Northern Sichuan Basin Research Articles

Genesis of the Wuchiapingian Formation Tuffs and Their Relationship with the Tectonic Background of the Kaijiang–Liangping Trough in the Northern Sichuan Basin

Controversy surrounds the forming time and tectonic background of the Kaijiang–Liangping Trough in the northern Sichuan Basin. The Wuchiapingian Formation, surrounding this Late Permian trough, contains tuffs, and industrial gas reservoirs have been discovered. However, the genesis of these tuffs, revealed by the drilling wells, remains unclear. In the present work, we analyzed the samples of sedimentary tuff from the core of the study area by macroscopic and microscopic analysis, combined with whole-rock major and trace element analysis, zircon U-Pb dating, and zircon trace element analysis, defining the genesis of the Wuchiapingian Formation tuffs around the Kaijiang–Liangping Trough, in an attempt to describe the initial tectonic context of the trough. The U-Pb ages of the tuffs measured in this study range from 255 to 259 Ma. They are slightly later than the activity of the Emeishan Large Igneous Province. Considering the trough’s distance from the center of the Emeishan Large Igneous Province and its location in the outer zone, it is more likely associated with acidic volcanic eruptions of the island arc. The arc was formed by the subduction activity of the Mianlue Ocean beneath the northern Yangtze Plate. In terms of the timing of activity and the tectonic position of the subduction zone, the Kaijiang–Liangping trough in the northern Sichuan Basin is more closely related to the closing of the Mianlue Ocean.

Hydrographic restriction conditions in the Middle and Upper Yangtze region during the Early Silurian post-glacial transgression: Constraints from major, trace elemental geochemistry and Mo-TOC relationship

Redox-sensitive trace metals have not only been widely used as the proxy for palaeoredox potential due to the strong enrichments under reducing conditions but also provide critical information into water-mass properties, such as the degree of basin restriction. In order to reveal the Early Silurian post-glacial transgression hydrographic restriction conditions throughout the Middle and Upper Yangtze region, trace metal concentrations and organic geochemical data of the lower Longmaxi Formation were analyzed by the Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Leco combustion techniques. We analyzed the hydrographic restriction conditions and redox conditions of different depocenters, including the Southern, Eastern, and Northern Sichuan Basin depocenters and the Western Hubei Region depocenter. The sedimentary Mo-TOC relationship, MoEF-UEF covariation, and upwelling intensity suggest that the Southern, Eastern Sichuan Basin depocenters and the Western Hubei Region depocenter were deep water areas with moderate hydrographic restriction, whereas the restriction conditions of Northern Sichuan Basin depocenter was relatively weak. In addition, due to the combined effect of geographical location, connectivity with the open Qinling Ocean, and estuarine circulation, restriction degrees varied in the same depocenter. The redox proxy (Corg/P) indicated that the lower Longmaxi Formation was deposited in an anoxic water column. There are significant spatial differences in redox conditions in different depocenters and different locations within the same depocenter, which may be controlled by relative sea level rise, hydrographic restriction, and upwelling intensity. Anoxic conditions were more likely to occur in areas where water column was relatively deep and restricted. In addition, the anoxic conditions in the Northern Sichuan Basin depocenter may also associated with the strong upwelling intensity and the behavior of P cycling back to water column, which can promote the primary productivity and further maintain persistent anoxic conditions. The correlation between Corg/P and Mo/TOC indicates that, in relatively weak restriction basin, the trace elements enrichment in sediments was controlled by trace elemental concentrations in seawater. In moderate restriction basin, the trace elements enrichment was mainly controlled by redox conditions. Whereas under more reducing conditions, hydrographic restriction may tend to become the dominant factor. The application of sediment Mo-TOC relationship, MoEF-UEF covariation, and upwelling can provide insights into hydrographic restriction conditions, but the Mo/TOC relationship is limited to anoxic facies, as little trace metal accumulation could also be the consequence of oxic conditions.

