Nuclear Magnetic Resonance Spectrometer Research Articles

Temperature-Sensitive Magnetic Resonance Probes: Leveraging Hyperpolarized Pyridine-2-Carbaldehyde and SABRE for Real-Time Temperature Sensing.

In this study, we developed a novel approach for real-time, temperature-sensitive nuclear magnetic resonance (NMR) measurements using signal amplification by reversible exchange (SABRE). We discovered that pyridine-2-carbaldehyde (A) exhibits different behavior depending on temperature, showing high hyperpolarization efficiency. In contrast, its reversible reaction product, the hemiacetal form (A'), is not affected by temperature. Exploiting this difference, we achieved a reliable polarization enhancement ratio without internal standard materials, even at low concentrations. Our method overcomes challenges associated with SABRE for 2-functionalized pyridines, enabling direct temperature monitoring in real-time NMR studies. We successfully applied it to monitor temperatures in solutions containing SABRE-inactive compounds like caffeine. Furthermore, we demonstrated its efficacy using a 60 MHz benchtop NMR spectrometer, validating its potential in challenging environments where conventional techniques may be limited. This technique shows promise for influencing the magnetic resonance field, potentially facilitating more accurate real-time analyses of molecular reactions and structures. Future research will focus on adapting this method for biological settings, aiming to stimulate advancements in NMR and magnetic resonance imaging (MRI) applications.

Nuclear Magnetic Resonance (NMR) and Density Functional Theory (DFT) Study of Water Clusters of Hydrogen-Rich Water (HRW)

The present study investigated the 1H Nuclear Magnetic Resonance (NMR) spectra of hydrogen-rich water (HRW) produced using the EVObooster device. The analyzed HRW has pH = 7.1 ± 0.11, oxidation–reduction potential (ORP) of (−450 ± 11) mV, and a dissolved hydrogen concentration of 1.2 ppm. The control sample was tap water filtered by patented technology. A 600 NMR spectrometer was used to measure NMR spectra. Isotropic 1H nuclear magnetic shielding constants of the most stable clusters (H2O)n with n from 3 to 28 have been calculated by employing the gauge-including-atomic-orbital (GIAO) method at the MPW1PW91/6-311+G(2d,p) density function level of theory (DFT). The HRW chemical shift is downfield (higher chemical shifts) due to increased hydrogen bonding. More extensive formations were formed in HRW than in control filtered tap water. The exchange of protons between water molecules is rapid in HRW, and the 1H NMR spectra are in fast exchange mode. Therefore, we averaged the calculated chemical shifts of the investigated water clusters. As the size of the clusters increases, the number of hydrogen bonds increases, which leads to an increase in the chemical shift. The dependence is an exponential saturation that occurs at about N = 10. The modeled clusters in HRW are structurally stabilized, suggesting well-ordered hydrogen bonds. In the article, different processes are described for the transport of water molecules and clusters. These processes are with aquaporins, fusion pores, gap-junction channels, and WAT FOUR model. The exponential trend of saturation shows the dynamics of water molecules in clusters. In our research, the chemical shift of 4.257 ppm indicates stable water clusters of 4–5 water molecules. The pentagonal rings in dodecahedron cage H3O+(H2O)20 allow for an optimal arrangement of hydrogen bonds that minimizes the potential energy.

HRMAS NMR for Studying Solvent-Induced Mobility of Polymer Chains and Metallocene Migration Into Low-Density Polyethylene (LDPE).

