

The present study involves the experimental investigation of pool boiling heat transfer characteristics on CNTs-Cu nanoparticles-coated heating surfaces. The advantages of coating the mixture of infinitesimal CNTs with Cu particles on the copper surface are to generate the active nucleation site density by porous structures and enhance the thermal conductivity of the heating surfaces. To explore the effects of sintering temperatures and CNTs composition on pool boiling behavior, we fabricated the boiling test sections under the sintering temperatures of 700, 750, and 800 °C for four different CNTs compositions of 0.0CNTs-100Cu, 0.2CNTs-99.8Cu, 0.3CNTs-99.7Cu, and 0.5CNTs-99.5Cu in wt.%. We first analyzed the surface morphologies, that is, the average pore size, porosity, and pore density, to characterize each tested sample. Pool boiling experiments were later conducted under atmospheric pressure using water to obtain the pool boiling curves and bubble dynamics for different sintering temperatures and CNTs composition. Based on the experimental analysis, nucleate boiling heat transfer enhancement was interpreted in relation to the sintering temperature with surface morphologies and CNTs composition in relation to improved pore density. Compared to the bare copper surface, the achieved maximum enhancement for boiling heat transfer coefficient and critical heat flux were 3.86 and 1.49, respectively, when a 0.5CNTs-Cu-coated surface sintered at 800 °C was applied.

Diversity and ice nucleation activity of Pseudomonas syringae in drone-based water samples from eight lakes in Austria.

Bacteria from the Pseudomonas syringae complex (comprised of at least 15 recognized species and more than 60 different pathovars of P. syringae sensu stricto) have been cultured from clouds, rain, snow, streams, rivers, and lakes. Some strains of P. syringae express an ice nucleation protein (hereafter referred to as ice+) that catalyzes the heterogeneous freezing of water. Though P. syringae has been sampled intensively from freshwater sources in the U.S. and France, little is known about the genetic diversity and ice nucleation activity of P. syringae in other parts of the world. We investigated the haplotype diversity and ice nucleation activity at -8 °C (ice+) of strains of P. syringae from water samples collected with drones in eight freshwater lakes in Austria. A phylogenetic analysis of citrate synthase (cts) sequences from 271 strains of bacteria isolated from a semi-selective medium for Pseudomonas revealed that 69% (188/271) belonged to the P. syringae complex and represented 32 haplotypes in phylogroups 1, 2, 7, 9, 10, 13, 14 and 15. Strains within the P. syringae complex were identified in all eight lakes, and seven lakes contained ice+ strains. Partial 16S rDNA sequences were analyzed from a total of 492 pure cultures of bacteria isolated from non-selective medium. Nearly half (43.5%; 214/492) were associated with the genus Pseudomonas. Five of the lakes (ALT, GRU, GOS, GOL, and WOR) were all distinguished by high levels of Pseudomanas (p ≤ 0.001). HIN, the highest elevation lake, had the highest percentage of ice+ strains. Our work highlights the potential for uncovering new haplotypes of P. syringae in aquatic habitats, and the use of robotic technologies to sample and characterize microbial life in remote settings.

Branched microtubule nucleation and dynein transport organize RanGTP asters in Xenopus laevis egg extract.

Chromosome segregation relies on the correct assembly of a bipolar spindle. Spindle pole self-organization requires dynein-dependent microtubule (MT) transport along other MTs. However, during M-phase RanGTP triggers MT nucleation and branching generating polarized arrays with nonastral organization in which MT minus ends are linked to the sides of other MTs. This raises the question of how branched-MT nucleation and dynein-mediated transport cooperate to organize the spindle poles. Here, we used RanGTP-dependent MT aster formation in Xenopus laevis (X. laevis) egg extract to study the interplay between these two seemingly conflicting organizing principles. Using temporally controlled perturbations of MT nucleation and dynein activity, we found that branched MTs are not static but instead dynamically redistribute over time as poles self-organize. Our experimental data together with computer simulations suggest a model where dynein together with dynactin and NuMA directly pulls and move branched MT minus ends toward other MT minus ends.

An eco-friendly method for the scale-up synthesis of ZSM-5 Zeolite

Scaling-up is the key step of the commercialisation of ZSM-5 zeolite, and the cost-effectiveness and greenness of the synthesis strategy is a decisive factor that cannot be ignored in the scale-up process. Herein, we present a template-free and solid-state-like crystallisation method for the synthesis of ZSM-5 zeolite by mechanical mixing of starting material components, which can be used for the scale-up production of ZSM-5 zeolite. The crystallisation range of ZSM-5 zeolite was obtained by this mechanical mixing of anhydrous starting materials. We have analyzed the kinetics study of three different Na2O/Al2O3/SiO2 systems in the range, and obtained the trends of nucleation and growth activation energy. The results show that mechanical mixing can effectively achieve a high degree of homogenous dispersion of the starting material, which is conducive to obtaining ZSM-5 with high crystallinity and size uniformity. We have synthesised monolithic ZSM-5 with high crystallinity and uniform grain size of about 2 g, 30 g and 120 g in different sizes (2.5 ml/50 ml/200 ml) of Teflon lined high pressure reactors in a single synthesis method. This study affirms the possibility of achieving the scale-up of ZSM-5 zeolite synthesis through the synthetic pathway proposed, presenting a cost-effective, eco-friendly strategy for the industrial preparation of ZSM-5 zeolite.