Between North and South: Buddhist Cliff Sculpture in Northern Sichuan in the First Half of the Seventh Century CE

In the first half of the seventh century CE, clusters of Buddhist cliff sculptures were carved into cliffs and boulders in Guangyuan, Mianyang, Bazhong, and other locations nestled in the northern Sichuan Basin. They mark the start of large-scale Buddhist grotto construction in Sichuan, significantly impacting the establishment of regional grotto traditions in southwestern China. Through analysis of site forms, statue types, and devotional inscriptions, this article argues that these Buddhist cliff sculptures represent a reintegration of divergent Buddhist practices and artistic conventions that emerged during the Southern and Northern Dynasties in northern and southern China. While their niche-based site structure and collective sponsorship through the yiyi association can be traced back to northern China in the prior two centuries, the sculptural style primarily reflects a regional tradition exemplified by the free-standing statues unearthed in Chengdu, central Sichuan in the Southern Dynasties. The construction of these sites, catalyzed by the influx of northern officials and monks into Sichuan toward the end of the Sui and the early Tang, provides valuable material for exploring the social integration of northern and southern China, as well as the religious dynamics between Buddhism and Daoism in northern Sichuan.

Solid bitumen Rhenium-Osmium (Re–Os) isotope geochronology and existing problems: Sampled of Sinian-Cambrian gas reservoir in Sichuan Basin, China

Understanding the key timings related to petroleum evolution is crucial for optimizing exploration targets and assessing oil/gas resources, attract petroleum geologists’ attention worldwide. Recently, hydrocarbon (oil and bitumen) Re–Os isotope dating has been innovatively applied to constrain the timing related to oil/gas generation, however, the resulting Re–Os isochron ages can be complex and challenging to interpret. This study utilizes various geochemical and geochronological data from Sinian to Cambrian natural gas reservoirs in the Sichuan Basin to reconstruct the hydrocarbon evolution process and discuss the significance of different bitumen Re–Os dating results. The gas accumulation in the Sinian-Cambrian reservoirs experienced four stages of evolution: (1) initial oil generation during the Ordovician to Silurian periods, (2) secondary oil generation during the Triassic period, (3) gas generation through thermal cracking of liquid oil from the Jurassic to Cretaceous periods, and (4) gas reservoir redistribution since the late Cretaceous. The Re–Os dates (ca. 485 Ma) of low maturity and biodegraded bitumen from the western Sichuan Basin record the oil generation during the Ordovician before the Caledonian tectonic event. The Re–Os dates (ca.184–128 Ma) of highly mature bitumen associated with MVT Pb–Zn deposits in northern Sichuan Basin provide insights into both liquid oil-cracking and thermochemical sulfate reduction (TSR) processes. The complex Re–Os dates (ca.414 Ma, ca.154 Ma) of highly mature bitumen from the central Sichuan Basin may represent different periods related to either oil or gas generation. Future studies should explore the genetic type, maturity, thermal cracking, or TSR degrees of bitumen to better understand the significance of Re–Os dates.

Sources of natural gas in the Middle-Permian carbonate succession in the central-northern Sichuan Basin, Southwest China

Natural gas-source correlation is a challenging aspect of natural gas exploration in deep strata. The Middle-Permian carbonate succession in the Sichuan Basin, southwest China, particularly in the Maokou Formation, is a hotspot for natural gas exploration. However, determining the natural gas source in the Maokou Formation is challenging because of the high maturity and complexity of potential source rocks. In this study, we analyzed the genesis and sources of natural gas in the central-northern Sichuan Basin while considering the geological conditions and systematically utilizing the gas components, stable and rare-gas isotopes, and solid bitumen biomarkers. The results indicate that (1) the natural gas in the northern Sichuan Basin comprises a mixture originating from the source rocks of the Maokou and Wujiaping formations; (2) the Qiongzhusi Formation is the major source of natural gas in the north slope (and the Maokou Formation source rock could be used as an important supplement); (3) the natural gas in the Moxi-Longnvsi structure comprises a mixture originating from the source rocks of the Qiongzhusi and Maokou formations. From south to north and west to east, the major source rocks of the gas reservoirs changed from belonging to the Qiongzhusi Formation to the Maokou and Wujiaping formations. This study is the first to combine multiple geochemical methods and consider different geological settings to identify the gas source of a deep carbonate gas reservoir. Our study provides a reliable method for determining the natural gas-source correlation of gas reservoirs that contain highly mature and complex gas sources.