HRMAS (high-resolution magic angle spinning) nuclear magnetic resonance (NMR) spectroscopy of low-density polyethylene (LDPE) affords 1H and 13C NMR spectra with superior resolution. For acquiring HRMAS NMR spectra, the polymer is first swollen with representative organic solvents. Then, the samples are measured with a conventional solid-state NMR spectrometer in the wideline mode or at the low spinning speed of 2 kHz. Anisotropic interactions like CSA (chemical shift anisotropy) and dipolar interactions are reduced due to the additional mobility of the polymer chains in the presence of the solvent within the polymer network. The combined effect of this mobility and MAS leads to signals with substantially reduced halfwidths as compared to classic MAS of the dry polymer. With HRMAS, all signals of the polymer become visible, and the spectra can be used for a quick and easy assessment of the polymer swelling behavior in diverse solvents. Being able to characterize polymers on the molecular level, and identifying the solvents that penetrate the polymer network best, enables the study of post-synthesis modifications of the polymers. It is demonstrated by paramagnetic HRMAS that the metallocene nickelocene (Cp2Ni) penetrates the LDPE network along with the solvent and is homogeneously dispersed in the polymer. SEM images prove that the structure of the polymer is not altered by the presence of a solvent and Cp2Ni. The impact of the paramagnetic Cp2Ni on the 1H signal halfwidth and T1 time of LDPE is studied. HRMAS allows a quick assessment of metal complexes regarding their ability to penetrate the LDPE network and therefore supports future studies of catalytic polymer degradation.

Autonomous mobile robots for exploratory synthetic chemistry.

Autonomous laboratories can accelerate discoveries in chemical synthesis, but this requires automated measurements coupled with reliable decision-making1,2. Most autonomous laboratories involve bespoke automated equipment3-6, and reaction outcomes are often assessed using a single, hard-wired characterization technique7. Any decision-making algorithms8 must then operate using this narrow range of characterization data9,10. By contrast, manual experiments tend to draw on a wider range of instruments to characterize reaction products, and decisions are rarely taken based on one measurement alone. Here we show that a synthesis laboratory can be integrated into an autonomous laboratory by using mobile robots11-13 that operate equipment and make decisions in a human-like way. Our modular workflow combines mobile robots, an automated synthesis platform, a liquid chromatography-mass spectrometer and a benchtop nuclear magnetic resonance spectrometer. This allows robots to share existing laboratory equipment with human researchers without monopolizing it or requiring extensive redesign. A heuristic decision-maker processes the orthogonal measurement data, selecting successful reactions to take forward and automatically checking the reproducibility of any screening hits. We exemplify this approach in the three areas of structural diversification chemistry, supramolecular host-guest chemistry and photochemical synthesis. This strategy is particularly suited to exploratory chemistry that can yield multiple potential products, as for supramolecular assemblies, where we also extend the method to an autonomous function assay by evaluating host-guest binding properties.

Associations of omega-3 fatty acid subclasses with cardiovascular diseases in 500,000 individuals

Abstract Increased blood levels of omega-3 fatty acids have consistently been shown to be associated with reduced risk of cardiovascular diseases (CVD). However, large scale placebo-controlled trials of omega-3 supplementation have had discordant results: in 2018 REDUCE-IT reported a 25% risk reduction, whereas in 2020 STRENGTH reported no risk reduction. The two trials had both different placebos (mineral vs corn oil) and omega-3 formulations (EPA vs DHA+EPA). There is not yet a consensus on what explains these results. Here we describe the profiling of omega-3 fatty acid subclasses, eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA) with nuclear magnetic resonance (NMR), and test their associations with incident CVD in 500,000 individuals from UK Biobank. We utilized 500 MHz NMR spectrometers to analyze total omega-3 and its subclasses in EDTA plasma samples and employed biomarker-specific quantification algorithms to measure their absolute concentrations. In this study, we developed a novel algorithm to quantify EPA, complementing previously described algorithms for omega-3 and DHA. Correlation (r^2) of this novel NMR-based quantification and gas chromatography-based measurements was 0.77 for EPA. On average, DHA comprised 44.5% of the total omega-3 concentration, EPA accounted for 22.2%, and other subclasses constituted 34.3% in the cohort. We computed age and sex adjusted associations of omega-3, DHA, and EPA with 10-year risk of CVD among individuals who were not taking cholesterol lowering medication. We discovered protective associations: for DHA a hazard ratio of 0.85 (0.86-0.89, 95% confidence interval) per standard deviation versus 0.96 (0.95-0.98) for EPA, and 0.95 (0.93-0.97) for total omega-3 (Figure). Since DHA (used in the STRENGTH trial with a null result) has a significantly stronger epidemiological association than EPA, these results from a large-scale observational study do not support the hypothesis that the differential use of DHA and EPA in the REDUCE-IT and STRENGTH trials explains their divergent results.Figure

