Nuclear Magnetic Resonance Spectroscopy Research Articles

The Insecticidal Activity of Secondary Metabolites Produced by Streptomyces sp. SA61 against Trialeurodes vaporariorum (Hemiptera: Aleyrodidae).

Trialeurodes vaporariorum Westwood poses a significant threat to vegetable and ornamental crops in temperate zones, resulting in notable reductions in yield and substantial economic burdens. In order to find compounds with high insecticidal activity against T. vaporariorum, five compounds were isolated and identified from the crude extract of Streptomyces sp. SA61. These include three new polyketides, named strekingmycins F-H (1-3); one new diterpenoid, named phenalinolactone CD8 (4); and one known compound, strekingmycin A (5). Their structures were analyzed using high-resolution electrospray ionization mass spectrometry and one-dimensional and two-dimensional nuclear magnetic resonance spectroscopy data and by comparing them with previously reported data. The insecticidal activities of compounds 1-5 against T. vaporariorum were evaluated. Among them, compound 5 exhibited the highest insecticidal activity, with an LC50 of 6.949 mg/L against T. vaporariorum at 72 h using the leaf-dip method. Lower insecticidal activities were found in compounds 1-4, with LC50 values of 22.817, 19.150, 16.981 and 41.501 mg/L, respectively. These data indicate that strekingmycin could be a potential candidate for a novel insecticide to control T. vaporariorum.

Liquid Handling Technologies: A Study through Major Discoveries and Advancements

Liquid handling is an essential process in laboratories involving automatically transferring accurate amounts of liquids for various task completions such as sample preparation, pipetting, dilution, and mixing. Automated liquid handling systems (ALHS) help to minimize the errors, complications, and difficulties that are faced with manual methods of liquid handling by efficiently enhancing the accuracy, precision, and reproducibility of experimental workflows and have transformed life sciences aiding research in various fields. Processes like Nuclear Magnetic Resonance (NMR) spectrometry, mass spectrometry, and acoustic droplet ejection with ALHS showcase tremendous potential. Outdated manual machinery is being replaced rapidly with automated tools. We have observed that these laboratory setups are sophisticated and costly. It is challenging to access such technologies, especially in poor or developing countries. At the nanoscale level, handling and evaporation of biomaterials becomes a great issue. Multitudinous devices can combat the cost issue along with utilization of single equipment without the enhancement of add-on modules. Liquid handling devices enhance the quality of experiments contributing to efficient dealing of circumstances like COVID-19. They aid in genomics and proteomics and play a pivotal role in liquid manipulation, drug screening, quantifications, forensic studies and many more. Liquid handling devices with robotic equipment can perform multiple tasks and can assist in a wide range of fields. We anticipate that in the coming years, our laboratories will be furnished with advanced, robotic technologies and cause a revolution in the scientific scenery.

Dose-dependent effects of transcranial photobiomodulation on brain temperature in patients with major depressive disorder: a spectroscopy study.

This study aimed to evaluate the dose-dependent brain temperature effects of transcranial photobiomodulation (t-PBM). Thirty adult subjects with major depressive disorder were randomized to three t-PBM sessions with different doses (low: 50 mW/cm2, medium: 300 mW/cm2, high: 850 mW/cm2) and a sham treatment. The low and medium doses were administered in continuous wave mode, while the high dose was administered in pulsed wave mode. A 3T MRI scanner was used to perform proton magnetic resonance spectroscopy (1H-MRS). A voxel with a volume of 30 × 30 × 15 mm3 was placed on the left prefrontal region. Brain temperature (°C) was derived by analyzing 1H-MRS spectrum chemical shift differences between the water (~ 4.7 ppm) and N-acetyl aspartate (NAA) (~ 2.01 ppm) peaks. After quality control of the data, the following group numbers were available for both pre- and post-temperature estimations: sham (n = 10), low (n = 11), medium (n = 10), and high (n = 8). We did not detect significant temperature differences for any t-PBM-active or sham groups post-irradiation (p-value range = 0.105 and 0.781). We also tested for potential differences in the pre-post variability of brain temperature in each group. As for t-PBM active groups, the lowest fluctuation (variance) was observed for the medium dose (σ2 = 0.29), followed by the low dose (σ2 = 0.47), and the highest fluctuation was for the high dose (σ2 = 0.67). t-PBM sham condition showed the overall lowest fluctuation (σ2 = 0.11). Our 1H-MRS thermometry results showed no significant brain temperature elevations during t-PBM administration.