A new Rhaetian plant assemblage from Zilanba, the northern Sichuan Basin, South China

A new Rhaetian plant assemblage from Zilanba, the northern Sichuan Basin, South China

Rare Earth Element Characteristics of Shales from Wufeng-Longmaxi Formations in Deep-Buried Areas of the Northern Sichuan Basin, Southern China: Implications for Provenance, Depositional Conditions, and Paleoclimate.

To explore the sedimentary environment and the background of the source area of organic-rich shales in the Wufeng-Longmaxi Formations in the northern Sichuan Basin, samples from Well XX1 in the area were subjected to geochemical testing and analysis of organic carbon content, trace elements, and rare earth elements (REEs). The results show that the total content of REE (ΣREE) of the shale in the Wufeng-Longmaxi Formations varied from 183.08 to 234.66 μg/g with an average of 212.59 μg/g, which is significantly higher than the content of the North American shale composite. The fluctuations in the total amount of REEs in the shale of the Wufeng-Longmaxi Formations reflect certain differences in the geochemical conditions of the Upper Ordovician-Lower Silurian shale. The ratios of LREE/HREE, LaN/YbN, LaN/SmN, and GdN/YbN and the distribution of normalized REE patterns indicate that the source supply or sedimentary structural background may have changed during the shale deposition period of the Wufeng Formation, while the shale deposition period of the Longmaxi Formation may be in a relatively stable source supply and sedimentary structural background. There is no significant correlation between δCe and ΣREE, and the obviously negative Eu abnormity and the weak Ce abnormity indicated that the diagenesis had a limited impact on REEs. Geochemical parameters such as values of ∑REE, δEu, δCe, Ceanom, and LaN/YbN indicate that the climate during the Wufeng-Longmaxi Formation shale deposition period was warm and humid, and the shale was deposited mainly in the suboxic-anoxic water environment. The deposition rate was stable and slow, providing good conditions for the production and preservation of organic matter. At the same time, this shows that the water environment of Wufeng Formation is more anoxic and reductive than that of Longmaxi Formation, which is more conducive to the preservation of organic matter. The correlation between ΣREE and the content of Sc, Ti, Cr, Co, Zr, Nb, Th, Hf, Ta, and other elements indicates that the sources of REEs in the shale of Wufeng and Longmaxi Formations in the study area are similar, mainly terrestrial clasts, and some may come from the sea. The REE distribution pattern shows that the shale provenance of the Wufeng-Longmaxi Formations mainly comes from the upper crust. The La/Yb-∑REE diagram shows that the sediment-parent rocks are mainly early sedimentary rocks and these sediment-parent rocks have granite provenance characteristics. Compared to La/Yb, LREE/HREE, LaN/YbN, and other REE characteristic parameters, it is inferred that the tectonic background of the study area is dominated by passive continental margin.

Early–middle Jurassic source to sink evolution and its tectonic significance in the northeastern Sichuan Basin

This paper discusses the sedimentary environment and source supply in the sedimentary area and their coupling relationship through a detailed description of the deposits from the Ziliujing Formation to Shaximiao Formation of the Lower–Middle Jurassic on the Tieshan section in the Dazhou City, northeastern Sichuan Province, through sedimentary characterization, determination of the paleocurrent direction, analysis of heavy minerals, and detrital zircon U–Pb dating. The results show that the Zhenzhuchong Member is sufficiently supplied with detrital sediments and is dominantly composed of fluvial-delta deposits. The Dongyuemiao Member—the first member of the Lianggaoshan Formation—is dominated by lacustrine deposits, with the detrital supply increased initially in the early Lianggaoshan. The second member of the Lianggaoshan Formation suggests a significant increase in detrital supply, with shrunken lake basin and changed paleocurrent direction. The Shaximiao Formation reveals a complete disappearance of the lake basin in the northern Sichuan Basin. The comprehensive analysis on source supply indicates that the change in source property is apparently coupled with the change in the sedimentary environment, both controlled by orogenesis around the basin. It is inferred from the zircon age distribution that the changes in the sedimentary environment and source supply during the late Ziliujing period and the middle and late Lianggaoshan period resulted from the uplifting of the Micangshan Mountain, Dabashan Mountain, and Qinling Mountain, respectively.