Strategic approaches to observing 39K NMR signals from potassium–graphite intercalation compounds

Abstract Solid-state nuclear magnetic resonance (NMR) is an invaluable tool for potassium–graphite intercalation compounds (K-GICs), promising anode materials of K-ion batteries, but it has not yet been applied because of several issues. We attempted 39K NMR measurements of K-GICs sealed in glass using an 18.8 T NMR spectrometer with an NMR probe adjusted to the samples. The first observed 39K NMR signal of K-GICs showed the possibility of evaluating intralayer density, which cannot be ascertained from Raman measurements.

How Two‐Dimensional Heterocovariance Spectroscopy and Data Fusion Level out the Inadequacies of Compact Spectrometers

ABSTRACTOver the past decade, sensors and compact spectrometers have emerged as a powerful means for real‐time monitoring of chemical and biochemical processes in the field of process analytical technologies (PATs). This is largely attributed to cost‐efficiency and their robustness in near‐line applications. In comparison to more sophisticated laboratory instruments, these devices exhibit limited sensitivity and resolution. In this study, a combination of near‐infrared, low‐field 1H nuclear magnetic resonance and compact Raman spectrometers were employed for the process monitoring of the acid‐catalyzed esterification of isoamyl alcohol and acetic acid to isoamyl acetate. The resulting real‐time data were transformed and visualized for interpretation using two‐dimensional heterocovariance spectroscopy. The data were also subjected to pretreatment, concatenation, and multivariate analysis in accordance with low‐ and mid‐level data fusion. The spectral interpretation derived from heterocovariance spectroscopy provided support for the data pretreatment during data fusion. By applying these computational techniques, the inherent limitations of sensitivity and resolution associated with compact spectroscopic instruments could be overcome, thereby facilitating the interpretation of data and yielding further insights into the process under study. A comparison of the process parameters resulting from the applied methods indicated that consistent data could be obtained. This study demonstrates that heterocovariance spectroscopy and data fusion allow to enhance compact, less expensive analytical instruments for process monitoring and to acquire process knowledge. This, in turn, enables material, financial, and energy resources to be conserved.

Steady-State Free Precession (SSFP) NMR Spectroscopy for Sensitivity Enhancement in Complex Environmental and Biological Samples Using Both High-Field and Low-Field NMR.

Nuclear magnetic resonance (NMR) spectroscopy is a valuable and complementary tool in environmental research, but it is underutilized due to the cost, size, and maintenance requirements of standard "high-field" NMR spectrometers. "Low-field" NMR spectrometers are a financially and physically accessible alternative, but their lower sensitivity and increased spectral overlap limit the analysis of heterogeneous environmental/biological media, especially with fast-relaxing samples that produce broad, low-intensity spectra. This study therefore investigates the potential of the steady-state free precession (SSFP) experiment to enhance signal-to-noise ratios (SNRs) of fast-relaxing, complex samples at both high- and low-field. SSFP works by obtaining steady-state transverse signal using a train of equally spaced radiofrequency pulses with the same flip angle and a time between pulses less than the transverse relaxation time, allowing for thousands of scans to be summed in a short time period. Here, 13C-SSFP is applied to samples of varying complexity (egg white, dissolved organic matter, and crude oil) at low-field and at high-field for testing and comparison. The potential of in vivo SSFP NMR is additionally investigated by applying 31P-SSFP to live Eisenia fetida at high-field. In some samples, SSFP increased 13C SNR by over 2000% at both high-field and low-field compared to standard 13C NMR and enabled detection of peaks that were not observable by standard 13C NMR. Ultimately, SSFP holds great potential for improving analysis of fast-relaxing, complex samples, which could in turn make low-field NMR spectroscopy a more effective tool not only in environmental/biological research but also in numerous other disciplines.