Synthesis and Performance Evaluation of Metallocene Polyalphaolefins (mPAO) Base Oil with Anti-Friction and Anti-Wear Properties

Anti-wear and anti-oxidation abilities are two key properties of lubricants that play a crucial role in ensuring long-term stable equipment operation. In this study, we aimed to develop a base oil with good anti-oxidation and anti-wear properties for use under extreme pressure. The as-prepared metallocene polyalphaolefin (mPAO) was chemically modified using the trifluoromethanesulfonic acid (TfOH) catalysis through an alkylating reaction with triphenyl phosphorothioate (TPPT). During the experiments, when the reaction temperature exceeded 70 °C or the concentration of TfOH exceeded 2.67%, the β-scission reaction in the alkylation process became significantly more pronounced. The physical and chemical properties of TPPT-modified mPAO (T-mPAO) were evaluated by nuclear magnetic resonance spectroscopy, Fourier trans-form infrared spectroscopy, gel–permeation chromatography, and ASTM standards. T-mPAO showed significantly improved antioxidant capacity, with the initial oxidation temperature increasing by 32 °C compared to the base oil, and it exhibited the slowest increase in acid number in the 96-h oven oxidation test. The tribological tests showed that T-mPAO had the lowest friction coefficient, wear track, and wear rate (72.7% lower than that of mPAO) as well as the highest PB (238 kg) and PD (250 kg) among all tested samples. Compared to mPAO, the average friction coefficient of TPPT-modified mPAO in the four-ball friction test was reduced by 30.5%, and by 16.4% in the TE77 reciprocating friction test. Based on the experimental results, T-mPAO had strong anti-oxidation ability and excellent lubricating performance.The successful synthesis of multifunctional mPAO has enabled lubricant base oil additization, making it possible to use it in more demanding work scenarios, greatly broadening its application scope and making lubricant formulation blending more flexible.

Exceptional stability of the sugammadex-solasodine complex: Insights from experimental and theoretical studies

Sugammadex (SGM) is the first cyclodextrin (CD)-based selective relaxant binding agent. We investigated its ability to capture natural aminosteroid phytotoxins, and assessed its potential as an antidote for intoxication. Solasodine (SS), a toxic alkaloid from the Solanaceae family, was chosen as the model compound. Complexation was studied using nuclear magnetic resonance (NMR) spectroscopy, molecular modelling, and isothermal titration calorimetry (ITC). NMR in various D2O/DMSO‑d6 media revealed a particularly stable inclusion-type complex, identifying a slow exchange process between the CD and the aminosteroid along with a less significant fast exchange between DMSO and SGM. Using various NMR techniques, the structure and kinetic/thermodynamic parameters of the inclusion complex were explored. Theoretical calculations showed the secondary amino head of SS near the carboxylate ends of the SGM sidechains, facilitating intermolecular ionic interactions. ITC experiments in an aqueous environment provided Ka stability constants of 7.03 × 106 M−1 and 4.17 × 106 M−1 at 25 °C and 37 °C, respectively, similar to previously reported SGM complexes with aminosteroid neuromuscular blockers. Finally, SGM significantly increased cell survival and reduced SS toxicity in mHippoE-14 mouse hippocampal embryonic cells, supporting the hypothesis that SGM could act as an antidote to SS's toxic effects.

Removal of acetyl-rich impurities from chitosan using liquefied dimethyl ether

Chitosan, recognized for its excellent biodegradability, biocompatibility, and antibacterial properties, has several potential applications, particularly in the biomedical field. However, its widespread use is hindered by inherent limitations such as low mechanical strength and safety concerns arising from a low degree of deacetylation and the presence of impurities. This study aimed to introduce an innovative purification method for chitosan via liquefied dimethyl ether (DME) extraction. The proposed technique effectively addresses the challenges associated with chitosan by facilitating deacetylation and impurity removal. Liquefied DME is emerging as the extraction solvent of choice owing to its advantages, such as low boiling point, safety, and environmental sustainability. The degree of deacetylation of chitosan was extensively evaluated using thermogravimetric–differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, intrinsic viscosity measurements, solid-state nuclear magnetic resonance spectroscopy and X-ray photoelectron spectroscopy, and elemental analysis. The solubility of chitosan in liquefied DME was investigated using Hansen solubility parameters. This study contributes to the improvement of the safety profile of chitosan, thereby expanding its potential applications in various fields. The use of liquefied DME as an extraction solvent proved to be efficient in addressing the existing challenges and is consistent with the principles of safety and environmental sustainability.