Geochemical Analysis of Dolomite in the Fourth Member of the Upper Sinian Dengying Formation, Northern Sichuan Basin, China

Geochemical Analysis of Dolomite in the Fourth Member of the Upper Sinian Dengying Formation, Northern Sichuan Basin, China

Geochemical properties, mechanism of formation, and source of solid bitumen in the Ediacaran Dengying Formation from the central to northern Sichuan Basin, China

Several large gas reservoirs, including the Weiyuan and Anyue gas fields, have been discovered in the Ediacaran Dengying Formation in the Sichuan Basin, indicating vast opportunities for deep-petroleum exploration. Understanding the origin and evolution process of these gas reservoirs is crucial for further petroleum exploration and development. Although the burial history of the Sichuan Basin and its surrounding areas is basically dominated by Paleozoic burial and preservation, and Meso-Cenozoic uplift and erosion. However, the source of the Dengying Formation natural gas in the Sichuan Basin is still a subject of controversy between the Ediacaran and Cambrian source rocks due to high thermal maturity, secondary alteration, and multistage tectonic activities. This study aims to examine the investigation on the properties and genetics of Dengying solid bitumens that existed in the central to northern Sichuan Basin, in order to provide insights into the source and evolution history of the Dengying paleo-oil reservoirs. For this purpose, petrologic, elemental, and organic geochemical analyses were used to investigate the properties, origin, and formation mechanism of solid bitumens. The results indicate that these solid bitumens have suffered intense thermal alteration (EqVRo 2.1%–5.3%), and are classified as pyrobitumens. Solid bitumens in the Gaoshiti bulge and the north slope area were subjected to tectonic thermal events (e.g., Emeishan igneous province) and relatively strong thermochemical sulfate reduction (TSR) alteration. These solid bitumens were assumed to be pyrolysis products of light (condensate) oil. In contrast, solid bitumens in the Weiyuan bulge and the Micangshan uplift area were not influenced by tectonic thermal events but experienced weak TSR alteration, and originated from either normal or heavy crude oil. Moreover, a systematic bitumen-source correlation was carried out using δ13Corg values, bound steranes, and trace element distributions. Results reveal that the solid bitumens in the central Sichuan paleo-uplift were mainly derived from the lower Cambrian Maidiping Formation, those in the north slope area originated from the lower Cambrian Qiongzhusi Formation, while those in the Micangshan area were sourced from the Ediacaran Doushantuo Formation. Structural and burial history analysis implies that the differences in the source of the Dengying paleo-oil reservoir (i.e., solid bitumen) between these study areas are attributed to the distribution of source rocks and their contact relationship with reservoirs. This research successfully obtained insights into the source and genetic mechanism of paleo-oil reservoirs by analyzing the properties of high-maturity solid bitumens, which can guide further exploration and development of deep petroleum resources.

Early to Middle Jurassic sedimentation within the northern Sichuan Basin in response to exhumation of the South Qinling orogenic belt, central China

The northern Sichuan Basin of central China is an important region for investigating the continent-continent convergence that resulted from the closure of the Palaeo-Tethys Ocean. The Early-Middle Jurassic sediments of this basin record the palaeogeography, palaeoenvironments and tectonic evolution of the southern Qinling orogenic belt, especially the Dabashan thrust belt. Detailed sedimentological investigations, coupled with provenance analyses using zircon UPb geochronology, demonstrate that during Early Jurassic times, conglomerate megafan facies extended across the northern Sichuan Basin into the Micangshan area deformed by South Dabashan thrusting and reached even as far as the Mianlue suture belt. These megafan deposits were mainly reworked from the Silurian sediments of the North Dabashan thrust belt (also called the South Qinling orogenic belt), north of the Mianlue suture. These conglomerates record the initial thrust-driven uplift and exhumation of the Qinling orogenic belt that rapidly followed the diachronous closure of the Mianlue oceanic basin. Moreover, our results show that the detrital materials of meandering stream, lacustrine and braided river delta facies that accumulated in the Middle Jurassic mainly originated from the southern Qinling orogenic belt, Mianlue suture zone and northern South China block, suggesting the southward progradation of the Dabashan fold-thrust belt onto the northern Yangtze block and the southward migration of the basin centre. These findings support a model in which the Early to Middle Jurassic evolution of the northern Sichuan Basin may have been triggered by East Asian convergence.