Enhancing Sensitivity in the Hyphenation of High-Performance Liquid Chromatography to Benchtop Nuclear Magnetic Resonance Spectroscopy at Isocratic and Onflow Conditions.

The onflow hyphenation of high-performance liquid chromatography (HPLC) in adsorption mode with a benchtop 1H nuclear magnetic resonance (NMR) spectrometer is described for the first time. Protonated solvents and isocratic conditions are used. The sensitivity was increased by choosing suitable NMR acquisition parameter as well as optimizing injection parameters and postacquisition data processing methods. With optimized conditions, the limit of detection (LOD) and the limit of quantification (LOQ) were LOD = 0.010 g L-1 and LOQ = 0.031 g L-1 for the methoxy 1H of methyl paraben at 4.07 ppm, LOD = 0.038 g L-1 and LOQ = 0.134 g L-1 for the aromatic 1H of pentyl paraben between 7.00 and 8.50 ppm. These are expressed in injection concentration and are comparable to existing HPLC hyphenation with high-field NMR spectrometers. The analysis of a 2 g L-1 paraben mixture, far below the legal limits for usage in cosmetics, illustrates the applicability of the method. Taking advantage of the spectral resolution, chromatographically overlapping peaks are resolved using analyte-specific NMR elution traces. A methodology is detailed to facilitate the transfer of the optimized method to other (analyte) systems.

Anti-arthritic potential and antioxidant properties of infusion, fractions and flavonoid glycosides from Dipteryx alata (baru) leaves

Dipteryx alata Vogel., popularly known as "baru", is a native species of Brazilian cerrado used by "Ribeirinhos" in the North Araguaia microregion. In the traditional medicine, maceration of barks or leaves infusion are used to treat back and muscle pain, osteoporosis and rheumatism. However, few studies have demonstrated the pharmacological effects of this species. The goal of this study was to perform phytochemicals studies of lyophilized infusion of D. alata leaves (LI-DA), as well as obtaining ethyl acetate fraction (EAF-DA) and hydromethanolic fraction (HMF-DA), and isolated flavonoids. The antioxidant of LI-DA, EAF-DA and HMF-DA, anti-inflammatory effects of LI-DA and quercetin-3-O-β-glucoside-7-O-α-rhamnoside (DA-1) and quercetin-7-O-α-rhamnoside (DA-2) were performed while in silico tests were used for absorption, distribution, metabolism, excretion and toxicity predictions of DA-1 and DA-2. LI-DA, EAF-DA and HMF-DA were evaluated in antioxidant assays (2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid - ABTS; 2,2-diphenyl-1-picrylhydrazyl - DPPH; hydrogen peroxide - H2O2; reducing power and oxidation of β-carotene). The DA-1 and DA-2 were isolated from EAF-DA using chromatographic methods and characterized by Nuclear Magnetic Resonance (NMR) spectrometer. The Programs ProTox 3.0 and ADMETlab 2.0 were used for the prediction studies of DA-1 and DA-2. Mice received a single dose of LI-DA (3, 30, and 100 mg/kg), DA-1 (3 mg/kg) and DA-2 (3 mg/kg) and were subjected to inflammation induced by Complete Freund's Adjuvant (CFA) and in the zymosan-induced articular inflammation model. DA-1 and DA-2 have been identified for the first time in the leaves of D. alata. LI-DA, EAF-DA and HMF-DA demonstrated a high level of antioxidant activity as measured by ABTS (IC50 ≤ 5.62 μg/mL) and DPPH (IC50 ≤ 11.45 μg/mL). Oral administration of LI-DA (3, 30 and 100 mg/kg), DA-1 (3 mg/kg) and DA-2 (3 mg/kg) showed significantly reduced edema, cold and mechanical allodynia in the CFA-induced inflammation model (24 hours). LI-DA (3, 30, and 100 mg/kg) and DA-1 (3 mg/kg) reduced leukocytes migration into the joint cavity, mechanical allodynia, edema and NO production in mice (24 hours) in the zymosan-induced articular inflammation model. Additionally, DA-2 (3 mg/kg) reduced leukocyte migration and LI-DA (30 mg/kg) reduced protein exudation (24 hours) in zymosan model. DA-1 and DA-2 showed good oral bioavailability and low toxicity predicted by the ProTox model. This is the first chemical and biological study performed of D. alata infusion and two quercetin glycoside derivatives. The results indicated promising potential for the treatment of inflammation, pain, and rheumatism, supporting the traditional use of the infusion obtained from the leaves of D. alata.