A novel bio-based epoxy resin curing agent of gluconic aldehyde amine for the preparation of epoxy resin film

To resolve the shortage of fossil resources, gluconic aldehyde amine (GAA) was prepared from glucose via Mannich reaction, and then was used to cure E901 epoxy resin to prepare glucose-based epoxy resin film (GAAF). Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy indicated the successful synthesis of GAA. With the increase of Mannich reaction temperature, the tensile strength and elongation at break of GAAF firstly increased and then decreased, as well as the thermal stability increased. The GAAF-60 sample exhibited maximum tensile strength of 47.5 MPa, which were higher than that prepared by petroleum-based phenolic amine and lignin-based phenolic amine, respectively. The synthesis of GAA presented a novel bio-based epoxy resin curing agent for the preparation of epoxy resin film.

Novel Eco‐Friendly Electrode: Copper Nanoparticle‐Doped MWCNTs for Green Electro‐Organic Synthesis of 1,2,3‐Triazoles With ChCl/Urea as a Solvent and Cocatalyst

ABSTRACTMeticulous electrode design is pivotal in advancing greener and more sustainable electro‐organic synthesis practices. In this research, our team designed and synthesized a copper‐doped electrode on multiwalled carbon nanotubes (MWCNTs) and characterized it using Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) analysis, X‐ray diffraction (XRD) analysis, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) analysis. Subsequently, this electrode was utilized as a catalyst at the electrode surface, serving as a cathode in electro‐oxidation reactions in the presence of phenylacetylene, sodium azide (NaN3), and benzyl halide for the production of 1,2,3‐triazole derivatives under ambient temperature, within a 30‐min reaction time, and at atmospheric pressure, achieving an efficiency level ranging from good to excellent, specifically between 88% and 96%. The synthesized 1,2,3‐triazole derivatives were identified using proton nuclear magnetic resonance (1H NMR) spectroscopy, CHN elemental analysis, and melting point. In this paper, choline chloride/urea deep eutectic solvents (DES) serve multiple roles in the reaction mechanism. They function as solvents and co‐catalysts, generate weak bases, and provide numerous advantages in green chemistry. These advantages include low toxicity, reduced environmental risks, improved atom economy, and non‐volatility, making them safer alternatives to traditional organic solvents.

Synthesis and characterization of amphiphilic Poly(2-hydroxyethyl acrylate-g-α-Methyl-β-Alanine) by Nitroxide-Mediated Polymerization Using “grafting through” approach

Oligomeric poly(α-methyl-β-alanine)with vinyl end-group (PmBA) was synthesized via base-catalyzed hydrogen-transfer polymerization (HTP) of molten methacrylamide (MAm) in the presence of sodium tert-butoxide (t-BuONa). The PmBA was used as a comonomer in the synthesis of amphiphilic poly(2-hydroxyethyl acrylate-g-α-methyl-β-alanine) (PHEA-g-PmBA)via nitroxide-mediated polymerization (NMP)and "grafting through" approach.The graft copolymer formation was confirmed byproton nuclear magnetic resonancespectroscopy (1H-NMR), Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and static light scattering (SLS)measurements. Thermogravimetric analysis of the amphiphilicPHEA-g-PmBAexhibited a multi-step decomposition curve corresponding to the α-methyl-β-alanine and the 2-hydroxyethyl acrylate blocks at about 306, 369, and 403 °C.DSC curve of the copolymer has a baseline shift at −12.87 °C attributed to the glass transition temperature. SLS analysis of the final product resulted in a weight average molecular weight of 83.6 kDa. The spectroscopic and thermal analyses proved that amphiphilicPHEA-g-PmBA was successfully synthesized through HTP and NMP.