A New Method for Comprehensive and Quantitative Characterization of Shale Microfractures: A Case Study of the Lacustrine Shale in the Yuanba Area, Northern Sichuan Basin

Microfractures can connect isolated pores within shale, significantly increasing the shale’s storage capacity and permeability, and benefiting shale gas exploitation. Therefore, the quantitative characteristics of microfractures are important parameters for shale reservoir evaluation. In this paper, taking the Jurassic Da’anzhai Member (J1z4) lacustrine shale in the Yuanba area of the northern Sichuan Basin as an example, we propose a method for comprehensive and quantitative characterization of shale microfractures that combines rock thin section (RTS) and scanning electron microscopy (SEM) observations. The different magnifications of RTSs and SEM images lead to the identification and characterization of microfractures of different scales using these two methods. RTSs are mainly used to characterize microfractures with widths larger than 10 μm, while SEM is mainly used to characterize microfractures with widths smaller than 10 μm. These techniques can be combined to comprehensively and quantitatively characterize microfractures of different scales in shale. The microfracture characterization results show that the average total porosity of the J1z4 shale is 4.46%, and the average microfracture surface porosity is 1.20% in the Yuanba area. The calculated average percentage of microfracture porosity to total porosity is 21.09%, indicating that the J1z4 shale reservoir space is dominated by pores and has the conditions for stable shale gas production and potential for shale gas exploration. However, the percentage of microfracture porosity to total porosity of shale near faults and fold zones approaches or exceeds 50%, which may lead to the loss of shale gas. The new method proposed in this study is also useful for quantitative characterization of shale microfractures in the Sichuan Basin and other basins.

Major advancement in oil and gas exploration of Jurassic channel sandstone in Well Bazhong 1HF in northern Sichuan Basin and its significance

In January 2023, Well Bazhong 1HF in the northern Sichuan Basin obtained high-yield industrial oil flow of over 100 cubic meters from the Jurassic channel sandstone for the first time, realizing a major breakthrough. In order to provide more support for further oil and gas exploration in this area, this paper analyzes the sedimentary and reservoir characteristics of the Jurassic Lianggaoshan Formation in Bazhong region of northern Sichuan Basin and their control factors based on the exploration achievements of Well Bazhong 1HF. Then, oil and gas reservoir characteristics and oil and gas sources are comparatively analyzed. Finally, the key technologies for the exploration of channel sandstone oil and gas with multi-stage vertical superimposition, lateral migration, thin reservoir and strong heterogeneity are researched and developed, and the next oil and gas exploration direction in the Lianggaoshan Formation of northern Sichuan Basin is pointed out. And the following research results are obtained. First, in the second member of Lianggaoshan Formation (“Liang 2 Member” for short) in Bazhong region, multi-stage underwater distributary sand bodies of delta front are developed with sandstone thickness of about 25 m and average porosity of 5.6%. The pore types are mainly primary intergranular pores and feldspar/debris intragranular dissolved pores, the pore throat structure is good, and the development of good-quality reservoirs is controlled by the sedimentary microfacies of underwater distributary channel. Second, the oil and gas reservoir of Liang 2 Member is a highly oil-bearing condensate gas reservoir/volatile oil reservoir, whose oil and gas is mainly sourced from the semi-deep lacustrine shale of Liang 1 and 2 Members. Third, channel sand bodies are superimposed and developed continuously in the upper part of Liang 2 and Liang 3 Members, and the source-reservoir configuration is good, with the characteristics of near-source hydrocarbon accumulation and overpressure hydrocarbon enrichment. Fourth, for the channel sandstones with multi-stage vertical superimposition, lateral migration, thin reservoir and strong heterogeneity, the reservoir prediction technology of “high-frequency sequence stratigraphy slice, seismic frequency decomposition and facies-constrained seismic waveform indication inversion” is developed to precisely characterize the “sweet spot” target of narrow channel sandstone, and the key fracturing technology of “dense cutting + composite temporary plugging + high-intensity proppant injection + imbibition and oil-increasing” is formed to realize the large-scale reconstruction of channel sandstone reservoir. In conclusion, the breakthrough of Well Bazhong 1HF in the exploration of Lianggaoshan Formation oil and gas in Bazhong region reveals the huge potential of Jurassic oil and gas exploration in the Sichuan Basin, and plays a positive role in promoting the exploration and development of the Jurassic channel sandstone oil and gas in the Sichuan Basin.