Crude oil-water emulsions formed by nozzle type inflow control device

Conventional water-in-oil emulsion studies where shear energy intensity and duration are applied to achieve ‘equilibrium’ emulsion droplet properties may not represent partial emulsion conditions observed in single pass flow through Inflow Control Device (ICD) orifices. Our experiments provide data expected to improve emulsion transport models for partial emulsification processes expected in well completion and production tubulars. Development of a novel flow adaptor apparatus is described together with a laboratory homogeniser enables independent control of shear intensity and duration together with input water volume fraction. The emulsions formed are characterised with a benchtop Nuclear Magnetic Resonance spectrometer for water content and droplet size, viscosity by a rotating bob viscometer and free water/emulsion proportion by optical photography. Experimental results confirmed partial emulsification above 30% V/V, as observed in both previous ICD flow experiments and field observations. Electrical conductivity measurements of the emulsions produced indicated that partial emulsification comprising an oil external emulsion phase together with free water, rather than emulsion inversion, occurs in this system.

Development of an Earth-Field Nuclear Magnetic Resonance Spectrometer: Paving the Way for AI-Enhanced Low-Field Nuclear Magnetic Resonance Technology.

Today, it is difficult to have a high-field nuclear magnetic resonance (NMR) device due to the high cost of its acquisition and maintenance. These high-end machines require significant space and specialist personnel for operation and offer exceptional quality in the acquisition, processing, and other advanced functions associated with detected signals. However, alternative devices are low-field nuclear magnetic resonance devices. They benefit from the elimination of high-tech components that generate static magnetic fields and advanced instruments. Instead, they used magnetic fields induced by ordinary conductors. Another category of spectrometers uses the Earth's magnetic field, which is simple and economical but limited in use. These devices are called Earth-Field Nuclear Magnetic Resonance (EFNMR) devices. This device is ideal for educational purposes, especially for engineers and those who study nuclear magnetic resonance, such as chemistry or other experimental sciences. Students can observe their internal workings and conduct experiments that complement their education without worrying about damaging equipment. This article provides a detailed explanation of the design and construction of electrical technology devices for the excitation of atomic spin resonance using Earth's magnetic fields. It covers all necessary stages, from research to analysis, including simulation, assembly, construction of each component, and the development of comprehensive software for spectrometer control.

In Memoriam: The Life and Scientific Accomplishments of Frank A. L. Anet (1926–2024)

ABSTRACTA memorial tribute detailing the life and scientific accomplishments of Frank A. L. Anet, a pioneer of nuclear magnetic resonance (NMR) spectroscopy who discovered bedrock principles in organic chemistry and magnetic resonance. He was the first to show that nuclear Overhauser effects could provide structural information, significantly impacting future NMR applications. In the 1960s and 1970s, he built entire multinuclear NMR spectrometers operating as high as 396 MHz for protons, detecting nuclei inaccessible to commercial instruments, and operating at very low temperatures for studying molecular structure and dynamics. A titan of physical organic chemistry, Frank made important contributions in the areas of conformational analysis, stereochemistry, isotope effects, NMR relaxation theory, and chemical origins of life.