Expanding the tool box for native structural biology: 19F dynamic nuclear polarization with fast magic angle spinning.

Obtaining atomic-level information on components in the cell is a major focus in structural biology. Elucidating specific structural and dynamic features of proteins and their interactions in the cellular context is crucial for understanding cellular processes. We introduce 19F dynamic nuclear polarization (DNP) combined with fast magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy as a powerful technique to study proteins in mammalian cells. We demonstrate our approach on the severe acute respiratory syndrome coronavirus 2 5F-Trp-NNTD protein, electroporated into human cells. DNP signal enhancements of 30- to 40-fold were observed, translating into over 1000-fold experimental time savings. High signal-to-noise ratio spectra were acquired on nanomole quantities of a protein in cells in minutes. 2D 19F-19F dipolar correlation spectra with remarkable sensitivity and resolution were obtained, exhibiting 19F-19F cross peaks associated with fluorine atoms as far as ~10 angstroms apart. This work paves the way for 19F DNP-enhanced MAS NMR applications in cells for probing protein structure, dynamics, and ligand interactions.

J-coupling NMR spectroscopy with nitrogen vacancy centers at high fields

A diamond-based sensor utilizing nitrogen-vacancy (NV) center ensembles permits the analysis of micron-sized samples through nuclear magnetic resonance (NMR) techniques at room temperature. Current efforts are directed towards extending the operating range of NV centers into high magnetic fields, driven by the potential for larger nuclear spin polarization of the target sample and the presence of enhanced chemical shifts. Especially interesting is the access to J-couplings as they carry information of chemical connectivity inside molecules. In this work, we present a protocol to access J-couplings in both homonuclear and heteronuclear cases with NV centers at high magnetic fields. Our protocol leads to a clear spectrum exclusively containing J-coupling features with high resolution. This resolution is limited primarily by the decoherence of the target sample, which is mitigated by the noise-filtering capacities of our method. Published by the American Physical Society 2024

Improving Stroke Outcome Prediction Using Molecular and Machine Learning Approaches in Large Vessel Occlusion.

Introduction: Predicting stroke outcomes in acute ischemic stroke (AIS) can be challenging, especially for patients with large vessel occlusion (LVO). Available tools such as infarct volume and the National Institute of Health Stroke Scale (NIHSS) have shown limited accuracy in predicting outcomes for this specific patient population. The present study aimed to confirm whether sudden metabolic changes due to blood-brain barrier (BBB) disruption during LVO reflect differences in circulating metabolites and RNA between small and large core strokes. The second objective was to evaluate whether integrating molecular markers with existing neurological and imaging tools can enhance outcome predictions in LVO strokes. Methods: The infarction volume in patients was measured using magnetic resonance diffusion-weighted images, and the 90-day stroke outcome was defined by a modified Rankin Scale (mRS). Differential expression patterns of miRNAs were identified by RNA sequencing of serum-driven exosomes. Nuclear magnetic resonance (NMR) spectroscopy was used to identify metabolites associated with AIS with small and large infarctions. Results: We identified 41 miRNAs and 11 metabolites to be significantly associated with infarct volume in a multivariate regression analysis after adjusting for the confounders. Eight miRNAs and ketone bodies correlated significantly with infarct volume, NIHSS (severity), and mRS (outcome). Through integrative analysis of clinical, radiological, and omics data using machine learning, our study identified 11 top features for predicting stroke outcomes with an accuracy of 0.81 and AUC of 0.91. Conclusions: Our study provides a future framework for advancing stroke therapeutics by incorporating molecular markers into the existing neurological and imaging tools to improve predictive efficacy and enhance patient outcomes.

Enhancing Sensitivity in the Hyphenation of High-Performance Liquid Chromatography to Benchtop Nuclear Magnetic Resonance Spectroscopy at Isocratic and Onflow Conditions.