Effect of temperature, pressure, crystal defect types, and densities on the mechanical behavior of tungsten under tensile deformation: A molecular dynamics simulation study

The mechanical behavior of tungsten under tensile deformation was investigated using molecular dynamics simulations, with a focus on the effects of temperature, pressure, crystal defect types, and densities. Single vacancies, spherical voids, and self-interstitials were studied at concentrations ranging from 0.1% to 2%. The Common neighbor analysis reveals that the crystal structure underwent a phase transition from the body-centered cubic to the face-centered cubic structure at increasing levels of applied strain, followed by the formation of a disordered phase. Increasing temperature reduced the mechanical properties of tungsten, including yield strength, yield strain, modulus of elasticity, and ultimate tensile stress, possibly due to the activation of dislocation nucleation and propagation, resulting in the formation of dislocation loops. Increasing pressure enhanced the mechanical properties of tungsten, with the formation of dislocation loops occurring at much lower strains at higher pressures. All mechanical parameters decreased with increasing defect density, with self-interstitial defects having a more severe effect than single vacancies and spherical voids. The number and length of dislocation loops also increased with increasing defect density. Temperature and pressure had varying effects on the stress–strain curve of tungsten with different defect types and densities, with increasing pressure generally enhancing its mechanical behavior and increasing temperature decreasing it. These findings provide valuable insights into the design and development of tungsten-based materials with enhanced mechanical properties.

Universality of Hair as a Nucleant: Exploring the Effects of Surface Chemistry and Topography.

The ability to control crystal nucleation through the simple addition of a nucleating agent (nucleant) is desirable for a huge range of applications. However, effective nucleating agents are known for only a small number of systems, and many questions remain about the mechanisms by which they operate. Here, we explore the features that make an effective nucleant and demonstrate that the biological material hair-which naturally possesses a chemically and topographically complex surface structure-has excellent potential as an effective nucleating agent. Crystallization of poorly soluble compounds in the presence of hairs from a range of mammals shows that nucleation preferentially occurs at the cuticle step edges, while a novel microdroplet-based methodology was used to quantify the nucleating activities of different hairs. This showed that the activities of the hairs can be tuned over a wide range using chemical treatments. Analysis of the hair structure and composition using atomic force microscopy, scanning ion conductance microscopy, and X-ray photoelectron spectroscopy demonstrates that surface chemistry, surface topography, and surface charge all act in combination to create effective nucleation sites. This work therefore contributes to our understanding of heterogeneous nucleating agents and shows that surface topography as well as surface chemistry can be used in the design or selection of universal nucleating agents.

Investigation of nucleate boiling and bubble dynamics at multiple nucleation sites in subcooled boiling flow

Accurate prediction of nucleate boiling heat transfer and phase change is crucial for subcooled boiling flow modeling. Among the nucleate boiling parameters, departure diameter, departure frequency, and active nucleation site density are considered the most important. To fulfill the modeling requirements, the present study established a comprehensive experimental database with simultaneous measurement of departure diameter, departure frequency, and active nucleation site density at multiple nucleation sites. The experimental data were collected in a vertical annular test section using a microscopic high-speed imaging system. Twenty-two experiments were performed at a system pressure of 150 kPa, liquid flow rate of 0.5 m/s, local subcooling ranging from 10 to 30 °C, and heat flux varying from 250 to 700 kW/m2. Stochastic characteristics of departure diameter and departure frequency at single and multiple nucleation sites were investigated. A correction approach was developed to minimize the impact of upstream bubbles on departure frequency measurement. The sample size of single-site measurement was determined based on the analysis of data dispersions. Large variations between nucleation sites were observed, indicating that single-site measurement is insufficient to characterize all nucleation bubbles. A parametric analysis of nucleate boiling parameters over operating conditions was performed based on the multi-site data. The experimental database generated in this study will be utilized for model evaluation and development in future research.

Graphitization modified three-dimensional fully interconnected high porous TiO2 ceramics: A promising carrier material for thermal storage and thermal conductivity enhancement

In this work, porous TiO2 ceramics (PTC) and the graphitization modification of PTC (GPTC) with three-dimensional fully interconnected and uniform pore structure as a carrier for PCM was prepared by the Pickering emulsion method. Compared with PTC, the thermal conductivity and porosity of GPTCs were further improved and the specific surface area of GPTCs was increased by 5.7 times. The results of DSC curves showed that the melting and solidification enthalpy of PEG-GPTC20 were 143.8 J/g and 139.0 J/g, respectively, which only decrease by 0.68 % and 0.35 % after 100 phase change cycles. The experimental thermal conductivity of PEG-GPTC20 composites improved by 3.2 times. The results of non-isothermal crystallization kinetics revealed that the nucleation activation energy: PEG>PEG-PTC > PEG-GPTC, which indicated that GPTCs porous carrier encapsulation was beneficial to the nucleation process of PEG. The PEG-GPTCs composite phase change material designed in this paper has significant advantages in maintaining high thermal conductivity and heat storage performance at the same time while comparing other composites. Therefore, GPTCs are a promising carrier material for thermal storage and thermal conductivity enhancement.

Self-Assembled Nanostructures of Homo-Oligopeptide as a Potent Ice Growth Inhibitor.

This study reports the formation of self-assembled nanostructures with homo-oligopeptides consisting of amino acids (i.e., alanine, threonine, valine, and tyrosine), the resulting morphologies (i.e., spherical shape, layered structure, and wire structure) in aqueous solution, and their potential as ice growth inhibitors. Among the homo-oligopeptides investigated, an alanine homo-oligopeptide (n = 5) with a spherical nanostructure showed the highest ice recrystallization inhibition (IRI) activity without showing a burst ice growth property and with low ice nucleation activity. The presence of nanoscale self-assembled structures in the solution showed superior IRI activity compared to an amino acid monomer because of the higher binding affinity of structures on the growing ice crystal plane. Simulation results revealed that the presence of nanostructures induced a significant inhibition of ice growth and increased lifetime of hydrogen bonding compared with unassembled homo-oligopeptide. These results envision extraordinary performance for self-assembled nanostructures as a desirable and potent ice growth inhibitor.