Synthesis, Structural, and Optical Properties of Modified Poly(vinyl Chloride) Thin Films by Ethylenediamine Loaded with Metal Oxide Nanoparticles

AbstractPoly (vinyl chloride) (PVC) films modified with ethylenediamine (en) and doped by nanoparticles (TiO2, ZnO, NiO, and MgO). A mixture of 0.5 g PVC/en dissolved in THF and 0.01 wt % of nanoparticles were used in doping PVC to produce the nanocomposite films. All modified PVC films were characterized by different analysis techniques such as Fourier Transform Infrared (FTIR), Nuclear Magnetic Resonance Spectrometer (NMR), diffusive reflectance spectroscopy (DRS), X‐ray diffraction analysis (XRD), and scanning electron microscopy (SEM). The DRS was used to analyse the scattered IR energy of the samples at wavelengths between (250–1350 nm). The optical properties and oscillator strength were also studied, the transmittance and reflectance values declined for the PVC films, and the absorption coefficient was observed between (79–89 %). The direct energy gap decreased from 4.6 to 1.9, and the indirect energy gap reduced from 4.3 to 1.9. The XRD exhibited a semi‐crystalline structure and the SEM test exhibited a porous structure of all samples. The Urbach energy was increased from 0.8772 eV to 14.712 eV, single oscillator energy ( ) was also increased from 6.38 eV to 13.69 eV and the dispersion energy increased from 23.40 eV to 70.63 eV. Moreover, the surface roughness parameters Ra and Rq of the PVC films in modified and doping were increased from 3.86 nm to 8.14 nm, and 5.08 nm to 10.10 nm respectively. So, PVC results show increased optical properties after modification with en and doping by NPs are used in the light conversion and aerospace industries.

Super-resolution NMR spectroscopy

Spectral resolution is one of the limiting factors in nuclear magnetic resonance (NMR) spectroscopy of biological systems where signal overlap often interferes with chemical shift assignment as well as dynamics and structure analysis. This problem can be addressed in part by using higher magnetic field NMR spectrometers operating at up to 1.2 GHz 1H frequency to enhance the resolution proportionally with the field strength, and by deuteration in combination with transverse relaxation-optimized spectroscopy that reduces the transverse relaxation rate and proportionally the resonance linewidth of the peaks yielding higher spectral resolution. As a complement or alternative to these expensive and often insufficient approaches, we present here a generally applicable method to reduce the linewidth of peaks in indirect dimensions of multi-dimensional NMR spectra by increasing the number of scans per time increment exponentially as a function of time in order to compensate, in part, the decay of the signal caused by transverse relaxation. This enables to achieve a user-defined linewidth of the peaks without undue increase of the noise. Optimization by including in the number of scans also a cosine apodization function as well as processing spectra with an exponential-cosine window function in the direct dimension results typically in a resolution enhancement (linewidth reduction) by a factor of 1.5–2 in comparison to a standard measurement with a constant number of scans per time increment. This is comparable to the 2-fold resolution enhancement that can be obtained by going from a 600 MHz 1H frequency NMR spectrometer to a 1.2 GHz instrument, or from 1.2 GHz to a spectrum measured hypothetically at 2.4 GHz 1H frequency. A factor of two resolution enhancement causes thereby a signal to noise loss of a factor of three. The sensitivity gain by dynamic number of scan sampling is thereby ∼20 % over the use of a digital apodization function.

Cryogenic and Dissolution DNP NMR on γ-Irradiated Organic Molecules.

Nuclear magnetic resonance (NMR) plays a central role in the elucidation of chemical structures but is often limited by low sensitivity. Dissolution dynamic nuclear polarization (dDNP) emerges as a transformative methodology for both solution-state NMR and metabolic NMR imaging, which could overcome this limitation. Typically, dDNP relies on combining a stable radical with the analyte within a uniform glass under cryogenic conditions. The electron polarization is then transferred through microwave irradiation to the nuclei. The present study explores the use of radicals introduced via γ-irradiation, as bearers of the electron spins that will enhance 1H or 13C nuclides. 1H solid-state NMR spectra of γ-irradiated powders at 1-5 K revealed, upon microwave irradiation, signal enhancements that, in general, were higher than those achieved through conventional glass-based DNP. Transfer of these samples to a solution-state NMR spectrometer via a rapid dissolution driven by a superheated water provided significant enhancements of solution-state 1H NMR signals. Enhancements of 13C signals in the γ-irradiated solids were more modest, as a combined consequence of a low radical concentration and of the dilute concentration of 13C in the natural abundant samples examined. Nevertheless, ca. 700-800-fold enhancements in 13C solution NMR spectra of certain sites recorded at 11.7 T could still be achieved. A total disappearance of the radicals upon performing a dDNP-like aqueous dissolution and a high stability of the samples were found. Overall, the study showcases the advantages and limitations of γ-irradiated radicals as candidates for advancing spectroscopic dDNP-enhanced NMR.