The onflow hyphenation of high-performance liquid chromatography (HPLC) in adsorption mode with a benchtop 1H nuclear magnetic resonance (NMR) spectrometer is described for the first time. Protonated solvents and isocratic conditions are used. The sensitivity was increased by choosing suitable NMR acquisition parameter as well as optimizing injection parameters and postacquisition data processing methods. With optimized conditions, the limit of detection (LOD) and the limit of quantification (LOQ) were LOD = 0.010 g L-1 and LOQ = 0.031 g L-1 for the methoxy 1H of methyl paraben at 4.07 ppm, LOD = 0.038 g L-1 and LOQ = 0.134 g L-1 for the aromatic 1H of pentyl paraben between 7.00 and 8.50 ppm. These are expressed in injection concentration and are comparable to existing HPLC hyphenation with high-field NMR spectrometers. The analysis of a 2 g L-1 paraben mixture, far below the legal limits for usage in cosmetics, illustrates the applicability of the method. Taking advantage of the spectral resolution, chromatographically overlapping peaks are resolved using analyte-specific NMR elution traces. A methodology is detailed to facilitate the transfer of the optimized method to other (analyte) systems.

Nanoscale lipid-methylprednisolone conjugates: Effective anti-inflammatory, antioxidant, and analgesic agents

In this study, we have investigated new lipid-drug conjugates (LDCs) of methylprednisolone. Methylprednisolone is a corticosteroid, used for the potential treatment of inflammatory diseases. The LDCs 1–2; methylprednisolone palmitate (1) and methylprednisolone palmityl carbonate (2), were designed by conjugating a C16 aliphatic chain via an ester or carbonate bond, respectively. Their structures were comprehensively characterized using mass spectrometry, nuclear magnetic resonance spectroscopy, and infrared spectroscopy. These LDCs 1–2 were subsequently formulated into nanoscale particles (NPs) using ethanol injection method. Hydrogenated soybean phosphatidylcholine (HSPC) and tween-80 served as excipients in the NPs formulation. Characterization via dynamic light scattering, scanning electron microscopy, and atomic force microscopy confirmed the formation of spherical NPs with a diameter ranging from 100 to 120 nm. The LDCs NPs 1–2 exhibited excellent stability for about a month, with good polydispersity (around 0.2) and a negative zeta potential between −20 mV and −34 mV. Encapsulation efficiency of the LDCs within the LDCs NPs 1–2 surpassed 90 %, as determined by HPLC analysis. In vitro cytotoxicity studies utilizing LPS-activated THP-1 cells demonstrated no adverse effects associated with LDCs NPs 1–2 at concentrations up to 100 μg/mL. Furthermore, the LDCs NPs 1–2 effectively retained the anti-inflammatory activity, as evidenced by the suppression of IL-1β, TNF-α, and MCP-1 secretion in LPS-stimulated THP-1 cells. The therapeutic potential of these LDCs NPs 1–2 was further evaluated in rat intervertebral disc-derived nucleus pulposus cells (NPCs). Curative and preventive treatment regimens with the free drug and LDCs NPs 1–2 were employed. Quantitative PCR analysis revealed a significant downregulation of pain and inflammation markers (Substance P and COX-2) along with a concomitant upregulation of antioxidant markers (GPX1, PRDX1, and SOD1) in NPCs treated with both the drug and LDCs NPs 1–2 compared to oxidative stress-induced and control NPCs. Our novel LDCs NPs 1–2 exhibited promising therapeutic potential for treating inflammatory and pain related complications, (including intervertebral disc degeneration). This promise stems from their multifaceted properties, encompassing anti-inflammatory, antioxidant, and analgesic effects. Further research is warranted to fully explore LDCs NPs 1–2 as potential drug candidates in future pre-clinical and clinical trials.

Quantitative Blood Serum IVDr NMR Spectroscopy in Clinical Metabolomics of Cancer, Neurodegeneration, and Internal Medicine.

Despite more than two decades of metabolomics having joined the "omics" scenery, to date only a few novel blood metabolite biomarkers have found their way into the clinic. This is changing now by massive large-scale population metabolic phenotyping for both healthy and disease cohorts. Here, nuclear magnetic resonance (NMR) spectroscopy is a method of choice, as typical blood serum markers can be easily quantified and by knowledge of precise reference concentrations, more and more NMR-amenable biomarkers are established, moving NMR from research to clinical application. Besides customized approaches, to date two major commercial platforms have evolved based on either 600MHz (14.1 Tesla) or 500MHz (11.7 Tesla) high-field NMR systems. This chapter provides an introduction into the field of quantitative in vitro diagnostics research (IVDr) NMR at 600 MHzand its application within clinical research of cancer, neurodegeneration, and internal medicine.