Prediction of Permian karst reservoirs in the Yuanba gas field, northern Sichuan Basin, China

Karst reservoir has great hydrocarbon potential, however karst reservoir prediction is inhibited by the strong lateral and vertical heterogeneity of karstification which in turn results in recognition difficulty when geological and geophysical methods are used in isolation. Combined geological and geophysical methods, including core observation, thin section analysis, well log interpretation, seismic attributes and seismic inversion are applied to understand the depositional environment, types of karstification, the geophysical response and distribution of karst reservoir and the controls over and evolution model of karst reservoir in Permian Yuanba gas field, northern Sichuan Basin. The results show that there are four types of major seismic facies recognized in the study area, which correspond to platform margin reef, carbonate platform, platform margin inter-bay and platform margin slope. Karstification can be divided into three zones: the supergene karst zone, the vertical seepage zone and the horizontal underflow zone, among which the supergene karst zone have the strongest karstification. Karstification is highlighted with low seismic impedance, low Poisson's ratio, and high seismic attenuation on seismic inversion as well as micro scale paleo geomorphology recognized by trend surface analysis. By comparing the distribution of karstification with paleo geomorphology, fault distribution and gas contents, it can be observed that the karstification have a good matching relationship with these factors. The dominant type of karstification is epigenic karst, which is strongly influenced by depositional facies and paleo geomorphology. Fracture networks have contributed to karstification but are not the dominant factor of karst formation. The integration of geological and geophysical methods can predict karst reservoir with high accuracy within large area and can be applied to karst reservoir hydrocarbon exploration of similar geological setting.

Multistage dolomitization of deeply buried dolomite in the Lower Cambrian Canglangpu Formation, central and northern Sichuan Basin

The dolostone units in the Cambrian Changlangpu Formation of the Sichuan Basin have demonstrated substantial potential for natural gas exploration. A systematic understanding of the various dolomite (and non-carbonate) phases that build these rocks and the diagenetic pathways of the Canglangpu Formation carbonates still needs to be developed. This study combines the petrographic properties of dolomite (and non-carbonate) phases with their geochemical evidence (carbon, oxygen and 87Sr/86Sr isotope data). Moreover, fluid inclusion evidence and in situ rare-earth element (REE) data are presented. The samples studied were taken from hand specimens collected in the field and plugs from cores to explore the properties and evolutions of dolomite in the Cambrian Canglangpu Formation in the central-northern Sichuan Basin. Six dolomite phases are identified: silty crystalline dolomite (D1), fabric-retentive dolomite (D2), fabric-destructive dolomite (D3), fine crystalline dolomite (D4), medium to coarse crystalline dolomite cement (C1a and C1b) and saddle dolomite cement (C2). Silty crystalline dolomite represents the earliest dolomitization and shows δ18O values comparable to those of Cambrian seawater. Fabric-retentive dolomite, fabric-destructive dolomite and fine crystalline dolomite represent reflux dolomitization during shallow burial. Specifically, Fine crystalline dolomite with a turbid-core and clean-rim may have recrystallized from secondary dolomitization of marine-derived porewater. Fabric-destructive dolomite shows the depleted δ13C values, resulting from the secondary dolomitization involving organics degradation in medium to deep burial environment. The fluid inclusion data demonstrates that the medium to coarse crystalline dolomite cement (C1a) formed in relatively elevated temperature and salinity brines. Intrusion of sulfur- and metal-rich (Zn and Fe) medium-temperature hydrothermal fluids gave rise to the formation of medium to coarse crystalline dolomite cement (C1b) and sphalerite mineralization. Cementation of saddle dolomite was promoted by sulfate-rich reducing hydrothermal fluids. δ13C depletion, extremely low REE content and positive δEu in the saddle dolomite cement suggest the presence of thermal sulfate reduction.