Calcium ions do not influence the Aβ(25–35) triggered morphological changes of lipid membranes

We have studied the effect of calcium ions (Ca2+) at various concentrations on the structure of lipid vesicles in the presence of amyloid-beta peptide Aβ(25–35). In particular, we have investigated the influence of calcium ions on the formation of recently documented bicelle-like structures (BLSs) emerged as a result of Aβ(25–35) triggered membrane disintegration. First, we have shown by using small-angle X-ray and neutron scattering that peptide molecules rigidify the lipid bilayer of gel phase DPPC unilamellar vesicles (ULVs), while addition of the calcium ions to the system hinders this effect of Aβ(25–35). Secondly, the Aβ(25–35) demonstrates a critical peptide concentration at which the BLSs reorganize from ULVs due to heating and cooling the samples through the lipid main phase transition temperature (Tm). However, addition of calcium ions does not affect noticeably the Aβ-induced formation of BLSs and their structural parameters, though the changes in peptide's secondary structure, e.g. the increased α-helix fraction, has been registered by circular dichroism spectroscopy. Finally, according to 31P nuclear magnetic resonance (NMR) measurements, calcium ions do not affect the lipid-peptide arrangement in BLSs and their ability to align in the magnetic field of NMR spectrometer. The influences of various concentrations of calcium ions on the lipid-peptide interactions may prove biologically important because their local concentrations vary widely in in-vivo conditions. In the present work, calcium ions were investigated as a possible tool aimed at regulating the lipid-peptide interactions that demonstrated the disruptive effect of Aβ(25–35) on lipid membranes.

Study on the Effect of Sorghum Flour Particle Size on the Storage Quality of Leavened Pancakes.

Pancakes prepared with sorghum flour possess a high nutritional value, yet their quality is unstable and prone to degradation during storage. This instability can be attributed to the particle size of coarse cereal powder, which significantly influences the quality of flour products during storage. In this study, changes in the quality of these pancakes, prepared with varying particle sizes of sorghum flour, were meticulously analyzed during cold storage using advanced instruments such as a texture analyzer, nuclear magnetic resonance spectrometer, differential scanning calorimeter, X-ray diffractometer, and Fourier transform infrared spectrometer. Findings revealed that the hardness of leavened pancakes significantly increased over time. After a refrigeration period of 7 days, the hardness of wheat flour leavened pancakes increased by 56.60%. However, with a decrease in the particle size of sorghum flour, the increase in hardness diminished, thereby delaying the aging process of the pancakes. As the storage duration was extended, moisture migration within the pancakes occurred, and the sorghum flour pancakes with a smaller particle size exhibited a reduced moisture change rate, indicating an enhanced water holding capacity. In comparison to their wheat flour counterparts, sorghum flour leavened pancakes exhibited a substantial reduction in retrogradation enthalpy and crystallinity. The inclusion of sorghum flour effectively inhibited amylopectin recrystallization, thus slowing down the aging process of the pancakes. This inhibitory effect was more evident with decreasing sorghum flour particle sizes. Fourier transform infrared data indicated no significant alterations in absorption peaks across various wavelengths during cold storage. Although starch short-range orderliness increased with storage time, the use of sorghum flour with smaller particles reduced the degree of short-range orderliness in starch molecules throughout the cold storage period. Sorghum flour with a smaller particle size can inhibit water migration and amylopectin recrystallization, which subsequently delays pancake aging and enhances its quality stability during storage.