NMR-Based Analysis of Cellular Central Energy Metabolism and Exchange Rates.

Cell cultures are widely used in studies to gain mechanistic insights of metabolic processes. The foundation of these studies lies on the quantification of intracellular and extracellular metabolites, and nuclear magnetic resonance (NMR) is one of the key analytical platforms used to this aim. Among the factors influencing the quality of the produced data are the sampling procedures as well as the acquisition and processing of spectroscopic data. Here we provide our workflow for obtaining quantitative metabolic data from adherent mammalian cells using NMR spectroscopy. The described protocol is compatible with other analytical methods like LC- or GC-MS-based lipidomics and untargeted metabolomics from the same sample. We also show how the collected extracellular data can be used to extract exchange flux rates, particularly useful for flux analysis studies and metabolic engineering of human-induced pluripotent stem cells.

B-166 Differentiation of Aziridine Functionality from Related Functional Groups in Protonated Analytes by Using Selective Ion-Molecule Reactions

Abstract Background The development of better methods for the rapid and reliable identification of unknown compounds in mixtures is urgently needed in drug development. Aziridines, in particular, are used for drug synthesis but are potentially mutagenic and carcinogenic compounds. However, the detection and identification of these compounds pose challenges for many analytical methods, such as Nuclear Magnetic Resonance (NMR) spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), and X-ray crystallography. These techniques are time-consuming and often require large quantities of highly pure compounds. Methods Therefore, this study demonstrates that selective gas-phase ion-molecule reactions of protonated analytes with neutral tris(dimethylamino)borane (TDMAB), followed by diagnostic collision-activated dissociation (CAD), can be used to differentiate aziridines from structurally related compounds in a modified linear quadrupole ion trap (LQIT) mass spectrometer. The experiments were performed using an atmospheric pressure chemical ionization (APCI) source in positive ion detection mode. TDMAB was purchased from Sigma-Aldrich and used without purification. It was introduced into the ion trap (2 mtorr of helium buffer gas) via an external reagent mixing manifold through a syringe pump at a flow rate of 10 μL h-1 and diluted with helium before entering the ion trap through a variable leak valve. All analytes were prepared at a concentration of 1 mM in methanol. The protonated analytes were transferred into the ion trap, isolated, and allowed to react with TDMAB (MS2 experiments). Results Product ions formed upon reactions of the analyte ions with TDMAB were subjected to a collision-activated dissociation (CAD) experiment (MS3 experiments). CAD on product ions produced diagnostic fragment ions with 25- and 43 m/z-units lower m/z values than the adduct - DMA product ions. Quantum chemical calculations were employed using the Gaussian 16 program calculated at the M06-2X/6-311++G(d,p) level of theory to provide theoretical foundation and to explore the underlying mechanisms of the observed gas-phase reactions. None of the tested structurally related analytes produced a similar fragmentation pattern Conclusions The innovative approach presented in this study offers a promising avenue for enhancing efficiency and accuracy in drug development. The successful differentiation of aziridine is an alternative method in overcoming the limitation of traditional techniques. The findings from the research contributes to the advancement of analytical techniques, addressing critical issues in identifying impurities in drug products. The versatility of the methods extends beyond drug developments, making it applicable in various other fields such as in molecular diagnostics, metabolism and laboratory medicines.

Chemical Bonds Formed in Solid Wood by Reaction with Maleic Anhydride and Sodium Hypophosphite