Depositional processes of the mixed siliciclastic-carbonate system in the Lower Cambrian Xiannüdong Formation in the northern Sichuan Basin, South China

Mixed siliciclastic-carbonate systems contain significant heterogeneity of facies associations which complicates the interpretation of depositional environments and platform evolution. The Lower Cambrian Xiannüdong Formation in the northern Sichuan Basin was deposited in a mixed system which is characterized by the non-skeleton grain (ooids and microbialites) dominated carbonates mixed with siliciclastic sediments. Such a depositional system provides a template to decipher the facies variability of mixed depositional systems and the evolution of platform geometry. Based on the facies analysis in outcrops and drilling wells, seventeen lithofacies were identified and grouped into seven lithofacies associations which represents a shallow-marine environment dominated by wave and storm activities. The vertical stacking pattern of lithofacies in the Xiannüdong Formation archives a regressive cycle which can be subdivided into four sub-cycles (i.e., S1 to S4). All the four sub-cycles exhibit the characteristic of the shallowing-upward successions, which are overlain by a flooding unit. The spatial distribution of lithofacies suggests an eastward-inclined platform. The migrating ooid shoals together with the storm activities may prevent the platform from evolving into a rimmed shelf. The lateral and vetical distribution of the terrigenous materials indicates that the provenance of terrigenous sediments were mainly sourced from the Kangdian and Bikou massifs, which indicates that the mixed system and the provenance area were separated by the Mianyang-Changning trough. Therefore, the transport of siliciclastic materials was related to the available accommodation space on the shelf, and was controlled by the eustatic sea-level fluctuation, with increased input of siliciclastic material occurred during phases of relative sea-level rise. The input of siliciclastic sediments brings nutrition for the growth of algal–archaeocyathan mounds, and therefore the mounds were mainly developed in the lower part of Xiannüdong Formation. Moreover, high siliciclastic sediments influx would also influence the growth of ooids by serving nuclei and promoting abrasion, which resulted in smaller ooid size compared to those of the relatively pure oolite. This study provides clues to understanding the facies variability in mixed systems and servers as a valuable reference for studies of other similar platforms.

WITHDRAWN:Prediction of Permian karst reservoirs in the Yuanba gas field, northern Sichuan Basin, China

WITHDRAWN:Prediction of Permian karst reservoirs in the Yuanba gas field, northern Sichuan Basin, China

Isostatic Anomaly and Isostatic Additional Force Analysis by Multiple Geodetic Observations in Qinling Area

Determination of the isostatic anomaly and the isostatic additional force plays a key role in understanding the deep tectonic features and dynamics in the Qinling area. At present, high-accuracy observation gravity data are one of the important means to obtain the isostatic anomaly and the isostatic additional force. Firstly, we calculate the free-air gravity anomalies and the Bouguer gravity anomalies by using hybrid gravity and GPS observation data. Then, we invert the isostatic anomaly and the isostatic additional force. The results show that the isostatic depth calculated by Airy isostatic theory is 40–49 km, and the Moho depth is 39–48 km. The Weihe Basin is in a non-isostatic state with an upward isostatic additional force that reached about 20 MPa. The isostatic anomaly and the isostatic additional force are approximately zero in the northern Sichuan Basin, which indicates that the crust is in isostatic state. The negative isostatic anomaly and isostatic additional force in Liupanshan Mountains, the southwest margin of the Ordos Basin, and the local areas of the Qinling Orogen and Dabashan indicate the existence of crustal movement. By combining the measurement of InSAR, we obtain the surface deformation information of the Weihe Basin, as well as an upward trend, which proves that the result is highly consistent with the gravity observation.