Effect of Dicarboxylic Acid Chain Length on the Tribological Properties of Aqueous Polyether Esters

ABSTRACTThis article presents the preparation of environmentally friendly water‐soluble lubricant additives. Adipic acid (AA), sebacic acid (SA) and dodecanedioic acid (DA) were individually subjected to esterification reactions with polyethylene glycol 1500 (PEG1500) to prepare a class of water‐soluble polyether esters (AAPEE1500, SAPEE1500 and DAPEE1500) (referred to as XAPEE1500s) that exhibit excellent water solubility and do not contain environmentally harmful elements. First, the molecular structure characterisation and functional group analysis of these additives will be conducted using an infrared spectrometer and a nuclear magnetic resonance spectrometer. Subsequently, the frictional properties of the additives in the base liquid (deionised water) will be investigated using an SRV‐V tribometer, Falex pin‐on‐disc tribometer and screw torque tester. The surface morphology of wear scars will be characterised and analysed using scanning electron microscopy (SEM) and a non‐contact 3D profilometer. Finally, the lubrication mechanism of the DAPEE1500 additive will be analysed using X‐ray photoelectron spectroscopy (XPS). The results indicate that the optimal lubrication performance is achieved when the added mass fraction of DAPEE1500 is at 3%. Compared with 0.5 wt% DAPEE1500, the average friction coefficient of 3 wt% DAPEE1500 decreased from 0.285 to 0.122, and the wear volume decreased from 25.52 × 10−5 μm3 to 10.96 × 10−5 μm3. The lubrication mechanism of polyether ester is the result of the combined action of its polar ester functional groups and long carboxylic acid chains in the structure. These polar functional groups can form a relatively firm adsorption film on the friction surface, while the long carboxylic acid chains act as a brush‐like isolating layer, thus demonstrating superior anti‐wear and anti‐friction performance.

Analysis of <i>cis</i>-isomer-enriched dihydroquercetin sample by 1D and 2D NMR spectroscopy

Introduction. The structure of dihydroquercetin (DHQ) is characterized by two chiral centers at positions 2 and 3 of the benzopyran cycle, resulting in possible diastereomers: trans- and cis-isomers. Therefore, the development of methods for qualitative and quantitative control of DHQ diastereomers in analyzed samples is essential for patient safety management. Nuclear magnetic resonance (NMR) spectroscopy is one of the physicochemical methods that can be used for this purpose.Aim. The study objective was to accumulate the analytical and structural characteristics of cis-DHQ by NMR spectroscopy of the spheroidal form of this flavonoid (DHQs).Materials and Methods. 1D 1H, 1H,1H-COSY, 1H,1H-NOESY, and 1H,13C-HSQC NMR spectra were acquired at 298 K on an 800 MHz NMR spectrometer equipped with a TXI triple resonance probe. The number of scans was 32. The mixing time in the NOESY experiment was 400 ms. The 1H and 13C were analyzed using CcpNmr software. The dihedral angles were calculated by applying the Karplus equation.Results and discussion. In trans-DHQ, the chemical shift values for H2 and H3 are 4.93 ppm and 4.52 ppm, respectively, and in cis-DHQ they are 5.31 ppm and 4.20 ppm, respectively. The spin-spin coupling constants between H2 and H3 of trans- and cis-DHQ are 12.00 Hz and 2.40 Hz, respectively. Thus, the dihedral angles for the trans- and cis-isomers are 154° and 64°, respectively. We found that DHQs contains 12.5 % of the cis-isomer.Conclusion. Our experiments confirmed that NMR spectroscopy can discriminate between trans- and cis-DHQ based on the chemical shift values for the cross-peaks of H2 and H3. The second major finding was that this method can be considered as a more selective quantitative analysis than HPLC with UV detection without reference. One of the most important results of this study for drug development is the updated information on the structural parameters of DHQ diastereomers in the liquid phase.