The reaction of wood with maleic anhydride (MA) and sodium hypophosphite (SHP) has been identified as a viable modification method, with macroscopical properties indicating formation of cross-linking to explain the results. However, the chemical reaction between wood and the modification reagents has not been studied yet. To resolve this, the reaction was studied with solid-state 13C cross-polarization magic-angle-spinning (CP-MAS) and 31P MAS nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) to reveal the formation of bonds between wood components, MA and SHP during the treatments to explain the formation of cross-linking and the possible fixation of phosphorus in wood. XPS, solid state 13C and 31P MAS NMR revealed the maleation of wood in the absence of SHP, whilst its presence led to forming a succinic adduct observed through the C-P bond formation, as evidenced by the loss of the maleate C=C bonds at around 130 ppm and the upfield shift of the peak at 165–175 ppm, which was also significantly smoothed, as well as the increase in a peak at 26 ppm due to the reaction between the maleate group and SHP; however, the C-P-C bond could not be unambiguously rationalized from the obtained data. On the other hand, a resonance line at 16 ppm in 31P MAS NMR and the peaks in the XPS P 2p spectrum suggested the formation of a cross-linked structure at low concentrations of SHP, which was more likely to be phosphonate (C-P-O) than organophosphinic acid (C-P-C). The results herein provide a greater fundamental understanding of the mechanisms involved in the reaction of wood, MA and SHP, providing further scope for improved treatment systems in the future.

B-280 Nmr-based biomaker measurement determines high-dose methotrexate elimination rates in lymphoma and leukemia treatment

Abstract Background The cytotoxic methotrexate (MTX) is used in high doses in lymphoma and acute lymphocytic leukemia (ALL) treatment. A therapeutic plasma dose range is crucial to minimize MTX accumulation and prolonged exposure, which can lead to myelosuppression and other adverse effects. Determining MTX elimination prior to drug administration is difficult, given its non-linear clearance. Here we present a model to predict MTX elimination rates based on metabolite measurement in patients receiving high-dose methotrexate, using nuclear-magnetic resonance (NMR) spectroscopy. Methods A series of 26 residual sera from patients receiving MTX infusions as per treatment protocols for CNS lymphoma (MATRIX protocol, 3.5 g/m2 over four hours) and ALL (GMALL protocol, 1.5 g/m2 over 24 hours) were collected from patients at the University Hospital Regensburg at four timepoints (t0, t24, t42, and t48). Serum was NMR-measured in five replicates. NMR spectra for each sample were characterized and relevant parameters extracted. First order elimination constants were modeled for two MTX dosage regimes (<4 g, ≥4 g) using characterized NMR features from samples measured at t0. Results Metabolomic and lipidomic biomarkers measured at baseline (t0) were able to accurately predict MTX elimination rate constant k, determined by fitting MTX levels at a t24, t42, and t48, using first order c(t)∼c0*e(-kt) kinetic function (>4 g: R2 = 0.475, p-value < 0.05; ≤4 g: R2 = 0.918, p-value < 0.01) (Fig. A). Results were cross-validated with five-time repeated three-fold cross-validation. Performance values are given as means of the folds. Conclusions NMR-measured biomarkers can predict dose-dependent MTX elimination rates in patients receiving high-dose MTX, presenting a novel method to predict MTX clearance, allowing for personalized dose-monitoring and minimization of adverse events. Validation with a larger cohort is required.

Characterization of Macrocyclic Peptide Drug Interactions with Bile Salts and Biorelevant Colloids via Single Amino Acid Mutations and 1H Nuclear Magnetic Resonance (NMR) Spectroscopy

There is growing interest in the oral delivery of poorly permeable peptide drugs; however, the effect of biorelevant colloids found in the aqueous gastrointestinal environment on peptide drug solution behavior has been largely understudied. In this work, we detail the molecular level interactions between octreotide, a water-soluble macrocyclic peptide drug, and biorelevant colloids, i.e. bile salt micelles and bile salt-phospholipid mixed micelles, via dialysis membrane flux experiments and proton nuclear magnetic resonance (1H NMR) spectroscopy. A modified alanine scan was employed to generate eight mutated octreotide analogs; the impact of individual amino acid mutations on peptide dialysis membrane flux rates in micellar (trihydroxy and dihydroxy) bile salt solutions as well as fasted state simulated intestinal fluid (FaSSIF) and fed state simulated intestinal fluid (FeSSIF) was evaluated and compared against the parent peptide, octreotide. We show that octreotide interacts more strongly with dihydroxy bile salt micelles than trihydroxy bile salt micelles in solution, and in FaSSIF/FeSSIF media, octreotide mainly interacts with the phospholipid component. These interactions are largely mediated by hydrophobic interactions of octreotide's aromatic residues as well as electrostatic interactions between octreotide's basic Lys residue and terminal amine.