Characterization of natural fractures in tight sandstone reservoirs in Yuanba area, northern Sichuan Basin

Natural fractures are quite important for the high and stable production of tight sandstone gas reservoirs. However, it is commonly difficult to accurately characterize their distribution in tight sandstone gas reservoirs due to the strong heterogeneity. A comprehensive characterization of natural fractures in tight sandstone gas reservoirs of the Xujiahe Formation in the Yuanba area, Sichuan Basin, was carried out by multimethod of core description, log interpretation and seismic prediction. The results show that (1) the natural fractures in the Xujiahe Formation are mainly low-angle fractures, with a few medium- and high-angle fractures. The degree of fracture development is mainly controlled by the distance from the fault, the flexural degree of the strata and the thickness of the rock mechanical layer. (2) The fracture-sensitive seismic attributes such as the preferred maximum likelihood, structure entropy, illuminant-based symmetry and high-precision curvature are taken as the input, and the unsupervised cluster analysis algorithm based on Bayesian probability model is applied to predict the distribution of large-scale fractures at different dip angles; on the basis of narrow azimuthal pre-stack CMP gather optimization, the anisotropy detection technique of Hampson-Russell's ProAZ full CMP gather is used to characterize the distribution of small- and medium-scale fractures, and the predicted fracture development intensity matches the fracture interpretation results of the imaging logs by more than 85%. Moreover, the predicted fracture orientation is basically consistent with that of the imaging loggings. (3) The fault-genesis fractures of the Xujiahe Formation are mainly distributed near the fault on the southeast flank of the Jiulongshan anticline, and are distributed in a narrow strip in NE direction. The fold-genesis fractures are mainly developed in the Xu 3rd Member, and are located in the axis of the Jiulongshan anticline and its southeast flank where the strata are strongly flexed. This study provides a solid foundation for the development of tight sandstone gas reservoirs and extends the approaches for the accurate characterization of fractures.

Impact of diagenesis on the microbial reservoirs of the terminal Ediacaran Dengying Formation from the Central to Northern Sichuan Basin, SW China

The central part of the Sichuan Basin shows an excellent exploration potential in the dolomitized microbial reservoirs of the Dengying Formation. However, the influence of diagenesis on the formation of high-quality reservoirs is unclear. This study aims to establish the parasequence of the diagenesis in microbial reservoirs and decipher its control on the quality of microbialite-dominated reservoirs. The microbialite consists of stromatolites and thrombolites in the Dengying Formation, which firstly underwent meteoric alteration in the early diagenetic stage. Subsequently, the microbialites experienced fibrous and bladed dolomite cementation and dolomitization. Laminated and clotted sedimentary fabrics are well-preserved in dolomite with less than 100 μm in crystal-sizes. The carbon (δ13C), oxygen (δ18O), and strontium (87Sr/86Sr) isotopes in the microbial dolomite are similar to the Ediacaran seawater, indicating the marine origin of the dolomitizing fluid. The carbon, oxygen and strontium isotopes of the fibrous and bladed dolomite cements are closed to the microbial matrix, which means that the diagenetic fluid is originated from the coeval seawater. The medium-coarse crystalline granular dolomite cement filled later than the fibrous cement, and the oxygen isotope of this cement was affected by the recrystallization caused by the temperature rise after burial. Finally, the saddle dolomite cement filled in fractures and veins. The δ13C (1.1 ± 1.3‰) value of saddle dolomite is similar to the matrix and early cement, while the δ18O value is significantly negative (−10.9 ± 1.0‰). The high Mn (751.4 ± 570.0 ppm), Fe (3872.5 ± 3347.9 ppm) concentrations, homogenization temperature (194 ± 26 °C) derived from the fluid inclusion and concomitant silicification suggest its formation of Fe-rich high-temperature burial fluid. For the microbialite-dominated reservoir, its initial porosity is high. The porosity and permeability characteristics show dissolution-specific behavior, suggesting a key factor of meteoric diagenesis in enhancing the reservoir. The early dolomitization enhance the resistance to the compaction and pressure dissolution. For the geophysical properties, the cementation of marine-derived fluids occupies the most pore space (∼28.1%), followed by compaction and stylolitization that reduce porosity by 10–13%. The hydrothermal alteration, organic acid dissolution, and thermochemical sulfate reduction slightly influence the reservoir quality. This study provides further understanding on the mechanism of microbial reservoirs and enlightens the further exploration of Precambrian successions.